kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-26 18:16:26 +00:00
Code Issues Releases Packages Activity
linux/arch/arm/Kconfig.debug

1858 lines
62 KiB
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: 8735/1: mm: dump: make page table dumping reusable This patch refactors the arm page table dumping code, so multiple tables may be registered with the framework. This patch refers below commits of arm64. (4674fdb9f149 ("arm64: mm: dump: make page table dumping reusable")) (4ddb9bf83349 ("arm64: dump: Make ptdump debugfs a separate option")) Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-12 01:41:09 +01:00
ARM: add support to dump the kernel page tables This patch allows the kernel page tables to be dumped via a debugfs file, allowing kernel developers to check the layout of the kernel page tables and the verify the various permissions and type settings. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-23 16:13:02 +01:00
ARM: 8379/1: disable CONFIG_PTDUMP on !MMU It's obviously pointless to dump page tables when the MMU is disabled, and even trying to build this code results in numerous build errors like these: ../arch/arm/mm/dump.c:56:11: error: 'L_PTE_USER' undeclared here (not in a function) .mask = L_PTE_USER, ^ ../arch/arm/mm/dump.c:61:11: error: 'L_PTE_RDONLY' undeclared here (not in a function) .mask = L_PTE_RDONLY, ^ ../arch/arm/mm/dump.c:66:11: error: 'L_PTE_XN' undeclared here (not in a function) .mask = L_PTE_XN, ^ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-26 16:07:51 +01:00
ARM: 8735/1: mm: dump: make page table dumping reusable This patch refactors the arm page table dumping code, so multiple tables may be registered with the framework. This patch refers below commits of arm64. (4674fdb9f149 ("arm64: mm: dump: make page table dumping reusable")) (4ddb9bf83349 ("arm64: dump: Make ptdump debugfs a separate option")) Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-12 01:41:09 +01:00
ARM: add support to dump the kernel page tables This patch allows the kernel page tables to be dumped via a debugfs file, allowing kernel developers to check the layout of the kernel page tables and the verify the various permissions and type settings. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-23 16:13:02 +01:00
ARM: 8737/1: mm: dump: add checking for writable and executable Page mappings with full RWX permissions are a security risk. x86, arm64 has an option to walk the page tables and dump any bad pages. (1404d6f13e47 ("arm64: dump: Add checking for writable and exectuable pages")) Add a similar implementation for arm. Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-12 01:43:57 +01:00
ARM: 8747/1: make CONFIG_DEBUG_WX depend on MMU Without CONFIG_MMU, this results in a build failure: ./arch/arm/include/asm/memory.h:92:23: error: initializer element is not constant #define VECTORS_BASE vectors_base arch/arm/mm/dump.c:32:4: note: in expansion of macro 'VECTORS_BASE' { VECTORS_BASE, "Vectors" }, arch/arm/mm/dump.c:71:11: error: 'L_PTE_USER' undeclared here (not in a function); did you mean 'VTIME_USER'? .mask = L_PTE_USER, ^~~~~~~~~~ Obviously the feature only makes sense with an MMU, so let's add the dependency here. Fixes: a8e53c151fe7 ("ARM: 8737/1: mm: dump: add checking for writable and executable") Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-02-28 14:56:07 +01:00
ARM: 8737/1: mm: dump: add checking for writable and executable Page mappings with full RWX permissions are a security risk. x86, arm64 has an option to walk the page tables and dump any bad pages. (1404d6f13e47 ("arm64: dump: Add checking for writable and exectuable pages")) Add a similar implementation for arm. Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-12 01:43:57 +01:00
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:56:34 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Thumb-2: Add Thumb-2 support to the build files This patch adds the necessary entries to the Makefile and Kconfig files for building the Thumb-2 kernel. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:33:02 +01:00
ARM: ftrace: enable function graph tracer Add the options to enable the function graph tracer on ARM. Function graph tracer support requires frame pointers, so exclude Thumb-2 and also make sure FRAME_POINTER gets enabled when FUNCTION_GRAPH_TRACER is used, since FUNCTION_TRACER doesn't "select FRAME_POINTER" when ARM_UNWIND is used. Therefore, with GCC 4.4.0+, you get plain function tracing without frame pointers, but you'll need them if you want function graph tracing. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rabin Vincent <rabin@rab.in>
2010-11-06 23:03:53 +05:30
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:56:34 +01:00
ARM: Ensure experimental options are so marked It is kernel-wide policy that options depending on EXPERIMENTAL should also have '(EXPERIMENTAL)' in their option text, and options with '(EXPERIMENTAL)' depend on EXPERIMENTAL. Ensure that all ARM options comply with this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-05 23:06:22 +00:00
arch/arm: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16 18:53:14 -08:00
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:56:34 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: 6314/1: ftrace: allow build without frame pointers on ARM With a new enough GCC, ARM function tracing can be supported without the need for frame pointers. This is essential for Thumb-2 support, since frame pointers aren't available then. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 19:32:37 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 19:04:44 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] Fix typo in arch/arm/Kconfig.debug It's called printch, not printchar Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-09 15:57:17 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 19:04:44 +01:00
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 18:58:51 +01:00
ARM: Alpine: early-debug print support Alpine platform includes UART8250 that can be used for early prints. Signed-off-by: Saeed Bishara <saeed@annapurnalabs.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-12 13:53:04 +02:00
ARM: add lolevel debug support for asm9260 Since there is no public documentation, this patch also provide register offsets for different UART units on this SoC. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-24 12:08:28 +01:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: at91: debug: use DEBUG_UART_PHYS Instead of having to add a new configuration option each time support for new SoC is added, use CONFIG_DEBUG_UART_PHYS. For now, CONFIG_DEBUG_UART_VIRT is automatically computed. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-08-08 12:11:11 +02:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-02 01:43:31 +08:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: at91: introduce basic SAMA5D4 support Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-09-15 18:15:54 +02:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: at91/soc: add basic support for new sama5d2 SoC Add Kconfig entries, header file changes and addition to the documentation. The early debug infrastructure is also added for easy development. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-30 19:12:12 +02:00
ARM: at91: debug: add samv7x support Add support for low level debugging on Atmel samv7x. Signed-off-by: Szemző András <sza@esh.hu> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31 03:06:24 +02:00
ARM: bcm2835: convert to multi-platform This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels. This change: * Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it into the relevant menu. * Moves bcm2835's Kconfig into its own directory, as seems typical for multi-platform conversions. * Removes bcm2835_soc.h, and moves the content to the files where it was used; just one usage per define. * Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-03-11 22:40:18 -06:00
ARM: bcm2835: Add Kconfig support for bcm2836 This should be a complete port of bcm2835 functionality to bcm2836 (Raspberry Pi 2). Signed-off-by: Eric Anholt <eric@anholt.net>
2015-02-24 15:07:55 +00:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: bcm2835: convert to multi-platform This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels. This change: * Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it into the relevant menu. * Moves bcm2835's Kconfig into its own directory, as seems typical for multi-platform conversions. * Removes bcm2835_soc.h, and moves the content to the files where it was used; just one usage per define. * Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-03-11 22:40:18 -06:00
ARM: BCM5301X: add early debugging support This adds support for early debugging of BCM5301X SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 00:01:44 +01:00
ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs Northstar Plus SoCs (ARCH_BCM_NSP) have the exact same UART location and properties like the register shift of 0, so make it usable. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-30 17:10:10 -07:00
ARM: BCM5301X: fix early serial console This device actually has a 8250 serial with a shift of 0. Tested this on a BCM4708. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-14 21:43:40 +02:00
ARM: BCM5301X: add early debugging support This adds support for early debugging of BCM5301X SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 00:01:44 +01:00
ARM: debug: Add Hurricane 2 UART2 debug addresses Broadcom Hurricane 2 SoCs typically use their secondary UART for debug/console, provide a known good location for that. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-28 16:14:59 -07:00
ARM: 7932/1: bcm: Add DEBUG_LL console support This patch adds low level debug uart support to Broadcom mobile based SOCs. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Tested-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-23 09:00:01 +01:00
ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE Low-level debugging using the Broadcom Kona UART only makes sense on the ARCH_BCM_MOBILE platform and would otherwise prevent ARCH_BCM_63XX from picking up the right UART implementation by default. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-03-06 09:45:55 -08:00
ARM: 7932/1: bcm: Add DEBUG_LL console support This patch adds low level debug uart support to Broadcom mobile based SOCs. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Tested-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-23 09:00:01 +01:00
ARM: debug-ll: fix BCM63xx entry for multiplatform During my randconfig build testing, I found that a kernel with DEBUG_AT91_UART and ARCH_BCM_63XX fails to build: arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror] It turns out that the DEBUG_UART_BCM63XX option is enabled whenever the ARCH_BCM_63XX is, and that breaks multiplatform kernels because we then end up using the UART address from BCM63XX rather than the one we actually configured (if any). This changes the BCM63XX options to only have one Kconfig option, and only enable that if the user explicitly turns it on. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support") Cc: stable@vger.kernel.org
2016-01-18 10:45:00 +01:00
ARM: BCM63XX: add low-level UART debug support Broadcom BCM63xx DSL SoCs have a different UART implementation for which we need specially crafted low-level debug assembly code to support. Add support for this using the standard definitions provided in include/linux/serial_bcm63xx.h (shared with their MIPS counterparts). Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-01-08 09:19:50 -08:00
ARM: add Marvell Berlin UART0 lowlevel debug This adds UART0 as found on Marvell 88DE3xxx SoCs, e.g. Armada 1500 to the list of possible lowlevel debug options. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-09-09 14:10:54 +02:00
ARM: brcmstb: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk on brcmstb machines. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-08-13 15:50:02 -07:00
ARM: brcmstb: Add earlyprintk support using run-time checks The SUN_TOP_CTRL_FAMILY_ID register is at a fixed absolute address for all of our supported chips, so utilize its value to determine what the UARTA base address should be based on the value we read. Since the code is called both during decompressor when the MMU is off, and after the MMU has been turned on in the kernel, and we want to do the lookup only once, we use the same technique as tegra.S and have a shared storage location between the decompressor and the kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-28 12:18:51 -07:00
ARM: brcmstb: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk on brcmstb machines. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-08-13 15:50:02 -07:00
ARM: 7096/1: debug: Add UART1 config choices ARM patch 7072/1 (debug: use kconfig choice for selecting DEBUG_LL UART) didn't notice that the Kconfigs relied on being unselected to configure a different serial port. Since there is no NONE option in a choice menu, explicitly add the other option so that both serial ports can be selected. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-22 20:28:35 +01:00
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 18:58:51 +01:00
ARM: cns3xxx: move debug_ll code to include/debug/ This is needed in order to keep debug_ll functionality on cns3xxx working when we enable ARCH_MULTIPLATFORM. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14 16:02:59 +01:00
CNS3xxx: Fix debug UART. UARTs on CNS3xxx are 8250-compatible, not AMBA. The base address for UART0 is 0x78000000 (physical) and 0xfb002000 (virtual). Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-16 12:35:10 +02:00
ARM: cns3xxx: move debug_ll code to include/debug/ This is needed in order to keep debug_ll functionality on cns3xxx working when we enable ARCH_MULTIPLATFORM. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14 16:02:59 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: digicolor: add low level debug support Use the USART peripheral as UART for low level debug. Only the UA0 port is currently supported. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-14 10:40:31 +02:00
ARM: debug-ll: rework ep93xx handling This makes ep93xx debug-ll handling more consistent with the other platforms, by adding a separate Kconfig symbol for it that in turn selects the standard DEBUG_UART_PL01X symbol. We still have to pick a physical address even if DEBUG_LL is disabled here, because the EP93xx uncompress output code uses CONFIG_DEBUG_UART_PHYS. If we ever move to multiplatform support, this can go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 16:19:22 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: debug-ll: rework footbridge handling Footbridge has two debug ports that are handled a bit differently: The 8250 port uses the normal debug/8250.S implementation that is shared with a lot of other platforms, but it relies on the DEBUG_UART_8250 option to be turned on automatically instead of being selected by DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing this to use a 'select' and change the dependency to the debug symbol rather than the platform symbol for consistency. The DC21285 UART has a separate top-level option, and relies on the traditional include/mach/debug-macro.S method. With the s3c64xx multiplatform series queued up for 4.5, it is now the last one that does this, so by moving this file to include/debug/dc21285.S, we can get all platforms to do things the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:27:53 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: debug-ll: rework gemini handling Gemini can not yet be configured in a multiplatform kernel, but if we ever get there, enabling one of the gemini platforms while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the gemini default addresses and the flow control settings only if we have also picked the respective Kconfig symbols introduced here. While we're at it, this also reorders the virtual address as it should be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
2015-12-03 17:54:05 +01:00
ARM: 7826/1: debug: support debug ll on hisilicon soc Support UART0 debug ll on Hisilicon Hi3620 SoC & Hi3716 SoC. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-24 06:58:39 +01:00
ARM: add Highbank core platform support This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-06-07 10:02:55 -05:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: add Highbank core platform support This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-06-07 10:02:55 -05:00
ARM: debug: add HiP01 debug uart Add the support of Hisilicon HiP01 debug uart. The uart of hip01 is 8250 compatible. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-24 03:09:56 +00:00
ARM: debug: add HiP04 debug uart Add the support of Hisilicon HiP04 debug uart. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2013-12-20 15:01:41 +08:00
ARM: debug: fix alphanumerical order on debug uarts HIP04 was added out of order, but so was the previous HISI debug uart support as well. Minor reshuffling of order. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-23 22:21:54 -07:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: add Highbank core platform support This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-06-07 10:02:55 -05:00
ARM: debug: fix alphanumerical order on debug uarts HIP04 was added out of order, but so was the previous HISI debug uart support as well. Minor reshuffling of order. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-23 22:21:54 -07:00
ARM: add Highbank core platform support This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-06-07 10:02:55 -05:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: add debug uart support for IMX50 SoC Add appropriate UART address definitions and support defines for using the UARTs of the Freescale IMX50 SoC as debug ports. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-29 15:15:51 +10:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 10:40:55 -02:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 10:40:55 -02:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
ARM: imx: add initial imx6dl support The i.MX6 DualLite/Solo is another i.MX6 family SoC, which is highly compatible with i.MX6 Quad/Dual. And that's why we choose to support it using imx6q code with cpu_is_imx6dl() check when necessary. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 22:13:32 +08:00
ARM: imx6: Add UART2 for low-level debug To be able to enable early debugging on boards using the UART2 for the console, add the option for early debugging on UART2. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-04-27 10:15:45 +02:00
ARM: imx: add initial imx6dl support The i.MX6 DualLite/Solo is another i.MX6 family SoC, which is highly compatible with i.MX6 Quad/Dual. And that's why we choose to support it using imx6q code with cpu_is_imx6dl() check when necessary. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 22:13:32 +08:00
arm/imx6q: add core definitions and low-level debug uart It adds the core definitions and low-level debug uart support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-02 15:09:11 +08:00
ARM: imx: enable low-level debug support for imx6sl Enable low-level debug support for i.MX6 SoloLite by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-03 11:21:03 +08:00
ARM: imx: add low-level debug support for imx6sx Enable low-level debug support for i.MX6 SoloX by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-11 21:53:48 +08:00
ARM: imx: add low-level debug support for i.mx6ul Enable low-level debug support for i.MX6UL by adding the debug port definitions for the SoC. Singed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-10 02:09:47 +08:00
ARM: imx7d: add low level debug uart support Add low level uart debug support for imx7d Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-06 23:16:07 +08:00
ARM: debug-ll: rework integrator/versatile handling Enabling one of the integrator platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the integrator default addresses only if we have also picked the respective Kconfig symbols introduced here. Versatile is not yet part of multiplatform, but hopefully soon will be, so we do the same change for versatile as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: keystone: Add minimal TI Keystone platform support Texas Instruments Keystone family of multi-core devices are based on ARM Cortex A15. Patch adds basic definitions for a new Keystone sub-architecture in ARM. The TCI66xxK2H Communications Infrastructure Keystone SoCs are member of the C66x family based on TI's new KeyStone 2 multi-core SoC Architecture designed specifically for high performance wireless and networking infrastructure applications. The SOCs contains many subsystems like Cortex A15 ARM CorePacs, C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers and queue based communication systems. Cc: Arnd Bergmann <arnd@arndb.de> Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-06-10 11:27:13 -04:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: keystone: Add minimal TI Keystone platform support Texas Instruments Keystone family of multi-core devices are based on ARM Cortex A15. Patch adds basic definitions for a new Keystone sub-architecture in ARM. The TCI66xxK2H Communications Infrastructure Keystone SoCs are member of the C66x family based on TI's new KeyStone 2 multi-core SoC Architecture designed specifically for high performance wireless and networking infrastructure applications. The SOCs contains many subsystems like Cortex A15 ARM CorePacs, C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers and queue based communication systems. Cc: Arnd Bergmann <arnd@arndb.de> Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-06-10 11:27:13 -04:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: keystone: Add minimal TI Keystone platform support Texas Instruments Keystone family of multi-core devices are based on ARM Cortex A15. Patch adds basic definitions for a new Keystone sub-architecture in ARM. The TCI66xxK2H Communications Infrastructure Keystone SoCs are member of the C66x family based on TI's new KeyStone 2 multi-core SoC Architecture designed specifically for high performance wireless and networking infrastructure applications. The SOCs contains many subsystems like Cortex A15 ARM CorePacs, C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers and queue based communication systems. Cc: Arnd Bergmann <arnd@arndb.de> Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-06-10 11:27:13 -04:00
ARM: 8270/1: ks8695: Migrate debug_ll macros to shared directory As part of the migration a couple of uart definitions have been copied from of the platform specific header files. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:33:36 +01:00
ARM: lpc18xx: define low-level debug symbol for LPC18xx/43xx Using a dedicated symbol for low-level debugging instead of the arch symbol will make this platform play nice when enabled on a kernel that supports multiple platforms. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 20:55:03 +02:00
ARM: debug-ll: rework lpc32xx handling LPC32xx can not yet be configured in a multiplatform kernel, but if we ever get there, enabling one of the LPC32xx platforms while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the LPC32xx default addresses only if we have also picked the respective Kconfig symbols introduced here. While we're at it, this also reorders the virtual address as it should be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com>
2015-12-03 17:54:05 +01:00
ARM: meson: debug: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk for MesonX SoCs on UARTAO. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-09 21:38:00 +02:00
ARM: mmp: implement DEBUG_LL port choice DEBUG_LL port must be choiced in arch-mmp. DEBUG_LL port should be UART2 in TTC DKB. And it should be UART3 in brownstone. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-10 23:49:41 +08:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: mmp: implement DEBUG_LL port choice DEBUG_LL port must be choiced in arch-mmp. DEBUG_LL port should be UART2 in TTC DKB. And it should be UART3 in brownstone. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-10 23:49:41 +08:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: mmp: implement DEBUG_LL port choice DEBUG_LL port must be choiced in arch-mmp. DEBUG_LL port should be UART2 in TTC DKB. And it should be UART3 in brownstone. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-10 23:49:41 +08:00
ARM: mvebu: Rename DEBUG_LL to indicate UART index The mvebu SoCs actually have more UARTs than just the one exposed in DEBUG_LL yet. In order to differentiate them, Add the index in the configuration options and their help. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-08 18:38:03 +01:00
ARM: mvebu: move debug macros to include/debug Move mvebu debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-02 14:41:34 -05:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: mvebu: move debug macros to include/debug Move mvebu debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-02 14:41:34 -05:00
ARM: mvebu: Rename DEBUG_LL to indicate UART index The mvebu SoCs actually have more UARTs than just the one exposed in DEBUG_LL yet. In order to differentiate them, Add the index in the configuration options and their help. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-08 18:38:03 +01:00
ARM: mvebu: move debug macros to include/debug Move mvebu debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-02 14:41:34 -05:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: mvebu: Rename DEBUG_LL to indicate UART index The mvebu SoCs actually have more UARTs than just the one exposed in DEBUG_LL yet. In order to differentiate them, Add the index in the configuration options and their help. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-08 18:38:03 +01:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: mvebu: Add UART1 as DEBUG_LL possible target Some mvebu boards have the UART1 more easily accessible than the other UARTs found on the system. Add a debug_ll option for this case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-08 18:38:04 +01:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: debug-ll: reorder Kconfig alphanumerically The file has gotten a little out of sync, as platforms got added in the wrong place, or have been renamed. This moves the options around, but should not change any functionality. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:16:45 +01:00
ARM: imx: add low-level debug for vybrid Add low-level debug support for vybrid, so that earlyprintk can be enabled for debugging early boot issue. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-12 17:22:17 +08:00
ARM: debug-ll: reorder Kconfig alphanumerically The file has gotten a little out of sync, as platforms got added in the wrong place, or have been renamed. This moves the options around, but should not change any functionality. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:16:45 +01:00
ARM: imx: add low-level debug for vybrid Add low-level debug support for vybrid, so that earlyprintk can be enabled for debugging early boot issue. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-12 17:22:17 +08:00
ARM: 8272/1: netx: Migrate DEBUG_LL macros to shared directory As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT which default to UART1 but allow a user to configure UART2 or UART3. We also introduce symbolic names for the registers and flags. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:34:03 +01:00
ARM: nomadik: move debugmacro to debug includes This moves the Nomadik debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-27 22:39:57 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: nomadik: move debugmacro to debug includes This moves the Nomadik debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-27 22:39:57 +01:00
arm: Add Initial TI-Nspire support This patch adds support for the TI-Nspire platform. Changes between v1 and v2: * Added GENERIC_IRQ_CHIP to platform Kconfig Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-11 18:40:17 +10:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
arm: Add Initial TI-Nspire support This patch adds support for the TI-Nspire platform. Changes between v1 and v2: * Added GENERIC_IRQ_CHIP to platform Kconfig Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-11 18:40:17 +10:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
arm: Add Initial TI-Nspire support This patch adds support for the TI-Nspire platform. Changes between v1 and v2: * Added GENERIC_IRQ_CHIP to platform Kconfig Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-11 18:40:17 +10:00
ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S The omap1's debug-macro.S is similar to the generic 8250 code. Compared to the 8520 code the omap1 macro automatically determines what UART to use based on breadcrumbs left by the bootloader and automatically copes with the eccentric register layout on OMAP7XX. This patch drops both these features and relies instead on the generic 8250 macros: 1. Dropping support for the bootloader breadcrumbs is identical to the way the migration was handled for OMAP2 (see 808b7e07464d...). 2. Support for OMAP7XX still exists but it must be configured by hand (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-omap@vger.kernel.org Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:33:50 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:13 -07:00
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:13 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:13 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for omap3/4/5 We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14 00:31:13 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for omap3/4/5 We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14 00:31:13 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for omap3/4/5 We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14 00:31:13 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for omap3/4/5 We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14 00:31:13 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S The omap1's debug-macro.S is similar to the generic 8250 code. Compared to the 8520 code the omap1 macro automatically determines what UART to use based on breadcrumbs left by the bootloader and automatically copes with the eccentric register layout on OMAP7XX. This patch drops both these features and relies instead on the generic 8250 macros: 1. Dropping support for the bootloader breadcrumbs is identical to the way the migration was handled for OMAP2 (see 808b7e07464d...). 2. Support for OMAP7XX still exists but it must be configured by hand (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-omap@vger.kernel.org Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:33:50 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for ti81xx We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:14 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for ti81xx We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:14 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for ti81xx We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:14 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: Use generic 8250 debug_ll for am3517 and am335x We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:14 -07:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
ARM: picoxcell: move debug macros to include/debug Move picoxcell debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jamie Iles <jamie@jamieiles.com>
2012-09-06 14:14:46 -05:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: picoxcell: move debug macros to include/debug Move picoxcell debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jamie Iles <jamie@jamieiles.com>
2012-09-06 14:14:46 -05:00
ARM: pxa: move debug uart code Move debug uart code from mach-pxa/mach-mmp to debug directory. Since they are similar, merge them together. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Eric Mico <eric.y.miao@gmail.com>
2013-04-10 11:17:04 +08:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: pxa: move debug uart code Move debug uart code from mach-pxa/mach-mmp to debug directory. Since they are similar, merge them together. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Eric Mico <eric.y.miao@gmail.com>
2013-04-10 11:17:04 +08:00
ARM: debug-ll: reorder Kconfig alphanumerically The file has gotten a little out of sync, as platforms got added in the wrong place, or have been renamed. This moves the options around, but should not change any functionality. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:16:45 +01:00
ARM: debug: qcom: add UART addresses to Kconfig help for IPQ4019 Add information about the IPQ4019 debug UART physical and virtual addresses in the DEBUG_QCOM_UARTDM Kconfig help section. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28 01:11:40 +02:00
ARM: debug-ll: reorder Kconfig alphanumerically The file has gotten a little out of sync, as platforms got added in the wrong place, or have been renamed. This moves the options around, but should not change any functionality. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:16:45 +01:00
ARM: realview: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:30:28 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: realview: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:30:28 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: realview: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:30:28 +01:00
ARM: debug: add low level debug uart for rv1108 RK1108 UARTs are Synopsis DesignWare 8250 compatible. Only with different register addresses. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com> [rk1108->rv1108 rename] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-14 20:12:35 +08:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll options The debug uart settings from the DEBUG_RK3X_UART options are usable on all Rockchip SoCs from the rk30xx and rk31xx series but not on the new rk3288 SoCs. Thus clarify their use to prevent confusion. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-16 17:08:14 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll options The debug uart settings from the DEBUG_RK3X_UART options are usable on all Rockchip SoCs from the rk30xx and rk31xx series but not on the new rk3288 SoCs. Thus clarify their use to prevent confusion. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-16 17:08:14 +02:00
arm: add debug uarts for rockchip rk29xx and rk3xxx series Uarts on all recent Rockchip SoCs are Synopsis DesignWare 8250 types. Only their addresses vary very much. This patch adds the necessary definitions to use any of the uart ports for early debug purposes. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-05-28 22:13:52 +02:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll options The debug uart settings from the DEBUG_RK3X_UART options are usable on all Rockchip SoCs from the rk30xx and rk31xx series but not on the new rk3288 SoCs. Thus clarify their use to prevent confusion. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-16 17:08:14 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll options The debug uart settings from the DEBUG_RK3X_UART options are usable on all Rockchip SoCs from the rk30xx and rk31xx series but not on the new rk3288 SoCs. Thus clarify their use to prevent confusion. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-16 17:08:14 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
arm: add debug uarts for rockchip rk29xx and rk3xxx series Uarts on all recent Rockchip SoCs are Synopsis DesignWare 8250 types. Only their addresses vary very much. This patch adds the necessary definitions to use any of the uart ports for early debug purposes. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-05-28 22:13:52 +02:00
ARM: rockchip: add debug uart used by rk3288 The uarts on rk3288 are still compatible with the dw_8250, but located at a different position and need DEBUG_UART_8250_WORD enabled. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-06-28 13:31:17 +02:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug-ll: Add support for r8a7743 Enable low-level debugging support for RZ/G1M (r8a7743). RZ/G1M uses SCIF0 for the debug console, like most of the R-Car Gen2 SoCs. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-08 11:08:14 +01:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug-ll: Add support for r8a7743 Enable low-level debugging support for RZ/G1M (r8a7743). RZ/G1M uses SCIF0 for the debug console, like most of the R-Car Gen2 SoCs. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-08 11:08:14 +01:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug-ll: Add support for r8a7745 Enable low-level debugging support for RZ/G1E (r8a7745). RZ/G1E uses SCIF4 for the debug console. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-16 11:20:10 +01:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: shmobile: sh7372: Remove Legacy C SoC code Remove support for the legacy Cortex-A8 based sh7372 SoC. The Linux kernel still lacks DT bindings for the sh7372 INTC interrupt controller so DT multiplatform support is not possibile. Also, the sh7372 SoC never went into mass production anyway so to aid migration to DT multiplatform simply get rid of sh7372 support. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-26 15:19:20 +09:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: shmobile: sh7372: Remove Legacy C SoC code Remove support for the legacy Cortex-A8 based sh7372 SoC. The Linux kernel still lacks DT bindings for the sh7372 INTC interrupt controller so DT multiplatform support is not possibile. Also, the sh7372 SoC never went into mass production anyway so to aid migration to DT multiplatform simply get rid of sh7372 support. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-26 15:19:20 +09:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: S5PV210: move debug-macro.S into the common space Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-03 14:39:41 +02:00
ARM: debug: Update Samsung UART config options In a multiplatform config, the low level debug option shows several UART port entries. Improve the user visible string so that it becomes clear to the user about Samsung UART ports. While at it also remove some lines from the help text that are no longer applicable across all Samsung platforms. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-05 06:27:45 +09:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: S5PV210: move debug-macro.S into the common space Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-03 14:39:41 +02:00
ARM: debug: Update Samsung UART config options In a multiplatform config, the low level debug option shows several UART port entries. Improve the user visible string so that it becomes clear to the user about Samsung UART ports. While at it also remove some lines from the help text that are no longer applicable across all Samsung platforms. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-05 06:27:45 +09:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: S5PV210: move debug-macro.S into the common space Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-03 14:39:41 +02:00
ARM: debug: Update Samsung UART config options In a multiplatform config, the low level debug option shows several UART port entries. Improve the user visible string so that it becomes clear to the user about Samsung UART ports. While at it also remove some lines from the help text that are no longer applicable across all Samsung platforms. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-05 06:27:45 +09:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: EXYNOS: add UART3 to DEBUG_LL ports Add support for using UART3 for DEBUG_LL on exynos. [dianders: added depend on ARCH_EXYNOS.] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 14:24:04 +09:00
ARM: S5PV210: move debug-macro.S into the common space Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-03 14:39:41 +02:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: S5PV210: move debug-macro.S into the common space Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-03 14:39:41 +02:00
ARM: debug: Update Samsung UART config options In a multiplatform config, the low level debug option shows several UART port entries. Improve the user visible string so that it becomes clear to the user about Samsung UART ports. While at it also remove some lines from the help text that are no longer applicable across all Samsung platforms. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-05 06:27:45 +09:00
ARM: EXYNOS: add UART3 to DEBUG_LL ports Add support for using UART3 for DEBUG_LL on exynos. [dianders: added depend on ARCH_EXYNOS.] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 14:24:04 +09:00
ARM: S3C24XX: trim down debug uart handling Using the lowlevel debug uart is a corner case - even more so in a multiplatform environment. So it seems reasonable to simply let the developer set the appropriate uart type for the debugged SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: debug: move StrongARM debug include to arch/arm/include/debug StrongARM debug-macro.S is quite standalone thing, depending only on register mappings. Move it to proper place and add Kconfig entry. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-06 10:20:23 +03:00
ARM: socfpga: Add support for UART1 debug uart for earlyprintk Add support for hardware uart1 for earlyprintk support on Arria10 devkit. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-09 15:48:31 -05:00
ARM: socfpga: move debug macros to include/debug Move socfpga debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dinh Nguyen <dinguyen@altera.com>
2012-09-06 14:11:28 -05:00
ARM: socfpga: Add support for UART1 debug uart for earlyprintk Add support for hardware uart1 for earlyprintk support on Arria10 devkit. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-09 15:48:31 -05:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: socfpga: move debug macros to include/debug Move socfpga debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dinh Nguyen <dinguyen@altera.com>
2012-09-06 14:11:28 -05:00
ARM: socfpga: Add support for UART1 debug uart for earlyprintk Add support for hardware uart1 for earlyprintk support on Arria10 devkit. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-09 15:48:31 -05:00
ARM: socfpga: move debug macros to include/debug Move socfpga debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dinh Nguyen <dinguyen@altera.com>
2012-09-06 14:11:28 -05:00
ARM: sunxi: Add debug uart used by sun9i (Allwinner A80) The uarts on sun9i are still compatible with the dw_8250, but are located at different addresses. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-09-24 22:48:56 +08:00
ARM: sunxi: Add earlyprintk support for UART0 (sun4i) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-19 12:09:41 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: sunxi: Add earlyprintk support for UART0 (sun4i) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-19 12:09:41 +01:00
ARM: sunxi: Add earlyprintk support Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de>
2012-11-08 12:40:49 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: sunxi: Add earlyprintk support Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de>
2012-11-08 12:40:49 +01:00
ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i) sun6i/sun8i have a UART in the RTC block group, which can be used as an early console. This is most useful on sun8i as UART0 is muxed with MMC0, which is not available if we boot from MMC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-06-20 22:52:51 +08:00
ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco prima2 and marco has different memory base, the old code will fail if we enable DEBUG_LL in marco. this patch adds two debuf port, while debugging, we select one of PRIMA2 and MARCO debug ports, in the products, we disable DEBUG_LL. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-12-20 19:45:25 +08:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco prima2 and marco has different memory base, the old code will fail if we enable DEBUG_LL in marco. this patch adds two debuf port, while debugging, we select one of PRIMA2 and MARCO debug ports, in the products, we disable DEBUG_LL. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-12-20 19:45:25 +08:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco prima2 and marco has different memory base, the old code will fail if we enable DEBUG_LL in marco. this patch adds two debuf port, while debugging, we select one of PRIMA2 and MARCO debug ports, in the products, we disable DEBUG_LL. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-12-20 19:45:25 +08:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco prima2 and marco has different memory base, the old code will fail if we enable DEBUG_LL in marco. this patch adds two debuf port, while debugging, we select one of PRIMA2 and MARCO debug ports, in the products, we disable DEBUG_LL. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-12-20 19:45:25 +08:00
ARM: debug-ll: rework SPEAr handling Enabling one of the SPEAr platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the SPEAr default addresses only if we have also picked the respective Kconfig symbols introduced here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: move DEBUG_STI_UART into alphabetical order This was accidentally added in the wrong place, messing up the ordering of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05 16:08:44 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: move DEBUG_STI_UART into alphabetical order This was accidentally added in the wrong place, messing up the ordering of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05 16:08:44 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: move DEBUG_STI_UART into alphabetical order This was accidentally added in the wrong place, messing up the ordering of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05 16:08:44 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: tegra: move debug-macro.S to include/debug Move Tegra's debug-macro.S over to the common debug macro directory. Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that all related options are selected in the same place. Tegra's uncompress.h is left in mach-tegra/include/mach; it will be removed whenever Tegra is converted to multi-platform. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-25 15:54:56 -06:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: tegra: move debug-macro.S to include/debug Move Tegra's debug-macro.S over to the common debug macro directory. Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that all related options are selected in the same place. Tegra's uncompress.h is left in mach-tegra/include/mach; it will be removed whenever Tegra is converted to multi-platform. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-25 15:54:56 -06:00
ARM: u300: move debugmacro to debug includes This moves the U300 debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-02 16:34:19 +02:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: u300: move debugmacro to debug includes This moves the U300 debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-02 16:34:19 +02:00
ARM: ux500: move debugmacro to debug includes This moves the Ux500 debug macro to the debug headers to make way for multiplatform support. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-19 11:01:36 +01:00
ARM: debug-ll: rework integrator/versatile handling Enabling one of the integrator platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the integrator default addresses only if we have also picked the respective Kconfig symbols introduced here. Versatile is not yet part of multiplatform, but hopefully soon will be, so we do the same change for versatile as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: mediatek: Add earlyprintk support for mt8127 & mt8135 Enable low-level debug for Mediatek mt8127 & mt8135 SoC. Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-04 15:30:54 +08:00
ARM: debug-ll: rework integrator/versatile handling Enabling one of the integrator platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the integrator default addresses only if we have also picked the respective Kconfig symbols introduced here. Versatile is not yet part of multiplatform, but hopefully soon will be, so we do the same change for versatile as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: mediatek: Add earlyprintk support for mt8127 & mt8135 Enable low-level debug for Mediatek mt8127 & mt8135 SoC. Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-04 15:30:54 +08:00
ARM: vexpress: Config option for early printk console Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-11 17:07:25 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: vexpress: Config option for early printk console Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-11 17:07:25 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: vexpress: Config option for early printk console Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-11 17:07:25 +01:00
ARM: vexpress: Add Cortex-R Series UART, selectable via DEBUG_LL The Cortex-R series processors on Versatile Express have a different memory map to the RS1 and CA9X4 tiles. Most of the platform difference can be expressed in device-trees, but the UART definitions for LL_DEBUG cannot. This patch defines the UART location for R-Series processors on versatile-express, allowing low-level debug and output from the decompressor. These definitions are selectable via Kconfig Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> CC: Pawel Moll <pawel.moll@arm.com>
2012-08-30 13:46:44 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: vexpress: Add Cortex-R Series UART, selectable via DEBUG_LL The Cortex-R series processors on Versatile Express have a different memory map to the RS1 and CA9X4 tiles. Most of the platform difference can be expressed in device-trees, but the UART definitions for LL_DEBUG cannot. This patch defines the UART location for R-Series processors on versatile-express, allowing low-level debug and output from the decompressor. These definitions are selectable via Kconfig Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> CC: Pawel Moll <pawel.moll@arm.com>
2012-08-30 13:46:44 +01:00
ARM: debug-ll: reorder Kconfig alphanumerically The file has gotten a little out of sync, as platforms got added in the wrong place, or have been renamed. This moves the options around, but should not change any functionality. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:16:45 +01:00
arm: vt8500: Convert debug-macro.S to be multiplatform friendly This patch moves debug-macro.S from arm/mach-vt8500/include/mach to arm/include/debug/vt8500.S to provide multiplatform support. Minor style changes in code for readability. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2012-12-28 12:09:18 +13:00
ARM: debug-ll: reorder Kconfig alphanumerically The file has gotten a little out of sync, as platforms got added in the wrong place, or have been renamed. This moves the options around, but should not change any functionality. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:16:45 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-06 21:24:32 +01:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-06 21:24:32 +01:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-06 21:24:32 +01:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: 7850/1: DEBUG_LL on efm32 SoCs This implements output of debug messages on efm32 SoCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-08 16:44:17 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 18:58:51 +01:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: S3C24XX: trim down debug uart handling Using the lowlevel debug uart is a corner case - even more so in a multiplatform environment. So it seems reasonable to simply let the developer set the appropriate uart type for the debugged SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: S3C24XX: trim down debug uart handling Using the lowlevel debug uart is a corner case - even more so in a multiplatform environment. So it seems reasonable to simply let the developer set the appropriate uart type for the debugged SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: S5PV210: move debug-macro.S into the common space Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-03 14:39:41 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs Extend imx6q DEBUG_LL uart port selection support to cover all i.MX SoCs. The 'range' of the Kconfig option gets dropped, as users looking at the option must know the uart number on his board. The bottom line is that the build system will report an error if an invalid port number is picked for given SoC. The header arch/arm/include/debug/imx-uart.h is created to accommodate all the uart base addresses. And the header will also be used for other low-level debug facility later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 19:03:53 +08:00
ARM: imx: add debug uart support for IMX50 SoC Add appropriate UART address definitions and support defines for using the UARTs of the Freescale IMX50 SoC as debug ports. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-29 15:15:51 +10:00
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs Extend imx6q DEBUG_LL uart port selection support to cover all i.MX SoCs. The 'range' of the Kconfig option gets dropped, as users looking at the option must know the uart number on his board. The bottom line is that the build system will report an error if an invalid port number is picked for given SoC. The header arch/arm/include/debug/imx-uart.h is created to accommodate all the uart base addresses. And the header will also be used for other low-level debug facility later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 19:03:53 +08:00
ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" Commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) had a typo that DEBUG_IMX50_IMX53_UART should be DEBUG_IMX53_UART. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-11 14:16:00 +01:00
ARM: imx: enable low-level debug support for imx6sl Enable low-level debug support for i.MX6 SoloLite by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-03 11:21:03 +08:00
ARM: imx: add low-level debug support for imx6sx Enable low-level debug support for i.MX6 SoloX by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-11 21:53:48 +08:00
ARM: imx7d: add low level debug uart support Add low level uart debug support for imx7d Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-06 23:16:07 +08:00
ARM: imx: add low-level debug support for i.mx6ul Enable low-level debug support for i.MX6UL by adding the debug port definitions for the SoC. Singed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-10 02:09:47 +08:00
ARM: imx7d: add low level debug uart support Add low level uart debug support for imx7d Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-06 23:16:07 +08:00
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
ARM: imx: add dependency check for DEBUG_IMX_UART_PORT While adding i.MX DEBUG_LL selection, commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) leaves Kconfig symbol DEBUG_IMX_UART_PORT there without any dependency check. This results in that everyone gets the symbol in their config, which is someting undesirable. Add "depends on ARCH_MXC" for the symbol to prevent that. Reported-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-13 10:52:49 +08:00
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
ARM: vf610: add UART choice for low-level debug Add choice for low-level debug UART. Similar to i.MX6, there is a numeric configuration, valid choices are 0 to 3. Note that the kernel assumes that the boot loader initialized clock properly. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05 23:07:48 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: Add DEBUG_LL console support This patch adds low level debug uart support to sti based SOCs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 12:15:32 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: Add DEBUG_LL console support This patch adds low level debug uart support to sti based SOCs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 12:15:32 +01:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 00:03:46 -05:00
ARM: debug: move StrongARM debug include to arch/arm/include/debug StrongARM debug-macro.S is quite standalone thing, depending only on register mappings. Move it to proper place and add Kconfig entry. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-06 10:20:23 +03:00
ARM: debug: add support for Palmchip BK-310x UART Some SoCs use a Palmchip BK-310x UART which is mostly 16550 compatible but with a different register layout. While this UART has previously only been supported in MIPS based chips (Alchemy, Ralink), the ARM based SMP87xx series from Sigma Designs also uses it. This patch allows the debug console to work with this type of UART. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-05 10:49:22 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: at91: fix Kconfig.debug by adding DEBUG_AT91_UART option The DEBUG_AT91_UART Kconfig option was forgotten when moving the AT91 debug-macro.S file. Add it and use it for the at91.S compilation. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-20 11:38:02 +01:00
ARM: add lolevel debug support for asm9260 Since there is no public documentation, this patch also provide register offsets for different UART units on this SoC. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-24 12:08:28 +01:00
ARM: clps711x: Move debug include into arch/arm/include/debug/ One more step to allowing CLPS711X to participate in the multi-platform defconfig. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-19 19:26:34 +04:00
ARM: debug-ll: rework footbridge handling Footbridge has two debug ports that are handled a bit differently: The 8250 port uses the normal debug/8250.S implementation that is shared with a lot of other platforms, but it relies on the DEBUG_UART_8250 option to be turned on automatically instead of being selected by DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing this to use a 'select' and change the dependency to the debug symbol rather than the platform symbol for consistency. The DC21285 UART has a separate top-level option, and relies on the traditional include/mach/debug-macro.S method. With the s3c64xx multiplatform series queued up for 4.5, it is now the last one that does this, so by moving this file to include/debug/dc21285.S, we can get all platforms to do things the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:27:53 +01:00
ARM: meson: debug: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk for MesonX SoCs on UARTAO. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-09 21:38:00 +02:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: 7850/1: DEBUG_LL on efm32 SoCs This implements output of debug messages on efm32 SoCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-08 16:44:17 +01:00
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 00:03:46 -05:00
ARM: imx: move debug macros to include/debug Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-16 20:50:45 +08:00
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
ARM: imx: add debug uart support for IMX50 SoC Add appropriate UART address definitions and support defines for using the UARTs of the Freescale IMX50 SoC as debug ports. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-29 15:15:51 +10:00
ARM: imx: move debug macros to include/debug Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-16 20:50:45 +08:00
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 10:40:55 -02:00
ARM: imx: enable low-level debug support for imx6sl Enable low-level debug support for i.MX6 SoloLite by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-03 11:21:03 +08:00
ARM: imx: add low-level debug support for imx6sx Enable low-level debug support for i.MX6 SoloX by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-11 21:53:48 +08:00
ARM: imx7d: add low level debug uart support Add low level uart debug support for imx7d Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-06 23:16:07 +08:00
ARM: imx: add low-level debug support for i.mx6ul Enable low-level debug support for i.MX6UL by adding the debug port definitions for the SoC. Singed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-10 02:09:47 +08:00
ARM: imx7d: add low level debug uart support Add low level uart debug support for imx7d Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-06 23:16:07 +08:00
ARM: 8270/1: ks8695: Migrate debug_ll macros to shared directory As part of the migration a couple of uart definitions have been copied from of the platform specific header files. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:33:36 +01:00
ARM: Remove mach-msm and associated ARM architecture code The maintainers for mach-msm no longer have any plans to support or test the platforms supported by this architecture[1]. Most likely there aren't any active users of this code anyway, so let's delete it. [1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-13 11:09:34 -07:00
ARM: 8272/1: netx: Migrate DEBUG_LL macros to shared directory As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT which default to UART1 but allow a user to configure UART2 or UART3. We also introduce symbolic names for the registers and flags. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:34:03 +01:00
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug-ll: Add support for r8a7745 Enable low-level debugging support for RZ/G1E (r8a7745). RZ/G1E uses SCIF4 for the debug console. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-16 11:20:10 +01:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: S5PV210: move debug-macro.S into the common space Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-03 14:39:41 +02:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: sti: Add DEBUG_LL console support This patch adds low level debug uart support to sti based SOCs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 12:15:32 +01:00
ARM: arm-soc board specific changes for 3.10, part 1 These changes are all for board specific files. These used to make up a large portion of the ARM changes in the past, but as we are generalizing the support and moving to device tree probing, this has gotten significantly smaller. The only platform actually adding new code here at the moment is Renesas shmobile, as they are still busy converting their code to device tree and have not come far enough to not need it. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRhKYeAAoJEIwa5zzehBx3ez8QAKLnzjAQJzhfJezJ+g02tXS9 xIikiX1zmEb3HuF8Z/SFRWVj2Zbe+cBaDpr7JERmmOTWWUtxHbqIPFr2xUbyi0qY d1yBFEtAv+Pf6lgIGRHPejCXigInp0ew94+VMih7rOVkXdNZqLBP+Z4CEntoak+H 1+c4MvW/37VlyQUnsrQgUcC7mu9lSIVwJjYXCGJVs4cKwYYnLNH6tLINx62SOCkW cdoJV/eTvRWD6Wx8kxvNE7WJMVNuB8e7R7DKkn5SES9beWJ1tvcGtNS2KaK8rFdC Xee8SNo2RzxDQwtkPYA2iZg9Gs3vxNEiy3AX0Tsvji7a3ipQk/M13NlOa1h+tu4w 8wNZDccYOsFejlnpnDWk64eVmu2w0c58CWbRaPYOOkGJ5pTnZ9+2cO7CLTOmQWrb y2Vdly10vQR7AbnlgLlx9RuIAdAVoMGVwCO1JrnBonRriXQCq/vSEFfhKbLK4/MO FYyW+sy222f+kv1JrEdffO7rdIc/EdHRkiGSeVFQ63ETl6F+wx7zEMwb+RV2ysi3 zQQJDeMTrP9StqKaBfyOS3IF+Jbv/f4dM6oKxwlyR5kwuO+J1H6yFG3ugBSuED82 eUz1O35Q1JY593qS8XD22wMjRQt3xhwdrD0hAZnCbUiJxe1Tatf16bBloBQ8vwsY hHdiINWICRawVJLK7SZB =2cfP -----END PGP SIGNATURE----- Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board specific changes (part 1) from Olof Johansson: "These changes are all for board specific files. These used to make up a large portion of the ARM changes in the past, but as we are generalizing the support and moving to device tree probing, this has gotten significantly smaller. The only platform actually adding new code here at the moment is Renesas shmobile, as they are still busy converting their code to device tree and have not come far enough to not need it." * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: msm: USB_MSM_OTG needs USB_PHY ARM: davinci: da850 evm: fix const qualifier placement ARM: davinci: da850 board: add remoteproc support ARM: pxa: move debug uart code ARM: pxa: select PXA935 on saar & tavorevb ARM: mmp: add more compatible names in gpio driver ARM: pxa: move PXA_GPIO_TO_IRQ macro ARM: pxa: remove cpu_is_xxx in gpio driver ARM: Kirkwood: update Network Space Mini v2 description ARM: Kirkwood: DT board setup for CloudBox ARM: Kirkwood: sort board entries by ASCII-code order ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor omap2+: Remove useless Makefile line omap2+: Remove useless Makefile line ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d ARM: OMAP1: fix omap_udc registration ARM: davinci: use is IS_ENABLED macro ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig ...
2013-05-04 12:34:30 -07:00
ARM: debug: move PL01X debug include into arch/arm/include/debug/ Now that the PL01X debug include can mostly stand alone without requiring platforms to provide any macros, move it into the debug directory so it can be directly included. This allows us to get rid of a lot of debug-macros include files. The autodetect case for Versatile Express and the ux500 are left alone; these are more complicated implementations. Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:36:46 +01:00
ARM: imx: add low-level debug for vybrid Add low-level debug support for vybrid, so that earlyprintk can be enabled for debugging early boot issue. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-12 17:22:17 +08:00
arm: vt8500: Convert debug-macro.S to be multiplatform friendly This patch moves debug-macro.S from arm/mach-vt8500/include/mach to arm/include/debug/vt8500.S to provide multiplatform support. Minor style changes in code for readability. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2012-12-28 12:09:18 +13:00
ARM: zynq: make use of debug_ll_io_init() Convert low-level debugging routines to make use of debug_ll_io_init(). This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-19 10:16:01 -06:00
ARM: debug-ll: fix BCM63xx entry for multiplatform During my randconfig build testing, I found that a kernel with DEBUG_AT91_UART and ARCH_BCM_63XX fails to build: arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror] It turns out that the DEBUG_UART_BCM63XX option is enabled whenever the ARCH_BCM_63XX is, and that breaks multiplatform kernels because we then end up using the UART address from BCM63XX rather than the one we actually configured (if any). This changes the BCM63XX options to only have one Kconfig option, and only enable that if the user explicitly turns it on. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support") Cc: stable@vger.kernel.org
2016-01-18 10:45:00 +01:00
ARM: digicolor: add low level debug support Use the USART peripheral as UART for low level debug. Only the UA0 port is currently supported. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-14 10:40:31 +02:00
ARM: brcmstb: Add earlyprintk support using run-time checks The SUN_TOP_CTRL_FAMILY_ID register is at a fixed absolute address for all of our supported chips, so utilize its value to determine what the UARTA base address should be based on the value we read. Since the code is called both during decompressor when the MMU is off, and after the MMU has been turned on in the kernel, and we want to do the lookup only once, we use the same technique as tegra.S and have a shared storage location between the decompressor and the kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-28 12:18:51 -07:00
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 00:03:46 -05:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: 8274/1: Fix DEBUG_LL for multi-platform kernels (without PL01X) When building a multi_v7_defconfig kernel it is not possible to configure DEBUG_LL to use any serial device except a ARM Primecell PL01X, or more accurately and worse, it is possible to configure a different serial device but KConfig does not honour this request. In fact this also overrides the user selection for some of the single platform kernels, for example I don't think DEBUG_LL can be targeted at ICE or semihosted supervisor for ARCH_VERSATILE. This happens because DEBUG_UART_PL01X is automatically enabled by some architectures and this means user decisions made regarding the DEBUG_LL backend will be overridden. Problem is fixed by removing the automatic enabling of this option. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:34:22 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: provide 8250 debug uart flow control configuration option Move the definition out of the machine class debug-macro.S header into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 22:59:10 +01:00
ARM: debug-ll: rework footbridge handling Footbridge has two debug ports that are handled a bit differently: The 8250 port uses the normal debug/8250.S implementation that is shared with a lot of other platforms, but it relies on the DEBUG_UART_8250 option to be turned on automatically instead of being selected by DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing this to use a 'select' and change the dependency to the debug symbol rather than the platform symbol for consistency. The DC21285 UART has a separate top-level option, and relies on the traditional include/mach/debug-macro.S method. With the s3c64xx multiplatform series queued up for 4.5, it is now the last one that does this, so by moving this file to include/debug/dc21285.S, we can get all platforms to do things the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:27:53 +01:00
ARM: debug-ll: rework gemini handling Gemini can not yet be configured in a multiplatform kernel, but if we ever get there, enabling one of the gemini platforms while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the gemini default addresses and the flow control settings only if we have also picked the respective Kconfig symbols introduced here. While we're at it, this also reorders the virtual address as it should be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
2015-12-03 17:54:05 +01:00
ARM: debug-ll: rework lpc32xx handling LPC32xx can not yet be configured in a multiplatform kernel, but if we ever get there, enabling one of the LPC32xx platforms while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the LPC32xx default addresses only if we have also picked the respective Kconfig symbols introduced here. While we're at it, this also reorders the virtual address as it should be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com>
2015-12-03 17:54:05 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: 8272/1: netx: Migrate DEBUG_LL macros to shared directory As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT which default to UART1 but allow a user to configure UART2 or UART3. We also introduce symbolic names for the registers and flags. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:34:03 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i) sun6i/sun8i have a UART in the RTC block group, which can be used as an early console. This is most useful on sun8i as UART0 is muxed with MMC0, which is not available if we boot from MMC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-06-20 22:52:51 +08:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: sunxi: Add debug uart used by sun9i (Allwinner A80) The uarts on sun9i are still compatible with the dw_8250, but are located at different addresses. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-09-24 22:48:56 +08:00
ARM: zx: add low level debug support for zx296702 Use the UART0 peripheral for low level debug. Only the UART port 0 is currently supported. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 17:18:07 +08:00
CNS3xxx: Fix debug UART. UARTs on CNS3xxx are 8250-compatible, not AMBA. The base address for UART0 is 0x78000000 (physical) and 0xfb002000 (virtual). Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-16 12:35:10 +02:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug-ll: rework integrator/versatile handling Enabling one of the integrator platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the integrator default addresses only if we have also picked the respective Kconfig symbols introduced here. Versatile is not yet part of multiplatform, but hopefully soon will be, so we do the same change for versatile as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: add low level debug uart for rv1108 RK1108 UARTs are Synopsis DesignWare 8250 compatible. Only with different register addresses. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com> [rk1108->rv1108 rename] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-14 20:12:35 +08:00
ARM: mediatek: Add earlyprintk support for mt8127 & mt8135 Enable low-level debug for Mediatek mt8127 & mt8135 SoC. Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-04 15:30:54 +08:00
ARM: mediatek: Add earlyprintk support for mt6589 Enable low-level debug for Mediatek mt6589 SoC on UART0. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-18 16:58:00 +02:00
ARM: mediatek: Add earlyprintk support for mt8127 & mt8135 Enable low-level debug for Mediatek mt8127 & mt8135 SoC. Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-04 15:30:54 +08:00
ARM: debug-ll: rework integrator/versatile handling Enabling one of the integrator platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the integrator default addresses only if we have also picked the respective Kconfig symbols introduced here. Versatile is not yet part of multiplatform, but hopefully soon will be, so we do the same change for versatile as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: BCM5301X: add early debugging support This adds support for early debugging of BCM5301X SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 00:01:44 +01:00
ARM: debug: Add Hurricane 2 UART2 debug addresses Broadcom Hurricane 2 SoCs typically use their secondary UART for debug/console, provide a known good location for that. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-28 16:14:59 -07:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: add HiP01 debug uart Add the support of Hisilicon HiP01 debug uart. The uart of hip01 is 8250 compatible. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-24 03:09:56 +00:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: bcm2835: Add Kconfig support for bcm2836 This should be a complete port of bcm2835 functionality to bcm2836 (Raspberry Pi 2). Signed-off-by: Eric Anholt <eric@anholt.net>
2015-02-24 15:07:55 +00:00
ARM: 7932/1: bcm: Add DEBUG_LL console support This patch adds low level debug uart support to Broadcom mobile based SOCs. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Tested-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-23 09:00:01 +01:00
ARM: 7850/1: DEBUG_LL on efm32 SoCs This implements output of debug messages on efm32 SoCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-08 16:44:17 +01:00
ARM: at91: debug: add samv7x support Add support for low level debugging on Atmel samv7x. Signed-off-by: Szemző András <sza@esh.hu> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31 03:06:24 +02:00
ARM: lpc18xx: define low-level debug symbol for LPC18xx/43xx Using a dedicated symbol for low-level debugging instead of the arch symbol will make this platform play nice when enabled on a kernel that supports multiple platforms. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 20:55:03 +02:00
ARM: debug-ll: rework lpc32xx handling LPC32xx can not yet be configured in a multiplatform kernel, but if we ever get there, enabling one of the LPC32xx platforms while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the LPC32xx default addresses only if we have also picked the respective Kconfig symbols introduced here. While we're at it, this also reorders the virtual address as it should be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com>
2015-12-03 17:54:05 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug-ll: rework gemini handling Gemini can not yet be configured in a multiplatform kernel, but if we ever get there, enabling one of the gemini platforms while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the gemini default addresses and the flow control settings only if we have also picked the respective Kconfig symbols introduced here. While we're at it, this also reorders the virtual address as it should be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
2015-12-03 17:54:05 +01:00
ARM: debug: Use generic 8250 debug_ll for am3517 and am335x We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:14 -07:00
ARM: debug: Use generic 8250 debug_ll for ti81xx We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:14 -07:00
ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:13 -07:00
ARM: debug: Use generic 8250 debug_ll for omap3/4/5 We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14 00:31:13 -07:00
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
CNS3xxx: Fix debug UART. UARTs on CNS3xxx are 8250-compatible, not AMBA. The base address for UART0 is 0x78000000 (physical) and 0xfb002000 (virtual). Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-29 08:32:08 +02:00
ARM: debug-ll: rework footbridge handling Footbridge has two debug ports that are handled a bit differently: The 8250 port uses the normal debug/8250.S implementation that is shared with a lot of other platforms, but it relies on the DEBUG_UART_8250 option to be turned on automatically instead of being selected by DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing this to use a 'select' and change the dependency to the debug symbol rather than the platform symbol for consistency. The DC21285 UART has a separate top-level option, and relies on the traditional include/mach/debug-macro.S method. With the s3c64xx multiplatform series queued up for 4.5, it is now the last one that does this, so by moving this file to include/debug/dc21285.S, we can get all platforms to do things the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:27:53 +01:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: add lolevel debug support for asm9260 Since there is no public documentation, this patch also provide register offsets for different UART units on this SoC. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-24 12:08:28 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sorted This patch sorts the entries for DEBUG_UART_{PHYS,VIRT}. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-12 06:07:23 +01:00
ARM: debug-ll: rework ep93xx handling This makes ep93xx debug-ll handling more consistent with the other platforms, by adding a separate Kconfig symbol for it that in turn selects the standard DEBUG_UART_PL01X symbol. We still have to pick a physical address even if DEBUG_LL is disabled here, because the EP93xx uncompress output code uses CONFIG_DEBUG_UART_PHYS. If we ever move to multiplatform support, this can go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 16:19:22 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug-ll: rework SPEAr handling Enabling one of the SPEAr platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the SPEAr default addresses only if we have also picked the respective Kconfig symbols introduced here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: mvebu: Rename DEBUG_LL to indicate UART index The mvebu SoCs actually have more UARTs than just the one exposed in DEBUG_LL yet. In order to differentiate them, Add the index in the configuration options and their help. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-08 18:38:03 +01:00
ARM: meson: debug: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk for MesonX SoCs on UARTAO. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-09 21:38:00 +02:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug-ll: rework SPEAr handling Enabling one of the SPEAr platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the SPEAr default addresses only if we have also picked the respective Kconfig symbols introduced here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: debug: add HiP04 debug uart Add the support of Hisilicon HiP04 debug uart. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2013-12-20 15:01:41 +08:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug-ll: Add support for r8a7745 Enable low-level debugging support for RZ/G1E (r8a7745). RZ/G1E uses SCIF4 for the debug console. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-16 11:20:10 +01:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: mvebu: Rename DEBUG_LL to indicate UART index The mvebu SoCs actually have more UARTs than just the one exposed in DEBUG_LL yet. In order to differentiate them, Add the index in the configuration options and their help. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-08 18:38:03 +01:00
ARM: mvebu: Add UART1 as DEBUG_LL possible target Some mvebu boards have the UART1 more easily accessible than the other UARTs found on the system. Add a debug_ll option for this case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-08 18:38:04 +01:00
ARM: add Marvell Berlin UART0 lowlevel debug This adds UART0 as found on Marvell 88DE3xxx SoCs, e.g. Armada 1500 to the list of possible lowlevel debug options. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-09-09 14:10:54 +02:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: debug: Rename Hi3716 to HIX5HD2 Rename Hisilicon HI3716 to HIX5HD2 and add dependency on ARCH_HIX5HD2. HiX5HD2 is a SoC with dual Cortex A9 cores for STB market, and original Hi3xxx SoC is for mobile market. To avoid confusing the two types of SoCs and also because of different implementation (SMP, IPs integrated and earlycon config), rename Hi3716 to HIX5HD2 and add ARCH_HIX5HD2. Signed-off-by: Haifeng Yan <yanhaifeng@gmail.com> Signed-off-by: Jiancheng Xue <jchxue@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> [olof: fixed description typos] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-04-11 11:40:58 +08:00
ARM: debug: qcom: make UART address selection configuration option Separate Qualcomm low-level debugging UART to two options. DEBUG_MSM_UART is used in earlier non-multi platform arches, like MSM7X00A, QSD8X50 and MSM7X30. DEBUG_QCOM_UARTDM is used in multi-plafrom arches and have embedded data mover. Make DEBUG_UART_PHYS and DEBUG_UART_BASE user adjustable by Kconfig menu. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-14 16:47:34 +03:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: 7826/1: debug: support debug ll on hisilicon soc Support UART0 debug ll on Hisilicon Hi3620 SoC & Hi3716 SoC. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-24 06:58:39 +01:00
ARM: Alpine: early-debug print support Alpine platform includes UART8250 that can be used for early prints. Signed-off-by: Saeed Bishara <saeed@annapurnalabs.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-12 13:53:04 +02:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: rockchip: add debug uart used by rk3288 The uarts on rk3288 are still compatible with the dw_8250, but located at a different position and need DEBUG_UART_8250_WORD enabled. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-06-28 13:31:17 +02:00
ARM: socfpga: Add support for UART1 debug uart for earlyprintk Add support for hardware uart1 for earlyprintk support on Arria10 devkit. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-09 15:48:31 -05:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S The omap1's debug-macro.S is similar to the generic 8250 code. Compared to the 8520 code the omap1 macro automatically determines what UART to use based on breadcrumbs left by the bootloader and automatically copes with the eccentric register layout on OMAP7XX. This patch drops both these features and relies instead on the generic 8250 macros: 1. Dropping support for the bootloader breadcrumbs is identical to the way the migration was handled for OMAP2 (see 808b7e07464d...). 2. Support for OMAP7XX still exists but it must be configured by hand (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-omap@vger.kernel.org Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:33:50 +01:00
ARM: debug-ll: fix BCM63xx entry for multiplatform During my randconfig build testing, I found that a kernel with DEBUG_AT91_UART and ARCH_BCM_63XX fails to build: arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror] It turns out that the DEBUG_UART_BCM63XX option is enabled whenever the ARCH_BCM_63XX is, and that breaks multiplatform kernels because we then end up using the UART address from BCM63XX rather than the one we actually configured (if any). This changes the BCM63XX options to only have one Kconfig option, and only enable that if the user explicitly turns it on. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support") Cc: stable@vger.kernel.org
2016-01-18 10:45:00 +01:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: 8273/1: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX On EP93XX uncompress.h uses CONFIG_DEBUG_UART_PHYS instead of a hard coded serial port. This means the build breaks when DEBUG_LL (and DEBUG_LL_UART_PL01X) is not enabled. This is fixed by adding a new dependency. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:34:12 +01:00
ARM: 7850/1: DEBUG_LL on efm32 SoCs This implements output of debug messages on efm32 SoCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-08 16:44:17 +01:00
ARM: meson: debug: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk for MesonX SoCs on UARTAO. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-09 21:38:00 +02:00
ARM: Remove mach-msm and associated ARM architecture code The maintainers for mach-msm no longer have any plans to support or test the platforms supported by this architecture[1]. Most likely there aren't any active users of this code anyway, so let's delete it. [1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-13 11:09:34 -07:00
ARM: 8272/1: netx: Migrate DEBUG_LL macros to shared directory As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT which default to UART1 but allow a user to configure UART2 or UART3. We also introduce symbolic names for the registers and flags. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:34:03 +01:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: debug-ll: Add support for r8a7745 Enable low-level debugging support for RZ/G1E (r8a7745). RZ/G1E uses SCIF4 for the debug console. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-16 11:20:10 +01:00
ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14 16:49:47 +01:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: debug-ll: fix BCM63xx entry for multiplatform During my randconfig build testing, I found that a kernel with DEBUG_AT91_UART and ARCH_BCM_63XX fails to build: arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror] It turns out that the DEBUG_UART_BCM63XX option is enabled whenever the ARCH_BCM_63XX is, and that breaks multiplatform kernels because we then end up using the UART address from BCM63XX rather than the one we actually configured (if any). This changes the BCM63XX options to only have one Kconfig option, and only enable that if the user explicitly turns it on. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support") Cc: stable@vger.kernel.org
2016-01-18 10:45:00 +01:00
ARM: at91: debug: use DEBUG_UART_PHYS Instead of having to add a new configuration option each time support for new SoC is added, use CONFIG_DEBUG_UART_PHYS. For now, CONFIG_DEBUG_UART_VIRT is automatically computed. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-08-08 12:11:11 +02:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: add low level debug uart for rv1108 RK1108 UARTs are Synopsis DesignWare 8250 compatible. Only with different register addresses. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com> [rk1108->rv1108 rename] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-14 20:12:35 +08:00
ARM: 8272/1: netx: Migrate DEBUG_LL macros to shared directory As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT which default to UART1 but allow a user to configure UART2 or UART3. We also introduce symbolic names for the registers and flags. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:34:03 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: add lolevel debug support for asm9260 Since there is no public documentation, this patch also provide register offsets for different UART units on this SoC. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-24 12:08:28 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: bcm2835: Add Kconfig support for bcm2836 This should be a complete port of bcm2835 functionality to bcm2836 (Raspberry Pi 2). Signed-off-by: Eric Anholt <eric@anholt.net>
2015-02-24 15:07:55 +00:00
ARM: BCM5301X: add early debugging support This adds support for early debugging of BCM5301X SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 00:01:44 +01:00
ARM: debug: Add Hurricane 2 UART2 debug addresses Broadcom Hurricane 2 SoCs typically use their secondary UART for debug/console, provide a known good location for that. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-28 16:14:59 -07:00
ARM: mediatek: Add earlyprintk support for mt8127 & mt8135 Enable low-level debug for Mediatek mt8127 & mt8135 SoC. Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-04 15:30:54 +08:00
ARM: mediatek: Add earlyprintk support for mt6589 Enable low-level debug for Mediatek mt6589 SoC on UART0. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-18 16:58:00 +02:00
ARM: mediatek: Add earlyprintk support for mt8127 & mt8135 Enable low-level debug for Mediatek mt8127 & mt8135 SoC. Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-11-04 15:30:54 +08:00
ARM: debug-ll: rework integrator/versatile handling Enabling one of the integrator platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the integrator default addresses only if we have also picked the respective Kconfig symbols introduced here. Versatile is not yet part of multiplatform, but hopefully soon will be, so we do the same change for versatile as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i) sun6i/sun8i have a UART in the RTC block group, which can be used as an early console. This is most useful on sun8i as UART0 is muxed with MMC0, which is not available if we boot from MMC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-06-20 22:52:51 +08:00
ARM: debug-ll: reorder Kconfig alphanumerically The file has gotten a little out of sync, as platforms got added in the wrong place, or have been renamed. This moves the options around, but should not change any functionality. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:16:45 +01:00
ARM: debug-ll: rework lpc32xx handling LPC32xx can not yet be configured in a multiplatform kernel, but if we ever get there, enabling one of the LPC32xx platforms while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the LPC32xx default addresses only if we have also picked the respective Kconfig symbols introduced here. While we're at it, this also reorders the virtual address as it should be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com>
2015-12-03 17:54:05 +01:00
ARM: debug-ll: rework gemini handling Gemini can not yet be configured in a multiplatform kernel, but if we ever get there, enabling one of the gemini platforms while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the gemini default addresses and the flow control settings only if we have also picked the respective Kconfig symbols introduced here. While we're at it, this also reorders the virtual address as it should be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
2015-12-03 17:54:05 +01:00
ARM: pxa: fix hang on startup with DEBUG_LL The commit 2111667b4677 ("ARM: pxa: call debug_ll_io_init for earlyprintk") triggers in the current kernel the attached backtrace on PXA/tosa early in the boot time when DEBUG_LL is enabled. It is due to overlap between uart virtual memory defined in DEBUG_UART_VIRT and mapped by debug_ll_io_init() and peripheral bus mapped by pxa_map_io at the same address, 0xf2100000. As hinted by Arnd, map early virtual memory for low level debug on address 0xf6200000, even if that means 2 virtual mappings will give access to the pxa internal UARTs (FFUART, BTUART, STUART, ...). ------------[ cut here ]------------ kernel BUG at /home/lumag/linux/mm/vmalloc.c:1143! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-00032-g8e0d202-dirty #23 task: c062a5a8 ti: c0620000 task.ti: c0620000 PC is at vm_area_add_early+0x54/0x84 LR is at add_static_vm_early+0xc/0x60 pc : [<c03e1100>] lr : [<c03d9ef4>] psr: 800001d3 sp : c0621f04 ip : c03efa74 fp : c03edf84 r10: c0637e98 r9 : 40000001 r8 : c03da57c r7 : c3ffcfb0 r6 : 00000000 r5 : c3ffcfb0 r4 : 02000000 r3 : c3ffcfd8 r2 : f2100000 r1 : f4000000 r0 : c3ffcfb0 Flags: Nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 00007977 Table: a0004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc06201c8) Stack: (0xc0621f04 to 0xc0622000) 1f00: c3ffcfd8 40000001 c3ffcfd8 c03ee08c c03da570 c03db90c c0637d24 1f20: 00000000 c03ec7cc c066e654 a0700000 000a0700 c03db914 c03db90c c03daf84 1f40: 00000000 000a0000 c0000000 c03ec7cc 000a0700 c0700000 ffff1000 000a3fff 1f60: 00001000 00000007 00000000 c03ec7cc c0008000 c03ed748 c0621fd4 c03d5d18 1f80: 69052d00 a03ec48c 00000000 c03d8ad0 0000006c 00007977 c036c6e8 00000001 1fa0: c0621fd4 c03ed744 c0628000 a0004000 69052d00 a03ec48c 00000000 c03d68d4 1fc0: 00000000 00000000 00000000 00000000 00000000 c03ed748 c0649894 c062801c 1fe0: c03ed744 c062b2f0 a0004000 69052d00 a03ec48c a0008040 00000000 00000000 [<c03e1100>] (vm_area_add_early) from [<c03d9ef4>] (add_static_vm_early+0xc/0x60) [<c03d9ef4>] (add_static_vm_early) from [<c03da570>] (iotable_init.part.6+0xa8/0xb4) [<c03da570>] (iotable_init.part.6) from [<c03db914>] (pxa25x_map_io+0x8/0x24) [<c03db914>] (pxa25x_map_io) from [<c03daf84>] (paging_init+0x744/0x8d8) [<c03daf84>] (paging_init) from [<c03d8ad0>] (setup_arch+0x354/0x608) [<c03d8ad0>] (setup_arch) from [<c03d68d4>] (start_kernel+0xa8/0x3dc) [<c03d68d4>] (start_kernel) from [<a0008040>] (0xa0008040) Code: e5904008 e0811004 e1520001 2a000005 (e7f001f2) ---[ end trace f24b6c88ae00fa9a ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! Cc: <stable@vger.kernel.org> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-10-07 21:18:14 +02:00
ARM: sunxi: Add debug uart used by sun9i (Allwinner A80) The uarts on sun9i are still compatible with the dw_8250, but are located at different addresses. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-09-24 22:48:56 +08:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16 06:59:18 +09:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: add Marvell Berlin UART0 lowlevel debug This adds UART0 as found on Marvell 88DE3xxx SoCs, e.g. Armada 1500 to the list of possible lowlevel debug options. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-09-09 14:10:54 +02:00
ARM: debug: add HiP04 debug uart Add the support of Hisilicon HiP04 debug uart. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2013-12-20 15:01:41 +08:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: debug: Use generic 8250 debug_ll for am3517 and am335x We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:14 -07:00
ARM: debug: Use generic 8250 debug_ll for ti81xx We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:14 -07:00
ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-16 22:10:13 -07:00
ARM: debug: Use generic 8250 debug_ll for omap3/4/5 We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14 00:31:13 -07:00
ARM: debug: qcom: make UART address selection configuration option Separate Qualcomm low-level debugging UART to two options. DEBUG_MSM_UART is used in earlier non-multi platform arches, like MSM7X00A, QSD8X50 and MSM7X30. DEBUG_QCOM_UARTDM is used in multi-plafrom arches and have embedded data mover. Make DEBUG_UART_PHYS and DEBUG_UART_BASE user adjustable by Kconfig menu. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-04-14 16:47:34 +03:00
CNS3xxx: Fix debug UART. UARTs on CNS3xxx are 8250-compatible, not AMBA. The base address for UART0 is 0x78000000 (physical) and 0xfb002000 (virtual). Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-16 12:35:10 +02:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: at91: debug: add default DEBUG_LL addresses Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 12:21:38 +02:00
ARM: debug: Use generic 8250 debug_ll for omap3/4/5 We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-14 00:31:13 -07:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: zx: add low level debug support for zx296702 Use the UART0 peripheral for low level debug. Only the UART port 0 is currently supported. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 17:18:07 +08:00
ARM: debug-ll: fix BCM63xx entry for multiplatform During my randconfig build testing, I found that a kernel with DEBUG_AT91_UART and ARCH_BCM_63XX fails to build: arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror] It turns out that the DEBUG_UART_BCM63XX option is enabled whenever the ARCH_BCM_63XX is, and that breaks multiplatform kernels because we then end up using the UART address from BCM63XX rather than the one we actually configured (if any). This changes the BCM63XX options to only have one Kconfig option, and only enable that if the user explicitly turns it on. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support") Cc: stable@vger.kernel.org
2016-01-18 10:45:00 +01:00
ARM: debug-ll: rework SPEAr handling Enabling one of the SPEAr platforms in a multiplatform kernel while trying to use DEBUG_LL for another platform can default to the wrong UART address, as the options are purely based on the architecture being enabled or not. This changes the logic to use the SPEAr default addresses only if we have also picked the respective Kconfig symbols introduced here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 17:54:05 +01:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
ARM: Alpine: early-debug print support Alpine platform includes UART8250 that can be used for early prints. Signed-off-by: Saeed Bishara <saeed@annapurnalabs.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-12 13:53:04 +02:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: 7932/1: bcm: Add DEBUG_LL console support This patch adds low level debug uart support to Broadcom mobile based SOCs. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Tested-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-23 09:00:01 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: Rename Hi3716 to HIX5HD2 Rename Hisilicon HI3716 to HIX5HD2 and add dependency on ARCH_HIX5HD2. HiX5HD2 is a SoC with dual Cortex A9 cores for STB market, and original Hi3xxx SoC is for mobile market. To avoid confusing the two types of SoCs and also because of different implementation (SMP, IPs integrated and earlycon config), rename Hi3716 to HIX5HD2 and add ARCH_HIX5HD2. Signed-off-by: Haifeng Yan <yanhaifeng@gmail.com> Signed-off-by: Jiancheng Xue <jchxue@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> [olof: fixed description typos] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-04-11 11:40:58 +08:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: socfpga: Add support for UART1 debug uart for earlyprintk Add support for hardware uart1 for earlyprintk support on Arria10 devkit. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-09 15:48:31 -05:00
ARM: debug-ll: reorganize mvebu debug uart config As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll configuration options for these platforms are conflicting with the multiplatform configuration: enabling one of those platforms sometimes changes the default addresses to the ones used on one of them, rather than the one that was selected in Kconfig. This changes the configuration so we share the physical address configuration with mach-mvebu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:48:23 +01:00
ARM: mvebu: Add UART1 as DEBUG_LL possible target Some mvebu boards have the UART1 more easily accessible than the other UARTs found on the system. Add a debug_ll option for this case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-08 18:38:04 +01:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: sirf: add two debug ports for CSRatlas7 SoC this patch adds UART0 and UART1 as LLUART port, as the new Atlas7 registers layout are different, it also refines some names of old hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT to define different base addresses for multiple ports. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-04 17:40:54 +08:00
ARM: rockchip: add debug uart used by rk3288 The uarts on rk3288 are still compatible with the dw_8250, but located at a different position and need DEBUG_UART_8250_WORD enabled. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-06-28 13:31:17 +02:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sorted This patch sorts the entries for DEBUG_UART_{PHYS,VIRT}. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-12 06:07:23 +01:00
ARM: debug-ll: rework ep93xx handling This makes ep93xx debug-ll handling more consistent with the other platforms, by adding a separate Kconfig symbol for it that in turn selects the standard DEBUG_UART_PL01X symbol. We still have to pick a physical address even if DEBUG_LL is disabled here, because the EP93xx uncompress output code uses CONFIG_DEBUG_UART_PHYS. If we ever move to multiplatform support, this can go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 16:19:22 +01:00
ARM: debug-ll: rework footbridge handling Footbridge has two debug ports that are handled a bit differently: The 8250 port uses the normal debug/8250.S implementation that is shared with a lot of other platforms, but it relies on the DEBUG_UART_8250 option to be turned on automatically instead of being selected by DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing this to use a 'select' and change the dependency to the debug symbol rather than the platform symbol for consistency. The DC21285 UART has a separate top-level option, and relies on the traditional include/mach/debug-macro.S method. With the s3c64xx multiplatform series queued up for 4.5, it is now the last one that does this, so by moving this file to include/debug/dc21285.S, we can get all platforms to do things the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:27:53 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sorted This patch sorts the entries for DEBUG_UART_{PHYS,VIRT}. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-12 06:07:23 +01:00
ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S The omap1's debug-macro.S is similar to the generic 8250 code. Compared to the 8520 code the omap1 macro automatically determines what UART to use based on breadcrumbs left by the bootloader and automatically copes with the eccentric register layout on OMAP7XX. This patch drops both these features and relies instead on the generic 8250 macros: 1. Dropping support for the bootloader breadcrumbs is identical to the way the migration was handled for OMAP2 (see 808b7e07464d...). 2. Support for OMAP7XX still exists but it must be configured by hand (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-omap@vger.kernel.org Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:33:50 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: add HiP01 debug uart Add the support of Hisilicon HiP01 debug uart. The uart of hip01 is 8250 compatible. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-24 03:09:56 +00:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: meson: debug: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk for MesonX SoCs on UARTAO. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-09 21:38:00 +02:00
ARM: Remove mach-msm and associated ARM architecture code The maintainers for mach-msm no longer have any plans to support or test the platforms supported by this architecture[1]. Most likely there aren't any active users of this code anyway, so let's delete it. [1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-13 11:09:34 -07:00
ARM: 8272/1: netx: Migrate DEBUG_LL macros to shared directory As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT which default to UART1 but allow a user to configure UART2 or UART3. We also introduce symbolic names for the registers and flags. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09 18:34:03 +01:00
ARM: s3c64xx: use common debug-ll implementation The uart on s3c64xx is essentially the same as on s3c24xx, so we can share a single assembler file. However, the addresses are different, and we need to add the respective Kconfig magic to get the right addresses. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25 17:11:24 +02:00
ARM: debug-ll: fix BCM63xx entry for multiplatform During my randconfig build testing, I found that a kernel with DEBUG_AT91_UART and ARCH_BCM_63XX fails to build: arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror] It turns out that the DEBUG_UART_BCM63XX option is enabled whenever the ARCH_BCM_63XX is, and that breaks multiplatform kernels because we then end up using the UART address from BCM63XX rather than the one we actually configured (if any). This changes the BCM63XX options to only have one Kconfig option, and only enable that if the user explicitly turns it on. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support") Cc: stable@vger.kernel.org
2016-01-18 10:45:00 +01:00
ARM: at91: debug: use DEBUG_UART_VIRT AT91 still uses an offset (0x0100 0000) from the physical address to map the debug UART. This is unfortunate as for some platforms (sama5d3 and earlier), it ends up in the PCI zone and PCI is enabled in multi_v7. Switch to DEBUG_UART_VIRT to solve that. Tested on sama5d3 and 9g20. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-07 17:24:39 +02:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug-ll: rework footbridge handling Footbridge has two debug ports that are handled a bit differently: The 8250 port uses the normal debug/8250.S implementation that is shared with a lot of other platforms, but it relies on the DEBUG_UART_8250 option to be turned on automatically instead of being selected by DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing this to use a 'select' and change the dependency to the debug symbol rather than the platform symbol for consistency. The DC21285 UART has a separate top-level option, and relies on the traditional include/mach/debug-macro.S method. With the s3c64xx multiplatform series queued up for 4.5, it is now the last one that does this, so by moving this file to include/debug/dc21285.S, we can get all platforms to do things the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:27:53 +01:00
ARM: debug: Add Hurricane 2 UART2 debug addresses Broadcom Hurricane 2 SoCs typically use their secondary UART for debug/console, provide a known good location for that. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-28 16:14:59 -07:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: provide 8250 debug uart flow control configuration option Move the definition out of the machine class debug-macro.S header into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 22:59:10 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug-ll: fix UART configuration with ARCH_KEYSTONE We may have multiple platforms enabled and also DEBUG_LL configured for one of them. However if we enable ARCH_KEYSTONE, we default to using 32-bit UART access independent of which platform we are actually using, which can be confusing. This changes the logic so the 32-bit default gets only used by default if we actually configure the keystone UART, as opposed to picking some other 8250 setting on a kernel that has keystone support enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 14:41:11 +01:00
ARM: socfpga: Add support for UART1 debug uart for earlyprintk Add support for hardware uart1 for earlyprintk support on Arria10 devkit. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-09 15:48:31 -05:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: davinci: remove tnetv107x support The tnetv107x support does not compile, and seems to have been broken for a while with nobody caring to fix it. So far everyone I asked said it's probably dead and completely unused and will never again be needed in a future kernel release, so let's delete it. If someone finds a use for this code later and is able to get it to work again, we can always revert the removal. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org>
2014-02-12 22:22:00 +01:00
ARM: brcmstb: Add earlyprintk support using run-time checks The SUN_TOP_CTRL_FAMILY_ID register is at a fixed absolute address for all of our supported chips, so utilize its value to determine what the UARTA base address should be based on the value we read. Since the code is called both during decompressor when the MMU is off, and after the MMU has been turned on in the kernel, and we want to do the lookup only once, we use the same technique as tegra.S and have a shared storage location between the decompressor and the kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-28 12:18:51 -07:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: add support for Palmchip BK-310x UART Some SoCs use a Palmchip BK-310x UART which is mostly 16550 compatible but with a different register layout. While this UART has previously only been supported in MIPS based chips (Alchemy, Ralink), the ARM based SMP87xx series from Sigma Designs also uses it. This patch allows the debug console to work with this type of UART. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-05 10:49:22 +01:00
ARM: debug: provide 8250 debug uart flow control configuration option Move the definition out of the machine class debug-macro.S header into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 22:59:10 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug-ll: rework footbridge handling Footbridge has two debug ports that are handled a bit differently: The 8250 port uses the normal debug/8250.S implementation that is shared with a lot of other platforms, but it relies on the DEBUG_UART_8250 option to be turned on automatically instead of being selected by DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing this to use a 'select' and change the dependency to the debug symbol rather than the platform symbol for consistency. The DC21285 UART has a separate top-level option, and relies on the traditional include/mach/debug-macro.S method. With the s3c64xx multiplatform series queued up for 4.5, it is now the last one that does this, so by moving this file to include/debug/dc21285.S, we can get all platforms to do things the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-03 18:27:53 +01:00
ARM: debug: provide 8250 debug uart flow control configuration option Move the definition out of the machine class debug-macro.S header into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 22:59:10 +01:00
ARM: 7672/1: uncompress debug support for multiplatform build Instead of giving zero support of uncompress debug for multiplatform build, the patch turns uncompress debug into one part of DEBUG_LL support. When DEBUG_LL is turned on for a particular platform, uncompress debug works too for that platform. OMAP and Tegra are exceptions here. OMAP low-level debug code places data in the .data section, and that is not allowed in decompressor. And Tegra code has reference to variable that's unavailable in decompressor but only in kernel. That's why Kconfig symbol DEBUG_UNCOMPRESS controlling multiplatform uncompress debug support is defined with !DEBUG_OMAP2PLUS_UART && !DEBUG_TEGRA_UART. It creates arch/arm/boot/compressed/debug.S with CONFIG_DEBUG_LL_INCLUDE included there, implements a generic putc() using those macros, which will be built when DEBUG_UNCOMPRESS is defined. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 08:48:06 +01:00
ARM: make decompressor debug output user selectable Make the decompressor debug output user selectable, otherwise merely enabling DEBUG_LL causes the decompressor to become board specific, thereby preventing a multi-platform kernel from booting. Enabling DEBUG_LL doesn't cause the kernel itself to become platform specific unless EARLY_PRINTK is enabled, or one of the debugging routines is added in a path that results in it being called. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-16 11:46:22 +00:00
ARM: introduce ARM_SINGLE_ARMV7M for ARMv7-M platforms This introduces a new top level config symbol ARM_SINGLE_ARMV7M for non-MMU, ARMv7-M platforms. It also support multiple ARMv7-M platforms in one kernel image since the cores share the same basic memory layout and interrupt controller. However, this works only if the combined platforms also have a similar (main) memory layout. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-20 00:03:51 +02:00
ARM: make decompressor debug output user selectable Make the decompressor debug output user selectable, otherwise merely enabling DEBUG_LL causes the decompressor to become board specific, thereby preventing a multi-platform kernel from booting. Enabling DEBUG_LL doesn't cause the kernel itself to become platform specific unless EARLY_PRINTK is enabled, or one of the debugging routines is added in a path that results in it being called. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-16 11:46:22 +00:00
ARM: brcmstb: Add earlyprintk support using run-time checks The SUN_TOP_CTRL_FAMILY_ID register is at a fixed absolute address for all of our supported chips, so utilize its value to determine what the UARTA base address should be based on the value we read. Since the code is called both during decompressor when the MMU is off, and after the MMU has been turned on in the kernel, and we want to do the lookup only once, we use the same technique as tegra.S and have a shared storage location between the decompressor and the kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-28 12:18:51 -07:00
ARM: document DEBUG_UNCOMPRESS Kconfig option This non-user visible option lacked any kind of documentation. This is quite common for non-user visible options; certian people can't understand the point of documenting such options with help text. However, here we have a case in point: developers don't understand the option either, as they were thinking that when the option is not set, the decompressor should produce no output what so ever. This is incorrect, as the purpose of this option is to control whether a multiplatform kernel uses the kernel debugging macros to produce output or not. So let's document this via help rather than commentry to prevent others falling into this misunderstanding. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 17:54:27 +01:00
ARM: 7672/1: uncompress debug support for multiplatform build Instead of giving zero support of uncompress debug for multiplatform build, the patch turns uncompress debug into one part of DEBUG_LL support. When DEBUG_LL is turned on for a particular platform, uncompress debug works too for that platform. OMAP and Tegra are exceptions here. OMAP low-level debug code places data in the .data section, and that is not allowed in decompressor. And Tegra code has reference to variable that's unavailable in decompressor but only in kernel. That's why Kconfig symbol DEBUG_UNCOMPRESS controlling multiplatform uncompress debug support is defined with !DEBUG_OMAP2PLUS_UART && !DEBUG_TEGRA_UART. It creates arch/arm/boot/compressed/debug.S with CONFIG_DEBUG_LL_INCLUDE included there, implements a generic putc() using those macros, which will be built when DEBUG_UNCOMPRESS is defined. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 08:48:06 +01:00
ARM: 7671/1: use Kconfig to select uncompress.h Following the approach handling DEBUG_LL inclusion, the patch creates a Kconfig symbol CONFIG_UNCOMPRESS_INCLUDE for choosing the correct uncompress header. For traditional build, mach/uncompress.h will be included in arch/arm/boot/compressed/misc.c. For multiplatform build, debug/uncompress.h which contains a suite of empty functions will be used. In this way, a platform with particular uncompress.h implementation could choose its own uncompress.h with this Kconfig option. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 08:47:27 +01:00
ARM: debug: Use generic uncompress.h for exynos As a pre-requisite step towards enabling multi-platform support for Exynos, enable it to use generic uncompress.h instead of the one provided in machine code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-24 09:38:12 +09:00
ARM: shmobile: remove ARCH_SHMOBILE_LEGACY option With Bock-W, the last legacy platform has been removed. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-14 15:51:06 +02:00
ARM: 7671/1: use Kconfig to select uncompress.h Following the approach handling DEBUG_LL inclusion, the patch creates a Kconfig symbol CONFIG_UNCOMPRESS_INCLUDE for choosing the correct uncompress header. For traditional build, mach/uncompress.h will be included in arch/arm/boot/compressed/misc.c. For multiplatform build, debug/uncompress.h which contains a suite of empty functions will be used. In this way, a platform with particular uncompress.h implementation could choose its own uncompress.h with this Kconfig option. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 08:47:27 +01:00
ARM: Add an earlyprintk debug console This patch allows an earlyprintk console if CONFIG_DEBUG_LL is enabled, using the printch asm function. The patch is based on the original work by Sascha Hauer. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-12-09 10:02:18 +00:00
ARM: kprobes: Add config option for selecting the ARM kprobes tests Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-08-27 12:36:58 +01:00
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process This patch introduces a new Kconfig option which, when enabled, causes the kernel to write the PID of the current task into the PROCID field of the CONTEXTIDR on context switch. This is useful when analysing hardware trace, since writes to this register can be configured to emit an event into the trace stream. The thread notifier for writing the PID is deliberately kept separate from the ASID-writing code so that we can support newer processors using LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is updated to perform a read-modify-write sequence to ensure that we don't clobber the PID on CPUs using the classic 2-level page tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-06 15:43:03 +01:00
coresight: moving to new "hwtracing" directory Keeping drivers related to HW tracing on ARM, i.e coresight, under "drivers/coresight" doesn't make sense when other architectures start rolling out technologies of the same nature. As such creating a new "drivers/hwtracing" directory where all drivers of the same kind can reside, reducing namespace pollution under "drivers/". Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-30 14:13:41 -06:00
coresight-etm: add CoreSight ETM/PTM driver This driver manages CoreSight ETM (Embedded Trace Macrocell) that supports processor tracing. Currently supported version are ARM ETMv3.x and PTM1.x. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> coresight-etm3x: adding missing error checking Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03 11:07:41 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00