kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/clocksource/timer-sun5i.c

355 lines
9.1 KiB
Raw Permalink Normal View History

clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource: sun5i: Add support for reset controller The Allwinner A31 that uses this timer has the timer IP asserted in reset. Add an optional reset property to the DT, and deassert the timer from reset if it's there. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-17 11:06:45 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clockevents/drivers/sun5i: Migrate to new 'set-state' interface Migrate sun5i driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-18 16:24:51 +05:30
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clockevents/drivers/sun5i: Migrate to new 'set-state' interface Migrate sun5i driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-18 16:24:51 +05:30
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clockevents/drivers/sun5i: Migrate to new 'set-state' interface Migrate sun5i driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-18 16:24:51 +05:30
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource/drivers/sun5i: Add clock notifiers The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:26 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource: sun5i: Add support for reset controller The Allwinner A31 that uses this timer has the timer IP asserted in reset. Add an optional reset property to the DT, and deassert the timer from reset if it's there. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-17 11:06:45 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource/drivers/sun5i: Use of_io_request_and_map() of_iomap doesn't do a request_mem_region() on the memory area defined in the DT it maps. Switch to of_io_request_and_map() to make sure we're the only users. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-3-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:24 +02:00
clocksource: sun5i: Fix of_io_request_and_map error check of_io_request_and map returns an error pointer, but the current code assumes that on error the returned pointer will be NULL. Obviously, that makes the check completely useless. Change the test to actually check for the proper error code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1430579006-32702-6-git-send-email-maxime.ripard@free-electrons.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-02 17:03:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00
clocksource: sun5i: Add support for reset controller The Allwinner A31 that uses this timer has the timer IP asserted in reset. Add an optional reset property to the DT, and deassert the timer from reset if it's there. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-17 11:06:45 +02:00
clocksource/drivers/sun5i: Refactor the current code Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 12:12:25 +02:00
clocksource: Add Allwinner SoCs HS timers driver Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-07 12:01:48 +01:00