kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/net/wireless/mesh.c

279 lines
7.5 KiB
Raw Permalink Normal View History

cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-15 11:47:34 -04:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
nl80211: New notification to discover mesh peer candidates. Notify userspace when a beacon/presp is received from a suitable mesh peer candidate for whom no sta information exists. Userspace can then decide to create a sta info for the candidate. If userspace is not ready to authenticate the peer right away, it can create the sta info with the authenticated flag unset and set it later. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07 15:08:34 -07:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
{nl,cfg,mac}80211: let userspace set RANN interval Allow userspace to set Root Announcement Interval for our mesh interface. Also, RANN interval is now in proper units of TUs. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09 16:45:10 -07:00
{nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout Add the mesh configuration parameters dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout to be used by proactive PREQ mechanism. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14 02:06:06 +08:00
{nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationInterval As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14 02:06:10 +08:00
{nl,cfg}80211: make peer link expiration time configurable If a STA has a peer that it hasn't seen any tx activity from for a certain length of time, the peer link is expired. This means the inactive STA is removed from the list of peers and that STA is not considered a peer again unless it re-peers. Previously, this inactivity time was always 30 minutes. Now, add it to the mesh configuration and allow it to be configured. Retain 30 minutes as a default value. Signed-off-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03 09:53:39 -07:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
{nl,cfg,mac}80211: implement dot11MeshHWMPperrMinInterval As per 802.11mb 13.9.11.3 Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-24 17:15:24 -08:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
{nl,cfg,mac}80211: Implement RSSI threshold for mesh peering Mesh peer links are established only if average rssi of the peer candidate satisfies the threshold. This is not in 802.11s specification but was requested by David Fulgham, an open80211s user. This is a way to avoid marginal peer links with stations that are barely within range. This patch adds a new mesh configuration parameter, mesh_rssi_threshold. This feature is supported only for hardwares that report signal in dBm. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-28 17:04:08 -08:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
{nl,cfg}80211: Support for mesh synchronization Report Toffset to userspace. Let userspace select the mesh synchronization method. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-31 11:31:33 -07:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
{cfg,nl,mac}80211: set beacon interval and DTIM period on mesh join Move the default mesh beacon interval and DTIM period to cfg80211 and make them accessible to nl80211. This enables setting both values when joining an MBSS. Previously the DTIM parameter was not set by mac80211 so the driver's default value was used. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-07 16:04:51 +01:00
{cfg,nl}80211: mesh power mode primitives and userspace access Add the nl80211_mesh_power_mode enumeration which holds possible values for the mesh power mode. These modes are unknown, active, light sleep and deep sleep. Add power_mode entry to the mesh config structure to hold the user-configured default mesh power mode. This value will be used for new peer links. Add the dot11MeshAwakeWindowDuration value to the mesh config. The awake window is a duration in TU describing how long the STA will stay awake after transmitting its beacon in PS mode. Add access routines to: - get/set local link-specific power mode (STA) - get remote STA's link-specific power mode (STA) - get remote STA's non-peer power mode (STA) - get/set default mesh power mode (mesh config) - get/set mesh awake window duration (mesh config) All config changes may be done at mesh runtime and take effect immediately. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> [fix commit message line length, error handling in set station] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-07 16:04:52 +01:00
{cfg,nl,mac}80211: set beacon interval and DTIM period on mesh join Move the default mesh beacon interval and DTIM period to cfg80211 and make them accessible to nl80211. This enables setting both values when joining an MBSS. Previously the DTIM parameter was not set by mac80211 so the driver's default value was used. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-07 16:04:51 +01:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
{nl,cfg}80211: Support for mesh synchronization Report Toffset to userspace. Let userspace select the mesh synchronization method. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-31 11:31:33 -07:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
{nl,cfg,mac}80211: implement dot11MeshHWMPperrMinInterval As per 802.11mb 13.9.11.3 Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-24 17:15:24 -08:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
{nl,cfg,mac}80211: let userspace set RANN interval Allow userspace to set Root Announcement Interval for our mesh interface. Also, RANN interval is now in proper units of TUs. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09 16:45:10 -07:00
{nl,cfg,mac}80211: let userspace make meshif mesh gate Allow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute, which will advertise this mesh node as being a mesh gate. NL80211_HWMP_ROOTMODE must be set or this will do nothing. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09 16:45:11 -07:00
{nl,cfg,mac}80211: Add support of setting non-forwarding entity in Mesh A mesh node that joins the mesh network is by default a forwarding entity. This patch allows the mesh node to set as non-forwarding entity. Whenever dot11MeshForwarding is set to 0, the mesh node can prevent itself from forwarding the traffic which is not destined to him. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-21 01:02:16 +08:00
{nl,cfg,mac}80211: Implement RSSI threshold for mesh peering Mesh peer links are established only if average rssi of the peer candidate satisfies the threshold. This is not in 802.11s specification but was requested by David Fulgham, an open80211s user. This is a way to avoid marginal peer links with stations that are barely within range. This patch adds a new mesh configuration parameter, mesh_rssi_threshold. This feature is supported only for hardwares that report signal in dBm. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-28 17:04:08 -08:00
{nl,cfg,mac}80211: Allow user to see/configure HT protection mode This patch introduces a new mesh configuration parameter "ht_opmode" and will allow user to check the current HT protection mode selected. Users could configure the protection mode by the command "iw mesh_iface set mesh_param mesh_ht_protection_mode=2". The default protection mode of mesh is set to non-HT mixed mode. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-30 14:20:32 -07:00
{nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout Add the mesh configuration parameters dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout to be used by proactive PREQ mechanism. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14 02:06:06 +08:00
{nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationInterval As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14 02:06:10 +08:00
{cfg,nl}80211: mesh power mode primitives and userspace access Add the nl80211_mesh_power_mode enumeration which holds possible values for the mesh power mode. These modes are unknown, active, light sleep and deep sleep. Add power_mode entry to the mesh config structure to hold the user-configured default mesh power mode. This value will be used for new peer links. Add the dot11MeshAwakeWindowDuration value to the mesh config. The awake window is a duration in TU describing how long the STA will stay awake after transmitting its beacon in PS mode. Add access routines to: - get/set local link-specific power mode (STA) - get remote STA's link-specific power mode (STA) - get remote STA's non-peer power mode (STA) - get/set default mesh power mode (mesh config) - get/set mesh awake window duration (mesh config) All config changes may be done at mesh runtime and take effect immediately. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> [fix commit message line length, error handling in set station] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-07 16:04:52 +01:00
{nl,cfg}80211: make peer link expiration time configurable If a STA has a peer that it hasn't seen any tx activity from for a certain length of time, the peer link is expired. This means the inactive STA is removed from the list of peers and that STA is not considered a peer again unless it re-peers. Previously, this inactivity time was always 30 minutes. Now, add it to the mesh configuration and allow it to be configured. Retain 30 minutes as a default value. Signed-off-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03 09:53:39 -07:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
mac80211: Let userspace enable and configure vendor specific path selection. Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 17:37:49 -08:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
{nl,cfg}80211: Support for mesh synchronization Report Toffset to userspace. Let userspace select the mesh synchronization method. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-31 11:31:33 -07:00
mac80211: Let userspace enable and configure vendor specific path selection. Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 17:37:49 -08:00
cfg80211: Userspace may inform kernel of mesh auth method. Authentication takes place in userspace, but the beacon is generated in the kernel. Allow userspace to inform the kernel of the authentication method so the appropriate mesh config IE can be set prior to beacon generation when joining the MBSS. Signed-off-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-08 11:45:59 -07:00
nl80211: rename NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE To NL80211_MESH_SETUP_IE. This reflects our ability to insert any ie into a mesh beacon, not simply path selection ies. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07 15:08:27 -07:00
mac80211: ignore peers if security is enabled for this mesh Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07 15:08:29 -07:00
nl80211: explicit userspace MPM Secure mesh had the implicit requirement that the Mesh Peering Management entity be in userspace. However userspace might want to implement an open MPM as well, so specify a mesh setup parameter to indicate this. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-04 13:06:10 -08:00
{cfg,nl,mac}80211: set beacon interval and DTIM period on mesh join Move the default mesh beacon interval and DTIM period to cfg80211 and make them accessible to nl80211. This enables setting both values when joining an MBSS. Previously the DTIM parameter was not set by mac80211 so the driver's default value was used. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-07 16:04:51 +01:00
mac80211: Let userspace enable and configure vendor specific path selection. Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 17:37:49 -08:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211/nl80211: Add userspace authentication flag to mesh setup During mesh setup, use NL80211_MESH_SETUP_USERSPACE_AUTH flag to create a secure mesh and route management frames to userspace. Also, NL80211_CMD_GET_WIPHY now returns a flag NL80211_SUPPORT_MESH_AUTH if the wiphy's mesh implementation supports routing of mesh auth frames to userspace. This is useful for forward compatibility between old kernels and new userspace tools. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07 15:08:28 -07:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
mac80211: Let userspace enable and configure vendor specific path selection. Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 17:37:49 -08:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: consolidate passive-scan and no-ibss flags These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21 19:22:25 +02:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: fix channel error on mesh join Fix an error on mesh join when no channel has been explicitly set beforehand. Also remove a double semicolon. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-03 11:23:37 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
{nl,mac,cfg}80211: Allow user to configure basic rates for mesh Currently mesh uses mandatory rates as the default basic rates. Allow basic rates to be configured during mesh join. Basic rates are applied only if channel is also provided with mesh join command. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [some whitespace fixes, refuse basic rates w/o channel] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03 10:33:36 -07:00
cfg80211/mac80211: get mandatory rates based on scan width Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:54 +02:00
{nl,mac,cfg}80211: Allow user to configure basic rates for mesh Currently mesh uses mandatory rates as the default basic rates. Allow basic rates to be configured during mesh join. Basic rates are applied only if channel is also provided with mesh join command. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [some whitespace fixes, refuse basic rates w/o channel] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03 10:33:36 -07:00
cfg80211/mac80211: get mandatory rates based on scan width Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-08 16:55:54 +02:00
{nl,mac,cfg}80211: Allow user to configure basic rates for mesh Currently mesh uses mandatory rates as the default basic rates. Allow basic rates to be configured during mesh join. Basic rates are applied only if channel is also provided with mesh join command. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [some whitespace fixes, refuse basic rates w/o channel] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03 10:33:36 -07:00
cfg80211: Enable GO operation on additional channels Allow GO operation on a channel marked with IEEE80211_CHAN_GO_CONCURRENT iff there is an active station interface that is associated to an AP operating on the same channel in the 2 GHz band or the same UNII band (in the 5 GHz band). This relaxation is not allowed if the channel is marked with IEEE80211_CHAN_RADAR. Note that this is a permissive approach to the FCC definitions, that require a clear assessment that the device operating the AP is an authorized master, i.e., with radar detection and DFS capabilities. It is assumed that such restrictions are enforced by user space. Furthermore, it is assumed, that if the conditions that allowed for the operation of the GO on such a channel change, i.e., the station interface disconnected from the AP, it is the responsibility of user space to evacuate the GO from the channel. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-23 09:13:01 +02:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
mac80211: Let userspace enable and configure vendor specific path selection. Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 17:37:49 -08:00
cfg80211: consider existing DFS interfaces It was possible to break interface combinations in the following way: combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 With the above interface combinations it was possible to: step 1. start AP on DFS channel by matching combo 2 step 2. start AP on non-DFS channel by matching combo 1 This was possible beacuse (step 2) did not consider if other interfaces require radar detection. The patch changes how cfg80211 tracks channels - instead of channel itself now a complete chandef is stored. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-29 14:22:27 +01:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
mac80211: Let userspace enable and configure vendor specific path selection. Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 17:37:49 -08:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: add channel tracking for AP and mesh We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:46:58 +02:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: clarify set_channel APIs Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06 08:18:22 +02:00
nl80211/cfg80211: support VHT channel configuration Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 23:14:50 +01:00
cfg80211: clarify set_channel APIs Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06 08:18:22 +02:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: add channel tracking for AP and mesh We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:46:58 +02:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: add channel tracking for AP and mesh We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:46:58 +02:00
cfg80211: consider existing DFS interfaces It was possible to break interface combinations in the following way: combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 With the above interface combinations it was possible to: step 1. start AP on DFS channel by matching combo 2 step 2. start AP on non-DFS channel by matching combo 1 This was possible beacuse (step 2) did not consider if other interfaces require radar detection. The patch changes how cfg80211 tracks channels - instead of channel itself now a complete chandef is stored. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-29 14:22:27 +01:00
cfg80211: add channel tracking for AP and mesh We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:46:58 +02:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: pass a channel definition struct Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-08 21:25:48 +01:00
cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 23:50:20 +02:00
cfg80211: export interface stopping function This exports a new cfg80211_stop_iface() function. This is intended for driver internal interface combination management and channel switching. Due to locking issues (it re-enters driver) the call is asynchronous and uses cfg80211 event list/worker. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09 15:11:01 +02:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211: add wrappers for registered_device_ops This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27 17:19:42 +03:00
cfg80211: add channel tracking for AP and mesh We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:46:58 +02:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00
cfg80211: consider existing DFS interfaces It was possible to break interface combinations in the following way: combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 With the above interface combinations it was possible to: step 1. start AP on DFS channel by matching combo 2 step 2. start AP on non-DFS channel by matching combo 1 This was possible beacuse (step 2) did not consider if other interfaces require radar detection. The patch changes how cfg80211 tracks channels - instead of channel itself now a complete chandef is stored. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-29 14:22:27 +01:00
cfg80211: Add support for QoS mapping This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 23:01:30 -08:00
cfg80211: add channel tracking for AP and mesh We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29 12:46:58 +02:00
cfg80211/mac80211: add mesh join/leave commands Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-03 09:20:44 +01:00