kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-14 05:55:17 +00:00
Code Issues Releases Packages Activity
linux/crypto/blkcipher.c

559 lines
15 KiB
Raw Permalink Normal View History

[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: Replaced gcc specific attributes with macros from compiler.h Continuing from this commit: 52f5684c8e1e ("kernel: use macros from compiler.h instead of __attribute__((...))") I submitted 4 total patches. They are part of task I've taken up to increase compiler portability in the kernel. I've cleaned up the subsystems under /kernel /mm /block and /security, this patch targets /crypto. There is <linux/compiler.h> which provides macros for various gcc specific constructs. Eg: __weak for __attribute__((weak)). I've cleaned all instances of gcc specific attributes with the right macros for the crypto subsystem. I had to make one additional change into compiler-gcc.h for the case when one wants to use this: __attribute__((aligned) and not specify an alignment factor. From the gcc docs, this will result in the largest alignment for that data type on the target machine so I've named the macro __aligned_largest. Please advise if another name is more appropriate. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-31 21:26:23 +05:30
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: Replaced gcc specific attributes with macros from compiler.h Continuing from this commit: 52f5684c8e1e ("kernel: use macros from compiler.h instead of __attribute__((...))") I submitted 4 total patches. They are part of task I've taken up to increase compiler portability in the kernel. I've cleaned up the subsystems under /kernel /mm /block and /security, this patch targets /crypto. There is <linux/compiler.h> which provides macros for various gcc specific constructs. Eg: __weak for __attribute__((weak)). I've cleaned all instances of gcc specific attributes with the right macros for the crypto subsystem. I had to make one additional change into compiler-gcc.h for the case when one wants to use this: __attribute__((aligned) and not specify an alignment factor. From the gcc docs, this will result in the largest alignment for that data type on the target machine so I've named the macro __aligned_largest. Please advise if another name is more appropriate. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-31 21:26:23 +05:30
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - Include crypto/aead.h All users of AEAD should include crypto/aead.h instead of include/linux/crypto.h. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-11 17:47:49 +08:00
[CRYPTO] skcipher: Add skcipher_geniv_alloc/skcipher_geniv_free This patch creates the infrastructure to help the construction of givcipher templates that wrap around existing blkcipher/ablkcipher algorithms by adding an IV generator to them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-05 21:08:36 +11:00
[CRYPTO] scatterwalk: Move scatterwalk.h to linux/crypto The scatterwalk infrastructure is used by algorithms so it needs to move out of crypto for future users that may live in drivers/crypto or asm/*/crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-07 18:52:49 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: Add userspace report for blkcipher type algorithms Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-27 07:41:54 +02:00
crypto: Replaced gcc specific attributes with macros from compiler.h Continuing from this commit: 52f5684c8e1e ("kernel: use macros from compiler.h instead of __attribute__((...))") I submitted 4 total patches. They are part of task I've taken up to increase compiler portability in the kernel. I've cleaned up the subsystems under /kernel /mm /block and /security, this patch targets /crypto. There is <linux/compiler.h> which provides macros for various gcc specific constructs. Eg: __weak for __attribute__((weak)). I've cleaned all instances of gcc specific attributes with the right macros for the crypto subsystem. I had to make one additional change into compiler-gcc.h for the case when one wants to use this: __attribute__((aligned) and not specify an alignment factor. From the gcc docs, this will result in the largest alignment for that data type on the target machine so I've named the macro __aligned_largest. Please advise if another name is more appropriate. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-31 21:26:23 +05:30
crypto: Add userspace report for blkcipher type algorithms Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-27 07:41:54 +02:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove the second argument of k[un]map_atomic() Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-25 23:14:17 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove the second argument of k[un]map_atomic() Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-25 23:14:17 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove the second argument of k[un]map_atomic() Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-25 23:14:17 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove the second argument of k[un]map_atomic() Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-25 23:14:17 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] blkcipher: Fix handling of kmalloc page straddling The function blkcipher_get_spot tries to return a buffer of the specified length that does not straddle a page. It has an off-by-one bug so it may advance a page unnecessarily. What's worse, one of its callers doesn't provide a buffer that's sufficiently long for this operation. This patch fixes both problems. Thanks to Bob Gilligan for diagnosing this problem and providing a fix. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-09 08:45:21 +01:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] blkcipher: Fix handling of kmalloc page straddling The function blkcipher_get_spot tries to return a buffer of the specified length that does not straddle a page. It has an off-by-one bug so it may advance a page unnecessarily. What's worse, one of its callers doesn't provide a buffer that's sufficiently long for this operation. This patch fixes both problems. Thanks to Bob Gilligan for diagnosing this problem and providing a fix. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-09 08:45:21 +01:00
[CRYPTO] blkcipher: Use max() in blkcipher_get_spot() to state the intention Use max in blkcipher_get_spot() instead of open coding it. Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-19 19:11:41 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
mm: strictly nested kmap_atomic() Ensure kmap_atomic() usage is strictly nested Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 14:21:47 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: blkcipher - fix crash flushing dcache in error path Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by: Liu Chao <liuchao741@huawei.com> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> # v2.6.19+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-23 10:54:57 -07:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] blkcipher: Remove alignment restriction on block size Previously we assumed for convenience that the block size is a multiple of the algorithm's required alignment. With the pending addition of CTR this will no longer be the case as the block size will be 1 due to it being a stream cipher. However, the alignment requirement will be that of the underlying implementation which will most likely be greater than 1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-29 21:24:23 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] blkcipher: Increase kmalloc amount to aligned block size Now that the block size is no longer a multiple of the alignment, we need to increase the kmalloc amount in blkcipher_next_slow to use the aligned block size. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-04 14:49:00 +08:00
[CRYPTO] blkcipher: Fix handling of kmalloc page straddling The function blkcipher_get_spot tries to return a buffer of the specified length that does not straddle a page. It has an off-by-one bug so it may advance a page unnecessarily. What's worse, one of its callers doesn't provide a buffer that's sufficiently long for this operation. This patch fixes both problems. Thanks to Bob Gilligan for diagnosing this problem and providing a fix. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-09 08:45:21 +01:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] blkcipher: Remove alignment restriction on block size Previously we assumed for convenience that the block size is a multiple of the algorithm's required alignment. With the pending addition of CTR this will no longer be the case as the block size will be 1 due to it being a stream cipher. However, the alignment requirement will be that of the underlying implementation which will most likely be greater than 1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-29 21:24:23 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] blkcipher: Added blkcipher_walk_virt_block This patch adds the helper blkcipher_walk_virt_block which is similar to blkcipher_walk_virt but uses a supplied block size instead of the block size of the block cipher. This is useful for CTR where the block size is 1 but we still want to walk by the block size of the underlying cipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-04 15:24:05 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: skcipher - Fix blkcipher walk OOM crash When we need to allocate a temporary blkcipher_walk_next and it fails, the code is supposed to take the slow path of processing the data block by block. However, due to an unrelated change we instead end up dereferencing the NULL pointer. This patch fixes it by moving the unrelated bsize setting out of the way so that we enter the slow path as inteded. Fixes: 7607bd8ff03b ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block") Cc: stable@vger.kernel.org Reported-by: xiakaixu <xiakaixu@huawei.com> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2016-09-13 14:43:29 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] blkcipher: Remove alignment restriction on block size Previously we assumed for convenience that the block size is a multiple of the algorithm's required alignment. With the pending addition of CTR this will no longer be the case as the block size will be 1 due to it being a stream cipher. However, the alignment requirement will be that of the underlying implementation which will most likely be greater than 1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-29 21:24:23 +08:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] all: Check for usage in hard IRQ context Using blkcipher/hash crypto operations in hard IRQ context can lead to random memory corruption due to the reuse of kmap_atomic slots. Since crypto operations were never meant to be used in hard IRQ contexts, this patch checks for such usage and returns an error before kmap_atomic is performed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-12-10 10:45:28 +11:00
crypto: skcipher - Copy iv from desc even for 0-len walks Some ciphers actually support encrypting zero length plaintexts. For example, many AEAD modes support this. The resulting ciphertext for those winds up being only the authentication tag, which is a result of the key, the iv, the additional data, and the fact that the plaintext had zero length. The blkcipher constructors won't copy the IV to the right place, however, when using a zero length input, resulting in some significant problems when ciphers call their initialization routines, only to find that the ->iv parameter is uninitialized. One such example of this would be using chacha20poly1305 with a zero length input, which then calls chacha20, which calls the key setup routine, which eventually OOPSes due to the uninitialized ->iv member. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-12-06 02:51:37 +01:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] blkcipher: Added blkcipher_walk_virt_block This patch adds the helper blkcipher_walk_virt_block which is similar to blkcipher_walk_virt but uses a supplied block size instead of the block size of the block cipher. This is useful for CTR where the block size is 1 but we still want to walk by the block size of the underlying cipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-04 15:24:05 +08:00
crypto: remove direct blkcipher_walk dependency on transform In order to allow other uses of the blkcipher walk API than the blkcipher algos themselves, this patch copies some of the transform data members to the walk struct so the transform is only accessed at walk init time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:38 +08:00
[CRYPTO] blkcipher: Added blkcipher_walk_virt_block This patch adds the helper blkcipher_walk_virt_block which is similar to blkcipher_walk_virt but uses a supplied block size instead of the block size of the block cipher. This is useful for CTR where the block size is 1 but we still want to walk by the block size of the underlying cipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-04 15:24:05 +08:00
crypto: allow blkcipher walks over AEAD data This adds the function blkcipher_aead_walk_virt_block, which allows the caller to use the blkcipher walk API to handle the input and output scatterlists. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-04 13:28:39 +08:00
[CRYPTO] api: Add missing headers for setkey_unaligned This patch ensures that kernel.h and slab.h are included for the setkey_unaligned function. It also breaks a couple of long lines. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-23 16:23:01 +08:00
[CRYPTO] api: Handle unaligned keys in setkey setkey() in {cipher,blkcipher,ablkcipher,hash}.c does not respect the requested alignment by the algorithm. This patch fixes it. The extra memory is allocated by kmalloc() with GFP_ATOMIC flag. Signed-off-by: Sebastian Siewior <linux-crypto@ml.breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-19 19:51:21 +10:00
[CRYPTO] api: fix writting into unallocated memory in setkey_aligned setkey_unaligned() commited in ca7c39385ce1a7b44894a4b225a4608624e90730 overwrites unallocated memory in the following memset() because I used the wrong buffer length. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-03 20:33:47 +08:00
[CRYPTO] api: Handle unaligned keys in setkey setkey() in {cipher,blkcipher,ablkcipher,hash}.c does not respect the requested alignment by the algorithm. This patch fixes it. The extra memory is allocated by kmalloc() with GFP_ATOMIC flag. Signed-off-by: Sebastian Siewior <linux-crypto@ml.breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-19 19:51:21 +10:00
[CRYPTO] api: Add missing headers for setkey_unaligned This patch ensures that kernel.h and slab.h are included for the setkey_unaligned function. It also breaks a couple of long lines. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-23 16:23:01 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] api: Handle unaligned keys in setkey setkey() in {cipher,blkcipher,ablkcipher,hash}.c does not respect the requested alignment by the algorithm. This patch fixes it. The extra memory is allocated by kmalloc() with GFP_ATOMIC flag. Signed-off-by: Sebastian Siewior <linux-crypto@ml.breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-19 19:51:21 +10:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] api: Handle unaligned keys in setkey setkey() in {cipher,blkcipher,ablkcipher,hash}.c does not respect the requested alignment by the algorithm. This patch fixes it. The extra memory is allocated by kmalloc() with GFP_ATOMIC flag. Signed-off-by: Sebastian Siewior <linux-crypto@ml.breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-19 19:51:21 +10:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] api: Add async block cipher interface This patch adds the frontend interface for asynchronous block ciphers. In addition to the usual block cipher parameters, there is a callback function pointer and a data pointer. The callback will be invoked only if the encrypt/decrypt handlers return -EINPROGRESS. In other words, if the return value of zero the completion handler (or the equivalent code) needs to be invoked by the caller. The request structure is allocated and freed by the caller. Its size is determined by calling crypto_ablkcipher_reqsize(). The helpers ablkcipher_request_alloc/ablkcipher_request_free can be used to manage the memory for a request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-03-24 14:35:34 +11:00
[CRYPTO] api: Allow multiple frontends per backend This patch adds support for multiple frontend types for each backend algorithm by passing the type and mask through to the backend type init function. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-01-24 20:50:26 +11:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] ablkcipher: Add distinct ABLKCIPHER type Up until now we have ablkcipher algorithms have been identified as type BLKCIPHER with the ASYNC bit set. This is suboptimal because ablkcipher refers to two things. On the one hand it refers to the top-level ablkcipher interface with requests. On the other hand it refers to and algorithm type underneath. As it is you cannot request a synchronous block cipher algorithm with the ablkcipher interface on top. This is a problem because we want to be able to eventually phase out the blkcipher top-level interface. This patch fixes this by making ABLKCIPHER its own type, just as we have distinct types for HASH and DIGEST. The type it associated with the algorithm implementation only. Which top-level interface is used for synchronous block ciphers is then determined by the mask that's used. If it's a specific mask then the old blkcipher interface is given, otherwise we go with the new ablkcipher interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-15 22:36:07 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] api: Add async block cipher interface This patch adds the frontend interface for asynchronous block ciphers. In addition to the usual block cipher parameters, there is a callback function pointer and a data pointer. The callback will be invoked only if the encrypt/decrypt handlers return -EINPROGRESS. In other words, if the return value of zero the completion handler (or the equivalent code) needs to be invoked by the caller. The request structure is allocated and freed by the caller. Its size is determined by calling crypto_ablkcipher_reqsize(). The helpers ablkcipher_request_alloc/ablkcipher_request_free can be used to manage the memory for a request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-03-24 14:35:34 +11:00
[CRYPTO] skcipher: Add skcipher_geniv_alloc/skcipher_geniv_free This patch creates the infrastructure to help the construction of givcipher templates that wrap around existing blkcipher/ablkcipher algorithms by adding an IV generator to them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-05 21:08:36 +11:00
[CRYPTO] api: Add async block cipher interface This patch adds the frontend interface for asynchronous block ciphers. In addition to the usual block cipher parameters, there is a callback function pointer and a data pointer. The callback will be invoked only if the encrypt/decrypt handlers return -EINPROGRESS. In other words, if the return value of zero the completion handler (or the equivalent code) needs to be invoked by the caller. The request structure is allocated and freed by the caller. Its size is determined by calling crypto_ablkcipher_reqsize(). The helpers ablkcipher_request_alloc/ablkcipher_request_free can be used to manage the memory for a request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-03-24 14:35:34 +11:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] api: Add async block cipher interface This patch adds the frontend interface for asynchronous block ciphers. In addition to the usual block cipher parameters, there is a callback function pointer and a data pointer. The callback will be invoked only if the encrypt/decrypt handlers return -EINPROGRESS. In other words, if the return value of zero the completion handler (or the equivalent code) needs to be invoked by the caller. The request structure is allocated and freed by the caller. Its size is determined by calling crypto_ablkcipher_reqsize(). The helpers ablkcipher_request_alloc/ablkcipher_request_free can be used to manage the memory for a request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-03-24 14:35:34 +11:00
[CRYPTO] ablkcipher: Add distinct ABLKCIPHER type Up until now we have ablkcipher algorithms have been identified as type BLKCIPHER with the ASYNC bit set. This is suboptimal because ablkcipher refers to two things. On the one hand it refers to the top-level ablkcipher interface with requests. On the other hand it refers to and algorithm type underneath. As it is you cannot request a synchronous block cipher algorithm with the ablkcipher interface on top. This is a problem because we want to be able to eventually phase out the blkcipher top-level interface. This patch fixes this by making ABLKCIPHER its own type, just as we have distinct types for HASH and DIGEST. The type it associated with the algorithm implementation only. Which top-level interface is used for synchronous block ciphers is then determined by the mask that's used. If it's a specific mask then the old blkcipher interface is given, otherwise we go with the new ablkcipher interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-15 22:36:07 +08:00
[CRYPTO] api: Add async block cipher interface This patch adds the frontend interface for asynchronous block ciphers. In addition to the usual block cipher parameters, there is a callback function pointer and a data pointer. The callback will be invoked only if the encrypt/decrypt handlers return -EINPROGRESS. In other words, if the return value of zero the completion handler (or the equivalent code) needs to be invoked by the caller. The request structure is allocated and freed by the caller. Its size is determined by calling crypto_ablkcipher_reqsize(). The helpers ablkcipher_request_alloc/ablkcipher_request_free can be used to manage the memory for a request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-03-24 14:35:34 +11:00
crypto: algapi - Fix build problem with NET disabled The report functions use NLA_PUT so we need to ensure that NET is enabled. Reported-by: Luis Henriques <henrix@camandro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-03 23:46:07 +11:00
crypto: Add userspace report for blkcipher type algorithms Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-27 07:41:54 +02:00
crypto: user - fix info leaks in report API Three errors resulting in kernel memory disclosure: 1/ The structures used for the netlink based crypto algorithm report API are located on the stack. As snprintf() does not fill the remainder of the buffer with null bytes, those stack bytes will be disclosed to users of the API. Switch to strncpy() to fix this. 2/ crypto_report_one() does not initialize all field of struct crypto_user_alg. Fix this to fix the heap info leak. 3/ For the module name we should copy only as many bytes as module_name() returns -- not as much as the destination buffer could hold. But the current code does not and therefore copies random data from behind the end of the module name, as the module name is always shorter than CRYPTO_MAX_ALG_NAME. Also switch to use strncpy() to copy the algorithm's name and driver_name. They are strings, after all. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-02-05 18:19:13 +01:00
crypto: skcipher - Fix -Wstringop-truncation warnings As of GCC 9.0.0 the build is reporting warnings like: crypto/ablkcipher.c: In function ‘crypto_ablkcipher_report’: crypto/ablkcipher.c:374:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation] strncpy(rblkcipher.geniv, alg->cra_ablkcipher.geniv ?: "<default>", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(rblkcipher.geniv)); ~~~~~~~~~~~~~~~~~~~~~~~~~ This means the strnycpy might create a non null terminated string. Fix this by explicitly performing '\0' termination. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-06-25 21:45:37 +09:00
crypto: Add userspace report for blkcipher type algorithms Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-27 07:41:54 +02:00
crypto: Stop using NLA_PUT*(). These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 20:19:05 -04:00
crypto: Add userspace report for blkcipher type algorithms Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-27 07:41:54 +02:00
crypto: algapi - Fix build problem with NET disabled The report functions use NLA_PUT so we need to ensure that NET is enabled. Reported-by: Luis Henriques <henrix@camandro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-03 23:46:07 +11:00
crypto: Add userspace report for blkcipher type algorithms Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-27 07:41:54 +02:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: Replaced gcc specific attributes with macros from compiler.h Continuing from this commit: 52f5684c8e1e ("kernel: use macros from compiler.h instead of __attribute__((...))") I submitted 4 total patches. They are part of task I've taken up to increase compiler portability in the kernel. I've cleaned up the subsystems under /kernel /mm /block and /security, this patch targets /crypto. There is <linux/compiler.h> which provides macros for various gcc specific constructs. Eg: __weak for __attribute__((weak)). I've cleaned all instances of gcc specific attributes with the right macros for the crypto subsystem. I had to make one additional change into compiler-gcc.h for the case when one wants to use this: __attribute__((aligned) and not specify an alignment factor. From the gcc docs, this will result in the largest alignment for that data type on the target machine so I've named the macro __aligned_largest. Please advise if another name is more appropriate. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-31 21:26:23 +05:30
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
[CRYPTO] skcipher: Added geniv field This patch introduces the geniv field which indicates the default IV generator for each algorithm. It should point to a string that is not freed as long as the algorithm is registered. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-27 21:33:24 +08:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00
crypto: Add userspace report for blkcipher type algorithms Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-27 07:41:54 +02:00
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 00:07:53 +10:00