kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/net/wireless/util.c

1815 lines
43 KiB
Raw Permalink Normal View History

cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: clean up includes Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20 14:31:42 +02:00
cfg80211: add Intel Mobile Communications copyright Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-03 15:24:58 +03:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-15 11:47:34 -04:00
cfg80211: clean up includes Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20 14:31:42 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
cfg80211: clean up includes Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20 14:31:42 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: Treat IPv6 diffserv the same as IPv4 for 802.11e Wireless will select a different hardware queue based on the top 3 bits of the diffserv field, for ipv4. Extend that queue selection mechanism to ipv6, and make the calls orthogonal. Signed-off-by: Dave Täht <dave.taht@bufferbloat.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22 12:55:08 -08:00
cfg80211: vlan priority handling in WMM If the VLAN tci is set in skb->vlan_tci use the priority field to determine the WMM priority. Signed-off-by: cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-26 14:04:52 +02:00
cfg80211: add MPLS and 802.21 classification MPLS labels may contain traffic control information, which should be evaluated and used by the wireless subsystem if present. Also check for IEEE 802.21 which is always network control traffic. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03 17:23:12 +01:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
wireless: implement basic rate helper function This adds a helper function that, given a bitmap of basic rates and a bitrate returns the response rate for this rate. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-29 20:00:45 +01:00
wireless: restrict to 32 legacy rates Since the standards only define 12 legacy rates, 32 is certainly a sane upper limit and we don't need to use u64 everywhere. Add sanity checking that no more than 32 rates are registered and change the variables to u32 throughout. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-21 15:13:48 +01:00
wireless: implement basic rate helper function This adds a helper function that, given a bitmap of basic rates and a bitrate returns the response rate for this rate. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-29 20:00:45 +01:00
cfg80211/mac80211: get mandatory rates based on scan width Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:54 +02:00
{cfg,mac}80211: move mandatory rates calculation to cfg80211 Move mandatory rates calculation to cfg80211, shared with non mac80211 drivers. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [extend documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-10 17:50:51 -07:00
cfg80211/mac80211: get mandatory rates based on scan width Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:54 +02:00
{cfg,mac}80211: move mandatory rates calculation to cfg80211 Move mandatory rates calculation to cfg80211, shared with non mac80211 drivers. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [extend documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-10 17:50:51 -07:00
cfg80211/mac80211: get mandatory rates based on scan width Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:54 +02:00
{cfg,mac}80211: move mandatory rates calculation to cfg80211 Move mandatory rates calculation to cfg80211, shared with non mac80211 drivers. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [extend documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-10 17:50:51 -07:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211: add 802.11ad (60gHz band) support Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02 09:32:32 +03:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211: add 802.11ad (60gHz band) support Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02 09:32:32 +03:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211: add 802.11ad (60gHz band) support Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02 09:32:32 +03:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211: add 802.11ad (60gHz band) support Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02 09:32:32 +03:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211: add 802.11ad (60gHz band) support Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02 09:32:32 +03:00
cfg80211: Extend channel to frequency mapping for 802.11j Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-17 13:37:28 +09:00
cfg80211: add 802.11ad (60gHz band) support Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02 09:32:32 +03:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: don't export ieee80211_get_channel This patch makes ieee80211_get_channel a static inline defined in cfg80211's header file which simply calls __ieee80211_get_channel to avoid symbol clashes with the ieee80211 code. The problem was pointed out by David Miller, thanks! Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-26 14:14:55 +01:00
wireless: add wiphy channel freq to channel struct lookup helper Add ieee80211_get_channel() which gets you a channel struct for a specific wiphy if that channel is present in that wiphy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-16 18:34:33 +01:00
cfg80211: don't export ieee80211_get_channel This patch makes ieee80211_get_channel a static inline defined in cfg80211's header file which simply calls __ieee80211_get_channel to avoid symbol clashes with the ieee80211 code. The problem was pointed out by David Miller, thanks! Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-26 14:14:55 +01:00
wireless: add wiphy channel freq to channel struct lookup helper Add ieee80211_get_channel() which gets you a channel struct for a specific wiphy if that channel is present in that wiphy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-16 18:34:33 +01:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
wireless: fix ERP rate flags In the rate API patch I accidentally reverted the test for ERP rates, this fixes it. All rates except 1, 2, 5.5 and 11 MBit are ERP rates, not those. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-30 17:36:10 +01:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
wireless: Fix WARN_ON() with ieee802.11b When the driver registers a IEEE80211_BAND_2GHZ band, it can either be 802.11b or 802.11g. But when 802.11b rates are registered "want" will be 3 (since 4 rates are being registered, and each of those 4 rates will decrease "want"). Since this is a correct situation, there is no need to trigger a WARN_ON() for this. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-02 23:53:10 +01:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: add 802.11ad (60gHz band) support Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02 09:32:32 +03:00
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 19:38:38 +01:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: Validate cipher suite against supported ciphers Instead of using a hardcoded list of cipher suites in nl80211.c, use a shared function in util.c to verify that the driver advertises support for the specified cipher. This provides more accurate validation of the values and allows vendor-specific cipher suites to be added in drivers. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21 18:14:56 +03:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 14:22:54 +02:00
cfg80211/mac80211: allow per-station GTKs This adds API to allow adding per-station GTKs, updates mac80211 to support it, and also allows drivers to remove a key from hwaccel again when this may be necessary due to multiple GTKs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05 19:39:30 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211/mac80211: allow per-station GTKs This adds API to allow adding per-station GTKs, updates mac80211 to support it, and also allows drivers to remove a key from hwaccel again when this may be necessary due to multiple GTKs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05 19:39:30 +02:00
cfg80211: Fix BIP (AES-CMAC) cipher validation This cipher can be used only as a group management frame cipher and as such, there is no point in validating that it is not used with non-zero key-index. Instead, verify that it is not used as a pairwise cipher regardless of the key index. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [change code to use switch statement which is easier to extend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:04 +02:00
cfg80211: Add new GCMP, CCMP-256, BIP-GMAC, BIP-CMAC-256 ciphers This makes cfg80211 aware of the GCMP, GCMP-256, CCMP-256, BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites. These new cipher suites were defined in IEEE Std 802.11ac-2013. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:05 +02:00
cfg80211: Fix BIP (AES-CMAC) cipher validation This cipher can be used only as a group management frame cipher and as such, there is no point in validating that it is not used with non-zero key-index. Instead, verify that it is not used as a pairwise cipher regardless of the key index. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [change code to use switch statement which is easier to extend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:04 +02:00
cfg80211: Add new GCMP, CCMP-256, BIP-GMAC, BIP-CMAC-256 ciphers This makes cfg80211 aware of the GCMP, GCMP-256, CCMP-256, BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites. These new cipher suites were defined in IEEE Std 802.11ac-2013. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:05 +02:00
cfg80211: Fix BIP (AES-CMAC) cipher validation This cipher can be used only as a group management frame cipher and as such, there is no point in validating that it is not used with non-zero key-index. Instead, verify that it is not used as a pairwise cipher regardless of the key index. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [change code to use switch statement which is easier to extend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:04 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: use key size constants Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-24 16:57:19 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: use key size constants Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-24 16:57:19 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: use key size constants Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-24 16:57:19 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: Add new GCMP, CCMP-256, BIP-GMAC, BIP-CMAC-256 ciphers This makes cfg80211 aware of the GCMP, GCMP-256, CCMP-256, BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites. These new cipher suites were defined in IEEE Std 802.11ac-2013. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:05 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: use key size constants Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-24 16:57:19 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: use key size constants Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-24 16:57:19 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: Add new GCMP, CCMP-256, BIP-GMAC, BIP-CMAC-256 ciphers This makes cfg80211 aware of the GCMP, GCMP-256, CCMP-256, BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites. These new cipher suites were defined in IEEE Std 802.11ac-2013. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:05 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
cfg80211: allow vendor specific cipher suites cfg80211 currently rejects all cipher suites it doesn't know about for key length checking purposes. This can lead to inconsistencies when a driver advertises an algorithm that cfg80211 doesn't know about. Remove this rejection so drivers can specify any algorithm they like. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27 14:26:51 +03:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
nl80211: Validate NL80211_ATTR_KEY_SEQ length Validate RSC (NL80211_ATTR_KEY_SEQ) length in nl80211/cfg80211 instead of having to do this in all the drivers. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-15 12:38:32 +03:00
cfg80211: Add new GCMP, CCMP-256, BIP-GMAC, BIP-CMAC-256 ciphers This makes cfg80211 aware of the GCMP, GCMP-256, CCMP-256, BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites. These new cipher suites were defined in IEEE Std 802.11ac-2013. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:05 +02:00
nl80211: Validate NL80211_ATTR_KEY_SEQ length Validate RSC (NL80211_ATTR_KEY_SEQ) length in nl80211/cfg80211 instead of having to do this in all the drivers. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-15 12:38:32 +03:00
cfg80211: Add new GCMP, CCMP-256, BIP-GMAC, BIP-CMAC-256 ciphers This makes cfg80211 aware of the GCMP, GCMP-256, CCMP-256, BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites. These new cipher suites were defined in IEEE Std 802.11ac-2013. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-24 19:52:05 +02:00
nl80211: Validate NL80211_ATTR_KEY_SEQ length Validate RSC (NL80211_ATTR_KEY_SEQ) length in nl80211/cfg80211 instead of having to do this in all the drivers. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-15 12:38:32 +03:00
cfg80211: Validate cipher suite against supported ciphers Instead of using a hardcoded list of cipher suites in nl80211.c, use a shared function in util.c to verify that the driver advertises support for the specified cipher. This provides more accurate validation of the values and allows vendor-specific cipher suites to be added in drivers. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21 18:14:56 +03:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 14:22:54 +02:00
cfg80211: implement wext key handling Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 13:54:58 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211: mark ieee80211_hdrlen const This function analyses only its single, value-passed argument, and has no side effects. Thus it can be const, which makes mac80211 smaller, for example: text data bss dec hex filename 362518 16720 884 380122 5ccda mac80211.ko (before) 362358 16720 884 379962 5cc3a mac80211.ko (after) a 160 byte saving in text size, and an optimisation because the function won't be called as often. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-12 14:49:58 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: Account HT Control field in Data frame hdrlen according to 802.11n-2009 ieee80211_hdrlen() should account account new HT Control field in 802.11 data frame header introduced by IEEE 802.11n standard. According to 802.11n-2009 HT Control field is present in data frames when both of following are met: 1. It is QoS data frame. 2. Order bit is set in Frame Control field. The change might be totally compatible with legacy non-11n aware frames, because 802.11-2007 standard states that "all QoS STAs set this subfield to 0". Signed-off-by: Andriy V. Tkachuk <andrit@ukr.net> Acked-by : Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-20 13:55:06 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: Account HT Control field in Data frame hdrlen according to 802.11n-2009 ieee80211_hdrlen() should account account new HT Control field in 802.11 data frame header introduced by IEEE 802.11n standard. According to 802.11n-2009 HT Control field is present in data frames when both of following are met: 1. It is QoS data frame. 2. Order bit is set in Frame Control field. The change might be totally compatible with legacy non-11n aware frames, because 802.11-2007 standard states that "all QoS STAs set this subfield to 0". Signed-off-by: Andriy V. Tkachuk <andrit@ukr.net> Acked-by : Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-20 13:55:06 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: correct header length calculation HT Control field may also be present in management frames, as defined in 8.2.4.1.10 of 802.11-2012. Account for this in calculation of header length. Signed-off-by: Fred Chou <fred.chou.nd@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-20 10:17:27 +08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: verify that skb data is present A number of places in the mesh code don't check that the frame data is present and in the skb header when trying to access. Add those checks and the necessary pskb_may_pull() calls. This prevents accessing data that doesn't actually exist. To do this, export ieee80211_get_mesh_hdrlen() to be able to use it in mac80211. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26 00:36:40 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: drop invalid mesh address extension frames The mesh header can have address extension by a 4th or a 5th and 6th address, but never both. Drop such frames in 802.11 -> 802.3 conversion along with any frames that have the wrong extension. Cc: stable@vger.kernel.org Reviewed-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25 21:51:59 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: drop invalid mesh address extension frames The mesh header can have address extension by a 4th or a 5th and 6th address, but never both. Drop such frames in 802.11 -> 802.3 conversion along with any frames that have the wrong extension. Cc: stable@vger.kernel.org Reviewed-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25 21:51:59 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: Use 3-address format for mesh broadcast frames. The 11s task group recently changed the frame mesh multicast/broadcast frame format to use 3-address. This was done to avoid interactions with widely deployed lazy-WDS access points. This patch changes the format of group addressed frames, both mesh-originated and proxied, to use the data format defined in draft D2.08 and forward. The address fields used for group addressed frames is: In 802.11 header ToDS:0 FromDS:1 addr1: DA (broadcast/multicast address) addr2: TA addr3: Mesh SA In address extension header: addr4: SA (only present if frame was proxied) Note that this change breaks backward compatibility with earlier mesh stack versions. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-10 12:15:48 -07:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: Use 3-address format for mesh broadcast frames. The 11s task group recently changed the frame mesh multicast/broadcast frame format to use 3-address. This was done to avoid interactions with widely deployed lazy-WDS access points. This patch changes the format of group addressed frames, both mesh-originated and proxied, to use the data format defined in draft D2.08 and forward. The address fields used for group addressed frames is: In 802.11 header ToDS:0 FromDS:1 addr1: DA (broadcast/multicast address) addr2: TA addr3: Mesh SA In address extension header: addr4: SA (only present if frame was proxied) Note that this change breaks backward compatibility with earlier mesh stack versions. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-10 12:15:48 -07:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: verify that skb data is present A number of places in the mesh code don't check that the frame data is present and in the skb header when trying to access. Add those checks and the necessary pskb_may_pull() calls. This prevents accessing data that doesn't actually exist. To do this, export ieee80211_get_mesh_hdrlen() to be able to use it in mac80211. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26 00:36:40 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: add ieee80211_amsdu_to_8023s Move the A-MSDU handling code from mac80211 to cfg80211 so that more drivers can use it. The new created function ieee80211_amsdu_to_8023s converts an A-MSDU frame to a list of 802.3 frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-01 10:18:37 +08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211/nl80211: introduce p2p device types This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 14:58:22 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: implement support for 4-address frames for AP and client mode In some situations it might be useful to run a network with an Access Point and multiple clients, but with each client bridged to a network behind it. For this to work, both the client and the AP need to transmit 4-address frames, containing both source and destination MAC addresses. With this patch, you can configure a client to communicate using only 4-address frames for data traffic. On the AP side you can enable 4-address frames for individual clients by isolating them in separate AP VLANs which are configured in 4-address mode. Such an AP VLAN will be limited to one client only, and this client will be used as the destination for all traffic on its interface, regardless of the destination MAC address in the packet headers. The advantage of this mode compared to regular WDS mode is that it's easier to configure and does not require a static list of peer MAC addresses on any side. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10 20:10:05 +01:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: support paged rx SKBs Mac80211 drivers can now pass paged SKBs to mac80211 via ieee80211_rx{_irqsafe}. The implementation currently use skb_linearize() in a few places i.e. management frame handling, software decryption, defragmentation and A-MSDU process. We will optimize them one by one later. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: Kalle Valo <kalle.valo@iki.fi> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-29 17:35:07 +08:00
wireless: drop invalid mesh address extension frames The mesh header can have address extension by a 4th or a 5th and 6th address, but never both. Drop such frames in 802.11 -> 802.3 conversion along with any frames that have the wrong extension. Cc: stable@vger.kernel.org Reviewed-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25 21:51:59 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: support paged rx SKBs Mac80211 drivers can now pass paged SKBs to mac80211 via ieee80211_rx{_irqsafe}. The implementation currently use skb_linearize() in a few places i.e. management frame handling, software decryption, defragmentation and A-MSDU process. We will optimize them one by one later. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: Kalle Valo <kalle.valo@iki.fi> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-29 17:35:07 +08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: support paged rx SKBs Mac80211 drivers can now pass paged SKBs to mac80211 via ieee80211_rx{_irqsafe}. The implementation currently use skb_linearize() in a few places i.e. management frame handling, software decryption, defragmentation and A-MSDU process. We will optimize them one by one later. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: Kalle Valo <kalle.valo@iki.fi> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-29 17:35:07 +08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: Use 3-address format for mesh broadcast frames. The 11s task group recently changed the frame mesh multicast/broadcast frame format to use 3-address. This was done to avoid interactions with widely deployed lazy-WDS access points. This patch changes the format of group addressed frames, both mesh-originated and proxied, to use the data format defined in draft D2.08 and forward. The address fields used for group addressed frames is: In 802.11 header ToDS:0 FromDS:1 addr1: DA (broadcast/multicast address) addr2: TA addr3: Mesh SA In address extension header: addr4: SA (only present if frame was proxied) Note that this change breaks backward compatibility with earlier mesh stack versions. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-10 12:15:48 -07:00
cfg80211/nl80211: introduce p2p device types This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 14:58:22 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: Convert compare_ether_addr to ether_addr_equal by hand spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08 18:56:56 +00:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: Use 3-address format for mesh broadcast frames. The 11s task group recently changed the frame mesh multicast/broadcast frame format to use 3-address. This was done to avoid interactions with widely deployed lazy-WDS access points. This patch changes the format of group addressed frames, both mesh-originated and proxied, to use the data format defined in draft D2.08 and forward. The address fields used for group addressed frames is: In 802.11 header ToDS:0 FromDS:1 addr1: DA (broadcast/multicast address) addr2: TA addr3: Mesh SA In address extension header: addr4: SA (only present if frame was proxied) Note that this change breaks backward compatibility with earlier mesh stack versions. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-10 12:15:48 -07:00
mac80211: support paged rx SKBs Mac80211 drivers can now pass paged SKBs to mac80211 via ieee80211_rx{_irqsafe}. The implementation currently use skb_linearize() in a few places i.e. management frame handling, software decryption, defragmentation and A-MSDU process. We will optimize them one by one later. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: Kalle Valo <kalle.valo@iki.fi> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-29 17:35:07 +08:00
wireless: drop invalid mesh address extension frames The mesh header can have address extension by a 4th or a 5th and 6th address, but never both. Drop such frames in 802.11 -> 802.3 conversion along with any frames that have the wrong extension. Cc: stable@vger.kernel.org Reviewed-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25 21:51:59 +02:00
mac80211: Use 3-address format for mesh broadcast frames. The 11s task group recently changed the frame mesh multicast/broadcast frame format to use 3-address. This was done to avoid interactions with widely deployed lazy-WDS access points. This patch changes the format of group addressed frames, both mesh-originated and proxied, to use the data format defined in draft D2.08 and forward. The address fields used for group addressed frames is: In 802.11 header ToDS:0 FromDS:1 addr1: DA (broadcast/multicast address) addr2: TA addr3: Mesh SA In address extension header: addr4: SA (only present if frame was proxied) Note that this change breaks backward compatibility with earlier mesh stack versions. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-10 12:15:48 -07:00
mac80211: support paged rx SKBs Mac80211 drivers can now pass paged SKBs to mac80211 via ieee80211_rx{_irqsafe}. The implementation currently use skb_linearize() in a few places i.e. management frame handling, software decryption, defragmentation and A-MSDU process. We will optimize them one by one later. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: Kalle Valo <kalle.valo@iki.fi> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-29 17:35:07 +08:00
mac80211: Use 3-address format for mesh broadcast frames. The 11s task group recently changed the frame mesh multicast/broadcast frame format to use 3-address. This was done to avoid interactions with widely deployed lazy-WDS access points. This patch changes the format of group addressed frames, both mesh-originated and proxied, to use the data format defined in draft D2.08 and forward. The address fields used for group addressed frames is: In 802.11 header ToDS:0 FromDS:1 addr1: DA (broadcast/multicast address) addr2: TA addr3: Mesh SA In address extension header: addr4: SA (only present if frame was proxied) Note that this change breaks backward compatibility with earlier mesh stack versions. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-10 12:15:48 -07:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: data path modification for TDLS peers Mark the STA entries of enabled TDLS peers with a new "peer authorized" flag. During link setup, allow special TDLS setup frames through the AP, but otherwise drop all packets destined to the peer. This is required by the TDLS (802.11z) specification in order to prevent reordering of MSDUs between the AP and direct paths. When setup completes and the peer is authorized, send data directly, bypassing the AP. In the Rx path, allow data to be received directly from TDLS peers. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-28 14:12:54 +03:00
cfg80211: 802.11p OCB mode handling This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-03 10:33:18 +01:00
mac80211: data path modification for TDLS peers Mark the STA entries of enabled TDLS peers with a new "peer authorized" flag. During link setup, allow special TDLS setup frames through the AP, but otherwise drop all packets destined to the peer. This is required by the TDLS (802.11z) specification in order to prevent reordering of MSDUs between the AP and direct paths. When setup completes and the peer is authorized, send data directly, bypassing the AP. In the Rx path, allow data to be received directly from TDLS peers. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-28 14:12:54 +03:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
mac80211: support paged rx SKBs Mac80211 drivers can now pass paged SKBs to mac80211 via ieee80211_rx{_irqsafe}. The implementation currently use skb_linearize() in a few places i.e. management frame handling, software decryption, defragmentation and A-MSDU process. We will optimize them one by one later. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: Kalle Valo <kalle.valo@iki.fi> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-29 17:35:07 +08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: Convert compare_ether_addr to ether_addr_equal by hand spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08 18:56:56 +00:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: Convert compare_ether_addr to ether_addr_equal by hand spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08 18:56:56 +00:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: add ieee80211_amsdu_to_8023s Move the A-MSDU handling code from mac80211 to cfg80211 so that more drivers can use it. The new created function ieee80211_amsdu_to_8023s converts an A-MSDU frame to a list of 802.3 frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-01 10:18:37 +08:00
cfg80211: constify more pointers in the cfg80211 API This also propagates through the drivers. The orinoco driver uses the cfg80211 API structs for internal bookkeeping, and so needs a (void *) cast that removes the const - but that's OK because it allocates those pointers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19 17:53:16 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211/nl80211: introduce p2p device types This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 14:58:22 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211/nl80211: introduce p2p device types This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 14:58:22 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211: 802.11p OCB mode handling This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-03 10:33:18 +01:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
net: add ETH_P_802_3_MIN Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for an 802.3 frame. Frames with a lower value in the ethernet type field are Ethernet II. Also update all the users of this value that David Miller and I could find to use the new constant. Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN should be >= not >. As suggested by Jesse Gross. Compile tested only. Cc: David Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Bart De Schuymer <bart.de.schuymer@pandora.be> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: bridge@lists.linux-foundation.org Cc: linux-wireless@vger.kernel.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: dev@openvswitch.org Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 13:38:25 +09:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: Remove unnecessary OOM logging messages Removing unnecessary messages saves code and text. Site specific OOM messages are duplications of a generic MM out of memory message and aren't really useful, so just delete them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29 14:17:41 -07:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: Remove unnecessary OOM logging messages Removing unnecessary messages saves code and text. Site specific OOM messages are duplications of a generic MM out of memory message and aren't really useful, so just delete them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29 14:17:41 -07:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: add ieee80211_amsdu_to_8023s Move the A-MSDU handling code from mac80211 to cfg80211 so that more drivers can use it. The new created function ieee80211_amsdu_to_8023s converts an A-MSDU frame to a list of 802.3 frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-01 10:18:37 +08:00
cfg80211: make stripping of 802.11 header optional from AMSDU Currently the devices that have already stripped IEEE 802.11 header from the AMSDU SKB can not use ieee80211_amsdu_to_8023s routine. This patch enhances ieee80211_amsdu_to_8023s() API by changing mandatory removing of IEEE 802.11 header from AMSDU to optional. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 11:22:31 -07:00
wireless: add ieee80211_amsdu_to_8023s Move the A-MSDU handling code from mac80211 to cfg80211 so that more drivers can use it. The new created function ieee80211_amsdu_to_8023s converts an A-MSDU frame to a list of 802.3 frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-01 10:18:37 +08:00
cfg80211: make stripping of 802.11 header optional from AMSDU Currently the devices that have already stripped IEEE 802.11 header from the AMSDU SKB can not use ieee80211_amsdu_to_8023s routine. This patch enhances ieee80211_amsdu_to_8023s() API by changing mandatory removing of IEEE 802.11 header from AMSDU to optional. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 11:22:31 -07:00
wireless: add ieee80211_amsdu_to_8023s Move the A-MSDU handling code from mac80211 to cfg80211 so that more drivers can use it. The new created function ieee80211_amsdu_to_8023s converts an A-MSDU frame to a list of 802.3 frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-01 10:18:37 +08:00
cfg80211: make stripping of 802.11 header optional from AMSDU Currently the devices that have already stripped IEEE 802.11 header from the AMSDU SKB can not use ieee80211_amsdu_to_8023s routine. This patch enhances ieee80211_amsdu_to_8023s() API by changing mandatory removing of IEEE 802.11 header from AMSDU to optional. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 11:22:31 -07:00
wireless: add ieee80211_amsdu_to_8023s Move the A-MSDU handling code from mac80211 to cfg80211 so that more drivers can use it. The new created function ieee80211_amsdu_to_8023s converts an A-MSDU frame to a list of 802.3 frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-01 10:18:37 +08:00
wireless: Convert compare_ether_addr to ether_addr_equal Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. I removed a conversion from scan.c/cmp_bss_core that appears to be a sorting function. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08 18:56:55 +00:00
wireless: add ieee80211_amsdu_to_8023s Move the A-MSDU handling code from mac80211 to cfg80211 so that more drivers can use it. The new created function ieee80211_amsdu_to_8023s converts an A-MSDU frame to a list of 802.3 frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-01 10:18:37 +08:00
wireless: Convert compare_ether_addr to ether_addr_equal Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. I removed a conversion from scan.c/cmp_bss_core that appears to be a sorting function. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08 18:56:55 +00:00
wireless: add ieee80211_amsdu_to_8023s Move the A-MSDU handling code from mac80211 to cfg80211 so that more drivers can use it. The new created function ieee80211_amsdu_to_8023s converts an A-MSDU frame to a list of 802.3 frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-01 10:18:37 +08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211: Add support for QoS mapping This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 23:01:30 -08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211: vlan priority handling in WMM If the VLAN tci is set in skb->vlan_tci use the priority field to determine the WMM priority. Signed-off-by: cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-26 14:04:52 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
net: rename vlan_tx_* helpers since "tx" is misleading there The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 17:13:44 +01:00
cfg80211: vlan priority handling in WMM If the VLAN tci is set in skb->vlan_tci use the priority field to determine the WMM priority. Signed-off-by: cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-26 14:04:52 +02:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
wireless: Treat IPv6 diffserv the same as IPv4 for 802.11e Wireless will select a different hardware queue based on the top 3 bits of the diffserv field, for ipv4. Extend that queue selection mechanism to ipv6, and make the calls orthogonal. Signed-off-by: Dave Täht <dave.taht@bufferbloat.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22 12:55:08 -08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211: add MPLS and 802.21 classification MPLS labels may contain traffic control information, which should be evaluated and used by the wireless subsystem if present. Also check for IEEE 802.21 which is always network control traffic. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03 17:23:12 +01:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211: Add support for QoS mapping This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 23:01:30 -08:00
wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-21 21:47:03 +08:00
cfg80211: assimilate and export ieee80211_bss_get_ie This function from mac80211 seems generally useful, and I will need it in cfg80211 soon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 17:18:40 +02:00
cfg80211: fix BSS struct IE access races When a BSS struct is updated, the IEs are currently overwritten or freed. This can lead to races if some other CPU is accessing the BSS struct and using the IEs concurrently. Fix this by always allocating the IEs in a new struct that holds the data and length and protecting access to this new struct with RCU. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29 01:25:20 +01:00
cfg80211: assimilate and export ieee80211_bss_get_ie This function from mac80211 seems generally useful, and I will need it in cfg80211 soon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 17:18:40 +02:00
cfg80211: fix BSS struct IE access races When a BSS struct is updated, the IEs are currently overwritten or freed. This can lead to races if some other CPU is accessing the BSS struct and using the IEs concurrently. Fix this by always allocating the IEs in a new struct that holds the data and length and protecting access to this new struct with RCU. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29 01:25:20 +01:00
cfg80211: assimilate and export ieee80211_bss_get_ie This function from mac80211 seems generally useful, and I will need it in cfg80211 soon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 17:18:40 +02:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 14:22:54 +02:00
cfg80211: change wiphy_to_dev function name Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-21 12:53:03 +08:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 14:22:54 +02:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
net/wireless: Use pr_<level> and netdev_<level> No change in output for pr_<level> prefixes. netdev_<level> output is different, arguably improved. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16 19:56:49 -08:00
cfg80211: avoid setting default_key if add_key fails In cfg80211_upload_connect_keys(), we call add_key, set_default_key and set_default_mgmt_key (if applicable) one by one. If one of these operations fails, we should stop calling the following functions. Because if the key is not added successfully, we should not set it as default key anyway. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-20 16:12:57 +08:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 14:22:54 +02:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
net/wireless: Use pr_<level> and netdev_<level> No change in output for pr_<level> prefixes. netdev_<level> output is different, arguably improved. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16 19:56:49 -08:00
cfg80211: avoid setting default_key if add_key fails In cfg80211_upload_connect_keys(), we call add_key, set_default_key and set_default_mgmt_key (if applicable) one by one. If one of these operations fails, we should stop calling the following functions. Because if the key is not added successfully, we should not set it as default key anyway. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-20 16:12:57 +08:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 14:22:54 +02:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
net/wireless: Use pr_<level> and netdev_<level> No change in output for pr_<level> prefixes. netdev_<level> output is different, arguably improved. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16 19:56:49 -08:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 14:22:54 +02:00
cfg80211: clear connect keys when freeing them When freeing the connect keys, clear the memory to avoid having the key material stick around in memory "forever". Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-10 13:39:54 +03:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 14:22:54 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: process pending events when unregistering net device libertas currently calls cfg80211_disconnected() when it is being brought down. This causes an event to be allocated, but since the wdev is already removed from the rdev by the time that the event processing work executes, the event is never processed or freed. http://article.gmane.org/gmane.linux.kernel.wireless.general/95666 Fix this leak, and other possible situations, by processing the event queue when a device is being unregistered. Thanks to Johannes Berg for the suggestion. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: stable@vger.kernel.org Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-02 18:41:48 +01:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 14:28:47 +05:30
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: properly send NL80211_ATTR_DISCONNECTED_BY_AP in disconnect When we disconnect from the AP, drivers call cfg80211_disconnect(). This doesn't know whether the disconnection was initiated locally or by the AP though, which can cause problems with the supplicant, for example with WPS. This issue obviously doesn't show up with any mac80211 based driver since mac80211 doesn't call this function. Fix this by requiring drivers to indicate whether the disconnect is locally generated or not. I've tried to update the drivers, but may not have gotten the values correct, and some drivers may currently not be able to report correct values. In case of doubt I left it at false, which is the current behaviour. For libertas, make adjustments as indicated by Dan Williams. Reported-by: Matthieu Mauger <matthieux.mauger@intel.com> Tested-by: Matthieu Mauger <matthieux.mauger@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-22 16:22:20 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: fix channel configuration in IBSS join When receiving an IBSS_JOINED event select the BSS object based on the {bssid, channel} couple rather than the bssid only. With the current approach if another cell having the same BSSID (but using a different channel) exists then cfg80211 picks up the wrong BSS object. The result is a mismatching channel configuration between cfg80211 and the driver, that can lead to any sort of problem. The issue can be triggered by having an IBSS sitting on given channel and then asking the driver to create a new cell using the same BSSID but with a different frequency. By passing the channel to cfg80211_get_bss() we can solve this ambiguity and retrieve/create the correct BSS object. All the users of cfg80211_ibss_joined() have been changed accordingly. Moreover WARN when cfg80211_ibss_joined() gets a NULL channel as argument and remove a bogus call of the same function in ath6kl (it does not make sense to call cfg80211_ibss_joined() with a zero BSSID on ibss-leave). Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> Cc: libertas-dev@lists.infradead.org Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> [minor code cleanup in ath6kl] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-29 17:53:43 +01:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: export interface stopping function This exports a new cfg80211_stop_iface() function. This is intended for driver internal interface combination management and channel switching. Due to locking issues (it re-enters driver) the call is asynchronous and uses cfg80211 event list/worker. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09 15:11:01 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
nl80211: prepare for non-netdev wireless devs In order to support a P2P device abstraction and Bluetooth high-speed AMPs, we need to have a way to identify virtual interfaces that don't have a netdev associated. Do this by adding a NL80211_ATTR_WDEV attribute to identify a wdev which may or may not also be a netdev. To simplify things, use a 64-bit value with the high 32 bits being the wiphy index for this new wdev identifier in the nl80211 API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-15 14:33:17 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: remove macro ASSERT_RDEV_LOCK(rdev) Macro ASSERT_RDEV_LOCK(rdev) is equal to ASSERT_RTNL(), so replace it with ASSERT_RTNL() and remove it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-19 17:04:36 +08:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: add P2P Device abstraction In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-16 00:19:54 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: disallow bridging managed/adhoc interfaces A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 00:56:30 +01:00
bridge: use rx_handler_data pointer to store net_bridge_port pointer Register net_bridge_port pointer as rx_handler data pointer. As br_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a bridge port. Also rcuized pointers are now correctly dereferenced in br_fdb.c and in netfilter parts. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 06:50:45 +00:00
cfg80211/nl80211: introduce p2p device types This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 14:58:22 +02:00
cfg80211: disallow bridging managed/adhoc interfaces A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 00:56:30 +01:00
cfg80211: ignore netif running state when changing iftype It was possible for mac80211 to be coerced into an unexpected flow causing sdata union to become corrupted. Station pointer was put into sdata->u.vlan.sta memory location while it was really master AP's sdata->u.ap.next_beacon. This led to station entry being later freed as next_beacon before __sta_info_flush() in ieee80211_stop_ap() and a subsequent invalid pointer dereference crash. The problem was that ieee80211_ptr->use_4addr wasn't cleared on interface type changes. This could be reproduced with the following steps: # host A and host B have just booted; no # wpa_s/hostapd running; all vifs are down host A> iw wlan0 set type station host A> iw wlan0 set 4addr on host A> printf 'interface=wlan0\nssid=4addrcrash\nchannel=1\nwds_sta=1' > /tmp/hconf host A> hostapd -B /tmp/conf host B> iw wlan0 set 4addr on host B> ifconfig wlan0 up host B> iw wlan0 connect -w hostAssid host A> pkill hostapd # host A crashed: [ 127.928192] BUG: unable to handle kernel NULL pointer dereference at 00000000000006c8 [ 127.929014] IP: [<ffffffff816f4f32>] __sta_info_flush+0xac/0x158 ... [ 127.934578] [<ffffffff8170789e>] ieee80211_stop_ap+0x139/0x26c [ 127.934578] [<ffffffff8100498f>] ? dump_trace+0x279/0x28a [ 127.934578] [<ffffffff816dc661>] __cfg80211_stop_ap+0x84/0x191 [ 127.934578] [<ffffffff816dc7ad>] cfg80211_stop_ap+0x3f/0x58 [ 127.934578] [<ffffffff816c5ad6>] nl80211_stop_ap+0x1b/0x1d [ 127.934578] [<ffffffff815e53f8>] genl_family_rcv_msg+0x259/0x2b5 Note: This isn't a revert of f8cdddb8d61d ("cfg80211: check iface combinations only when iface is running") as far as functionality is considered because b6a550156bc ("cfg80211/mac80211: move more combination checks to mac80211") moved the logic somewhere else already. Fixes: f8cdddb8d61d ("cfg80211: check iface combinations only when iface is running") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-22 10:57:22 +02:00
cfg80211: introduce capability for 4addr mode It's very likely that not many devices will support four-address mode in station or AP mode so introduce capability bits for both modes, set them in mac80211 and check them when userspace tries to use the mode. Also, keep track of 4addr in cfg80211 (wireless_dev) and not in mac80211 any more. mac80211 can also be improved for the VLAN case by not looking at the 4addr flag but maintaining the station pointer for it correctly. However, keep track of use_4addr for station mode in mac80211 to avoid all the derefs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 11:55:19 +01:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211/mac80211: correct qos-map locking Since the RTNL can't always be held, use wdev/sdata locking for the qos-map dereference in mac80211. This requires cfg80211 to consistently lock it, which it was missing in one place. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-30 23:12:37 +01:00
cfg80211: Add support for QoS mapping This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 23:01:30 -08:00
cfg80211/mac80211: correct qos-map locking Since the RTNL can't always be held, use wdev/sdata locking for the qos-map dereference in mac80211. This requires cfg80211 to consistently lock it, which it was missing in one place. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-30 23:12:37 +01:00
cfg80211: introduce capability for 4addr mode It's very likely that not many devices will support four-address mode in station or AP mode so introduce capability bits for both modes, set them in mac80211 and check them when userspace tries to use the mode. Also, keep track of 4addr in cfg80211 (wireless_dev) and not in mac80211 any more. mac80211 can also be improved for the VLAN case by not looking at the 4addr flag but maintaining the station pointer for it correctly. However, keep track of use_4addr for station mode in mac80211 to avoid all the derefs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 11:55:19 +01:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: .stop_ap when interface is going down We'll need this for proper channel tracking (which is going to be needed for channel context accounting and finding matching/active interface combination). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:46:57 +02:00
cfg80211: send stop AP event only due to internal reason Commit "nl80211: send event when AP operation is stopped" added an event to notify user space that an AP interface has been stopped, to handle cases such as suspend etc. The event is sent regardless if the stop AP flow was triggered by user space or due to internal state change. This might cause issues with wpa_supplicant/hostapd flows that consider stop AP flow as a synchronous one, e.g., AP/GO channel change in the absence of CSA support. In such cases, the flow will restart the AP immediately after the stop AP flow is done, and only handle the stop AP event after the current flow is done, and as a result stop the AP again. Change the current implementation to only send the event in case the stop AP was triggered due to an internal reason. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25 15:33:38 +02:00
cfg80211: .stop_ap when interface is going down We'll need this for proper channel tracking (which is going to be needed for channel context accounting and finding matching/active interface combination). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:46:57 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211/nl80211: introduce p2p device types This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 14:58:22 +02:00
cfg80211: remove some locked wrappers from sme API By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-15 17:44:01 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: remove some locked wrappers from sme API By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-15 17:44:01 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
cfg80211: introduce capability for 4addr mode It's very likely that not many devices will support four-address mode in station or AP mode so introduce capability bits for both modes, set them in mac80211 and check them when userspace tries to use the mode. Also, keep track of 4addr in cfg80211 (wireless_dev) and not in mac80211 any more. mac80211 can also be improved for the VLAN case by not looking at the 4addr flag but maintaining the station pointer for it correctly. However, keep track of use_4addr for station mode in mac80211 to avoid all the derefs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 11:55:19 +01:00
cfg80211: disallow bridging managed/adhoc interfaces A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 00:56:30 +01:00
cfg80211: 802.11p OCB mode handling This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-03 10:33:18 +01:00
cfg80211/nl80211: introduce p2p device types This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 14:58:22 +02:00
cfg80211: disallow bridging managed/adhoc interfaces A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 00:56:30 +01:00
cfg80211/nl80211: introduce p2p device types This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 14:58:22 +02:00
cfg80211: disallow bridging managed/adhoc interfaces A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 00:56:30 +01:00
cfg80211/mac80211: extensible frame processing Allow userspace to register for more than just action frames by giving the frame subtype, and make it possible to use this in various modes as well. With some tweaks and some added functionality this will, in the future, also be usable in AP mode and be able to replace the cooked monitor interface currently used in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-12 15:38:38 +02:00
cfg80211: disallow bridging managed/adhoc interfaces A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 00:56:30 +01:00
cfg80211: add P2P Device abstraction In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-16 00:19:54 +02:00
cfg80211: disallow bridging managed/adhoc interfaces A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19 00:56:30 +01:00
cfg80211: track monitor interfaces count Implements .set_monitor_enabled(wiphy, enabled). Notifies driver upon change of interface layout. If only monitor interfaces become present it is called with 2nd argument being true. If non-monitor interface appears then 2nd argument is false. Driver is notified only upon change. This makes it more obvious about the fact that cfg80211 supports single monitor channel. Once we implement multi-channel we don't want to allow setting monitor channel while other interface types are running. Otherwise it would be ambiguous once we start considering num_different_channels. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:47:01 +02:00
cfg80211: clean up properly on interface type change When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:51:05 +02:00
wireless: report reasonable bitrate for MCS rates through wext Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates through the wireless extensions interface. However, nl80211 was converting MCS rates into a reasonable bitrate number. This patch moves the nl80211 code to cfg80211 where it is now shared between both the nl80211 interface and the wireless extensions interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-09 16:43:52 -05:00
cfg80211: bitrate calculation for 60g 60g band uses different from .11n MCS scheme, so bitrate should be calculated differently Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-05 14:25:50 +03:00
nl80211/cfg80211: add VHT MCS support Add support for reporting and calculating VHT MCSes. Note that I'm not completely sure that the bitrate calculations are correct, nor that they can't be simplified. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09 14:56:41 +01:00
cfg80211: change bandwidth reporting to explicit field For some reason, we made the bandwidth separate flags, which is rather confusing - a single rate cannot have different bandwidths at the same time. Change this to no longer be flags but use a separate field for the bandwidth ('bw') instead. While at it, add support for 5 and 10 MHz rates - these are reported as regular legacy rates with their real bitrate, but tagged as 5/10 now to make it easier to distinguish them. In the nl80211 API, the flags are preserved, but the code now can also clearly only set a single one of the flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-15 16:14:02 +01:00
nl80211/cfg80211: add VHT MCS support Add support for reporting and calculating VHT MCSes. Note that I'm not completely sure that the bitrate calculations are correct, nor that they can't be simplified. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09 14:56:41 +01:00
{nl,cfg}80211: support high bitrates Until now, a u16 value was used to represent bitrate value. With VHT bitrates this becomes too small. Introduce a new 32-bit bitrate attribute. nl80211 will report both the new and the old attribute, unless the bitrate doesn't fit into the old u16 attribute in which case only the new one will be reported. User space tools encouraged to prefer the 32-bit attribute, if available (since it won't be available on older kernels.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [reword commit message and comments a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-05 14:25:49 +03:00
wireless: report reasonable bitrate for MCS rates through wext Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates through the wireless extensions interface. However, nl80211 was converting MCS rates into a reasonable bitrate number. This patch moves the nl80211 code to cfg80211 where it is now shared between both the nl80211 interface and the wireless extensions interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-09 16:43:52 -05:00
nl80211/cfg80211: add VHT MCS support Add support for reporting and calculating VHT MCSes. Note that I'm not completely sure that the bitrate calculations are correct, nor that they can't be simplified. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09 14:56:41 +01:00
wireless: report reasonable bitrate for MCS rates through wext Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates through the wireless extensions interface. However, nl80211 was converting MCS rates into a reasonable bitrate number. This patch moves the nl80211 code to cfg80211 where it is now shared between both the nl80211 interface and the wireless extensions interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-09 16:43:52 -05:00
cfg80211: bitrate calculation for 60g 60g band uses different from .11n MCS scheme, so bitrate should be calculated differently Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-05 14:25:50 +03:00
nl80211/cfg80211: add VHT MCS support Add support for reporting and calculating VHT MCSes. Note that I'm not completely sure that the bitrate calculations are correct, nor that they can't be simplified. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09 14:56:41 +01:00
wireless: report reasonable bitrate for MCS rates through wext Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates through the wireless extensions interface. However, nl80211 was converting MCS rates into a reasonable bitrate number. This patch moves the nl80211 code to cfg80211 where it is now shared between both the nl80211 interface and the wireless extensions interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-09 16:43:52 -05:00
cfg80211: add warning when calculating MCS rates >= 32 cfg80211_calculate_bitrate() doesn't work for MCS rates 32 or higher, and it has always returned 0 in that case. Warn if it ever really happens. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08 21:36:20 +02:00
wireless: report reasonable bitrate for MCS rates through wext Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates through the wireless extensions interface. However, nl80211 was converting MCS rates into a reasonable bitrate number. This patch moves the nl80211 code to cfg80211 where it is now shared between both the nl80211 interface and the wireless extensions interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-09 16:43:52 -05:00
cfg80211: change bandwidth reporting to explicit field For some reason, we made the bandwidth separate flags, which is rather confusing - a single rate cannot have different bandwidths at the same time. Change this to no longer be flags but use a separate field for the bandwidth ('bw') instead. While at it, add support for 5 and 10 MHz rates - these are reported as regular legacy rates with their real bitrate, but tagged as 5/10 now to make it easier to distinguish them. In the nl80211 API, the flags are preserved, but the code now can also clearly only set a single one of the flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-15 16:14:02 +01:00
wireless: report reasonable bitrate for MCS rates through wext Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates through the wireless extensions interface. However, nl80211 was converting MCS rates into a reasonable bitrate number. This patch moves the nl80211 code to cfg80211 where it is now shared between both the nl80211 interface and the wireless extensions interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-09 16:43:52 -05:00
cfg80211: expose cfg80211_calculate_bitrate() Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:31:47 -08:00
cfg80211: restrict AP beacon intervals Multiple virtual AP interfaces can currently try to use different beacon intervals, but that just leads to problems since it won't actually be done that way by drivers. Return an error in this case to make sure it won't be done wrong. Also, ignore attempts to change the DTIM period or beacon interval during the lifetime of the BSS. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-09 18:41:15 +02:00
cfg80211: change function signature of cfg80211_get_p2p_attr() The function cfg80211_get_p2p_attr() can fail and returns a negative error code. However, the return type is unsigned int. The largest positive number is determined by desired_len variable in the function, which is u16. So changing the return type to int to allow easy error checking. Also change the type for the attribute to enum for improved type checking. Signed-off-by: Arend van Spriel <arend@broadcom.com> [fix indentation, don't use u8 attr variable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-25 19:13:28 +01:00
wireless: add utility function to get P2P attribute Parsing the P2P attributes can be tricky as their contents can be split across multiple (vendor) IEs. Thus, it's not possible to parse them like IEs (by returning a pointer to the data.) Instead, provide a function that copies the attribute data into a caller-provided buffer and returns the size needed (useful in case the buffer was too small.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-29 19:48:40 +01:00
cfg80211: move IE split utilities here from mac80211 As the next patch will require the IE splitting utility functions in cfg80211, move them there from mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-31 15:36:22 +02:00
cfg80211: add ieee80211_operating_class_to_band This function converts a (global only!) operating class to an internal band identifier. This will be needed for extended channel switch support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-01 17:00:55 +02:00
cfg80211: add operating classes 128-130 Operating classes 128-130 are defined in the 11ac spec for the 5GHz band. Update ieee80211_operating_class_to_band() to support them. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-01 09:10:01 +02:00
cfg80211: add ieee80211_operating_class_to_band This function converts a (global only!) operating class to an internal band identifier. This will be needed for extended channel switch support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-01 17:00:55 +02:00
cfg80211: add 60GHz regulatory class Add regulatory class for 60GHz band, according to the last specification. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-23 09:54:21 +03:00
cfg80211: add ieee80211_operating_class_to_band This function converts a (global only!) operating class to an internal band identifier. This will be needed for extended channel switch support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-01 17:00:55 +02:00
cfg/mac80211: add regulatory classes IE during TDLS setup Seems Broadcom TDLS peers (Nexus 5, Xperia Z3) refuse to allow TDLS connection when channel-switching is supported but the regulatory classes IE is missing from the setup request. Add a chandef to reg-class translation function to cfg80211 and use it to add the required IE during setup. For now add only the current regulatory class as supported - it is enough to resolve the compatibility issue. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-18 08:46:08 +02:00
cfg80211: restrict AP beacon intervals Multiple virtual AP interfaces can currently try to use different beacon intervals, but that just leads to problems since it won't actually be done that way by drivers. Return an error in this case to make sure it won't be done wrong. Also, ignore attempts to change the DTIM period or beacon interval during the lifetime of the BSS. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-09 18:41:15 +02:00
nl80211: prepare for non-netdev wireless devs In order to support a P2P device abstraction and Bluetooth high-speed AMPs, we need to have a way to identify virtual interfaces that don't have a netdev associated. Do this by adding a NL80211_ATTR_WDEV attribute to identify a wdev which may or may not also be a netdev. To simplify things, use a 64-bit value with the high 32 bits being the wiphy index for this new wdev identifier in the nl80211 API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-15 14:33:17 +02:00
cfg80211: restrict AP beacon intervals Multiple virtual AP interfaces can currently try to use different beacon intervals, but that just leads to problems since it won't actually be done that way by drivers. Return an error in this case to make sure it won't be done wrong. Also, ignore attempts to change the DTIM period or beacon interval during the lifetime of the BSS. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-09 18:41:15 +02:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: allow drivers to iterate over matching combinations The patch splits cfg80211_check_combinations() into an iterator function and a simple iteration user. This makes it possible for drivers to asses how many channels can use given iftype setup. This in turn can be used for future multi-interface/multi-channel channel switching. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09 15:29:22 +02:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: allow restricting supported dfs regions At the moment, the ath9k/ath10k DFS module only supports detecting ETSI radar patterns. Add a bitmap in the interface combinations, indicating which DFS regions are supported by the detector. If unset, support for all regions is assumed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05 11:48:40 +02:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: allow restricting supported dfs regions At the moment, the ath9k/ath10k DFS module only supports detecting ETSI radar patterns. Add a bitmap in the interface combinations, indicating which DFS regions are supported by the detector. If unset, support for all regions is assumed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05 11:48:40 +02:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: fix radar_detect combination checking All bits from radar_detect must match combination radar bitmask. Otherwise it is theoretically possible to lead into an invalid combination provided a driver reports strange combinations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-21 14:52:15 +01:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: allow restricting supported dfs regions At the moment, the ath9k/ath10k DFS module only supports detecting ETSI radar patterns. Add a bitmap in the interface combinations, indicating which DFS regions are supported by the detector. If unset, support for all regions is assumed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05 11:48:40 +02:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: allow drivers to iterate over matching combinations The patch splits cfg80211_check_combinations() into an iterator function and a simple iteration user. This makes it possible for drivers to asses how many channels can use given iftype setup. This in turn can be used for future multi-interface/multi-channel channel switching. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09 15:29:22 +02:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: allow drivers to iterate over matching combinations The patch splits cfg80211_check_combinations() into an iterator function and a simple iteration user. This makes it possible for drivers to asses how many channels can use given iftype setup. This in turn can be used for future multi-interface/multi-channel channel switching. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09 15:29:22 +02:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: add channel checking for iface combinations .connect cannot be handled since the driver scans and connects on its own. It is up to the driver then to refuse a connection (with -EBUSY for example). Non-fixed channel IBSSes always take a single channel resource. For example two non-fixed channel IBSSes always take up 2 num_different_channels, even if they operate on the same channel at a given point of time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:47:07 +02:00
cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-08 14:04:07 +01:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: add channel checking for iface combinations .connect cannot be handled since the driver scans and connects on its own. It is up to the driver then to refuse a connection (with -EBUSY for example). Non-fixed channel IBSSes always take a single channel resource. For example two non-fixed channel IBSSes always take up 2 num_different_channels, even if they operate on the same channel at a given point of time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:47:07 +02:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-08 14:04:07 +01:00
cfg80211: remove radar requirements check from cfg80211_can_use_iftype_chan() We don't have to double check whether the parameters passed to cfg80211_can_use_iftype_chan() are correct. We should just make sure they *are* when we call this function. Remove the radar_detect argument check in cfg80211_can_use_iftype_chan() to simplify the code. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> [keep braces around a long comment + single statement] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20 16:36:21 +02:00
cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-08 14:04:07 +01:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-08 14:04:07 +01:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-08 14:04:07 +01:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: add channel checking for iface combinations .connect cannot be handled since the driver scans and connects on its own. It is up to the driver then to refuse a connection (with -EBUSY for example). Non-fixed channel IBSSes always take a single channel resource. For example two non-fixed channel IBSSes always take up 2 num_different_channels, even if they operate on the same channel at a given point of time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:47:07 +02:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211/mac80211: move interface counting for combination check to mac80211 Move the counting part of the interface combination check from cfg80211 to mac80211. This is needed to simplify locking when the driver has to perform a combination check by itself (eg. with channel-switch). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13 11:31:59 +02:00
cfg80211: add channel checking for iface combinations .connect cannot be handled since the driver scans and connects on its own. It is up to the driver then to refuse a connection (with -EBUSY for example). Non-fixed channel IBSSes always take a single channel resource. For example two non-fixed channel IBSSes always take up 2 num_different_channels, even if they operate on the same channel at a given point of time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:47:07 +02:00
nl80211: prepare for non-netdev wireless devs In order to support a P2P device abstraction and Bluetooth high-speed AMPs, we need to have a way to identify virtual interfaces that don't have a netdev associated. Do this by adding a NL80211_ATTR_WDEV attribute to identify a wdev which may or may not also be a netdev. To simplify things, use a 64-bit value with the high 32 bits being the wiphy index for this new wdev identifier in the nl80211 API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-15 14:33:17 +02:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: invert P2P-Device vs. netdev check ordering In cfg80211_can_use_iftype_chan(), check for P2P Device first, and then for netdevs. This doesn't really change anything but makes the code a bit easier to read since it may not be obvious for everyone at first that a P2P device has no netdev. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-19 12:19:39 +02:00
cfg80211: add P2P Device abstraction In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-16 00:19:54 +02:00
cfg80211: invert P2P-Device vs. netdev check ordering In cfg80211_can_use_iftype_chan(), check for P2P Device first, and then for netdevs. This doesn't really change anything but makes the code a bit easier to read since it may not be obvious for everyone at first that a P2P device has no netdev. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-19 12:19:39 +02:00
cfg80211: add P2P Device abstraction In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-16 00:19:54 +02:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: fix locking and lockdep complaints To call cfg80211_get_chan_state() we need to lock the wdev, so we need to lock the wdev_iter mutex in cfg80211_can_use_iftype_chan(). This needs to use nested locking for lockdep. Also, cfg80211_get_chan_state() doesn't actually use the rdev, so remove that completely including the lock assertion that isn't needed. Reported-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-10 19:39:02 +02:00
cfg80211: consider existing DFS interfaces It was possible to break interface combinations in the following way: combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 With the above interface combinations it was possible to: step 1. start AP on DFS channel by matching combo 2 step 2. start AP on non-DFS channel by matching combo 1 This was possible beacuse (step 2) did not consider if other interfaces require radar detection. The patch changes how cfg80211 tracks channels - instead of channel itself now a complete chandef is stored. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-29 14:22:27 +01:00
cfg80211: fix locking and lockdep complaints To call cfg80211_get_chan_state() we need to lock the wdev, so we need to lock the wdev_iter mutex in cfg80211_can_use_iftype_chan(). This needs to use nested locking for lockdep. Also, cfg80211_get_chan_state() doesn't actually use the rdev, so remove that completely including the lock assertion that isn't needed. Reported-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-10 19:39:02 +02:00
cfg80211: add channel checking for iface combinations .connect cannot be handled since the driver scans and connects on its own. It is up to the driver then to refuse a connection (with -EBUSY for example). Non-fixed channel IBSSes always take a single channel resource. For example two non-fixed channel IBSSes always take up 2 num_different_channels, even if they operate on the same channel at a given point of time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:47:07 +02:00
cfg80211: respect iface combinations when starting operation devlist_mtx locking is changed to accomodate changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:47:08 +02:00
cfg80211: add channel checking for iface combinations .connect cannot be handled since the driver scans and connects on its own. It is up to the driver then to refuse a connection (with -EBUSY for example). Non-fixed channel IBSSes always take a single channel resource. For example two non-fixed channel IBSSes always take up 2 num_different_channels, even if they operate on the same channel at a given point of time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:47:07 +02:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-08 14:04:07 +01:00
cfg80211: enforce lack of interface combinations My grand plan to allow drivers to gradually move over to advertising virtual interface combinations and only enforce with drivers that do want it enforced doesn't seem to be working out, only Christian ever added the advertising (to carl9170), nobody else did. Begin enforcing combinations in cfg80211 so that users can rely on the information reported about a device. Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15 10:16:16 +01:00
cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-17 16:52:35 +02:00
cfg80211: advertise possible interface combinations Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 10:58:57 +02:00
cfg80211: allow userspace to control supported rates in scan Some P2P scans are not allowed to advertise 11b rates, but that is a rather special case so instead of having that, allow userspace to request the rate sets (per band) that are advertised in scan probe request frames. Since it's needed in two places now, factor out some common code parsing a rate array. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 18:08:35 +02:00
cfg80211: fix scan crash on single-band cards commit 58389c69150e6032504dfcd3edca6b1975c8b5bc Author: Johannes Berg <johannes.berg@intel.com> Date: Mon Jul 18 18:08:35 2011 +0200 cfg80211: allow userspace to control supported rates in scan made single-band cards crash since it would always access all wiphy->bands[]. Fix this and reject any attempts in the new helper ieee80211_get_ratemask() to do the same, rejecting rates configuration for unsupported bands. Reported-by: Pavel Roskin <proski@gnu.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 00:52:16 +02:00
cfg80211: allow userspace to control supported rates in scan Some P2P scans are not allowed to advertise 11b rates, but that is a rather special case so instead of having that, allow userspace to request the rate sets (per band) that are advertised in scan probe request frames. Since it's needed in two places now, factor out some common code parsing a rate array. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 18:08:35 +02:00
cfg80211: work around a sparse issue sparse reports: net/wireless/util.c:499:30: error: cannot size expression net/wireless/util.c:503:30: error: cannot size expression This is evidently due to the EXPORT_SYMBOL() of the bridge_tunnel_header and rfc1042 header variables. Move them to the end of the file to work around the sparse issue. The error itself from sparse can be ignored safely, but since sparse stops parsing at errors, other issues after this would go undetected. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21 11:09:22 +01:00
cfg80211: Add a function to get the number of supported channels Add a utility function to get the number of channels supported by the device, and update the places in the code that need this data. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [replace another occurrence in libertas, fix kernel-doc, fix bugs] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-09 11:37:23 +02:00
cfg80211: implement cfg80211_get_station cfg80211 API Implement and export the new cfg80211_get_station() API. This utility can be used by other kernel modules to obtain detailed information about a given wireless station. It will be in particular useful to batman-adv which will implement a wireless rate based metric. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19 21:53:21 +02:00
cfg80211: work around a sparse issue sparse reports: net/wireless/util.c:499:30: error: cannot size expression net/wireless/util.c:503:30: error: cannot size expression This is evidently due to the EXPORT_SYMBOL() of the bridge_tunnel_header and rfc1042 header variables. Move them to the end of the file to work around the sparse issue. The error itself from sparse can be ignored safely, but since sparse stops parsing at errors, other issues after this would go undetected. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21 11:09:22 +01:00