kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-01 18:21:29 +00:00
Code Issues Releases Packages Activity
linux/include/net/switchdev.h

252 lines
6.7 KiB
Raw Permalink Normal View History

net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 14:34:17 +01:00
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:41 +02:00
switchdev: add netlink flags to IPv4 FIB add op Pass in the netlink flags (NLM_F_*) into switchdev driver for IPv4 FIB add op to allow driver to 1) optimize hardware updates, 2) handle ip route prepend and append commands correctly. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09 13:59:09 -07:00
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 14:34:17 +01:00
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:36 +01:00
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:41 +02:00
switchdev: remove pointers from switchdev objects When object is used in deferred work, we cannot use pointers in switchdev object structures because the memory they point at may be already used by someone else. So rather do local copy of the value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 19:40:51 +02:00
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:36 +01:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: skip over ports returning -EOPNOTSUPP when recursing ports This allows us to recurse over all the ports, skipping over unsupporting ports. Without the change, the recursion would stop at first unsupported port. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 19:23:18 -07:00
switchdev: allow caller to explicitly request attr_set as deferred Caller should know if he can call attr_set directly (when holding RTNL) or if he has to defer the att_set processing for later. This also allows drivers to sleep inside attr_set and report operation status back to switchdev core. Switchdev core then warns if status is not ok, instead of silent errors happening in drivers. Benefit from newly introduced switchdev deferred ops infrastructure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 19:40:50 +02:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:41 +02:00
switchdev: reduce transaction phase enum down to a boolean Now, since we have only 2 values for transaction phase, just use bool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:49 +02:00
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:41 +02:00
switchdev: add switchdev_trans_ph_prepare/commit helpers Add helpers which should be used int attr_set/obj_add switchdev ops to check the phase of transaction. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:43 +02:00
switchdev: reduce transaction phase enum down to a boolean Now, since we have only 2 values for transaction phase, just use bool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:49 +02:00
switchdev: add switchdev_trans_ph_prepare/commit helpers Add helpers which should be used int attr_set/obj_add switchdev ops to check the phase of transaction. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:43 +02:00
switchdev: reduce transaction phase enum down to a boolean Now, since we have only 2 values for transaction phase, just use bool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:49 +02:00
switchdev: add switchdev_trans_ph_prepare/commit helpers Add helpers which should be used int attr_set/obj_add switchdev ops to check the phase of transaction. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:43 +02:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_* To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:42 +02:00
net: switchdev: Add support for querying supported bridge flags by hardware This is done as a preparation stage before setting the bridge port flags from the bridge code. Currently the device can be queried for the bridge flags state, but the querier cannot distinguish if the flag is disabled or if it is not supported at all. Thus, add new attr and a bit-mask which include information regarding the support on a per-flag basis. Drivers that support bridge offload but not support bridge flags should return zeroed bitmask. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 08:44:10 +02:00
switchdev: bridge: Offload mc router ports Offload the mc router ports list, whenever it is being changed. It is done because in some cases mc packets needs to be flooded to all the ports in this list. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 14:54:42 +01:00
switchdev: add bridge ageing_time attribute Setting the stage to push bridge-level attributes down to port driver so hardware can be programmed accordingly. Bridge-level attribute example is ageing_time. This is a per-bridge attribute, not a per-bridge-port attr. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 19:23:17 -07:00
switchdev: add bridge vlan_filtering attribute Adding vlan_filtering attribute to allow hardware vendor to support vlan-aware bridges. Vlan_filtering is a per-bridge attribute. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06 13:01:05 +01:00
switchdev: bridge: Offload multicast disabled Offload multicast disabled flag, for more accurate mc flood behavior: When it is on, the mdb should be ignored. When it is off, unregistered mc packets should be flooded to mc router ports. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 14:54:40 +01:00
net: bridge: Notify on bridge device mrouter state changes Add the SWITCHDEV_ATTR_ID_BRIDGE_MROUTER switchdev notification type, used to indicate whether the bridge is or isn't mrouter. Notify when the bridge changes its state, similarly to the already existing bridged port mrouter notifications. The notification uses the switchdev_attr.u.mrouter boolean flag to indicate the current bridge mrouter status. Thus, it only indicates whether the bridge is currently used as an mrouter or not, and does not indicate the exact mrouter state of the bridge (learning, permanent, etc.). Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09 11:15:31 +02:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 16:03:35 +01:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: Adding complete operation to deferred switchdev ops When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21 12:52:43 +02:00
switchdev: convert parent_id_get to switchdev attr get Switch ID is just a gettable port attribute. Convert switchdev op switchdev_parent_id_get to a switchdev attr. Note: for sysfs and netlink interfaces, SWITCHDEV_ATTR_PORT_PARENT_ID is called with SWITCHDEV_F_NO_RECUSE to limit switch ID user-visiblity to only port netdevs. So when a port is stacked under bond/bridge, the user can only query switch id via the switch ports, but not via the upper devices Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:49 -07:00
switchdev: convert STP update to switchdev attr set STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:51 -07:00
switchdev: add bridge port flags attr rocker: use switchdev get/set attr for bridge port flags Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:55 -07:00
net: switchdev: Add support for querying supported bridge flags by hardware This is done as a preparation stage before setting the bridge port flags from the bridge code. Currently the device can be queried for the bridge flags state, but the querier cannot distinguish if the flag is disabled or if it is not supported at all. Thus, add new attr and a bit-mask which include information regarding the support on a per-flag basis. Drivers that support bridge offload but not support bridge flags should return zeroed bitmask. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 08:44:10 +02:00
switchdev: bridge: Offload mc router ports Offload the mc router ports list, whenever it is being changed. It is done because in some cases mc packets needs to be flooded to all the ports in this list. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 14:54:42 +01:00
net: switchdev: change ageing_time type to clock_t The switchdev value for the SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME attribute is a clock_t and requires to use helpers such as clock_t_to_jiffies() to convert to milliseconds. Change ageing_time type from u32 to clock_t to make it explicit. Fixes: f55ac58ae64c ("switchdev: add bridge ageing_time attribute") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-18 15:02:06 -04:00
switchdev: add bridge vlan_filtering attribute Adding vlan_filtering attribute to allow hardware vendor to support vlan-aware bridges. Vlan_filtering is a per-bridge attribute. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06 13:01:05 +01:00
switchdev: bridge: Offload multicast disabled Offload multicast disabled flag, for more accurate mc flood behavior: When it is on, the mdb should be ignored. When it is off, unregistered mc packets should be flooded to mc router ports. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 14:54:40 +01:00
switchdev: don't use anonymous union on switchdev attr/obj structs Older gcc versions (e.g. gcc version 4.4.6) don't like anonymous unions which was causing build issues on the newly added switchdev attr/obj structs. Fix this by using named union on structs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 11:16:50 -07:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:52 -07:00
switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_* Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:41 +02:00
switchdev: Adding MDB entry offload Define HW multicast entry: MAC and VID. Using a MAC address simplifies support for both IPV4 and IPv6. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10 21:06:22 +01:00
net: bridge: Add/del switchdev object on host join/leave When the host joins or leaves a multicast group, use switchdev to add an object to the hardware to forward traffic for the group to the host. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 23:10:59 +01:00
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:52 -07:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 16:03:35 +01:00
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:46 +02:00
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 19:40:52 +02:00
switchdev: Adding complete operation to deferred switchdev ops When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21 12:52:43 +02:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_* Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:41 +02:00
switchdev: rename switchdev_obj_vlan to switchdev_obj_port_vlan Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:43 +02:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
net: switchdev: extract struct switchdev_obj_* Now that switchdev and its drivers directly use specific switchdev_obj_* structures, move them out of the switchdev_obj union and get rif of this outer structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 12:07:18 -04:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: Adding MDB entry offload Define HW multicast entry: MAC and VID. Using a MAC address simplifies support for both IPV4 and IPv6. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10 21:06:22 +01:00
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:41 +02:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: add swdev ops As discussed at netconf, introduce swdev_ops as first step to move switchdev ops from ndo to swdev. This will keep switchdev from cluttering up ndo ops space. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15 21:07:14 -07:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
net: switchdev: extract struct switchdev_obj_* Now that switchdev and its drivers directly use specific switchdev_obj_* structures, move them out of the switchdev_obj union and get rif of this outer structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 12:07:18 -04:00
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:52 -07:00
net: switchdev: extract struct switchdev_obj_* Now that switchdev and its drivers directly use specific switchdev_obj_* structures, move them out of the switchdev_obj union and get rif of this outer structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 12:07:18 -04:00
switchdev: add swdev ops As discussed at netconf, introduce swdev_ops as first step to move switchdev ops from ndo to swdev. This will keep switchdev from cluttering up ndo ops space. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15 21:07:14 -07:00
switchdev: s/swdev_/switchdev_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:47 -07:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: make struct switchdev_attr parameter const for attr_set calls Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 19:40:49 +02:00
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:41 +02:00
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:52 -07:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 10:02:41 +02:00
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:52 -07:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: add swdev ops As discussed at netconf, introduce swdev_ops as first step to move switchdev ops from ndo to swdev. This will keep switchdev from cluttering up ndo ops space. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15 21:07:14 -07:00
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:46 -07:00
net: bridge: Add support for notifying devices about FDB add/del Currently the bridge doesn't notify the underlying devices about new FDBs learned. The FDB sync is placed on the switchdev notifier chain because devices may potentially learn FDB that are not directly related to their ports, for example: 1. Mixed SW/HW bridge - FDBs that point to the ASICs external devices should be offloaded as CPU traps in order to perform forwarding in slow path. 2. EVPN - Externally learned FDBs for the vtep device. Notification is sent only about static FDB add/del. This is done due to fact that currently this is the only scenario supported by switch drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 08:44:14 +02:00
net: bridge: Receive notification about successful FDB offload When a new static FDB is added to the bridge a notification is sent to the driver for offload. In case of successful offload the driver should notify the bridge back, which in turn should mark the FDB as offloaded. Currently, externally learned is equivalent for being offloaded which is not correct due to the fact that FDBs which are added from user-space are also marked as externally learned. In order to specify if an FDB was successfully offloaded a new flag is introduced. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 08:44:15 +02:00
vxlan: Add switchdev notifications When offloading VXLAN devices, drivers need to know about events in VXLAN FDB database. Since VXLAN models a bridge, it is natural to distribute the VXLAN FDB notifications using the pre-existing switchdev notification mechanism. To that end, introduce two new notification types: SWITCHDEV_VXLAN_FDB_ADD_TO_DEVICE and SWITCHDEV_VXLAN_FDB_DEL_TO_DEVICE. Introduce a new function, vxlan_fdb_switchdev_call_notifiers() to send the new notifier types, and a struct switchdev_notifier_vxlan_fdb_info to communicate the details of the FDB entry under consideration. Invoke the new function from vxlan_fdb_notify(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 08:53:22 +00:00
vxlan: Support marking RDSTs as offloaded Offloaded bridge FDB entries are marked with NTF_OFFLOADED. Implement a similar mechanism for VXLAN, where a given remote destination can be marked as offloaded. To that end, introduce a new event, SWITCHDEV_VXLAN_FDB_OFFLOADED, through which the marking is communicated to the vxlan driver. To identify which RDST should be marked as offloaded, an switchdev_notifier_vxlan_fdb_info is passed to the listeners. The "offloaded" flag in that object determines whether the offloaded mark should be set or cleared. When sending offloaded FDB entries over netlink, mark them with NTF_OFFLOADED. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 08:53:26 +00:00
net: replace br_fdb_external_learn_* calls with switchdev notifier events This patch benefits from newly introduced switchdev notifier and uses it to propagate fdb learn events from rocker driver to bridge. That avoids direct function calls and possible use by other listeners (ovs). Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:37 +01:00
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:46 -07:00
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:36 +01:00
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:46 -07:00
net: replace br_fdb_external_learn_* calls with switchdev notifier events This patch benefits from newly introduced switchdev notifier and uses it to propagate fdb learn events from rocker driver to bridge. That avoids direct function calls and possible use by other listeners (ovs). Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:37 +01:00
bridge: switchdev: Allow clearing FDB entry offload indication Currently, an FDB entry only ceases being offloaded when it is deleted. This changes with VxLAN encapsulation. Devices capable of performing VxLAN encapsulation usually have only one FDB table, unlike the software data path which has two - one in the bridge driver and another in the VxLAN driver. Therefore, bridge FDB entries pointing to a VxLAN device are only offloaded if there is a corresponding entry in the VxLAN FDB. Allow clearing the offload indication in case the corresponding entry was deleted from the VxLAN FDB. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 08:53:29 +00:00
net: replace br_fdb_external_learn_* calls with switchdev notifier events This patch benefits from newly introduced switchdev notifier and uses it to propagate fdb learn events from rocker driver to bridge. That avoids direct function calls and possible use by other listeners (ovs). Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:37 +01:00
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:36 +01:00
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:46 -07:00
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:36 +01:00
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 14:34:17 +01:00
switchdev: introduce switchdev deferred ops infrastructure Introduce infrastructure which will be used internally to defer ops. Note that the deferred ops are queued up and either are processed by scheduled work or explicitly by user calling deferred_process function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 19:40:48 +02:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: make struct switchdev_attr parameter const for attr_set calls Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 19:40:49 +02:00
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:46 +02:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:46 +02:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:46 -07:00
switchdev: add offload_fwd_mark generator helper skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be unique for device and may even be unique for a sub-set of ports within device, so add switchdev helper function to generate unique marks based on port's switch ID and group_ifindex. group_ifindex would typically be the container dev's ifindex, such as the bridge's ifindex. The generator uses a global hash table to store offload_fwd_marks hashed by {switch ID, group_ifindex} key. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-18 18:24:50 -07:00
switchdev: add IPv4 fib ndo ops wrappers Add IPv4 fib ndo wrapper funcs and stub them out for now. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05 21:21:15 -08:00
net/switchdev: Export the same parent ID service function This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 10:32:43 +03:00
net: switchdev: add SET_SWITCHDEV_OPS helper Add a helper to allow switchdev ops to be set if NET_SWITCHDEV is configured and do nothing otherwise. This allows for slightly cleaner code which uses switchdev but does not select NET_SWITCHDEV. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29 22:08:11 +02:00
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 14:34:17 +01:00
switchdev: introduce switchdev deferred ops infrastructure Introduce infrastructure which will be used internally to defer ops. Note that the deferred ops are queued up and either are processed by scheduled work or explicitly by user calling deferred_process function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 19:40:48 +02:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: make struct switchdev_attr parameter const for attr_set calls Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 19:40:49 +02:00
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:48 -07:00
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:52 -07:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:52 -07:00
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 11:03:45 +02:00
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:52 -07:00
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:46 -07:00
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:36 +01:00
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:46 -07:00
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:36 +01:00
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 09:47:46 -07:00
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 23:49:36 +01:00
net/switchdev: Export the same parent ID service function This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 10:32:43 +03:00
net: switchdev: add SET_SWITCHDEV_OPS helper Add a helper to allow switchdev ops to be set if NET_SWITCHDEV is configured and do nothing otherwise. This allows for slightly cleaner code which uses switchdev but does not select NET_SWITCHDEV. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29 22:08:11 +02:00
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 14:34:17 +01:00