linux

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

2010-03-24 17:04:11 +09:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Add include/linux/freezer.h and move definitions from sched.h Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-06 20:34:23 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] NLM: fix a client-side race on blocking locks. If the lock blocks, the server may send us a GRANTED message that races with the reply to our LOCK request. Make sure that we catch the GRANTED by queueing up our request on the nlm_blocked list before we send off the first LOCK rpc call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-06-22 17:16:31 +00:00

NLM: Ensure that nlmclnt_cancel_callback() doesn't loop forever If the server returns NLM_LCK_DENIED_NOLOCKS, we currently retry the entire NLM_CANCEL request. This may end up looping forever unless the server changes its mind (why would it do that, though?). Ensure that we limit the number of retries (to 3). See bug# 5957 in bugzilla.kernel.org. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-02-01 12:18:25 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Fix arguments to NLM_CANCEL call The OpenGroup docs state that the arguments "block", "exclusive" and "alock" must exactly match the arguments for the lock call that we are trying to cancel. Currently, "block" is always set to false, which is wrong. See bug# 5956 on bugzilla.kernel.org. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-02-01 12:18:22 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] knfsd: make nlmclnt_next_cookie SMP safe The way we incremented the NLM cookie in nlmclnt_next_cookie was not thread safe. This patch changes the counter to an atomic_t Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-10-04 02:16:02 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] knfsd: make nlmclnt_next_cookie SMP safe The way we incremented the NLM cookie in nlmclnt_next_cookie was not thread safe. This patch changes the counter to an atomic_t Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-10-04 02:16:02 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] knfsd: make nlmclnt_next_cookie SMP safe The way we incremented the NLM cookie in nlmclnt_next_cookie was not thread safe. This patch changes the counter to an atomic_t Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-10-04 02:16:02 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: convert nlm_lockowner.count from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nlm_lockowner.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the nlm_lockowner.count it might make a difference in following places: - nlm_put_lockowner(): decrement in refcount_dec_and_lock() only provides RELEASE ordering, control dependency on success and holds a spin lock on success vs. fully ordered atomic counterpart. No changes in spin lock guarantees. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-11-29 13:15:45 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: convert nlm_lockowner.count from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nlm_lockowner.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the nlm_lockowner.count it might make a difference in following places: - nlm_put_lockowner(): decrement in refcount_dec_and_lock() only provides RELEASE ordering, control dependency on success and holds a spin lock on success vs. fully ordered atomic counterpart. No changes in spin lock guarantees. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-11-29 13:15:45 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Create client-side nlm_host cache NFS clients don't need the garbage collection processing that is performed on nlm_host structures. The client picks up an nlm_host at mount time and holds a reference to it until the file system is unmounted. Servers, on the other hand, don't have a precise way to tell when an nlm_host is no longer being used, so zero refcount nlm_host entries are left to expire in the cache after a time. Basically there's nothing holding a reference to an nlm_host between individual server-side NLM requests, but we can't afford the expense of recreating them for every new NLM request from a client. The nlm_host cache adds some lifetime hysteresis to entries in the cache so the next time a particular nlm_host is needed, it's likely to be discovered by a lookup rather than created from whole cloth. With the new implementation, client nlm_host cache items are no longer garbage collected, and are destroyed directly by a new release function specialized for client entries, nlmclnt_release_host(). They are cached in their own data structure, and have their own lookup logic, simplified and specialized for client nlm_host entries. However, the client nlm_host cache still shares reboot recovery logic with the server nlm_host cache. The NSM "peer rebooted" downcall for clients and servers still come through the same RPC call. This is a legacy formal API that would be difficult to alter, and besides, the user space NSM implementation can't tell the difference between peers that are clients or servers. For this reason, the client cache continues to share the nlm_host_mutex (and reboot recovery logic) with the server cache. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-12-14 15:05:52 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] fs: Removing useless casts * Removing useless casts * Removing useless wrapper * Conversion from kmalloc+memset to kzalloc Signed-off-by: Panagiotis Issaris <takis@issaris.org> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-09-27 01:49:39 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: convert nlm_lockowner.count from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nlm_lockowner.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the nlm_lockowner.count it might make a difference in following places: - nlm_put_lockowner(): decrement in refcount_dec_and_lock() only provides RELEASE ordering, control dependency on success and holds a spin lock on success vs. fully ordered atomic counterpart. No changes in spin lock guarantees. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-11-29 13:15:45 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] kfree cleanup: fs This is the fs/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in fs/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-11-07 01:01:34 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs Firstly, nlmclnt_setlockargs can be called from a reclaimer thread, in which case we're in entirely the wrong namespace. Secondly, commit 8aac62706adaaf0fab02c4327761561c8bda9448 (move exit_task_namespaces() outside of exit_notify()) now means that exit_task_work() is called after exit_task_namespaces(), which triggers an Oops when we're freeing up the locks. Fix this by ensuring that we initialise the nlm_host's rpc_client at mount time, so that the cl_nodename field is initialised to the value of utsname()->nodename that the net namespace uses. Then replace the lockd callers of utsname()->nodename. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Toralf Förster <toralf.foerster@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Nix <nix@esperi.org.uk> Cc: Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org # 3.10.x

2013-08-05 12:06:12 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

new helper: file_inode(file) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

2013-01-23 17:07:38 -05:00

LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs Firstly, nlmclnt_setlockargs can be called from a reclaimer thread, in which case we're in entirely the wrong namespace. Secondly, commit 8aac62706adaaf0fab02c4327761561c8bda9448 (move exit_task_namespaces() outside of exit_notify()) now means that exit_task_work() is called after exit_task_namespaces(), which triggers an Oops when we're freeing up the locks. Fix this by ensuring that we initialise the nlm_host's rpc_client at mount time, so that the cl_nodename field is initialised to the value of utsname()->nodename that the net namespace uses. Then replace the lockd callers of utsname()->nodename. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Toralf Förster <toralf.foerster@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Nix <nix@esperi.org.uk> Cc: Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org # 3.10.x

2013-08-05 12:06:12 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Don't expose the process pid to the NLM server Instead we use the nlm_lockowner->pid. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:06 -05:00

LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs Firstly, nlmclnt_setlockargs can be called from a reclaimer thread, in which case we're in entirely the wrong namespace. Secondly, commit 8aac62706adaaf0fab02c4327761561c8bda9448 (move exit_task_namespaces() outside of exit_notify()) now means that exit_task_work() is called after exit_task_namespaces(), which triggers an Oops when we're freeing up the locks. Fix this by ensuring that we initialise the nlm_host's rpc_client at mount time, so that the cl_nodename field is initialised to the value of utsname()->nodename that the net namespace uses. Then replace the lockd callers of utsname()->nodename. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Toralf Förster <toralf.foerster@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Nix <nix@esperi.org.uk> Cc: Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org # 3.10.x

2013-08-05 12:06:12 -04:00

lockd: Don't expose the process pid to the NLM server Instead we use the nlm_lockowner->pid. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:06 -05:00

NLM: Simplify client locks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:44 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Remove BUG_ON()s from fs/lockd/clntproc.c Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2012-10-15 17:28:45 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/NFS: Use cached nlm_host when calling nlmclnt_proc() Now that each NFS mount point caches its own nlm_host structure, it can be passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for each mount point, we trade the overhead of looking up or creating a fresh nlm_host struct during every NLM procedure call for a little extra memory. We also restrict the nlmclnt_proc symbol to limit the use of this call to in-tree modules. Note that nlm_lookup_host() (just removed from the client's per-request NLM processing) could also trigger an nlm_host garbage collection. Now client-side nlm_host garbage collection occurs only during NFS mount processing. Since the NFS client now holds a reference on these nlm_host structures, they wouldn't have been affected by garbage collection anyway. Given that nlm_lookup_host() reorders the global nlm_host chain after every successful lookup, and that a garbage collection could be triggered during the call, we've removed a significant amount of per-NLM-request CPU processing overhead. Sidebar: there are only a few remaining references to the internals of NFS inodes in the client-side NLM code. The only references I found are related to extracting or comparing the inode's file handle via NFS_FH(). One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-01-11 17:09:59 -05:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

NLM/NFS: Use cached nlm_host when calling nlmclnt_proc() Now that each NFS mount point caches its own nlm_host structure, it can be passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for each mount point, we trade the overhead of looking up or creating a fresh nlm_host struct during every NLM procedure call for a little extra memory. We also restrict the nlmclnt_proc symbol to limit the use of this call to in-tree modules. Note that nlm_lookup_host() (just removed from the client's per-request NLM processing) could also trigger an nlm_host garbage collection. Now client-side nlm_host garbage collection occurs only during NFS mount processing. Since the NFS client now holds a reference on these nlm_host structures, they wouldn't have been affected by garbage collection anyway. Given that nlm_lookup_host() reorders the global nlm_host chain after every successful lookup, and that a garbage collection could be triggered during the call, we've removed a significant amount of per-NLM-request CPU processing overhead. Sidebar: there are only a few remaining references to the internals of NFS inodes in the client-side NLM code. The only references I found are related to extracting or comparing the inode's file handle via NFS_FH(). One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-01-11 17:09:59 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

NLM/NFS: Use cached nlm_host when calling nlmclnt_proc() Now that each NFS mount point caches its own nlm_host structure, it can be passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for each mount point, we trade the overhead of looking up or creating a fresh nlm_host struct during every NLM procedure call for a little extra memory. We also restrict the nlmclnt_proc symbol to limit the use of this call to in-tree modules. Note that nlm_lookup_host() (just removed from the client's per-request NLM processing) could also trigger an nlm_host garbage collection. Now client-side nlm_host garbage collection occurs only during NFS mount processing. Since the NFS client now holds a reference on these nlm_host structures, they wouldn't have been affected by garbage collection anyway. Given that nlm_lookup_host() reorders the global nlm_host chain after every successful lookup, and that a garbage collection could be triggered during the call, we've removed a significant amount of per-NLM-request CPU processing overhead. Sidebar: there are only a few remaining references to the internals of NFS inodes in the client-side NLM code. The only references I found are related to extracting or comparing the inode's file handle via NFS_FH(). One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-01-11 17:09:59 -05:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

lockd: handle lockowner allocation failure in nlmclnt_proc() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

2012-07-29 23:17:39 +04:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/NFS: Use cached nlm_host when calling nlmclnt_proc() Now that each NFS mount point caches its own nlm_host structure, it can be passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for each mount point, we trade the overhead of looking up or creating a fresh nlm_host struct during every NLM procedure call for a little extra memory. We also restrict the nlmclnt_proc symbol to limit the use of this call to in-tree modules. Note that nlm_lookup_host() (just removed from the client's per-request NLM processing) could also trigger an nlm_host garbage collection. Now client-side nlm_host garbage collection occurs only during NFS mount processing. Since the NFS client now holds a reference on these nlm_host structures, they wouldn't have been affected by garbage collection anyway. Given that nlm_lookup_host() reorders the global nlm_host chain after every successful lookup, and that a garbage collection could be triggered during the call, we've removed a significant amount of per-NLM-request CPU processing overhead. Sidebar: there are only a few remaining references to the internals of NFS inodes in the client-side NLM code. The only references I found are related to extracting or comparing the inode's file handle via NFS_FH(). One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-01-11 17:09:59 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: nlm_alloc_call should not immediately fail on signal Currently, nlm_alloc_call tests for a signal before it even tries to allocate memory. Fix it so that it tries at least once. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:05 -05:00

lockd: convert nlm_rqst.a_count from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nlm_rqst.a_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the nlm_rqst.a_count it might make a difference in following places: - nlmclnt_release_call() and nlmsvc_release_call(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-11-29 13:15:46 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: shift grabbing a reference to nlm_host into nlm_alloc_call() It's used both for client and server hosts; we can't do nlmclnt_release_host() on failure exits, since the host might need nlmsvc_release_host(), with BUG_ON() for calling the wrong one. Makes life simpler for callers, actually... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

2012-07-26 00:39:50 +04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: nlm_alloc_call should not immediately fail on signal Currently, nlm_alloc_call tests for a signal before it even tries to allocate memory. Fix it so that it tries at least once. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:05 -05:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

[PATCH] fs: fix-up schedule_timeout() usage Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use helper functions to convert between human time units and jiffies rather than constant HZ division to avoid rounding errors. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-09-10 00:27:23 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Split nlm_release_call() The nlm_release_call() function is invoked from both the server and the client side. We're about to introduce a distinct server- and client-side nlm_release_host(), so nlm_release_call() must first be split into a client-side and a server-side version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-12-14 15:05:42 +00:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

lockd: convert nlm_rqst.a_count from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nlm_rqst.a_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the nlm_rqst.a_count it might make a difference in following places: - nlmclnt_release_call() and nlmsvc_release_call(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-11-29 13:15:46 +02:00

NLM/lockd: Add a reference counter to struct nlm_rqst When we replace the existing synchronous RPC calls with asynchronous calls, the reference count will be needed in order to allow us to examine the result of the RPC call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 18:58:49 -04:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

lockd: Create client-side nlm_host cache NFS clients don't need the garbage collection processing that is performed on nlm_host structures. The client picks up an nlm_host at mount time and holds a reference to it until the file system is unmounted. Servers, on the other hand, don't have a precise way to tell when an nlm_host is no longer being used, so zero refcount nlm_host entries are left to expire in the cache after a time. Basically there's nothing holding a reference to an nlm_host between individual server-side NLM requests, but we can't afford the expense of recreating them for every new NLM request from a client. The nlm_host cache adds some lifetime hysteresis to entries in the cache so the next time a particular nlm_host is needed, it's likely to be discovered by a lookup rather than created from whole cloth. With the new implementation, client nlm_host cache items are no longer garbage collected, and are destroyed directly by a new release function specialized for client entries, nlmclnt_release_host(). They are cached in their own data structure, and have their own lookup logic, simplified and specialized for client nlm_host entries. However, the client nlm_host cache still shares reboot recovery logic with the server nlm_host cache. The NSM "peer rebooted" downcall for clients and servers still come through the same RPC call. This is a legacy formal API that would be difficult to alter, and besides, the user space NSM implementation can't tell the difference between peers that are clients or servers. For this reason, the client cache continues to share the nlm_host_mutex (and reboot recovery logic) with the server cache. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-12-14 15:05:52 +00:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

lockd: Split nlm_release_call() The nlm_release_call() function is invoked from both the server and the client side. We're about to introduce a distinct server- and client-side nlm_release_host(), so nlm_release_call() must first be split into a client-side and a server-side version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-12-14 15:05:42 +00:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Cleanup patch for process freezing 1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-06-24 23:13:50 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: properly convert be32 values in debug messages lockd: server returns status 50331648 it's quite hard to understand that number in this message is 3 in big endian Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2011-06-01 16:54:32 +04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

lockd: Add helper for *_RES callbacks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

NLM: Fix double free in __nlm_async_call rpc_call_async() will always call rpc_release_calldata(), so it is an error for __nlm_async_call() to do so as well. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2007-02-02 15:37:43 -08:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

lockd: Add helper for *_RES callbacks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

lockd: Add helper for *_RES callbacks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

NLM/lockd: convert __nlm_async_call to use rpc_run_task() Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-03-28 16:04:36 -04:00

lockd: Add helper for *_RES callbacks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

nfs: set correct fl_len in nlmclnt_test() fcntl(F_GETLK) on an nfs client incorrectly returns the values for the conflicting lock. fl_len value is always 1. If the conflicting lock is (0, 4095) the F_GETLK request for (1024, 10) returns (0, 1), which doesn't even cover the requested range, and is quite confusing. The fix is trivial, set fl_end from the fl_end value recieved from the nfs server. Signed-off-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-07-15 12:40:22 -05:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

lockd: Split nlm_release_call() The nlm_release_call() function is invoked from both the server and the client side. We're about to introduce a distinct server- and client-side nlm_release_host(), so nlm_release_call() must first be split into a client-side and a server-side version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-12-14 15:05:42 +00:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Remove BKL from the client This patch removes all calls to lock_kernel() from the client. This patch should be applied after the "fs/lock.c prepare for BKL removal" patch submitted by Arnd Bergmann on September 18. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-09-22 09:50:35 -04:00

lockd: Fix Oopses due to list manipulation errors. The patch "stop abusing file_lock_list introduces a couple of bugs since the locks may be copied and need to be removed from the lists when they are destroyed. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:41 -05:00

lockd: Remove BKL from the client This patch removes all calls to lock_kernel() from the client. This patch should be applied after the "fs/lock.c prepare for BKL removal" patch submitted by Arnd Bergmann on September 18. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-09-22 09:50:35 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Remove BKL from the client This patch removes all calls to lock_kernel() from the client. This patch should be applied after the "fs/lock.c prepare for BKL removal" patch submitted by Arnd Bergmann on September 18. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-09-22 09:50:35 -04:00

lockd: Fix Oopses due to list manipulation errors. The patch "stop abusing file_lock_list introduces a couple of bugs since the locks may be copied and need to be removed from the lists when they are destroyed. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:41 -05:00

lockd: Remove BKL from the client This patch removes all calls to lock_kernel() from the client. This patch should be applied after the "fs/lock.c prepare for BKL removal" patch submitted by Arnd Bergmann on September 18. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-09-22 09:50:35 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

const: make file_lock_operations const Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-21 17:01:11 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Fix Oopses due to list manipulation errors. The patch "stop abusing file_lock_list introduces a couple of bugs since the locks may be copied and need to be removed from the lists when they are destroyed. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:41 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM,NFSv4: Don't put UNLOCK requests on the wire unless we hold a lock Use the new behaviour of {flock,posix}_file_lock(F_UNLCK) to determine if we held a lock, and only send the RPC request to the server if this was the case. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-29 16:38:34 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Move locks API users to locks_lock_inode_wait() Instead of having users check for FL_POSIX or FL_FLOCK to call the correct locks API function, use the check within locks_lock_inode_wait(). This allows for some later cleanup. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>

2015-10-22 13:38:14 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Simplify client locks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:44 -05:00

NLM,NFSv4: Wait on local locks before we put RPC calls on the wire Use FL_ACCESS flag to test and/or wait for local locks before we try requesting a lock from the server Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-29 16:38:39 -04:00

NLM/lockd: Fix a race when cancelling a blocking lock We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 20:26:22 -04:00

NLM: Simplify client locks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:44 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Remove redundant printk() in nlmclnt_lock() The nsm_monitor() function already generates a printk(KERN_NOTICE) if the SM_MON upcall fails, so the similar printk() in the nlmclnt_lock() function is redundant. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

2008-12-04 14:21:01 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Update NSM state from SM_MON replies When rpc.statd starts up in user space at boot time, it attempts to write the latest NSM local state number into /proc/sys/fs/nfs/nsm_local_state. If lockd.ko isn't loaded yet (as is the case in most configurations), that file doesn't exist, thus the kernel's NSM state remains set to its initial value of zero during lockd operation. This is a problem because rpc.statd and lockd use the NSM state number to prevent repeated lock recovery on rebooted hosts. If lockd sends a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state number is received, there is no way for lockd or rpc.statd to distinguish that stale SM_NOTIFY from an actual reboot. Thus lock recovery could be performed after the rebooted host has already started reclaiming locks, and those locks will be lost. We could change /etc/init.d/nfslock so it always modprobes lockd.ko before starting rpc.statd. However, if lockd.ko is ever unloaded and reloaded, we are back at square one, since the NSM state is not preserved across an unload/reload cycle. This may happen frequently on clients that use automounter. A period of NFS inactivity causes lockd.ko to be unloaded, and the kernel loses its NSM state setting. Instead, let's use the fact that rpc.statd plants the local system's NSM state in every SM_MON (and SM_UNMON) reply. lockd performs a synchronous SM_MON upcall to the local rpc.statd _before_ sending its first NLM request to a new remote. This would permit rpc.statd to provide the current NSM state to lockd, even after lockd.ko had been unloaded and reloaded. Note that NLMPROC_LOCK arguments are constructed before the nsm_monitor() call, so we have to rearrange argument construction very slightly to make this all work out. And, the kernel appears to treat NSM state as a u32 (see struct nlm_args and nsm_res). Make nsm_local_state a u32 as well, to ensure we don't get bogus comparison results. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2009-06-17 18:02:10 -07:00

NLM: Remove redundant printk() in nlmclnt_lock() The nsm_monitor() function already generates a printk(KERN_NOTICE) if the SM_MON upcall fails, so the similar printk() in the nlmclnt_lock() function is redundant. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

2008-12-04 14:21:01 -05:00

NLM,NFSv4: Wait on local locks before we put RPC calls on the wire Use FL_ACCESS flag to test and/or wait for local locks before we try requesting a lock from the server Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-29 16:38:39 -04:00

NLM/lockd: Ensure we don't corrupt fl->fl_flags in nlmclnt_unlock() Also fix up nlmclnt_lock() so that it doesn't pass modified versions of fl->fl_flags to nlmclnt_cancel() and other helpers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 18:57:06 -04:00

NLM,NFSv4: Wait on local locks before we put RPC calls on the wire Use FL_ACCESS flag to test and/or wait for local locks before we try requesting a lock from the server Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-29 16:38:39 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Simplify client locks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:44 -05:00

NLM: Fix reclaim races Currently it is possible for a task to remove its locks at the same time as the NLM recovery thread is trying to recover them. This quickly leads to an Oops. Protect the locks using an rw semaphore while they are being recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-09 09:40:27 -04:00

NLM/lockd: Fix a race when cancelling a blocking lock We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 20:26:22 -04:00

[PATCH] NLM: fix a client-side race on blocking locks. If the lock blocks, the server may send us a GRANTED message that races with the reply to our LOCK request. Make sure that we catch the GRANTED by queueing up our request on the nlm_blocked list before we send off the first LOCK rpc call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-06-22 17:16:31 +00:00

NLM: Fix reclaim races Currently it is possible for a task to remove its locks at the same time as the NLM recovery thread is trying to recover them. This quickly leads to an Oops. Protect the locks using an rw semaphore while they are being recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-09 09:40:27 -04:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

[PATCH] NLM: fix a client-side race on blocking locks. If the lock blocks, the server may send us a GRANTED message that races with the reply to our LOCK request. Make sure that we catch the GRANTED by queueing up our request on the nlm_blocked list before we send off the first LOCK rpc call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-06-22 17:16:31 +00:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

[PATCH] NLM: fix a client-side race on blocking locks. If the lock blocks, the server may send us a GRANTED message that races with the reply to our LOCK request. Make sure that we catch the GRANTED by queueing up our request on the nlm_blocked list before we send off the first LOCK rpc call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-06-22 17:16:31 +00:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

[PATCH] NLM: fix a client-side race on blocking locks. If the lock blocks, the server may send us a GRANTED message that races with the reply to our LOCK request. Make sure that we catch the GRANTED by queueing up our request on the nlm_blocked list before we send off the first LOCK rpc call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-06-22 17:16:31 +00:00

NLM: Simplify client locks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:44 -05:00

NLM/lockd: Fix a race when cancelling a blocking lock We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 20:26:22 -04:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

NLM: Simplify client locks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:44 -05:00

[PATCH] NLM: fix a client-side race on blocking locks. If the lock blocks, the server may send us a GRANTED message that races with the reply to our LOCK request. Make sure that we catch the GRANTED by queueing up our request on the nlm_blocked list before we send off the first LOCK rpc call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-06-22 17:16:31 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Fix a race when cancelling a blocking lock We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 20:26:22 -04:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

NLM: Fix reclaim races Currently it is possible for a task to remove its locks at the same time as the NLM recovery thread is trying to recover them. This quickly leads to an Oops. Protect the locks using an rw semaphore while they are being recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-09 09:40:27 -04:00

lockd: Fix Oopses due to list manipulation errors. The patch "stop abusing file_lock_list introduces a couple of bugs since the locks may be copied and need to be removed from the lists when they are destroyed. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:41 -05:00

NLM/lockd: Ensure we don't corrupt fl->fl_flags in nlmclnt_unlock() Also fix up nlmclnt_lock() so that it doesn't pass modified versions of fl->fl_flags to nlmclnt_cancel() and other helpers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 18:57:06 -04:00

NLM,NFSv4: Don't put UNLOCK requests on the wire unless we hold a lock Use the new behaviour of {flock,posix}_file_lock(F_UNLCK) to determine if we held a lock, and only send the RPC request to the server if this was the case. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-29 16:38:34 -04:00

fs: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:55:09 -07:00

NLM: Fix reclaim races Currently it is possible for a task to remove its locks at the same time as the NLM recovery thread is trying to recover them. This quickly leads to an Oops. Protect the locks using an rw semaphore while they are being recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-09 09:40:27 -04:00

NLM/lockd: Ensure we don't corrupt fl->fl_flags in nlmclnt_unlock() Also fix up nlmclnt_lock() so that it doesn't pass modified versions of fl->fl_flags to nlmclnt_cancel() and other helpers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 18:57:06 -04:00

NLM/lockd: Fix a race when cancelling a blocking lock We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 20:26:22 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Fix a race when cancelling a blocking lock We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 20:26:22 -04:00

lockd: dont return EAGAIN for a permanent error Fix nlm_fopen() to return NLM_FAILED (or NLM_LCK_DENIED_NOLOCKS) instead of NLM_LCK_DENIED. The latter means the lock request failed because of a conflicting lock (i.e. a temporary error), which is wrong in this case. Also fix the client to return ENOLCK instead of EAGAIN if a blocking lock request returns with NLM_LOCK_DENIED. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: David Teigland <teigland@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-25 01:48:55 -07:00

[PATCH] NLM: fix a client-side race on blocking locks. If the lock blocks, the server may send us a GRANTED message that races with the reply to our LOCK request. Make sure that we catch the GRANTED by queueing up our request on the nlm_blocked list before we send off the first LOCK rpc call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-06-22 17:16:31 +00:00

NLM: Simplify client locks Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:44 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Split nlm_release_call() The nlm_release_call() function is invoked from both the server and the client side. We're about to introduce a distinct server- and client-side nlm_release_host(), so nlm_release_call() must first be split into a client-side and a server-side version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-12-14 15:05:42 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Fix a race when cancelling a blocking lock We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 20:26:22 -04:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

NLM/lockd: Fix a race when cancelling a blocking lock We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 20:26:22 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: nlmclnt_reclaim(): avoid stack overflow Even though nlmclnt_reclaim() is only one call into the stack frame, 928 bytes on the stack seems like a lot. Recode to dynamically allocate the request structure once from within the reclaimer task, then pass this pointer into nlmclnt_reclaim() for reuse on subsequent calls. smatch analysis: fs/lockd/clntproc.c:620 nlmclnt_reclaim() warn: 'reqst' puts 928 bytes on stack Also remove redundant assignment of 0 after memset. Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>

2013-02-13 08:40:16 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Fix reclaim races Currently it is possible for a task to remove its locks at the same time as the NLM recovery thread is trying to recover them. This quickly leads to an Oops. Protect the locks using an rw semaphore while they are being recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-09 09:40:27 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Ensure we don't corrupt fl->fl_flags in nlmclnt_unlock() Also fix up nlmclnt_lock() so that it doesn't pass modified versions of fl->fl_flags to nlmclnt_cancel() and other helpers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 18:57:06 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] NLM: Ensure we do not Oops in the case of an unlock In theory, NLM specs assure us that the server will only reply LCK_GRANTED or LCK_DENIED_GRACE_PERIOD to our NLM_UNLOCK request. In practice, we should not assume this to be the case, and the code will currently Oops if we do. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-13 21:20:49 -08:00

NLM,NFSv4: Don't put UNLOCK requests on the wire unless we hold a lock Use the new behaviour of {flock,posix}_file_lock(F_UNLCK) to determine if we held a lock, and only send the RPC request to the server if this was the case. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-29 16:38:34 -04:00

NLM: Fix reclaim races Currently it is possible for a task to remove its locks at the same time as the NLM recovery thread is trying to recover them. This quickly leads to an Oops. Protect the locks using an rw semaphore while they are being recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-09 09:40:27 -04:00

NLM/lockd: Ensure we don't corrupt fl->fl_flags in nlmclnt_unlock() Also fix up nlmclnt_lock() so that it doesn't pass modified versions of fl->fl_flags to nlmclnt_cancel() and other helpers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-01 18:57:06 -04:00

NLM,NFSv4: Don't put UNLOCK requests on the wire unless we hold a lock Use the new behaviour of {flock,posix}_file_lock(F_UNLCK) to determine if we held a lock, and only send the RPC request to the server if this was the case. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-06-29 16:38:34 -04:00

[PATCH] NLM: Ensure we do not Oops in the case of an unlock In theory, NLM specs assure us that the server will only reply LCK_GRANTED or LCK_DENIED_GRACE_PERIOD to our NLM_UNLOCK request. In practice, we should not assume this to be the case, and the code will currently Oops if we do. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-13 21:20:49 -08:00

lockd: convert nlm_rqst.a_count from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nlm_rqst.a_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the nlm_rqst.a_count it might make a difference in following places: - nlmclnt_release_call() and nlmsvc_release_call(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-11-29 13:15:46 +02:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

lockd: properly convert be32 values in debug messages lockd: server returns status 50331648 it's quite hard to understand that number in this message is 3 in big endian Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2011-06-01 16:54:32 +04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

lockd: Split nlm_release_call() The nlm_release_call() function is invoked from both the server and the client side. We're about to introduce a distinct server- and client-side nlm_release_host(), so nlm_release_call() must first be split into a client-side and a server-side version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-12-14 15:05:42 +00:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Don't hang forever on NLM unlock requests If the NLM daemon is killed on the NFS server, we can currently end up hanging forever on an 'unlock' request, instead of aborting. Basically, if the rpcbind request fails, or the server keeps returning garbage, we really want to quit instead of retrying. Tested-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org

2011-05-31 15:15:34 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

lockd: Introduce nlmclnt_operations NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-04-11 12:50:11 -04:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Fix arguments to NLM_CANCEL call The OpenGroup docs state that the arguments "block", "exclusive" and "alock" must exactly match the arguments for the lock call that we are trying to cancel. Currently, "block" is always set to false, which is wrong. See bug# 5956 on bugzilla.kernel.org. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-02-01 12:18:22 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call Currently, it returns success as long as the RPC call was sent. We'd like to know if the CANCEL operation succeeded on the server. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:40:53 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: shift grabbing a reference to nlm_host into nlm_alloc_call() It's used both for client and server hosts; we can't do nlmclnt_release_host() on failure exits, since the host might need nlmsvc_release_host(), with BUG_ON() for calling the wrong one. Makes life simpler for callers, actually... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

2012-07-26 00:39:50 +04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Fix arguments to NLM_CANCEL call The OpenGroup docs state that the arguments "block", "exclusive" and "alock" must exactly match the arguments for the lock call that we are trying to cancel. Currently, "block" is always set to false, which is wrong. See bug# 5956 on bugzilla.kernel.org. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-02-01 12:18:22 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: convert nlm_rqst.a_count from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nlm_rqst.a_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the nlm_rqst.a_count it might make a difference in following places: - nlmclnt_release_call() and nlmsvc_release_call(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

2017-11-29 13:15:46 +02:00

NLM/lockd: Ensure client locking calls use correct credentials Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:44:05 -04:00

NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call Currently, it returns success as long as the RPC call was sent. We'd like to know if the CANCEL operation succeeded on the server. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:40:53 -04:00

lockd: Split nlm_release_call() The nlm_release_call() function is invoked from both the server and the client side. We're about to introduce a distinct server- and client-side nlm_release_host(), so nlm_release_call() must first be split into a client-side and a server-side version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2010-12-14 15:05:42 +00:00

NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call Currently, it returns success as long as the RPC call was sent. We'd like to know if the CANCEL operation succeeded on the server. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2008-04-02 14:40:53 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: fix print format for tk_pid The tk_pid field is an unsigned short. The proper print format specifier for that type is %5u, not %4d. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-12-05 16:36:03 -05:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: nlmclnt_cancel_callback should accept NLM_LCK_DENIED errors NLM_LCK_DENIED is a valid error return for an NLM_CANCEL call by the client. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:41 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

NLM: Ensure that nlmclnt_cancel_callback() doesn't loop forever If the server returns NLM_LCK_DENIED_NOLOCKS, we currently retry the entire NLM_CANCEL request. This may end up looping forever unless the server changes its mind (why would it do that, though?). Ensure that we limit the number of retries (to 3). See bug# 5957 in bugzilla.kernel.org. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-02-01 12:18:25 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

NLM: Add nlmclnt_release_call Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-03-20 13:44:45 -05:00

RPC: Clean up RPC task structure Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2006-01-03 09:55:04 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-13 00:35:03 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lockd: properly convert be32 values in debug messages lockd: server returns status 50331648 it's quite hard to understand that number in this message is 3 in big endian Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2011-06-01 16:54:32 +04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

862 lines 22 KiB Raw Permalink Normal View History

862 lines

22 KiB

Raw Permalink Normal View History