kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-14 05:55:17 +00:00
Code Issues Releases Packages Activity
linux/net/ethtool/pause.c

193 lines
5 KiB
Raw Permalink Normal View History

ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: add standard pause stats Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 17:11:52 -07:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: trim policy tables Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:35 -07:00
ethtool: link up ethnl_header_policy as a nested policy To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:36 -07:00
ethtool: specify which header flags are supported per command Perform header flags validation through the policy. Only pause command supports ETHTOOL_FLAG_STATS. Create a separate policy to be able to express that in policy dumps to user space. Note that even though the core will validate the header policy, it cannot record multiple layers of attributes and we have to re-parse header sub-attrs. When doing so we could skip attribute validation, or use most permissive policy. Opt for the former. We will no longer return the extack cookie for flags but since we only added first new flag in this release it's not expected that any user space had a chance to make use of it. v2: - remove the re-validation in ethnl_parse_header_dev_get() Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:39 -07:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: add standard pause stats Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 17:11:52 -07:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: add standard pause stats Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 17:11:52 -07:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: add standard pause stats Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 17:11:52 -07:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: add standard pause stats Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 17:11:52 -07:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: add standard pause stats Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 17:11:52 -07:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: add standard pause stats Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 17:11:52 -07:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: set pause parameters with PAUSE_SET request Implement PAUSE_SET netlink request to set pause parameters of a network device. Thease are traditionally set with ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:28 +01:00
ethtool: trim policy tables Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:35 -07:00
ethtool: link up ethnl_header_policy as a nested policy To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:36 -07:00
ethtool: set pause parameters with PAUSE_SET request Implement PAUSE_SET netlink request to set pause parameters of a network device. Thease are traditionally set with ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:28 +01:00
ethtool: wire up set policies to ops Similarly to get commands wire up the policies of set commands to get parsing by the core and policy dumps. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:34 -07:00
ethtool: set pause parameters with PAUSE_SET request Implement PAUSE_SET netlink request to set pause parameters of a network device. Thease are traditionally set with ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:28 +01:00
ethtool: add PAUSE_NTF notification Send ETHTOOL_MSG_PAUSE_NTF notification whenever pause parameters of a network device are modified using ETHTOOL_MSG_PAUSE_SET netlink message or ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:33 +01:00
ethtool: set pause parameters with PAUSE_SET request Implement PAUSE_SET netlink request to set pause parameters of a network device. Thease are traditionally set with ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:28 +01:00