linux

of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>

2012-04-11 17:30:11 +00:00

of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/pci: Add pci_register_io_range() and pci_pio_to_address() Some architectures do not have a simple view of the PCI I/O space and instead use a range of CPU addresses that map to bus addresses. For some architectures these ranges will be expressed by OF bindings in a device tree file. This patch introduces a pci_register_io_range() helper function with a generic implementation that can be used by such architectures to keep track of the I/O ranges described by the PCI bindings. If the PCI_IOBASE macro is not defined, that signals lack of support for PCI and we return an error. In order to retrieve the CPU address associated with an I/O port, a new helper function pci_pio_to_address() is introduced. This will search in the list of ranges registered with pci_register_io_range() and return the CPU address that corresponds to the given port. [arnd: add dummy !CONFIG_OF pci_pio_to_address() to fix build errors] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rob Herring <robh@kernel.org> CC: Grant Likely <grant.likely@linaro.org>

2014-09-29 15:29:21 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Allow busses with #size-cells=0 It's quite legitimate for a DT node to specify #size-cells=0. One example is a node that's used to collect a number of non-memory-mapped devices. In that scenario, there may be multiple child nodes with the same name (type) thus necessitating the use of unit addresses in node names, and reg properties: / { regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; regulator@0 { compatible = "regulator-fixed"; reg = <0>; ... }; regulator@1 { compatible = "regulator-fixed"; reg = <1>; ... }; ... }; }; However, #size-cells=0 prevents translation of reg property values into the parent node's address space. In turn, this triggers the kernel to emit error messages during boot, such as: prom_parse: Bad cell count for /regulators/regulator@0 To prevent printing these error messages for legitimate DT content, a number of changes are made: 1) of_get_address()/of_get_pci_address() are modified only to validate the value of #address-cells, and not #size-cells. 2) of_can_translate_address() is added to indicate whether address translation is possible. 3) of_device_make_bus_id() is modified to name devices based on the translated address only where possible, and otherwise fall back to using the (first cell of the) raw untranslated address. 4) of_device_alloc() is modified to create memory resources for a device only if the address can be translated into the CPU's address space. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>

2012-07-25 17:34:37 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Add reg-names property to name an iomem resource Add a reg-names property to allow for reg regions to be reference by name instead of by index. Some devices have multiple register regions which are more naturally referenced by name. If the name is available, use it to name the resource when creating a devices. Otherwise keep the device name. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> [Generalized documentation to be for any -names property] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-12-05 15:23:55 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: little-endian fixes Fix some endian issues in the OF address translation code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:11 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: little-endian fixes Fix some endian issues in the OF address translation code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:11 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Allows to use the PCI translator without the PCI core Translating an address from a PCI node of the device-tree into a CPU physical address doesn't require the core PCI support. Those translations are just related to the device tree itself. The use case to translate an address from a PCI node without actually using the PCI core support is when one needs to access the PCI controller without accessing any PCI devices. Marvell SoCs, such as Kirkwood, Dove or Armada XP for instance, come with an IP of a PCI controller. In the registers of this controller are stored the ID and the revision of a SoC. With this patch it will be possible to read the SoC ID of a board without any PCI device and then without the PCI core support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-02-19 23:14:55 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Fix address decoding on Bimini and js2x machines Commit: e38c0a1fbc5803cbacdaac0557c70ac8ca5152e7 of/address: Handle #address-cells > 2 specially broke real time clock access on Bimini, js2x, and similar powerpc machines using the "maple" platform. That code was indirectly relying on the old (broken) behaviour of the translation for the hypertransport to ISA bridge. This fixes it by treating hypertransport as a PCI bus Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2013-07-03 16:01:10 +10:00

of: fix PCI bus match for PCIe slots On IBM pseries systems the device_type device-tree property of a PCIe bridge contains the string "pciex". The of_bus_pci_match() function was looking only for "pci" on this property, so in such cases the bus matching code was falling back to the default bus, causing problems on functions that should be using "assigned-addresses" for region address translation. This patch fixes the problem by also looking for "pciex" on the PCI bus match function. v2: added comment Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>

2014-02-03 13:31:03 -02:00

of: Fix address decoding on Bimini and js2x machines Commit: e38c0a1fbc5803cbacdaac0557c70ac8ca5152e7 of/address: Handle #address-cells > 2 specially broke real time clock access on Bimini, js2x, and similar powerpc machines using the "maple" platform. That code was indirectly relying on the old (broken) behaviour of the translation for the hypertransport to ISA bridge. This fixes it by treating hypertransport as a PCI bus Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2013-07-03 16:01:10 +10:00

of: fix PCI bus match for PCIe slots On IBM pseries systems the device_type device-tree property of a PCIe bridge contains the string "pciex". The of_bus_pci_match() function was looking only for "pci" on this property, so in such cases the bus matching code was falling back to the default bus, causing problems on functions that should be using "assigned-addresses" for region address translation. This patch fixes the problem by also looking for "pciex" on the PCI bus match function. v2: added comment Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>

2014-02-03 13:31:03 -02:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Allows to use the PCI translator without the PCI core Translating an address from a PCI node of the device-tree into a CPU physical address doesn't require the core PCI support. Those translations are just related to the device tree itself. The use case to translate an address from a PCI node without actually using the PCI core support is when one needs to access the PCI controller without accessing any PCI devices. Marvell SoCs, such as Kirkwood, Dove or Armada XP for instance, come with an IP of a PCI controller. In the registers of this controller are stored the ID and the revision of a SoC. With this patch it will be possible to read the SoC ID of a board without any PCI device and then without the PCI core support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-02-19 23:14:55 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Allows to use the PCI translator without the PCI core Translating an address from a PCI node of the device-tree into a CPU physical address doesn't require the core PCI support. Those translations are just related to the device tree itself. The use case to translate an address from a PCI node without actually using the PCI core support is when one needs to access the PCI controller without accessing any PCI devices. Marvell SoCs, such as Kirkwood, Dove or Armada XP for instance, come with an IP of a PCI controller. In the registers of this controller are stored the ID and the revision of a SoC. With this patch it will be possible to read the SoC ID of a board without any PCI device and then without the PCI core support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-02-19 23:14:55 +01:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: use __be32 types for big-endian device tree data Use the sparse annotations so we can keep track of endianness. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-10-10 21:24:10 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Allow busses with #size-cells=0 It's quite legitimate for a DT node to specify #size-cells=0. One example is a node that's used to collect a number of non-memory-mapped devices. In that scenario, there may be multiple child nodes with the same name (type) thus necessitating the use of unit addresses in node names, and reg properties: / { regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; regulator@0 { compatible = "regulator-fixed"; reg = <0>; ... }; regulator@1 { compatible = "regulator-fixed"; reg = <1>; ... }; ... }; }; However, #size-cells=0 prevents translation of reg property values into the parent node's address space. In turn, this triggers the kernel to emit error messages during boot, such as: prom_parse: Bad cell count for /regulators/regulator@0 To prevent printing these error messages for legitimate DT content, a number of changes are made: 1) of_get_address()/of_get_pci_address() are modified only to validate the value of #address-cells, and not #size-cells. 2) of_can_translate_address() is added to indicate whether address translation is possible. 3) of_device_make_bus_id() is modified to name devices based on the translated address only where possible, and otherwise fall back to using the (first cell of the) raw untranslated address. 4) of_device_alloc() is modified to create memory resources for a device only if the address can be translated into the CPU's address space. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>

2012-07-25 17:34:37 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: little-endian fixes Fix some endian issues in the OF address translation code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:11 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: little-endian fixes Fix some endian issues in the OF address translation code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:11 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: Add reg-names property to name an iomem resource Add a reg-names property to allow for reg regions to be reference by name instead of by index. Some devices have multiple register regions which are more naturally referenced by name. If the name is available, use it to name the resource when creating a devices. Otherwise keep the device name. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> [Generalized documentation to be for any -names property] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-12-05 15:23:55 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/pci: Provide support for parsing PCI DT ranges property This patch factors out common implementation patterns to reduce overall kernel code and provide a means for host bridge drivers to directly obtain struct resources from the DT's ranges property without relying on architecture specific DT handling. This will make it easier to write archiecture independent host bridge drivers and mitigate against further duplication of DT parsing code. This patch can be used in the following way: struct of_pci_range_parser parser; struct of_pci_range range; if (of_pci_range_parser_init(&parser, np)) ; //no ranges property for_each_of_pci_range(&parser, &range) { /* directly access properties of the address range, e.g.: range.pci_space, range.pci_addr, range.cpu_addr, range.size, range.flags alternatively obtain a struct resource, e.g.: struct resource res; of_pci_range_to_resource(&range, np, &res); */ } Additionally the implementation takes care of adjacent ranges and merges them into a single range (as was the case with powerpc and microblaze). Signed-off-by: Andrew Murray <Andrew.Murray@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jason Cooper <jason@lakedaemon.net>

2013-05-16 17:55:17 +02:00

of/pci: Fix the conversion of IO ranges into IO resources The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from PCI ranges to resources failed to take that into account, returning a CPU physical address instead of a port number. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number where it is being needed. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Thierry Reding <thierry.reding@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Catalin Marinas <catalin.marinas@arm.com>

2014-09-29 15:29:25 +01:00

of/pci: Move of_pci_range_to_resource() to of/address.c We need to enhance of_pci_range_to_resources() enough that it won't make sense for it to be inline anymore. Move it to drivers/of/address.c, under #ifdef CONFIG_PCI. of_address.h previously implemented of_pci_range_to_resources() unconditionally, regardless of any config options. The implementation in address.c is defined only when CONFIG_OF_ADDRESS=y and CONFIG_PCI=y, so add a dummy version to avoid build errors when CONFIG_OF or CONFIG_OF_ADDRESS is not defined. [bhelgaas: drop extra detail from changelog, move def under CONFIG_PCI, add dummy of_pci_range_to_resource() for build errors (from Arnd)] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Catalin Marinas <catalin.marinas@arm.com>

2014-09-29 15:29:24 +01:00

of/pci: Fix the conversion of IO ranges into IO resources The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from PCI ranges to resources failed to take that into account, returning a CPU physical address instead of a port number. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number where it is being needed. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Thierry Reding <thierry.reding@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Catalin Marinas <catalin.marinas@arm.com>

2014-09-29 15:29:25 +01:00

of/pci: Move of_pci_range_to_resource() to of/address.c We need to enhance of_pci_range_to_resources() enough that it won't make sense for it to be inline anymore. Move it to drivers/of/address.c, under #ifdef CONFIG_PCI. of_address.h previously implemented of_pci_range_to_resources() unconditionally, regardless of any config options. The implementation in address.c is defined only when CONFIG_OF_ADDRESS=y and CONFIG_PCI=y, so add a dummy version to avoid build errors when CONFIG_OF or CONFIG_OF_ADDRESS is not defined. [bhelgaas: drop extra detail from changelog, move def under CONFIG_PCI, add dummy of_pci_range_to_resource() for build errors (from Arnd)] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Catalin Marinas <catalin.marinas@arm.com>

2014-09-29 15:29:24 +01:00

of/pci: Fix the conversion of IO ranges into IO resources The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from PCI ranges to resources failed to take that into account, returning a CPU physical address instead of a port number. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number where it is being needed. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Thierry Reding <thierry.reding@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Catalin Marinas <catalin.marinas@arm.com>

2014-09-29 15:29:25 +01:00

PCI: of: Add 64-bit address recognition without LPAE support If non-LPAE kernel is booted up on a machine with 64-bit PCI resources, PCI controller probe fails with: PCI host bridge /pcie@10000000 ranges: IO 0x3eff0000..0x3effffff -> 0x00000000 MEM 0x10000000..0x3efeffff -> 0x10000000 MEM 0x8000000000..0xffffffffff -> 0x8000000000 pci-host-generic 3f000000.pcie: resource collision: [mem 0x00000000-0xffffffff] conflicts with /pl011@9000000 [mem 0x09000000-0x09000fff] pci-host-generic: probe of 3f000000.pcie failed with error -16 This happens because res->start assignment in of_pci_range_to_resource() truncates the upper part of the address, because res->start is of phys_addr_t type, which is 32-bit on non-LPAE kernels. This patch adds explicit recognition of 64-bit resources, preventing from potential problems when e. g. 0x8000001234 would be converted to 0x00001234. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org>

2015-10-08 10:24:25 +03:00

of/pci: Fix the conversion of IO ranges into IO resources The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from PCI ranges to resources failed to take that into account, returning a CPU physical address instead of a port number. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number where it is being needed. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Thierry Reding <thierry.reding@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Catalin Marinas <catalin.marinas@arm.com>

2014-09-29 15:29:25 +01:00

of/pci: Move of_pci_range_to_resource() to of/address.c We need to enhance of_pci_range_to_resources() enough that it won't make sense for it to be inline anymore. Move it to drivers/of/address.c, under #ifdef CONFIG_PCI. of_address.h previously implemented of_pci_range_to_resources() unconditionally, regardless of any config options. The implementation in address.c is defined only when CONFIG_OF_ADDRESS=y and CONFIG_PCI=y, so add a dummy version to avoid build errors when CONFIG_OF or CONFIG_OF_ADDRESS is not defined. [bhelgaas: drop extra detail from changelog, move def under CONFIG_PCI, add dummy of_pci_range_to_resource() for build errors (from Arnd)] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Catalin Marinas <catalin.marinas@arm.com>

2014-09-29 15:29:24 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Allows to use the PCI translator without the PCI core Translating an address from a PCI node of the device-tree into a CPU physical address doesn't require the core PCI support. Those translations are just related to the device tree itself. The use case to translate an address from a PCI node without actually using the PCI core support is when one needs to access the PCI controller without accessing any PCI devices. Marvell SoCs, such as Kirkwood, Dove or Armada XP for instance, come with an IP of a PCI controller. In the registers of this controller are stored the ID and the revision of a SoC. With this patch it will be possible to read the SoC ID of a board without any PCI device and then without the PCI core support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-02-19 23:14:55 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Allows to use the PCI translator without the PCI core Translating an address from a PCI node of the device-tree into a CPU physical address doesn't require the core PCI support. Those translations are just related to the device tree itself. The use case to translate an address from a PCI node without actually using the PCI core support is when one needs to access the PCI controller without accessing any PCI devices. Marvell SoCs, such as Kirkwood, Dove or Armada XP for instance, come with an IP of a PCI controller. In the registers of this controller are stored the ID and the revision of a SoC. With this patch it will be possible to read the SoC ID of a board without any PCI device and then without the PCI core support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-02-19 23:14:55 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

drivers/of: Add empty ranges quirk for PA-Semi The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f92dd, "of/base: Fix PowerPC address parsing hack" Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Stable <stable@vger.kernel.org> # v3.18+

2015-03-23 14:16:38 +11:00

of/base: Fix PowerPC address parsing hack We have a historical hack that treats missing ranges properties as the equivalent of an empty one. This is needed for ancient PowerMac "bad" device-trees, and shouldn't be enabled for any other PowerPC platform, otherwise we get some nasty layout of devices in sysfs or even duplication when a set of otherwise identically named devices is created multiple times under a different parent node with no ranges property. This fix is needed for the PowerNV i2c busses to be exposed properly and will fix a number of other embedded cases. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>

2014-11-14 17:55:03 +11:00

drivers/of: Add empty ranges quirk for PA-Semi The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f92dd, "of/base: Fix PowerPC address parsing hack" Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Stable <stable@vger.kernel.org> # v3.18+

2015-03-23 14:16:38 +11:00

of/base: Fix PowerPC address parsing hack We have a historical hack that treats missing ranges properties as the equivalent of an empty one. This is needed for ancient PowerMac "bad" device-trees, and shouldn't be enabled for any other PowerPC platform, otherwise we get some nasty layout of devices in sysfs or even duplication when a set of otherwise identically named devices is created multiple times under a different parent node with no ranges property. This fix is needed for the PowerNV i2c busses to be exposed properly and will fix a number of other embedded cases. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>

2014-11-14 17:55:03 +11:00

drivers/of: Add empty ranges quirk for PA-Semi The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f92dd, "of/base: Fix PowerPC address parsing hack" Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Stable <stable@vger.kernel.org> # v3.18+

2015-03-23 14:16:38 +11:00

of/base: Fix PowerPC address parsing hack We have a historical hack that treats missing ranges properties as the equivalent of an empty one. This is needed for ancient PowerMac "bad" device-trees, and shouldn't be enabled for any other PowerPC platform, otherwise we get some nasty layout of devices in sysfs or even duplication when a set of otherwise identically named devices is created multiple times under a different parent node with no ranges property. This fix is needed for the PowerNV i2c busses to be exposed properly and will fix a number of other embedded cases. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>

2014-11-14 17:55:03 +11:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: fix typo in comment block of of_translate_one() Remove the "not" before "cannot". I am fixing the comment block style while I am here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>

2015-11-30 15:22:37 +09:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: fix typo in comment block of of_translate_one() Remove the "not" before "cannot". I am fixing the comment block style while I am here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>

2015-11-30 15:22:37 +09:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: restrict 'no-ranges' kludge to powerpc Certain Apple machines don't use the ranges property correctly, but the workaround should not be applied on other architectures. This patch disables the workaround for non-powerpc architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:11 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

drivers/of: Add empty ranges quirk for PA-Semi The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f92dd, "of/base: Fix PowerPC address parsing hack" Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Stable <stable@vger.kernel.org> # v3.18+

2015-03-23 14:16:38 +11:00

of/address: Don't throw errors on absent ranges properties The core always tries to translate any "reg" property to construct the platform device names. This results in a pile of "OF: no ranges; cannot translate" errors in dmesg whenever we expose things like i2c devices that cannot directly translate to the MMIO space. Turn this into a pr_debug instead Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-11-14 17:58:23 +11:00

of/address: restrict 'no-ranges' kludge to powerpc Certain Apple machines don't use the ranges property correctly, but the workaround should not be applied on other architectures. This patch disables the workaround for non-powerpc architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:11 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: restrict 'no-ranges' kludge to powerpc Certain Apple machines don't use the ranges property correctly, but the workaround should not be applied on other architectures. This patch disables the workaround for non-powerpc architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:11 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

2012-10-08 19:41:58 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Fix dereferencing node name in debug output to be safe Several locations in the of_address and of_irq code dereference the full_name parameter from a device_node pointer without checking if the pointer is valid. This patch switches to use of_node_full_name() which always checks the pointer. Signed-off-by: Grant Likely <grant.likely@linaro.org>

2013-09-19 11:01:52 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: fix spelling mistake in comment Signed-off-by: Andrew Murray <Andrew.Murray@arm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>

2012-12-13 10:11:23 +00:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: kill off of_can_translate_address of_can_translate_address only checks some conditions for address translation, but does not check other conditions like having range properties. The checks it does do are redundant with __of_address_translate. The only difference is printing a message or not. Since we only have a single caller that does the full translation anyway, just remove of_can_translate_address and quiet the error message. Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Frank Rowand <frank.rowand@sonymobile.com> Reviewed-by: Frank Rowand <frank.rowand@sonymobile.com>

2014-05-07 15:23:56 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Fix dereferencing node name in debug output to be safe Several locations in the of_address and of_irq code dereference the full_name parameter from a device_node pointer without checking if the pointer is valid. This patch switches to use of_node_full_name() which always checks the pointer. Signed-off-by: Grant Likely <grant.likely@linaro.org>

2013-09-19 11:01:52 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/irq: Rename of_irq_map_* functions to of_irq_parse_* The OF irq handling code has been overloading the term 'map' to refer to both parsing the data in the device tree and mapping it to the internal linux irq system. This is probably because the device tree does have the concept of an 'interrupt-map' function for translating interrupt references from one node to another, but 'map' is still confusing when the primary purpose of some of the functions are to parse the DT data. This patch renames all the of_irq_map_* functions to of_irq_parse_* which makes it clear that there is a difference between the parsing phase and the mapping phase. Kernel code can make use of just the parsing or just the mapping support as needed by the subsystem. The patch was generated mechanically with a handful of sed commands. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

2013-09-19 11:22:36 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/irq: Rename of_irq_map_* functions to of_irq_parse_* The OF irq handling code has been overloading the term 'map' to refer to both parsing the data in the device tree and mapping it to the internal linux irq system. This is probably because the device tree does have the concept of an 'interrupt-map' function for translating interrupt references from one node to another, but 'map' is still confusing when the primary purpose of some of the functions are to parse the DT data. This patch renames all the of_irq_map_* functions to of_irq_parse_* which makes it clear that there is a difference between the parsing phase and the mapping phase. Kernel code can make use of just the parsing or just the mapping support as needed by the subsystem. The patch was generated mechanically with a handful of sed commands. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

2013-09-19 11:22:36 -05:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of: Allow busses with #size-cells=0 It's quite legitimate for a DT node to specify #size-cells=0. One example is a node that's used to collect a number of non-memory-mapped devices. In that scenario, there may be multiple child nodes with the same name (type) thus necessitating the use of unit addresses in node names, and reg properties: / { regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; regulator@0 { compatible = "regulator-fixed"; reg = <0>; ... }; regulator@1 { compatible = "regulator-fixed"; reg = <1>; ... }; ... }; }; However, #size-cells=0 prevents translation of reg property values into the parent node's address space. In turn, this triggers the kernel to emit error messages during boot, such as: prom_parse: Bad cell count for /regulators/regulator@0 To prevent printing these error messages for legitimate DT content, a number of changes are made: 1) of_get_address()/of_get_pci_address() are modified only to validate the value of #address-cells, and not #size-cells. 2) of_can_translate_address() is added to indicate whether address translation is possible. 3) of_device_make_bus_id() is modified to name devices based on the translated address only where possible, and otherwise fall back to using the (first cell of the) raw untranslated address. 4) of_device_alloc() is modified to create memory resources for a device only if the address can be translated into the CPU's address space. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>

2012-07-25 17:34:37 -06:00

of/address: Merge all of the bus translation code Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:10 -06:00

of/pci: Add pci_register_io_range() and pci_pio_to_address() Some architectures do not have a simple view of the PCI I/O space and instead use a range of CPU addresses that map to bus addresses. For some architectures these ranges will be expressed by OF bindings in a device tree file. This patch introduces a pci_register_io_range() helper function with a generic implementation that can be used by such architectures to keep track of the I/O ranges described by the PCI bindings. If the PCI_IOBASE macro is not defined, that signals lack of support for PCI and we return an error. In order to retrieve the CPU address associated with an I/O port, a new helper function pci_pio_to_address() is introduced. This will search in the list of ranges registered with pci_register_io_range() and return the CPU address that corresponds to the given port. [arnd: add dummy !CONFIG_OF pci_pio_to_address() to fix build errors] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rob Herring <robh@kernel.org> CC: Grant Likely <grant.likely@linaro.org>

2014-09-29 15:29:21 +01:00

of/address: use atomic allocation in pci_register_io_range() When kzalloc() is called under spin_lock(), GFP_ATOMIC should be used to avoid sleeping allocation. The call tree is: of_pci_range_to_resource() --> pci_register_io_range() <-- takes spin_lock(&io_range_lock); --> kzalloc() Signed-off-by: Jingoo Han <jingoohan1@gmail.com> Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Rob Herring <robh@kernel.org>

2015-06-18 00:12:27 +09:00

of/pci: Add pci_register_io_range() and pci_pio_to_address() Some architectures do not have a simple view of the PCI I/O space and instead use a range of CPU addresses that map to bus addresses. For some architectures these ranges will be expressed by OF bindings in a device tree file. This patch introduces a pci_register_io_range() helper function with a generic implementation that can be used by such architectures to keep track of the I/O ranges described by the PCI bindings. If the PCI_IOBASE macro is not defined, that signals lack of support for PCI and we return an error. In order to retrieve the CPU address associated with an I/O port, a new helper function pci_pio_to_address() is introduced. This will search in the list of ranges registered with pci_register_io_range() and return the CPU address that corresponds to the given port. [arnd: add dummy !CONFIG_OF pci_pio_to_address() to fix build errors] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rob Herring <robh@kernel.org> CC: Grant Likely <grant.likely@linaro.org>

2014-09-29 15:29:21 +01:00

of: implement pci_address_to_pio as weak function Implement pci_address_to_pio as weak function to remove the dependency on asm/prom.h. This is in preparation to make prom.h optional. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Grant Likely <grant.likely@linaro.org>

2013-09-07 14:07:11 -05:00

of/pci: Add pci_register_io_range() and pci_pio_to_address() Some architectures do not have a simple view of the PCI I/O space and instead use a range of CPU addresses that map to bus addresses. For some architectures these ranges will be expressed by OF bindings in a device tree file. This patch introduces a pci_register_io_range() helper function with a generic implementation that can be used by such architectures to keep track of the I/O ranges described by the PCI bindings. If the PCI_IOBASE macro is not defined, that signals lack of support for PCI and we return an error. In order to retrieve the CPU address associated with an I/O port, a new helper function pci_pio_to_address() is introduced. This will search in the list of ranges registered with pci_register_io_range() and return the CPU address that corresponds to the given port. [arnd: add dummy !CONFIG_OF pci_pio_to_address() to fix build errors] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rob Herring <robh@kernel.org> CC: Grant Likely <grant.likely@linaro.org>

2014-09-29 15:29:21 +01:00

of/pci: Fix pci_address_to_pio() conversion of CPU address to I/O port 41f8bba7f555 ("of/pci: Add pci_register_io_range() and pci_pio_to_address()") added support for systems with several I/O ranges described by OF bindings. It modified pci_address_to_pio() look up the io_range for a given CPU physical address, but the conversion was wrong. Fix the conversion of address to I/O port. [bhelgaas: changelog] Fixes: 41f8bba7f555 ("of/pci: Add pci_register_io_range() and pci_pio_to_address()") Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> CC: stable@vger.kernel.org # v3.18+

2015-04-24 17:05:09 +08:00

of/pci: Add pci_register_io_range() and pci_pio_to_address() Some architectures do not have a simple view of the PCI I/O space and instead use a range of CPU addresses that map to bus addresses. For some architectures these ranges will be expressed by OF bindings in a device tree file. This patch introduces a pci_register_io_range() helper function with a generic implementation that can be used by such architectures to keep track of the I/O ranges described by the PCI bindings. If the PCI_IOBASE macro is not defined, that signals lack of support for PCI and we return an error. In order to retrieve the CPU address associated with an I/O port, a new helper function pci_pio_to_address() is introduced. This will search in the list of ranges registered with pci_register_io_range() and return the CPU address that corresponds to the given port. [arnd: add dummy !CONFIG_OF pci_pio_to_address() to fix build errors] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rob Herring <robh@kernel.org> CC: Grant Likely <grant.likely@linaro.org>

2014-09-29 15:29:21 +01:00

of: implement pci_address_to_pio as weak function Implement pci_address_to_pio as weak function to remove the dependency on asm/prom.h. This is in preparation to make prom.h optional. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Grant Likely <grant.likely@linaro.org>

2013-09-07 14:07:11 -05:00

of/pci: Add pci_register_io_range() and pci_pio_to_address() Some architectures do not have a simple view of the PCI I/O space and instead use a range of CPU addresses that map to bus addresses. For some architectures these ranges will be expressed by OF bindings in a device tree file. This patch introduces a pci_register_io_range() helper function with a generic implementation that can be used by such architectures to keep track of the I/O ranges described by the PCI bindings. If the PCI_IOBASE macro is not defined, that signals lack of support for PCI and we return an error. In order to retrieve the CPU address associated with an I/O port, a new helper function pci_pio_to_address() is introduced. This will search in the list of ranges registered with pci_register_io_range() and return the CPU address that corresponds to the given port. [arnd: add dummy !CONFIG_OF pci_pio_to_address() to fix build errors] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rob Herring <robh@kernel.org> CC: Grant Likely <grant.likely@linaro.org>

2014-09-29 15:29:21 +01:00

of: implement pci_address_to_pio as weak function Implement pci_address_to_pio as weak function to remove the dependency on asm/prom.h. This is in preparation to make prom.h optional. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Grant Likely <grant.likely@linaro.org>

2013-09-07 14:07:11 -05:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: Add reg-names property to name an iomem resource Add a reg-names property to allow for reg regions to be reference by name instead of by index. Some devices have multiple register regions which are more naturally referenced by name. If the name is available, use it to name the resource when creating a devices. Otherwise keep the device name. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> [Generalized documentation to be for any -names property] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-12-05 15:23:55 +01:00

of/address: merge of_address_to_resource() Merge common code between PowerPC and Microblaze. This patch also moves the prototype of pci_address_to_pio() out of pci-bridge.h and into prom.h because the only user of pci_address_to_pio() is of_address_to_resource(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: Add reg-names property to name an iomem resource Add a reg-names property to allow for reg regions to be reference by name instead of by index. Some devices have multiple register regions which are more naturally referenced by name. If the name is available, use it to name the resource when creating a devices. Otherwise keep the device name. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> [Generalized documentation to be for any -names property] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-12-05 15:23:55 +01:00

of/address: merge of_address_to_resource() Merge common code between PowerPC and Microblaze. This patch also moves the prototype of pci_address_to_pio() out of pci-bridge.h and into prom.h because the only user of pci_address_to_pio() is of_address_to_resource(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: use proper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which contains integers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-12-01 10:54:46 +01:00

of/address: merge of_address_to_resource() Merge common code between PowerPC and Microblaze. This patch also moves the prototype of pci_address_to_pio() out of pci-bridge.h and into prom.h because the only user of pci_address_to_pio() is of_address_to_resource(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: Add reg-names property to name an iomem resource Add a reg-names property to allow for reg regions to be reference by name instead of by index. Some devices have multiple register regions which are more naturally referenced by name. If the name is available, use it to name the resource when creating a devices. Otherwise keep the device name. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> [Generalized documentation to be for any -names property] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-12-05 15:23:55 +01:00

of/address: merge of_address_to_resource() Merge common code between PowerPC and Microblaze. This patch also moves the prototype of pci_address_to_pio() out of pci-bridge.h and into prom.h because the only user of pci_address_to_pio() is of_address_to_resource(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: Add reg-names property to name an iomem resource Add a reg-names property to allow for reg regions to be reference by name instead of by index. Some devices have multiple register regions which are more naturally referenced by name. If the name is available, use it to name the resource when creating a devices. Otherwise keep the device name. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> [Generalized documentation to be for any -names property] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-12-05 15:23:55 +01:00

of/address: merge of_address_to_resource() Merge common code between PowerPC and Microblaze. This patch also moves the prototype of pci_address_to_pio() out of pci-bridge.h and into prom.h because the only user of pci_address_to_pio() is of_address_to_resource(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: Add of_find_matching_node_by_address helper of_find_matching_node_by_address() can be used to find a device tree node for a device at a specific address. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-07-05 23:42:28 -06:00

of/address: Don't loop forever in of_find_matching_node_by_address(). If the internal call to of_address_to_resource() fails, we end up looping forever in of_find_matching_node_by_address(). This can be caused by a defective device tree, or calling with an incorrect matches argument. Fix by calling of_find_matching_node() unconditionally at the end of the loop. Signed-off-by: David Daney <david.daney@cavium.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>

2015-08-19 13:17:47 -07:00

of/address: Add of_find_matching_node_by_address helper of_find_matching_node_by_address() can be used to find a device tree node for a device at a specific address. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-07-05 23:42:28 -06:00

of/address: Don't loop forever in of_find_matching_node_by_address(). If the internal call to of_address_to_resource() fails, we end up looping forever in of_find_matching_node_by_address(). This can be caused by a defective device tree, or calling with an incorrect matches argument. Fix by calling of_find_matching_node() unconditionally at the end of the loop. Signed-off-by: David Daney <david.daney@cavium.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>

2015-08-19 13:17:47 -07:00

of/address: Add of_find_matching_node_by_address helper of_find_matching_node_by_address() can be used to find a device tree node for a device at a specific address. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-07-05 23:42:28 -06:00

of/address: merge of_address_to_resource() Merge common code between PowerPC and Microblaze. This patch also moves the prototype of pci_address_to_pio() out of pci-bridge.h and into prom.h because the only user of pci_address_to_pio() is of_address_to_resource(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of: address: use resource_size helper that should be the approved way of calculating the size of resources. No functional changes. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-07-22 22:47:21 +03:00

of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of: introduce of_dma_get_range() helper The of_dma_get_range() allows to find "dma-range" property for the specified device and parse it. dma-ranges format: DMA addr (dma_addr) : naddr cells CPU addr (phys_addr_t) : pna cells size : nsize cells Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

2014-04-24 11:30:02 -04:00

of: Provide a function to request and map memory A call to of_iomap does not request the memory region. This patch adds the function of_io_request_and_map which requests the memory region before mapping it. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Rob Herring <robh@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

2014-07-18 11:36:39 +02:00

of: Request and map make argument name constant This patch makes the name argument from of_io_request_and_map constant. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-10-21 18:27:25 +02:00

of: Provide a function to request and map memory A call to of_iomap does not request the memory region. This patch adds the function of_io_request_and_map which requests the memory region before mapping it. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Rob Herring <robh@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

2014-07-18 11:36:39 +02:00

of: introduce of_dma_get_range() helper The of_dma_get_range() allows to find "dma-range" property for the specified device and parse it. dma-ranges format: DMA addr (dma_addr) : naddr cells CPU addr (phys_addr_t) : pna cells size : nsize cells Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

2014-04-24 11:30:02 -04:00

of: introduce of_dma_is_coherent() helper The of_dma_is_coherent() helper parses the given DT device node to see if the "dma-coherent" property is supported and returns true or false accordingly. If the arch is always coherent or always noncoherent, then the default DMA ops has to be specified accordingly. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>

2014-04-24 11:30:03 -04:00

Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next Pull ARM updates from Russell King: - Major clean-up of the L2 cache support code. The existing mess was becoming rather unmaintainable through all the additions that others have done over time. This turns it into a much nicer structure, and implements a few performance improvements as well. - Clean up some of the CP15 control register tweaks for alignment support, moving some code and data into alignment.c - DMA properties for ARM, from Santosh and reviewed by DT people. This adds DT properties to specify bus translations we can't discover automatically, and to indicate whether devices are coherent. - Hibernation support for ARM - Make ftrace work with read-only text in modules - add suspend support for PJ4B CPUs - rework interrupt masking for undefined instruction handling, which allows us to enable interrupts earlier in the handling of these exceptions. - support for big endian page tables - fix stacktrace support to exclude stacktrace functions from the trace, and add save_stack_trace_regs() implementation so that kprobes can record stack traces. - Add support for the Cortex-A17 CPU. - Remove last vestiges of ARM710 support. - Removal of ARM "meminfo" structure, finally converting us solely to memblock to handle the early memory initialisation. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits) ARM: ensure C page table setup code follows assembly code (part II) ARM: ensure C page table setup code follows assembly code ARM: consolidate last remaining open-coded alignment trap enable ARM: remove global cr_no_alignment ARM: remove CPU_CP15 conditional from alignment.c ARM: remove unused adjust_cr() function ARM: move "noalign" command line option to alignment.c ARM: provide common method to clear bits in CPU control register ARM: 8025/1: Get rid of meminfo ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type ARM: 8066/1: correction for ARM patch 8031/2 ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation ARM: 8065/1: remove last use of CONFIG_CPU_ARM710 ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction ARM: 8047/1: rwsem: use asm-generic rwsem implementation ARM: l2c: trial at enabling some Cortex-A9 optimisations ARM: l2c: add warnings for stuff modifying aux_ctrl register values ARM: l2c: print a warning with L2C-310 caches if the cache size is modified ARM: l2c: remove old .set_debug method ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this ...

2014-06-05 15:57:04 -07:00

1028 lines 25 KiB Raw Permalink Normal View History

1028 lines

25 KiB

Raw Permalink Normal View History