linux

net: Add Open vSwitch kernel components. Open vSwitch is a multilayer Ethernet switch targeted at virtualized environments. In addition to supporting a variety of features expected in a traditional hardware switch, it enables fine-grained programmatic extension and flow-based control of the network. This control is useful in a wide variety of applications but is particularly important in multi-server virtualization deployments, which are often characterized by highly dynamic endpoints and the need to maintain logical abstractions for multiple tenants. The Open vSwitch datapath provides an in-kernel fast path for packet forwarding. It is complemented by a userspace daemon, ovs-vswitchd, which is able to accept configuration from a variety of sources and translate it into packet processing rules. See http://openvswitch.org for more information and userspace utilities. Signed-off-by: Jesse Gross <jesse@nicira.com>

2011-10-25 19:26:31 -07:00

openvswitch: Restructure datapath.c and flow.c Over the time datapath.c and flow.c has became pretty large files. Following patch restructures functionality of component into three different components: flow.c: contains flow extract. flow_netlink.c: netlink flow api. flow_table.c: flow table api. This patch restructures code without changing logic. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>

2013-10-03 18:16:47 -07:00

net: Add Open vSwitch kernel components. Open vSwitch is a multilayer Ethernet switch targeted at virtualized environments. In addition to supporting a variety of features expected in a traditional hardware switch, it enables fine-grained programmatic extension and flow-based control of the network. This control is useful in a wide variety of applications but is particularly important in multi-server virtualization deployments, which are often characterized by highly dynamic endpoints and the need to maintain logical abstractions for multiple tenants. The Open vSwitch datapath provides an in-kernel fast path for packet forwarding. It is complemented by a userspace daemon, ovs-vswitchd, which is able to accept configuration from a variety of sources and translate it into packet processing rules. See http://openvswitch.org for more information and userspace utilities. Signed-off-by: Jesse Gross <jesse@nicira.com>

2011-10-25 19:26:31 -07:00

openvswitch: Add gre tunnel support. Add gre vport implementation. Most of gre protocol processing is pushed to gre module. It make use of gre demultiplexer therefore it can co-exist with linux device based gre tunnels. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-17 17:50:33 -07:00

openvswitch: Add vxlan tunneling support. Following patch adds vxlan vport type for openvswitch using vxlan api. So now there is vxlan dependency for openvswitch. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-08-19 11:23:34 -07:00

openvswitch: Remove conntrack Kconfig option. There's no particular desire to have conntrack action support in Open vSwitch as an independently configurable bit, rather just to ensure there is not a hard dependency. This exposed option doesn't accurately reflect the conntrack dependency when enabled, so simplify this by removing the option. Compile the support if NF_CONNTRACK is enabled. Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-09-04 13:07:40 -07:00

openvswitch: Add conntrack action Expose the kernel connection tracker via OVS. Userspace components can make use of the CT action to populate the connection state (ct_state) field for a flow. This state can be subsequently matched. Exposed connection states are OVS_CS_F_*: - NEW (0x01) - Beginning of a new connection. - ESTABLISHED (0x02) - Part of an existing connection. - RELATED (0x04) - Related to an established connection. - INVALID (0x20) - Could not track the connection for this packet. - REPLY_DIR (0x40) - This packet is in the reply direction for the flow. - TRACKED (0x80) - This packet has been sent through conntrack. When the CT action is executed by itself, it will send the packet through the connection tracker and populate the ct_state field with one or more of the connection state flags above. The CT action will always set the TRACKED bit. When the COMMIT flag is passed to the conntrack action, this specifies that information about the connection should be stored. This allows subsequent packets for the same (or related) connections to be correlated with this connection. Sending subsequent packets for the connection through conntrack allows the connection tracker to consider the packets as ESTABLISHED, RELATED, and/or REPLY_DIR. The CT action may optionally take a zone to track the flow within. This allows connections with the same 5-tuple to be kept logically separate from connections in other zones. If the zone is specified, then the "ct_zone" match field will be subsequently populated with the zone id. IP fragments are handled by transparently assembling them as part of the CT action. The maximum received unit (MRU) size is tracked so that refragmentation can occur during output. IP frag handling contributed by Andy Zhou. Based on original design by Justin Pettit. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-08-26 11:31:48 -07:00

openvswitch: Re-add CONFIG_OPENVSWITCH_VXLAN This readds the config option CONFIG_OPENVSWITCH_VXLAN to avoid a hard dependency of OVS on VXLAN. It moves the VXLAN config compat code to vport-vxlan.c and allows compliation as a module. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device") Fixes: 2661371ace96 ("openvswitch: fix compilation when vxlan is a module") Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-07-29 13:52:06 +02:00

ovs: Turn vports with dependencies into separate modules The internal and netdev vport remain part of openvswitch.ko. Encap vports including vxlan, gre, and geneve can be built as separate modules and are loaded on demand. Modules can be unloaded after use. Datapath ports keep a reference to the vport module during their lifetime. Allows to remove the error prone maintenance of the global list vport_ops_list. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-10-22 17:29:06 +02:00

24 lines 446 B Raw Permalink Normal View History

24 lines

446 B

Raw Permalink Normal View History