kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/net/wireless/trace.h

2827 lines
77 KiB
Raw Permalink Normal View History

cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
wireless: Use eth_<foo>_addr instead of memset Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 19:54:58 -08:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
wireless: Use eth_<foo>_addr instead of memset Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 19:54:58 -08:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: fix wdev tracing crash Arend reported a crash in tracing if the driver returns an ERR_PTR() value from the add_virtual_intf() callback. This is due to the tracing then still attempting to dereference the "pointer", fix this by using IS_ERR_OR_NULL(). Reported-by: Arend van Spriel <arend@broadcom.com> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-19 20:26:57 +01:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
nl80211/cfg80211: support VHT channel configuration Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 23:14:50 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
nl80211/cfg80211: support VHT channel configuration Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 23:14:50 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
nl80211/cfg80211: support VHT channel configuration Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 23:14:50 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
nl80211/cfg80211: support VHT channel configuration Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 23:14:50 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
nl80211/cfg80211: support VHT channel configuration Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 23:14:50 +01:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
nl80211/cfg80211: support VHT channel configuration Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 23:14:50 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: Add support for QoS mapping This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 23:01:30 -08:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: 802.11p OCB mode handling This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-03 10:33:18 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add vlan to station add/change tracing This helps debug issues with VLAN modifications that are otherwise not really visible in any tracing/debugging. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 19:56:41 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add vlan to station add/change tracing This helps debug issues with VLAN modifications that are otherwise not really visible in any tracing/debugging. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 19:56:41 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add vlan to station add/change tracing This helps debug issues with VLAN modifications that are otherwise not really visible in any tracing/debugging. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 19:56:41 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add vlan to station add/change tracing This helps debug issues with VLAN modifications that are otherwise not really visible in any tracing/debugging. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 19:56:41 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: Convert del_station() callback to use a param struct This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-10 20:52:40 +03:00
cfg80211: Specify frame and reason code for NL80211_CMD_DEL_STATION The optional NL80211_ATTR_MGMT_SUBTYPE and NL80211_ATTR_REASON_CODE attributes can now be included in NL80211_CMD_DEL_STATION to indicate to the driver which frame (Deauthentication/Disassociation) and reason code in that frame should be used to indicate removal to the specific station. This is used by drivers that implement AP SME and generate those frames internally. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20 13:20:45 +03:00
cfg80211: Convert del_station() callback to use a param struct This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-10 20:52:40 +03:00
cfg80211: Specify frame and reason code for NL80211_CMD_DEL_STATION The optional NL80211_ATTR_MGMT_SUBTYPE and NL80211_ATTR_REASON_CODE attributes can now be included in NL80211_CMD_DEL_STATION to indicate to the driver which frame (Deauthentication/Disassociation) and reason code in that frame should be used to indicate removal to the specific station. This is used by drivers that implement AP SME and generate those frames internally. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20 13:20:45 +03:00
cfg80211: Convert del_station() callback to use a param struct This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-10 20:52:40 +03:00
cfg80211: Specify frame and reason code for NL80211_CMD_DEL_STATION The optional NL80211_ATTR_MGMT_SUBTYPE and NL80211_ATTR_REASON_CODE attributes can now be included in NL80211_CMD_DEL_STATION to indicate to the driver which frame (Deauthentication/Disassociation) and reason code in that frame should be used to indicate removal to the specific station. This is used by drivers that implement AP SME and generate those frames internally. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20 13:20:45 +03:00
cfg80211: Convert del_station() callback to use a param struct This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-10 20:52:40 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add ops to query mesh proxy path table Add two new cfg80211 operations for querying a table with proxied mesh paths. Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-12 08:58:49 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
wireless: Use eth_<foo>_addr instead of memset Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 19:54:58 -08:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
wireless: Use eth_<foo>_addr instead of memset Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 19:54:58 -08:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
wireless: Use eth_<foo>_addr instead of memset Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 19:54:58 -08:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: 802.11p OCB mode handling This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-03 10:33:18 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: allow per interface TX power setting The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-24 10:17:18 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: allow per interface TX power setting The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-24 10:17:18 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: allow per interface TX power setting The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-24 10:17:18 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: allow per interface TX power setting The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-24 10:17:18 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: allow per interface TX power setting The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-24 10:17:18 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add wdev to testmode cmd To allow drivers to implement per-interface testmode operations more easily, pass a wdev pointer if any identification for one was given from userspace. Clean up the code a bit while at it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31 18:04:15 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add wdev to testmode cmd To allow drivers to implement per-interface testmode operations more easily, pass a wdev pointer if any identification for one was given from userspace. Clean up the code a bit while at it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31 18:04:15 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add wdev to testmode cmd To allow drivers to implement per-interface testmode operations more easily, pass a wdev pointer if any identification for one was given from userspace. Clean up the code a bit while at it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31 18:04:15 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add wdev to testmode cmd To allow drivers to implement per-interface testmode operations more easily, pass a wdev pointer if any identification for one was given from userspace. Clean up the code a bit while at it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31 18:04:15 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: Pass TDLS peer capability information in tdls_mgmt While framing the TDLS Setup Confirmation frame, the driver needs to know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the VHT/HT operation / WMM parameter elements accordingly. Supplicant determines if the TDLS peer is VHT/HT/WMM capable based on the presence of the respective IEs in the received TDLS Setup Response frame. The host driver should not need to parse the received TDLS Response frame and thus, should be able to rely on the supplicant to indicate the capability of the peer through additional flags while transmitting the TDLS Setup Confirmation frame through tdls_mgmt operations. Signed-off-by: Sunil Dutt Undekari <usdutt@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20 16:22:09 +05:30
cfg80211: pass TDLS initiator in tdls_mgmt operations The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-11 17:18:21 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass TDLS initiator in tdls_mgmt operations The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-11 17:18:21 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: Pass TDLS peer capability information in tdls_mgmt While framing the TDLS Setup Confirmation frame, the driver needs to know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the VHT/HT operation / WMM parameter elements accordingly. Supplicant determines if the TDLS peer is VHT/HT/WMM capable based on the presence of the respective IEs in the received TDLS Setup Response frame. The host driver should not need to parse the received TDLS Response frame and thus, should be able to rely on the supplicant to indicate the capability of the peer through additional flags while transmitting the TDLS Setup Confirmation frame through tdls_mgmt operations. Signed-off-by: Sunil Dutt Undekari <usdutt@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20 16:22:09 +05:30
cfg80211: pass TDLS initiator in tdls_mgmt operations The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-11 17:18:21 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: Pass TDLS peer capability information in tdls_mgmt While framing the TDLS Setup Confirmation frame, the driver needs to know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the VHT/HT operation / WMM parameter elements accordingly. Supplicant determines if the TDLS peer is VHT/HT/WMM capable based on the presence of the respective IEs in the received TDLS Setup Response frame. The host driver should not need to parse the received TDLS Response frame and thus, should be able to rely on the supplicant to indicate the capability of the peer through additional flags while transmitting the TDLS Setup Confirmation frame through tdls_mgmt operations. Signed-off-by: Sunil Dutt Undekari <usdutt@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20 16:22:09 +05:30
cfg80211: pass TDLS initiator in tdls_mgmt operations The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-11 17:18:21 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: pass TDLS initiator in tdls_mgmt operations The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-11 17:18:21 +03:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: Pass TDLS peer capability information in tdls_mgmt While framing the TDLS Setup Confirmation frame, the driver needs to know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the VHT/HT operation / WMM parameter elements accordingly. Supplicant determines if the TDLS peer is VHT/HT/WMM capable based on the presence of the respective IEs in the received TDLS Setup Response frame. The host driver should not need to parse the received TDLS Response frame and thus, should be able to rely on the supplicant to indicate the capability of the peer through additional flags while transmitting the TDLS Setup Confirmation frame through tdls_mgmt operations. Signed-off-by: Sunil Dutt Undekari <usdutt@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20 16:22:09 +05:30
cfg80211: pass TDLS initiator in tdls_mgmt operations The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-11 17:18:21 +03:00
cfg80211: Pass TDLS peer capability information in tdls_mgmt While framing the TDLS Setup Confirmation frame, the driver needs to know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the VHT/HT operation / WMM parameter elements accordingly. Supplicant determines if the TDLS peer is VHT/HT/WMM capable based on the presence of the respective IEs in the received TDLS Setup Response frame. The host driver should not need to parse the received TDLS Response frame and thus, should be able to rely on the supplicant to indicate the capability of the peer through additional flags while transmitting the TDLS Setup Confirmation frame through tdls_mgmt operations. Signed-off-by: Sunil Dutt Undekari <usdutt@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20 16:22:09 +05:30
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: remove "channel" from survey names All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-14 16:35:34 +01:00
cfg80211: add scan time to survey data Add the time spent scanning to the survey data so it can be reported by drivers that collect such information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-14 16:44:11 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: remove "channel" from survey names All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-14 16:35:34 +01:00
cfg80211: add scan time to survey data Add the time spent scanning to the survey data so it can be reported by drivers that collect such information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-14 16:44:11 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add scan time to survey data Add the time spent scanning to the survey data so it can be reported by drivers that collect such information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-14 16:44:11 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: remove "channel" from survey names All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-14 16:35:34 +01:00
cfg80211: add scan time to survey data Add the time spent scanning to the survey data so it can be reported by drivers that collect such information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-14 16:44:11 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: aggregate mgmt_tx parameters into a struct Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-18 19:06:49 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: aggregate mgmt_tx parameters into a struct Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-18 19:06:49 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00
cfg80211: add tracing for P2P Device start/stop These were missed due to the tracing work having started on a kernel that didn't have P2P Device yet, implement them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-23 15:16:50 +02:00
cfg80211/nl80211: add API for MAC address ACLs Add API to enable drivers to implement MAC address based access control in AP/P2P GO mode. Capable drivers advertise this capability by setting the maximum number of MAC addresses in such a list in wiphy->max_acl_mac_addrs. An initial ACL may be given to the NL80211_CMD_START_AP command and/or changed later with NL80211_CMD_SET_MAC_ACL. Black- and whitelists are supported, but not simultaneously. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> [rewrite commit log, many cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-18 11:18:45 +05:30
cfg80211: fix inconsistency in trace for rdev_set_mac_acl There is NETDEV_ENTRY that was incorrectly assigned as WIPHY_ASSIGN, fix it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-07 11:08:29 +02:00
cfg80211/nl80211: add API for MAC address ACLs Add API to enable drivers to implement MAC address based access control in AP/P2P GO mode. Capable drivers advertise this capability by setting the maximum number of MAC addresses in such a list in wiphy->max_acl_mac_addrs. An initial ACL may be given to the NL80211_CMD_START_AP command and/or changed later with NL80211_CMD_SET_MAC_ACL. Black- and whitelists are supported, but not simultaneously. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> [rewrite commit log, many cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-18 11:18:45 +05:30
cfg80211: Extend support for IEEE 802.11r Fast BSS Transition Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the WLAN driver and NL80211_CMD_FT_EVENT to send FT events from the WLAN driver. This will carry the target AP's MAC address along with the relevant Information Elements. This event is used to report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). These changes allow FT to be supported with drivers that use an internal SME instead of user space option (like FT implementation in wpa_supplicant with mac80211-based drivers). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-27 17:14:27 +02:00
cfg80211: introduce critical protocol indication from user-space Some protocols need a more reliable connection to complete successful in reasonable time. This patch adds a user-space API to indicate the wireless driver that a critical protocol is about to commence and when it is done, using nl80211 primitives NL80211_CMD_CRIT_PROTOCOL_START and NL80211_CRIT_PROTOCOL_STOP. There can be only on critical protocol session started per registered cfg80211 device. The driver can support this by implementing the cfg80211 callbacks .crit_proto_start() and .crit_proto_stop(). Examples of protocols that can benefit from this are DHCP, EAPOL, APIPA. Exactly how the link can/should be made more reliable is up to the driver. Things to consider are avoid scanning, no multi-channel operations, and alter coexistence schemes. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-18 15:49:00 +02:00
nl80211/cfg80211: add channel switch command To allow channel switch announcements within beacons, add the channel switch command to nl80211/cfg80211. This is implementation is intended for AP and (later) IBSS mode. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-11 16:09:05 +02:00
cfg80211: Support multiple CSA counters Change the type of NL80211_ATTR_CSA_C_OFF_BEACON and NL80211_ATTR_CSA_C_OFF_PRESP to be NLA_BINARY which allows userspace to use beacons and probe responses with multiple CSA counters. This isn't breaking the API since userspace can continue to use nla_put_u16 for this attributes, which is equivalent to a single element u16 array. In addition advertise max number of supported CSA counters. This is needed when using CSA and eCSA IEs together. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09 14:11:46 +03:00
nl80211/cfg80211: add channel switch command To allow channel switch announcements within beacons, add the channel switch command to nl80211/cfg80211. This is implementation is intended for AP and (later) IBSS mode. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-11 16:09:05 +02:00
cfg80211: Support multiple CSA counters Change the type of NL80211_ATTR_CSA_C_OFF_BEACON and NL80211_ATTR_CSA_C_OFF_PRESP to be NLA_BINARY which allows userspace to use beacons and probe responses with multiple CSA counters. This isn't breaking the API since userspace can continue to use nla_put_u16 for this attributes, which is equivalent to a single element u16 array. In addition advertise max number of supported CSA counters. This is needed when using CSA and eCSA IEs together. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09 14:11:46 +03:00
nl80211/cfg80211: add channel switch command To allow channel switch announcements within beacons, add the channel switch command to nl80211/cfg80211. This is implementation is intended for AP and (later) IBSS mode. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-11 16:09:05 +02:00
cfg80211: Support multiple CSA counters Change the type of NL80211_ATTR_CSA_C_OFF_BEACON and NL80211_ATTR_CSA_C_OFF_PRESP to be NLA_BINARY which allows userspace to use beacons and probe responses with multiple CSA counters. This isn't breaking the API since userspace can continue to use nla_put_u16 for this attributes, which is equivalent to a single element u16 array. In addition advertise max number of supported CSA counters. This is needed when using CSA and eCSA IEs together. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09 14:11:46 +03:00
nl80211/cfg80211: add channel switch command To allow channel switch announcements within beacons, add the channel switch command to nl80211/cfg80211. This is implementation is intended for AP and (later) IBSS mode. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-11 16:09:05 +02:00
cfg80211: Support multiple CSA counters Change the type of NL80211_ATTR_CSA_C_OFF_BEACON and NL80211_ATTR_CSA_C_OFF_PRESP to be NLA_BINARY which allows userspace to use beacons and probe responses with multiple CSA counters. This isn't breaking the API since userspace can continue to use nla_put_u16 for this attributes, which is equivalent to a single element u16 array. In addition advertise max number of supported CSA counters. This is needed when using CSA and eCSA IEs together. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09 14:11:46 +03:00
nl80211/cfg80211: add channel switch command To allow channel switch announcements within beacons, add the channel switch command to nl80211/cfg80211. This is implementation is intended for AP and (later) IBSS mode. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-11 16:09:05 +02:00
cfg80211: Add support for QoS mapping This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 23:01:30 -08:00
cfg80211: Dynamic channel bandwidth changes in AP mode This extends NL80211_CMD_SET_CHANNEL to allow dynamic channel bandwidth changes in AP mode (including P2P GO) during a lifetime of the BSS. This can be used to implement, e.g., HT 20/40 MHz co-existence rules on the 2.4 GHz band. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28 11:22:08 +03:00
cfg80211: add WMM traffic stream API Add nl80211 and driver API to validate, add and delete traffic streams with appropriate settings. The API calls for userspace doing the action frame handshake with the peer, and then allows only to set up the parameters in the driver. To avoid setting up a session only to tear it down again, the validate API is provided, but the real usage later can still fail so userspace must be prepared for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-09 22:55:35 +03:00
cfg80211: introduce TDLS channel switch commands Introduce commands to initiate and cancel TDLS channel-switching. Once TDLS channel-switching is started, the lower level driver is responsible for continually initiating channel-switch operations and returning to the base (AP) channel to listen for beacons from time to time. Upon cancellation of the channel-switch all communication between the relevant TDLS peers will continue on the base channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19 12:54:26 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211/mac80211: clean up cfg80211 SME APIs Do some cleanups in the cfg80211 SME APIs, which are only used by mac80211. Most of these functions get a frame passed, and there isn't really any reason to export multiple functions as cfg80211 can check the frame type instead, do that. Additionally, the API functions have confusing names like cfg80211_send_...() which was meant to indicate that it sends an event to userspace, but gets a bit confusing when there's both TX and RX and they're not all clearly labeled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16 00:55:00 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211/mac80211: clean up cfg80211 SME APIs Do some cleanups in the cfg80211 SME APIs, which are only used by mac80211. Most of these functions get a frame passed, and there isn't really any reason to export multiple functions as cfg80211 can check the frame type instead, do that. Additionally, the API functions have confusing names like cfg80211_send_...() which was meant to indicate that it sends an event to userspace, but gets a bit confusing when there's both TX and RX and they're not all clearly labeled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16 00:55:00 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211/mac80211: clean up cfg80211 SME APIs Do some cleanups in the cfg80211 SME APIs, which are only used by mac80211. Most of these functions get a frame passed, and there isn't really any reason to export multiple functions as cfg80211 can check the frame type instead, do that. Additionally, the API functions have confusing names like cfg80211_send_...() which was meant to indicate that it sends an event to userspace, but gets a bit confusing when there's both TX and RX and they're not all clearly labeled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16 00:55:00 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211/mac80211: clean up cfg80211 SME APIs Do some cleanups in the cfg80211 SME APIs, which are only used by mac80211. Most of these functions get a frame passed, and there isn't really any reason to export multiple functions as cfg80211 can check the frame type instead, do that. Additionally, the API functions have confusing names like cfg80211_send_...() which was meant to indicate that it sends an event to userspace, but gets a bit confusing when there's both TX and RX and they're not all clearly labeled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16 00:55:00 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix mic_failure tracing tsc can be NULL (mac80211 currently always passes NULL), resulting in NULL-dereference. check before copying it. Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-17 15:00:56 +03:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: remove remain-on-channel channel type As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 18:31:02 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: Enable GO operation on additional channels Allow GO operation on a channel marked with IEEE80211_CHAN_GO_CONCURRENT iff there is an active station interface that is associated to an AP operating on the same channel in the 2 GHz band or the same UNII band (in the 5 GHz band). This relaxation is not allowed if the channel is marked with IEEE80211_CHAN_RADAR. Note that this is a permissive approach to the FCC definitions, that require a clear assessment that the device operating the AP is an authorized master, i.e., with radar detection and DFS capabilities. It is assumed that such restrictions are enforced by user space. Furthermore, it is assumed, that if the conditions that allowed for the operation of the GO on such a channel change, i.e., the station interface disconnected from the AP, it is the responsibility of user space to evacuate the GO from the channel. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-23 09:13:01 +02:00
cfg80211: use RTNL locked reg_can_beacon for IR-relaxation The RTNL is required to check for IR-relaxation conditions that allow more channels to beacon. Export an RTNL locked version of reg_can_beacon and use it where possible in AP/STA interface type flows, where IR-relaxation may be applicable. Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-08 15:41:44 +03:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: Enable GO operation on additional channels Allow GO operation on a channel marked with IEEE80211_CHAN_GO_CONCURRENT iff there is an active station interface that is associated to an AP operating on the same channel in the 2 GHz band or the same UNII band (in the 5 GHz band). This relaxation is not allowed if the channel is marked with IEEE80211_CHAN_RADAR. Note that this is a permissive approach to the FCC definitions, that require a clear assessment that the device operating the AP is an authorized master, i.e., with radar detection and DFS capabilities. It is assumed that such restrictions are enforced by user space. Furthermore, it is assumed, that if the conditions that allowed for the operation of the GO on such a channel change, i.e., the station interface disconnected from the AP, it is the responsibility of user space to evacuate the GO from the channel. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-23 09:13:01 +02:00
cfg80211: use RTNL locked reg_can_beacon for IR-relaxation The RTNL is required to check for IR-relaxation conditions that allow more channels to beacon. Export an RTNL locked version of reg_can_beacon and use it where possible in AP/STA interface type flows, where IR-relaxation may be applicable. Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-08 15:41:44 +03:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: Enable GO operation on additional channels Allow GO operation on a channel marked with IEEE80211_CHAN_GO_CONCURRENT iff there is an active station interface that is associated to an AP operating on the same channel in the 2 GHz band or the same UNII band (in the 5 GHz band). This relaxation is not allowed if the channel is marked with IEEE80211_CHAN_RADAR. Note that this is a permissive approach to the FCC definitions, that require a clear assessment that the device operating the AP is an authorized master, i.e., with radar detection and DFS capabilities. It is assumed that such restrictions are enforced by user space. Furthermore, it is assumed, that if the conditions that allowed for the operation of the GO on such a channel change, i.e., the station interface disconnected from the AP, it is the responsibility of user space to evacuate the GO from the channel. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-23 09:13:01 +02:00
cfg80211: use RTNL locked reg_can_beacon for IR-relaxation The RTNL is required to check for IR-relaxation conditions that allow more channels to beacon. Export an RTNL locked version of reg_can_beacon and use it where possible in AP/STA interface type flows, where IR-relaxation may be applicable. Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-08 15:41:44 +03:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: use RTNL locked reg_can_beacon for IR-relaxation The RTNL is required to check for IR-relaxation conditions that allow more channels to beacon. Export an RTNL locked version of reg_can_beacon and use it where possible in AP/STA interface type flows, where IR-relaxation may be applicable. Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-08 15:41:44 +03:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
nl80211/cfg80211: add radar detection command/event Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-08 18:16:19 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: add channel switch started notification Add a new NL80211_CH_SWITCH_STARTED_NOTIFY message that can be sent to the userspace when a channel switch process has started. This allows userspace to take action, for instance, by requesting other interfaces to switch channel as necessary. This patch introduces a function that allows the drivers to send this notification. It should be used when the driver starts processing a channel switch initiated by a remote device (eg. when a STA receives a CSA from the AP) and when it successfully starts a userspace-triggered channel switch (eg. when hostapd triggers a channel swith in the AP). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-07 14:31:35 +02:00
nl80211/cfg80211: add radar detection command/event Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-08 18:16:19 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix channel configuration in IBSS join When receiving an IBSS_JOINED event select the BSS object based on the {bssid, channel} couple rather than the bssid only. With the current approach if another cell having the same BSSID (but using a different channel) exists then cfg80211 picks up the wrong BSS object. The result is a mismatching channel configuration between cfg80211 and the driver, that can lead to any sort of problem. The issue can be triggered by having an IBSS sitting on given channel and then asking the driver to create a new cell using the same BSSID but with a different frequency. By passing the channel to cfg80211_get_bss() we can solve this ambiguity and retrieve/create the correct BSS object. All the users of cfg80211_ibss_joined() have been changed accordingly. Moreover WARN when cfg80211_ibss_joined() gets a NULL channel as argument and remove a bogus call of the same function in ath6kl (it does not make sense to call cfg80211_ibss_joined() with a zero BSSID on ibss-leave). Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> Cc: libertas-dev@lists.infradead.org Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> [minor code cleanup in ath6kl] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-29 17:53:43 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: Add TDLS event to allow drivers to request operations The NL80211_CMD_TDLS_OPER command was previously used only for userspace request for the kernel code to perform TDLS operations. However, there are also cases where the driver may need to request operations from userspace, e.g., when using security on the AP path. Add a new cfg80211 function for generating a TDLS operation event for drivers to request a new link to be set up (NL80211_TDLS_SETUP) or an existing link to be torn down (NL80211_TDLS_TEARDOWN). Drivers can optionally use these events, e.g., based on noticing data traffic being sent to a peer station that is seen with good signal strength. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 22:49:57 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: add bss_type and privacy arguments in cfg80211_get_bss() 802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-08 15:52:03 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: add bss_type and privacy arguments in cfg80211_get_bss() 802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-08 15:52:03 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: add bss_type and privacy arguments in cfg80211_get_bss() 802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-08 15:52:03 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
nl80211: add scan width to bss and scan request structs To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:49 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
nl80211: add scan width to bss and scan request structs To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:49 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
nl80211: add scan width to bss and scan request structs To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:49 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
nl80211: add scan width to bss and scan request structs To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:49 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
nl80211: add scan width to bss and scan request structs To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:49 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
nl80211: add scan width to bss and scan request structs To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:49 +02:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211: fix some tracing output issues In some cases, e.g. probe_status, there were spaces missing so the trace output was confusing. Also make it more like mac80211 when printing netdevs/wiphys to make reading a combined log easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16 17:22:28 +01:00
cfg80211: add cfg80211 exported function tracing Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27 12:49:39 +03:00
cfg80211/mac80211: support reporting wakeup reason When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-22 12:34:29 +01:00
cfg80211: fix WoWLAN wakeup tracing If the device reports a non-wireless wakeup reason, the tracing code crashes trying to dereference a NULL pointer. Fix this by checking the pointer on all accesses and also add a non_wireless tag to the event. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-29 12:09:14 +02:00
cfg80211/mac80211: support reporting wakeup reason When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-22 12:34:29 +01:00
cfg80211: fix WoWLAN wakeup tracing If the device reports a non-wireless wakeup reason, the tracing code crashes trying to dereference a NULL pointer. Fix this by checking the pointer on all accesses and also add a non_wireless tag to the event. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-29 12:09:14 +02:00
cfg80211/mac80211: support reporting wakeup reason When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-22 12:34:29 +01:00
cfg80211: fix WoWLAN wakeup tracing If the device reports a non-wireless wakeup reason, the tracing code crashes trying to dereference a NULL pointer. Fix this by checking the pointer on all accesses and also add a non_wireless tag to the event. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-29 12:09:14 +02:00
cfg80211/mac80211: support reporting wakeup reason When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-22 12:34:29 +01:00
cfg80211: Extend support for IEEE 802.11r Fast BSS Transition Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the WLAN driver and NL80211_CMD_FT_EVENT to send FT events from the WLAN driver. This will carry the target AP's MAC address along with the relevant Information Elements. This event is used to report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). These changes allow FT to be supported with drivers that use an internal SME instead of user space option (like FT implementation in wpa_supplicant with mac80211-based drivers). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-27 17:14:27 +02:00
cfg80211: export interface stopping function This exports a new cfg80211_stop_iface() function. This is intended for driver internal interface combination management and channel switching. Due to locking issues (it re-enters driver) the call is asynchronous and uses cfg80211 event list/worker. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09 15:11:01 +02:00
cfg80211: add tracing to rdev-ops Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 18:48:27 +03:00