kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/lib/test_rhashtable.c

406 lines
9.7 KiB
Raw Permalink Normal View History

rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: Allow other tasks to be scheduled in large lookup loops Depending on system speed, the large lookup/insert/delete loops of the testsuite can take a considerable amount of time to complete causing watchdog warnings to appear. Allow other tasks to be scheduled throughout the loops. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 10:52:48 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: Do not allocate individual test objects By far the most expensive part of the selftest was the allocation of entries. Using a static array allows to measure the rhashtable operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:43 +00:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
test_rhashtable: Use inlined rhashtable interface This patch converts test_rhashtable to the inlined rhashtable interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 21:57:04 +11:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
test_rhashtable: Use inlined rhashtable interface This patch converts test_rhashtable to the inlined rhashtable interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 21:57:04 +11:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Get rid of ptr in test_obj structure This only blows up the size of the test structure for no gain in test coverage. Reduces size of test_obj from 24 to 16 bytes. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:42 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: Allow other tasks to be scheduled in large lookup loops Depending on system speed, the large lookup/insert/delete loops of the testsuite can take a considerable amount of time to complete causing watchdog warnings to appear. Allow other tasks to be scheduled throughout the loops. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 10:52:48 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: Do not allocate individual test objects By far the most expensive part of the selftest was the allocation of entries. Using a static array allows to measure the rhashtable operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:43 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: Use inlined rhashtable interface This patch converts test_rhashtable to the inlined rhashtable interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 21:57:04 +11:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable-test: Do not allocate individual test objects By far the most expensive part of the selftest was the allocation of entries. Using a static array allows to measure the rhashtable operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:43 +00:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable: Allow other tasks to be scheduled in large lookup loops Depending on system speed, the large lookup/insert/delete loops of the testsuite can take a considerable amount of time to complete causing watchdog warnings to appear. Allow other tasks to be scheduled throughout the loops. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 10:52:48 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable: Allow other tasks to be scheduled in large lookup loops Depending on system speed, the large lookup/insert/delete loops of the testsuite can take a considerable amount of time to complete causing watchdog warnings to appear. Allow other tasks to be scheduled throughout the loops. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 10:52:48 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: don't allocate ht structure on stack in test_rht_init With object runtime debugging enabled, the rhashtable test suite will rightfully throw a warning "ODEBUG: object is on stack, but not annotated" from rhashtable_init(). This is because run_work is (correctly) being initialized via INIT_WORK(), and not annotated by INIT_WORK_ONSTACK(). Meaning, rhashtable_init() is okay as is, we just need to move ht e.g., into global scope. It never triggered anything, since test_rhashtable is rather a controlled environment and effectively runs to completion, so that stack memory is not vanishing underneath us, we shouldn't confuse any testers with it though. Fixes: 7e1e77636e36 ("lib: Resizable, Scalable, Concurrent Hash Table") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 21:14:21 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: Do not allocate individual test objects By far the most expensive part of the selftest was the allocation of entries. Using a static array allows to measure the rhashtable operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:43 +00:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Fix 64bit division A 64bit division went in unnoticed. Use do_div() to accomodate non 64bit architectures. Reported-by: kbuild test robot Fixes: 1aa661f5c3df ("rhashtable-test: Measure time to insert, remove & traverse entries") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05 02:27:02 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: allow to unload test module There's no good reason why to disallow unloading of the rhashtable test case module. Commit 9d6dbe1bbaf8 moved the code from a boot test into a stand-alone module, but only converted the subsys_initcall() handler into a module_init() function without a related exit handler, and thus preventing the test module from unloading. Fixes: 9d6dbe1bbaf8 ("rhashtable: Make selftest modular") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 00:53:39 +01:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: allow to unload test module There's no good reason why to disallow unloading of the rhashtable test case module. Commit 9d6dbe1bbaf8 moved the code from a boot test into a stand-alone module, but only converted the subsys_initcall() handler into a module_init() function without a related exit handler, and thus preventing the test module from unloading. Fixes: 9d6dbe1bbaf8 ("rhashtable: Make selftest modular") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 00:53:39 +01:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00