kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-14 05:55:17 +00:00
Code Issues Releases Packages Activity
linux/drivers/reset/Kconfig

216 lines
6.5 KiB
Raw Permalink Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:07:45 +01:00
reset: Add reset controller API This adds a simple API for devices to request being reset by separate reset controller hardware and implements the reset signal device tree binding. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Pavel Machek <pavel@ucw.cz>
2012-11-19 17:23:13 +01:00
drivers: reset: STi SoC system configuration reset controller support This patch adds a reset controller implementation for STMicroelectronics STi family SoCs; it allows a group of related reset like controls found in multiple system configuration registers to be represented by a single controller device. System configuration registers are accessed through the regmap framework and the mfd/syscon driver. The implementation optionally supports waiting for the reset action to be acknowledged in a separate status register and supports both active high and active low reset lines. These properties are common across all the reset channels in a specific reset controller instance, hence all channels in a paritcular controller are expected to behave in the same way. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2013-08-07 15:53:12 +01:00
reset: fix Kconfig menu to include reset drivers in sub-menu In "make menuconfig", reset drivers are currently lined up together with the reset sub-system menu, like this: -*- Reset Controller Support ---- < > Hi6220 Reset Driver (It also means, the menu "Reset Controller Support" is always empty.) "Hi6220 Reset Driver" should go into the sub-menu of the "Reset Controller Support". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-03 15:29:52 +09:00
reset: Add Altera Arria10 SR Reset Controller This patch adds the reset controller functionality for Peripheral PHYs to the Arria10 System Resource Chip. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-02-22 11:10:17 -06:00
reset: ath79: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Aban Bedel <albeu@free.fr> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-28 15:30:08 +02:00
ARC: reset: introduce AXS10x reset driver ARC AXS10x boards support custom IP-block which allows to control reset signals of selected peripherals. For example DW GMAC, etc... This block is controlled via memory-mapped register (AKA CREG) which represents up-to 32 reset lines. This regiter is self-clearing so we don't need to deassert line after reset. As of today only the following lines are used: - DW GMAC - line 5 Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-14 17:28:42 +03:00
reset: berlin: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-28 15:31:12 +02:00
reset: Add Broadcom STB SW_INIT reset controller driver Add support for resetting blocks through the Linux reset controller subsystem when reset lines are provided through a SW_INIT-style reset controller on Broadcom STB SoCs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-23 14:54:36 -08:00
ARC: reset: remove the misleading v1 suffix all over There is no plan yet to do a v2 board. And even if we were to do it only some IPs would actually change, so it be best to add suffixes at that point, not now ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-08-31 11:06:07 -07:00
ARC: reset: Only build on archs that have IOMEM This avoids the error: drivers/reset/reset-hsdk-v1.o: In function `hsdkv1_reset_probe': /home/thomas/git/linux/drivers/reset/reset-hsdk-v1.c:101: undefined reference to `devm_ioremap_resource' collect2: error: ld returned 1 exit status Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-09 06:02:46 +02:00
reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST The HSDK reset driver is only useful when building for an ARC HSDK platform. While at it, drop the "default n", as that is the default. Fixes: e0be864f14240cb1 ("ARC: reset: introduce HSDKv1 reset driver") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [p.zabel@pengutronix.de: rebased, renamed RESET_HSDK_V1 to RESET_HSDK] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-11 14:22:08 +02:00
ARC: reset: introduce HSDKv1 reset driver The HSDK v1 periphery IPs can be reset by accessing some registers from the CGU block. The list of available reset lines is documented in the DT bindings. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-07-19 21:45:11 +03:00
ARC: reset: remove the misleading v1 suffix all over There is no plan yet to do a v2 board. And even if we were to do it only some IPs would actually change, so it be best to add suffixes at that point, not now ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-08-31 11:06:07 -07:00
ARC: reset: introduce HSDKv1 reset driver The HSDK v1 periphery IPs can be reset by accessing some registers from the CGU block. The list of available reset lines is documented in the DT bindings. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-07-19 21:45:11 +03:00
reset: Add i.MX7 SRC reset driver Add reset controller driver exposing various reset faculties, implemented by System Reset Controller IP block. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-02-21 08:13:31 -08:00
reset: imx7: Add support for i.MX8MQ IP block variant Add bits and pieces needed to support IP block variant found on i.MX8MQ SoCs. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [p.zabel@pengutronix.de: fixed whitespace alignment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-21 18:10:43 -08:00
reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency This config select's MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-06 20:15:11 +09:00
reset: imx7: Add support for i.MX8MQ IP block variant Add bits and pieces needed to support IP block variant found on i.MX8MQ SoCs. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [p.zabel@pengutronix.de: fixed whitespace alignment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-21 18:10:43 -08:00
reset: Add i.MX7 SRC reset driver Add reset controller driver exposing various reset faculties, implemented by System Reset Controller IP block. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-02-21 08:13:31 -08:00
reset: Add a reset controller driver for the Lantiq XWAY based SoCs The reset controllers (on xRX200 and newer SoCs have two of them) are provided by the RCU module. This was initially implemented as a simple reset controller. However, the RCU module provides more functionality (ethernet GPHYs, USB PHY, etc.), which makes it a MFD device. The old reset controller driver implementation from arch/mips/lantiq/xway/reset.c did not honor this fact. For some devices the request and the status bits are different. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Cc: john@phrozen.org Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17125/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-20 00:18:17 +02:00
reset: lpc18xx: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Joachim Eastwood <manabian@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-28 15:32:01 +02:00
reset: meson: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-28 15:32:36 +02:00
reset: meson: add meson audio arb driver The Amlogic Audio ARB is a simple device which enables or disables the access of Audio FIFOs to DDR on AXG based SoC. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-20 17:26:33 +02:00
reset: Add Oxford Semiconductor Reset Controller driver Add System reset controller driver for Oxford Semiconductor OXNAS SoC Family. CC: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-04-01 16:16:13 +02:00
reset: pistachio: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Damien Horsley <Damien.Horsley@imgtec.com> Acked-by: James Hartley <james.hartley@imgtec.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-28 15:33:07 +02:00
reset: qcom: AOSS (always on subsystem) reset controller Add reset controller driver for Qualcomm SDM845 SoC to control reset signals provided by AOSS for Modem, Venus ADSP, GPU, Camera, Wireless, Display subsystem Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-06-27 19:54:43 +05:30
reset: qcom: PDC Global (Power Domain Controller) reset controller Add reset controller for SDM845 SoCs to control reset signals provided by PDC Global for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-08-30 00:42:11 +05:30
reset: Add support for resets provided by SCMI On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control. System Control and Management Interface(SCMI) Message Protocol is defined for the communication between the Application Cores(AP) and the SCP. Adds support for the resets provided using SCMI protocol for performing reset management of various devices present on the SoC. Various reset functionalities are achieved by the means of different ARM SCMI device operations provided by the ARM SCMI framework. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-07-08 09:41:08 +01:00
reset: add reset-simple to unify socfpga, stm32, sunxi, and zx2967 Copy reusable parts from the sunxi driver, to add a driver for simple reset controllers with reset lines that can be controlled by toggling bits in exclusive, contiguous register ranges using read-modify-write cycles under a spinlock. The following patches will replace compatible reset drivers with reset-simple, extending it where necessary. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2017-08-11 12:58:43 +02:00
reset: simple: Add Realtek RTD1195/RTD1295 Enable RESET_SIMPLE for ARCH_REALTEK. They can reuse the DesignWare bindings to avoid a new compatible. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-23 12:13:10 +02:00
reset: add reset-simple to unify socfpga, stm32, sunxi, and zx2967 Copy reusable parts from the sunxi driver, to add a driver for simple reset controllers with reset lines that can be controlled by toggling bits in exclusive, contiguous register ranges using read-modify-write cycles under a spinlock. The following patches will replace compatible reset drivers with reset-simple, extending it where necessary. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2017-08-11 12:58:43 +02:00
reset: simple: Enable for ASPEED systems ASPEED BMC SoCs have a reset controller in the LPC IP that can be controlled using this driver to release the UARTs from reset. No special configuration is required, so only the compatible string is added. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-02-20 12:13:29 +10:30
reset: simple: Keep alphabetical order Restore alphabetical order for Kconfig dependencies and help text. Compatibles got out of order too, but no functional change done here. Goal is to make it obvious where to add new platforms. Fixes: 64c47b624f64 ("reset: Add reset controller support for BM1880 SoC") Fixes: 1d7592f84f92 ("reset: simple: Enable for ASPEED systems") Fixes: 96a2f50305d1 ("reset: build simple reset controller driver for Agilex") Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-23 12:13:09 +02:00
reset: simple: Add Realtek RTD1195/RTD1295 Enable RESET_SIMPLE for ARCH_REALTEK. They can reuse the DesignWare bindings to avoid a new compatible. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-23 12:13:10 +02:00
reset: simple: Enable for ASPEED systems ASPEED BMC SoCs have a reset controller in the LPC IP that can be controlled using this driver to release the UARTs from reset. No special configuration is required, so only the compatible string is added. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-02-20 12:13:29 +10:30
reset: stm32: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Gabriel Fernandez <gabriel.fernandez@st.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-28 15:34:15 +02:00
reset: stm32mp1: Enable stm32mp1 reset driver stm32mp1 RCC IP 1 has a reset SET register and a reset CLEAR register. Writing '0' on reset SET register has no effect Writing '1' on reset SET register activates the reset of the corresponding peripheral Writing '0' on reset CLEAR register has no effect Writing '1' on reset CLEAR register releases the reset of the corresponding peripheral See Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-19 08:25:51 +01:00
reset: socfpga: add an early reset driver for SoCFPGA Create a separate reset driver that uses the reset operations in reset-simple. The reset driver for the SoCFPGA platform needs to register early in order to be able bring online timers that needed early in the kernel bootup. We do not need this early reset driver for Stratix10, because on arm64, Linux does not need the timers are that in reset. Linux is able to run just fine with the internal armv8 timer. Thus, we use a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform. The Stratix10 platform will continue to use the reset-simple platform driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use the early reset driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-11-13 12:50:48 -06:00
reset: sunxi: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-09 09:28:44 +02:00
reset: sunxi: use reset-simple driver Use the newly created copies in the reset-simple driver to replace the sunxi platform driver code and reset operations. The separate sunxi driver still remains to register the early reset controllers, but it reuses the reset operations in reset-simple. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2017-08-11 12:58:43 +02:00
reset: sunxi: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-09 09:28:44 +02:00
reset: Add the TI SCI reset driver Some TI Keystone family of SoCs contain a system controller (like the Power Management Micro Controller (PMMC) on 66AK2G SoCs) that manage the low-level device control (like clocks, resets etc) for the various hardware modules present on the SoC. These device control operations are provided to the host processor OS through a communication protocol called the TI System Control Interface (TI SCI) protocol. This patch adds a reset driver that communicates to the system controller over the TI SCI protocol for performing reset management of various devices present on the SoC. Various reset functionalities are achieved by the means of different TI SCI device operations provided by the TI SCI framework. Signed-off-by: Andrew F. Davis <afd@ti.com> [s-anna@ti.com: documentation changes, revised commit message] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> [p.zabel@pengutronix.de: const struct reset_control_ops] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-05-24 13:09:30 -05:00
reset: ti_syscon: Rename TI_SYSCON_RESET to RESET_TI_SYSCON Rename the current Kconfig name used for the TI SYSCON Reset driver from TI_SYSCON_RESET to RESET_TI_SYSCON to match the convention used for all the reset drivers present at the base reset folder. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-05-23 22:00:12 -05:00
reset: add TI SYSCON based reset driver Add a reset-controller driver for performing reset management of various devices present on the SoC, with the reset registers shared between devices in a common register memory space. This driver uses the syscon/regmap frameworks to actually implement the various reset functionalities needed by the reset consumer devices. Signed-off-by: Andrew F. Davis <afd@ti.com> [s-anna@ti.com: add documentation, syscon name change] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-06-27 12:12:17 -05:00
reset: uniphier: add reset controller driver for UniPhier SoCs This is the initial commit for UniPhier reset controller driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-02 13:18:29 +09:00
reset: uniphier-usb3: Rename to reset-uniphier-glue This driver works for controlling the reset lines including USB3 glue layer, however, this can be applied to other glue layers. Now this patch renames the driver from "reset-uniphier-usb3" to "reset-uniphier-glue". At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to CONFIG_RESET_UNIPHIER_GLUE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-11-09 10:42:05 +09:00
reset: uniphier: add USB3 core reset control Add a reset line to enable USB3 core implemented in UniPhier SoCs. This reuses only the reset operations in reset-simple, because the reset-simple doesn't handle any SoC-dependent clocks and resets. This reset line is included in the USB3 glue layer, and it's necessary to enable clocks and deassert resets of the layer before using this reset line. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-10 10:14:17 +09:00
reset: uniphier-usb3: Rename to reset-uniphier-glue This driver works for controlling the reset lines including USB3 glue layer, however, this can be applied to other glue layers. Now this patch renames the driver from "reset-uniphier-usb3" to "reset-uniphier-glue". At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to CONFIG_RESET_UNIPHIER_GLUE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-11-09 10:42:05 +09:00
reset: uniphier: add USB3 core reset control Add a reset line to enable USB3 core implemented in UniPhier SoCs. This reuses only the reset operations in reset-simple, because the reset-simple doesn't handle any SoC-dependent clocks and resets. This reset line is included in the USB3 glue layer, and it's necessary to enable clocks and deassert resets of the layer before using this reset line. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-10 10:14:17 +09:00
reset: zynq: add driver Kconfig option Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Moritz Fischer <moritz.fischer@ettus.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-09 09:28:54 +02:00
drivers: reset: STi SoC system configuration reset controller support This patch adds a reset controller implementation for STMicroelectronics STi family SoCs; it allows a group of related reset like controls found in multiple system configuration registers to be represented by a single controller device. System configuration registers are accessed through the regmap framework and the mfd/syscon driver. The implementation optionally supports waiting for the reset action to be acknowledged in a separate status register and supports both active high and active low reset lines. These properties are common across all the reset channels in a specific reset controller instance, hence all channels in a paritcular controller are expected to behave in the same way. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2013-08-07 15:53:12 +01:00
reset: hi6220: Reset driver for hisilicon hi6220 SoC Add reset driver for hi6220-hikey board,this driver supply deassert of IP on hi6220 SoC. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-20 10:10:05 +08:00
reset: Add Tegra BPMP reset driver This driver uses the services provided by the BPMP firmware driver to implement a reset driver based on the MRQ_RESET request. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-18 15:50:09 +02:00
reset: fix Kconfig menu to include reset drivers in sub-menu In "make menuconfig", reset drivers are currently lined up together with the reset sub-system menu, like this: -*- Reset Controller Support ---- < > Hi6220 Reset Driver (It also means, the menu "Reset Controller Support" is always empty.) "Hi6220 Reset Driver" should go into the sub-menu of the "Reset Controller Support". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-03 15:29:52 +09:00