kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/net/sunrpc/debugfs.c

376 lines
8 KiB
Raw Permalink Normal View History

sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
SUNRPC: Transport fault injection It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-11 14:02:25 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
SUNRPC: Transport fault injection It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-11 14:02:25 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
SUNRPC: Transport fault injection It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-11 14:02:25 -04:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
SUNRPC: Transport fault injection It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-11 14:02:25 -04:00
SUNRPC: Address kbuild warning in net/sunrpc/debugfs.c Cross-compile test on ARCH=mn10300: In file included from include/linux/list.h:8:0, from include/linux/wait.h:6, from include/linux/fs.h:6, from include/linux/debugfs.h:18, from net/sunrpc/debugfs.c:7: net/sunrpc/debugfs.c: In function 'fault_disconnect_write': include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast (void) (&_min1 == &_min2); \ ^ >> net/sunrpc/debugfs.c:307:8: note: in expansion of macro 'min' len = min(len, sizeof(buffer) - 1); Fixes: ('SUNRPC: Transport fault injection') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-11 13:47:10 -04:00
SUNRPC: Transport fault injection It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-11 14:02:25 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
SUNRPC: Transport fault injection It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-11 14:02:25 -04:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
SUNRPC: Transport fault injection It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-11 14:02:25 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
sunrpc: add a debugfs rpc_xprt directory with an info file in it Add a new directory heirarchy under the debugfs sunrpc/ directory: sunrpc/ rpc_xprt/ <xprt id>/ Within that directory, we can put files that give info about the xprts. We do have the (minor) problem that there is no succinct, unique identifier for rpc_xprts. So we generate them synthetically with a static atomic_t counter. For now, this directory just holds an "info" file, but we may add other files to it in the future. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:44 -05:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00
SUNRPC: Transport fault injection It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-11 14:02:25 -04:00
sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31 12:03:28 -04:00
sunrpc: add debugfs file for displaying client rpc_task queue It's possible to get a dump of the RPC task queue by writing a value to /proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get a dump of the RPC client task list into the log buffer. This is a rather inconvenient interface however, and makes it hard to get immediate info about the task queue. Add a new directory hierarchy under debugfs: sunrpc/ rpc_clnt/ <clientid>/ Within each clientid directory we create a new "tasks" file that will dump info similar to what shows up in the log buffer, but with a few small differences -- we avoid printing raw kernel addresses in favor of symbolic names and the XID is also displayed. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-26 14:44:43 -05:00