kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/clocksource/timer-atmel-pit.c

259 lines
7.2 KiB
Raw Permalink Normal View History

[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: PIT: Follow the general coding rules Replace all masks and bits definitions by matching calls to BIT and GENMASK. While we're at it, also fix a few style issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:14 +02:00
ARM: at91: PIT: Use pr_fmt All the panic messages hardcode the same prefix. Define the pr_fmt macro to unify its definition. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:21 +02:00
ARM: at91: PIT: Follow the general coding rules Replace all masks and bits definitions by matching calls to BIT and GENMASK. While we're at it, also fix a few style issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:14 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: pit add DT support Retreive registers address and IRQ from device tree entry. Called from at91_dt_init_irq() so that timers are up-n-running when timers initialization will occur. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: change error path and interrupts property handling] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-27 11:19:34 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
arm: at91: move pit define to the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-10-30 08:09:09 +08:00
ARM: at91: PIT: Follow the general coding rules Replace all masks and bits definitions by matching calls to BIT and GENMASK. While we're at it, also fix a few style issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:14 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
arm: at91: move pit define to the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-10-30 08:09:09 +08:00
ARM: at91: PIT: Follow the general coding rules Replace all masks and bits definitions by matching calls to BIT and GENMASK. While we're at it, also fix a few style issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:14 +02:00
arm: at91: move pit define to the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-10-30 08:09:09 +08:00
ARM: at91: PIT: Follow the general coding rules Replace all masks and bits definitions by matching calls to BIT and GENMASK. While we're at it, also fix a few style issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:14 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: make pit register base soc independent Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-09-18 22:29:50 +08:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: make pit register base soc independent Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-09-18 22:29:50 +08:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: make pit register base soc independent Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-09-18 22:29:50 +08:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
clocksource/drivers/at91: Fix IO endianness Fix the use of __raw IO accessor with the readl/writel_relaxed() versions to allow the code to be used on a system running in big endian mode. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Linux ARM Kernel <linux-arm-kernel@lists.infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: digetx@gmail.com Cc: hdegoede@redhat.com Cc: laurent.pinchart+renesas@ideasonboard.com Cc: maxime.ripard@free-electrons.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1427746633-9137-7-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-30 22:17:09 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
clocksource/drivers/at91: Fix IO endianness Fix the use of __raw IO accessor with the readl/writel_relaxed() versions to allow the code to be used on a system running in big endian mode. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Linux ARM Kernel <linux-arm-kernel@lists.infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: digetx@gmail.com Cc: hdegoede@redhat.com Cc: laurent.pinchart+renesas@ideasonboard.com Cc: maxime.ripard@free-electrons.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1427746633-9137-7-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-30 22:17:09 +02:00
ARM: at91: make pit register base soc independent Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-09-18 22:29:50 +08:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
clocksource: pass clocksource to read() callback Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 12:24:00 -07:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
clockevents/drivers/atmel: Migrate to new 'set-state' interface Migrate atmel driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-18 16:24:44 +05:30
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
clockevents/drivers/atmel: Migrate to new 'set-state' interface Migrate atmel driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-18 16:24:44 +05:30
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: convert timer suspend/resume to clock_event_device Move at91's timer suspend/resume functions from struct sys_timer at91sam926x_timer into struct clock_event_device pit_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-07 16:32:41 -07:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: convert timer suspend/resume to clock_event_device Move at91's timer suspend/resume functions from struct sys_timer at91sam926x_timer into struct clock_event_device pit_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-07 16:32:41 -07:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: convert timer suspend/resume to clock_event_device Move at91's timer suspend/resume functions from struct sys_timer at91sam926x_timer into struct clock_event_device pit_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-07 16:32:41 -07:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: convert timer suspend/resume to clock_event_device Move at91's timer suspend/resume functions from struct sys_timer at91sam926x_timer into struct clock_event_device pit_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-07 16:32:41 -07:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: convert timer suspend/resume to clock_event_device Move at91's timer suspend/resume functions from struct sys_timer at91sam926x_timer into struct clock_event_device pit_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-07 16:32:41 -07:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: convert timer suspend/resume to clock_event_device Move at91's timer suspend/resume functions from struct sys_timer at91sam926x_timer into struct clock_event_device pit_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-07 16:32:41 -07:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: convert timer suspend/resume to clock_event_device Move at91's timer suspend/resume functions from struct sys_timer at91sam926x_timer into struct clock_event_device pit_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-07 16:32:41 -07:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: convert timer suspend/resume to clock_event_device Move at91's timer suspend/resume functions from struct sys_timer at91sam926x_timer into struct clock_event_device pit_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-07 16:32:41 -07:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
arm/at91: Don't disable irqs in set_next_event and set_mode callbacks on AT91 the timer irq is shared, so the handler might be entered without irqs being disabled. Though this should not happen as the timer irq is registered early, there have been some reports on the mailing list. To make debugging that problem easier next time it pops up a WARN_ON_ONCE is added to the handler if irqs are not off. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-09-21 09:30:09 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
clockevents/drivers/atmel: Migrate to new 'set-state' interface Migrate atmel driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-18 16:24:44 +05:30
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91/pit: add traces in case of error Traces related to IRQ management are useful for timers in case of non-working IRQ subsystem (switch to irq_domain for instance). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-17 11:54:29 +01:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
clockevents/drivers/timer-atmel-pit: Fix typo in structure initialization Reported-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-08-04 11:59:42 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: PIT: use request_irq instead of setup_irq We can use the generic request_irq now to register a timer interrupt handler, instead of the more complex setup_irq. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:22 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91/pit: add traces in case of error Traces related to IRQ management are useful for timers in case of non-working IRQ subsystem (switch to irq_domain for instance). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-17 11:54:29 +01:00
ARM: at91: PIT: Use pr_fmt All the panic messages hardcode the same prefix. Define the pr_fmt macro to unify its definition. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:21 +02:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-16 20:43:49 +01:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
clockevents/drivers/atmel: Migrate to new 'set-state' interface Migrate atmel driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-18 16:24:44 +05:30
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
[ARM] 3949/2: AT91: SAM9 timer driver Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 09:04:47 +01:00
ARM: at91: PIT: Rework probe functions The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:18 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: PIT: Rework probe functions The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:18 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: PIT: Use pr_fmt All the panic messages hardcode the same prefix. Define the pr_fmt macro to unify its definition. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:21 +02:00
ARM: at91: PIT: Rework probe functions The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:18 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: PIT: Rework probe functions The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:18 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: PIT: Rework probe functions The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:18 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: PIT: Use pr_fmt All the panic messages hardcode the same prefix. Define the pr_fmt macro to unify its definition. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:21 +02:00
ARM: at91: PIT: Rework probe functions The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:18 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: PIT: Use pr_fmt All the panic messages hardcode the same prefix. Define the pr_fmt macro to unify its definition. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:21 +02:00
ARM: at91: PIT: Rework probe functions The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:18 +02:00
ARM: at91: PIT: (Almost) remove the global variables The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:23 +02:00
ARM: at91: PIT: Rework probe functions The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-01 11:33:18 +02:00