kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/include/net/mac802154.h

389 lines
12 KiB
Raw Permalink Normal View History

mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: use put and get unaligned functions This patch removes the swap pointer and memmove functionality. Instead we use the well known put/get unaligned access with specific byte order handling. Signed-off-by: Alexander Aring <aar@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-04 10:10:20 +01:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: add ieee802154_le64_to_be64 This patch adds a new function to convert a le64 to a be64. This is useful to translate an extended address to a netdev dev_addr. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05 20:51:23 +01:00
ieee802154: add header structs with endiannes and operations This patch provides a set of structures to represent 802.15.4 MAC headers, and a set of operations to push/pull/peek these structs from skbs. We cannot simply pointer-cast the skb MAC header pointer to these structs, because 802.15.4 headers are wildly variable - depending on the first three bytes, virtually all other fields of the header may be present or not, and be present with different lengths. The new header creation/parsing routines also support 802.15.4 security headers, which are currently not supported by the mac802154 implementation of the protocol. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 21:24:00 +01:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
ieee802154: rework cca setting The current cca setting handle is a driver specific call. We need to introduce some 802.15.4 specific layer and mapping 802.15.4 cca modes to driver specific ones inside the 802.15.4 driver. This patch will add such 802.15.4 layer and mapping the cca settings to driver specific ones. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-10 15:33:12 +01:00
mac802154: cleanup address filtering flags This patch changes the address filtering flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:47 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: cleanup address filtering flags This patch changes the address filtering flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:47 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: cleanup address filtering flags This patch changes the address filtering flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:47 +02:00
mac802154: fix flags BIT definitions order This patch fixes commits ("mac802154: cleanup ieee802154 hardware flags") bcbfd2078d9b11277d9c9ce0c30ba73c750503c9 and ("mac802154: cleanup address filtering flags") 6b70a43c7e0202cf285c864bc9f20f607c42e432 by starting the flags definitions at BIT(0) which is same like the previous behaviour. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12 09:24:00 +02:00
mac802154: cleanup address filtering flags This patch changes the address filtering flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:47 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: add missing structure comments This patch add missing comments to internal mac802154 structures. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:52 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: add missing structure comments This patch add missing comments to internal mac802154 structures. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:52 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
ieee802154: enforce consistent endianness in the 802.15.4 stack Enable sparse warnings about endianness, replace the remaining fields regarding network operations without explicit endianness annotations with such that are annotated, and propagate this through the entire stack. Uses of ieee802154_addr_sa are not changed yet, this patch is only concerned with all other fields (such as address filters, operation parameters and the likes). Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 21:23:59 +01:00
mac802154: change pan_coord type to bool To indicate if it's a coordinator or not a bool is enough. There should no more values available which represent some other state. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:53 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: add missing structure comments This patch add missing comments to internal mac802154 structures. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:52 +02:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: rearrange attribute in ieee802154_hw This patch removes the priv attribute in ieee802154_hw to the right section which is commented by attributes which needs to be filled by driver layer. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:51 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: cleanup ieee802154 hardware flags This patch changes the ieee802154 hardware flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:49 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: cleanup ieee802154 hardware flags This patch changes the ieee802154 hardware flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:49 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: cleanup ieee802154 hardware flags This patch changes the ieee802154 hardware flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:49 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: cleanup ieee802154 hardware flags This patch changes the ieee802154 hardware flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:49 +02:00
mac802154: fix flags BIT definitions order This patch fixes commits ("mac802154: cleanup ieee802154 hardware flags") bcbfd2078d9b11277d9c9ce0c30ba73c750503c9 and ("mac802154: cleanup address filtering flags") 6b70a43c7e0202cf285c864bc9f20f607c42e432 by starting the flags definitions at BIT(0) which is same like the previous behaviour. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12 09:24:00 +02:00
mac802154: cleanup ieee802154 hardware flags This patch changes the ieee802154 hardware flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:49 +02:00
mac802154: separate omit tx/rx flags This patch splits the IEEE802154_HW_OMIT_CKSUM hardware flag into IEEE802154_HW_TX_OMIT_CKSUM and IEEE802154_HW_RX_OMIT_CKSUM. This is useful to deliver the received crc from the driver layer to the monitor interface. At the moment we can't do that without change the xmit handling. The received checksum should be visible in monitor mode only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:34 +01:00
mac802154: at86rf230: add hw flags and merge ops This patch adds new mac802154 hw flags for transmit power, csma and listen before transmit (lbt). These flags indicates that the transceiver supports these features. If the flags are set and the driver doesn't implement the necessary functions, then ieee802154_register_device returns -ENOSYS "Function not implemented". This patch merges also all at86rf230 operations into one operations structure and set the right hw flags for the at86rf230 transceivers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-03 00:20:43 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: tx: add support for xmit_async callback This patch renames the existsing xmit callback to xmit_sync and introduces an asynchronous xmit_async function. If ieee802154_ops doesn't provide the xmit_async callback, then we have a fallback to the xmit_sync callback. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26 09:37:08 +01:00
mac802154: tx: add comment at sync xmit callback This patch adds a warning that xmit_sync callback is deprecated and should be removed soon. The 802.15.4 subsystem will not accept synced drivers anymore. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26 09:37:14 +01:00
mac802154: tx: add support for xmit_async callback This patch renames the existsing xmit callback to xmit_sync and introduces an asynchronous xmit_async function. If ieee802154_ops doesn't provide the xmit_async callback, then we have a fallback to the xmit_sync callback. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26 09:37:08 +01:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
mac802154: tx: remove xmit channel context switch This patch removes the channel hopping feature before xmit. There are several issues to provide a real channel hopping (timing requirements, etc...). We don't have any known kernelspace protocol which really use this feature. And I don't know an real user of this feature. We simply drop this feature now. This patch removes also the hold of pib lock which isn't needed by any real driver xmit callback implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26 09:37:04 +01:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
ieee802154: add TX power control to wpan_phy Replace the current u8 transmit_power in wpan_phy with s8 transmit_power. The u8 field contained the actual tx power and a tolerance field, which no physical radio every used. Adjust sysfs entries to keep compatibility with userspace, give tolerances of +-1dB statically there. This patch only adds support for this in the at86rf230 driver and the RF212 chip. Configuration calculation for RF212 is also somewhat basic, but does the job - the RF212 datasheet gives a large table with suggested values for combinations of TX power and page/channel, if this does not work well, we might have to copy the whole table. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:08 +01:00
ieee802154: change transmit power to mbm This patch change the handling of transmit power level from dbm to mbm. This prepares to handle floating point transmit power levels values. The old netlink 802.15.4 will convert the dbm value to mbm for handling backward compatibility. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-17 21:44:40 +02:00
ieee802154: add TX power control to wpan_phy Replace the current u8 transmit_power in wpan_phy with s8 transmit_power. The u8 field contained the actual tx power and a tolerance field, which no physical radio every used. Adjust sysfs entries to keep compatibility with userspace, give tolerances of +-1dB statically there. This patch only adds support for this in the at86rf230 driver and the RF212 chip. Configuration calculation for RF212 is also somewhat basic, but does the job - the RF212 datasheet gives a large table with suggested values for combinations of TX power and page/channel, if this does not work well, we might have to copy the whole table. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:08 +01:00
ieee802154: add support for listen-before-talk in wpan_phy Listen-before-talk is an alternative to CSMA in uncoordinated networks and prescribed by european regulations if one wants to have a device with radio duty cycles above 10% (or less in some bands). Add a phy property to enable/disable LBT in the phy, including support in the at86rf230 driver for RF212 chips. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:10 +01:00
ieee802154: add support for CCA mode in wpan phys The standard describes four modes of clear channel assesment: "energy above threshold", "carrier found", and the logical and/or of these two. Support for CCA mode setting is included in the at86rf230 driver, predicated for RF212 chips. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:11 +01:00
ieee802154: add support for setting CCA energy detection levels Since three of the four clear channel assesment modes make use of energy detection, provide an API to set the energy detection threshold. Driver support for this is available in at86rf230 for the RF212 chips. Since for these chips the minimal energy detection threshold depends on page and channel used, add a field to struct at86rf230_local that stores the minimal threshold. Actual ED thresholds are configured as offsets from this value. For RF212, setting the ED threshold will not work before a channel/page has been set due to the dependency of energy detection in the chip and the actual channel/page selected. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:12 +01:00
ieee802154: change cca ed level to mbm This patch change the handling of cca energy detection level from dbm to mbm. This prepares to handle floating point cca energy detection levels values. The old netlink 802.15.4 will convert the dbm value to mbm for handling backward compatibility. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-17 21:44:41 +02:00
ieee802154: add support for setting CCA energy detection levels Since three of the four clear channel assesment modes make use of energy detection, provide an API to set the energy detection threshold. Driver support for this is available in at86rf230 for the RF212 chips. Since for these chips the minimal energy detection threshold depends on page and channel used, add a field to struct at86rf230_local that stores the minimal threshold. Actual ED thresholds are configured as offsets from this value. For RF212, setting the ED threshold will not work before a channel/page has been set due to the dependency of energy detection in the chip and the actual channel/page selected. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:12 +01:00
ieee802154: add netlink APIs for smartMAC configuration Introduce new netlink attributes for SET_PHY_ATTRS: * CSMA minimal backoff exponent * CSMA maximal backoff exponent * CSMA retry limit * frame retransmission limit The CSMA attributes shall correspond to minBE, maxBE and maxCSMABackoffs of 802.15.4, respectively. The frame retransmission shall correspond to maxFrameRetries of 802.15.4, unless given as -1: then the old behaviour of the stack shall apply. For RF2xy, the old behaviour is to not do channel sensing at all and simply send *right now*, which is not intended behaviour for most applications and actually prohibited for some channel/page combinations. For all values except frame retransmission limit, the defaults of 802.15.4 apply. Frame retransmission limits are set to -1 to indicate backward-compatible behaviour. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:14 +01:00
mac802154: add support for promiscuous mode This patch adds a new driver operation to bring the transceiver into promiscuous mode. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:32 +01:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: tx: add support for xmit_async callback This patch renames the existsing xmit callback to xmit_sync and introduces an asynchronous xmit_async function. If ieee802154_ops doesn't provide the xmit_async callback, then we have a fallback to the xmit_sync callback. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26 09:37:08 +01:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: ops: declare channel and page as u8 The range of channel and page fits into an unsigned byte range. This patch changes the set_channel parameter definitions for channel and page to u8. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28 18:21:19 +01:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
ieee802154: change transmit power to mbm This patch change the handling of transmit power level from dbm to mbm. This prepares to handle floating point transmit power levels values. The old netlink 802.15.4 will convert the dbm value to mbm for handling backward compatibility. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-17 21:44:40 +02:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
ieee802154: rework cca setting The current cca setting handle is a driver specific call. We need to introduce some 802.15.4 specific layer and mapping 802.15.4 cca modes to driver specific ones inside the 802.15.4 driver. This patch will add such 802.15.4 layer and mapping the cca settings to driver specific ones. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-10 15:33:12 +01:00
ieee802154: change cca ed level to mbm This patch change the handling of cca energy detection level from dbm to mbm. This prepares to handle floating point cca energy detection levels values. The old netlink 802.15.4 will convert the dbm value to mbm for handling backward compatibility. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-17 21:44:41 +02:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
ieee802154: add netlink APIs for smartMAC configuration Introduce new netlink attributes for SET_PHY_ATTRS: * CSMA minimal backoff exponent * CSMA maximal backoff exponent * CSMA retry limit * frame retransmission limit The CSMA attributes shall correspond to minBE, maxBE and maxCSMABackoffs of 802.15.4, respectively. The frame retransmission shall correspond to maxFrameRetries of 802.15.4, unless given as -1: then the old behaviour of the stack shall apply. For RF2xy, the old behaviour is to not do channel sensing at all and simply send *right now*, which is not intended behaviour for most applications and actually prohibited for some channel/page combinations. For all values except frame retransmission limit, the defaults of 802.15.4 apply. Frame retransmission limits are set to -1 to indicate backward-compatible behaviour. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:14 +01:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
ieee802154: add netlink APIs for smartMAC configuration Introduce new netlink attributes for SET_PHY_ATTRS: * CSMA minimal backoff exponent * CSMA maximal backoff exponent * CSMA retry limit * frame retransmission limit The CSMA attributes shall correspond to minBE, maxBE and maxCSMABackoffs of 802.15.4, respectively. The frame retransmission shall correspond to maxFrameRetries of 802.15.4, unless given as -1: then the old behaviour of the stack shall apply. For RF2xy, the old behaviour is to not do channel sensing at all and simply send *right now*, which is not intended behaviour for most applications and actually prohibited for some channel/page combinations. For all values except frame retransmission limit, the defaults of 802.15.4 apply. Frame retransmission limits are set to -1 to indicate backward-compatible behaviour. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 11:34:14 +01:00
mac802154: add support for promiscuous mode This patch adds a new driver operation to bring the transceiver into promiscuous mode. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:32 +01:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00
ieee802154: 6lowpan: check on valid 802.15.4 frame This patch adds frame control checks to check if the received frame is something which could contain a 6LoWPAN packet. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-02 14:21:29 +02:00
mac802154: fix mac header length check I got report about that sometimes the WARN_ON occurs there which should never happen. I came to the conclusion that the mac header is there but inside the headroom of skb. The skb->len information doesn't contain the information about the headroom length and skb->len is lesser than two. We check now if the skb_mac_header pointer is set and the room between mac header pointer and tail pointer. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-19 09:59:11 +01:00
ieee802154: 6lowpan: check on valid 802.15.4 frame This patch adds frame control checks to check if the received frame is something which could contain a 6LoWPAN packet. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-02 14:21:29 +02:00
mac802154: use put and get unaligned functions This patch removes the swap pointer and memmove functionality. Instead we use the well known put/get unaligned access with specific byte order handling. Signed-off-by: Alexander Aring <aar@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-04 10:10:20 +01:00
ieee802154: 6lowpan: check on valid 802.15.4 frame This patch adds frame control checks to check if the received frame is something which could contain a 6LoWPAN packet. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-02 14:21:29 +02:00
mac802154: add helper for converting dev_addr This patch adds a helper for converting the dev_addr attribute in netdevice to __le64 type. The dev_addr attribute is a char pointer and contains the extended address in big endian byte order. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-02 04:18:40 +01:00
mac802154: cleanup ieee802154_netdev_to_extended_addr This patch cleanups the ieee802154_be64_to_le64 to have a similar function like ieee802154_le64_to_be64 only with switched source and destionation types. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05 20:51:24 +01:00
mac802154: add helper for converting dev_addr This patch adds a helper for converting the dev_addr attribute in netdevice to __le64 type. The dev_addr attribute is a char pointer and contains the extended address in big endian byte order. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-02 04:18:40 +01:00
mac802154: cleanup ieee802154_netdev_to_extended_addr This patch cleanups the ieee802154_be64_to_le64 to have a similar function like ieee802154_le64_to_be64 only with switched source and destionation types. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05 20:51:24 +01:00
mac802154: add helper for converting dev_addr This patch adds a helper for converting the dev_addr attribute in netdevice to __le64 type. The dev_addr attribute is a char pointer and contains the extended address in big endian byte order. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-02 04:18:40 +01:00
mac802154: use put and get unaligned functions This patch removes the swap pointer and memmove functionality. Instead we use the well known put/get unaligned access with specific byte order handling. Signed-off-by: Alexander Aring <aar@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-04 10:10:20 +01:00
mac802154: add helper for converting dev_addr This patch adds a helper for converting the dev_addr attribute in netdevice to __le64 type. The dev_addr attribute is a char pointer and contains the extended address in big endian byte order. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-02 04:18:40 +01:00
mac802154: add ieee802154_le64_to_be64 This patch adds a new function to convert a le64 to a be64. This is useful to translate an extended address to a netdev dev_addr. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05 20:51:23 +01:00
mac802154: use put and get unaligned functions This patch removes the swap pointer and memmove functionality. Instead we use the well known put/get unaligned access with specific byte order handling. Signed-off-by: Alexander Aring <aar@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-04 10:10:20 +01:00
mac802154: add ieee802154_le64_to_be64 This patch adds a new function to convert a le64 to a be64. This is useful to translate an extended address to a netdev dev_addr. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05 20:51:23 +01:00
6lowpan: cleanup lowpan_header_decompress This patch changes the lowpan_header_decompress function by removing inklayer related information from parameters. This is currently for supporting short and extended address for iphc handling in 802154. We don't support short address handling anyway right now, but there exists already code for handling short addresses in lowpan_header_decompress. The address parameters are also changed to a void pointer, so 6LoWPAN linklayer specific code can put complex structures as these parameters and cast it again inside the generic code by evaluating linklayer type before. The order is also changed by destination address at first and then source address, which is the same like all others functions where destination is always the first, memcpy, dev_hard_header, lowpan_header_compress, etc. This patch also moves the fetching of iphc values from 6LoWPAN linklayer specific code into the generic branch. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-13 13:42:58 +02:00
mac802154: use put and get unaligned functions This patch removes the swap pointer and memmove functionality. Instead we use the well known put/get unaligned access with specific byte order handling. Signed-off-by: Alexander Aring <aar@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-04 10:10:20 +01:00
6lowpan: cleanup lowpan_header_decompress This patch changes the lowpan_header_decompress function by removing inklayer related information from parameters. This is currently for supporting short and extended address for iphc handling in 802154. We don't support short address handling anyway right now, but there exists already code for handling short addresses in lowpan_header_decompress. The address parameters are also changed to a void pointer, so 6LoWPAN linklayer specific code can put complex structures as these parameters and cast it again inside the generic code by evaluating linklayer type before. The order is also changed by destination address at first and then source address, which is the same like all others functions where destination is always the first, memcpy, dev_hard_header, lowpan_header_compress, etc. This patch also moves the fetching of iphc values from 6LoWPAN linklayer specific code into the generic branch. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-13 13:42:58 +02:00
ieee802154: add short address helpers This patch introduce some short address handling functionality into ieee802154 headers. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-11 11:04:15 +02:00
mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30 17:44:52 +02:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: declare struct ieee802154_ops as const The ieee802154_ops structure should be never changed during runtime. This patch declare this structure as const to avoid a runtime change. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28 18:21:18 +01:00
mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30 17:44:52 +02:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30 17:44:52 +02:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30 17:44:52 +02:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: allocation of ieee802154 device An interface to allocate and register ieee802154 compatible device. The allocated device has the following representation in memory: +-----------------------+ | struct wpan_phy | +-----------------------+ | struct mac802154_priv | +-----------------------+ | driver's private data | +-----------------------+ Used by device drivers to register new instance in the stack. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:20 +00:00
mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30 17:44:52 +02:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30 17:44:52 +02:00
mac802154: add netdev qeue helpers This patch adds a new file net/mac802154/util.c which contains utility functions for drivers, etc. This file contains functions to start and stop queues for all virtual interfaces, this is useful for asynchronous handling by driver level. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26 09:37:05 +01:00
mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30 17:44:52 +02:00
mac802154: add netdev qeue helpers This patch adds a new file net/mac802154/util.c which contains utility functions for drivers, etc. This file contains functions to start and stop queues for all virtual interfaces, this is useful for asynchronous handling by driver level. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26 09:37:05 +01:00
mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30 17:44:52 +02:00
mac802154: add interframe spacing time handling This patch adds a new interframe spacing time handling into mac802154 layer. Interframe spacing time is a time period between each transmit. This patch adds a high resolution timer into mac802154 and starts on xmit complete with corresponding interframe spacing expire time if ifs_handling is true. We make it variable because it depends if interframe spacing time is handled by transceiver or mac802154. At the timer complete function we wake the netdev queue again. This avoids new frame transmit in range of interframe spacing time. For synced driver we add no handling of interframe spacing time. This is currently a lack of support in all synced xmit drivers. I suppose it's working because the latency of workqueue which is needed to call spi_sync. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12 19:51:56 +01:00
mac802154: add netdev qeue helpers This patch adds a new file net/mac802154/util.c which contains utility functions for drivers, etc. This file contains functions to start and stop queues for all virtual interfaces, this is useful for asynchronous handling by driver level. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26 09:37:05 +01:00
mac802154: basic ieee802.15.4 device structures The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:19 +00:00