kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-26 18:16:26 +00:00
Code Issues Releases Packages Activity
linux/scripts/basic/fixdep.c

400 lines
9.8 KiB
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: move autoconf.h to include/generated Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-10-18 00:49:24 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: move autoconf.h to include/generated Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-10-18 00:49:24 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: move autoconf.h to include/generated Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-10-18 00:49:24 +02:00
fixdep: trivial: typo fix and correction Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-08 21:20:50 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kbuild: fix dependency generation Commit 2e3646e51b2d6415549b310655df63e7e0d7a080 changed the way the split config tree is built, but failed to also adjust fixdep accordingly - if changing a config option from or to m, files referencing the respective CONFIG_..._MODULE (but not the corresponding CONFIG_...) didn't get rebuilt. The problem is that trisate symbol are represent with three different symbols: SYMBOL=n => no symbol defined SYMBOL=y => CONFIG_SYMBOL defined to '1' SYMBOL=m => CONFIG_SYMBOL_MODULE defined to '1' But conf_split_config do not distingush between the =y and =m case, so only the =y case is honoured. This is fixed in fixdep so when a CONFIG symbol with _MODULE is found we skip that part and only look for the CONFIG_SYMBOL version. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-29 10:27:14 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: trivial: typo fix and correction Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-08 21:20:50 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: move autoconf.h to include/generated Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-10-18 00:49:24 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: trivial: typo fix and correction Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-08 21:20:50 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: add static to prototypes Warnings found via gcc -Wmissing-prototypes. Signed-off-by: Trevor Keith <tsrk@tsrk.net> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-18 12:49:23 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: accept extra dependencies on stdin ... and merge them in the list of parsed dependencies. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2016-02-12 15:00:50 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: accept extra dependencies on stdin ... and merge them in the list of parsed dependencies. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2016-02-12 15:00:50 -05:00
fixdep: move global variables to local variables of main() I do not mind global variables where they are useful enough. In this case, I do not see a good reason to use global variables since they are just referenced in shallow places. It is easy to pass them via function arguments. I squashed print_cmdline() into main() since it is just one line code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:44 +09:00
fixdep: accept extra dependencies on stdin ... and merge them in the list of parsed dependencies. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2016-02-12 15:00:50 -05:00
fixdep: move global variables to local variables of main() I do not mind global variables where they are useful enough. In this case, I do not see a good reason to use global variables since they are just referenced in shallow places. It is easy to pass them via function arguments. I squashed print_cmdline() into main() since it is just one line code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:44 +09:00
fixdep: accept extra dependencies on stdin ... and merge them in the list of parsed dependencies. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2016-02-12 15:00:50 -05:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use hash table instead of a single array I noticed fixdep uses ~2% of cpu time in kernel build, in function use_config() fixdep spends a lot of cpu cycles in linear searches in its internal string array. With about 400 stored strings per dep file, this begins to be noticeable. Convert fixdep to use a hash table. kbuild results on my x86_64 allmodconfig Before patch : real 10m30.414s user 61m51.456s sys 8m28.200s real 10m12.334s user 61m50.236s sys 8m30.448s real 10m42.947s user 61m50.028s sys 8m32.380s After: real 10m8.180s user 61m22.506s sys 8m32.384s real 10m35.039s user 61m21.654s sys 8m32.212s real 10m14.487s user 61m23.498s sys 8m32.312s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-09 16:29:27 +01:00
fixdep: accept extra dependencies on stdin ... and merge them in the list of parsed dependencies. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2016-02-12 15:00:50 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use existing helper to check modular CONFIG options str_ends_with() tests if the given token ends with a particular string. Currently, it is used to check file paths without $(srctree). Actually, we have one more place where this helper is useful. Use it to check if CONFIG option ends with _MODULE. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:46 +09:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
fixdep: remove some false CONFIG_ matches The string CONFIG_ quite often appears after other alphanumerics, meaning that that instance cannot be referencing a Kconfig symbol. Omitting these means make has fewer files to stat() when deciding what needs to be rebuilt - for a defconfig build, this seems to remove about 2% of the (wildcard ...) lines from the .o.cmd files. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-28 20:17:36 +01:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
fixdep: remove some false CONFIG_ matches The string CONFIG_ quite often appears after other alphanumerics, meaning that that instance cannot be referencing a Kconfig symbol. Omitting these means make has fewer files to stat() when deciding what needs to be rebuilt - for a defconfig build, this seems to remove about 2% of the (wildcard ...) lines from the .o.cmd files. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-28 20:17:36 +01:00
kbuild: fixdep: optimize code slightly If the target string matches "CONFIG_", move the pointer p forward. This saves several 7-chars adjustments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-07-24 14:18:45 +09:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
fixdep: use existing helper to check modular CONFIG options str_ends_with() tests if the given token ends with a particular string. Currently, it is used to check file paths without $(srctree). Actually, we have one more place where this helper is useful. Use it to check if CONFIG option ends with _MODULE. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:46 +09:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: fixdep: Check fstat(2) return value Coverity has recently added a check that will find when we don't check the return code from fstat(2). Copy/paste the checking logic that print_deps() has with an appropriate re-wording of the perror() message. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-12-07 16:26:08 -05:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
kbuild: fixdep: Check fstat(2) return value Coverity has recently added a check that will find when we don't check the return code from fstat(2). Copy/paste the checking logic that print_deps() has with an appropriate re-wording of the perror() message. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-12-07 16:26:08 -05:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
fixdep: exit with error code in error branches of do_config_file() do_config_file() should exit with an error code on internal run-time errors, and not return if it fails as then the error in do_config_file() would go unnoticed in the current code and allow the build to continue. The exit with error code will make the build fail in those very exceptional cases. If this occurs, this actually indicates a deeper problem in the execution of the kernel build process. Now, in these error cases, we do not explicitly free memory and close the file handlers in do_config_file(), as this is covered by exit(). This issue in the fixdep script was introduced with its initial implementation back in 2002 by the original author Kai Germaschewski with this commit 04bd72170653 ("kbuild: Make dependencies at compile time") in the linux history git tree, i.e., git://git.kernel.org/pub/scm/linux/kernel/git/history/history.git. This issue was identified during the review of a previous patch that intended to address a memory leak detected by a static analysis tool. Link: https://lkml.org/lkml/2017/12/14/736 Suggested-by: Nicholas Mc Guire <der.herr@hofr.at> Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-08 11:04:01 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
fixdep: exit with error code in error branches of do_config_file() do_config_file() should exit with an error code on internal run-time errors, and not return if it fails as then the error in do_config_file() would go unnoticed in the current code and allow the build to continue. The exit with error code will make the build fail in those very exceptional cases. If this occurs, this actually indicates a deeper problem in the execution of the kernel build process. Now, in these error cases, we do not explicitly free memory and close the file handlers in do_config_file(), as this is covered by exit(). This issue in the fixdep script was introduced with its initial implementation back in 2002 by the original author Kai Germaschewski with this commit 04bd72170653 ("kbuild: Make dependencies at compile time") in the linux history git tree, i.e., git://git.kernel.org/pub/scm/linux/kernel/git/history/history.git. This issue was identified during the review of a previous patch that intended to address a memory leak detected by a static analysis tool. Link: https://lkml.org/lkml/2017/12/14/736 Suggested-by: Nicholas Mc Guire <der.herr@hofr.at> Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-08 11:04:01 +01:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
fixdep: faster CONFIG_ search Do you think kernel build is 100% dominated by gcc? You are wrong! One small utility called "fixdep" consistently manages to sneak into profile's first page (unless you have small monitor of course). The choke point is this clever code: for (; m < end; m++) { if (*m == INT_CONF) { p = (char *) m ; goto conf; } if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } 4 branches per 4 characters is not fast. Use strstr(3), so that SSE2 etc can be used. With this patch, fixdep is so deep at the bottom, it is hard to find it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-24 21:03:05 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: refactor parse_dep_file() parse_dep_file() has too much indentation, and puts the code far to the right. This commit refactors the code and reduces the one level of indentation. strrcmp() computes 'slen' by itself, but the caller already knows the length of the token, so 'slen' can be passed via function argument. With this, we can swap the order of strrcmp() and "*p = \0;" Also, strrcmp() is an ambiguous function name. Flip the logic and rename it to str_ends_with(). I added a new helper is_ignored_file() - this returns 1 if the token represents a file that should be ignored. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:45 +09:00
kbuild: Fix computing srcversion for modules Recent change to fixdep: commit b7bd182176960fdd139486cadb9962b39f8a2b50 Author: Michal Marek <mmarek@suse.cz> Date: Thu Feb 17 15:13:54 2011 +0100 fixdep: Do not record dependency on the source file itself changed the format of the *.cmd files without realizing that it is also used by modpost. Put the path to the source file to the file back, in a special variable, so that modpost sees all source files when calculating srcversion for modules. Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-11 22:34:47 +01:00
fixdep: move global variables to local variables of main() I do not mind global variables where they are useful enough. In this case, I do not see a good reason to use global variables since they are just referenced in shallow places. It is easy to pass them via function arguments. I squashed print_cmdline() into main() since it is just one line code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:44 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] Kill signed chars scripts/ is full of mismatches between char* params an signed char* arguments, and viceversa. gcc4 now complaints loud about this. Patch below deletes all those 'signed'. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 14:59:22 -07:00
fixdep: use malloc() and read() to load dep_file to buffer Commit dee81e988674 ("fixdep: faster CONFIG_ search") changed how to read files in which CONFIG options are searched. It used malloc() and read() instead of mmap() because it needed to zero-terminate the buffer in order to use strstr(). print_deps() was left untouched since there was no reason to change it. Now, I have two motivations to change it in the same way. - do_config_file() and print_deps() do quite similar things; they open a file, load it onto memory, and pass it to a parser function. If we use malloc() and read() for print_deps() too, we can factor out the common code. (I will do this in the next commit.) - parse_dep_file() copies each token to a temporary buffer because it needs to zero-terminate it to be passed to printf(). It is not possible to modify the buffer directly because it is mmap'ed with O_RDONLY. If we load the file content into a malloc'ed buffer, we can insert '\0' after each token, and save memcpy(). (I will do this in the commit after next.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:41 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use malloc() and read() to load dep_file to buffer Commit dee81e988674 ("fixdep: faster CONFIG_ search") changed how to read files in which CONFIG options are searched. It used malloc() and read() instead of mmap() because it needed to zero-terminate the buffer in order to use strstr(). print_deps() was left untouched since there was no reason to change it. Now, I have two motivations to change it in the same way. - do_config_file() and print_deps() do quite similar things; they open a file, load it onto memory, and pass it to a parser function. If we use malloc() and read() for print_deps() too, we can factor out the common code. (I will do this in the next commit.) - parse_dep_file() copies each token to a temporary buffer because it needs to zero-terminate it to be passed to printf(). It is not possible to modify the buffer directly because it is mmap'ed with O_RDONLY. If we load the file content into a malloc'ed buffer, we can insert '\0' after each token, and save memcpy(). (I will do this in the commit after next.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:41 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
fixdep: use malloc() and read() to load dep_file to buffer Commit dee81e988674 ("fixdep: faster CONFIG_ search") changed how to read files in which CONFIG options are searched. It used malloc() and read() instead of mmap() because it needed to zero-terminate the buffer in order to use strstr(). print_deps() was left untouched since there was no reason to change it. Now, I have two motivations to change it in the same way. - do_config_file() and print_deps() do quite similar things; they open a file, load it onto memory, and pass it to a parser function. If we use malloc() and read() for print_deps() too, we can factor out the common code. (I will do this in the next commit.) - parse_dep_file() copies each token to a temporary buffer because it needs to zero-terminate it to be passed to printf(). It is not possible to modify the buffer directly because it is mmap'ed with O_RDONLY. If we load the file content into a malloc'ed buffer, we can insert '\0' after each token, and save memcpy(). (I will do this in the commit after next.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:41 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use malloc() and read() to load dep_file to buffer Commit dee81e988674 ("fixdep: faster CONFIG_ search") changed how to read files in which CONFIG options are searched. It used malloc() and read() instead of mmap() because it needed to zero-terminate the buffer in order to use strstr(). print_deps() was left untouched since there was no reason to change it. Now, I have two motivations to change it in the same way. - do_config_file() and print_deps() do quite similar things; they open a file, load it onto memory, and pass it to a parser function. If we use malloc() and read() for print_deps() too, we can factor out the common code. (I will do this in the next commit.) - parse_dep_file() copies each token to a temporary buffer because it needs to zero-terminate it to be passed to printf(). It is not possible to modify the buffer directly because it is mmap'ed with O_RDONLY. If we load the file content into a malloc'ed buffer, we can insert '\0' after each token, and save memcpy(). (I will do this in the commit after next.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:41 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use malloc() and read() to load dep_file to buffer Commit dee81e988674 ("fixdep: faster CONFIG_ search") changed how to read files in which CONFIG options are searched. It used malloc() and read() instead of mmap() because it needed to zero-terminate the buffer in order to use strstr(). print_deps() was left untouched since there was no reason to change it. Now, I have two motivations to change it in the same way. - do_config_file() and print_deps() do quite similar things; they open a file, load it onto memory, and pass it to a parser function. If we use malloc() and read() for print_deps() too, we can factor out the common code. (I will do this in the next commit.) - parse_dep_file() copies each token to a temporary buffer because it needs to zero-terminate it to be passed to printf(). It is not possible to modify the buffer directly because it is mmap'ed with O_RDONLY. If we load the file content into a malloc'ed buffer, we can insert '\0' after each token, and save memcpy(). (I will do this in the commit after next.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:41 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use malloc() and read() to load dep_file to buffer Commit dee81e988674 ("fixdep: faster CONFIG_ search") changed how to read files in which CONFIG options are searched. It used malloc() and read() instead of mmap() because it needed to zero-terminate the buffer in order to use strstr(). print_deps() was left untouched since there was no reason to change it. Now, I have two motivations to change it in the same way. - do_config_file() and print_deps() do quite similar things; they open a file, load it onto memory, and pass it to a parser function. If we use malloc() and read() for print_deps() too, we can factor out the common code. (I will do this in the next commit.) - parse_dep_file() copies each token to a temporary buffer because it needs to zero-terminate it to be passed to printf(). It is not possible to modify the buffer directly because it is mmap'ed with O_RDONLY. If we load the file content into a malloc'ed buffer, we can insert '\0' after each token, and save memcpy(). (I will do this in the commit after next.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:41 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
fixdep: refactor parse_dep_file() parse_dep_file() has too much indentation, and puts the code far to the right. This commit refactors the code and reduces the one level of indentation. strrcmp() computes 'slen' by itself, but the caller already knows the length of the token, so 'slen' can be passed via function argument. With this, we can swap the order of strrcmp() and "*p = \0;" Also, strrcmp() is an ambiguous function name. Flip the logic and rename it to str_ends_with(). I added a new helper is_ignored_file() - this returns 1 if the token represents a file that should be ignored. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:45 +09:00
fixdep: remove unneeded memcpy() in parse_dep_file() Each token in the depfile is copied to the temporary buffer 's' to terminate the token with zero. We do not need to do this any more because the parsed buffer is now writable. Insert '\0' directly in the buffer without calling memcpy(). <limits.h> is no longer necessary. (It was needed for PATH_MAX). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:43 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
fixdep: refactor parse_dep_file() parse_dep_file() has too much indentation, and puts the code far to the right. This commit refactors the code and reduces the one level of indentation. strrcmp() computes 'slen' by itself, but the caller already knows the length of the token, so 'slen' can be passed via function argument. With this, we can swap the order of strrcmp() and "*p = \0;" Also, strrcmp() is an ambiguous function name. Flip the logic and rename it to str_ends_with(). I added a new helper is_ignored_file() - this returns 1 if the token represents a file that should be ignored. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:45 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
fixdep: refactor parse_dep_file() parse_dep_file() has too much indentation, and puts the code far to the right. This commit refactors the code and reduces the one level of indentation. strrcmp() computes 'slen' by itself, but the caller already knows the length of the token, so 'slen' can be passed via function argument. With this, we can swap the order of strrcmp() and "*p = \0;" Also, strrcmp() is an ambiguous function name. Flip the logic and rename it to str_ends_with(). I added a new helper is_ignored_file() - this returns 1 if the token represents a file that should be ignored. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:45 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
fixdep: refactor parse_dep_file() parse_dep_file() has too much indentation, and puts the code far to the right. This commit refactors the code and reduces the one level of indentation. strrcmp() computes 'slen' by itself, but the caller already knows the length of the token, so 'slen' can be passed via function argument. With this, we can swap the order of strrcmp() and "*p = \0;" Also, strrcmp() is an ambiguous function name. Flip the logic and rename it to str_ends_with(). I added a new helper is_ignored_file() - this returns 1 if the token represents a file that should be ignored. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:45 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
fixdep: refactor parse_dep_file() parse_dep_file() has too much indentation, and puts the code far to the right. This commit refactors the code and reduces the one level of indentation. strrcmp() computes 'slen' by itself, but the caller already knows the length of the token, so 'slen' can be passed via function argument. With this, we can swap the order of strrcmp() and "*p = \0;" Also, strrcmp() is an ambiguous function name. Flip the logic and rename it to str_ends_with(). I added a new helper is_ignored_file() - this returns 1 if the token represents a file that should be ignored. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:45 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: use malloc() and read() to load dep_file to buffer Commit dee81e988674 ("fixdep: faster CONFIG_ search") changed how to read files in which CONFIG options are searched. It used malloc() and read() instead of mmap() because it needed to zero-terminate the buffer in order to use strstr(). print_deps() was left untouched since there was no reason to change it. Now, I have two motivations to change it in the same way. - do_config_file() and print_deps() do quite similar things; they open a file, load it onto memory, and pass it to a parser function. If we use malloc() and read() for print_deps() too, we can factor out the common code. (I will do this in the next commit.) - parse_dep_file() copies each token to a temporary buffer because it needs to zero-terminate it to be passed to printf(). It is not possible to modify the buffer directly because it is mmap'ed with O_RDONLY. If we load the file content into a malloc'ed buffer, we can insert '\0' after each token, and save memcpy(). (I will do this in the commit after next.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:41 +09:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: fixdep: support concatenated dep files The current use-case for fixdep is: a source file is run through a single processing step, which creates a single dependency file as a side-effect, which fixdep transforms into the file used by the kernel build process. In order to transparently run the C pre-processor on device-tree files, we wish to run both gcc -E and dtc on a source file in a single rule. This generates two dependency files, which must be transformed together into the file used by the kernel build process. This change modifies fixdep so it can process the concatenation of multiple separate input dependency files, and produce a correct unified output. The code changes have the slight benefit of transforming the loop in parse_dep_file() into more of a lexer/tokenizer, with the loop body being more of a parser. Previously, some of this logic was mixed together before the loop. I also added some comments, which I hope are useful. Benchmarking shows that on a cross-compiled ARM tegra_defconfig build, there is less than 0.5 seconds speed decrease with this change, on top of a build time of ~2m24s. This is probably within the noise. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-03-06 10:27:45 -07:00
fixdep: move global variables to local variables of main() I do not mind global variables where they are useful enough. In this case, I do not see a good reason to use global variables since they are just referenced in shallow places. It is easy to pass them via function arguments. I squashed print_cmdline() into main() since it is just one line code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:44 +09:00
fixdep: accept extra dependencies on stdin ... and merge them in the list of parsed dependencies. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2016-02-12 15:00:50 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: move global variables to local variables of main() I do not mind global variables where they are useful enough. In this case, I do not see a good reason to use global variables since they are just referenced in shallow places. It is easy to pass them via function arguments. I squashed print_cmdline() into main() since it is just one line code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:44 +09:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
fixdep: accept extra dependencies on stdin ... and merge them in the list of parsed dependencies. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2016-02-12 15:00:50 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
fixdep: move global variables to local variables of main() I do not mind global variables where they are useful enough. In this case, I do not see a good reason to use global variables since they are just referenced in shallow places. It is easy to pass them via function arguments. I squashed print_cmdline() into main() since it is just one line code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:44 +09:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
fixdep: move global variables to local variables of main() I do not mind global variables where they are useful enough. In this case, I do not see a good reason to use global variables since they are just referenced in shallow places. It is easy to pass them via function arguments. I squashed print_cmdline() into main() since it is just one line code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:44 +09:00
fixdep: factor out common code for reading files Now, do_config_files() and print_deps() are almost the same. Only the difference is the parser function called (parse_config_file vs parse_dep_file). We can reduce the code duplication by factoring out the common code into read_file() - this function allocates a buffer and loads a file to it. It returns the pointer to the allocated buffer. (As before, it bails out by exit(2) for any error.) The caller must free the buffer when done. Having empty source files is possible; fixdep should simply skip them. I deleted the "st.st_size == 0" check, so read_file() allocates 1-byte buffer for an empty file. strstr() will immediately return NULL, and this is what we expect. On the other hand, an empty dep_file should be treated as an error. In this case, parse_dep_file() will error out with "no targets found" and it is a correct error message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-11 22:05:42 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00