kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/block/cciss.h

435 lines
11 KiB
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: Use one scan thread per controller and fix hang during rmmod Replace the use of one scan kthread per controller with one per driver. Use a queue to hold a list of controllers that need to be rescanned with routines to add and remove controllers from the queue. Fix locking and completion handling to prevent a hang during rmmod. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-17 13:46:58 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: separate error processing and command retrying code in sendcmd_withirq_core() Separate the error processing from sendcmd_withirq_core from the code which retries commands. The rationale for this is that the SCSI error handling code can then be made to use sendcmd_withirq_core, but avoid retrying commands. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-08 16:05:56 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add cciss driver sysfs entries Add sysfs entries to the cciss driver needed for the dm/multipath tools. A file for vendor, model, rev, and unique_id is added for each logical drive under directory /sys/bus/pci/devices/<dev>/ccissX/cXdY. Where X = the controller (or host) number and Y is the logical drive number. A link from /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY to /sys/block/cciss!cXdY/device is also created. A bus is created in /sys/bus/cciss. A link is created from the pci ccissX entry to /sys/bus/cciss/devices/ccissX. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02 14:48:39 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: make interrupt access methods return type bool Change the return type of our interrupt access routines to bool from unsigned long. It makes more sense that way. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:04 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: Preserve all 8 bytes of LUN ID for logical drives. Preserve all 8 bytes of the LunID field returned by CCISS_REPORT_LOGICAL instead of only saving 4 bytes. This fixes a bug with logical volume addressing encountered on an MSA2012. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-17 13:48:00 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] cciss per disk queue This patch adds per disk queue functionality to cciss. Sometime back I submitted a patch but it looks like only part of what I needed. In the 2.6 kernel if we have more than one logical volume the driver will Oops during rmmod. It seems all of the queues actually point back to the same queue. So after deleting the first volume you hit a null pointer on the second one. This has been tested in our labs. There is no difference in performance, it just fixes the Oops. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 01:07:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] cciss: new disk register/deregister routines This patch removes a couple of functions dealing with configuration and replaces them with new functions. This implementation fixes some bugs associated with the ACUXE. It also allows a logical volume to be removed from the middle without deleting all volumes behind it. If a user has 5 logical volumes and decides he wants to reconfigure volume number 3, he can now do that without removing volumes 4 & 5 first. This code has been tested in our labs against all application software. Signed-off-by: Chase Maupin <chase.maupin@hp.com> Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 01:25:22 -07:00
cciss: add cciss driver sysfs entries Add sysfs entries to the cciss driver needed for the dm/multipath tools. A file for vendor, model, rev, and unique_id is added for each logical drive under directory /sys/bus/pci/devices/<dev>/ccissX/cXdY. Where X = the controller (or host) number and Y is the logical drive number. A link from /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY to /sys/block/cciss!cXdY/device is also created. A bus is created in /sys/bus/cciss. A link is created from the pci ccissX entry to /sys/bus/cciss/devices/ccissX. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02 14:48:39 +02:00
cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Dynamically allocate the drive_info_struct for each logical drive. This reduces the size of the per-hba ctlr_info structure from 106936 bytes to 8132 bytes. That's on 32-bit systems. On 64-bit systems, the improvement is even bigger. Without this, the ctlr_info struct is so big that the driver won't even load on a 64 bit system if CISS_MAX_LUN was at it's current setting of 1024 logical drives. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-17 13:48:31 -05:00
cciss: add cciss driver sysfs entries Add sysfs entries to the cciss driver needed for the dm/multipath tools. A file for vendor, model, rev, and unique_id is added for each logical drive under directory /sys/bus/pci/devices/<dev>/ccissX/cXdY. Where X = the controller (or host) number and Y is the logical drive number. A link from /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY to /sys/block/cciss!cXdY/device is also created. A bus is created in /sys/bus/cciss. A link is created from the pci ccissX entry to /sys/bus/cciss/devices/ccissX. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02 14:48:39 +02:00
cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Dynamically allocate the drive_info_struct for each logical drive. This reduces the size of the per-hba ctlr_info structure from 106936 bytes to 8132 bytes. That's on 32-bit systems. On 64-bit systems, the improvement is even bigger. Without this, the ctlr_info struct is so big that the driver won't even load on a 64 bit system if CISS_MAX_LUN was at it's current setting of 1024 logical drives. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-17 13:48:31 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: Add enhanced scatter-gather support. cciss: Add enhanced scatter-gather support. For controllers which supported, more than 512 scatter-gather elements per command may be used, and the max transfer size can be increased to 8192 blocks. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-12 12:50:01 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: remove C99-style comments Some cleanup before the header file split-out so we don't propagate this style into new files. Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-17 16:53:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] cciss: increase number of commands on controller Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds. Most Smart Array controllers can support up to 1024 commands but the E200 family can only support 128. To prevent annoying "fifo full" messages we define nr_cmds on a per controller basis by adding it the product table. Signed-off-by: Mike Miller <mike.miller@hp.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06 20:35:01 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: Add enhanced scatter-gather support. cciss: Add enhanced scatter-gather support. For controllers which supported, more than 512 scatter-gather elements per command may be used, and the max transfer size can be increased to 8192 blocks. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-12 12:50:01 -06:00
cciss: simplify scatter gather code cciss: simplify scatter gather code. Instead of allocating an array of pointers to a structure containing an SGDescriptor structure, and two other elements that aren't really used, just allocate SGDescriptor structs. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 16:01:27 -06:00
cciss: Add enhanced scatter-gather support. cciss: Add enhanced scatter-gather support. For controllers which supported, more than 512 scatter-gather elements per command may be used, and the max transfer size can be increased to 8192 blocks. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-12 12:50:01 -06:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
[PATCH] cciss: adds MSI and MSI-X support This creates a new function, cciss_interrupt_mode called from cciss_pci_init. This function determines what type of interrupt vector to use, i.e., MSI, MSI-X, or IO-APIC. One noticeable difference is changing the interrupt field of the controller struct to an array of 4 unsigned ints. The Smart Array HW is capable of generating 4 distinct interrupts depending on the transport method in use during operation. These are: #define DOORBELL_INT 0 Used to notify the contoller of configuration updates. We only use this feature when in polling mode. #define PERF_MODE_INT 0 Used when the controller is in Performant Mode. #define SIMPLE_MODE_INT 2 Used when the controller is in Simple Mode (current Linux implementation). #define MEMQ_INT_MODE 3 Not used. When using IO-APIC interrupts these 4 lines are OR'ed together so when any one fires an interrupt an is generated. In MSI or MSI-X mode this hardware OR'ing is ignored. We must register for our interrupt depending on what mode the controller is running. For Linux we use SIMPLE_MODE_INT exclusively at this time. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 01:03:50 -08:00
cciss: Adds simple mode functionality Signed-off-by: Joseph Handzik <joseph.t.handzik@beardog.cce.hp.com> Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-08 11:40:15 +02:00
[PATCH] cciss: set sector_size to 2048 for performance Change the blk_queue_max_sectors from 512 to 2048. This helps increase performance. [akpm@osdl.org: s/sector_size/max_sectors/] Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06 20:35:06 -08:00
[PATCH] cciss: support for >2TB logical volumes Add support for logical volumes >2TB. All SAS/SATA controllers support large volumes. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:27:23 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: remove C99-style comments Some cleanup before the header file split-out so we don't propagate this style into new files. Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-17 16:53:31 -07:00
cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Dynamically allocate the drive_info_struct for each logical drive. This reduces the size of the per-hba ctlr_info structure from 106936 bytes to 8132 bytes. That's on 32-bit systems. On 64-bit systems, the improvement is even bigger. Without this, the ctlr_info struct is so big that the driver won't even load on a 64 bit system if CISS_MAX_LUN was at it's current setting of 1024 logical drives. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-17 13:48:31 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: reinstate proper FIFO order of command queue list Commit 8a3173de inadvertently changed the ordering when switching to hlists. Change to regular list heads so we can use tail list adds, this improves performance. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-10 21:50:33 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: remove C99-style comments Some cleanup before the header file split-out so we don't propagate this style into new files. Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-17 16:53:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] cciss: busy_initializing flag This patch adds a flag called busy_initializing. If there are multiple controllers in a server AND the HP agents are running it's possible the agents may try to poll a card that is still initializing if the driver is removed and then added again. Signed-off-by: Don Brace <dab@hp.com> Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 01:25:21 -07:00
cciss: Use one scan thread per controller and fix hang during rmmod Replace the use of one scan kthread per controller with one per driver. Use a queue to hold a list of controllers that need to be rescanned with routines to add and remove controllers from the queue. Fix locking and completion handling to prevent a hang during rmmod. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-17 13:46:58 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: remove C99-style comments Some cleanup before the header file split-out so we don't propagate this style into new files. Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-17 16:53:31 -07:00
[PATCH] cciss: add support for 1024 logical volumes Add the support for a large number of logical volumes. We will soon have hardware that support up to 1024 logical volumes. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06 20:35:12 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: do not use void pointer for scsi hba data cciss: do not use void pointer for scsi hba data and get rid of related unnecessary type casting and delete some superfluous and misleading comments nearby. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 16:01:42 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] cciss: direct lookup for command completions This patch changes the way we complete commands. In the old method when we got a completion we searched our command list from the top until we find it. This method uses a tag associated with each command (not SCSI command tagging) to index us directly to the completed command. This helps performance. Signed-off-by: Don Brace <dab@hp.com> Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 01:25:22 -07:00
cciss: Use one scan thread per controller and fix hang during rmmod Replace the use of one scan kthread per controller with one per driver. Use a queue to hold a list of controllers that need to be rescanned with routines to add and remove controllers from the queue. Fix locking and completion handling to prevent a hang during rmmod. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-17 13:46:58 -05:00
cciss: add cciss driver sysfs entries Add sysfs entries to the cciss driver needed for the dm/multipath tools. A file for vendor, model, rev, and unique_id is added for each logical drive under directory /sys/bus/pci/devices/<dev>/ccissX/cXdY. Where X = the controller (or host) number and Y is the logical drive number. A link from /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY to /sys/block/cciss!cXdY/device is also created. A bus is created in /sys/bus/cciss. A link is created from the pci ccissX entry to /sys/bus/cciss/devices/ccissX. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02 14:48:39 +02:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: factor out cciss_wait_for_board_ready() cciss: factor out cciss_wait_for_board_ready() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-19 13:45:15 -05:00
cciss: increase time to wait for board reset to start Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:53:31 -05:00
cciss: factor out cciss_wait_for_board_ready() cciss: factor out cciss_wait_for_board_ready() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-19 13:45:15 -05:00
cciss: fix board status waiting code After a reset, we should first wait for the board to become "not ready", and then wait for it to become "ready", instead of immediately waiting for it to become "ready", and do this waiting *after* restoring PCI config space registers. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-22 14:21:07 -05:00
cciss: factor out cciss_reset_devices() cciss: factor out cciss_reset_devices() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-19 13:46:17 -05:00
cciss: increase timeouts for post-reset no-ops Just to reduce the messages about timeouts that appear. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:53:41 -05:00
cciss: factor out cciss_reset_devices() cciss: factor out cciss_reset_devices() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-19 13:46:17 -05:00
cciss: increase timeouts for post-reset no-ops Just to reduce the messages about timeouts that appear. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:53:41 -05:00
cciss: factor out cciss_wait_for_board_ready() cciss: factor out cciss_wait_for_board_ready() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-19 13:45:15 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: do not attempt to read from a write-only register Most smartarrays will tolerate it, but some new ones don't. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Note: this is a regression caused by commit 1ddd5049 Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-09 09:04:12 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add readl after writel in interrupt mask setting code This is to ensure the board interrupts are really off when these functions return. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:52:54 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add readl after writel in interrupt mask setting code This is to ensure the board interrupts are really off when these functions return. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:52:54 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add readl after writel in interrupt mask setting code This is to ensure the board interrupts are really off when these functions return. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:52:54 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add readl after writel in interrupt mask setting code This is to ensure the board interrupts are really off when these functions return. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:52:54 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
cciss: add readl after writel in interrupt mask setting code This is to ensure the board interrupts are really off when these functions return. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:52:54 -05:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
cciss: add readl after writel in interrupt mask setting code This is to ensure the board interrupts are really off when these functions return. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-03 14:52:54 -05:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: make interrupt access methods return type bool Change the return type of our interrupt access routines to bool from unsigned long. It makes more sense that way. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:04 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: make interrupt access methods return type bool Change the return type of our interrupt access routines to bool from unsigned long. It makes more sense that way. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:04 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cciss: add performant mode support for Stars/Sirius Add a mode of controller operation called Performant Mode. Even though cciss has been deprecated in favor of hpsa there are new controllers due out next year that HP must support in older vendor distros. Vendors require all fixes/features be upstream. These new controllers support only 16 commands in simple mode but support up to 1024 in performant mode. This requires us to add this support at this late date. The performant mode transport minimizes host PCI accesses by performinf many completions per read. PCI writes are posted so the host can write then immediately get off the bus not waiting for the writwe to complete to the target. In the context of performant mode the host read out to a controller pulls all posted writes into host memory ensuring the reply queue is coherent. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-02 12:58:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] cciss: increase number of commands on controller Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds. Most Smart Array controllers can support up to 1024 commands but the E200 family can only support 128. To prevent annoying "fifo full" messages we define nr_cmds on a per controller basis by adding it the product table. Signed-off-by: Mike Miller <mike.miller@hp.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06 20:35:01 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00