kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/fs/ocfs2/localalloc.c

1342 lines
34 KiB
Raw Permalink Normal View History

[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Use metadata-specific ocfs2_journal_access_*() functions. The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-17 19:25:01 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: increase the default size of local alloc windows I have observed that the current size of 8M gives us pretty poor fragmentation on multi-threaded workloads which do lots of writes. Generally, I can increase the size of local alloc windows and observe a marked decrease in fragmentation, even up and beyond window sizes of 512 megabytes. This makes sense for a couple reasons - larger local alloc means more room for reservation windows. On multi-node workloads the larger local alloc helps as well because we don't have to do window slides as often. Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no longer used and the comment above it was out of date. To test fragmentation, I used a workload which launched 4 threads that did 4k writes into a series of about 140 alternating files. With resv_level=2, and a 4k/4k file system I observed the following average fragmentation for various localalloc= parameters: localalloc= avg. fragmentation 8 48 32 16 64 10 120 7 On larger cluster sizes, the difference is more dramatic. The new default size top out at 256M, which we'll only get for cluster sizes of 32K and above. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:14 -07:00
ocfs2: Limit default local alloc size within bitmap range. In commit 6b82021b9e91cd689fdffadbcdb9a42597bbe764, we increase our local alloc size and calculate how much megabytes we can get according to group size and volume size. But we also need to check the maximum bits a local alloc block bitmap can have. With a bs=512, cs=32K, local volume with 160G, it calculate 96MB while the maximum local alloc size is only 76M. So the bitmap will overflow and corrupt the system truncate log file. See bug http://oss.oracle.com/bugzilla/show_bug.cgi?id=1262 Signed-off-by: Tao Ma <tao.ma@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-06-09 16:43:05 +08:00
ocfs2: increase the default size of local alloc windows I have observed that the current size of 8M gives us pretty poor fragmentation on multi-threaded workloads which do lots of writes. Generally, I can increase the size of local alloc windows and observe a marked decrease in fragmentation, even up and beyond window sizes of 512 megabytes. This makes sense for a couple reasons - larger local alloc means more room for reservation windows. On multi-node workloads the larger local alloc helps as well because we don't have to do window slides as often. Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no longer used and the comment above it was out of date. To test fragmentation, I used a workload which launched 4 threads that did 4k writes into a series of about 140 alternating files. With resv_level=2, and a 4k/4k file system I observed the following average fragmentation for various localalloc= parameters: localalloc= avg. fragmentation 8 48 32 16 64 10 120 7 On larger cluster sizes, the difference is more dramatic. The new default size top out at 256M, which we'll only get for cluster sizes of 32K and above. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:14 -07:00
ocfs2: ocfs2_group_bitmap_size has to handle old volume. ocfs2_group_bitmap_size has to handle the case when the volume don't have discontiguous block group support. So pass the feature_incompat in and check it. Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-13 14:38:06 +08:00
ocfs2: increase the default size of local alloc windows I have observed that the current size of 8M gives us pretty poor fragmentation on multi-threaded workloads which do lots of writes. Generally, I can increase the size of local alloc windows and observe a marked decrease in fragmentation, even up and beyond window sizes of 512 megabytes. This makes sense for a couple reasons - larger local alloc means more room for reservation windows. On multi-node workloads the larger local alloc helps as well because we don't have to do window slides as often. Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no longer used and the comment above it was out of date. To test fragmentation, I used a workload which launched 4 threads that did 4k writes into a series of about 140 alternating files. With resv_level=2, and a 4k/4k file system I observed the following average fragmentation for various localalloc= parameters: localalloc= avg. fragmentation 8 48 32 16 64 10 120 7 On larger cluster sizes, the difference is more dramatic. The new default size top out at 256M, which we'll only get for cluster sizes of 32K and above. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:14 -07:00
ocfs2: Limit default local alloc size within bitmap range. In commit 6b82021b9e91cd689fdffadbcdb9a42597bbe764, we increase our local alloc size and calculate how much megabytes we can get according to group size and volume size. But we also need to check the maximum bits a local alloc block bitmap can have. With a bs=512, cs=32K, local volume with 160G, it calculate 96MB while the maximum local alloc size is only 76M. So the bitmap will overflow and corrupt the system truncate log file. See bug http://oss.oracle.com/bugzilla/show_bug.cgi?id=1262 Signed-off-by: Tao Ma <tao.ma@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-06-09 16:43:05 +08:00
ocfs2: increase the default size of local alloc windows I have observed that the current size of 8M gives us pretty poor fragmentation on multi-threaded workloads which do lots of writes. Generally, I can increase the size of local alloc windows and observe a marked decrease in fragmentation, even up and beyond window sizes of 512 megabytes. This makes sense for a couple reasons - larger local alloc means more room for reservation windows. On multi-node workloads the larger local alloc helps as well because we don't have to do window slides as often. Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no longer used and the comment above it was out of date. To test fragmentation, I used a workload which launched 4 threads that did 4k writes into a series of about 140 alternating files. With resv_level=2, and a 4k/4k file system I observed the following average fragmentation for various localalloc= parameters: localalloc= avg. fragmentation 8 48 32 16 64 10 120 7 On larger cluster sizes, the difference is more dramatic. The new default size top out at 256M, which we'll only get for cluster sizes of 32K and above. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:14 -07:00
ocfs2: clean up localalloc mount option size parsing This patch pulls the local alloc sizing code into localalloc.c and provides a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged except that I correctly calculate the maximum local alloc size. The old code in ocfs2_parse_options() calculated the max size as: ocfs2_local_alloc_size(sb) * 8 which is correct, in bits. Unfortunately though the option passed in is in megabytes. Ultimately, this bug made no real difference - the shrink code would catch a too-large size and bring it down to something reasonable. Still, it's less than efficient as-is. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:13 -07:00
ocfs2: increase the default size of local alloc windows I have observed that the current size of 8M gives us pretty poor fragmentation on multi-threaded workloads which do lots of writes. Generally, I can increase the size of local alloc windows and observe a marked decrease in fragmentation, even up and beyond window sizes of 512 megabytes. This makes sense for a couple reasons - larger local alloc means more room for reservation windows. On multi-node workloads the larger local alloc helps as well because we don't have to do window slides as often. Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no longer used and the comment above it was out of date. To test fragmentation, I used a workload which launched 4 threads that did 4k writes into a series of about 140 alternating files. With resv_level=2, and a 4k/4k file system I observed the following average fragmentation for various localalloc= parameters: localalloc= avg. fragmentation 8 48 32 16 64 10 120 7 On larger cluster sizes, the difference is more dramatic. The new default size top out at 256M, which we'll only get for cluster sizes of 32K and above. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:14 -07:00
ocfs2: clean up localalloc mount option size parsing This patch pulls the local alloc sizing code into localalloc.c and provides a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged except that I correctly calculate the maximum local alloc size. The old code in ocfs2_parse_options() calculated the max size as: ocfs2_local_alloc_size(sb) * 8 which is correct, in bits. Unfortunately though the option passed in is in megabytes. Ultimately, this bug made no real difference - the shrink code would catch a too-large size and bring it down to something reasonable. Still, it's less than efficient as-is. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:13 -07:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
ocfs2: clean up localalloc mount option size parsing This patch pulls the local alloc sizing code into localalloc.c and provides a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged except that I correctly calculate the maximum local alloc size. The old code in ocfs2_parse_options() calculated the max size as: ocfs2_local_alloc_size(sb) * 8 which is correct, in bits. Unfortunately though the option passed in is in megabytes. Ultimately, this bug made no real difference - the shrink code would catch a too-large size and bring it down to something reasonable. Still, it's less than efficient as-is. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:13 -07:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Track local alloc bits internally Do this instead of tracking absolute local alloc size. This avoids needless re-calculatiion of bits from bytes in localalloc.c. Additionally, the value is now in a more natural unit for internal file system bitmap work. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 14:55:20 -07:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
ocfs2: Track local alloc bits internally Do this instead of tracking absolute local alloc size. This avoids needless re-calculatiion of bits from bytes in localalloc.c. Additionally, the value is now in a more natural unit for internal file system bitmap work. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 14:55:20 -07:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
ocfs2: Track local alloc bits internally Do this instead of tracking absolute local alloc size. This avoids needless re-calculatiion of bits from bytes in localalloc.c. Additionally, the value is now in a more natural unit for internal file system bitmap work. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 14:55:20 -07:00
ocfs2: increase the default size of local alloc windows I have observed that the current size of 8M gives us pretty poor fragmentation on multi-threaded workloads which do lots of writes. Generally, I can increase the size of local alloc windows and observe a marked decrease in fragmentation, even up and beyond window sizes of 512 megabytes. This makes sense for a couple reasons - larger local alloc means more room for reservation windows. On multi-node workloads the larger local alloc helps as well because we don't have to do window slides as often. Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no longer used and the comment above it was out of date. To test fragmentation, I used a workload which launched 4 threads that did 4k writes into a series of about 140 alternating files. With resv_level=2, and a 4k/4k file system I observed the following average fragmentation for various localalloc= parameters: localalloc= avg. fragmentation 8 48 32 16 64 10 120 7 On larger cluster sizes, the difference is more dramatic. The new default size top out at 256M, which we'll only get for cluster sizes of 32K and above. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-05 18:17:14 -07:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Wrap inode block reads in a dedicated function. The ocfs2 code currently reads inodes off disk with a simple ocfs2_read_block() call. Each place that does this has a different set of sanity checks it performs. Some check only the signature. A couple validate the block number (the block read vs di->i_blkno). A couple others check for VALID_FL. Only one place validates i_fs_generation. A couple check nothing. Even when an error is found, they don't all do the same thing. We wrap inode reading into ocfs2_read_inode_block(). This will validate all the above fields, going readonly if they are invalid (they never should be). ocfs2_read_inode_block_full() is provided for the places that want to pass read_block flags. Every caller is passing a struct inode with a valid ip_blkno, so we don't need a separate blkno argument either. We will remove the validation checks from the rest of the code in a later commit, as they are no longer necessary. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-13 14:49:11 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't use MLF* in the file system Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-03 10:24:33 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Don't check for NULL before brelse() This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
2008-10-07 14:25:16 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
ocfs2: Rename ocfs2_meta_[un]lock Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-10-18 15:30:42 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: remove handle argument to ocfs2_start_trans() All callers either pass in NULL directly, or a local variable that is already set to NULL. The internals of ocfs2_start_trans() get a nice cleanup as a result. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 17:26:22 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Use GFP_NOFS in kmalloc during localalloc window move kmalloc() during a localalloc window move can trigger the mm to prune the dcache which inturn can trigger the fs to delete an inode causing it start a recursive transaction. The fix also makes the change in kmalloc during localalloc shutdown just to be safe. Fixes oss bugzilla#901 http://oss.oracle.com/bugzilla/show_bug.cgi?id=901 Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 15:03:59 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Pass struct ocfs2_caching_info to the journal functions. The next step in divorcing metadata I/O management from struct inode is to pass struct ocfs2_caching_info to the journal functions. Thus the journal locks a metadata cache with the cache io_lock function. It also can compare ci_last_trans and ci_created_trans directly. This is a large patch because of all the places we change ocfs2_journal_access..(handle, inode, ...) to ocfs2_journal_access..(handle, INODE_CACHE(inode), ...). Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-02-12 16:41:25 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Make ocfs2_journal_dirty() void. jbd[2]_journal_dirty_metadata() only returns 0. It's been returning 0 since before the kernel moved to git. There is no point in checking this error. ocfs2_journal_dirty() has been faithfully returning the status since the beginning. All over ocfs2, we have blocks of code checking this can't fail status. In the past few years, we've tried to avoid adding these checks, because they are pointless. But anyone who looks at our code assumes they are needed. Finally, ocfs2_journal_dirty() is made a void function. All error checking is removed from other files. We'll BUG_ON() the status of jbd2_journal_dirty_metadata() just in case they change it someday. They won't. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-19 14:13:52 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
ocfs2: pass ocfs2_super * into ocfs2_commit_trans() This sets us up to remove handle->journal. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 16:48:10 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
ocfs2: Don't check for NULL before brelse() This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
2008-10-07 14:25:16 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Rename ocfs2_meta_[un]lock Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-10-18 15:30:42 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: remove kfree() redundant null checks smatch analysis indicates a number of redundant NULL checks before calling kfree(), eg: fs/ocfs2/alloc.c:6138 ocfs2_begin_truncate_log_recovery() info: redundant null check on *tl_copy calling kfree() fs/ocfs2/alloc.c:6755 ocfs2_zero_range_for_truncate() info: redundant null check on pages calling kfree() etc.... [akpm@linux-foundation.org: revert dubious change in ocfs2_begin_truncate_log_recovery()] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:42:44 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
[PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_sem This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: Ingo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:24 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Wrap inode block reads in a dedicated function. The ocfs2 code currently reads inodes off disk with a simple ocfs2_read_block() call. Each place that does this has a different set of sanity checks it performs. Some check only the signature. A couple validate the block number (the block read vs di->i_blkno). A couple others check for VALID_FL. Only one place validates i_fs_generation. A couple check nothing. Even when an error is found, they don't all do the same thing. We wrap inode reading into ocfs2_read_inode_block(). This will validate all the above fields, going readonly if they are invalid (they never should be). ocfs2_read_inode_block_full() is provided for the places that want to pass read_block flags. Every caller is passing a struct inode with a valid ip_blkno, so we don't need a separate blkno argument either. We will remove the validation checks from the rest of the code in a later commit, as they are no longer necessary. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-13 14:49:11 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Use metadata-specific ocfs2_journal_access_*() functions. The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-17 19:25:01 -07:00
ocfs2: Take the inode out of the metadata read/write paths. We are really passing the inode into the ocfs2_read/write_blocks() functions to get at the metadata cache. This commit passes the cache directly into the metadata block functions, divorcing them from the inode. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-02-10 20:00:41 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: remove kfree() redundant null checks smatch analysis indicates a number of redundant NULL checks before calling kfree(), eg: fs/ocfs2/alloc.c:6138 ocfs2_begin_truncate_log_recovery() info: redundant null check on *tl_copy calling kfree() fs/ocfs2/alloc.c:6755 ocfs2_zero_range_for_truncate() info: redundant null check on pages calling kfree() etc.... [akpm@linux-foundation.org: revert dubious change in ocfs2_begin_truncate_log_recovery()] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:42:44 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Don't check for NULL before brelse() This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
2008-10-07 14:25:16 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
[PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_sem This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: Ingo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:24 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
ocfs2: Rename ocfs2_meta_[un]lock Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-10-18 15:30:42 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: remove handle argument to ocfs2_start_trans() All callers either pass in NULL directly, or a local variable that is already set to NULL. The internals of ocfs2_start_trans() get a nice cleanup as a result. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 17:26:22 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: pass ocfs2_super * into ocfs2_commit_trans() This sets us up to remove handle->journal. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 16:48:10 -07:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
ocfs2: Rename ocfs2_meta_[un]lock Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-10-18 15:30:42 -07:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Don't check for NULL before brelse() This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
2008-10-07 14:25:16 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-05 15:42:08 -07:00
ocfs2: Add inode stealing for ocfs2_reserve_new_inode Inode allocation is modified to look in other nodes allocators during extreme out of space situations. We retry our own slot when space is freed back to the global bitmap, or whenever we've allocated more than 1024 inodes from another slot. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-03-05 16:11:46 +08:00
ocfs2: add extent block stealing for ocfs2 v5 This patch add extent block (metadata) stealing mechanism for extent allocation. This mechanism is same as the inode stealing. if no room in slot specific extent_alloc, we will try to allocate extent block from the next slot. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Acked-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-01-25 14:11:06 +08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_sem This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: Ingo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:24 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: don't use handle for locking in allocation functions Instead we record our state on the allocation context structure which all callers already know about and lifetime correctly. This means the reservation functions don't need a handle passed in any more, and we can also take it off the alloc context. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-06 18:34:35 -07:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs A couple places use OCFS2_DEBUG_FS where they really mean CONFIG_OCFS2_DEBUG_FS. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-06-12 22:35:39 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: neaten do_error, ocfs2_error and ocfs2_abort These uses sometimes do and sometimes don't have '\n' terminations. Make the uses consistently use '\n' terminations and remove the newline from the functions. Miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 15:44:51 -07:00
ocfs2: don't use MLF* in the file system Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-03 10:24:33 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
[PATCH] ocfs2: Remove expensive bitmap scanning Enable expensive bitmap scanning only if DEBUG option is enabled. The bitmap scanning quite loads the CPU and on my machine the write throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync improves from 37 MB/s to 45.4 MB/s in local mode... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-13 19:59:33 +01:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: fix inode leak We weren't cleaning up our inode reference on error in ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if need be. Move the code to set the alloc context inode info to the end of the function so we don't have any possibility of passing back a bad pointer. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-05-09 17:34:26 -07:00
ocfs2: Add ac_alloc_slot in ocfs2_alloc_context In inode stealing, we no longer restrict the allocation to happen in the local node. So it is neccessary for us to add a new member in ocfs2_alloc_context to indicate which slot we are using for allocation. We also modify the process of local alloc so that this member can be used there also. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-03-03 17:12:30 +08:00
ocfs2: fix inode leak We weren't cleaning up our inode reference on error in ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if need be. Move the code to set the alloc context inode info to the end of the function so we don't have any possibility of passing back a bad pointer. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-05-09 17:34:26 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Unlock mutex in local alloc failure case The fs was not unlocking the local alloc inode mutex in the code path in which it failed to find a window of free bits in the global bitmap. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-09-21 11:41:43 -07:00
ocfs2: fix inode leak We weren't cleaning up our inode reference on error in ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if need be. Move the code to set the alloc context inode info to the end of the function so we don't have any possibility of passing back a bad pointer. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-05-09 17:34:26 -07:00
ocfs2: Unlock mutex in local alloc failure case The fs was not unlocking the local alloc inode mutex in the code path in which it failed to find a window of free bits in the global bitmap. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-09-21 11:41:43 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-20 14:58:11 -08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Allow smaller allocations during large writes The ocfs2 write code loops through a page much like the block code, except that ocfs2 allocation units can be any size, including larger than page size. Typically it's equal to or larger than page size - most kernels run 4k pages, the minimum ocfs2 allocation (cluster) size. Some changes introduced during 2.6.23 changed the way writes to pages are handled, and inadvertantly broke support for > 4k page size. Instead of just writing one cluster at a time, we now handle the whole page in one pass. This means that multiple (small) seperate allocations might happen in the same pass. The allocation code howver typically optimizes by getting the maximum which was reserved. This triggered a BUG_ON in the extend code where it'd ask for a single bit (for one part of a > 4k page) and get back more than it asked for. Fix this by providing a variant of the high level allocation function which allows the caller to specify a maximum. The traditional function remains and just calls the new one with a maximum determined from the initial reservation. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-09-16 20:10:16 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Pass struct ocfs2_caching_info to the journal functions. The next step in divorcing metadata I/O management from struct inode is to pass struct ocfs2_caching_info to the journal functions. Thus the journal locks a metadata cache with the cache io_lock function. It also can compare ci_last_trans and ci_created_trans directly. This is a large patch because of all the places we change ocfs2_journal_access..(handle, inode, ...) to ocfs2_journal_access..(handle, INODE_CACHE(inode), ...). Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-02-12 16:41:25 -08:00
ocfs2: Use metadata-specific ocfs2_journal_access_*() functions. The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-17 19:25:01 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
[PATCH] ocfs2: le*_add_cpu conversion replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-02-13 00:06:18 +01:00
ocfs2: Make ocfs2_journal_dirty() void. jbd[2]_journal_dirty_metadata() only returns 0. It's been returning 0 since before the kernel moved to git. There is no point in checking this error. ocfs2_journal_dirty() has been faithfully returning the status since the beginning. All over ocfs2, we have blocks of code checking this can't fail status. In the past few years, we've tried to avoid adding these checks, because they are pointless. But anyone who looks at our code assumes they are needed. Finally, ocfs2_journal_dirty() is made a void function. All error checking is removed from other files. We'll BUG_ON() the status of jbd2_journal_dirty_metadata() just in case they change it someday. They won't. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-19 14:13:52 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: free allocated clusters if error occurs after ocfs2_claim_clusters Even if using the same jbd2 handle, we cannot rollback a transaction. So once some error occurs after successfully allocating clusters, the allocated clusters will never be used and it means they are lost. For example, call ocfs2_claim_clusters successfully when expanding a file, but failed in ocfs2_insert_extent. So we need free the allocated clusters if they are not used indeed. Signed-off-by: Zongxun Wang <wangzongxun@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-06 12:04:20 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: use memweight() Use memweight to count the total number of bits set in memory area. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 14:41:03 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: use memweight() Use memweight to count the total number of bits set in memory area. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 14:41:03 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: fix possible uninitialized variable access In ocfs2_local_alloc_find_clear_bits and ocfs2_get_dentry, variable numfound and set may be uninitialized and then used in tracepoint. In ocfs2_xattr_block_get and ocfs2_delete_xattr_in_bucket, variable block_off and xv may be uninitialized and then used in the following logic due to unchecked return value. This patch fixes these possible issues. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 15:43:33 -07:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2/trivial: Code cleanup for allocation reservation. Two tiny cleanup for allocation reservation. 1. Remove some extra codes in ocfs2_local_alloc_find_clear_bits. 2. Remove an unuseful variables in ocfs2_find_resv_lhs. Signed-off-by: Tao Ma <tao.ma@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-06 16:46:46 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2/trivial: Code cleanup for allocation reservation. Two tiny cleanup for allocation reservation. 1. Remove some extra codes in ocfs2_local_alloc_find_clear_bits. 2. Remove an unuseful variables in ocfs2_find_resv_lhs. Signed-off-by: Tao Ma <tao.ma@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-06 16:46:46 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
ocfs2: Remove ENTRY from masklog. ENTRY is used to record the entry of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. So for mlog_entry_void, we just remove it. for mlog_entry(...), we replace it with mlog(0,...), and they will be replace by trace event later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21 11:10:44 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
ocfs2: don't use MLF* in the file system Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-03 10:24:33 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Clear undo bits when local alloc is freed When the local alloc file changes windows, unused bits are freed back to the global bitmap. By defnition, those bits can not be in use by any file. Also, the local alloc will never have been able to allocate those bits if they were part of a previous truncate. Therefore it makes sense that we should clear unused local alloc bits in the undo buffer so that they can be used immediatly. [ Modified to call it ocfs2_release_clusters() -- Joel ] Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-11 18:31:09 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
[PATCH] Fix numerous kcalloc() calls, convert to kzalloc() All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:52 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
ocfs2: ac_bits_wanted should be local_alloc_bits when returns -ENOSPC There is an issue in reserving and claiming space for localalloc, When localalloc space is not enough, it would claim space from global_bitmap. And if there is not enough free space in global_bitmap, the size of claiming space would set to half of orignal size and retry. The issue is as follows: osb->local_alloc_bits is set to half of orignal size in ocfs2_recalc_la_window(), but ac->ac_bits_wanted is set to osb->local_alloc_default_bits which is not changed. localalloc always reserves and claims local_alloc_default_bits space and returns ENOSPC. So, ac->ac_bits_wanted should be osb->local_alloc_bits which would be changed. Signed-off-by: Younger Liu <younger.liu@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jeff Liu <jeff.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 14:19:47 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
ocfs2: allocation hints Record the most recently used allocation group on the allocation context, so that subsequent allocations can attempt to optimize for contiguousness. Local alloc especially should benefit from this as the current chain search tends to let it spew across the disk. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-05 16:41:00 -04:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: ocfs2_claim_*() don't need an ocfs2_super argument. They all take an ocfs2_alloc_context, which has the allocation inode. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-05-06 13:59:06 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
ocfs2: ac_bits_wanted should be local_alloc_bits when returns -ENOSPC There is an issue in reserving and claiming space for localalloc, When localalloc space is not enough, it would claim space from global_bitmap. And if there is not enough free space in global_bitmap, the size of claiming space would set to half of orignal size and retry. The issue is as follows: osb->local_alloc_bits is set to half of orignal size in ocfs2_recalc_la_window(), but ac->ac_bits_wanted is set to osb->local_alloc_default_bits which is not changed. localalloc always reserves and claims local_alloc_default_bits space and returns ENOSPC. So, ac->ac_bits_wanted should be osb->local_alloc_bits which would be changed. Signed-off-by: Younger Liu <younger.liu@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jeff Liu <jeff.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 14:19:47 -07:00
ocfs2: ocfs2_claim_*() don't need an ocfs2_super argument. They all take an ocfs2_alloc_context, which has the allocation inode. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-05-06 13:59:06 +08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation hints Record the most recently used allocation group on the allocation context, so that subsequent allocations can attempt to optimize for contiguousness. Local alloc especially should benefit from this as the current chain search tends to let it spew across the disk. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-06-05 16:41:00 -04:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: allocation reservations This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-12-07 13:10:48 -08:00
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 18:11:45 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: throttle back local alloc when low on disk space Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-28 18:02:53 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: remove handle argument to ocfs2_start_trans() All callers either pass in NULL directly, or a local variable that is already set to NULL. The internals of ocfs2_start_trans() get a nice cleanup as a result. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 17:26:22 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Use GFP_NOFS in kmalloc during localalloc window move kmalloc() during a localalloc window move can trigger the mm to prune the dcache which inturn can trigger the fs to delete an inode causing it start a recursive transaction. The fix also makes the change in kmalloc during localalloc shutdown just to be safe. Fixes oss bugzilla#901 http://oss.oracle.com/bugzilla/show_bug.cgi?id=901 Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 15:03:59 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Pass struct ocfs2_caching_info to the journal functions. The next step in divorcing metadata I/O management from struct inode is to pass struct ocfs2_caching_info to the journal functions. Thus the journal locks a metadata cache with the cache io_lock function. It also can compare ci_last_trans and ci_created_trans directly. This is a large patch because of all the places we change ocfs2_journal_access..(handle, inode, ...) to ocfs2_journal_access..(handle, INODE_CACHE(inode), ...). Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-02-12 16:41:25 -08:00
ocfs2: Use metadata-specific ocfs2_journal_access_*() functions. The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-17 19:25:01 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Make ocfs2_journal_dirty() void. jbd[2]_journal_dirty_metadata() only returns 0. It's been returning 0 since before the kernel moved to git. There is no point in checking this error. ocfs2_journal_dirty() has been faithfully returning the status since the beginning. All over ocfs2, we have blocks of code checking this can't fail status. In the past few years, we've tried to avoid adding these checks, because they are pointless. But anyone who looks at our code assumes they are needed. Finally, ocfs2_journal_dirty() is made a void function. All error checking is removed from other files. We'll BUG_ON() the status of jbd2_journal_dirty_metadata() just in case they change it someday. They won't. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-19 14:13:52 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: pass ocfs2_super * into ocfs2_commit_trans() This sets us up to remove handle->journal. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-10-09 16:48:10 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Don't check for NULL before brelse() This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
2008-10-07 14:25:16 -07:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: remove kfree() redundant null checks smatch analysis indicates a number of redundant NULL checks before calling kfree(), eg: fs/ocfs2/alloc.c:6138 ocfs2_begin_truncate_log_recovery() info: redundant null check on *tl_copy calling kfree() fs/ocfs2/alloc.c:6755 ocfs2_zero_range_for_truncate() info: redundant null check on pages calling kfree() etc.... [akpm@linux-foundation.org: revert dubious change in ocfs2_begin_truncate_log_recovery()] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:42:44 -08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00
ocfs2: Remove EXIT from masklog. mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
[PATCH] OCFS2: The Second Oracle Cluster Filesystem The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2005-12-15 14:31:24 -08:00