kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-14 05:55:17 +00:00
Code Issues Releases Packages Activity
linux/drivers/md/raid10.c

5289 lines
145 KiB
Raw Permalink Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 47 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version you should have received a copy of the gnu general public license for example usr src linux copying if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 20 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170858.552543146@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20 19:08:12 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30 22:57:33 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
md: build failure due to missing delay.h Today's linux-next build (powerpc ppc64_defconfig) failed like this: drivers/md/raid1.c: In function 'sync_request': drivers/md/raid1.c:1759: error: implicit declaration of function 'msleep_interruptible' make[3]: *** [drivers/md/raid1.o] Error 1 make[3]: *** Waiting for unfinished jobs.... drivers/md/raid10.c: In function 'sync_request': drivers/md/raid10.c:1749: error: implicit declaration of function 'msleep_interruptible' make[3]: *** [drivers/md/raid10.o] Error 1 drivers/md/md.c: In function 'md_do_sync': drivers/md/md.c:5915: error: implicit declaration of function 'msleep' Caused by commit 6caa3b0bbdb474647f6bdd8a958ffc46f78d8d58 ("md: Remove unnecessary #includes, #defines, and function declarations"). I added the following patch. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-15 09:09:21 +11:00
md: move lots of #include lines out of .h files and into .c This makes the includes more explicit, and is preparation for moving md_k.h to drivers/md/md.h Remove include/raid/md.h as its only remaining use was to #include other files. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
md: Add module.h to all files using it implicitly A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in md dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-03 13:58:33 -04:00
md: move lots of #include lines out of .h files and into .c This makes the includes more explicit, and is preparation for moving md_k.h to drivers/md/md.h Remove include/raid/md.h as its only remaining use was to #include other files. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
md/raid: use printk_ratelimited instead of printk_ratelimit As per printk_ratelimit comment, it should not be used. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md-cluster/raid10: resize all the bitmaps before start reshape To support add disk under grow mode, we need to resize all the bitmaps of each node before reshape, so that we can ensure all nodes have the same view of the bitmap of the clustered raid. So after the master node resized the bitmap, it broadcast a message to other slave nodes, and it checks the size of each bitmap are same or not by compare pages. We can only continue the reshaping after all nodes update the bitmap to the same size (by checking the pages), otherwise revert bitmap size to previous value. The resize_bitmaps interface and BITMAP_RESIZE message are introduced in md-cluster.c for the purpose. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:41 +08:00
md: add block tracing for bio_remapping The block tracing infrastructure (accessed with blktrace/blkparse) supports the tracing of mapping bios from one device to another. This is currently used when a bio in a partition is mapped to the whole device, when bios are mapped by dm, and for mapping in md/raid5. Other md personalities do not include this tracing yet, so add it. When a read-error is detected we redirect the request to a different device. This could justifiably be seen as a new mapping for the originial bio, or a secondary mapping for the bio that errors. This patch uses the second option. When md is used under dm-raid, the mappings are not traced as we do not have access to the block device number of the parent. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 13:22:04 +11:00
md: move md_k.h from include/linux/raid/ to drivers/md/ It really is nicer to keep related code together.. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
md: move headers out of include/linux/raid/ Move the headers with the local structures for the disciplines and bitmap.h into drivers/md/ so that they are more easily grepable for hacking and not far away. md.h is left where it is for now as there are some uses from the outside. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:27:03 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: rename some drivers/md/ files to have an "md-" prefix Motivated by the desire to illiminate the imprecise nature of DM-specific patches being unnecessarily sent to both the MD maintainer and mailing-list. Which is born out of the fact that DM files also reside in drivers/md/ Now all MD-specific files in drivers/md/ start with either "raid" or "md-" and the MAINTAINERS file has been updated accordingly. Shaohua: don't change module name Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-10 17:02:41 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
md/raid10: fix the 'new' raid10 layout to work correctly. In Linux 3.9 we introduce a new 'far' layout for RAID10 which was supposed to rotate the replicas differently and so provide better resilience. In particular it could survive more combinations of 2 drive failures. Unfortunately. due to a coding error, this some did what was wanted, sometimes improved less than we hoped, and sometimes - in very unlikely circumstances - put multiple replicas on the same device so the redundancy was harmed. No public user-space tool has created arrays using this layout so it is very unlikely that zero-redundancy arrays actually exist. Probably no arrays using any form of the new layout exist. But we cannot be certain. So use another bit in the 'layout' number and introduce a bug-fixed version of the layout. Also when assembling an array, if it has a zero-redundancy layout, give a warning. Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-22 13:20:15 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md/raid10: add failfast handling for writes. When writing to a fastfail device, we use MD_FASTFAIL unless it is the only device being written to. For resync/recovery, assume there was a working device to read from so always use MD_FASTFAIL. If a write for resync/recovery fails, we just fail the device - there is not much else to do. If a normal write fails, but the device cannot be marked Faulty (must be only one left), we queue for write error handling which calls narrow_write_error() to write the block synchronously without any failfast flags. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md/raid1, raid10: add blktrace records when IO is delayed Both raid1 and raid10 will sometimes delay handling an IO request, such as when resync is happening or there are too many requests queued. Add some blktrace messsages so we can see when that is happening when looking for performance artefacts. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-14 16:30:21 +11:00
md: raid1/raid10: initialize bvec table via bio_add_page() We will support multipage bvec soon, so initialize bvec table using the standardy way instead of writing the talbe directly. Otherwise it won't work any more once multipage bvec is enabled. Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-14 16:14:43 +08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
[PATCH] gfp flags annotations - part 1 - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-07 07:46:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: extend r10bio devs to raid disks Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit to all member disks and it needs to use r10bio. So extend to r10bio->devs[geo.raid_disks]. Reviewed-by: Coly Li <colyli@suse.de> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:44 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
block: remove per-queue plugging Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md-cluster: Use a small window for raid10 resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window is maintained in r10conf as cluster_sync_low and cluster_sync_high, and processed in raid10's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Set cluster_sync_high to cluster_sync_low + stripe size. 3. Send a message to all nodes so they may add it in their suspension list. Note: We only support "near" raid10 so far, resync a far or offset raid10 array could have trouble. So raid10_run checks the layout of clustered raid10, it will refuse to run if the layout is not correct. With the "near" layout we process one stripe at a time progressing monotonically through the address space. So we can have a sliding window of whole-stripes which moves through the array suspending IO on other nodes, and both resync which uses array addresses and recovery which uses device addresses can stay within this window. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:52 +08:00
Allow raid10 resync to happening in larger chunks. The raid10 resync/recovery code currently limits the amount of in-flight resync IO to 2Meg. This was copied from raid1 where it seems quite adequate. However for raid10, some layouts require a bit of seeking to perform a resync, and allowing a larger buffer size means that the seeking can be significantly reduced. There is probably no real need to limit the amount of in-flight IO at all. Any shortage of memory will naturally reduce the amount of buffer space available down to a set minimum, and any concurrent normal IO will quickly cause resync IO to back off. The only problem would be that normal IO has to wait for all resync IO to finish, so a very large amount of resync IO could cause unpleasant latency when normal IO starts up. So: increase RESYNC_DEPTH to allow 32Meg of buffer (if memory is available) which seems to be a good amount. Also reduce the amount of memory reserved as there is no need to keep 2Meg just for resync if memory is tight. Thanks to Keld for the suggestion. Cc: Keld Jørn Simonsen <keld@dkuug.dk> Signed-off-by: NeilBrown <neilb@suse.de>
2008-08-05 15:54:14 +10:00
raid10: change the size of resync window for clustered raid To align with raid1's resync window, we need to set the resync window of raid10 to 32M as well. Fixes: 8db87912c9a8 ("md-cluster: Use a small window for raid10 resync") Reported-by: Zhilong Liu <zlliu@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-01-19 11:37:56 +08:00
md-cluster: Use a small window for raid10 resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window is maintained in r10conf as cluster_sync_low and cluster_sync_high, and processed in raid10's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Set cluster_sync_high to cluster_sync_low + stripe size. 3. Send a message to all nodes so they may add it in their suspension list. Note: We only support "near" raid10 so far, resync a far or offset raid10 array could have trouble. So raid10_run checks the layout of clustered raid10, it will refuse to run if the layout is not correct. With the "near" layout we process one stripe at a time progressing monotonically through the address space. So we can have a sliding window of whole-stripes which moves through the array suspending IO on other nodes, and both resync which uses array addresses and recovery which uses device addresses can stay within this window. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] gfp flags annotations - part 1 - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-07 07:46:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove per-queue plugging Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
treewide: kmalloc() -> kmalloc_array() The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 13:55:00 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: turn bio_kmalloc into a simple kmalloc wrapper Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06 08:12:27 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: turn bio_kmalloc into a simple kmalloc wrapper Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06 08:12:27 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
block: turn bio_kmalloc into a simple kmalloc wrapper Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06 08:12:27 +02:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
block: turn bio_kmalloc into a simple kmalloc wrapper Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06 08:12:27 +02:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md/raid10: prevent access of uninitialized resync_pages offset Due to unneeded multiplication in the out_free_pages portion of r10buf_pool_alloc(), when using a 3-copy raid10 layout, it is possible to access a resync_pages offset that has not been initialized. This access translates into a crash of the system within resync_free_pages() while passing a bad pointer to put_page(). Remove the multiplication, preventing access to the uninitialized area. Fixes: f0250618361db ("md: raid10: don't use bio's vec table to manage resync pages") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: John Pittman <jpittman@redhat.com> Suggested-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-11-11 16:43:20 -08:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md/raid10: Fix memleak in r10buf_pool_alloc If the allocation of rep1_bio fails, we currently don't free the 'bio' of the same dev. Reported by kmemleak. Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:03 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Fix memleak in r10buf_pool_alloc If the allocation of rep1_bio fails, we currently don't free the 'bio' of the same dev. Reported by kmemleak. Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:03 +10:00
block: turn bio_kmalloc into a simple kmalloc wrapper Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06 08:12:27 +02:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
block: turn bio_kmalloc into a simple kmalloc wrapper Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06 08:12:27 +02:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md: raid1-10: Unify r{1,10}bio_pool_free Avoiding duplicated code, since they just execute a kfree. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:10 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
raid10: check bio in r10buf_pool_free to void NULL pointer dereference For recovery case, r10buf_pool_alloc only allocates 2 bios, so we can't access more than 2 bios in r10buf_pool_free. Otherwise, we can see NULL pointer dereference as follows: [ 98.347009] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 98.355783] IP: r10buf_pool_free+0x38/0xe0 [raid10] [...] [ 98.543734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.550161] CR2: 0000000000000050 CR3: 000000089500a001 CR4: 00000000001606f0 [ 98.558145] Call Trace: [ 98.560881] <IRQ> [ 98.563136] put_buf+0x19/0x20 [raid10] [ 98.567426] end_sync_request+0x6b/0x70 [raid10] [ 98.572591] end_sync_write+0x9b/0x160 [raid10] [ 98.577662] blk_update_request+0x78/0x2c0 [ 98.582254] scsi_end_request+0x2c/0x1e0 [scsi_mod] [ 98.587719] scsi_io_completion+0x22f/0x610 [scsi_mod] [ 98.593472] blk_done_softirq+0x8e/0xc0 [ 98.597767] __do_softirq+0xde/0x2b3 [ 98.601770] irq_exit+0xae/0xb0 [ 98.605285] do_IRQ+0x81/0xd0 [ 98.608606] common_interrupt+0x7d/0x7d [ 98.612898] </IRQ> So we need to check the bio is valid or not before the bio is used in r10buf_pool_free. Another workable way is to free 2 bios for recovery case just like r10buf_pool_alloc. Fixes: f0250618361d ("md: raid10: don't use bio's vec table to manage resync pages") Reported-by: Alexis Castilla <pencerval@gmail.com> Tested-by: Alexis Castilla <pencerval@gmail.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-04-26 10:56:37 +08:00
block: turn bio_kmalloc into a simple kmalloc wrapper Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06 08:12:27 +02:00
raid10: check bio in r10buf_pool_free to void NULL pointer dereference For recovery case, r10buf_pool_alloc only allocates 2 bios, so we can't access more than 2 bios in r10buf_pool_free. Otherwise, we can see NULL pointer dereference as follows: [ 98.347009] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 98.355783] IP: r10buf_pool_free+0x38/0xe0 [raid10] [...] [ 98.543734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.550161] CR2: 0000000000000050 CR3: 000000089500a001 CR4: 00000000001606f0 [ 98.558145] Call Trace: [ 98.560881] <IRQ> [ 98.563136] put_buf+0x19/0x20 [raid10] [ 98.567426] end_sync_request+0x6b/0x70 [raid10] [ 98.572591] end_sync_write+0x9b/0x160 [raid10] [ 98.577662] blk_update_request+0x78/0x2c0 [ 98.582254] scsi_end_request+0x2c/0x1e0 [scsi_mod] [ 98.587719] scsi_io_completion+0x22f/0x610 [scsi_mod] [ 98.593472] blk_done_softirq+0x8e/0xc0 [ 98.597767] __do_softirq+0xde/0x2b3 [ 98.601770] irq_exit+0xae/0xb0 [ 98.605285] do_IRQ+0x81/0xd0 [ 98.608606] common_interrupt+0x7d/0x7d [ 98.612898] </IRQ> So we need to check the bio is valid or not before the bio is used in r10buf_pool_free. Another workable way is to free 2 bios for recovery case just like r10buf_pool_alloc. Fixes: f0250618361d ("md: raid10: don't use bio's vec table to manage resync pages") Reported-by: Alexis Castilla <pencerval@gmail.com> Tested-by: Alexis Castilla <pencerval@gmail.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-04-26 10:56:37 +08:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
block: turn bio_kmalloc into a simple kmalloc wrapper Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06 08:12:27 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md: raid1-10: Unify r{1,10}bio_pool_free Avoiding duplicated code, since they just execute a kfree. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:10 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: extend r10bio devs to raid disks Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit to all member disks and it needs to use r10bio. So extend to r10bio->devs[geo.raid_disks]. Reviewed-by: Coly Li <colyli@suse.de> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:44 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: prevent unnecessary calls to wake_up() in fast path Currently, wake_up() is called unconditionally in fast path such as raid10_make_request(), which will cause lock contention under high concurrency: raid10_make_request wake_up __wake_up_common_lock spin_lock_irqsave Improve performance by only call wake_up() if waitqueue is not empty in allow_barrier() and raid10_make_request(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:26 +08:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: wake up frozen array When rescheduling a bio in raid10, we wake up the md thread, but if the array is frozen, this will have no effect. This causes the array to remain frozen for eternity. We add a wake_up to allow the array to de-freeze. This code is nearly identical to the raid1 code, which has this fix already. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-25 12:03:38 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: stop using bi_phys_segments raid10 currently repurposes bi_phys_segments on each incoming bio to count how many r10bio was used to encode the request. We need to know when the number of attached r10bio reaches zero to: 1/ call bio_endio() when all IO on the bio is finished 2/ decrement ->nr_pending so that resync IO can proceed. Now that the bio has its own __bi_remaining counter, that can be used instead. We can call bio_inc_remaining to increment the counter and call bio_endio() every time an r10bio completes, rather than only when bi_phys_segments reaches zero. This addresses point 1, but not point 2. bio_endio() doesn't (and cannot) report when the last r10bio has finished, so a different approach is needed. So: instead of counting bios in ->nr_pending, count r10bios. i.e. every time we attach a bio, increment nr_pending. Every time an r10bio completes, decrement nr_pending. Normally we only increment nr_pending after first checking that ->barrier is zero, or some other non-trivial tests and possible waiting. When attaching multiple r10bios to a bio, we only need the tests and the waiting once. After the first increment, subsequent increments can happen unconditionally as they are really all part of the one request. So introduce inc_pending() which can be used when we know that nr_pending is already elevated. Note that this fixes a bug. freeze_array() contains the line atomic_read(&conf->nr_pending) == conf->nr_queued+extra, which implies that the units for ->nr_pending, ->nr_queued and extra are the same. ->nr_queue and extra count r10_bios, but prior to this patch, ->nr_pending counted bios. If a bio ever resulted in multiple r10_bios (due to bad blocks), freeze_array() would not work correctly. Now it does. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-15 14:05:13 +11:00
md/raid10: enable io accounting For raid10, we record the start time between split bio and clone bio, and finish the accounting in the final endio. Also introduce start_time in r10bio accordingly. Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Signed-off-by: Song Liu <song@kernel.org>
2021-05-25 17:46:22 +08:00
md/raid10: stop using bi_phys_segments raid10 currently repurposes bi_phys_segments on each incoming bio to count how many r10bio was used to encode the request. We need to know when the number of attached r10bio reaches zero to: 1/ call bio_endio() when all IO on the bio is finished 2/ decrement ->nr_pending so that resync IO can proceed. Now that the bio has its own __bi_remaining counter, that can be used instead. We can call bio_inc_remaining to increment the counter and call bio_endio() every time an r10bio completes, rather than only when bi_phys_segments reaches zero. This addresses point 1, but not point 2. bio_endio() doesn't (and cannot) report when the last r10bio has finished, so a different approach is needed. So: instead of counting bios in ->nr_pending, count r10bios. i.e. every time we attach a bio, increment nr_pending. Every time an r10bio completes, decrement nr_pending. Normally we only increment nr_pending after first checking that ->barrier is zero, or some other non-trivial tests and possible waiting. When attaching multiple r10bios to a bio, we only need the tests and the waiting once. After the first increment, subsequent increments can happen unconditionally as they are really all part of the one request. So introduce inc_pending() which can be used when we know that nr_pending is already elevated. Note that this fixes a bug. freeze_array() contains the line atomic_read(&conf->nr_pending) == conf->nr_queued+extra, which implies that the units for ->nr_pending, ->nr_queued and extra are the same. ->nr_queue and extra count r10_bios, but prior to this patch, ->nr_pending counted bios. If a bio ever resulted in multiple r10_bios (due to bad blocks), freeze_array() would not work correctly. Now it does. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-15 14:05:13 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: factor out common bio handling code When normal-write and sync-read/write bio completes, we should find out the disk number the bio belongs to. Factor those common code out to a separate function. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:47 +10:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: factor out common bio handling code When normal-write and sync-read/write bio completes, we should find out the disk number the bio belongs to. Factor those common code out to a separate function. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:47 +10:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: factor out common bio handling code When normal-write and sync-read/write bio completes, we should find out the disk number the bio belongs to. Factor those common code out to a separate function. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:47 +10:00
md/raid10: extend r10bio devs to raid disks Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit to all member disks and it needs to use r10bio. So extend to r10bio->devs[geo.raid_disks]. Reviewed-by: Coly Li <colyli@suse.de> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:44 +08:00
md/raid10: factor out common bio handling code When normal-write and sync-read/write bio completes, we should find out the disk number the bio belongs to. Factor those common code out to a separate function. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:47 +10:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: factor out common bio handling code When normal-write and sync-read/write bio completes, we should find out the disk number the bio belongs to. Factor those common code out to a separate function. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:47 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: factor out common bio handling code When normal-write and sync-read/write bio completes, we should find out the disk number the bio belongs to. Factor those common code out to a separate function. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:47 +10:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md: raid10: remove a couple of redundant variables and initializations Variables dev and bio_last_sector are assigned values that are never read and hence these are redundant variables and can be removed. Also remove the duplicated initialization of sectors, the latter assignment is identical to the first and can be removed. Cleans up 3 clang build warnings: Value stored to 'dev' is never read Value stored to 'bio_last_sector' is never read Value stored to 'sectors' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-11 11:46:54 +01:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: some tidying up in fix_read_error Currently the rdev on which a read error happened could be removed before we perform the fix_error handling. This requires extra tests for NULL. So delay the rdev_dec_pending call until after the call to fix_read_error so that we can be sure that the rdev still exists. This allows an 'if' clause to be removed so the body gets re-indented back one level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:53:17 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid: use printk_ratelimited instead of printk_ratelimit As per printk_ratelimit comment, it should not be used. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid: use printk_ratelimited instead of printk_ratelimit As per printk_ratelimit comment, it should not be used. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md/raid10: unify handling of write completion. A write can complete at two different places: 1/ when the last member-device write completes, through raid10_end_write_request 2/ in make_request() when we remove the initial bias from ->remaining. These two should do exactly the same thing and the comment says they do, but they don't. So factor the correct code out into a function and call it in both places. This makes the code much more similar to RAID1. The difference is only significant if there is an error, and they usually take a while, so it is unlikely that there will be an error already when make_request is completing, so this is unlikely to cause real problems. Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10 17:21:17 +10:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md/raid10: factor out common bio handling code When normal-write and sync-read/write bio completes, we should find out the disk number the bio belongs to. Factor those common code out to a separate function. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:47 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add failfast handling for writes. When writing to a fastfail device, we use MD_FASTFAIL unless it is the only device being written to. For resync/recovery, assume there was a working device to read from so always use MD_FASTFAIL. If a write for resync/recovery fails, we just fail the device - there is not much else to do. If a normal write fails, but the device cannot be marked Faulty (must be only one left), we queue for write error handling which calls narrow_write_error() to write the block synchronously without any failfast flags. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
RAID10: ignore discard error This is the counterpart of raid10 fix. If a write error occurs, raid10 will try to rewrite the bio in small chunk size. If the rewrite fails, raid10 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Cc: Sitsofe Wheeler <sitsofe@gmail.com> Cc: stable@vger.kernel.org (v3.6) Signed-off-by: Shaohua Li <shli@fb.com>
2016-10-06 14:13:52 -07:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: If there is a spare and a want_replacement device, start replacement. When attempting to add a spare to a RAID10 array, also consider adding it as a replacement for a want_replacement device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
md/raid10: add failfast handling for writes. When writing to a fastfail device, we use MD_FASTFAIL unless it is the only device being written to. For resync/recovery, assume there was a working device to read from so always use MD_FASTFAIL. If a write for resync/recovery fails, we just fail the device - there is not much else to do. If a normal write fails, but the device cannot be marked Faulty (must be only one left), we queue for write error handling which calls narrow_write_error() to write the block synchronously without any failfast flags. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add failfast handling for writes. When writing to a fastfail device, we use MD_FASTFAIL unless it is the only device being written to. For resync/recovery, assume there was a working device to read from so always use MD_FASTFAIL. If a write for resync/recovery fails, we just fail the device - there is not much else to do. If a normal write fails, but the device cannot be marked Faulty (must be only one left), we queue for write error handling which calls narrow_write_error() to write the block synchronously without any failfast flags. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: end bio when the device faulty Just like raid1, we do not queue write error bio to retry write and acknowlege badblocks, when the device is faulty. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-07-19 13:48:47 +08:00
md/raid10: add failfast handling for writes. When writing to a fastfail device, we use MD_FASTFAIL unless it is the only device being written to. For resync/recovery, assume there was a working device to read from so always use MD_FASTFAIL. If a write for resync/recovery fails, we just fail the device - there is not much else to do. If a normal write fails, but the device cannot be marked Faulty (must be only one left), we queue for write error handling which calls narrow_write_error() to write the block synchronously without any failfast flags. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: end bio when the device faulty Just like raid1, we do not queue write error bio to retry write and acknowlege badblocks, when the device is faulty. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-07-19 13:48:47 +08:00
md/raid10: properly indicate failure when ending a failed write request Similar to [1], this patch fixes the same bug in raid10. Also cleanup the comments. [1] commit 2417b9869b81 ("md/raid1: properly indicate failure when ending a failed write request") Cc: stable@vger.kernel.org Fixes: 7cee6d4e6035 ("md/raid10: end bio when the device faulty") Signed-off-by: Wei Shuyu <wsy@dogben.com> Acked-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Signed-off-by: Song Liu <song@kernel.org>
2021-06-28 15:15:08 +08:00
md/raid10: end bio when the device faulty Just like raid1, we do not queue write error bio to retry write and acknowlege badblocks, when the device is faulty. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-07-19 13:48:47 +08:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. Without that fix, the following scenario could happen: - RAID1 with drives A and B; drive B was freshly-added and is rebuilding - Drive A fails - WRITE request arrives to the array. It is failed by drive A, so r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B succeeds in writing it, so the same r1_bio is marked as R1BIO_Uptodate. - r1_bio arrives to handle_write_finished, badblocks are disabled, md_error()->error() does nothing because we don't fail the last drive of raid1 - raid_end_bio_io() calls call_bio_endio() - As a result, in call_bio_endio(): if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) clear_bit(BIO_UPTODATE, &bio->bi_flags); this code doesn't clear the BIO_UPTODATE flag, and the whole master WRITE succeeds, back to the upper layer. So we returned success to the upper layer, even though we had written the data onto the rebuilding drive only. But when we want to read the data back, we would not read from the rebuilding drive, so this data is lost. [neilb - applied identical change to raid10 as well] This bug can result in lost data, so it is suitable for any -stable kernel. Cc: stable@vger.kernel.org Signed-off-by: Alex Lyakas <alex@zadarastorage.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-04 20:42:21 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
RAID10: ignore discard error This is the counterpart of raid10 fix. If a write error occurs, raid10 will try to rewrite the bio in small chunk size. If the rewrite fails, raid10 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Cc: Sitsofe Wheeler <sitsofe@gmail.com> Cc: stable@vger.kernel.org (v3.6) Signed-off-by: Shaohua Li <shli@fb.com>
2016-10-06 14:13:52 -07:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: unify handling of write completion. A write can complete at two different places: 1/ when the last member-device write completes, through raid10_end_write_request 2/ in make_request() when we remove the initial bias from ->remaining. These two should do exactly the same thing and the comment says they do, but they don't. So factor the correct code out into a function and call it in both places. This makes the code much more similar to RAID1. The difference is only significant if there is an error, and they usually take a while, so it is unlikely that there will be an error already when make_request is completing, so this is unlikely to cause real problems. Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10 17:21:17 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: decrement correct pending counter when writing to replacement. When a write to a replacement device completes, we carefully and correctly found the rdev that the write actually went to and the blithely called rdev_dec_pending on the primary rdev, even if this write was to the replacement. This means that any writes to an array while a replacement was ongoing would cause the nr_pending count for the primary device to go negative, so it could never be removed. This bug has been present since replacement was introduced in 3.3, so it is suitable for any -stable kernel since then. Reported-by: "George Spelvin" <linux@horizon.com> Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 15:12:09 +11:00
md/raid10: add failfast handling for writes. When writing to a fastfail device, we use MD_FASTFAIL unless it is the only device being written to. For resync/recovery, assume there was a working device to read from so always use MD_FASTFAIL. If a write for resync/recovery fails, we just fail the device - there is not much else to do. If a normal write fails, but the device cannot be marked Faulty (must be only one left), we queue for write error handling which calls narrow_write_error() to write the block synchronously without any failfast flags. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30 22:57:33 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30 22:57:33 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2) MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2) This patch addresses raid arrays that have a number of devices that cannot be evenly divided by 'far_copies'. (E.g. 5 devices, far_copies = 2) This case must be handled differently because it causes that last set to be of a different size than the rest of the sets. We must compute a new modulo for this last set so that copied chunks are properly wrapped around. Example use_far_sets=1, far_copies=2, near_copies=1, devices=5: "far" algorithm dev1 dev2 dev3 dev4 dev5 ==== ==== ==== ==== ==== [ A B ] [ C D E ] [ G H ] [ I J K ] ... [ B A ] [ E C D ] --> nominal set of 2 and last set of 3 [ H G ] [ K I J ] []'s show far/offset sets Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD RAID10: Minor non-functional code changes Changes include assigning 'addr' from 's' instead of 'sector' to be consistent with the way the code does it just a few lines later and using '%=' vs a conditional and subtraction. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:09 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2) MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2) This patch addresses raid arrays that have a number of devices that cannot be evenly divided by 'far_copies'. (E.g. 5 devices, far_copies = 2) This case must be handled differently because it causes that last set to be of a different size than the rest of the sets. We must compute a new modulo for this last set so that copied chunks are properly wrapped around. Example use_far_sets=1, far_copies=2, near_copies=1, devices=5: "far" algorithm dev1 dev2 dev3 dev4 dev5 ==== ==== ==== ==== ==== [ A B ] [ C D E ] [ G H ] [ I J K ] ... [ B A ] [ E C D ] --> nominal set of 2 and last set of 3 [ H G ] [ K I J ] []'s show far/offset sets Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2) MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2) This patch addresses raid arrays that have a number of devices that cannot be evenly divided by 'far_copies'. (E.g. 5 devices, far_copies = 2) This case must be handled differently because it causes that last set to be of a different size than the rest of the sets. We must compute a new modulo for this last set so that copied chunks are properly wrapped around. Example use_far_sets=1, far_copies=2, near_copies=1, devices=5: "far" algorithm dev1 dev2 dev3 dev4 dev5 ==== ==== ==== ==== ==== [ A B ] [ C D E ] [ G H ] [ I J K ] ... [ B A ] [ E C D ] --> nominal set of 2 and last set of 3 [ H G ] [ K I J ] []'s show far/offset sets Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1) The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe widths - copying them to a different location on the same devices after shifting the stripe. An example layout of each follows below: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... F A B C D E --> Copy of stripe0, but shifted by 1 L G H I J K ... "offset" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F F A B C D E --> Copy of stripe0, but shifted by 1 G H I J K L L G H I J K ... Redundancy for these algorithms is gained by shifting the copied stripes one device to the right. This patch proposes that array be divided into sets of adjacent devices and when the stripe copies are shifted, they wrap on set boundaries rather than the array size boundary. That is, for the purposes of shifting, the copies are confined to their sets within the array. The sets are 'near_copies * far_copies' in size. The above "far" algorithm example would change to: "far" algorithm dev1 dev2 dev3 dev4 dev5 dev6 ==== ==== ==== ==== ==== ==== A B C D E F G H I J K L ... B A D C F E --> Copy of stripe0, shifted 1, 2-dev sets H G J I L K Dev sets are 1-2, 3-4, 5-6 ... This has the affect of improving the redundancy of the array. We can always sustain at least one failure, but sometimes more than one can be handled. In the first examples, the pairs of devices that CANNOT fail together are: (1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs] In the example where the copies are confined to sets, the pairs of devices that cannot fail together are: (1,2) (3,4) (5,6) [20% of possible pairs] We cannot simply replace the old algorithms, so the 17th bit of the 'layout' variable is used to indicate whether we use the old or new method of computing the shift. (This is similar to the way the 16th bit indicates whether the "far" algorithm or the "offset" algorithm is being used.) This patch only handles the cases where the number of total raid disks is a multiple of 'far_copies'. A follow-on patch addresses the condition where this is not true. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 13:28:10 +11:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: change read_balance to return an rdev It makes more sense to return an rdev than just an index as read_balance() gets a reference to the rdev and so returning the pointer make this more idiomatic. This will be needed in a future patch when we might return a 'replacement' rdev instead of the main rdev. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Fix read balancing in RAID1 and RAID10 on drives > 2TB read_balance uses a "unsigned long" for a sector number which will get truncated beyond 2TB. This will cause read-balancing to be non-optimal, and can cause data to be read from the 'wrong' branch during a resync. This has a very small chance of returning wrong data. Reported-by: Jordan Russell <jr-list-2010@quo.to> Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-08 08:20:17 +10:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md-cluster/raid10: set "do_balance = 0" if area is resyncing Just like clustered raid1, it is impossible for cluster raid10 to choose the best device for read balance when the area of array is resyncing. Because we cannot trust the data to be the same on all devices at that time, so we choose just the first one to use, so set do_balance to 0. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:50 +08:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: handle merge_bvec_fn in member devices. Currently we don't honour merge_bvec_fn in member devices so if there is one, we force all requests to be single-page at most. This is not ideal. So enhance the raid10 merge_bvec_fn to check that function in children as well. This introduces a small problem. There is no locking around calls the ->merge_bvec_fn and subsequent calls to ->make_request. So a device added between these could end up getting a request which violates its merge_bvec_fn. Currently the best we can do is synchronize_sched(). This will work providing no preemption happens. If there is preemption, we just have to hope that new devices are largely consistent with old devices. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
block: kill merge_bvec_fn() completely As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely. Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@kernel.org> Cc: ceph-devel@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: also remove ->merge_bvec_fn() in dm-thin as well as dm-era-target, and resolve merge conflicts] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-27 23:48:34 -07:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: add a bdev_nonrot helper Add a helper to check the nonrot flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-15 06:52:42 +02:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
[PATCH] md: improve read speed to raid10 arrays using 'far copies' raid10 has two different layouts. One uses near-copies (so multiple copies of a block are at the same or similar offsets of different devices) and the other uses far-copies (so multiple copies of a block are stored a greatly different offsets on different devices). The point of far-copies is that it allows the first section (normally first half) to be layed out in normal raid0 style, and thus provide raid0 sequential read performance. Unfortunately, the read balancing in raid10 makes some poor decisions for far-copies arrays and you don't get the desired performance. So turn off that bad bit of read_balance for far-copies arrays. With this patch, read speed of an 'f2' array is comparable with a raid0 with the same number of devices, though write speed is ofcourse still very slow. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-28 13:44:09 -08:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md: don't attempt read-balancing for raid10 'far' layouts This patch changes the disk to be read for layout "far > 1" to always be the disk with the lowest block address. Thus the chunks to be read will always be (for a fully functioning array) from the first band of stripes, and the raid will then work as a raid0 consisting of the first band of stripes. Some advantages: The fastest part which is the outer sectors of the disks involved will be used. The outer blocks of a disk may be as much as 100 % faster than the inner blocks. Average seek time will be smaller, as seeks will always be confined to the first part of the disks. Mixed disks with different performance characteristics will work better, as they will work as raid0, the sequential read rate will be number of disks involved times the IO rate of the slowest disk. If a disk is malfunctioning, the first disk which is working, and has the lowest block address for the logical block will be used. Signed-off-by: Keld Simonsen <keld@dkuug.dk> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:34 -08:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md: don't attempt read-balancing for raid10 'far' layouts This patch changes the disk to be read for layout "far > 1" to always be the disk with the lowest block address. Thus the chunks to be read will always be (for a fully functioning array) from the first band of stripes, and the raid will then work as a raid0 consisting of the first band of stripes. Some advantages: The fastest part which is the outer sectors of the disks involved will be used. The outer blocks of a disk may be as much as 100 % faster than the inner blocks. Average seek time will be smaller, as seeks will always be confined to the first part of the disks. Mixed disks with different performance characteristics will work better, as they will work as raid0, the sequential read rate will be number of disks involved times the IO rate of the slowest disk. If a disk is malfunctioning, the first disk which is working, and has the lowest block address for the logical block will be used. Signed-off-by: Keld Simonsen <keld@dkuug.dk> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:34 -08:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: read balance chooses idlest disk for SSD Andy reported that raid10 array with SSD disks has poor read performance. Compared with raid1, RAID-1 can be 3x faster than RAID-10 sometimes [1]. The thing is that raid10 chooses the low distance disk for read request, however, the approach doesn't work well for SSD device since it doesn't have spindle like HDD, we should just read from the SSD which has less pending IO like commit 9dedf60313fa4 ("md/raid1: read balance chooses idlest disk for SSD"). So this commit selects the idlest SSD disk for read if array has none rotational disk, otherwise, read_balance uses the previous distance priority algorithm. With the change, the performance of raid10 gets increased largely per Andy's test [2]. [1]. https://marc.info/?l=linux-raid&m=155915890004761&w=2 [2]. https://marc.info/?l=linux-raid&m=155990654223786&w=2 Tested-by: Andy Smith <andy@strugglers.net> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:11 -07:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: simplify raid10 read_balance raid10 read balance has two different loop for looking through possible devices to chose the best. Collapse those into one loop and generally make the code more readable. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
md/raid10: change read_balance to return an rdev It makes more sense to return an rdev than just an index as read_balance() gets a reference to the rdev and so returning the pointer make this more idiomatic. This will be needed in a future patch when we might return a 'replacement' rdev instead of the main rdev. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: change read_balance to return an rdev It makes more sense to return an rdev than just an index as read_balance() gets a reference to the rdev and so returning the pointer make this more idiomatic. This will be needed in a future patch when we might return a 'replacement' rdev instead of the main rdev. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
md/raid1/10: add missed blk plug flush_pending_writes isn't always called with block plug, so add it, and plug works in nested way. Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-01 12:12:34 -08:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
md/raid1/10: add missed blk plug flush_pending_writes isn't always called with block plug, so add it, and plug works in nested way. Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-01 12:12:34 -08:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
md/raid1,raid10: silence warning about wait-within-wait If you prepare_to_wait() after a previous prepare_to_wait(), but before calling schedule(), you get warning: do not call blocking ops when !TASK_RUNNING; state=2 This is appropriate as it is often a bug. The event that the first prepare_to_wait() expects might wake up the schedule following the second prepare_to_wait(), which could be confusing. However if both prepare_to_wait()s are part of simple wait_event() loops, and if the inner one is rarely called, then there is no problem. The inner loop is too simple to get confused by a stray wakeup, and the outer loop won't spin unduly because the inner doesnt affect it often. This pattern occurs in both raid1.c and raid10.c in the use of flush_pending_writes(). The warning can be silenced by setting current->state to TASK_RUNNING. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-04 08:21:04 +11:00
md/raid1/10: add missed blk plug flush_pending_writes isn't always called with block plug, so add it, and plug works in nested way. Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-01 12:12:34 -08:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md: add proper write-congestion reporting to RAID1 and RAID10. RAID1 and RAID10 handle write requests by queuing them for handling by a separate thread. This is because when a write-intent-bitmap is active we might need to update the bitmap first, so it is good to queue a lot of writes, then do one big bitmap update for them all. However writeback request devices to appear to be congested after a while so it can make some guesstimate of throughput. The infinite queue defeats that (note that RAID5 has already has a finite queue so it doesn't suffer from this problem). So impose a limit on the number of pending write requests. By default it is 1024 which seems to be generally suitable. Make it configurable via module option just in case someone finds a regression. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:50:01 +11:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
block: store a block_device pointer in struct bio Replace the gendisk pointer in struct bio with a pointer to the newly improved struct block device. From that the gendisk can be trivially accessed with an extra indirection, but it also allows to directly look up all information related to partition remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24 11:02:34 +01:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md/raid10: abort delayed writes when device fails. When writing to an array with a bitmap enabled, the writes are grouped in batches which are preceded by an update to the bitmap. It is quite likely if that a drive develops a problem which is not media related, that the bitmap write will be the first to report an error and cause the device to be marked faulty (as the bitmap write is at the start of a batch). In this case, there is point submiting the subsequent writes to the failed device - that just wastes times. So re-check the Faulty state of a device before submitting a delayed write. This requires that we keep the 'rdev', rather than the 'bdev' in the bio, then swap in the bdev just before final submission. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-04 16:46:03 +11:00
md: simplify code with bio_io_error Since bio_io_error sets bi_status to BLK_STS_IOERR, and calls bio_endio, so we can use it directly. And as mentioned by Shaohua, there are also two places in raid5.c can use bio_io_error either. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-21 16:33:44 +08:00
md/raid10: abort delayed writes when device fails. When writing to an array with a bitmap enabled, the writes are grouped in batches which are preceded by an update to the bitmap. It is quite likely if that a drive develops a problem which is not media related, that the bitmap write will be the first to report an error and cause the device to be marked faulty (as the bitmap write is at the start of a batch). In this case, there is point submiting the subsequent writes to the failed device - that just wastes times. So re-check the Faulty state of a device before submitting a delayed write. This requires that we keep the 'rdev', rather than the 'bdev' in the bio, then swap in the bdev just before final submission. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-04 16:46:03 +11:00
block: remove QUEUE_FLAG_DISCARD Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-15 06:52:55 +02:00
md: raid 10 supports TRIM This makes md raid 10 support TRIM. If one disk supports discard and another not, or one has discard_zero_data and another not, there could be inconsistent between data from such disks. But this should not matter, discarded data is useless. This will add extra copy in rebuild though. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:30:52 +11:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
md: raid 10 supports TRIM This makes md raid 10 support TRIM. If one disk supports discard and another not, or one has discard_zero_data and another not, there could be inconsistent between data from such disks. But this should not matter, discarded data is useless. This will add extra copy in rebuild though. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:30:52 +11:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
md/raid1/10: add missed blk plug flush_pending_writes isn't always called with block plug, so add it, and plug works in nested way. Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-01 12:12:34 -08:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
block: remove per-queue plugging Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md: fix up raid1/raid10 unplugging. We just need to make sure that an unplug event wakes up the md thread, which is exactly what mddev_check_plugged does. Also remove some plug-related code that is no longer needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:43 +10:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md/raid10: factor out code from wait_barrier() to stop_waiting_barrier() Currently the nasty condition in wait_barrier() is hard to read. This patch factors out the condition into a function. There are no functional changes. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:24 +08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: don't modify 'nr_waitng' in wait_barrier() for the case nowait For the case nowait in wait_barrier(), there is no point to increase nr_waiting and then decrease it. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:25 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
md/raid10: don't modify 'nr_waitng' in wait_barrier() for the case nowait For the case nowait in wait_barrier(), there is no point to increase nr_waiting and then decrease it. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:25 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
raid10: improve random reads performance RAID10 random read performance is lower than expected due to excessive spinlock utilisation which is required mostly for rebuild/resync. Simplify allow_barrier as it's in IO path and encounters a lot of unnecessary congestion. As lower_barrier just takes a lock in order to decrement a counter, convert counter (nr_pending) into atomic variable and remove the spin lock. There is also a congestion for wake_up (it uses lock internally) so call it only when it's really needed. As wake_up is not called constantly anymore, ensure process waiting to raise a barrier is notified when there are no more waiting IOs. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-24 14:20:16 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
raid10: improve random reads performance RAID10 random read performance is lower than expected due to excessive spinlock utilisation which is required mostly for rebuild/resync. Simplify allow_barrier as it's in IO path and encounters a lot of unnecessary congestion. As lower_barrier just takes a lock in order to decrement a counter, convert counter (nr_pending) into atomic variable and remove the spin lock. There is also a congestion for wake_up (it uses lock internally) so call it only when it's really needed. As wake_up is not called constantly anymore, ensure process waiting to raise a barrier is notified when there are no more waiting IOs. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-24 14:20:16 +02:00
md/raid10: prevent unnecessary calls to wake_up() in fast path Currently, wake_up() is called unconditionally in fast path such as raid10_make_request(), which will cause lock contention under high concurrency: raid10_make_request wake_up __wake_up_common_lock spin_lock_irqsave Improve performance by only call wake_up() if waitqueue is not empty in allow_barrier() and raid10_make_request(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:26 +08:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
md/raid1,raid10: use freeze_array in place of raise_barrier in various places. Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b66152f87c7 (raid10) and 6b740b8d79252f13 (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-12 11:01:22 +10:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
[PATCH] md: fix typo in comment Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:42 -08:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
md/raid1,raid10: use freeze_array in place of raise_barrier in various places. Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b66152f87c7 (raid10) and 6b740b8d79252f13 (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-12 11:01:22 +10:00
md: fix possible raid1/raid10 deadlock on read error during resync Thanks to K.Tanaka and the scsi fault injection framework, here is a fix for another possible deadlock in raid1/raid10 error handing. If a read request returns an error while a resync is happening and a resync request is pending, the attempt to fix the error will block until the resync progresses, and the resync will block until the read request completes. Thus a deadlock. This patch fixes the problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:35 -08:00
md/raid1,raid10: use freeze_array in place of raise_barrier in various places. Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b66152f87c7 (raid10) and 6b740b8d79252f13 (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-12 11:01:22 +10:00
md: fix possible raid1/raid10 deadlock on read error during resync Thanks to K.Tanaka and the scsi fault injection framework, here is a fix for another possible deadlock in raid1/raid10 error handing. If a read request returns an error while a resync is happening and a resync request is pending, the attempt to fix the error will block until the resync progresses, and the resync will block until the read request completes. Thus a deadlock. This patch fixes the problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:35 -08:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
raid10: improve random reads performance RAID10 random read performance is lower than expected due to excessive spinlock utilisation which is required mostly for rebuild/resync. Simplify allow_barrier as it's in IO path and encounters a lot of unnecessary congestion. As lower_barrier just takes a lock in order to decrement a counter, convert counter (nr_pending) into atomic variable and remove the spin lock. There is also a congestion for wake_up (it uses lock internally) so call it only when it's really needed. As wake_up is not called constantly anymore, ensure process waiting to raise a barrier is notified when there are no more waiting IOs. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-24 14:20:16 +02:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
raid10: improve random reads performance RAID10 random read performance is lower than expected due to excessive spinlock utilisation which is required mostly for rebuild/resync. Simplify allow_barrier as it's in IO path and encounters a lot of unnecessary congestion. As lower_barrier just takes a lock in order to decrement a counter, convert counter (nr_pending) into atomic variable and remove the spin lock. There is also a congestion for wake_up (it uses lock internally) so call it only when it's really needed. As wake_up is not called constantly anymore, ensure process waiting to raise a barrier is notified when there are no more waiting IOs. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-24 14:20:16 +02:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: submit IO from originating thread instead of md thread. queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. This is nearly identical to a recent patch which provided similar functionality to RAID1. Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:32:13 +11:00
md: raid1/raid10: drop pending_cnt Those counters are not necessary after commit 11bb45e8aaf6 ("md: drop queue limitation for RAID1 and RAID10"). Remove them from all code (conf and plug structs). raid1_plug_cb and raid10_plug_cb are identical, so move definition of raid1_plug_cb to common raid1-10 definitions and use it for RAID10 too. Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org>
2022-01-17 12:38:47 +01:00
md/raid10: submit IO from originating thread instead of md thread. queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. This is nearly identical to a recent patch which provided similar functionality to RAID1. Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:32:13 +11:00
md/raid1{,0}: fix deadlock in bitmap_unplug. If the raid1 or raid10 unplug function gets called from a make_request function (which is very possible) when there are bios on the current->bio_list list, then it will not be able to successfully call bitmap_unplug() and it could need to submit more bios and wait for them to complete. But they won't complete while current->bio_list is non-empty. So detect that case and handle the unplugging off to another thread just like we already do when called from within the scheduler. RAID1 version of bug was introduced in 3.6, so that part of fix is suitable for 3.6.y. RAID10 part won't apply. Cc: stable@vger.kernel.org Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Reported-by: Peter Maloney <peter.maloney@brockmann-consult.de> Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-27 12:14:40 +11:00
md/raid10: submit IO from originating thread instead of md thread. queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. This is nearly identical to a recent patch which provided similar functionality to RAID1. Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:32:13 +11:00
md/raid1,raid10: fix deadlock with freeze_array() When raid1/raid10 needs to fix a read error, it first drains all pending requests by calling freeze_array(). This calls flush_pending_writes() if it needs to sleep, but some writes may be pending in a per-process plug rather than in the per-array request queue. When raid1{,0}_unplug() moves the request from the per-process plug to the per-array request queue (from which flush_pending_writes() can flush them), it needs to wake up freeze_array(), or freeze_array() will never flush them and so it will block forever. So add the requires wake_up() calls. This bug was introduced by commit f54a9d0e59c4bea3db733921ca9147612a6f292c for raid1 and a similar commit for RAID10, and so has been present since linux-3.6. As the bug causes a deadlock I believe this fix is suitable for -stable. Cc: stable@vger.kernel.org (3.6.y 3.7.y 3.8.y) Reported-by: Tregaron Bayly <tbayly@bluehost.com> Tested-by: Tregaron Bayly <tbayly@bluehost.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-25 12:38:29 +11:00
md/raid10: submit IO from originating thread instead of md thread. queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. This is nearly identical to a recent patch which provided similar functionality to RAID1. Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:32:13 +11:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md/raid10: submit IO from originating thread instead of md thread. queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. This is nearly identical to a recent patch which provided similar functionality to RAID1. Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:32:13 +11:00
block: store a block_device pointer in struct bio Replace the gendisk pointer in struct bio with a pointer to the newly improved struct block device. From that the gendisk can be trivially accessed with an extra indirection, but it also allows to directly look up all information related to partition remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24 11:02:34 +01:00
md/raid10: submit IO from originating thread instead of md thread. queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. This is nearly identical to a recent patch which provided similar functionality to RAID1. Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:32:13 +11:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md/raid10: abort delayed writes when device fails. When writing to an array with a bitmap enabled, the writes are grouped in batches which are preceded by an update to the bitmap. It is quite likely if that a drive develops a problem which is not media related, that the bitmap write will be the first to report an error and cause the device to be marked faulty (as the bitmap write is at the start of a batch). In this case, there is point submiting the subsequent writes to the failed device - that just wastes times. So re-check the Faulty state of a device before submitting a delayed write. This requires that we keep the 'rdev', rather than the 'bdev' in the bio, then swap in the bdev just before final submission. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-04 16:46:03 +11:00
md: simplify code with bio_io_error Since bio_io_error sets bi_status to BLK_STS_IOERR, and calls bio_endio, so we can use it directly. And as mentioned by Shaohua, there are also two places in raid5.c can use bio_io_error either. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-21 16:33:44 +08:00
md/raid10: abort delayed writes when device fails. When writing to an array with a bitmap enabled, the writes are grouped in batches which are preceded by an update to the bitmap. It is quite likely if that a drive develops a problem which is not media related, that the bitmap write will be the first to report an error and cause the device to be marked faulty (as the bitmap write is at the start of a batch). In this case, there is point submiting the subsequent writes to the failed device - that just wastes times. So re-check the Faulty state of a device before submitting a delayed write. This requires that we keep the 'rdev', rather than the 'bdev' in the bio, then swap in the bdev just before final submission. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-04 16:46:03 +11:00
block: remove QUEUE_FLAG_DISCARD Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-15 06:52:55 +02:00
MD: ignore discard request for hard disks of hybid raid1/raid10 array In SSD/hard disk hybid storage, discard request should be ignored for hard disk. We used to be doing this way, but the unplug path forgets it. This is suitable for stable tree since v3.6. Cc: stable@vger.kernel.org Reported-and-tested-by: Markus <M4rkusXXL@web.de> Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-28 18:26:38 +08:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
MD: ignore discard request for hard disks of hybid raid1/raid10 array In SSD/hard disk hybid storage, discard request should be ignored for hard disk. We used to be doing this way, but the unplug path forgets it. This is suitable for stable tree since v3.6. Cc: stable@vger.kernel.org Reported-and-tested-by: Markus <M4rkusXXL@web.de> Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-28 18:26:38 +08:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md/raid10: submit IO from originating thread instead of md thread. queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. This is nearly identical to a recent patch which provided similar functionality to RAID1. Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:32:13 +11:00
raid10: refactor common wait code from regular read/write request Both raid10_read_request and raid10_write_request share the same code at the beginning of them, so introduce regular_request_wait to clean up code, and call it in both request functions. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-12-07 18:24:21 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
raid10: refactor common wait code from regular read/write request Both raid10_read_request and raid10_write_request share the same code at the beginning of them, so introduce regular_request_wait to clean up code, and call it in both request functions. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-12-07 18:24:21 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
raid10: refactor common wait code from regular read/write request Both raid10_read_request and raid10_write_request share the same code at the beginning of them, so introduce regular_request_wait to clean up code, and call it in both request functions. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-12-07 18:24:21 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
raid10: refactor common wait code from regular read/write request Both raid10_read_request and raid10_write_request share the same code at the beginning of them, so introduce regular_request_wait to clean up code, and call it in both request functions. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-12-07 18:24:21 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
raid10: refactor common wait code from regular read/write request Both raid10_read_request and raid10_write_request share the same code at the beginning of them, so introduce regular_request_wait to clean up code, and call it in both request functions. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-12-07 18:24:21 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
raid10: refactor common wait code from regular read/write request Both raid10_read_request and raid10_write_request share the same code at the beginning of them, so introduce regular_request_wait to clean up code, and call it in both request functions. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-12-07 18:24:21 +08:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Use the new blk_opf_t type Improve static type checking by using the new blk_opf_t type for variables that represent a request flags. Acked-by: Song Liu <song@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-36-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 11:07:01 -07:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: simplify handle_read_error() handle_read_error() duplicates a lot of the work that raid10_read_request() does, so it makes sense to just use that function. handle_read_error() relies on the same r10bio being re-used so that, in the case of a read-only array, setting IO_BLOCKED in r1bio->devs[].bio ensures read_balance() won't re-use that device. So when called from raid10_make_request() we clear that array, but not when called from handle_read_error(). Two parts of handle_read_error() that need to be preserved are the warning message it prints, so they are conditionally added to raid10_read_request(). If the failing rdev can be found, messages are printed. Otherwise they aren't. Not that as rdev_dec_pending() has already been called on the failing rdev, we need to use rcu_read_lock() to get a new reference from the conf. We only use this to get the name of the failing block device. With this change, we no longer need inc_pending(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: initialize r10_bio->read_slot before use. In __make_request() a new r10bio is allocated and passed to raid10_read_request(). The read_slot member of the bio is not initialized, and the raid10_read_request() uses it to index an array. This leads to occasional panics. Fix by initializing the field to invalid value and checking for valid value in raid10_read_request(). Cc: stable@vger.kernel.org Signed-off-by: Kevin Vigor <kvigor@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-11-06 14:20:34 -08:00
md/raid10: simplify handle_read_error() handle_read_error() duplicates a lot of the work that raid10_read_request() does, so it makes sense to just use that function. handle_read_error() relies on the same r10bio being re-used so that, in the case of a read-only array, setting IO_BLOCKED in r1bio->devs[].bio ensures read_balance() won't re-use that device. So when called from raid10_make_request() we clear that array, but not when called from handle_read_error(). Two parts of handle_read_error() that need to be preserved are the warning message it prints, so they are conditionally added to raid10_read_request(). If the failing rdev can be found, messages are printed. Otherwise they aren't. Not that as rdev_dec_pending() has already been called on the failing rdev, we need to use rcu_read_lock() to get a new reference from the conf. We only use this to get the name of the failing block device. With this change, we no longer need inc_pending(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
block: remove bdevname Replace the remaining calls of bdevname with snprintf using the %pg format specifier. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 07:53:17 +02:00
md/raid10: simplify handle_read_error() handle_read_error() duplicates a lot of the work that raid10_read_request() does, so it makes sense to just use that function. handle_read_error() relies on the same r10bio being re-used so that, in the case of a read-only array, setting IO_BLOCKED in r1bio->devs[].bio ensures read_balance() won't re-use that device. So when called from raid10_make_request() we clear that array, but not when called from handle_read_error(). Two parts of handle_read_error() that need to be preserved are the warning message it prints, so they are conditionally added to raid10_read_request(). If the failing rdev can be found, messages are printed. Otherwise they aren't. Not that as rdev_dec_pending() has already been called on the failing rdev, we need to use rcu_read_lock() to get a new reference from the conf. We only use this to get the name of the failing block device. With this change, we no longer need inc_pending(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: simplify handle_read_error() handle_read_error() duplicates a lot of the work that raid10_read_request() does, so it makes sense to just use that function. handle_read_error() relies on the same r10bio being re-used so that, in the case of a read-only array, setting IO_BLOCKED in r1bio->devs[].bio ensures read_balance() won't re-use that device. So when called from raid10_make_request() we clear that array, but not when called from handle_read_error(). Two parts of handle_read_error() that need to be preserved are the warning message it prints, so they are conditionally added to raid10_read_request(). If the failing rdev can be found, messages are printed. Otherwise they aren't. Not that as rdev_dec_pending() has already been called on the failing rdev, we need to use rcu_read_lock() to get a new reference from the conf. We only use this to get the name of the failing block device. With this change, we no longer need inc_pending(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: simplify handle_read_error() handle_read_error() duplicates a lot of the work that raid10_read_request() does, so it makes sense to just use that function. handle_read_error() relies on the same r10bio being re-used so that, in the case of a read-only array, setting IO_BLOCKED in r1bio->devs[].bio ensures read_balance() won't re-use that device. So when called from raid10_make_request() we clear that array, but not when called from handle_read_error(). Two parts of handle_read_error() that need to be preserved are the warning message it prints, so they are conditionally added to raid10_read_request(). If the failing rdev can be found, messages are printed. Otherwise they aren't. Not that as rdev_dec_pending() has already been called on the failing rdev, we need to use rcu_read_lock() to get a new reference from the conf. We only use this to get the name of the failing block device. With this change, we no longer need inc_pending(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: simplify handle_read_error() handle_read_error() duplicates a lot of the work that raid10_read_request() does, so it makes sense to just use that function. handle_read_error() relies on the same r10bio being re-used so that, in the case of a read-only array, setting IO_BLOCKED in r1bio->devs[].bio ensures read_balance() won't re-use that device. So when called from raid10_make_request() we clear that array, but not when called from handle_read_error(). Two parts of handle_read_error() that need to be preserved are the warning message it prints, so they are conditionally added to raid10_read_request(). If the failing rdev can be found, messages are printed. Otherwise they aren't. Not that as rdev_dec_pending() has already been called on the failing rdev, we need to use rcu_read_lock() to get a new reference from the conf. We only use this to get the name of the failing block device. With this change, we no longer need inc_pending(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: simplify handle_read_error() handle_read_error() duplicates a lot of the work that raid10_read_request() does, so it makes sense to just use that function. handle_read_error() relies on the same r10bio being re-used so that, in the case of a read-only array, setting IO_BLOCKED in r1bio->devs[].bio ensures read_balance() won't re-use that device. So when called from raid10_make_request() we clear that array, but not when called from handle_read_error(). Two parts of handle_read_error() that need to be preserved are the warning message it prints, so they are conditionally added to raid10_read_request(). If the failing rdev can be found, messages are printed. Otherwise they aren't. Not that as rdev_dec_pending() has already been called on the failing rdev, we need to use rcu_read_lock() to get a new reference from the conf. We only use this to get the name of the failing block device. With this change, we no longer need inc_pending(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md: fix raid10 hang issue caused by barrier When both regular IO and resync IO happen at the same time, and if we also need to split regular. Then we can see tasks hang due to barrier. 1. resync thread [ 1463.757205] INFO: task md1_resync:5215 blocked for more than 480 seconds. [ 1463.757207] Not tainted 4.19.5-1-default #1 [ 1463.757209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1463.757212] md1_resync D 0 5215 2 0x80000000 [ 1463.757216] Call Trace: [ 1463.757223] ? __schedule+0x29a/0x880 [ 1463.757231] ? raise_barrier+0x8d/0x140 [raid10] [ 1463.757236] schedule+0x78/0x110 [ 1463.757243] raise_barrier+0x8d/0x140 [raid10] [ 1463.757248] ? wait_woken+0x80/0x80 [ 1463.757257] raid10_sync_request+0x1f6/0x1e30 [raid10] [ 1463.757265] ? _raw_spin_unlock_irq+0x22/0x40 [ 1463.757284] ? is_mddev_idle+0x125/0x137 [md_mod] [ 1463.757302] md_do_sync.cold.78+0x404/0x969 [md_mod] [ 1463.757311] ? wait_woken+0x80/0x80 [ 1463.757336] ? md_rdev_init+0xb0/0xb0 [md_mod] [ 1463.757351] md_thread+0xe9/0x140 [md_mod] [ 1463.757358] ? _raw_spin_unlock_irqrestore+0x2e/0x60 [ 1463.757364] ? __kthread_parkme+0x4c/0x70 [ 1463.757369] kthread+0x112/0x130 [ 1463.757374] ? kthread_create_worker_on_cpu+0x40/0x40 [ 1463.757380] ret_from_fork+0x3a/0x50 2. regular IO [ 1463.760679] INFO: task kworker/0:8:5367 blocked for more than 480 seconds. [ 1463.760683] Not tainted 4.19.5-1-default #1 [ 1463.760684] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1463.760687] kworker/0:8 D 0 5367 2 0x80000000 [ 1463.760718] Workqueue: md submit_flushes [md_mod] [ 1463.760721] Call Trace: [ 1463.760731] ? __schedule+0x29a/0x880 [ 1463.760741] ? wait_barrier+0xdd/0x170 [raid10] [ 1463.760746] schedule+0x78/0x110 [ 1463.760753] wait_barrier+0xdd/0x170 [raid10] [ 1463.760761] ? wait_woken+0x80/0x80 [ 1463.760768] raid10_write_request+0xf2/0x900 [raid10] [ 1463.760774] ? wait_woken+0x80/0x80 [ 1463.760778] ? mempool_alloc+0x55/0x160 [ 1463.760795] ? md_write_start+0xa9/0x270 [md_mod] [ 1463.760801] ? try_to_wake_up+0x44/0x470 [ 1463.760810] raid10_make_request+0xc1/0x120 [raid10] [ 1463.760816] ? wait_woken+0x80/0x80 [ 1463.760831] md_handle_request+0x121/0x190 [md_mod] [ 1463.760851] md_make_request+0x78/0x190 [md_mod] [ 1463.760860] generic_make_request+0x1c6/0x470 [ 1463.760870] raid10_write_request+0x77a/0x900 [raid10] [ 1463.760875] ? wait_woken+0x80/0x80 [ 1463.760879] ? mempool_alloc+0x55/0x160 [ 1463.760895] ? md_write_start+0xa9/0x270 [md_mod] [ 1463.760904] raid10_make_request+0xc1/0x120 [raid10] [ 1463.760910] ? wait_woken+0x80/0x80 [ 1463.760926] md_handle_request+0x121/0x190 [md_mod] [ 1463.760931] ? _raw_spin_unlock_irq+0x22/0x40 [ 1463.760936] ? finish_task_switch+0x74/0x260 [ 1463.760954] submit_flushes+0x21/0x40 [md_mod] So resync io is waiting for regular write io to complete to decrease nr_pending (conf->barrier++ is called before waiting). The regular write io splits another bio after call wait_barrier which call nr_pending++, then the splitted bio would continue with raid10_write_request -> wait_barrier, so the splitted bio has to wait for barrier to be zero, then deadlock happens as follows. resync io regular io raise_barrier wait_barrier generic_make_request wait_barrier To resolve the issue, we need to call allow_barrier to decrease nr_pending before generic_make_request since regular IO is not issued to underlying devices, and wait_barrier is called again to ensure no internal IO happening. Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.") Reported-and-tested-by: Siniša Bandin <sinisa@4net.rs> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-12-19 14:19:25 +08:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: enable io accounting For raid10, we record the start time between split bio and clone bio, and finish the accounting in the final endio. Also introduce start_time in r10bio accordingly. Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Signed-off-by: Song Liu <song@kernel.org>
2021-05-25 17:46:22 +08:00
block: pass a block_device to bio_clone_fast Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 17:01:09 +01:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
block: remove the request_queue argument to the block_bio_remap tracepoint The request_queue can trivially be derived from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-03 17:21:38 +01:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: Use the new blk_opf_t type Improve static type checking by using the new blk_opf_t type for variables that represent a request flags. Acked-by: Song Liu <song@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-36-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 11:07:01 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid10: submit IO from originating thread instead of md thread. queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. This is nearly identical to a recent patch which provided similar functionality to RAID1. Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:32:13 +11:00
md: raid1/raid10: drop pending_cnt Those counters are not necessary after commit 11bb45e8aaf6 ("md: drop queue limitation for RAID1 and RAID10"). Remove them from all code (conf and plug structs). raid1_plug_cb and raid10_plug_cb are identical, so move definition of raid1_plug_cb to common raid1-10 definitions and use it for RAID10 too. Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org>
2022-01-17 12:38:47 +01:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
block: pass a block_device to bio_clone_fast Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 17:01:09 +01:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
block: remove the request_queue argument to the block_bio_remap tracepoint The request_queue can trivially be derived from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-03 17:21:38 +01:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
block: store a block_device pointer in struct bio Replace the gendisk pointer in struct bio with a pointer to the newly improved struct block device. From that the gendisk can be trivially accessed with an extra indirection, but it also allows to directly look up all information related to partition remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24 11:02:34 +01:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md: raid1/raid10: drop pending_cnt Those counters are not necessary after commit 11bb45e8aaf6 ("md: drop queue limitation for RAID1 and RAID10"). Remove them from all code (conf and plug structs). raid1_plug_cb and raid10_plug_cb are identical, so move definition of raid1_plug_cb to common raid1-10 definitions and use it for RAID10 too. Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org>
2022-01-17 12:38:47 +01:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md/raid1/10: avoid unnecessary locking If we add bios to block plugging list, locking is unnecessry, since the block unplug is guaranteed not to run at that time. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-10 08:47:11 -07:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md/raid1/10: avoid unnecessary locking If we add bios to block plugging list, locking is unnecessry, since the block unplug is guaranteed not to run at that time. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-10 08:47:11 -07:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md/raid1/10: avoid unnecessary locking If we add bios to block plugging list, locking is unnecessry, since the block unplug is guaranteed not to run at that time. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-10 08:47:11 -07:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md/raid10: pull the code that wait for blocked dev into one function The following patch will reuse these logics, so pull the same codes into one function. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:45 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: pull the code that wait for blocked dev into one function The following patch will reuse these logics, so pull the same codes into one function. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:45 +08:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md-cluster: Suspend writes in RAID10 if within range If there is a resync going on, all nodes must suspend writes to the range. This is recorded in suspend_info and suspend_list. If there is an I/O within the ranges of any of the suspend_info, area_resyncing will return 1. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:51 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md-cluster: Suspend writes in RAID10 if within range If there is a resync going on, all nodes must suspend writes to the range. This is recorded in suspend_info and suspend_list. If there is an I/O within the ranges of any of the suspend_info, area_resyncing will return 1. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:51 +08:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid1, raid10: add blktrace records when IO is delayed Both raid1 and raid10 will sometimes delay handling an IO request, such as when resync is happening or there are too many requests queued. Add some blktrace messsages so we can see when that is happening when looking for performance artefacts. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-14 16:30:21 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: support blocking writes to an array on device failure Allows a userspace metadata handler to take action upon detecting a device failure. Based on an original patch by Neil Brown. Changes: -added blocked_wait waitqueue to rdev -don't qualify Blocked with Faulty always let userspace block writes -added md_wait_for_blocked_rdev to wait for the block device to be clear, if userspace misses the notification another one is sent every 5 seconds -set MD_RECOVERY_NEEDED after clearing "blocked" -kill DoBlock flag, just test mddev->external Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 00:52:32 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: stop using bi_phys_segments raid10 currently repurposes bi_phys_segments on each incoming bio to count how many r10bio was used to encode the request. We need to know when the number of attached r10bio reaches zero to: 1/ call bio_endio() when all IO on the bio is finished 2/ decrement ->nr_pending so that resync IO can proceed. Now that the bio has its own __bi_remaining counter, that can be used instead. We can call bio_inc_remaining to increment the counter and call bio_endio() every time an r10bio completes, rather than only when bi_phys_segments reaches zero. This addresses point 1, but not point 2. bio_endio() doesn't (and cannot) report when the last r10bio has finished, so a different approach is needed. So: instead of counting bios in ->nr_pending, count r10bios. i.e. every time we attach a bio, increment nr_pending. Every time an r10bio completes, decrement nr_pending. Normally we only increment nr_pending after first checking that ->barrier is zero, or some other non-trivial tests and possible waiting. When attaching multiple r10bios to a bio, we only need the tests and the waiting once. After the first increment, subsequent increments can happen unconditionally as they are really all part of the one request. So introduce inc_pending() which can be used when we know that nr_pending is already elevated. Note that this fixes a bug. freeze_array() contains the line atomic_read(&conf->nr_pending) == conf->nr_queued+extra, which implies that the units for ->nr_pending, ->nr_queued and extra are the same. ->nr_queue and extra count r10_bios, but prior to this patch, ->nr_pending counted bios. If a bio ever resulted in multiple r10_bios (due to bad blocks), freeze_array() would not work correctly. Now it does. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-15 14:05:13 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: fix up raid1/raid10 unplugging. We just need to make sure that an unplug event wakes up the md thread, which is exactly what mddev_check_plugged does. Also remove some plug-related code that is no longer needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:43 +10:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: pull the code that wait for blocked dev into one function The following patch will reuse these logics, so pull the same codes into one function. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:45 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
block: kill merge_bvec_fn() completely As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely. Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@kernel.org> Cc: ceph-devel@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: also remove ->merge_bvec_fn() in dm-thin as well as dm-era-target, and resolve merge conflicts] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-27 23:48:34 -07:00
md/raid10: close race that lose writes lost when replacement completes. When a replacement operation completes there is a small window when the original device is marked 'faulty' and the replacement still looks like a replacement. The faulty should be removed and the replacement moved in place very quickly, bit it isn't instant. So the code write out to the array must handle the possibility that the only working device for some slot in the replacement - but it doesn't. If the primary device is faulty it just gives up. This can lead to corruption. So make the code more robust: if either the primary or the replacement is present and working, write to them. Only when neither are present do we give up. This bug has been present since replacement was introduced in 3.3, so it is suitable for any -stable kernel since then. Reported-by: "George Spelvin" <linux@horizon.com> Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 14:42:49 +11:00
block: kill merge_bvec_fn() completely As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely. Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@kernel.org> Cc: ceph-devel@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: also remove ->merge_bvec_fn() in dm-thin as well as dm-era-target, and resolve merge conflicts] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-27 23:48:34 -07:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: close race that lose writes lost when replacement completes. When a replacement operation completes there is a small window when the original device is marked 'faulty' and the replacement still looks like a replacement. The faulty should be removed and the replacement moved in place very quickly, bit it isn't instant. So the code write out to the array must handle the possibility that the only working device for some slot in the replacement - but it doesn't. If the primary device is faulty it just gives up. This can lead to corruption. So make the code more robust: if either the primary or the replacement is present and working, write to them. Only when neither are present do we give up. This bug has been present since replacement was introduced in 3.3, so it is suitable for any -stable kernel since then. Reported-by: "George Spelvin" <linux@horizon.com> Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 14:42:49 +11:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: close race that lose writes lost when replacement completes. When a replacement operation completes there is a small window when the original device is marked 'faulty' and the replacement still looks like a replacement. The faulty should be removed and the replacement moved in place very quickly, bit it isn't instant. So the code write out to the array must handle the possibility that the only working device for some slot in the replacement - but it doesn't. If the primary device is faulty it just gives up. This can lead to corruption. So make the code more robust: if either the primary or the replacement is present and working, write to them. Only when neither are present do we give up. This bug has been present since replacement was introduced in 3.3, so it is suitable for any -stable kernel since then. Reported-by: "George Spelvin" <linux@horizon.com> Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 14:42:49 +11:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid10: close race that lose writes lost when replacement completes. When a replacement operation completes there is a small window when the original device is marked 'faulty' and the replacement still looks like a replacement. The faulty should be removed and the replacement moved in place very quickly, bit it isn't instant. So the code write out to the array must handle the possibility that the only working device for some slot in the replacement - but it doesn't. If the primary device is faulty it just gives up. This can lead to corruption. So make the code more robust: if either the primary or the replacement is present and working, write to them. Only when neither are present do we give up. This bug has been present since replacement was introduced in 3.3, so it is suitable for any -stable kernel since then. Reported-by: "George Spelvin" <linux@horizon.com> Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 14:42:49 +11:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid1, raid10: move rXbio accounting closer to allocation. When raid1 or raid10 find they will need to allocate a new r1bio/r10bio, in order to work around a known bad block, they account for the allocation well before the allocation is made. This separation makes the correctness less obvious and requires comments. The accounting needs to be a little before: before the first rXbio is submitted, but that is all. So move the accounting down to where it makes more sense. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-15 14:05:13 +11:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md: fix raid10 hang issue caused by barrier When both regular IO and resync IO happen at the same time, and if we also need to split regular. Then we can see tasks hang due to barrier. 1. resync thread [ 1463.757205] INFO: task md1_resync:5215 blocked for more than 480 seconds. [ 1463.757207] Not tainted 4.19.5-1-default #1 [ 1463.757209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1463.757212] md1_resync D 0 5215 2 0x80000000 [ 1463.757216] Call Trace: [ 1463.757223] ? __schedule+0x29a/0x880 [ 1463.757231] ? raise_barrier+0x8d/0x140 [raid10] [ 1463.757236] schedule+0x78/0x110 [ 1463.757243] raise_barrier+0x8d/0x140 [raid10] [ 1463.757248] ? wait_woken+0x80/0x80 [ 1463.757257] raid10_sync_request+0x1f6/0x1e30 [raid10] [ 1463.757265] ? _raw_spin_unlock_irq+0x22/0x40 [ 1463.757284] ? is_mddev_idle+0x125/0x137 [md_mod] [ 1463.757302] md_do_sync.cold.78+0x404/0x969 [md_mod] [ 1463.757311] ? wait_woken+0x80/0x80 [ 1463.757336] ? md_rdev_init+0xb0/0xb0 [md_mod] [ 1463.757351] md_thread+0xe9/0x140 [md_mod] [ 1463.757358] ? _raw_spin_unlock_irqrestore+0x2e/0x60 [ 1463.757364] ? __kthread_parkme+0x4c/0x70 [ 1463.757369] kthread+0x112/0x130 [ 1463.757374] ? kthread_create_worker_on_cpu+0x40/0x40 [ 1463.757380] ret_from_fork+0x3a/0x50 2. regular IO [ 1463.760679] INFO: task kworker/0:8:5367 blocked for more than 480 seconds. [ 1463.760683] Not tainted 4.19.5-1-default #1 [ 1463.760684] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1463.760687] kworker/0:8 D 0 5367 2 0x80000000 [ 1463.760718] Workqueue: md submit_flushes [md_mod] [ 1463.760721] Call Trace: [ 1463.760731] ? __schedule+0x29a/0x880 [ 1463.760741] ? wait_barrier+0xdd/0x170 [raid10] [ 1463.760746] schedule+0x78/0x110 [ 1463.760753] wait_barrier+0xdd/0x170 [raid10] [ 1463.760761] ? wait_woken+0x80/0x80 [ 1463.760768] raid10_write_request+0xf2/0x900 [raid10] [ 1463.760774] ? wait_woken+0x80/0x80 [ 1463.760778] ? mempool_alloc+0x55/0x160 [ 1463.760795] ? md_write_start+0xa9/0x270 [md_mod] [ 1463.760801] ? try_to_wake_up+0x44/0x470 [ 1463.760810] raid10_make_request+0xc1/0x120 [raid10] [ 1463.760816] ? wait_woken+0x80/0x80 [ 1463.760831] md_handle_request+0x121/0x190 [md_mod] [ 1463.760851] md_make_request+0x78/0x190 [md_mod] [ 1463.760860] generic_make_request+0x1c6/0x470 [ 1463.760870] raid10_write_request+0x77a/0x900 [raid10] [ 1463.760875] ? wait_woken+0x80/0x80 [ 1463.760879] ? mempool_alloc+0x55/0x160 [ 1463.760895] ? md_write_start+0xa9/0x270 [md_mod] [ 1463.760904] raid10_make_request+0xc1/0x120 [raid10] [ 1463.760910] ? wait_woken+0x80/0x80 [ 1463.760926] md_handle_request+0x121/0x190 [md_mod] [ 1463.760931] ? _raw_spin_unlock_irq+0x22/0x40 [ 1463.760936] ? finish_task_switch+0x74/0x260 [ 1463.760954] submit_flushes+0x21/0x40 [md_mod] So resync io is waiting for regular write io to complete to decrease nr_pending (conf->barrier++ is called before waiting). The regular write io splits another bio after call wait_barrier which call nr_pending++, then the splitted bio would continue with raid10_write_request -> wait_barrier, so the splitted bio has to wait for barrier to be zero, then deadlock happens as follows. resync io regular io raise_barrier wait_barrier generic_make_request wait_barrier To resolve the issue, we need to call allow_barrier to decrease nr_pending before generic_make_request since regular IO is not issued to underlying devices, and wait_barrier is called again to ensure no internal IO happening. Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.") Reported-and-tested-by: Siniša Bandin <sinisa@4net.rs> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-12-19 14:19:25 +08:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: enable io accounting For raid10, we record the start time between split bio and clone bio, and finish the accounting in the final endio. Also introduce start_time in r10bio accordingly. Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Signed-off-by: Song Liu <song@kernel.org>
2021-05-25 17:46:22 +08:00
md: Fix possible deadlock with multiple mempool allocations. It is not safe to allocate from a mempool while holding an item previously allocated from that mempool as that can deadlock when the mempool is close to exhaustion. So don't use a bio list to collect the bios to write to multiple devices in raid1 and raid10. Instead queue each bio as it becomes available so an unplug will activate all previously allocated bios and so a new bio has a chance of being allocated. This means we must set the 'remaining' count to '1' before submitting any requests, then when all are submitted, decrement 'remaining' and possible handle the write completion at that point. Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-19 12:54:01 +11:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
[PATCH] md: improve locking on 'safemode' and move superblock writes When md marks the superblock dirty before a write, it calls generic_make_request (to write the superblock) from within generic_make_request (to write the first dirty block), which could cause problems later. With this patch, the superblock write is always done by the helper thread, and write request are delayed until that write completes. Also, the locking around marking the array dirty and writing the superblock is improved to avoid possible races. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:12 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: refactor some codes from raid10_write_request Previously, we clone both bio and repl_bio in raid10_write_request, then add the cloned bio to plug->pending or conf->pending_bio_list based on plug or not, and most of the logics are same for the two conditions. So introduce raid10_write_one_disk for it, and use replacement parameter to distinguish the difference. No functional changes in the patch. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-20 17:46:04 +08:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: avoid writing to known bad blocks on known bad drives. Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid1,10: Remove use-after-free bug in make_request. A single request to RAID1 or RAID10 might result in multiple requests if there are known bad blocks that need to be avoided. To detect if we need to submit another write request we test: if (sectors_handled < (bio->bi_size >> 9)) { However this is after we call **_write_done() so the 'bio' no longer belongs to us - the writes could have completed and the bio freed. So move the **_write_done call until after the test against bio->bi_size. This addresses https://bugzilla.kernel.org/show_bug.cgi?id=41862 Reported-by: Bruno Wolff III <bruno@wolff.to> Tested-by: Bruno Wolff III <bruno@wolff.to> Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10 17:21:23 +10:00
block: Introduce new bio_split() The new bio_split() can split arbitrary bios - it's not restricted to single page bios, like the old bio_split() (previously renamed to bio_pair_split()). It also has different semantics - it doesn't allocate a struct bio_pair, leaving it up to the caller to handle completions. Then convert the existing bio_pair_split() users to the new bio_split() - and also nvme, which was open coding bio splitting. (We have to take that BUG_ON() out of bio_integrity_trim() because this bio_split() needs to use it, and there's no reason it has to be used on bios marked as cloned; BIO_CLONED doesn't seem to have clearly documented semantics anyways.) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Neil Brown <neilb@suse.de>
2013-11-23 18:21:01 -08:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: initialize r10_bio->read_slot before use. In __make_request() a new r10bio is allocated and passed to raid10_read_request(). The read_slot member of the bio is not initialized, and the raid10_read_request() uses it to index an array. This leads to occasional panics. Fix by initializing the field to invalid value and checking for valid value in raid10_read_request(). Cc: stable@vger.kernel.org Signed-off-by: Kevin Vigor <kvigor@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-11-06 14:20:34 -08:00
md/raid10: extend r10bio devs to raid disks Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit to all member disks and it needs to use r10bio. So extend to r10bio->devs[geo.raid_disks]. Reviewed-by: Coly Li <colyli@suse.de> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:44 +08:00
md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc <robert@leblancnet.us> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-05 13:02:58 -07:00
md/raid10: improve discard request for far layout For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:47 +08:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: improve discard request for far layout For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:47 +08:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: improve discard request for far layout For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:47 +08:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: improve discard request for far layout For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:47 +08:00
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard We are seeing the following warning in raid10_handle_discard. [ 695.110751] ============================= [ 695.131439] WARNING: suspicious RCU usage [ 695.151389] 4.18.0-319.el8.x86_64+debug #1 Not tainted [ 695.174413] ----------------------------- [ 695.192603] drivers/md/raid10.c:1776 suspicious rcu_dereference_check() usage! [ 695.225107] other info that might help us debug this: [ 695.260940] rcu_scheduler_active = 2, debug_locks = 1 [ 695.290157] no locks held by mkfs.xfs/10186. In the first loop of function raid10_handle_discard. It already determines which disk need to handle discard request and add the rdev reference count rdev->nr_pending. So the conf->mirrors will not change until all bios come back from underlayer disks. It doesn't need to use rcu_dereference to get rdev. Cc: stable@vger.kernel.org Fixes: d30588b2731f ('md/raid10: improve raid10 discard request') Signed-off-by: Xiao Ni <xni@redhat.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-08-18 13:57:48 +08:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard We are seeing the following warning in raid10_handle_discard. [ 695.110751] ============================= [ 695.131439] WARNING: suspicious RCU usage [ 695.151389] 4.18.0-319.el8.x86_64+debug #1 Not tainted [ 695.174413] ----------------------------- [ 695.192603] drivers/md/raid10.c:1776 suspicious rcu_dereference_check() usage! [ 695.225107] other info that might help us debug this: [ 695.260940] rcu_scheduler_active = 2, debug_locks = 1 [ 695.290157] no locks held by mkfs.xfs/10186. In the first loop of function raid10_handle_discard. It already determines which disk need to handle discard request and add the rdev reference count rdev->nr_pending. So the conf->mirrors will not change until all bios come back from underlayer disks. It doesn't need to use rcu_dereference to get rdev. Cc: stable@vger.kernel.org Fixes: d30588b2731f ('md/raid10: improve raid10 discard request') Signed-off-by: Xiao Ni <xni@redhat.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-08-18 13:57:48 +08:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard We are seeing the following warning in raid10_handle_discard. [ 695.110751] ============================= [ 695.131439] WARNING: suspicious RCU usage [ 695.151389] 4.18.0-319.el8.x86_64+debug #1 Not tainted [ 695.174413] ----------------------------- [ 695.192603] drivers/md/raid10.c:1776 suspicious rcu_dereference_check() usage! [ 695.225107] other info that might help us debug this: [ 695.260940] rcu_scheduler_active = 2, debug_locks = 1 [ 695.290157] no locks held by mkfs.xfs/10186. In the first loop of function raid10_handle_discard. It already determines which disk need to handle discard request and add the rdev reference count rdev->nr_pending. So the conf->mirrors will not change until all bios come back from underlayer disks. It doesn't need to use rcu_dereference to get rdev. Cc: stable@vger.kernel.org Fixes: d30588b2731f ('md/raid10: improve raid10 discard request') Signed-off-by: Xiao Ni <xni@redhat.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-08-18 13:57:48 +08:00
block: pass a block_device to bio_clone_fast Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 17:01:09 +01:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard We are seeing the following warning in raid10_handle_discard. [ 695.110751] ============================= [ 695.131439] WARNING: suspicious RCU usage [ 695.151389] 4.18.0-319.el8.x86_64+debug #1 Not tainted [ 695.174413] ----------------------------- [ 695.192603] drivers/md/raid10.c:1776 suspicious rcu_dereference_check() usage! [ 695.225107] other info that might help us debug this: [ 695.260940] rcu_scheduler_active = 2, debug_locks = 1 [ 695.290157] no locks held by mkfs.xfs/10186. In the first loop of function raid10_handle_discard. It already determines which disk need to handle discard request and add the rdev reference count rdev->nr_pending. So the conf->mirrors will not change until all bios come back from underlayer disks. It doesn't need to use rcu_dereference to get rdev. Cc: stable@vger.kernel.org Fixes: d30588b2731f ('md/raid10: improve raid10 discard request') Signed-off-by: Xiao Ni <xni@redhat.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-08-18 13:57:48 +08:00
block: pass a block_device to bio_clone_fast Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 17:01:09 +01:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: improve discard request for far layout For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:47 +08:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: improve discard request for far layout For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:47 +08:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: improve discard request for far layout For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:47 +08:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 16:49:39 +10:00
block: Introduce new bio_split() The new bio_split() can split arbitrary bios - it's not restricted to single page bios, like the old bio_split() (previously renamed to bio_pair_split()). It also has different semantics - it doesn't allocate a struct bio_pair, leaving it up to the caller to handle completions. Then convert the existing bio_pair_split() users to the new bio_split() - and also nvme, which was open coding bio splitting. (We have to take that BUG_ON() out of bio_integrity_trim() because this bio_split() needs to use it, and there's no reason it has to be used on bios marked as cloned; BIO_CLONED doesn't seem to have clearly documented semantics anyways.) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Neil Brown <neilb@suse.de>
2013-11-23 18:21:01 -08:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
block: Introduce new bio_split() The new bio_split() can split arbitrary bios - it's not restricted to single page bios, like the old bio_split() (previously renamed to bio_pair_split()). It also has different semantics - it doesn't allocate a struct bio_pair, leaving it up to the caller to handle completions. Then convert the existing bio_pair_split() users to the new bio_split() - and also nvme, which was open coding bio splitting. (We have to take that BUG_ON() out of bio_integrity_trim() because this bio_split() needs to use it, and there's no reason it has to be used on bios marked as cloned; BIO_CLONED doesn't seem to have clearly documented semantics anyways.) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Neil Brown <neilb@suse.de>
2013-11-23 18:21:01 -08:00
md: improve handling of bio with REQ_PREFLUSH in md_flush_request() If pers->make_request fails in md_flush_request(), the bio is lost. To fix this, pass back a bool to indicate if the original make_request call should continue to handle the I/O and instead of assuming the flush logic will push it to completion. Convert md_flush_request to return a bool and no longer calls the raid driver's make_request function. If the return is true, then the md flush logic has or will complete the bio and the md make_request call is done. If false, then the md make_request function needs to keep processing like it is a normal bio. Let the original call to md_handle_request handle any need to retry sending the bio to the raid driver's make_request function should it be needed. Also mark md_flush_request and the make_request function pointer as __must_check to issue warnings should these critical return values be ignored. Fixes: 2bc13b83e629 ("md: batch flush requests.") Cc: stable@vger.kernel.org # # v4.19+ Cc: NeilBrown <neilb@suse.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-16 13:15:14 -04:00
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 16:49:39 +10:00
block: Introduce new bio_split() The new bio_split() can split arbitrary bios - it's not restricted to single page bios, like the old bio_split() (previously renamed to bio_pair_split()). It also has different semantics - it doesn't allocate a struct bio_pair, leaving it up to the caller to handle completions. Then convert the existing bio_pair_split() users to the new bio_split() - and also nvme, which was open coding bio splitting. (We have to take that BUG_ON() out of bio_integrity_trim() because this bio_split() needs to use it, and there's no reason it has to be used on bios marked as cloned; BIO_CLONED doesn't seem to have clearly documented semantics anyways.) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Neil Brown <neilb@suse.de>
2013-11-23 18:21:01 -08:00
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 16:49:39 +10:00
md/raid10: improve raid10 discard request Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-02-04 15:50:46 +08:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid1,10: Remove use-after-free bug in make_request. A single request to RAID1 or RAID10 might result in multiple requests if there are known bad blocks that need to be avoided. To detect if we need to submit another write request we test: if (sectors_handled < (bio->bi_size >> 9)) { However this is after we call **_write_done() so the 'bio' no longer belongs to us - the writes could have completed and the bio freed. So move the **_write_done call until after the test against bio->bi_size. This addresses https://bugzilla.kernel.org/show_bug.cgi?id=41862 Reported-by: Bruno Wolff III <bruno@wolff.to> Tested-by: Bruno Wolff III <bruno@wolff.to> Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10 17:21:23 +10:00
md/raid10: prevent unnecessary calls to wake_up() in fast path Currently, wake_up() is called unconditionally in fast path such as raid10_make_request(), which will cause lock contention under high concurrency: raid10_make_request wake_up __wake_up_common_lock spin_lock_irqsave Improve performance by only call wake_up() if waitqueue is not empty in allow_barrier() and raid10_make_request(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:26 +08:00
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 16:49:39 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD: rename some functions These short function names are hard to search. Rename them to make vim happy. Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-20 13:52:20 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md: Make mddev->chunk_size sector-based. This patch renames the chunk_size field to chunk_sectors with the implied change of semantics. Since is_power_of_2(chunk_size) = is_power_of_2(chunk_sectors << 9) = is_power_of_2(chunk_sectors) these bits don't need an adjustment for the shift. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:45:01 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: fix the 'new' raid10 layout to work correctly. In Linux 3.9 we introduce a new 'far' layout for RAID10 which was supposed to rotate the replicas differently and so provide better resilience. In particular it could survive more combinations of 2 drive failures. Unfortunately. due to a coding error, this some did what was wanted, sometimes improved less than we hoped, and sometimes - in very unlikely circumstances - put multiple replicas on the same device so the redundancy was harmed. No public user-space tool has created arrays using this layout so it is very unlikely that zero-redundancy arrays actually exist. Probably no arrays using any form of the new layout exist. But we cannot be certain. So use another bit in the 'layout' number and introduce a bug-fixed version of the layout. Also when assembling an array, if it has a zero-redundancy layout, give a warning. Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-22 13:20:15 +11:00
[PATCH] md: support stripe/offset mode in raid10 The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:41 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: add rcu protection in raid10_status. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held raid10_status holds none of these. So add rcu_read_lock() protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: check In_sync flag in 'enough()'. It isn't really enough to check that the rdev is present, we need to also be sure that the device is still In_sync. Doing this requires using rcu_dereference to access the rdev, and holding the rcu_read_lock() to ensure the rdev doesn't disappear while we look at it. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 15:08:03 +10:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: check In_sync flag in 'enough()'. It isn't really enough to check that the rdev is present, we need to also be sure that the device is still In_sync. Doing this requires using rcu_dereference to access the rdev, and holding the rcu_read_lock() to ensure the rdev doesn't disappear while we look at it. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 15:08:03 +10:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: fix "enough" function for detecting if array is failed. The 'enough' function is written to work with 'near' arrays only in that is implicitly assumes that the offset from one 'group' of devices to the next is the same as the number of copies. In reality it is the number of 'near' copies. So change it to make this number explicit. This bug makes it possible to run arrays without enough drives present, which is dangerous. It is appropriate for an -stable kernel, but will almost certainly need to be modified for some of them. Cc: stable@vger.kernel.org Reported-by: Jakub Husák <jakub@gooseman.cz> Signed-off-by: NeilBrown <neilb@suse.de>
2012-09-27 12:35:21 +10:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: check In_sync flag in 'enough()'. It isn't really enough to check that the rdev is present, we need to also be sure that the device is still In_sync. Doing this requires using rcu_dereference to access the rdev, and holding the rcu_read_lock() to ensure the rdev doesn't disappear while we look at it. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 15:08:03 +10:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: check In_sync flag in 'enough()'. It isn't really enough to check that the rdev is present, we need to also be sure that the device is still In_sync. Doing this requires using rcu_dereference to access the rdev, and holding the rcu_read_lock() to ensure the rdev doesn't disappear while we look at it. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 15:08:03 +10:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: check In_sync flag in 'enough()'. It isn't really enough to check that the rdev is present, we need to also be sure that the device is still In_sync. Doing this requires using rcu_dereference to access the rdev, and holding the rcu_read_lock() to ensure the rdev doesn't disappear while we look at it. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 15:08:03 +10:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md: Set MD_BROKEN for RAID1 and RAID10 There is no direct mechanism to determine raid failure outside personality. It is done by checking rdev->flags after executing md_error(). If "faulty" flag is not set then -EBUSY is returned to userspace. -EBUSY means that array will be failed after drive removal. Mdadm has special routine to handle the array failure and it is executed if -EBUSY is returned by md. There are at least two known reasons to not consider this mechanism as correct: 1. drive can be removed even if array will be failed[1]. 2. -EBUSY seems to be wrong status. Array is not busy, but removal process cannot proceed safe. -EBUSY expectation cannot be removed without breaking compatibility with userspace. In this patch first issue is resolved by adding support for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in next commit. The idea is to set the MD_BROKEN if we are sure that raid is in failed state now. This is done in each error_handler(). In md_error() MD_BROKEN flag is checked. If is set, then -EBUSY is returned to userspace. As in previous commit, it causes that #mdadm --set-faulty is able to fail array. Previously proposed workaround is valid if optional functionality[1] is disabled. [1] commit 9a567843f7ce("md: allow last device to be forcibly removed from RAID1/RAID10.") Reviewd-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org>
2022-03-22 16:23:38 +01:00
md/raid10: fix compile warning With W=1, compiler complains. drivers/md/raid10.c:1983: warning: bad line: Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-08-22 15:45:39 +08:00
md: Set MD_BROKEN for RAID1 and RAID10 There is no direct mechanism to determine raid failure outside personality. It is done by checking rdev->flags after executing md_error(). If "faulty" flag is not set then -EBUSY is returned to userspace. -EBUSY means that array will be failed after drive removal. Mdadm has special routine to handle the array failure and it is executed if -EBUSY is returned by md. There are at least two known reasons to not consider this mechanism as correct: 1. drive can be removed even if array will be failed[1]. 2. -EBUSY seems to be wrong status. Array is not busy, but removal process cannot proceed safe. -EBUSY expectation cannot be removed without breaking compatibility with userspace. In this patch first issue is resolved by adding support for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in next commit. The idea is to set the MD_BROKEN if we are sure that raid is in failed state now. This is done in each error_handler(). In md_error() MD_BROKEN flag is checked. If is set, then -EBUSY is returned to userspace. As in previous commit, it causes that #mdadm --set-faulty is able to fail array. Previously proposed workaround is valid if optional functionality[1] is disabled. [1] commit 9a567843f7ce("md: allow last device to be forcibly removed from RAID1/RAID10.") Reviewd-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org>
2022-03-22 16:23:38 +01:00
MD: rename some functions These short function names are hard to search. Rename them to make vim happy. Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-20 13:52:20 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md: Set MD_BROKEN for RAID1 and RAID10 There is no direct mechanism to determine raid failure outside personality. It is done by checking rdev->flags after executing md_error(). If "faulty" flag is not set then -EBUSY is returned to userspace. -EBUSY means that array will be failed after drive removal. Mdadm has special routine to handle the array failure and it is executed if -EBUSY is returned by md. There are at least two known reasons to not consider this mechanism as correct: 1. drive can be removed even if array will be failed[1]. 2. -EBUSY seems to be wrong status. Array is not busy, but removal process cannot proceed safe. -EBUSY expectation cannot be removed without breaking compatibility with userspace. In this patch first issue is resolved by adding support for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in next commit. The idea is to set the MD_BROKEN if we are sure that raid is in failed state now. This is done in each error_handler(). In md_error() MD_BROKEN flag is checked. If is set, then -EBUSY is returned to userspace. As in previous commit, it causes that #mdadm --set-faulty is able to fail array. Previously proposed workaround is valid if optional functionality[1] is disabled. [1] commit 9a567843f7ce("md: allow last device to be forcibly removed from RAID1/RAID10.") Reviewd-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org>
2022-03-22 16:23:38 +01:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md/raid1,raid10: always abort recover on write error. Currently we don't abort recovery on a write error if the write error to the recovering device was triggerd by normal IO (as opposed to recovery IO). This means that for one bitmap region, the recovery might write to the recovering device for a few sectors, then not bother for subsequent sectors (as it never writes to failed devices). In this case the bitmap bit will be cleared, but it really shouldn't. The result is that if the recovering device fails and is then re-added (after fixing whatever hardware problem triggerred the failure), the second recovery won't redo the region it was in the middle of, so some of the device will not be recovered properly. If we abort the recovery, the region being processes will be cancelled (bit not cleared) and the whole region will be retried. As the bug can result in data corruption the patch is suitable for -stable. For kernels prior to 3.11 there is a conflict in raid10.c which will require care. Original-from: jiao hui <jiaohui@bwstor.com.cn> Reported-and-tested-by: jiao hui <jiaohui@bwstor.com.cn> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@vger.kernel.org
2014-07-31 10:16:29 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Set MD_BROKEN for RAID1 and RAID10 There is no direct mechanism to determine raid failure outside personality. It is done by checking rdev->flags after executing md_error(). If "faulty" flag is not set then -EBUSY is returned to userspace. -EBUSY means that array will be failed after drive removal. Mdadm has special routine to handle the array failure and it is executed if -EBUSY is returned by md. There are at least two known reasons to not consider this mechanism as correct: 1. drive can be removed even if array will be failed[1]. 2. -EBUSY seems to be wrong status. Array is not busy, but removal process cannot proceed safe. -EBUSY expectation cannot be removed without breaking compatibility with userspace. In this patch first issue is resolved by adding support for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in next commit. The idea is to set the MD_BROKEN if we are sure that raid is in failed state now. This is done in each error_handler(). In md_error() MD_BROKEN flag is checked. If is set, then -EBUSY is returned to userspace. As in previous commit, it causes that #mdadm --set-faulty is able to fail array. Previously proposed workaround is valid if optional functionality[1] is disabled. [1] commit 9a567843f7ce("md: allow last device to be forcibly removed from RAID1/RAID10.") Reviewd-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org>
2022-03-22 16:23:38 +01:00
md/raid1,raid10: always abort recover on write error. Currently we don't abort recovery on a write error if the write error to the recovering device was triggerd by normal IO (as opposed to recovery IO). This means that for one bitmap region, the recovery might write to the recovering device for a few sectors, then not bother for subsequent sectors (as it never writes to failed devices). In this case the bitmap bit will be cleared, but it really shouldn't. The result is that if the recovering device fails and is then re-added (after fixing whatever hardware problem triggerred the failure), the second recovery won't redo the region it was in the middle of, so some of the device will not be recovered properly. If we abort the recovery, the region being processes will be cancelled (bit not cleared) and the whole region will be retried. As the bug can result in data corruption the patch is suitable for -stable. For kernels prior to 3.11 there is a conflict in raid10.c which will require care. Original-from: jiao hui <jiaohui@bwstor.com.cn> Reported-and-tested-by: jiao hui <jiaohui@bwstor.com.cn> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@vger.kernel.org
2014-07-31 10:16:29 +10:00
md: make it easier to wait for bad blocks to be acknowledged. It is only safe to choose not to write to a bad block if that bad block is safely recorded in metadata - i.e. if it has been 'acknowledged'. If it hasn't we need to wait for the acknowledgement. We support that using rdev->blocked wait and md_wait_for_blocked_rdev by introducing a new device flag 'BlockedBadBlock'. This flag is only advisory. It is cleared whenever we acknowledge a bad block, so that a waiter can re-check the particular bad blocks that it is interested it. It should be set by a caller when they find they need to wait. This (set after test) is inherently racy, but as md_wait_for_blocked_rdev already has a timeout, losing the race will have minimal impact. When we clear "Blocked" was also clear "BlockedBadBlocks" incase it was set incorrectly (see above race). We also modify the way we manage 'Blocked' to fit better with the new handling of 'BlockedBadBlocks' and to make it consistent between externally managed and internally managed metadata. This requires that each raidXd loop checks if the metadata needs to be written and triggers a write (md_check_recovery) if needed. Otherwise a queued write request might cause raidXd to wait for the metadata to write, and only that thread can write it. Before writing metadata, we set FaultRecorded for all devices that are Faulty, then after writing the metadata we clear Blocked for any device for which the Fault was certainly Recorded. The 'faulty' device flag now appears in sysfs if the device is faulty *or* it has unacknowledged bad blocks. So user-space which does not understand bad blocks can continue to function correctly. User space which does, should not assume a device is faulty until it sees the 'faulty' flag, and then sees the list of unacknowledged bad blocks is empty. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:31:48 +10:00
[PATCH] md: convert 'faulty' and 'in_sync' fields to bits in 'flags' field This has the advantage of removing the confusion caused by 'rdev_t' and 'mddev_t' both having 'in_sync' fields. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:31 -08:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: simplify print_conf a little. 'tmp' is only ever used to extract 'tmp->rdev', so just use 'rdev' directly. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: simplify print_conf a little. 'tmp' is only ever used to extract 'tmp->rdev', so just use 'rdev' directly. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: simplify print_conf a little. 'tmp' is only ever used to extract 'tmp->rdev', so just use 'rdev' directly. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
[PATCH] md: improve raid10 "IO Barrier" concept raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:13 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
MD RAID10: rename mirror_info structure MD RAID10: Rename the structure 'mirror_info' to 'raid10_info' The same structure name ('mirror_info') is used by raid1. Each of these structures are defined in there respective header files. If dm-raid is to support both RAID1 and RAID10, the header files will be included and the structure names must not collide. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
md: provide appropriate return value for spare_active functions. md_check_recovery expects ->spare_active to return 'true' if any spares were activated, but none of them do, so the consequent change in 'degraded' is not notified through sysfs. So count the number of spares activated, subtract it from 'degraded' just once, and return it. Reported-by: Adrian Drzewiecki <adriand@vmware.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-18 11:56:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: Fix skipping recovery for read-only arrays. Since: commit 7ceb17e87bde79d285a8b988cfed9eaeebe60b86 md: Allow devices to be re-added to a read-only array. spares are activated on a read-only array. In case of raid1 and raid10 personalities it causes that not-in-sync devices are marked in-sync without checking if recovery has been finished. If a read-only array is degraded and one of its devices is not in-sync (because the array has been only partially recovered) recovery will be skipped. This patch adds checking if recovery has been finished before marking a device in-sync for raid1 and raid10 personalities. In case of raid5 personality such condition is already present (at raid5.c:6029). Bug was introduced in 3.10 and causes data corruption. Cc: stable@vger.kernel.org Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-10-24 12:55:17 +11:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: provide appropriate return value for spare_active functions. md_check_recovery expects ->spare_active to return 'true' if any spares were activated, but none of them do, so the consequent change in 'degraded' is not notified through sysfs. So count the number of spares activated, subtract it from 'degraded' just once, and return it. Reported-by: Adrian Drzewiecki <adriand@vmware.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-18 11:56:59 +10:00
MD RAID10: Prep for DM RAID10 device replacement capability MD RAID10: Fix a couple potential kernel panics if RAID10 is used by dm-raid When device-mapper uses the RAID10 personality through dm-raid.c, there is no 'gendisk' structure in mddev and some sysfs information is also not populated. This patch avoids touching those non-existent structures. Signed-off-by: Jonathan Brassow <jbrassow@rehdat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:38:58 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: provide appropriate return value for spare_active functions. md_check_recovery expects ->spare_active to return 'true' if any spares were activated, but none of them do, so the consequent change in 'degraded' is not notified through sysfs. So count the number of spares activated, subtract it from 'degraded' just once, and return it. Reported-by: Adrian Drzewiecki <adriand@vmware.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-18 11:56:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: provide appropriate return value for spare_active functions. md_check_recovery expects ->spare_active to return 'true' if any spares were activated, but none of them do, so the consequent change in 'degraded' is not notified through sysfs. So count the number of spares activated, subtract it from 'degraded' just once, and return it. Reported-by: Adrian Drzewiecki <adriand@vmware.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-18 11:56:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
rationalise return value for ->hot_add_disk method. For all array types but linear, ->hot_add_disk returns 1 on success, 0 on failure. For linear, it returns 0 on success and -errno on failure. This doesn't cause a functional problem because the ->hot_add_disk function of linear is used quite differently to the others. However it is confusing. So convert all to return 0 for success or -errno on failure and fix call sites to match. Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:31:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Support adding a spare to a live md array with external metadata. i.e. extend the 'md/dev-XXX/slot' attribute so that you can tell a device to fill an vacant slot in an and md array. Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:31:31 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
rationalise return value for ->hot_add_disk method. For all array types but linear, ->hot_add_disk returns 1 on success, 0 on failure. For linear, it returns 0 on success and -errno on failure. This doesn't cause a functional problem because the ->hot_add_disk function of linear is used quite differently to the others. However it is confusing. So convert all to return 0 for success or -errno on failure and fix call sites to match. Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:31:33 +10:00
md/raid10: locking changes for 'enough()'. As 'enough' accesses conf->prev and conf->geo, which can change spontanously, it should guard against changes. This can be done with device_lock as start_reshape holds device_lock while updating 'geo' and end_reshape holds it while updating 'prev'. So 'error' needs to hold 'device_lock'. On the other hand, raid10_end_read_request knows which of the two it really wants to access, and as it is an active request on that one, the value cannot change underneath it. So change _enough to take flag rather than a pointer, pass the appropriate flag from raid10_end_read_request(), and remove the locking. All other calls to 'enough' are made with reconfig_mutex held, so neither 'prev' nor 'geo' can change. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-11 14:57:09 +10:00
rationalise return value for ->hot_add_disk method. For all array types but linear, ->hot_add_disk returns 1 on success, 0 on failure. For linear, it returns 0 on success and -errno on failure. This doesn't cause a functional problem because the ->hot_add_disk function of linear is used quite differently to the others. However it is confusing. So convert all to return 0 for success or -errno on failure and fix call sites to match. Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:31:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid: only permit hot-add of compatible integrity profiles It is not safe for an integrity profile to be changed while i/o is in-flight in the queue. Prevent adding new disks or otherwise online spares to an array if the device has an incompatible integrity profile. The original change to the blk_integrity_unregister implementation in md, commmit c7bfced9a671 "md: suspend i/o during runtime blk_integrity_unregister" introduced an immediate hang regression. This policy of disallowing changes the integrity profile once one has been established is shared with DM. Here is an abbreviated log from a test run that: 1/ Creates a degraded raid1 with an integrity-enabled device (pmem0s) [ 59.076127] 2/ Tries to add an integrity-disabled device (pmem1m) [ 90.489209] 3/ Retries with an integrity-enabled device (pmem1s) [ 205.671277] [ 59.076127] md/raid1:md0: active with 1 out of 2 mirrors [ 59.078302] md: data integrity enabled on md0 [..] [ 90.489209] md0: incompatible integrity profile for pmem1m [..] [ 205.671277] md: super_written gets error=-5 [ 205.677386] md/raid1:md0: Disk failure on pmem1m, disabling device. [ 205.677386] md/raid1:md0: Operation continuing on 1 devices. [ 205.683037] RAID1 conf printout: [ 205.684699] --- wd:1 rd:2 [ 205.685972] disk 0, wo:0, o:1, dev:pmem0s [ 205.687562] disk 1, wo:1, o:1, dev:pmem1s [ 205.691717] md: recovery of RAID array md0 Fixes: c7bfced9a671 ("md: suspend i/o during runtime blk_integrity_unregister") Cc: <stable@vger.kernel.org> Cc: Mike Snitzer <snitzer@redhat.com> Reported-by: NeilBrown <neilb@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-13 16:00:07 -08:00
md: fix bug in raid10 recovery. Adding a spare to a raid10 doesn't cause recovery to start. This is due to an silly type in commit 6c2fce2ef6b4821c21b5c42c7207cb9cf8c87eda and so is a bug in 2.6.27 and .28-rc. Thanks to Thomas Backlund for bisecting to find this. Cc: Thomas Backlund <tmb@mandriva.org> Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2008-11-06 17:28:20 +11:00
Support adding a spare to a live md array with external metadata. i.e. extend the 'md/dev-XXX/slot' attribute so that you can tell a device to fill an vacant slot in an and md array. Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:31:31 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: get rid of duplicated conditional expression Variable 'first' is initialized to zero and updated to @rdev->raid_disk only if it is greater than 0. Thus condition '>= first' always implies '>= 0' so the latter is not needed. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:43 +10:00
MD: fix invalid stored role for a disk - try2 Commit d595567dc4f0 (MD: fix invalid stored role for a disk) broke linear hotadd. Let's only fix the role for disks in raid1/10. Based on Guoqing's original patch. Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Gioh Kim <gi-oh.kim@profitbricks.com> Cc: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-14 17:05:07 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
Support adding a spare to a live md array with external metadata. i.e. extend the 'md/dev-XXX/slot' attribute so that you can tell a device to fill an vacant slot in an and md array. Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:31:31 +10:00
md/raid10: Make use of new recovery_disabled handling When we get a read error during recovery, RAID10 previously arranged for the recovering device to appear to fail so that the recovery stops and doesn't restart. This is misleading and wrong. Instead, make use of the new recovery_disabled handling and mark the target device and having recovery disabled. Add appropriate checks in add_disk and remove_disk so that devices are removed and not re-added when recovery is disabled. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
MD RAID10: rename mirror_info structure MD RAID10: Rename the structure 'mirror_info' to 'raid10_info' The same structure name ('mirror_info') is used by raid1. Each of these structures are defined in there respective header files. If dm-raid is to support both RAID1 and RAID10, the header files will be included and the structure names must not collide. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
md/raid10: Make use of new recovery_disabled handling When we get a read error during recovery, RAID10 previously arranged for the recovering device to appear to fail so that the recovery stops and doesn't restart. This is misleading and wrong. Instead, make use of the new recovery_disabled handling and mark the target device and having recovery disabled. Add appropriate checks in add_disk and remove_disk so that devices are removed and not re-added when recovery is disabled. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: If there is a spare and a want_replacement device, start replacement. When attempting to add a spare to a RAID10 array, also consider adding it as a replacement for a want_replacement device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
DM RAID: Add ability to restore transiently failed devices on resume DM RAID: Add ability to restore transiently failed devices on resume This patch adds code to the resume function to check over the devices in the RAID array. If any are found to be marked as failed and their superblocks can be read, an attempt is made to reintegrate them into the array. This allows the user to refresh the array with a simple suspend and resume of the array - rather than having to load a completely new table, allocate and initialize all the structures and throw away the old instantiation. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-05-02 14:19:24 -05:00
md/raid10: If there is a spare and a want_replacement device, start replacement. When attempting to add a spare to a RAID10 array, also consider adding it as a replacement for a want_replacement device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
DM RAID: Add ability to restore transiently failed devices on resume DM RAID: Add ability to restore transiently failed devices on resume This patch adds code to the resume function to check over the devices in the RAID array. If any are found to be marked as failed and their superblocks can be read, an attempt is made to reintegrate them into the array. This allows the user to refresh the array with a simple suspend and resume of the array - rather than having to load a completely new table, allocate and initialize all the structures and throw away the old instantiation. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-05-02 14:19:24 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Make use of new recovery_disabled handling When we get a read error during recovery, RAID10 previously arranged for the recovering device to appear to fail so that the recovery stops and doesn't restart. This is misleading and wrong. Instead, make use of the new recovery_disabled handling and mark the target device and having recovery disabled. Add appropriate checks in add_disk and remove_disk so that devices are removed and not re-added when recovery is disabled. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md: Fix some bugs in recovery_disabled handling. In 3.0 we changed the way recovery_disabled was handle so that instead of testing against zero, we test an mddev-> value against a conf-> value. Two problems: 1/ one place in raid1 was missed and still sets to '1'. 2/ We didn't explicitly set the conf-> value at array creation time. It defaulted to '0' just like the mddev value does so they could appear equal and thus disable recovery. This did not affect normal 'md' as it calls bind_rdev_to_array which changes the mddev value. However the dmraid interface doesn't call this and so doesn't change ->recovery_disabled; so at array start all recovery is incorrectly disabled. So initialise the 'conf' value to one less that the mddev value, so the will only be the same when explicitly set that way. Reported-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-26 11:54:39 +11:00
md/raid10: Make use of new recovery_disabled handling When we get a read error during recovery, RAID10 previously arranged for the recovering device to appear to fail so that the recovery stops and doesn't restart. This is misleading and wrong. Instead, make use of the new recovery_disabled handling and mark the target device and having recovery disabled. Add appropriate checks in add_disk and remove_disk so that devices are removed and not re-added when recovery is disabled. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md: raid 10 supports TRIM This makes md raid 10 support TRIM. If one disk supports discard and another not, or one has discard_zero_data and another not, there could be inconsistent between data from such disks. But this should not matter, discarded data is useless. This will add extra copy in rebuild though. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:30:52 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
rationalise return value for ->hot_add_disk method. For all array types but linear, ->hot_add_disk returns 1 on success, 0 on failure. For linear, it returns 0 on success and -errno on failure. This doesn't cause a functional problem because the ->hot_add_disk function of linear is used quite differently to the others. However it is confusing. So convert all to return 0 for success or -errno on failure and fix call sites to match. Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:31:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: change hot_remove_disk to take an rdev rather than a number. Soon an array will be able to have multiple devices with the same raid_disk number (an original and a replacement). So removing a device based on the number won't work. So pass the actual device handle instead. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: change hot_remove_disk to take an rdev rather than a number. Soon an array will be able to have multiple devices with the same raid_disk number (an original and a replacement). So removing a device based on the number won't work. So pass the actual device handle instead. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
md/raid10: allow removal of failed replacement devices. Enhance raid10_remove_disk to be able to remove ->replacement as well as ->rdev Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md-raid10: fix KASAN warning There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff889108f3d300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff889108f3d380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff889108f3d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-26 04:33:12 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md-raid10: fix KASAN warning There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff889108f3d300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff889108f3d380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff889108f3d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-26 04:33:12 -04:00
md/raid10: allow removal of failed replacement devices. Enhance raid10_remove_disk to be able to remove ->replacement as well as ->rdev Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md: reduce the number of synchronize_rcu() calls when multiple devices fail. Every time a device is removed with ->hot_remove_disk() a synchronize_rcu() call is made which can delay several milliseconds in some case. If lots of devices fail at once - as could happen with a large RAID10 where one set of devices are removed all at once - these delays can add up to be very inconcenient. As failure is not reversible we can check for that first, setting a separate flag if it is found, and then all synchronize_rcu() once for all the flagged devices. Then ->hot_remove_disk() function can skip the synchronize_rcu() step if the flag is set. fix build error(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:53 +10:00
md/raid10: allow removal of failed replacement devices. Enhance raid10_remove_disk to be able to remove ->replacement as well as ->rdev Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Remove extras after reshape to smaller number of devices. When a reshape which reduced the number of devices finishes we must remove the extra devices. So ensure that raid10_remove_disk won't try to keep them, and have raid10_finish_reshape clear the 'in_sync' flag. Then remove_and_add_spares will be able to remove them. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:33 +10:00
md/raid10: allow removal of failed replacement devices. Enhance raid10_remove_disk to be able to remove ->replacement as well as ->rdev Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: allow removal of failed replacement devices. Enhance raid10_remove_disk to be able to remove ->replacement as well as ->rdev Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md: reduce the number of synchronize_rcu() calls when multiple devices fail. Every time a device is removed with ->hot_remove_disk() a synchronize_rcu() call is made which can delay several milliseconds in some case. If lots of devices fail at once - as could happen with a large RAID10 where one set of devices are removed all at once - these delays can add up to be very inconcenient. As failure is not reversible we can check for that first, setting a separate flag if it is found, and then all synchronize_rcu() once for all the flagged devices. Then ->hot_remove_disk() function can skip the synchronize_rcu() step if the flag is set. fix build error(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:53 +10:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: clear WantReplacement once disk is removed We can clear 'WantReplacement' flag directly no matter it's replacement existed or not since the semantic is same as before. Also since the disk is removed from array, then it is straightforward to remove 'WantReplacement' flag and the comments in raid10/5 can be removed as well. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-24 15:58:04 +08:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: clear WantReplacement once disk is removed We can clear 'WantReplacement' flag directly no matter it's replacement existed or not since the semantic is same as before. Also since the disk is removed from array, then it is straightforward to remove 'WantReplacement' flag and the comments in raid10/5 can be removed as well. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-24 15:58:04 +08:00
md/raid10: allow removal of failed replacement devices. Enhance raid10_remove_disk to be able to remove ->replacement as well as ->rdev Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: refactor code of read reshape's .bi_end_io reshape read request is a bit special and requires one extra bio which isn't allocated from r10buf_pool. Refactor the .bi_end_io for read reshape, so that we can use raid10's resync page mangement approach easily in the following patches. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:32 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
[PATCH] md: raid10 read-error handling - resync and read-only Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:29 -08:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
[PATCH] md: raid10 read-error handling - resync and read-only Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:29 -08:00
md/raid10: simplify read error handling during recovery. If a read error is detected during recovery the code currently fails the read device. This isn't really necessary. recovery_request_write will signal a write error to end_sync_write and it will record a write error on the destination device which will record a bad block there or kick it from the array. So just remove this call to do md_error. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
[PATCH] md: count corrected read errors per drive Store this total in superblock (As appropriate), and make it available to userspace via sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:52 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: avoid races when stopping resync. There has been a race in raid10 and raid1 for a long time which has only recently started showing up due to a scheduler changed. When a sync_read request finishes, as soon as reschedule_retry is called, another thread can mark the resync request as having completed, so md_do_sync can finish, ->stop can be called, and ->conf can be freed. So using conf after reschedule_retry is not safe. Similarly, when finishing a sync_write, calling md_done_sync must be the last thing we do, as it allows a chain of events which will free conf and other data structures. The first of these requires action in raid10.c The second requires action in raid1.c and raid10.c Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-25 13:18:47 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: refactor code of read reshape's .bi_end_io reshape read request is a bit special and requires one extra bio which isn't allocated from r10buf_pool. Refactor the .bi_end_io for read reshape, so that we can use raid10's resync page mangement approach easily in the following patches. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:32 +08:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md: raid10: refactor code of read reshape's .bi_end_io reshape read request is a bit special and requires one extra bio which isn't allocated from r10buf_pool. Refactor the .bi_end_io for read reshape, so that we can use raid10's resync page mangement approach easily in the following patches. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:32 +08:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md: raid10: refactor code of read reshape's .bi_end_io reshape read request is a bit special and requires one extra bio which isn't allocated from r10buf_pool. Refactor the .bi_end_io for read reshape, so that we can use raid10's resync page mangement approach easily in the following patches. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:32 +08:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: avoid races when stopping resync. There has been a race in raid10 and raid1 for a long time which has only recently started showing up due to a scheduler changed. When a sync_read request finishes, as soon as reschedule_retry is called, another thread can mark the resync request as having completed, so md_do_sync can finish, ->stop can be called, and ->conf can be freed. So using conf after reschedule_retry is not safe. Similarly, when finishing a sync_write, calling md_done_sync must be the last thing we do, as it allows a chain of events which will free conf and other data structures. The first of these requires action in raid10.c The second requires action in raid1.c and raid10.c Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-25 13:18:47 +11:00
md/raid10: record bad blocks due to write errors during resync/recovery. If we get a write error during resync/recovery don't fail the device but instead record a bad block. If that fails we can then fail the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: avoid races when stopping resync. There has been a race in raid10 and raid1 for a long time which has only recently started showing up due to a scheduler changed. When a sync_read request finishes, as soon as reschedule_retry is called, another thread can mark the resync request as having completed, so md_do_sync can finish, ->stop can be called, and ->conf can be freed. So using conf after reschedule_retry is not safe. Similarly, when finishing a sync_write, calling md_done_sync must be the last thing we do, as it allows a chain of events which will free conf and other data structures. The first of these requires action in raid10.c The second requires action in raid1.c and raid10.c Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-25 13:18:47 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md/raid10: record bad blocks due to write errors during resync/recovery. If we get a write error during resync/recovery don't fail the device but instead record a bad block. If that fails we can then fail the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: remove unnecessary smp_mb() from end_sync_write Recent commit 4ca40c2ce099e4f1ce3 (md/raid10: Allow replacement device ...) added an smp_mb in end_sync_write. This was to close a possible race with raid10_remove_disk. However there is no such race as it is never attempted to remove a disk while resync (or recovery) is happening. so the smp_mb is just noise. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-13 11:21:20 +11:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: If there is a spare and a want_replacement device, start replacement. When attempting to add a spare to a RAID10 array, also consider adding it as a replacement for a want_replacement device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid1,raid10: Fix calculation of 'vcnt' when processing error recovery. If r1bio->sectors % 8 != 0,then the memcmp and a later memcpy will omit the last bio_vec. This is suitable for any stable kernel since 3.1 when bad-block management was introduced. Cc: stable@vger.kernel.org Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-12 16:04:47 +10:00
md: raid10: retrieve page from preallocated resync page array Now one page array is allocated for each resync bio, and we can retrieve page from this table directly. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:34 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: fix data corruption and crash during resync The commit c31df25f20e3 ("md/raid10: make sync_request_write() call bio_copy_data()") replaced manual data copying with bio_copy_data() but it doesn't work as intended. The source bio (fbio) is already processed, so its bvec_iter has bi_size == 0 and bi_idx == bi_vcnt. Because of this, bio_copy_data() either does not copy anything, or worse, copies data from the ->bi_next bio if it is set. This causes wrong data to be written to drives during resync and sometimes lockups/crashes in bio_copy_data(): [ 517.338478] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [md126_raid10:3319] [ 517.347324] Modules linked in: raid10 xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables x86_pkg_temp_thermal coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul cryptd shpchp pcspkr ipmi_si ipmi_msghandler tpm_crb acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sr_mod cdrom sd_mod e1000e ax88179_178a usbnet mii ahci ata_generic crc32c_intel libahci ptp pata_acpi libata pps_core wmi sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 517.440555] CPU: 0 PID: 3319 Comm: md126_raid10 Not tainted 4.3.0-rc6+ #1 [ 517.448384] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0055.D14.1509221924 09/22/2015 [ 517.459768] task: ffff880153773980 ti: ffff880150df8000 task.ti: ffff880150df8000 [ 517.468529] RIP: 0010:[<ffffffff812e1888>] [<ffffffff812e1888>] bio_copy_data+0xc8/0x3c0 [ 517.478164] RSP: 0018:ffff880150dfbc98 EFLAGS: 00000246 [ 517.484341] RAX: ffff880169356688 RBX: 0000000000001000 RCX: 0000000000000000 [ 517.492558] RDX: 0000000000000000 RSI: ffffea0001ac2980 RDI: ffffea0000d835c0 [ 517.500773] RBP: ffff880150dfbd08 R08: 0000000000000001 R09: ffff880153773980 [ 517.508987] R10: ffff880169356600 R11: 0000000000001000 R12: 0000000000010000 [ 517.517199] R13: 000000000000e000 R14: 0000000000000000 R15: 0000000000001000 [ 517.525412] FS: 0000000000000000(0000) GS:ffff880174a00000(0000) knlGS:0000000000000000 [ 517.534844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 517.541507] CR2: 00007f8a044d5fed CR3: 0000000169504000 CR4: 00000000001406f0 [ 517.549722] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 517.557929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 517.566144] Stack: [ 517.568626] ffff880174a16bc0 ffff880153773980 ffff880169356600 0000000000000000 [ 517.577659] 0000000000000001 0000000000000001 ffff880153773980 ffff88016a61a800 [ 517.586715] ffff880150dfbcf8 0000000000000001 ffff88016dd209e0 0000000000001000 [ 517.595773] Call Trace: [ 517.598747] [<ffffffffa043ef95>] raid10d+0xfc5/0x1690 [raid10] [ 517.605610] [<ffffffff816697ae>] ? __schedule+0x29e/0x8e2 [ 517.611987] [<ffffffff814ff206>] md_thread+0x106/0x140 [ 517.618072] [<ffffffff810c1d80>] ? wait_woken+0x80/0x80 [ 517.624252] [<ffffffff814ff100>] ? super_1_load+0x520/0x520 [ 517.630817] [<ffffffff8109ef89>] kthread+0xc9/0xe0 [ 517.636506] [<ffffffff8109eec0>] ? flush_kthread_worker+0x70/0x70 [ 517.643653] [<ffffffff8166d99f>] ret_from_fork+0x3f/0x70 [ 517.649929] [<ffffffff8109eec0>] ? flush_kthread_worker+0x70/0x70 Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by: Shaohua Li <shli@kernel.org> Cc: stable@vger.kernel.org (v4.2+) Fixes: c31df25f20e3 ("md/raid10: make sync_request_write() call bio_copy_data()") Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-18 15:19:16 +11:00
md: raid10: retrieve page from preallocated resync page array Now one page array is allocated for each resync bio, and we can retrieve page from this table directly. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:34 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid1,raid10: Fix calculation of 'vcnt' when processing error recovery. If r1bio->sectors % 8 != 0,then the memcmp and a later memcpy will omit the last bio_vec. This is suitable for any stable kernel since 3.1 when bad-block management was introduced. Cc: stable@vger.kernel.org Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-12 16:04:47 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: raid10 read-error handling - resync and read-only Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:29 -08:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: raid10 read-error handling - resync and read-only Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:29 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: retrieve page from preallocated resync page array Now one page array is allocated for each resync bio, and we can retrieve page from this table directly. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:34 +08:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
[PATCH] md: raid10 read-error handling - resync and read-only Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:29 -08:00
md/raid10: fix two problems with RAID10 resync. 1/ When an different between blocks is found, data is copied from one bio to the other. However bv_len is used as the length to copy and this could be zero. So use r10_bio->sectors to calculate length instead. Using bv_len was probably always a bit dubious, but the introduction of bio_advance made it much more likely to be a problem. 2/ When preparing some blocks for sync, we don't set BIO_UPTODATE except on bios that we schedule for a read. This ensures that missing/failed devices don't confuse the loop at the top of sync_request write. Commit 8be185f2c9d54d6 "raid10: Use bio_reset()" removed a loop which set BIO_UPTDATE on all appropriate bios. So we need to re-add that flag. These bugs were introduced in 3.10, so this patch is suitable for 3.10-stable, and can remove a potential for data corruption. Cc: stable@vger.kernel.org (3.10) Reported-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-16 16:50:47 +10:00
md: raid10: retrieve page from preallocated resync page array Now one page array is allocated for each resync bio, and we can retrieve page from this table directly. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:34 +08:00
md/raid10: fix two problems with RAID10 resync. 1/ When an different between blocks is found, data is copied from one bio to the other. However bv_len is used as the length to copy and this could be zero. So use r10_bio->sectors to calculate length instead. Using bv_len was probably always a bit dubious, but the introduction of bio_advance made it much more likely to be a problem. 2/ When preparing some blocks for sync, we don't set BIO_UPTODATE except on bios that we schedule for a read. This ensures that missing/failed devices don't confuse the loop at the top of sync_request write. Commit 8be185f2c9d54d6 "raid10: Use bio_reset()" removed a loop which set BIO_UPTDATE on all appropriate bios. So we need to re-add that flag. These bugs were introduced in 3.10, so this patch is suitable for 3.10-stable, and can remove a potential for data corruption. Cc: stable@vger.kernel.org (3.10) Reported-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-16 16:50:47 +10:00
[PATCH] md: raid10 read-error handling - resync and read-only Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:29 -08:00
md/raid10: fix two problems with RAID10 resync. 1/ When an different between blocks is found, data is copied from one bio to the other. However bv_len is used as the length to copy and this could be zero. So use r10_bio->sectors to calculate length instead. Using bv_len was probably always a bit dubious, but the introduction of bio_advance made it much more likely to be a problem. 2/ When preparing some blocks for sync, we don't set BIO_UPTODATE except on bios that we schedule for a read. This ensures that missing/failed devices don't confuse the loop at the top of sync_request write. Commit 8be185f2c9d54d6 "raid10: Use bio_reset()" removed a loop which set BIO_UPTDATE on all appropriate bios. So we need to re-add that flag. These bugs were introduced in 3.10, so this patch is suitable for 3.10-stable, and can remove a potential for data corruption. Cc: stable@vger.kernel.org (3.10) Reported-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-16 16:50:47 +10:00
[PATCH] md: raid10 read-error handling - resync and read-only Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:29 -08:00
Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races Now that multiple threads can handle stripes, it is safer to use an atomic64_t for resync_mismatches, to avoid update races. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 14:17:59 +11:00
md/raid10: attempt to fix read errors during resync/check We already attempt to fix read errors found during normal IO and a 'repair' process. It is best to try to repair them at any time they are found, so move a test so that during sync and check a read error will be corrected by over-writing with good data. If both (all) devices have known bad blocks in the sync section we won't try to fix even though the bad blocks might not overlap. That should be considered later. Also if we hit a read error during recovery we don't try to fix it. It would only be possible to fix if there were at least three copies of data, which is not very common with RAID10. But it should still be considered later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
[PATCH] md: raid10 read-error handling - resync and read-only Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:29 -08:00
md/raid10: attempt to fix read errors during resync/check We already attempt to fix read errors found during normal IO and a 'repair' process. It is best to try to repair them at any time they are found, so move a test so that during sync and check a read error will be corrected by over-writing with good data. If both (all) devices have known bad blocks in the sync section we won't try to fix even though the bad blocks might not overlap. That should be considered later. Also if we hit a read error during recovery we don't try to fix it. It would only be possible to fix if there were at least three copies of data, which is not very common with RAID10. But it should still be considered later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
block: pass a block_device and opf to bio_reset Pass the block_device that we plan to use this bio for and the operation to bio_reset to optimize the assigment. A NULL block_device can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:11:07 +01:00
raid10: Use bio_reset() More prep work for immutable bio vecs, mainly getting rid of references to bi_idx. bio_reset was being open coded in a few places. The one in sync_request was a bit nontrivial to convert, so could use some extra eyeballs. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: NeilBrown <neilb@suse.de> Acked-by: NeilBrown <neilb@suse.de>
2012-09-06 14:14:43 -07:00
md: raid1/raid10: initialize bvec table via bio_add_page() We will support multipage bvec soon, so initialize bvec table using the standardy way instead of writing the talbe directly. Otherwise it won't work any more once multipage bvec is enabled. Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-14 16:14:43 +08:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: make sync_request_write() call bio_copy_data() Refactor sync_request_write() of md/raid10 to use bio_copy_data() instead of open coding bio_vec iterations. Cc: Christoph Hellwig <hch@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: add more description in commit message] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <mlin@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-06 23:34:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Use bio_sectors() more consistently Bunch of places in the code weren't using it where they could be - this'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: "Ed L. Cashin" <ecashin@coraid.com> CC: Nick Piggin <npiggin@kernel.dk> CC: Jiri Kosina <jkosina@suse.cz> CC: Jim Paris <jim@jtan.com> CC: Geoff Levand <geoff@infradead.org> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ed Cashin <ecashin@coraid.com>
2013-02-05 15:19:29 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: add failfast handling for writes. When writing to a fastfail device, we use MD_FASTFAIL unless it is the only device being written to. For resync/recovery, assume there was a working device to read from so always use MD_FASTFAIL. If a write for resync/recovery fails, we just fail the device - there is not much else to do. If a normal write fails, but the device cannot be marked Faulty (must be only one left), we queue for write error handling which calls narrow_write_error() to write the block synchronously without any failfast flags. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: make sync_request_write() call bio_copy_data() Refactor sync_request_write() of md/raid10 to use bio_copy_data() instead of open coding bio_vec iterations. Cc: Christoph Hellwig <hch@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: add more description in commit message] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <mlin@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-06 23:34:20 -07:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: make sync_request_write() call bio_copy_data() Refactor sync_request_write() of md/raid10 to use bio_copy_data() instead of open coding bio_vec iterations. Cc: Christoph Hellwig <hch@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: add more description in commit message] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <mlin@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-06 23:34:20 -07:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
block: Use bio_sectors() more consistently Bunch of places in the code weren't using it where they could be - this'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: "Ed L. Cashin" <ecashin@coraid.com> CC: Nick Piggin <npiggin@kernel.dk> CC: Jiri Kosina <jkosina@suse.cz> CC: Jim Paris <jim@jtan.com> CC: Geoff Levand <geoff@infradead.org> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ed Cashin <ecashin@coraid.com>
2013-02-05 15:19:29 -08:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md: raid10: retrieve page from preallocated resync page array Now one page array is allocated for each resync bio, and we can retrieve page from this table directly. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:34 +08:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md: raid10: retrieve page from preallocated resync page array Now one page array is allocated for each resync bio, and we can retrieve page from this table directly. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:34 +08:00
md/core: Combine two sync_page_io() arguments Improve uniformity in the kernel of handling of request operation and flags by passing these as a single argument. Cc: Song Liu <song@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 11:06:57 -07:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md: raid10: retrieve page from preallocated resync page array Now one page array is allocated for each resync bio, and we can retrieve page from this table directly. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:34 +08:00
md/core: Combine two sync_page_io() arguments Improve uniformity in the kernel of handling of request operation and flags by passing these as a single argument. Cc: Song Liu <song@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 11:06:57 -07:00
md/raid10: If there is a spare and a want_replacement device, start replacement. When attempting to add a spare to a RAID10 array, also consider adding it as a replacement for a want_replacement device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: If there is a spare and a want_replacement device, start replacement. When attempting to add a spare to a RAID10 array, also consider adding it as a replacement for a want_replacement device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: share pages between read and write bio's during recovery When performing a recovery, only first 2 slots in r10_bio are in use, for read and write respectively. However all of pages in the write bio are never used and just replaced to read bio's when the read completes. Get rid of those unused pages and share read pages properly. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:49 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: share pages between read and write bio's during recovery When performing a recovery, only first 2 slots in r10_bio are in use, for read and write respectively. However all of pages in the write bio are never used and just replaced to read bio's when the read completes. Get rid of those unused pages and share read pages properly. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-18 17:38:49 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: remove use-after-free bug. We always need to be careful when calling generic_make_request, as it can start a chain of events which might free something that we are using. Here is one place I wasn't careful enough. If the wbio2 is not in use, then it might get freed at the first generic_make_request call. So perform all necessary tests first. This bug was introduced in 3.3-rc3 (24afd80d99) and can cause an oops, so fix is suitable for any -stable since then. Cc: stable@vger.kernel.org (3.3+) Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-24 15:37:42 +10:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md/raid10: remove use-after-free bug. We always need to be careful when calling generic_make_request, as it can start a chain of events which might free something that we are using. Here is one place I wasn't careful enough. If the wbio2 is not in use, then it might get freed at the first generic_make_request call. So perform all necessary tests first. This bug was introduced in 3.3-rc3 (24afd80d99) and can cause an oops, so fix is suitable for any -stable since then. Cc: stable@vger.kernel.org (3.3+) Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-24 15:37:42 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
block: Use bio_sectors() more consistently Bunch of places in the code weren't using it where they could be - this'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: "Ed L. Cashin" <ecashin@coraid.com> CC: Nick Piggin <npiggin@kernel.dk> CC: Jiri Kosina <jkosina@suse.cz> CC: Jim Paris <jim@jtan.com> CC: Geoff Levand <geoff@infradead.org> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ed Cashin <ecashin@coraid.com>
2013-02-05 15:19:29 -08:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: remove use-after-free bug. We always need to be careful when calling generic_make_request, as it can start a chain of events which might free something that we are using. Here is one place I wasn't careful enough. If the wbio2 is not in use, then it might get freed at the first generic_make_request call. So perform all necessary tests first. This bug was introduced in 3.3-rc3 (24afd80d99) and can cause an oops, so fix is suitable for any -stable since then. Cc: stable@vger.kernel.org (3.3+) Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-24 15:37:42 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
block: Use bio_sectors() more consistently Bunch of places in the code weren't using it where they could be - this'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: "Ed L. Cashin" <ecashin@coraid.com> CC: Nick Piggin <npiggin@kernel.dk> CC: Jiri Kosina <jkosina@suse.cz> CC: Jim Paris <jim@jtan.com> CC: Geoff Levand <geoff@infradead.org> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ed Cashin <ecashin@coraid.com>
2013-02-05 15:19:29 -08:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md: use seconds granularity for error logging The md code stores the exact time of the last error in the last_read_error variable using a timespec structure. It only ever uses the seconds portion of that though, so we can use a scalar for it. There won't be an overflow in 2038 here, because it already used monotonic time and 32-bit is enough for that, but I've decided to use time64_t for consistency in the conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-17 17:33:10 +02:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md: use seconds granularity for error logging The md code stores the exact time of the last error in the last_read_error variable using a timespec structure. It only ever uses the seconds portion of that though, so we can use a scalar for it. There won't be an overflow in 2038 here, because it already used monotonic time and 32-bit is enough for that, but I've decided to use time64_t for consistency in the conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-17 17:33:10 +02:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md: use seconds granularity for error logging The md code stores the exact time of the last error in the last_read_error variable using a timespec structure. It only ever uses the seconds portion of that though, so we can use a scalar for it. There won't be an overflow in 2038 here, because it already used monotonic time and 32-bit is enough for that, but I've decided to use time64_t for consistency in the conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-17 17:33:10 +02:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md: use seconds granularity for error logging The md code stores the exact time of the last error in the last_read_error variable using a timespec structure. It only ever uses the seconds portion of that though, so we can use a scalar for it. There won't be an overflow in 2038 here, because it already used monotonic time and 32-bit is enough for that, but I've decided to use time64_t for consistency in the conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-17 17:33:10 +02:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md/raid10: Fix the data type of an r10_sync_page_io() argument Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen <rong.a.chen@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Song Liu <song@kernel.org>
2022-08-10 11:20:12 -07:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: Fix the data type of an r10_sync_page_io() argument Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen <rong.a.chen@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Song Liu <song@kernel.org>
2022-08-10 11:20:12 -07:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: Fix the data type of an r10_sync_page_io() argument Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen <rong.a.chen@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Song Liu <song@kernel.org>
2022-08-10 11:20:12 -07:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: Fix the data type of an r10_sync_page_io() argument Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen <rong.a.chen@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Song Liu <song@kernel.org>
2022-08-10 11:20:12 -07:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: If there is a spare and a want_replacement device, start replacement. When attempting to add a spare to a RAID10 array, also consider adding it as a replacement for a want_replacement device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md: fix an error code format and remove unsed bio_sector Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-04-23 17:37:30 +08:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md: raid10: Fix null pointer dereference in fix_read_error() Such NULL pointer dereference can occur when the driver was fixing the read errors/bad blocks and the disk was physically removed causing a system crash. This patch check if the rcu_dereference() returns valid rdev before accessing it in fix_read_error(). Cc: stable@kernel.org Signed-off-by: Prasanna S. Panchamukhi <prasanna.panchamukhi@riverbed.com> Signed-off-by: Rob Becker <rbecker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:31:03 +10:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md/raid10: some tidying up in fix_read_error Currently the rdev on which a read error happened could be removed before we perform the fix_error handling. This requires extra tests for NULL. So delay the rdev_dec_pending call until after the call to fix_read_error so that we can be sure that the rdev still exists. This allows an 'if' clause to be removed so the body gets re-indented back one level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:53:17 +10:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md/raid10: some tidying up in fix_read_error Currently the rdev on which a read error happened could be removed before we perform the fix_error handling. This requires extra tests for NULL. So delay the rdev_dec_pending call until after the call to fix_read_error so that we can be sure that the rdev still exists. This allows an 'if' clause to be removed so the body gets re-indented back one level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:53:17 +10:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
md/raid10: some tidying up in fix_read_error Currently the rdev on which a read error happened could be removed before we perform the fix_error handling. This requires extra tests for NULL. So delay the rdev_dec_pending call until after the call to fix_read_error so that we can be sure that the rdev still exists. This allows an 'if' clause to be removed so the body gets re-indented back one level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:53:17 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: minor code improvement in fix_read_error() rdev already holds conf->mirrors[d].rdev, so no need to load it again. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
md/raid10: some tidying up in fix_read_error Currently the rdev on which a read error happened could be removed before we perform the fix_error handling. This requires extra tests for NULL. So delay the rdev_dec_pending call until after the call to fix_read_error so that we can be sure that the rdev still exists. This allows an 'if' clause to be removed so the body gets re-indented back one level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:53:17 +10:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10 - avoid reading from known bad blocks - part 3 When attempting to repair a read error, don't read from devices with a known bad block. As we are only reading PAGE_SIZE blocks, we don't try to narrow down to smaller regions in the hope that only part of this page is bad - it isn't worth the effort. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: raid10: Fix null pointer dereference in fix_read_error() Such NULL pointer dereference can occur when the driver was fixing the read errors/bad blocks and the disk was physically removed causing a system crash. This patch check if the rcu_dereference() returns valid rdev before accessing it in fix_read_error(). Cc: stable@kernel.org Signed-off-by: Prasanna S. Panchamukhi <prasanna.panchamukhi@riverbed.com> Signed-off-by: Rob Becker <rbecker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:31:03 +10:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10 - avoid reading from known bad blocks - part 3 When attempting to repair a read error, don't read from devices with a known bad block. As we are only reading PAGE_SIZE blocks, we don't try to narrow down to smaller regions in the hope that only part of this page is bad - it isn't worth the effort. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: be extra careful not to take a reference to a Faulty device. It is important that we never increment rdev->nr_pending on a Faulty device as ->hot_remove_disk() assumes that once the Faulty flag is visible no code will take a new reference. Some places take a new reference after only check In_sync. This should be safe as the two are changed together. However to make the code more obviously safe, add checks for 'Faulty' as well. Note: the actual rule is: Never increment nr_pending if Faulty is set and Blocked is clear, never clear Faulty, and never set Blocked without holding a reference through nr_pending. fix build error (Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:53 +10:00
md/raid10 - avoid reading from known bad blocks - part 3 When attempting to repair a read error, don't read from devices with a known bad block. As we are only reading PAGE_SIZE blocks, we don't try to narrow down to smaller regions in the hope that only part of this page is bad - it isn't worth the effort. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md: change type of first arg to sync_page_io. Currently sync_page_io takes a 'bdev'. Every caller passes 'rdev->bdev'. We will soon want another field out of the rdev in sync_page_io, So just pass the rdev instead of the bdev out of it. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-27 15:16:40 +11:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md-new-param-to_sync_page_io Add new parameter to 'sync_page_io'. The new parameter allows us to distinguish between metadata and data operations. This becomes important later when we add the ability to use separate devices for data and metadata. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
2011-01-14 09:14:33 +11:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
md/core: Combine two sync_page_io() arguments Improve uniformity in the kernel of handling of request operation and flags by passing these as a single argument. Cc: Song Liu <song@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 11:06:57 -07:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: be extra careful not to take a reference to a Faulty device. It is important that we never increment rdev->nr_pending on a Faulty device as ->hot_remove_disk() assumes that once the Faulty flag is visible no code will take a new reference. Some places take a new reference after only check In_sync. This should be safe as the two are changed together. However to make the code more obviously safe, add checks for 'Faulty' as well. Note: the actual rule is: Never increment nr_pending if Faulty is set and Blocked is clear, never clear Faulty, and never set Blocked without holding a reference through nr_pending. fix build error (Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:53 +10:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: Fix the data type of an r10_sync_page_io() argument Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen <rong.a.chen@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Song Liu <song@kernel.org>
2022-08-10 11:20:12 -07:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: be extra careful not to take a reference to a Faulty device. It is important that we never increment rdev->nr_pending on a Faulty device as ->hot_remove_disk() assumes that once the Faulty flag is visible no code will take a new reference. Some places take a new reference after only check In_sync. This should be safe as the two are changed together. However to make the code more obviously safe, add checks for 'Faulty' as well. Note: the actual rule is: Never increment nr_pending if Faulty is set and Blocked is clear, never clear Faulty, and never set Blocked without holding a reference through nr_pending. fix build error (Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:53 +10:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: Fix the data type of an r10_sync_page_io() argument Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen <rong.a.chen@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Song Liu <song@kernel.org>
2022-08-10 11:20:12 -07:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: handle further errors during fix_read_error better. If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md: remove most calls to bdevname Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-12 08:19:13 +02:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md/raid10: simplify/reindent some loops. When a loop ends with a large if, it can be neater to change the if to invert the condition and just 'continue'. Then the body of the if can be indented to a lower level. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
[PATCH] md: factor out part of raid10d into a separate function. raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:45 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: round up to bdev_logical_block_size in narrow_write_error. RAID10 version of earlier fix for RAID1. We must never initiate IO with sizes less that logical_block_size. Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-16 14:51:54 +11:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
raid10: record correct address of bad block For failed write request record block address on a device, not block address in an array. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-08-23 10:53:57 +02:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
block: pass a block_device to bio_clone_fast Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 17:01:09 +01:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
raid10: record correct address of bad block For failed write request record block address on a device, not block address in an array. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-08-23 10:53:57 +02:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
block/fs/drivers: remove rw argument from submit_bio This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:31:41 -05:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
raid10: record correct address of bad block For failed write request record block address on a device, not block address in an array. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-08-23 10:53:57 +02:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md/raid10: Split handle_read_error out from raid10d. raid10d() is too big and is about to get bigger, so split handle_read_error() out as a separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: Split handle_read_error out from raid10d. raid10d() is too big and is about to get bigger, so split handle_read_error() out as a separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid1,raid10: use freeze_array in place of raise_barrier in various places. Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b66152f87c7 (raid10) and 6b740b8d79252f13 (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-12 11:01:22 +10:00
md/raid10: Split handle_read_error out from raid10d. raid10d() is too big and is about to get bigger, so split handle_read_error() out as a separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: fix handling of error on last working device in array. If we get a read error on the last working device in a RAID10 which contains the target block, then we don't fail the device (which is good) but we don't abort retries, which is wrong. We end up in an infinite loop retrying the read on the one device. This patch fixes the problem in two places: 1/ in raid10_end_read_request we don't even ask for a retry if this was the last usable device. This is efficient but a little racy and will sometimes retry when it should not. 2/ in handle_read_error we are careful to exclude any device from retry which we tried to mark as faulty (that might have failed if it was the last device). This is race-free but less efficient. Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
md/raid10: preferentially read from replacement device if possible. When reading (for array reads, not for recovery etc) we read from the replacement device if it has recovered far enough. This requires storing the chosen rdev in the 'r10_bio' so we can make sure to drop the ref on the right device when the read finishes. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: simplify handle_read_error() handle_read_error() duplicates a lot of the work that raid10_read_request() does, so it makes sense to just use that function. handle_read_error() relies on the same r10bio being re-used so that, in the case of a read-only array, setting IO_BLOCKED in r1bio->devs[].bio ensures read_balance() won't re-use that device. So when called from raid10_make_request() we clear that array, but not when called from handle_read_error(). Two parts of handle_read_error() that need to be preserved are the warning message it prints, so they are conditionally added to raid10_read_request(). If the failing rdev can be found, messages are printed. Otherwise they aren't. Not that as rdev_dec_pending() has already been called on the failing rdev, we need to use rcu_read_lock() to get a new reference from the conf. We only use this to get the name of the failing block device. With this change, we no longer need inc_pending(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Split handle_read_error out from raid10d. raid10d() is too big and is about to get bigger, so split handle_read_error() out as a separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: record bad blocks due to write errors during resync/recovery. If we get a write error during resync/recovery don't fail the device but instead record a bad block. If that fails we can then fail the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: record bad blocks due to write errors during resync/recovery. If we get a write error during resync/recovery don't fail the device but instead record a bad block. If that fails we can then fail the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md raid10: fix NULL deference in handle_write_completed() In the case of 'recover', an r10bio with R10BIO_WriteError & R10BIO_IsRecover will be progressed by handle_write_completed(). This function traverses all r10bio->devs[copies]. If devs[m].repl_bio != NULL, it thinks conf->mirrors[dev].replacement is also not NULL. However, this is not always true. When there is an rdev of raid10 has replacement, then each r10bio ->devs[m].repl_bio != NULL in conf->r10buf_pool. However, in 'recover', even if corresponded replacement is NULL, it doesn't clear r10bio ->devs[m].repl_bio, resulting in replacement NULL deference. This bug was introduced when replacement support for raid10 was added in Linux 3.3. As NeilBrown suggested: Elsewhere the determination of "is this device part of the resync/recovery" is made by resting bio->bi_end_io. If this is end_sync_write, then we tried to write here. If it is NULL, then we didn't try to write. Fixes: 9ad1aefc8ae8 ("md/raid10: Handle replacement devices during resync.") Cc: stable (V3.3+) Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-06 17:39:15 +08:00
md/raid10: record bad blocks due to write errors during resync/recovery. If we get a write error during resync/recovery don't fail the device but instead record a bad block. If that fails we can then fail the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: add possibility to change data-offset for devices. When reshaping we can avoid costly intermediate backup by changing the 'start' address of the array on the device (if there is enough room). So as a first step, allow such a change to be requested through sysfs, and recorded in v1.x metadata. (As we didn't previous check that all 'pad' fields were zero, we need a new FEATURE flag for this. A (belatedly) check that all remaining 'pad' fields are zero to avoid a repeat of this) The new data offset must be requested separately for each device. This allows each to have a different change in the data offset. This is not likely to be used often but as data_offset can be set per-device, new_data_offset should be too. This patch also removes the 'acknowledged' arg to rdev_set_badblocks as it is never used and never will be. At the same time we add a new arg ('in_new') which is currently always zero but will be used more soon. When a reshape finishes we will need to update the data_offset and rdev->sectors. So provide an exported function to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
md/raid10: record bad blocks due to write errors during resync/recovery. If we get a write error during resync/recovery don't fail the device but instead record a bad block. If that fails we can then fail the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md raid10: fix NULL deference in handle_write_completed() In the case of 'recover', an r10bio with R10BIO_WriteError & R10BIO_IsRecover will be progressed by handle_write_completed(). This function traverses all r10bio->devs[copies]. If devs[m].repl_bio != NULL, it thinks conf->mirrors[dev].replacement is also not NULL. However, this is not always true. When there is an rdev of raid10 has replacement, then each r10bio ->devs[m].repl_bio != NULL in conf->r10buf_pool. However, in 'recover', even if corresponded replacement is NULL, it doesn't clear r10bio ->devs[m].repl_bio, resulting in replacement NULL deference. This bug was introduced when replacement support for raid10 was added in Linux 3.3. As NeilBrown suggested: Elsewhere the determination of "is this device part of the resync/recovery" is made by resting bio->bi_end_io. If this is end_sync_write, then we tried to write here. If it is NULL, then we didn't try to write. Fixes: 9ad1aefc8ae8 ("md/raid10: Handle replacement devices during resync.") Cc: stable (V3.3+) Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-06 17:39:15 +08:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: add possibility to change data-offset for devices. When reshaping we can avoid costly intermediate backup by changing the 'start' address of the array on the device (if there is enough room). So as a first step, allow such a change to be requested through sysfs, and recorded in v1.x metadata. (As we didn't previous check that all 'pad' fields were zero, we need a new FEATURE flag for this. A (belatedly) check that all remaining 'pad' fields are zero to avoid a repeat of this) The new data offset must be requested separately for each device. This allows each to have a different change in the data offset. This is not likely to be used often but as data_offset can be set per-device, new_data_offset should be too. This patch also removes the 'acknowledged' arg to rdev_set_badblocks as it is never used and never will be. At the same time we add a new arg ('in_new') which is currently always zero but will be used more soon. When a reshape finishes we will need to update the data_offset and rdev->sectors. So provide an exported function to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: record bad blocks due to write errors during resync/recovery. If we get a write error during resync/recovery don't fail the device but instead record a bad block. If that fails we can then fail the device. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md: add possibility to change data-offset for devices. When reshaping we can avoid costly intermediate backup by changing the 'start' address of the array on the device (if there is enough room). So as a first step, allow such a change to be requested through sysfs, and recorded in v1.x metadata. (As we didn't previous check that all 'pad' fields were zero, we need a new FEATURE flag for this. A (belatedly) check that all remaining 'pad' fields are zero to avoid a repeat of this) The new data offset must be requested separately for each device. This allows each to have a different change in the data offset. This is not likely to be used often but as data_offset can be set per-device, new_data_offset should be too. This patch also removes the 'acknowledged' arg to rdev_set_badblocks as it is never used and never will be. At the same time we add a new arg ('in_new') which is currently always zero but will be used more soon. When a reshape finishes we will need to update the data_offset and rdev->sectors. So provide an exported function to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Allow replacement device to be replace old drive. When recovery finish and spare_active is called, check for a replace that might have just become fully synced and mark it as such, marking the original as failed. Then when the original is removed, move the replacement into its position. This means that 'replacement' and spontaneously become NULL in some situations. Make sure we check for those. It also means that 'rdev' and 'replacement' could appear to be identical - check for that too. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: add possibility to change data-offset for devices. When reshaping we can avoid costly intermediate backup by changing the 'start' address of the array on the device (if there is enough room). So as a first step, allow such a change to be requested through sysfs, and recorded in v1.x metadata. (As we didn't previous check that all 'pad' fields were zero, we need a new FEATURE flag for this. A (belatedly) check that all remaining 'pad' fields are zero to avoid a repeat of this) The new data offset must be requested separately for each device. This allows each to have a different change in the data offset. This is not likely to be used often but as data_offset can be set per-device, new_data_offset should be too. This patch also removes the 'acknowledged' arg to rdev_set_badblocks as it is never used and never will be. At the same time we add a new arg ('in_new') which is currently always zero but will be used more soon. When a reshape finishes we will need to update the data_offset and rdev->sectors. So provide an exported function to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
md/raid10: writes should get directed to replacement as well as original. When writing, we need to submit two writes, one to the original, and one to the replacements - if there is a replacement. If the write to the replacement results in a write error we just fail the device. We only try to record write errors to the original. This only handles writing new data. Writing for resync/recovery will come later. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
raid10: include bio_end_io_list in nr_queued to prevent freeze_array hang This is the raid10 counterpart of the bug fixed by Nate (raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang) Fixes: 95af587e95(md/raid10: ensure device failure recorded before write request returns) Cc: stable@vger.kernel.org (V4.3+) Cc: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-03-14 11:49:32 -07:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md/raid10: wait up frozen array in handle_write_completed Since nr_queued is changed, we need to call wake_up here if the array is already frozen and waiting for condition "nr_pending == nr_queued + extra" to be true. And commit 824e47daddbf ("RAID1: avoid unnecessary spin locks in I/O barrier code") which has already added the wake_up for raid1. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-17 17:11:05 +08:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md/raid10: don't clear bitmap bit when bad-block-list write fails. When a write fails and a bad-block-list is present, we can update the bad-block-list instead of writing the data. If this succeeds then it is OK clear the relevant bitmap-bit as no further 'sync' of the block is needed. However if writing the bad-block-list fails then we need to treat the write as failed and particularly must not clear the bitmap bit. Otherwise the device can be re-added (after any hardware connection issues are resolved) and because the relevant bit in the bitmap is clear, that block will not be resynced. This leads to data corruption. We already delay the final bio_endio() on the write until the bad-block-list is written so that when the write returns: either that data is safe, the bad-block record is safe, or the fact that the device is faulty is safe. However we *don't* delay the clearing of the bitmap, so the bitmap bit can be recorded as cleared before we know if the bad-block-list was written safely. So: delay that until the write really is safe. i.e. move the call to close_write() until just before calling bio_endio(), and recheck the 'is array degraded' status before making that call. This bug goes back to v3.1 when bad-block-lists were introduced, though it only affects arrays created with mdadm-3.3 or later as only those have bad-block lists. Backports will require at least Commit: 95af587e95aa ("md/raid10: ensure device failure recorded before write request returns.") as well. I'll send that to 'stable' separately. Note that of the two tests of R10BIO_WriteError that this patch adds, the first is certain to fail and the second is certain to succeed. However doing it this way makes the patch more obviously correct. I will tidy the code up in a future merge window. Reported-by: Nate Dailey <nate.dailey@stratus.com> Fixes: bd870a16c594 ("md/raid10: Handle write errors by updating badblock log.") Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24 16:23:48 +11:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md/raid10: don't clear bitmap bit when bad-block-list write fails. When a write fails and a bad-block-list is present, we can update the bad-block-list instead of writing the data. If this succeeds then it is OK clear the relevant bitmap-bit as no further 'sync' of the block is needed. However if writing the bad-block-list fails then we need to treat the write as failed and particularly must not clear the bitmap bit. Otherwise the device can be re-added (after any hardware connection issues are resolved) and because the relevant bit in the bitmap is clear, that block will not be resynced. This leads to data corruption. We already delay the final bio_endio() on the write until the bad-block-list is written so that when the write returns: either that data is safe, the bad-block record is safe, or the fact that the device is faulty is safe. However we *don't* delay the clearing of the bitmap, so the bitmap bit can be recorded as cleared before we know if the bad-block-list was written safely. So: delay that until the write really is safe. i.e. move the call to close_write() until just before calling bio_endio(), and recheck the 'is array degraded' status before making that call. This bug goes back to v3.1 when bad-block-lists were introduced, though it only affects arrays created with mdadm-3.3 or later as only those have bad-block lists. Backports will require at least Commit: 95af587e95aa ("md/raid10: ensure device failure recorded before write request returns.") as well. I'll send that to 'stable' separately. Note that of the two tests of R10BIO_WriteError that this patch adds, the first is certain to fail and the second is certain to succeed. However doing it this way makes the patch more obviously correct. I will tidy the code up in a future merge window. Reported-by: Nate Dailey <nate.dailey@stratus.com> Fixes: bd870a16c594 ("md/raid10: Handle write errors by updating badblock log.") Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24 16:23:48 +11:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
MD: change the parameter of md thread Change the thread parameter, so the thread can carry extra info. Next patch will use it. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:34:00 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD: change the parameter of md thread Change the thread parameter, so the thread can carry extra info. Next patch will use it. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:34:00 +11:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: use new plugging interface for RAID IO. md/raid submits a lot of IO from the various raid threads. So adding start/finish plug calls to those so that some plugging happens. Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:41 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
raid10: include bio_end_io_list in nr_queued to prevent freeze_array hang This is the raid10 counterpart of the bug fixed by Nate (raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang) Fixes: 95af587e95(md/raid10: ensure device failure recorded before write request returns) Cc: stable@vger.kernel.org (V4.3+) Cc: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-03-14 11:49:32 -07:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
crash in md-raid1 and md-raid10 due to incorrect list manipulation The commit 55ce74d4bfe1b9444436264c637f39a152d1e5ac (md/raid1: ensure device failure recorded before write request returns) is causing crash in the LVM2 testsuite test shell/lvchange-raid.sh. For me the crash is 100% reproducible. The reason for the crash is that the newly added code in raid1d moves the list from conf->bio_end_io_list to tmp, then tests if tmp is non-empty and then incorrectly pops the bio from conf->bio_end_io_list (which is empty because the list was alrady moved). Raid-10 has a similar bug. Kernel Fault: Code=15 regs=000000006ccb8640 (Addr=0000000100000000) CPU: 3 PID: 1930 Comm: mdX_raid1 Not tainted 4.2.0-rc5-bisect+ #35 task: 000000006cc1f258 ti: 000000006ccb8000 task.ti: 000000006ccb8000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111111000001111 Not tainted r00-03 000000ff0804fe0f 000000001059d000 000000001059f818 000000007f16be38 r04-07 000000001059d000 000000007f16be08 0000000000200200 0000000000000001 r08-11 000000006ccb8260 000000007b7934d0 0000000000000001 0000000000000000 r12-15 000000004056f320 0000000000000000 0000000000013dd0 0000000000000000 r16-19 00000000f0d00ae0 0000000000000000 0000000000000000 0000000000000001 r20-23 000000000800000f 0000000042200390 0000000000000000 0000000000000000 r24-27 0000000000000001 000000000800000f 000000007f16be08 000000001059d000 r28-31 0000000100000000 000000006ccb8560 000000006ccb8640 0000000000000000 sr00-03 0000000000249800 0000000000000000 0000000000000000 0000000000249800 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 000000001059f61c 000000001059f620 IIR: 0f8010c6 ISR: 0000000000000000 IOR: 0000000100000000 CPU: 3 CR30: 000000006ccb8000 CR31: 0000000000000000 ORIG_R28: 000000001059d000 IAOQ[0]: call_bio_endio+0x34/0x1a8 [raid1] IAOQ[1]: call_bio_endio+0x38/0x1a8 [raid1] RP(r2): raid_end_bio_io+0x88/0x168 [raid1] Backtrace: [<000000001059f818>] raid_end_bio_io+0x88/0x168 [raid1] [<00000000105a4f64>] raid1d+0x144/0x1640 [raid1] [<000000004017fd5c>] kthread+0x144/0x160 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 55ce74d4bfe1 ("md/raid1: ensure device failure recorded before write request returns.") Fixes: 95af587e95aa ("md/raid10: ensure device failure recorded before write request returns.") Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-01 15:17:43 -04:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md/raid10: don't clear bitmap bit when bad-block-list write fails. When a write fails and a bad-block-list is present, we can update the bad-block-list instead of writing the data. If this succeeds then it is OK clear the relevant bitmap-bit as no further 'sync' of the block is needed. However if writing the bad-block-list fails then we need to treat the write as failed and particularly must not clear the bitmap bit. Otherwise the device can be re-added (after any hardware connection issues are resolved) and because the relevant bit in the bitmap is clear, that block will not be resynced. This leads to data corruption. We already delay the final bio_endio() on the write until the bad-block-list is written so that when the write returns: either that data is safe, the bad-block record is safe, or the fact that the device is faulty is safe. However we *don't* delay the clearing of the bitmap, so the bitmap bit can be recorded as cleared before we know if the bad-block-list was written safely. So: delay that until the write really is safe. i.e. move the call to close_write() until just before calling bio_endio(), and recheck the 'is array degraded' status before making that call. This bug goes back to v3.1 when bad-block-lists were introduced, though it only affects arrays created with mdadm-3.3 or later as only those have bad-block lists. Backports will require at least Commit: 95af587e95aa ("md/raid10: ensure device failure recorded before write request returns.") as well. I'll send that to 'stable' separately. Note that of the two tests of R10BIO_WriteError that this patch adds, the first is certain to fail and the second is certain to succeed. However doing it this way makes the patch more obviously correct. I will tidy the code up in a future merge window. Reported-by: Nate Dailey <nate.dailey@stratus.com> Fixes: bd870a16c594 ("md/raid10: Handle write errors by updating badblock log.") Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24 16:23:48 +11:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md: use new plugging interface for RAID IO. md/raid submits a lot of IO from the various raid threads. So adding start/finish plug calls to those so that some plugging happens. Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:41 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md: remove plug_cnt feature of plugging. This seemed like a good idea at the time, but after further thought I cannot see it making a difference other than very occasionally and testing to try to exercise the case it is most likely to help did not show any performance difference by removing it. So remove the counting of active plugs and allow 'pending writes' to be activated at any time, not just when no plugs are active. This is only relevant when there is a write-intent bitmap, and the updating of the bitmap will likely introduce enough delay that the single-threading of bitmap updates will be enough to collect large numbers of updates together. Removing this will make it easier to centralise the unplug code, and will clear the other for other unplug enhancements which have a measurable effect. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31 09:08:14 +02:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: fix deadlock in md/raid1 and md/raid10 when handling a read error When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 14:29:29 -08:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove mddev_to_conf "helper" macro Having a macro just to cast a void* isn't really helpful. I would must rather see that we are simply de-referencing ->private, than have to know what the macro does. So open code the macro everywhere and remove the pointless cast. Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:54:21 +10:00
md/raid10: Handle write errors by updating badblock log. When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: clear bad-block record when write succeeds. If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove per-queue plugging Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: avoid reading from known bad blocks - part 1 This patch just covers the basic read path: 1/ read_balance needs to check for badblocks, and return not only the chosen slot, but also how many good blocks are available there. 2/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' On read error we currently just fail the request if another target cannot handle the whole request. Next patch refines that a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: Split handle_read_error out from raid10d. raid10d() is too big and is about to get bigger, so split handle_read_error() out as a separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: Split handle_read_error out from raid10d. raid10d() is too big and is about to get bigger, so split handle_read_error() out as a separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
md/raid1/raid10: add a cond_resched During 'check' of a raid1 or raid10 it is possible for the management thread to spend a lot of time running 'memcmp' on blocks from different devices, so make sure the thread has a chance to schedule. raid5d already has a cond_resched (in process_stripe). Reported-By: Lee Howard <faxguy@howardsilvan.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16 15:55:32 +11:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md: make it easier to wait for bad blocks to be acknowledged. It is only safe to choose not to write to a bad block if that bad block is safely recorded in metadata - i.e. if it has been 'acknowledged'. If it hasn't we need to wait for the acknowledgement. We support that using rdev->blocked wait and md_wait_for_blocked_rdev by introducing a new device flag 'BlockedBadBlock'. This flag is only advisory. It is cleared whenever we acknowledge a bad block, so that a waiter can re-check the particular bad blocks that it is interested it. It should be set by a caller when they find they need to wait. This (set after test) is inherently racy, but as md_wait_for_blocked_rdev already has a timeout, losing the race will have minimal impact. When we clear "Blocked" was also clear "BlockedBadBlocks" incase it was set incorrectly (see above race). We also modify the way we manage 'Blocked' to fit better with the new handling of 'BlockedBadBlocks' and to make it consistent between externally managed and internally managed metadata. This requires that each raidXd loop checks if the metadata needs to be written and triggers a write (md_check_recovery) if needed. Otherwise a queued write request might cause raidXd to wait for the metadata to write, and only that thread can write it. Before writing metadata, we set FaultRecorded for all devices that are Faulty, then after writing the metadata we clear Blocked for any device for which the Fault was certainly Recorded. The 'faulty' device flag now appears in sysfs if the device is faulty *or* it has unacknowledged bad blocks. So user-space which does not understand bad blocks can continue to function correctly. User space which does, should not assume a device is faulty until it sees the 'faulty' flag, and then sees the list of unacknowledged bad blocks is empty. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:31:48 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: use new plugging interface for RAID IO. md/raid submits a lot of IO from the various raid threads. So adding start/finish plug calls to those so that some plugging happens. Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:41 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: prepare data structures for handling replacement. Allow each slot in the RAID10 to have 2 devices, the want_replacement and the replacement. Also an r10bio to have 2 bios, and for resync/recovery allocate the second bio if there are any replacement devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid1/10: reset bio allocated from mempool Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-24 17:50:40 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md/raid1/10: reset bio allocated from mempool Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-24 17:50:40 -07:00
block: pass a block_device and opf to bio_reset Pass the block_device that we plan to use this bio for and the operation to bio_reset to optimize the assigment. A NULL block_device can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:11:07 +01:00
md/raid1/10: reset bio allocated from mempool Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-24 17:50:40 -07:00
block: pass a block_device and opf to bio_reset Pass the block_device that we plan to use this bio for and the operation to bio_reset to optimize the assigment. A NULL block_device can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:11:07 +01:00
md/raid1/10: reset bio allocated from mempool Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-24 17:50:40 -07:00
md-cluster: Use a small window for raid10 resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window is maintained in r10conf as cluster_sync_low and cluster_sync_high, and processed in raid10's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Set cluster_sync_high to cluster_sync_low + stripe size. 3. Send a message to all nodes so they may add it in their suspension list. Note: We only support "near" raid10 so far, resync a far or offset raid10 array could have trouble. So raid10_run checks the layout of clustered raid10, it will refuse to run if the layout is not correct. With the "near" layout we process one stripe at a time progressing monotonically through the address space. So we can have a sliding window of whole-stripes which moves through the array suspending IO on other nodes, and both resync which uses array addresses and recovery which uses device addresses can stay within this window. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD: rename some functions These short function names are hard to search. Rename them to make vim happy. Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-20 13:52:20 -08:00
md: remove 'go_faster' option from ->sync_request() This option is not well justified and testing suggests that it hardly ever makes any difference. The comment suggests there might be a need to wait for non-resync activity indicated by ->nr_waiting, however raise_barrier() already waits for all of that. So just remove it to simplify reasoning about speed limiting. This allows us to remove a 'FIXME' comment from raid5.c as that never used the flag. Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-19 16:04:40 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md: use sector_t in bitmap_get_counter bitmap_get_counter returns the number of sectors covered by the counter in a pass-by-reference variable. In some cases this can be very large, so make it a sector_t for safety. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-19 10:03:39 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md: remove 'idx' from 'struct resync_pages' bio_add_page() won't fail for resync bio, and the page index for each bio is same, so remove it. More importantly the 'idx' of 'struct resync_pages' is initialized in mempool allocator function, the current way is wrong since mempool is only responsible for allocation, we can't use that for initialization. Suggested-by: NeilBrown <neilb@suse.com> Reported-by: NeilBrown <neilb@suse.com> Reported-and-tested-by: Patrick <dto@gmx.net> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-14 16:14:42 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: improve the interface to sync_request 1/ change the return value (which is number-of-sectors synced) from 'int' to 'sector_t'. The number of sectors is usually easily small enough to fit in an int, but if resync needs to abort, it may want to return the total number of remaining sectors, which could be large. Also errors cannot be returned as negative numbers now, so use 0 instead 2/ Add a 'skipped' return parameter to allow the array to report that it skipped the sectors. This allows md to take this into account in the speed calculations. Currently there is no important skipping, but the bitmap-based-resync that is coming will use this. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:13 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Allow skipping recovery when clean arrays are assembled When an array is assembled incrementally with mdadm -I -R and the array switches to "active" mode, md starts a recovery. If the array was clean, the "fullsync" flag will be 0. Skip the full recovery in this case, as RAID1 does (the code was actually copied from the sync_request() method of RAID1). Signed-off-by: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24 11:42:42 +10:00
md/raid10: fix bug which causes all RAID10 reshapes to move no data. The recent comment: commit 7e83ccbecd608b971f340e951c9e84cd0343002f md/raid10: Allow skipping recovery when clean arrays are assembled Causes raid10 to skip a recovery in certain cases where it is safe to do so. Unfortunately it also causes a reshape to be skipped which is never safe. The result is that an attempt to reshape a RAID10 will appear to complete instantly, but no data will have been moves so the array will now contain garbage. (If nothing is written, you can recovery by simple performing the reverse reshape which will also complete instantly). Bug was introduced in 3.10, so this is suitable for 3.10-stable. Cc: stable@vger.kernel.org (3.10) Cc: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-04 16:41:53 +10:00
md/raid10: Allow skipping recovery when clean arrays are assembled When an array is assembled incrementally with mdadm -I -R and the array switches to "active" mode, md starts a recovery. If the array was clean, the "fullsync" flag will be 0. Skip the full recovery in this case, as RAID1 does (the code was actually copied from the sync_request() method of RAID1). Signed-off-by: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24 11:42:42 +10:00
md/raid10: fix bug which causes all RAID10 reshapes to move no data. The recent comment: commit 7e83ccbecd608b971f340e951c9e84cd0343002f md/raid10: Allow skipping recovery when clean arrays are assembled Causes raid10 to skip a recovery in certain cases where it is safe to do so. Unfortunately it also causes a reshape to be skipped which is never safe. The result is that an attempt to reshape a RAID10 will appear to complete instantly, but no data will have been moves so the array will now contain garbage. (If nothing is written, you can recovery by simple performing the reverse reshape which will also complete instantly). Bug was introduced in 3.10, so this is suitable for 3.10-stable. Cc: stable@vger.kernel.org (3.10) Cc: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-04 16:41:53 +10:00
md/raid10: Allow skipping recovery when clean arrays are assembled When an array is assembled incrementally with mdadm -I -R and the array switches to "active" mode, md starts a recovery. If the array was clean, the "fullsync" flag will be 0. Skip the full recovery in this case, as RAID1 does (the code was actually copied from the sync_request() method of RAID1). Signed-off-by: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24 11:42:42 +10:00
md/raid10: fix bug which causes all RAID10 reshapes to move no data. The recent comment: commit 7e83ccbecd608b971f340e951c9e84cd0343002f md/raid10: Allow skipping recovery when clean arrays are assembled Causes raid10 to skip a recovery in certain cases where it is safe to do so. Unfortunately it also causes a reshape to be skipped which is never safe. The result is that an attempt to reshape a RAID10 will appear to complete instantly, but no data will have been moves so the array will now contain garbage. (If nothing is written, you can recovery by simple performing the reverse reshape which will also complete instantly). Bug was introduced in 3.10, so this is suitable for 3.10-stable. Cc: stable@vger.kernel.org (3.10) Cc: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-04 16:41:53 +10:00
md/raid10: Allow skipping recovery when clean arrays are assembled When an array is assembled incrementally with mdadm -I -R and the array switches to "active" mode, md starts a recovery. If the array was clean, the "fullsync" flag will be 0. Skip the full recovery in this case, as RAID1 does (the code was actually copied from the sync_request() method of RAID1). Signed-off-by: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24 11:42:42 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Make mddev->size sector-based. This patch renames the "size" field of struct mddev_s to "dev_sectors" and stores the number of 512-byte sectors instead of the number of 1K-blocks in it. All users of that field, including raid levels 1,4-6,10, are adjusted accordingly. This simplifies the code a bit because it allows to get rid of a couple of divisions/multiplications by two. In order to make checkpatch happy, some minor coding style issues have also been addressed. In particular, size_store() now uses strict_strtoull() instead of simple_strtoull(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md-cluster: Use a small window for raid10 resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window is maintained in r10conf as cluster_sync_low and cluster_sync_high, and processed in raid10's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Set cluster_sync_high to cluster_sync_low + stripe size. 3. Send a message to all nodes so they may add it in their suspension list. Note: We only support "near" raid10 so far, resync a far or offset raid10 array could have trouble. So raid10_run checks the layout of clustered raid10, it will refuse to run if the layout is not correct. With the "near" layout we process one stripe at a time progressing monotonically through the address space. So we can have a sliding window of whole-stripes which moves through the array suspending IO on other nodes, and both resync which uses array addresses and recovery which uses device addresses can stay within this window. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:52 +08:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: Fix memory leak when raid10 reshape completes. When a raid10 commences a resync/recovery/reshape it allocates some buffer space. When a resync/recovery completes the buffer space is freed. But not when the reshape completes. This can result in a small memory leak. There is a subtle side-effect of this bug. When a RAID10 is reshaped to a larger array (more devices), the reshape is immediately followed by a "resync" of the new space. This "resync" will use the buffer space which was allocated for "reshape". This can cause problems including a "BUG" in the SCSI layer. So this is suitable for -stable. Cc: stable@vger.kernel.org (v3.5+) Fixes: 3ea7daa5d7fde47cd41f4d56c2deb949114da9d6 Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-18 13:59:50 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: improve the interface to sync_request 1/ change the return value (which is number-of-sectors synced) from 'int' to 'sector_t'. The number of sectors is usually easily small enough to fit in an int, but if resync needs to abort, it may want to return the total number of remaining sectors, which could be large. Also errors cannot be returned as negative numbers now, so use 0 instead 2/ Add a 'skipped' return parameter to allow the array to report that it skipped the sectors. This allows md to take this into account in the speed calculations. Currently there is no important skipping, but the bitmap-based-resync that is coming will use this. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:13 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: improve the interface to sync_request 1/ change the return value (which is number-of-sectors synced) from 'int' to 'sector_t'. The number of sectors is usually easily small enough to fit in an int, but if resync needs to abort, it may want to return the total number of remaining sectors, which could be large. Also errors cannot be returned as negative numbers now, so use 0 instead 2/ Add a 'skipped' return parameter to allow the array to report that it skipped the sectors. This allows md to take this into account in the speed calculations. Currently there is no important skipping, but the bitmap-based-resync that is coming will use this. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:13 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: allow a maximum extent to be set for resyncing This allows userspace to control resync/reshape progress and synchronise it with other activities, such as shared access in a SAN, or backing up critical sections during a tricky reshape. Writing a number of sectors (which must be a multiple of the chunk size if such is meaningful) causes a resync to pause when it gets to that point. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 01:39:52 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
raid1/raid10: slow down resync if there is non-resync activity pending A performance drop of mkfs has been observed on RAID10 during resync since commit 09314799e4f0 ("md: remove 'go_faster' option from ->sync_request()"). Resync sends so many IOs it slows down non-resync IOs significantly (few times). Add a short delay to a resync. The previous long sleep (1s) has proven unnecessary, even very short delay brings performance right. The change also applied to raid1. The problem has not been observed on raid1, however it shares barriers code with raid10 so it might be an issue for some setup too. Suggested-by: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20160609134555.GA9104@proton.igk.intel.com Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-13 15:51:19 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: store a block_device pointer in struct bio Replace the gendisk pointer in struct bio with a pointer to the newly improved struct block device. From that the gendisk can be trivially accessed with an extra indirection, but it also allows to directly look up all information related to partition remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24 11:02:34 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: Fix raid10 replace hang when new added disk faulty [Symptom] Resync thread hang when new added disk faulty during replacing. [Root Cause] In raid10_sync_request(), we expect to issue a bio with callback end_sync_read(), and a bio with callback end_sync_write(). In normal situation, we will add resyncing sectors into mddev->recovery_active when raid10_sync_request() returned, and sub resynced sectors from mddev->recovery_active when end_sync_write() calls end_sync_request(). If new added disk, which are replacing the old disk, is set faulty, there is a race condition: 1. In the first rcu protected section, resync thread did not detect that mreplace is set faulty and pass the condition. 2. In the second rcu protected section, mreplace is set faulty. 3. But, resync thread will prepare the read object first, and then check the write condition. 4. It will find that mreplace is set faulty and do not have to prepare write object. This cause we add resync sectors but never sub it. [How to Reproduce] This issue can be easily reproduced by the following steps: mdadm -C /dev/md0 --assume-clean -l 10 -n 4 /dev/sd[abcd] mdadm /dev/md0 -a /dev/sde mdadm /dev/md0 --replace /dev/sdd sleep 1 mdadm /dev/md0 -f /dev/sde [How to Fix] This issue can be fixed by using local variables to record the result of test conditions. Once the conditions are satisfied, we can make sure that we need to issue a bio for read and a bio for write. Previous 'commit 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")' will also check whether bio is NULL, but leave the comment saying that it is a pointless test. So we remove this dummy check. Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Allen Peng <allenpeng@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Alex Wu <alexwu@synology.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-09-21 16:05:03 +08:00
MD RAID10: rename mirror_info structure MD RAID10: Rename the structure 'mirror_info' to 'raid10_info' The same structure name ('mirror_info') is used by raid1. Each of these structures are defined in there respective header files. If dm-raid is to support both RAID1 and RAID10, the header files will be included and the structure names must not collide. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: Fix raid10 replace hang when new added disk faulty [Symptom] Resync thread hang when new added disk faulty during replacing. [Root Cause] In raid10_sync_request(), we expect to issue a bio with callback end_sync_read(), and a bio with callback end_sync_write(). In normal situation, we will add resyncing sectors into mddev->recovery_active when raid10_sync_request() returned, and sub resynced sectors from mddev->recovery_active when end_sync_write() calls end_sync_request(). If new added disk, which are replacing the old disk, is set faulty, there is a race condition: 1. In the first rcu protected section, resync thread did not detect that mreplace is set faulty and pass the condition. 2. In the second rcu protected section, mreplace is set faulty. 3. But, resync thread will prepare the read object first, and then check the write condition. 4. It will find that mreplace is set faulty and do not have to prepare write object. This cause we add resync sectors but never sub it. [How to Reproduce] This issue can be easily reproduced by the following steps: mdadm -C /dev/md0 --assume-clean -l 10 -n 4 /dev/sd[abcd] mdadm /dev/md0 -a /dev/sde mdadm /dev/md0 --replace /dev/sdd sleep 1 mdadm /dev/md0 -f /dev/sde [How to Fix] This issue can be fixed by using local variables to record the result of test conditions. Once the conditions are satisfied, we can make sure that we need to issue a bio for read and a bio for write. Previous 'commit 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")' will also check whether bio is NULL, but leave the comment saying that it is a pointless test. So we remove this dummy check. Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Allen Peng <allenpeng@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Alex Wu <alexwu@synology.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-09-21 16:05:03 +08:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: Don't try to recovery unmatched (and unused) chunks. If a RAID10 has an odd number of chunks - as might happen when there are an odd number of devices - the last chunk has no pair and so is not mirrored. We don't store data there, but when recovering the last device in an array we retry to recover that last chunk from a non-existent location. This results in an error, and the recovery aborts. When we get to that last chunk we should just stop - there is nothing more to do anyway. This bug has been present since the introduction of RAID10, so the patch is appropriate for any -stable kernel. Cc: stable@vger.kernel.org Reported-by: Christian Balzer <chibi@gol.com> Tested-by: Christian Balzer <chibi@gol.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 10:37:30 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: Don't try to recovery unmatched (and unused) chunks. If a RAID10 has an odd number of chunks - as might happen when there are an odd number of devices - the last chunk has no pair and so is not mirrored. We don't store data there, but when recovering the last device in an array we retry to recover that last chunk from a non-existent location. This results in an error, and the recovery aborts. When we get to that last chunk we should just stop - there is nothing more to do anyway. This bug has been present since the introduction of RAID10, so the patch is appropriate for any -stable kernel. Cc: stable@vger.kernel.org Reported-by: Christian Balzer <chibi@gol.com> Tested-by: Christian Balzer <chibi@gol.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 10:37:30 +10:00
md: be extra careful not to take a reference to a Faulty device. It is important that we never increment rdev->nr_pending on a Faulty device as ->hot_remove_disk() assumes that once the Faulty flag is visible no code will take a new reference. Some places take a new reference after only check In_sync. This should be safe as the two are changed together. However to make the code more obviously safe, add checks for 'Faulty' as well. Note: the actual rule is: Never increment nr_pending if Faulty is set and Blocked is clear, never clear Faulty, and never set Blocked without holding a reference through nr_pending. fix build error (Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:53 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid1/10: reset bio allocated from mempool Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-24 17:50:40 -07:00
md/raid10: always initialise ->state on newly allocated r10_bio Most places which allocate an r10_bio zero the ->state, some don't. As the r10_bio comes from a mempool, and the allocation function uses kzalloc it is often zero anyway. But sometimes it isn't and it is best to be safe. I only noticed this because of the bug fixed by an earlier patch where the r10_bios allocated for a reshape were left around to be used by a subsequent resync. In that case the R10BIO_IsReshape flag caused problems. Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-18 14:38:45 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: don't clear bitmap during recovery if array will still be degraded. If we have a raid10 with multiple missing devices, and we recover just one of these to a spare, then we risk (depending on the bitmap and array chunk size) clearing bits of the bitmap for which recovery isn't complete (because a device is still missing). This can lead to a subsequent "re-add" being recovered without any IO happening, which would result in loss of data. This patch takes the safe approach of not clearing bitmap bits if the array will still be degraded. This patch is suitable for all active -stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:48:10 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
[PATCH] md: fix BUG when raid10 rebuilds without enough drives This shouldn't be a BUG. We should cope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:24:04 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: avoid reading known bad blocks during resync/recovery. During resync/recovery limit the size of the request to avoid reading into a bad block that does not start at-or-before the current read address. Similarly if there is a bad block at this address, don't allow the current request to extend beyond the end of that bad block. Now that we don't ever read from known bad blocks, it is safe to allow devices with those blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: avoid reading known bad blocks during resync/recovery. During resync/recovery limit the size of the request to avoid reading into a bad block that does not start at-or-before the current read address. Similarly if there is a bad block at this address, don't allow the current request to extend beyond the end of that bad block. Now that we don't ever read from known bad blocks, it is safe to allow devices with those blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: Handle read errors during recovery better. Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: Fix raid10 replace hang when new added disk faulty [Symptom] Resync thread hang when new added disk faulty during replacing. [Root Cause] In raid10_sync_request(), we expect to issue a bio with callback end_sync_read(), and a bio with callback end_sync_write(). In normal situation, we will add resyncing sectors into mddev->recovery_active when raid10_sync_request() returned, and sub resynced sectors from mddev->recovery_active when end_sync_write() calls end_sync_request(). If new added disk, which are replacing the old disk, is set faulty, there is a race condition: 1. In the first rcu protected section, resync thread did not detect that mreplace is set faulty and pass the condition. 2. In the second rcu protected section, mreplace is set faulty. 3. But, resync thread will prepare the read object first, and then check the write condition. 4. It will find that mreplace is set faulty and do not have to prepare write object. This cause we add resync sectors but never sub it. [How to Reproduce] This issue can be easily reproduced by the following steps: mdadm -C /dev/md0 --assume-clean -l 10 -n 4 /dev/sd[abcd] mdadm /dev/md0 -a /dev/sde mdadm /dev/md0 --replace /dev/sdd sleep 1 mdadm /dev/md0 -f /dev/sde [How to Fix] This issue can be fixed by using local variables to record the result of test conditions. Once the conditions are satisfied, we can make sure that we need to issue a bio for read and a bio for write. Previous 'commit 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")' will also check whether bio is NULL, but leave the comment saying that it is a pointless test. So we remove this dummy check. Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Allen Peng <allenpeng@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Alex Wu <alexwu@synology.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-09-21 16:05:03 +08:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Fix raid10 replace hang when new added disk faulty [Symptom] Resync thread hang when new added disk faulty during replacing. [Root Cause] In raid10_sync_request(), we expect to issue a bio with callback end_sync_read(), and a bio with callback end_sync_write(). In normal situation, we will add resyncing sectors into mddev->recovery_active when raid10_sync_request() returned, and sub resynced sectors from mddev->recovery_active when end_sync_write() calls end_sync_request(). If new added disk, which are replacing the old disk, is set faulty, there is a race condition: 1. In the first rcu protected section, resync thread did not detect that mreplace is set faulty and pass the condition. 2. In the second rcu protected section, mreplace is set faulty. 3. But, resync thread will prepare the read object first, and then check the write condition. 4. It will find that mreplace is set faulty and do not have to prepare write object. This cause we add resync sectors but never sub it. [How to Reproduce] This issue can be easily reproduced by the following steps: mdadm -C /dev/md0 --assume-clean -l 10 -n 4 /dev/sd[abcd] mdadm /dev/md0 -a /dev/sde mdadm /dev/md0 --replace /dev/sdd sleep 1 mdadm /dev/md0 -f /dev/sde [How to Fix] This issue can be fixed by using local variables to record the result of test conditions. Once the conditions are satisfied, we can make sure that we need to issue a bio for read and a bio for write. Previous 'commit 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")' will also check whether bio is NULL, but leave the comment saying that it is a pointless test. So we remove this dummy check. Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Allen Peng <allenpeng@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Alex Wu <alexwu@synology.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-09-21 16:05:03 +08:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: Fix raid10 replace hang when new added disk faulty [Symptom] Resync thread hang when new added disk faulty during replacing. [Root Cause] In raid10_sync_request(), we expect to issue a bio with callback end_sync_read(), and a bio with callback end_sync_write(). In normal situation, we will add resyncing sectors into mddev->recovery_active when raid10_sync_request() returned, and sub resynced sectors from mddev->recovery_active when end_sync_write() calls end_sync_request(). If new added disk, which are replacing the old disk, is set faulty, there is a race condition: 1. In the first rcu protected section, resync thread did not detect that mreplace is set faulty and pass the condition. 2. In the second rcu protected section, mreplace is set faulty. 3. But, resync thread will prepare the read object first, and then check the write condition. 4. It will find that mreplace is set faulty and do not have to prepare write object. This cause we add resync sectors but never sub it. [How to Reproduce] This issue can be easily reproduced by the following steps: mdadm -C /dev/md0 --assume-clean -l 10 -n 4 /dev/sd[abcd] mdadm /dev/md0 -a /dev/sde mdadm /dev/md0 --replace /dev/sdd sleep 1 mdadm /dev/md0 -f /dev/sde [How to Fix] This issue can be fixed by using local variables to record the result of test conditions. Once the conditions are satisfied, we can make sure that we need to issue a bio for read and a bio for write. Previous 'commit 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")' will also check whether bio is NULL, but leave the comment saying that it is a pointless test. So we remove this dummy check. Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Allen Peng <allenpeng@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Alex Wu <alexwu@synology.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-09-21 16:05:03 +08:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: handle recovery of replacement devices. If there is a replacement device, then recover to it, reading from any drives - maybe the one being replaced, maybe not. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: fix bug when raid10 recovery fails to recover a block. commit e875ecea266a543e643b19e44cf472f1412708f9 md/raid10 record bad blocks as needed during recovery. added code to the "cannot recover this block" path to record a bad block rather than fail the whole recovery. Unfortunately this new case was placed *after* r10bio was freed rather than *before*, yet it still uses r10bio. This is will crash with a null dereference. So move the freeing of r10bio down where it is safe. Cc: stable@vger.kernel.org (v3.1+) Fixes: e875ecea266a543e643b19e44cf472f1412708f9 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-06 10:35:34 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md-cluster: Use a small window for raid10 resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window is maintained in r10conf as cluster_sync_low and cluster_sync_high, and processed in raid10's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Set cluster_sync_high to cluster_sync_low + stripe size. 3. Send a message to all nodes so they may add it in their suspension list. Note: We only support "near" raid10 so far, resync a far or offset raid10 array could have trouble. So raid10_run checks the layout of clustered raid10, it will refuse to run if the layout is not correct. With the "near" layout we process one stripe at a time progressing monotonically through the address space. So we can have a sliding window of whole-stripes which moves through the array suspending IO on other nodes, and both resync which uses array addresses and recovery which uses device addresses can stay within this window. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:52 +08:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md/raid10: Don't call bitmap_cond_end_sync when we are doing recovery. For raid1/4/5/6, resync (fixing inconsistencies between devices) is very similar to recovery (rebuilding a failed device onto a spare). The both walk through the device addresses in order. For raid10 it can be quite different. resync follows the 'array' address, and makes sure all copies are the same. Recover walks through 'device' addresses and recreates each missing block. The 'bitmap_cond_end_sync' function allows the write-intent-bitmap (When present) to be updated to reflect a partially completed resync. It makes assumptions which mean that it does not work correctly for raid10 recovery at all. In particularly, it can cause bitmap-directed recovery of a raid10 to not recovery some of the blocks that need to be recovered. So move the call to bitmap_cond_end_sync into the resync path, rather than being in the common "resync or recovery" path. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-25 13:18:47 +11:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid1/10: reset bio allocated from mempool Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-24 17:50:40 -07:00
md/raid10: always initialise ->state on newly allocated r10_bio Most places which allocate an r10_bio zero the ->state, some don't. As the r10_bio comes from a mempool, and the allocation function uses kzalloc it is often zero anyway. But sometimes it isn't and it is best to be safe. I only noticed this because of the bug fixed by an earlier patch where the r10_bios allocated for a reshape were left around to be used by a subsequent resync. In that case the R10BIO_IsReshape flag caused problems. Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-18 14:38:45 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: avoid reading known bad blocks during resync/recovery. During resync/recovery limit the size of the request to avoid reading into a bad block that does not start at-or-before the current read address. Similarly if there is a bad block at this address, don't allow the current request to extend beyond the end of that bad block. Now that we don't ever read from known bad blocks, it is safe to allow devices with those blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: avoid reading known bad blocks during resync/recovery. During resync/recovery limit the size of the request to avoid reading into a bad block that does not start at-or-before the current read address. Similarly if there is a bad block at this address, don't allow the current request to extend beyond the end of that bad block. Now that we don't ever read from known bad blocks, it is safe to allow devices with those blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: avoid reading known bad blocks during resync/recovery. During resync/recovery limit the size of the request to avoid reading into a bad block that does not start at-or-before the current read address. Similarly if there is a bad block at this address, don't allow the current request to extend beyond the end of that bad block. Now that we don't ever read from known bad blocks, it is safe to allow devices with those blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: avoid reading known bad blocks during resync/recovery. During resync/recovery limit the size of the request to avoid reading into a bad block that does not start at-or-before the current read address. Similarly if there is a bad block at this address, don't allow the current request to extend beyond the end of that bad block. Now that we don't ever read from known bad blocks, it is safe to allow devices with those blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: use correct limit variable Clang complains that we are assigning a variable to itself. This should be using bad_sectors like the similar earlier check does. Bug has been present since 3.1-rc1. It is minor but could conceivably cause corruption or other bad behaviour. Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 14:20:58 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: avoid reading known bad blocks during resync/recovery. During resync/recovery limit the size of the request to avoid reading into a bad block that does not start at-or-before the current read address. Similarly if there is a bad block at this address, don't allow the current request to extend beyond the end of that bad block. Now that we don't ever read from known bad blocks, it is safe to allow devices with those blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
md/raid10: fix FailFast test for wrong device We need to test FailFast flag for replacement device here since the set up for writing is for the replacement, so we need fix it like: - if (test_bit(FailFast, &conf->mirrors[d].rdev->flags)) + if (test_bit(FailFast, &conf->mirrors[d].replacement->flags)) Since commit f90145f317ef ("md/raid10: add rcu protection to rdev access in raid10_sync_request.") had added the rcu protection for the part, so let's extend the range protected by rcu and use rdev directly. Fixes: 1919cbb ("md/raid10: add failfast handling for writes.") Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-13 11:16:08 +08:00
md/raid10: add failfast handling for reads. If a device is marked FailFast, and it is not the only device we can read from, we mark the bio as MD_FAILFAST. If this does fail-fast, we don't try read repair but just allow failure. If it was the last device, it doesn't get marked Faulty so the retry happens on the same device - this time without FAILFAST. A subsequent failure will not retry but will just pass up the error. During resync we may use FAILFAST requests, and on a failure we will simply use the other device(s). During recovery we will only use FAILFAST in the unusual case were there are multiple places to read from - i.e. if there are > 2 devices. If we get a failure we will fail the device and complete the resync/recovery with remaining devices. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
md/raid10: fix FailFast test for wrong device We need to test FailFast flag for replacement device here since the set up for writing is for the replacement, so we need fix it like: - if (test_bit(FailFast, &conf->mirrors[d].rdev->flags)) + if (test_bit(FailFast, &conf->mirrors[d].replacement->flags)) Since commit f90145f317ef ("md/raid10: add rcu protection to rdev access in raid10_sync_request.") had added the rcu protection for the part, so let's extend the range protected by rcu and use rdev directly. Fixes: 1919cbb ("md/raid10: add failfast handling for writes.") Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-13 11:16:08 +08:00
md/raid10: add failfast handling for writes. When writing to a fastfail device, we use MD_FASTFAIL unless it is the only device being written to. For resync/recovery, assume there was a working device to read from so always use MD_FASTFAIL. If a write for resync/recovery fails, we just fail the device - there is not much else to do. If a normal write fails, but the device cannot be marked Faulty (must be only one left), we queue for write error handling which calls narrow_write_error() to write the block synchronously without any failfast flags. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:12 +11:00
md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: fix FailFast test for wrong device We need to test FailFast flag for replacement device here since the set up for writing is for the replacement, so we need fix it like: - if (test_bit(FailFast, &conf->mirrors[d].rdev->flags)) + if (test_bit(FailFast, &conf->mirrors[d].replacement->flags)) Since commit f90145f317ef ("md/raid10: add rcu protection to rdev access in raid10_sync_request.") had added the rcu protection for the part, so let's extend the range protected by rcu and use rdev directly. Fixes: 1919cbb ("md/raid10: add failfast handling for writes.") Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-13 11:16:08 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: reformat some loops with less indenting. When a loop ends with an 'if' with a large body, it is neater to make the if 'continue' on the inverse condition, and then the body is indented less. Apply this pattern 3 times, and wrap some other long lines. Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
md/raid10: Handle replacement devices during resync. If we need to resync an array which has replacement devices, we always write any block checked to every replacement. If the resync was bitmap-based resync we will then complete the replacement normally. If it was a full resync, we mark the replacements as fully recovered when the resync finishes so no further recovery is needed. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md: remove 'idx' from 'struct resync_pages' bio_add_page() won't fail for resync bio, and the page index for each bio is same, so remove it. More importantly the 'idx' of 'struct resync_pages' is initialized in mempool allocator function, the current way is wrong since mempool is only responsible for allocation, we can't use that for initialization. Suggested-by: NeilBrown <neilb@suse.com> Reported-by: NeilBrown <neilb@suse.com> Reported-and-tested-by: Patrick <dto@gmx.net> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-14 16:14:42 +08:00
md: raid1/raid10: don't handle failure of bio_add_page() All bio_add_page() is for adding one page into resync bio, which is big enough to hold RESYNC_PAGES pages, and the current bio_add_page() doesn't check queue limit any more, so it won't fail at all. remove unused label (shaohua) Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:22 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove 'idx' from 'struct resync_pages' bio_add_page() won't fail for resync bio, and the page index for each bio is same, so remove it. More importantly the 'idx' of 'struct resync_pages' is initialized in mempool allocator function, the current way is wrong since mempool is only responsible for allocation, we can't use that for initialization. Suggested-by: NeilBrown <neilb@suse.com> Reported-by: NeilBrown <neilb@suse.com> Reported-and-tested-by: Patrick <dto@gmx.net> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-14 16:14:42 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md-cluster: Use a small window for raid10 resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window is maintained in r10conf as cluster_sync_low and cluster_sync_high, and processed in raid10's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Set cluster_sync_high to cluster_sync_low + stripe size. 3. Send a message to all nodes so they may add it in their suspension list. Note: We only support "near" raid10 so far, resync a far or offset raid10 array could have trouble. So raid10_run checks the layout of clustered raid10, it will refuse to run if the layout is not correct. With the "near" layout we process one stripe at a time progressing monotonically through the address space. So we can have a sliding window of whole-stripes which moves through the array suspending IO on other nodes, and both resync which uses array addresses and recovery which uses device addresses can stay within this window. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: improve the interface to sync_request 1/ change the return value (which is number-of-sectors synced) from 'int' to 'sector_t'. The number of sectors is usually easily small enough to fit in an int, but if resync needs to abort, it may want to return the total number of remaining sectors, which could be large. Also errors cannot be returned as negative numbers now, so use 0 instead 2/ Add a 'skipped' return parameter to allow the array to report that it skipped the sectors. This allows md to take this into account in the speed calculations. Currently there is no important skipping, but the bitmap-based-resync that is coming will use this. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:13 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10 record bad blocks as needed during recovery. When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Don't skip more than 1 bitmap-chunk at a time during recovery. When doing recovery on a raid10 with a write-intent bitmap, we only need to recovery chunks that are flagged in the bitmap. However if we choose to skip a chunk as it isn't flag, the code currently skips the whole raid10-chunk, thus it might not recovery some blocks that need recovering. This patch fixes it. In case that is confusing, it might help to understand that there is a 'raid10 chunk size' which guides how data is distributed across the devices, and a 'bitmap chunk size' which says how much data corresponds to a single bit in the bitmap. This bug only affects cases where the bitmap chunk size is smaller than the raid10 chunk size. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-25 13:18:47 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17 10:08:45 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17 10:08:45 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17 10:08:45 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17 10:08:45 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17 10:08:45 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17 10:08:45 +10:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: split out interpretation of layout to separate function. We will soon be interpreting the layout (and chunksize etc) from multiple places to support reshape. So split it out into separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: fix the 'new' raid10 layout to work correctly. In Linux 3.9 we introduce a new 'far' layout for RAID10 which was supposed to rotate the replicas differently and so provide better resilience. In particular it could survive more combinations of 2 drive failures. Unfortunately. due to a coding error, this some did what was wanted, sometimes improved less than we hoped, and sometimes - in very unlikely circumstances - put multiple replicas on the same device so the redundancy was harmed. No public user-space tool has created arrays using this layout so it is very unlikely that zero-redundancy arrays actually exist. Probably no arrays using any form of the new layout exist. But we cannot be certain. So use another bit in the 'layout' number and introduce a bug-fixed version of the layout. Also when assembling an array, if it has a zero-redundancy layout, give a warning. Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-22 13:20:15 +11:00
md/raid10: split out interpretation of layout to separate function. We will soon be interpreting the layout (and chunksize etc) from multiple places to support reshape. So split it out into separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: fix the 'new' raid10 layout to work correctly. In Linux 3.9 we introduce a new 'far' layout for RAID10 which was supposed to rotate the replicas differently and so provide better resilience. In particular it could survive more combinations of 2 drive failures. Unfortunately. due to a coding error, this some did what was wanted, sometimes improved less than we hoped, and sometimes - in very unlikely circumstances - put multiple replicas on the same device so the redundancy was harmed. No public user-space tool has created arrays using this layout so it is very unlikely that zero-redundancy arrays actually exist. Probably no arrays using any form of the new layout exist. But we cannot be certain. So use another bit in the 'layout' number and introduce a bug-fixed version of the layout. Also when assembling an array, if it has a zero-redundancy layout, give a warning. Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-22 13:20:15 +11:00
md/raid10: split out interpretation of layout to separate function. We will soon be interpreting the layout (and chunksize etc) from multiple places to support reshape. So split it out into separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: split out interpretation of layout to separate function. We will soon be interpreting the layout (and chunksize etc) from multiple places to support reshape. So split it out into separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: split out interpretation of layout to separate function. We will soon be interpreting the layout (and chunksize etc) from multiple places to support reshape. So split it out into separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:36 -08:00
md/raid10: split out interpretation of layout to separate function. We will soon be interpreting the layout (and chunksize etc) from multiple places to support reshape. So split it out into separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 14:03:40 -07:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
[PATCH] md: auto-correct correctable read errors in raid10 Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:28 -08:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: split out interpretation of layout to separate function. We will soon be interpreting the layout (and chunksize etc) from multiple places to support reshape. So split it out into separate function. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
drivers: md: Unify common definitions of raid1 and raid10 These definitions are being moved to raid1-10.c. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:04 -07:00
md: raid1-10: Unify r{1,10}bio_pool_free Avoiding duplicated code, since they just execute a kfree. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:10 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md/raid10: simplify the splitting of requests. raid10 splits requests in two different ways for two different reasons. First, bio_split() is used to ensure the bio fits with a chunk. Second, multiple r10bio structures are allocated to represent the different sections that need to go to different devices, to avoid known bad blocks. This can be simplified to just use bio_split() once, and not to use multiple r10bios. We delay the split until we know a maximum bio size that can be handled with a single r10bio, and then split the bio and queue the remainder for later handling. As with raid1, we allocate a new bio_set to help with the splitting. It is not correct to use fs_bio_set in a device driver. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 14:05:51 +10:00
md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17 10:08:45 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: always set reshape_safe when initializing reshape_position. 'reshape_position' tracks where in the reshape we have reached. 'reshape_safe' tracks where in the reshape we have safely recorded in the metadata. These are compared to determine when to update the metadata. So it is important that reshape_safe is initialised properly. Currently it isn't. When starting a reshape from the beginning it usually has the correct value by luck. But when reducing the number of devices in a RAID10, it has the wrong value and this leads to the metadata not being updated correctly. This can lead to corruption if the reshape is not allowed to complete. This patch is suitable for any -stable kernel which supports RAID10 reshape, which is 3.5 and later. Fixes: 3ea7daa5d7fd ("md/raid10: add reshape support") Cc: stable@vger.kernel.org (v3.5+ please wait for -final to be out for 2 weeks) Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-06 17:37:49 +10:00
Remove blkdev warning triggered by using md As setting and clearing queue flags now requires that we hold a spinlock on the queue, and as blk_queue_stack_limits is called without that lock, get the lock inside blk_queue_stack_limits. For blk_queue_stack_limits to be able to find the right lock, each md personality needs to set q->queue_lock to point to the appropriate lock. Those personalities which didn't previously use a spin_lock, us q->__queue_lock. So always initialise that lock when allocated. With this in place, setting/clearing of the QUEUE_FLAG_PLUGGED bit will no longer cause warnings as it will be clear that the proper lock is held. Thanks to Dan Williams for review and fixing the silly bugs. Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Nick Piggin <npiggin@suse.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Jacek Luczak <difrost.kernel@gmail.com> Cc: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 16:05:54 -07:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: ensure device failure recorded before write request returns. When a write to one of the legs of a RAID10 fails, the failure is recorded in the metadata of the other legs so that after a restart the data on the failed drive wont be trusted even if that drive seems to be working again (maybe a cable was unplugged). Currently there is no interlock between the write request completing and the metadata update. So it is possible that the write will complete, the app will confirm success in some way, and then the machine will crash before the metadata update completes. This is an extremely small hole for a racy to fit in, but it is theoretically possible and so should be closed. So: - set MD_CHANGE_PENDING when requesting a metadata update for a failed device, so we can know with certainty when it completes - queue requests that experienced an error on a new queue which is only processed after the metadata update completes - call raid_end_bio_io() on bios in that queue when the time comes. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-14 11:26:17 +10:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
raid10: improve random reads performance RAID10 random read performance is lower than expected due to excessive spinlock utilisation which is required mostly for rebuild/resync. Simplify allow_barrier as it's in IO path and encounters a lot of unnecessary congestion. As lower_barrier just takes a lock in order to decrement a counter, convert counter (nr_pending) into atomic variable and remove the spin lock. There is also a congestion for wake_up (it uses lock internally) so call it only when it's really needed. As wake_up is not called constantly anymore, ensure process waiting to raise a barrier is notified when there are no more waiting IOs. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-24 14:20:16 +02:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md: make 'name' arg to md_register_thread non-optional. Having the 'name' arg optional and defaulting to the current personality name is no necessary and leads to errors, as when changing the level of an array we can end up using the name of the old level instead of the new one. So make it non-optional and always explicitly pass the name of the level that the array will be. Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:56:52 +10:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: update the optimal I/O size on reshape The raid5 and raid10 drivers currently update the read-ahead size, but not the optimal I/O size on reshape. To prepare for deriving the read-ahead size from the optimal I/O size make sure it is updated as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24 08:51:33 +02:00
MD: rename some functions These short function names are hard to search. Rename them to make vim happy. Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-20 13:52:20 -08:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: update the optimal I/O size on reshape The raid5 and raid10 drivers currently update the read-ahead size, but not the optimal I/O size on reshape. To prepare for deriving the read-ahead size from the optimal I/O size make sure it is updated as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24 08:51:33 +02:00
MD RAID10: rename mirror_info structure MD RAID10: Rename the structure 'mirror_info' to 'raid10_info' The same structure name ('mirror_info') is used by raid1. Each of these structures are defined in there respective header files. If dm-raid is to support both RAID1 and RAID10, the header files will be included and the structure names must not collide. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: initialise ->writes_pending in personality modules. The new per-cpu counter for writes_pending is initialised in md_alloc(), which is not called by dm-raid. So dm-raid fails when md_write_start() is called. Move the initialization to the personality modules that need it. This way it is always initialised when needed, but isn't unnecessarily initialized (requiring memory allocation) when the personality doesn't use writes_pending. Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 16:05:13 +10:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md-cluster: Use a small window for raid10 resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window is maintained in r10conf as cluster_sync_low and cluster_sync_high, and processed in raid10's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Set cluster_sync_high to cluster_sync_low + stripe size. 3. Send a message to all nodes so they may add it in their suspension list. Note: We only support "near" raid10 so far, resync a far or offset raid10 array could have trouble. So raid10_run checks the layout of clustered raid10, it will refuse to run if the layout is not correct. With the "near" layout we process one stripe at a time progressing monotonically through the address space. So we can have a sliding window of whole-stripes which moves through the array suspending IO on other nodes, and both resync which uses array addresses and recovery which uses device addresses can stay within this window. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:52 +08:00
md-cluster: choose correct label when clustered layout is not supported r10conf is already successfully allocated before checking the layout Signed-off-by: Lidong Zhong <lzhong@suse.com> Reviewed-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-01-23 23:06:12 +08:00
md-cluster: Use a small window for raid10 resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window is maintained in r10conf as cluster_sync_low and cluster_sync_high, and processed in raid10's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Set cluster_sync_high to cluster_sync_low + stripe size. 3. Send a message to all nodes so they may add it in their suspension list. Note: We only support "near" raid10 so far, resync a far or offset raid10 array could have trouble. So raid10_run checks the layout of clustered raid10, it will refuse to run if the layout is not correct. With the "near" layout we process one stripe at a time progressing monotonically through the address space. So we can have a sliding window of whole-stripes which moves through the array suspending IO on other nodes, and both resync which uses array addresses and recovery which uses device addresses can stay within this window. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-24 15:11:52 +08:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
MD RAID10: Export md_raid10_congested md/raid10: Export is_congested test. In similar fashion to commits 11d8a6e3719519fbc0e2c9d61b6fa931b84bf813 1ed7242e591af7e233234d483f12d33818b189d9 we export the RAID10 congestion checking function so that dm-raid.c can make use of it and make use of the personality. The 'queue' and 'gendisk' structures will not be available to the MD code when device-mapper sets up the device, so we conditionalize access to these fields also. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
md: support REQ_OP_WRITE_ZEROES Copy & paste from the REQ_OP_WRITE_SAME code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 19:21:03 +02:00
md: update the optimal I/O size on reshape The raid5 and raid10 drivers currently update the read-ahead size, but not the optimal I/O size on reshape. To prepare for deriving the read-ahead size from the optimal I/O size make sure it is updated as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24 08:51:33 +02:00
MD RAID10: Export md_raid10_congested md/raid10: Export is_congested test. In similar fashion to commits 11d8a6e3719519fbc0e2c9d61b6fa931b84bf813 1ed7242e591af7e233234d483f12d33818b189d9 we export the RAID10 congestion checking function so that dm-raid.c can make use of it and make use of the personality. The 'queue' and 'gendisk' structures will not be available to the MD code when device-mapper sets up the device, so we conditionalize access to these fields also. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
md: Use new topology calls to indicate alignment and I/O sizes Switch MD over to the new disk_stack_limits() function which checks for aligment and adjusts preferred I/O sizes when stacking. Also indicate preferred I/O sizes where applicable. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-07-01 11:13:45 +10:00
md: tidy up rdev_for_each usage. md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: don't allow arrays to contain devices with bad blocks. As no personality understand bad block lists yet, we must reject any device that is known to contain bad blocks. As the personalities get taught, these tests can be removed. This only applies to raid1/raid5/raid10. For linear/raid0/multipath/faulty the whole concept of bad blocks doesn't mean anything so there is no point adding the checks. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
2011-07-28 11:31:47 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: recognise replacements when assembling array. If a Replacement is seen, file it as such. If we see two replacements (or two normal devices) for the one slot, abort. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: recognise replacements when assembling array. If a Replacement is seen, file it as such. If we see two replacements (or two normal devices) for the one slot, abort. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
MD RAID10: Export md_raid10_congested md/raid10: Export is_congested test. In similar fashion to commits 11d8a6e3719519fbc0e2c9d61b6fa931b84bf813 1ed7242e591af7e233234d483f12d33818b189d9 we export the RAID10 congestion checking function so that dm-raid.c can make use of it and make use of the personality. The 'queue' and 'gendisk' structures will not be available to the MD code when device-mapper sets up the device, so we conditionalize access to these fields also. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: reset the 'first' at the end of loop We need to set "first = 0' at the end of rdev_for_each loop, so we can get the array's min_offset_diff correctly otherwise min_offset_diff just means the last rdev's offset diff. Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-06 09:12:18 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
[PATCH] md: fix raid10 assembly when too many devices are missing If you try to assemble an array with too many missing devices, raid10 will now reject the attempt, instead of allowing it. Also check when hot-adding a drive and refuse the hot-add if the array is beyond hope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:24:03 -07:00
md/raid10: Improve decision on whether to fail a device with a read error. Normally we would fail a device with a READ error. However if doing so causes the array to fail, it is better to leave the device in place and just return the read error to the caller. The current test for decide if the array will fail is overly simplistic. We have a function 'enough' which can tell if the array is failed or not, so use it to guide the decision. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
[PATCH] md: fix raid10 assembly when too many devices are missing If you try to assemble an array with too many missing devices, raid10 will now reject the attempt, instead of allowing it. Also check when hot-adding a drive and refuse the hot-add if the array is beyond hope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:24:03 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: fix two bugs affecting RAID10 reshape. 1/ If a RAID10 is being reshaped to a fewer number of devices and is stopped while this is ongoing, then when the array is reassembled the 'mirrors' array will be allocated too small. This will lead to an access error or memory corruption. 2/ A sanity test for a reshaping RAID10 array is restarted is slightly incorrect. Due to the first bug, this is suitable for any -stable kernel since 3.5 where this code was introduced. Cc: stable@vger.kernel.org (v3.5+) Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-02 15:58:05 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: recognise replacements when assembling array. If a Replacement is seen, file it as such. If we see two replacements (or two normal devices) for the one slot, abort. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
[PATCH] md: allow checkpoint of recovery with version-1 superblock For a while we have had checkpointing of resync. The version-1 superblock allows recovery to be checkpointed as well, and this patch implements that. Due to early carelessness we need to add a feature flag to signal that the recovery_offset field is in use, otherwise older kernels would assume that a partially recovered array is in fact fully recovered. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:40 -07:00
[PATCH] md: fix calculation of ->degraded for multipath and raid10 Two less-used md personalities have bugs in the calculation of ->degraded (the extent to which the array is degraded). Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21 10:24:07 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: avoid fullsync when not necessary. This is the raid10 equivalent of commit 4f0a5e012cf41321d611e7cad63e1017d143d138 MD RAID1: Further conditionalize 'fullsync' If a device in a newly assembled array is not fully recovered we currently do a fully resync by don't need to. Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14 16:30:10 +11:00
Ensure interrupted recovery completed properly (v1 metadata plus bitmap) If, while assembling an array, we find a device which is not fully in-sync with the array, it is important to set the "fullsync" flags. This is an exact analog to the setting of this flag in hot_add_disk methods. Currently, only v1.x metadata supports having devices in an array which are not fully in-sync (it keep track of how in sync they are). The 'fullsync' flag only makes a difference when a write-intent bitmap is being used. In this case it tells recovery to ignore the bitmap and recovery all blocks. This fix is already in place for raid1, but not raid5/6 or raid10. So without this fix, a raid1 ir raid4/5/6 array with version 1.x metadata and a write intent bitmaps, that is stopped in the middle of a recovery, will appear to complete the recovery instantly after it is reassembled, but the recovery will not be correct. If you might have an array like that, issueing echo repair > /sys/block/mdXX/md/sync_action will make sure recovery completes properly. Cc: <stable@kernel.org> Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:30:52 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10: fix that replacement cannot complete recovery after reassemble During assemble, the spare marked for replacement is not checked. conf->fullsync cannot be updated to be 1. As a result, recovery will treat it as a clean array. All recovering sectors are skipped. Original device is replaced with the not-recovered spare. mdadm -C /dev/md0 -l10 -n4 -pn2 /dev/loop[0123] mdadm /dev/md0 -a /dev/loop4 mdadm /dev/md0 --replace /dev/loop0 mdadm -S /dev/md0 # stop array during recovery mdadm -A /dev/md0 /dev/loop[01234] After reassemble, you can see recovery go on, but it completes immediately. In fact, recovery is not actually processed. To solve this problem, we just add the missing logics for replacment spares. (In raid1.c or raid5.c, they have already been checked.) Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-06-28 18:40:11 +08:00
md: Fix some bugs in recovery_disabled handling. In 3.0 we changed the way recovery_disabled was handle so that instead of testing against zero, we test an mddev-> value against a conf-> value. Two problems: 1/ one place in raid1 was missed and still sets to '1'. 2/ We didn't explicitly set the conf-> value at array creation time. It defaulted to '0' just like the mddev value does so they could appear equal and thus disable recovery. This did not affect normal 'md' as it calls bind_rdev_to_array which changes the mddev value. However the dmraid interface doesn't call this and so doesn't change ->recovery_disabled; so at array start all recovery is incorrectly disabled. So initialise the 'conf' value to one less that the mddev value, so the will only be the same when explicitly set that way. Reported-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-26 11:54:39 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Push down reconstruction log message to personality code. Currently, the md layer checks in analyze_sbs() if the raid level supports reconstruction (mddev->level >= 1) and if reconstruction is in progress (mddev->recovery_cp != MaxSector). Move that printk into the personality code of those raid levels that care (levels 1, 4, 5, 6, 10). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:48:06 +10:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: Use REQ_FAILFAST_* on metadata writes where appropriate This can only be supported on personalities which ensure that md_error() never causes an array to enter the 'failed' state. i.e. if marking a device Faulty would cause some data to be inaccessible, the device is status is left as non-Faulty. This is true for RAID1 and RAID10. If we get a failure writing metadata but the device doesn't fail, it must be the last device so we re-write without FAILFAST to improve chance of success. We also flag the device as LastDev so that future metadata updates don't waste time on failfast writes. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:11 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Require subsystems to explicitly allocate bio_set integrity mempool MD and DM create a new bio_set for every metadevice. Each bio_set has an integrity mempool attached regardless of whether the metadevice is capable of passing integrity metadata. This is a waste of memory. Instead we defer the allocation decision to MD and DM since we know at metadevice creation time whether integrity passthrough is needed or not. Automatic integrity mempool allocation can then be removed from bioset_create() and we make an explicit integrity allocation for the fs_bio_set. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Acked-by: Mike Snitzer <snizer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-17 11:11:05 +01:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: Fix failed allocation of md_register_thread mddev->sync_thread can be set to NULL on kzalloc failure downstream. The patch checks for such a scenario and frees allocated resources. Committer node: Added similar fix to raid5.c, as suggested by Guoqing. Cc: stable@vger.kernel.org # v3.16+ Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-03-04 16:48:54 -06:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Avoid waking up a thread after it has been freed. Two related problems: 1/ some error paths call "md_unregister_thread(mddev->thread)" without subsequently clearing ->thread. A subsequent call to mddev_unlock will try to wake the thread, and crash. 2/ Most calls to md_wakeup_thread are protected against the thread disappeared either by: - holding the ->mutex - having an active request, so something else must be keeping the array active. However mddev_unlock calls md_wakeup_thread after dropping the mutex and without any certainty of an active request, so the ->thread could theoretically disappear. So we need a spinlock to provide some protections. So change md_unregister_thread to take a pointer to the thread pointer, and ensure that it always does the required locking, and clears the pointer properly. Reported-by: "Moshe Melnikov" <moshe@zadarastorage.com> Signed-off-by: NeilBrown <neilb@suse.de> cc: stable@kernel.org
2011-09-21 15:30:20 +10:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
[PATCH] md: define and use safe_put_page for md md sometimes call put_page on NULL pointers (treating it like kfree). This is not safe, so define and use a 'safe_put_page' which checks for NULL. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:40 -08:00
[PATCH] md: remove unneeded NULL checks before kfree This patch removes some unneeded checks of pointers being NULL before calling kfree() on them. kfree() handles NULL pointers just fine, checking first is pointless. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:30 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: rename ->stop to ->free Now that the ->stop function only frees the private data, rename is accordingly. Also pass in the private pointer as an arg rather than using mddev->private. This flexibility will be useful in level_store(). Finally, don't clear ->private. It doesn't make sense to clear it seeing that isn't what we free, and it is no longer necessary to clear ->private (it was some time ago before ->to_remove was introduced). Setting ->to_remove in ->free() is a bit of a wart, but not a big problem at the moment. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:58 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: rename ->stop to ->free Now that the ->stop function only frees the private data, rename is accordingly. Also pass in the private pointer as an arg rather than using mddev->private. This flexibility will be useful in level_store(). Finally, don't clear ->private. It doesn't make sense to clear it seeing that isn't what we free, and it is no longer necessary to clear ->private (it was some time ago before ->to_remove was introduced). Setting ->to_remove in ->free() is a bit of a wart, but not a big problem at the moment. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:58 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md: raid1/raid10 md devices leak memory when stopping Hi. Raid1 and raid10 devices leak memory every time they stop. This is a patch for linux-3.9.0-rc7 to fix this problem. Thanks, Hirokazu Takahashi. Signed-off-by: Hirokazu Takahashi <taka@valinux.co.jp> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24 11:42:44 +10:00
[PATCH] md: remove unneeded NULL checks before kfree This patch removes some unneeded checks of pointers being NULL before calling kfree() on them. kfree() handles NULL pointers just fine, checking first is pointless. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:30 -07:00
md/raid10: another memory leak due to reshape. Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-23 20:19:26 +10:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove special meaning of ->quiesce(.., 2) The '2' argument means "wake up anything that is waiting". This is an inelegant part of the design and was added to help support management of suspend_lo/suspend_hi setting. Now that suspend_lo/hi is managed in mddev_suspend/resume, that need is gone. These is still a couple of places where we call 'quiesce' with an argument of '2', but they can safely be changed to call ->quiesce(.., 1); ->quiesce(.., 0) which achieve the same result at the small cost of pausing IO briefly. This removes a small "optimization" from suspend_{hi,lo}_store, but it isn't clear that optimization served a useful purpose. The code now is a lot clearer. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-19 12:49:15 +11:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md: remove special meaning of ->quiesce(.., 2) The '2' argument means "wake up anything that is waiting". This is an inelegant part of the design and was added to help support management of suspend_lo/suspend_hi setting. Now that suspend_lo/hi is managed in mddev_suspend/resume, that need is gone. These is still a couple of places where we call 'quiesce' with an argument of '2', but they can safely be changed to call ->quiesce(.., 1); ->quiesce(.., 0) which achieve the same result at the small cost of pausing IO briefly. This removes a small "optimization" from suspend_{hi,lo}_store, but it isn't clear that optimization served a useful purpose. The code now is a lot clearer. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-19 12:49:15 +11:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md: remove special meaning of ->quiesce(.., 2) The '2' argument means "wake up anything that is waiting". This is an inelegant part of the design and was added to help support management of suspend_lo/suspend_hi setting. Now that suspend_lo/hi is managed in mddev_suspend/resume, that need is gone. These is still a couple of places where we call 'quiesce' with an argument of '2', but they can safely be changed to call ->quiesce(.., 1); ->quiesce(.., 0) which achieve the same result at the small cost of pausing IO briefly. This removes a small "optimization" from suspend_{hi,lo}_store, but it isn't clear that optimization served a useful purpose. The code now is a lot clearer. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-19 12:49:15 +11:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md/raid10 - support resizing some RAID10 arrays. 'resizing' an array in this context means making use of extra space that has become available in component devices, not adding new devices. It also includes shrinking the array to take up less space of component devices. This is not supported for array with a 'far' layout. However for 'near' and 'offset' layout arrays, adding and removing space at the end of the devices is easy to support, and this patch provides that support. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:40 +11:00
md/raid10: Introduce 'prev' geometry to support reshape. When RAID10 supports reshape it will need a 'previous' and a 'current' geometry, so introduce that here. Use the 'prev' geometry when before the reshape_position, and the current 'geo' when beyond it. At other times, use both as appropriate. For now, both are identical (And reshape_position is never set). When we use the 'prev' geometry, we must use the old data_offset. When we use the current (And a reshape is happening) we must use the new_data_offset. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:33 +10:00
md/raid10: collect some geometry fields into a dedicated structure. We will shortly be adding reshape support for RAID10 which will require it having 2 concurrent geometries (before and after). To make that easier, collect most geometry fields into 'struct geom' and access them from there. Then we will more easily be able to add a second set of fields. Note that 'copies' is not in this struct and so cannot be changed. There is little need to change this number and doing so is a lot more difficult as it requires reallocating more things. So leave it out for now. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:28:20 +10:00
md/raid10 - support resizing some RAID10 arrays. 'resizing' an array in this context means making use of extra space that has become available in component devices, not adding new devices. It also includes shrinking the array to take up less space of component devices. This is not supported for array with a 'far' layout. However for 'near' and 'offset' layout arrays, adding and removing space at the end of the devices is easy to support, and this patch provides that support. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:40 +11:00
md: allow array to be resized while bitmap is present. Now that bitmaps can be resized, we can allow an array to be resized while the bitmap is present. This only covers resizing that involves changing the effective size of member devices, not resizing that changes the number of devices. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:27 +10:00
md/raid10 - support resizing some RAID10 arrays. 'resizing' an array in this context means making use of extra space that has become available in component devices, not adding new devices. It also includes shrinking the array to take up less space of component devices. This is not supported for array with a 'far' layout. However for 'near' and 'offset' layout arrays, adding and removing space at the end of the devices is easy to support, and this patch provides that support. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:40 +11:00
md: allow array to be resized while bitmap is present. Now that bitmaps can be resized, we can allow an array to be resized while the bitmap is present. This only covers resizing that involves changing the effective size of member devices, not resizing that changes the number of devices. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:27 +10:00
md: Avoid namespace collision with bitmap API bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-01 15:20:50 -07:00
md: allow array to be resized while bitmap is present. Now that bitmaps can be resized, we can allow an array to be resized while the bitmap is present. This only covers resizing that involves changing the effective size of member devices, not resizing that changes the number of devices. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:27 +10:00
md/raid10 - support resizing some RAID10 arrays. 'resizing' an array in this context means making use of extra space that has become available in component devices, not adding new devices. It also includes shrinking the array to take up less space of component devices. This is not supported for array with a 'far' layout. However for 'near' and 'offset' layout arrays, adding and removing space at the end of the devices is easy to support, and this patch provides that support. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:40 +11:00
md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17 10:08:45 +10:00
md/raid10 - support resizing some RAID10 arrays. 'resizing' an array in this context means making use of extra space that has become available in component devices, not adding new devices. It also includes shrinking the array to take up less space of component devices. This is not supported for array with a 'far' layout. However for 'near' and 'offset' layout arrays, adding and removing space at the end of the devices is easy to support, and this patch provides that support. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:40 +11:00
md/raid10: fix conversion from RAID0 to RAID10 A RAID0 array (like a LINEAR array) does not have a concept of 'size' being the amount of each device that is in use. Rather, as much of each device as is available is used. So the 'size' is set to 0 and ignored. RAID10 does have this concept and needs it to be set correctly. So when we convert RAID0 to RAID10 we must determine the 'size' (that being the size of the first 'strip_zone' in the RAID0), and set it correctly. Reported-and-tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-12 14:09:57 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md/raid10: typedef removal: conf_t -> struct r10conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: fix conversion from RAID0 to RAID10 A RAID0 array (like a LINEAR array) does not have a concept of 'size' being the amount of each device that is in use. Rather, as much of each device as is available is used. So the 'size' is set to 0 and ignored. RAID10 does have this concept and needs it to be set correctly. So when we convert RAID0 to RAID10 we must determine the 'size' (that being the size of the first 'strip_zone' in the RAID0), and set it correctly. Reported-and-tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-12 14:09:57 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: fix conversion from RAID0 to RAID10 A RAID0 array (like a LINEAR array) does not have a concept of 'size' being the amount of each device that is in use. Rather, as much of each device as is available is used. So the 'size' is set to 0 and ignored. RAID10 does have this concept and needs it to be set correctly. So when we convert RAID0 to RAID10 we must determine the 'size' (that being the size of the first 'strip_zone' in the RAID0), and set it correctly. Reported-and-tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-12 14:09:57 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
FIX: md: process hangs at wait_barrier after 0->10 takeover Following symptoms were observed: 1. After raid0->raid10 takeover operation we have array with 2 missing disks. When we add disk for rebuild, recovery process starts as expected but it does not finish- it stops at about 90%, md126_resync process hangs in "D" state. 2. Similar behavior is when we have mounted raid0 array and we execute takeover to raid10. After this when we try to unmount array- it causes process umount hangs in "D" In scenarios above processes hang at the same function- wait_barrier in raid10.c. Process waits in macro "wait_event_lock_irq" until the "!conf->barrier" condition will be true. In scenarios above it never happens. Reason was that at the end of level_store, after calling pers->run, we call mddev_resume. This calls pers->quiesce(mddev, 0) with RAID10, that calls lower_barrier. However raise_barrier hadn't been called on that 'conf' yet, so conf->barrier becomes negative, which is bad. This patch introduces setting conf->barrier=1 after takeover operation. It prevents to become barrier negative after call lower_barrier(). Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-04 14:18:26 +01:00
md: tidy up rdev_for_each usage. md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
md/raid10: fix conversion from RAID0 to RAID10 A RAID0 array (like a LINEAR array) does not have a concept of 'size' being the amount of each device that is in use. Rather, as much of each device as is available is used. So the 'size' is set to 0 and ignored. RAID10 does have this concept and needs it to be set correctly. So when we convert RAID0 to RAID10 we must determine the 'size' (that being the size of the first 'strip_zone' in the RAID0), and set it correctly. Reported-and-tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-12 14:09:57 +11:00
md: fix handling of array level takeover that re-arranges devices. Most array level changes leave the list of devices largely unchanged, possibly causing one at the end to become redundant. However conversions between RAID0 and RAID10 need to renumber all devices (except 0). This renumbering is currently being done in the ->run method when the new personality takes over. However this is too late as the common code in md.c might already have invalidated some of the devices if they had a ->raid_disk number that appeared to high. Moving it into the ->takeover method is too early as the array is still active at that time and wrong ->raid_disk numbers could cause confusion. So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate the new raid_disk number. Now the common code knows exactly which devices need to be renumbered, and which can be invalidated, and can do it all at a convenient time when the array is suspend. It can also update some symlinks in sysfs which previously were not be updated correctly. Reported-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-15 09:36:03 +01:00
md/raid10: fix conversion from RAID0 to RAID10 A RAID0 array (like a LINEAR array) does not have a concept of 'size' being the amount of each device that is in use. Rather, as much of each device as is available is used. So the 'size' is set to 0 and ignored. RAID10 does have this concept and needs it to be set correctly. So when we convert RAID0 to RAID10 we must determine the 'size' (that being the size of the first 'strip_zone' in the RAID0), and set it correctly. Reported-and-tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-12 14:09:57 +11:00
md/raid10: convert resync_lock to use seqlock Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-09-16 19:34:28 +08:00
FIX: md: process hangs at wait_barrier after 0->10 takeover Following symptoms were observed: 1. After raid0->raid10 takeover operation we have array with 2 missing disks. When we add disk for rebuild, recovery process starts as expected but it does not finish- it stops at about 90%, md126_resync process hangs in "D" state. 2. Similar behavior is when we have mounted raid0 array and we execute takeover to raid10. After this when we try to unmount array- it causes process umount hangs in "D" In scenarios above processes hang at the same function- wait_barrier in raid10.c. Process waits in macro "wait_event_lock_irq" until the "!conf->barrier" condition will be true. In scenarios above it never happens. Reason was that at the end of level_store, after calling pers->run, we call mddev_resume. This calls pers->quiesce(mddev, 0) with RAID10, that calls lower_barrier. However raise_barrier hadn't been called on that 'conf' yet, so conf->barrier becomes negative, which is bad. This patch introduces setting conf->barrier=1 after takeover operation. It prevents to become barrier negative after call lower_barrier(). Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-04 14:18:26 +01:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:59 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:59 +11:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: fix conversion from RAID0 to RAID10 A RAID0 array (like a LINEAR array) does not have a concept of 'size' being the amount of each device that is in use. Rather, as much of each device as is available is used. So the 'size' is set to 0 and ignored. RAID10 does have this concept and needs it to be set correctly. So when we convert RAID0 to RAID10 we must determine the 'size' (that being the size of the first 'strip_zone' in the RAID0), and set it correctly. Reported-and-tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-12 14:09:57 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 14:03:40 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: resize bitmap when required during reshape. If a reshape changes the size of the array, then we can now update the bitmap to suit - so do so. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: skip spare disk as 'first' disk Commit 6f287ca(md/raid10: reset the 'first' at the end of loop) ignores a case in reshape, the first rdev could be a spare disk, which shouldn't be accounted as the first disk since it doesn't include the offset info. Fix: 6f287ca(md/raid10: reset the 'first' at the end of loop) Cc: Guoqing Jiang <gqjiang@suse.com> Cc: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-01 12:15:07 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
MD RAID10: rename mirror_info structure MD RAID10: Rename the structure 'mirror_info' to 'raid10_info' The same structure name ('mirror_info') is used by raid1. Each of these structures are defined in there respective header files. If dm-raid is to support both RAID1 and RAID10, the header files will be included and the structure names must not collide. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: another memory leak due to reshape. Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-23 20:19:26 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: change printk() to pr_*() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 14:16:50 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: always set reshape_safe when initializing reshape_position. 'reshape_position' tracks where in the reshape we have reached. 'reshape_safe' tracks where in the reshape we have safely recorded in the metadata. These are compared to determine when to update the metadata. So it is important that reshape_safe is initialised properly. Currently it isn't. When starting a reshape from the beginning it usually has the correct value by luck. But when reducing the number of devices in a RAID10, it has the wrong value and this leads to the metadata not being updated correctly. This can lead to corruption if the reshape is not allowed to complete. This patch is suitable for any -stable kernel which supports RAID10 reshape, which is 3.5 and later. Fixes: 3ea7daa5d7fd ("md/raid10: add reshape support") Cc: stable@vger.kernel.org (v3.5+ please wait for -final to be out for 2 weeks) Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-06 17:37:49 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: resize bitmap when required during reshape. If a reshape changes the size of the array, then we can now update the bitmap to suit - so do so. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
md-cluster/raid10: resize all the bitmaps before start reshape To support add disk under grow mode, we need to resize all the bitmaps of each node before reshape, so that we can ensure all nodes have the same view of the bitmap of the clustered raid. So after the master node resized the bitmap, it broadcast a message to other slave nodes, and it checks the size of each bitmap are same or not by compare pages. We can only continue the reshaping after all nodes update the bitmap to the same size (by checking the pages), otherwise revert bitmap size to previous value. The resize_bitmaps interface and BITMAP_RESIZE message are introduced in md-cluster.c for the purpose. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:41 +08:00
md/raid10: resize bitmap when required during reshape. If a reshape changes the size of the array, then we can now update the bitmap to suit - so do so. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
md-cluster/raid10: resize all the bitmaps before start reshape To support add disk under grow mode, we need to resize all the bitmaps of each node before reshape, so that we can ensure all nodes have the same view of the bitmap of the clustered raid. So after the master node resized the bitmap, it broadcast a message to other slave nodes, and it checks the size of each bitmap are same or not by compare pages. We can only continue the reshaping after all nodes update the bitmap to the same size (by checking the pages), otherwise revert bitmap size to previous value. The resize_bitmaps interface and BITMAP_RESIZE message are introduced in md-cluster.c for the purpose. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:41 +08:00
md/raid10: resize bitmap when required during reshape. If a reshape changes the size of the array, then we can now update the bitmap to suit - so do so. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
md-cluster/raid10: resize all the bitmaps before start reshape To support add disk under grow mode, we need to resize all the bitmaps of each node before reshape, so that we can ensure all nodes have the same view of the bitmap of the clustered raid. So after the master node resized the bitmap, it broadcast a message to other slave nodes, and it checks the size of each bitmap are same or not by compare pages. We can only continue the reshaping after all nodes update the bitmap to the same size (by checking the pages), otherwise revert bitmap size to previous value. The resize_bitmaps interface and BITMAP_RESIZE message are introduced in md-cluster.c for the purpose. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:41 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: Fix compilation warning Remove the if statement around the call to sysfs_link_rdev() in raid10_start_reshape() to avoid the compilation warning: warning: suggest braces around empty body in an ‘if’ statement when compiling with W=1. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-16 13:54:43 +09:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: make sure MD_RECOVERY_DONE is clear before starting recovery/resync MD_RECOVERY_DONE is normally cleared by md_check_recovery after a resync etc finished. However it is possible for raid5_start_reshape to race and start a reshape before MD_RECOVERY_DONE is cleared. This can lean to multiple reshapes running at the same time, which isn't good. To make sure it is cleared before starting a reshape, and also clear it when reaping a thread, just to be safe. Signed-off-by: NeilBrown <neilb@suse.de>
2015-06-12 20:05:04 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: resize bitmap when required during reshape. If a reshape changes the size of the array, then we can now update the bitmap to suit - so do so. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: remove unused argument from md_new_event Actually, mddev is not used by md_new_event. Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-04 23:34:53 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: resize bitmap when required during reshape. If a reshape changes the size of the array, then we can now update the bitmap to suit - so do so. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
md/raid10: always set reshape_safe when initializing reshape_position. 'reshape_position' tracks where in the reshape we have reached. 'reshape_safe' tracks where in the reshape we have safely recorded in the metadata. These are compared to determine when to update the metadata. So it is important that reshape_safe is initialised properly. Currently it isn't. When starting a reshape from the beginning it usually has the correct value by luck. But when reducing the number of devices in a RAID10, it has the wrong value and this leads to the metadata not being updated correctly. This can lead to corruption if the reshape is not allowed to complete. This patch is suitable for any -stable kernel which supports RAID10 reshape, which is 3.5 and later. Fixes: 3ea7daa5d7fd ("md/raid10: add reshape support") Cc: stable@vger.kernel.org (v3.5+ please wait for -final to be out for 2 weeks) Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-06 17:37:49 +10:00
md/raid10: resize bitmap when required during reshape. If a reshape changes the size of the array, then we can now update the bitmap to suit - so do so. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: fix a few typos in comments Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-06 16:33:47 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: fix a few typos in comments Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-06 16:33:47 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: fix deadlock causing by sysfs_notify The following deadlock was captured. The first process is holding 'kernfs_mutex' and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device, this pending bio list would be flushed by second process 'md127_raid1', but it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace sysfs_notify() can fix it. There were other sysfs_notify() invoked from io path, removed all of them. PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file" #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06 #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6 #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs] #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs] #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs] #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs] #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs] #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs] #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a #16 [ffffb87c4df37958] new_slab at ffffffff9a251430 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905 RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890 RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0 R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1" #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06 #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013 #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83 #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696 #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1] #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-14 16:10:26 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: Simplify code with existing definition RESYNC_SECTORS in raid10.c #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9) "RESYNC_BLOCK_SIZE/512" is equal to "RESYNC_BLOCK_SIZE >> 9", replace it with RESYNC_SECTORS. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-21 09:29:18 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: Simplify code with existing definition RESYNC_SECTORS in raid10.c #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9) "RESYNC_BLOCK_SIZE/512" is equal to "RESYNC_BLOCK_SIZE >> 9", replace it with RESYNC_SECTORS. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-21 09:29:18 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10 add nowait support This adds nowait support to the RAID10 driver. Very similar to raid1 driver changes. It makes RAID10 driver return with EAGAIN for situations where it could wait for eg: - Waiting for the barrier, - Reshape operation, - Discard operation. wait_barrier() and regular_request_wait() fn are modified to return bool to support error for wait barriers. They returns true in case of wait or if wait is not required and returns false if wait was required but not performed to support nowait. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2021-12-21 20:06:21 +00:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread. We currently use kthread_should_stop() in various places in the sync/reshape code to abort early. However some places set MD_RECOVERY_INTR but don't immediately call md_reap_sync_thread() (and we will shortly get another one). When this happens we are relying on md_check_recovery() to reap the thread and that only happen when it finishes normally. So MD_RECOVERY_INTR must lead to a normal finish without the kthread_should_stop() test. So replace all relevant tests, and be more careful when the thread is interrupted not to acknowledge that latest step in a reshape as it may not be fully committed yet. Also add a test on MD_RECOVERY_INTR in the 'is_mddev_idle' loop so we don't wait have to wait for the speed to drop before we can abort. Signed-off-by: NeilBrown <neilb@suse.de>
2013-11-19 12:02:01 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0 In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true. In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON. Add one pair of raise_barrier/lower_barrier to fix this bug. Signed-off-by: Xiao Ni <xni@redhat.com> Suggested-by: Neil Brown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-08-30 15:57:09 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid1/10: reset bio allocated from mempool Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com> Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-24 17:50:40 -07:00
md/raid10: always initialise ->state on newly allocated r10_bio Most places which allocate an r10_bio zero the ->state, some don't. As the r10_bio comes from a mempool, and the allocation function uses kzalloc it is often zero anyway. But sometimes it isn't and it is best to be safe. I only noticed this because of the bug fixed by an earlier patch where the r10_bios allocated for a reshape were left around to be used by a subsequent resync. In that case the R10BIO_IsReshape flag caused problems. Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-18 14:38:45 +10:00
RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0 In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true. In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON. Add one pair of raise_barrier/lower_barrier to fix this bug. Signed-off-by: Xiao Ni <xni@redhat.com> Suggested-by: Neil Brown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-08-30 15:57:09 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:52 -04:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: pass a block_device and opf to bio_alloc_bioset Pass the block_device and operation that we plan to use this bio for to bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Also move the gfp_mask argument after the nr_vecs argument for a much more logical calling convention matching what most of the kernel does. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:11:03 +01:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: refactor code of read reshape's .bi_end_io reshape read request is a bit special and requires one extra bio which isn't allocated from r10buf_pool. Refactor the .bi_end_io for read reshape, so that we can use raid10's resync page mangement approach easily in the following patches. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:32 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md-cluster/raid10: support add disk under grow mode For clustered raid10 scenario, we need to let all the nodes know about that a new disk is added to the array, and the reshape caused by add new member just need to be happened in one node, but other nodes should know about the change. Since reshape means read data from somewhere (which is already used by array) and write data to unused region. Obviously, it is awful if one node is reading data from address while another node is writing to the same address. Considering we have implemented suspend writes in the resyncing area, so we can just broadcast the reading address to other nodes to avoid the trouble. For master node, it would call reshape_request then update sb during the reshape period. To avoid above trouble, we call resync_info_update to send RESYNC message in reshape_request. Then from slave node's view, it receives two type messages: 1. RESYNCING message Slave node add the address (where master node reading data from) to suspend list. 2. METADATA_UPDATED message Once slave nodes know the reshaping is started in master node, it is time to update reshape position and call start_reshape to follow master node's step. After reshape is done, only reshape position is need to be updated, so the majority task of reshaping is happened on the master node. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:42 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
raid10: Use bio_reset() More prep work for immutable bio vecs, mainly getting rid of references to bi_idx. bio_reset was being open coded in a few places. The one in sync_request was a bit nontrivial to convert, so could use some extra eyeballs. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: NeilBrown <neilb@suse.de> Acked-by: NeilBrown <neilb@suse.de>
2012-09-06 14:14:43 -07:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid1/raid10: don't handle failure of bio_add_page() All bio_add_page() is for adding one page into resync bio, which is big enough to hold RESYNC_PAGES pages, and the current bio_add_page() doesn't check queue limit any more, so it won't fail at all. remove unused label (shaohua) Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:22 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0 In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true. In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON. Add one pair of raise_barrier/lower_barrier to fix this bug. Signed-off-by: Xiao Ni <xni@redhat.com> Suggested-by: Neil Brown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-08-30 15:57:09 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 10:59:44 +02:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: always set reshape_safe when initializing reshape_position. 'reshape_position' tracks where in the reshape we have reached. 'reshape_safe' tracks where in the reshape we have safely recorded in the metadata. These are compared to determine when to update the metadata. So it is important that reshape_safe is initialised properly. Currently it isn't. When starting a reshape from the beginning it usually has the correct value by luck. But when reducing the number of devices in a RAID10, it has the wrong value and this leads to the metadata not being updated correctly. This can lead to corruption if the reshape is not allowed to complete. This patch is suitable for any -stable kernel which supports RAID10 reshape, which is 3.5 and later. Fixes: 3ea7daa5d7fd ("md/raid10: add reshape support") Cc: stable@vger.kernel.org (v3.5+ please wait for -final to be out for 2 weeks) Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-06 17:37:49 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: lift setting the readahead size into the block layer Drivers shouldn't really mess with the readahead size, as that is a VM concept. Instead set it based on the optimal I/O size by lifting the algorithm from the md driver when registering the disk. Also set bdi->io_pages there as well by applying the same scheme based on max_sectors. To ensure the limits work well for stacking drivers a new helper is added to update the readahead limits from the block limits, which is also called from disk_stack_limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24 08:51:34 +02:00
md: update the optimal I/O size on reshape The raid5 and raid10 drivers currently update the read-ahead size, but not the optimal I/O size on reshape. To prepare for deriving the read-ahead size from the optimal I/O size make sure it is updated as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24 08:51:33 +02:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md-cluster/raid10: support add disk under grow mode For clustered raid10 scenario, we need to let all the nodes know about that a new disk is added to the array, and the reshape caused by add new member just need to be happened in one node, but other nodes should know about the change. Since reshape means read data from somewhere (which is already used by array) and write data to unused region. Obviously, it is awful if one node is reading data from address while another node is writing to the same address. Considering we have implemented suspend writes in the resyncing area, so we can just broadcast the reading address to other nodes to avoid the trouble. For master node, it would call reshape_request then update sb during the reshape period. To avoid above trouble, we call resync_info_update to send RESYNC message in reshape_request. Then from slave node's view, it receives two type messages: 1. RESYNCING message Slave node add the address (where master node reading data from) to suspend list. 2. METADATA_UPDATED message Once slave nodes know the reshaping is started in master node, it is time to update reshape position and call start_reshape to follow master node's step. After reshape is done, only reshape position is need to be updated, so the majority task of reshaping is happened on the master node. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:42 +08:00
md-cluster: introduce resync_info_get interface for sanity check Since the resync region from suspend_info means one node is reshaping this area, so the position of reshape_progress should be included in the area. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:43 +08:00
md-cluster/raid10: support add disk under grow mode For clustered raid10 scenario, we need to let all the nodes know about that a new disk is added to the array, and the reshape caused by add new member just need to be happened in one node, but other nodes should know about the change. Since reshape means read data from somewhere (which is already used by array) and write data to unused region. Obviously, it is awful if one node is reading data from address while another node is writing to the same address. Considering we have implemented suspend writes in the resyncing area, so we can just broadcast the reading address to other nodes to avoid the trouble. For master node, it would call reshape_request then update sb during the reshape period. To avoid above trouble, we call resync_info_update to send RESYNC message in reshape_request. Then from slave node's view, it receives two type messages: 1. RESYNCING message Slave node add the address (where master node reading data from) to suspend list. 2. METADATA_UPDATED message Once slave nodes know the reshaping is started in master node, it is time to update reshape position and call start_reshape to follow master node's step. After reshape is done, only reshape position is need to be updated, so the majority task of reshaping is happened on the master node. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:42 +08:00
md-cluster: introduce resync_info_get interface for sanity check Since the resync region from suspend_info means one node is reshaping this area, so the position of reshape_progress should be included in the area. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:43 +08:00
md-cluster/raid10: support add disk under grow mode For clustered raid10 scenario, we need to let all the nodes know about that a new disk is added to the array, and the reshape caused by add new member just need to be happened in one node, but other nodes should know about the change. Since reshape means read data from somewhere (which is already used by array) and write data to unused region. Obviously, it is awful if one node is reading data from address while another node is writing to the same address. Considering we have implemented suspend writes in the resyncing area, so we can just broadcast the reading address to other nodes to avoid the trouble. For master node, it would call reshape_request then update sb during the reshape period. To avoid above trouble, we call resync_info_update to send RESYNC message in reshape_request. Then from slave node's view, it receives two type messages: 1. RESYNCING message Slave node add the address (where master node reading data from) to suspend list. 2. METADATA_UPDATED message Once slave nodes know the reshaping is started in master node, it is time to update reshape position and call start_reshape to follow master node's step. After reshape is done, only reshape position is need to be updated, so the majority task of reshaping is happened on the master node. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:42 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: remove VLAIS The raid10 driver can't be built with clang since it uses a variable length array in a structure (VLAIS): drivers/md/raid10.c:4583:17: error: fields must have a constant size: 'variable length array in structure' extension will never be supported Allocate the r10bio struct with kmalloc instead of using the VLAIS construct. Shaohua: set the MD_RECOVERY_INTR bit Neil Brown: use GFP_NOIO Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-05 11:28:47 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: avoid direct access to bvec table in handle_reshape_read_error All reshape I/O share pages from 1st copy device, so just use that pages for avoiding direct access to bvec table in handle_reshape_read_error. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:35 +08:00
md: raid10: Use struct_size() in kmalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kmalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-14 15:41:09 -07:00
md: raid10: remove VLAIS The raid10 driver can't be built with clang since it uses a variable length array in a structure (VLAIS): drivers/md/raid10.c:4583:17: error: fields must have a constant size: 'variable length array in structure' extension will never be supported Allocate the r10bio struct with kmalloc instead of using the VLAIS construct. Shaohua: set the MD_RECOVERY_INTR bit Neil Brown: use GFP_NOIO Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-05 11:28:47 -07:00
md: raid10: avoid direct access to bvec table in handle_reshape_read_error All reshape I/O share pages from 1st copy device, so just use that pages for avoiding direct access to bvec table in handle_reshape_read_error. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:35 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: fix problem with on-stack allocation of r10bio structure. A 'struct r10bio' has an array of per-copy information at the end. This array is declared with size [0] and r10bio_pool_alloc allocates enough extra space to store the per-copy information depending on the number of copies needed. So declaring a 'struct r10bio on the stack isn't going to work. It won't allocate enough space, and memory corruption will ensue. So in the two places where this is done, declare a sufficiently large structure and use that instead. The two call-sites of this bug were introduced in 3.4 and 3.5 so this is suitable for both those kernels. The patch will have to be modified for 3.4 as it only has one bug. Cc: stable@vger.kernel.org Reported-by: Ivan Vasilyev <ivan.vasilyev@gmail.com> Tested-by: Ivan Vasilyev <ivan.vasilyev@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-18 09:51:42 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: fix problem with on-stack allocation of r10bio structure. A 'struct r10bio' has an array of per-copy information at the end. This array is declared with size [0] and r10bio_pool_alloc allocates enough extra space to store the per-copy information depending on the number of copies needed. So declaring a 'struct r10bio on the stack isn't going to work. It won't allocate enough space, and memory corruption will ensue. So in the two places where this is done, declare a sufficiently large structure and use that instead. The two call-sites of this bug were introduced in 3.4 and 3.5 so this is suitable for both those kernels. The patch will have to be modified for 3.4 as it only has one bug. Cc: stable@vger.kernel.org Reported-by: Ivan Vasilyev <ivan.vasilyev@gmail.com> Tested-by: Ivan Vasilyev <ivan.vasilyev@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-18 09:51:42 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: fix problem with on-stack allocation of r10bio structure. A 'struct r10bio' has an array of per-copy information at the end. This array is declared with size [0] and r10bio_pool_alloc allocates enough extra space to store the per-copy information depending on the number of copies needed. So declaring a 'struct r10bio on the stack isn't going to work. It won't allocate enough space, and memory corruption will ensue. So in the two places where this is done, declare a sufficiently large structure and use that instead. The two call-sites of this bug were introduced in 3.4 and 3.5 so this is suitable for both those kernels. The patch will have to be modified for 3.4 as it only has one bug. Cc: stable@vger.kernel.org Reported-by: Ivan Vasilyev <ivan.vasilyev@gmail.com> Tested-by: Ivan Vasilyev <ivan.vasilyev@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-18 09:51:42 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: avoid direct access to bvec table in handle_reshape_read_error All reshape I/O share pages from 1st copy device, so just use that pages for avoiding direct access to bvec table in handle_reshape_read_error. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:35 +08:00
md/core: Combine two sync_page_io() arguments Improve uniformity in the kernel of handling of request operation and flags by passing these as a single argument. Cc: Song Liu <song@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 11:06:57 -07:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: remove VLAIS The raid10 driver can't be built with clang since it uses a variable length array in a structure (VLAIS): drivers/md/raid10.c:4583:17: error: fields must have a constant size: 'variable length array in structure' extension will never be supported Allocate the r10bio struct with kmalloc instead of using the VLAIS construct. Shaohua: set the MD_RECOVERY_INTR bit Neil Brown: use GFP_NOIO Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-05 11:28:47 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: remove VLAIS The raid10 driver can't be built with clang since it uses a variable length array in a structure (VLAIS): drivers/md/raid10.c:4583:17: error: fields must have a constant size: 'variable length array in structure' extension will never be supported Allocate the r10bio struct with kmalloc instead of using the VLAIS construct. Shaohua: set the MD_RECOVERY_INTR bit Neil Brown: use GFP_NOIO Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-05 11:28:47 -07:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: raid10: don't use bio's vec table to manage resync pages Now we allocate one page array for managing resync pages, instead of using bio's vec table to do that, and the old way is very hacky and won't work any more if multipage bvec is enabled. The introduced cost is that we need to allocate (128 + 16) * copies bytes per r10_bio, and it is fine because the inflight r10_bio for resync shouldn't be much, as pointed by Shaohua. Also bio_reset() in raid10_sync_request() and reshape_request() are removed because all bios are freshly new now in these functions and not necessary to reset any more. This patch can be thought as cleanup too. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-17 00:12:33 +08:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: fix a potential deadlock of raid5/raid10 reshape There is a potential deadlock if mount/umount happens when raid5_finish_reshape() tries to grow the size of emulated disk. How the deadlock happens? 1) The raid5 resync thread finished reshape (expanding array). 2) The mount or umount thread holds VFS sb->s_umount lock and tries to write through critical data into raid5 emulated block device. So it waits for raid5 kernel thread handling stripes in order to finish it I/Os. 3) In the routine of raid5 kernel thread, md_check_recovery() will be called first in order to reap the raid5 resync thread. That is, raid5_finish_reshape() will be called. In this function, it will try to update conf and call VFS revalidate_disk() to grow the raid5 emulated block device. It will try to acquire VFS sb->s_umount lock. The raid5 kernel thread cannot continue, so no one can handle mount/ umount I/Os (stripes). Once the write-through I/Os cannot be finished, mount/umount will not release sb->s_umount lock. The deadlock happens. The raid5 kernel thread is an emulated block device. It is responible to handle I/Os (stripes) from upper layers. The emulated block device should not request any I/Os on itself. That is, it should not call VFS layer functions. (If it did, it will try to acquire VFS locks to guarantee the I/Os sequence.) So we have the resync thread to send resync I/O requests and to wait for the results. For solving this potential deadlock, we can put the size growth of the emulated block device as the final step of reshape thread. 2017/12/29: Thanks to Guoqing Jiang <gqjiang@suse.com>, we confirmed that there is the same deadlock issue in raid10. It's reproducible and can be fixed by this patch. For raid10.c, we can remove the similar code to prevent deadlock as well since they has been called before. Reported-by: Alex Wu <alexwu@synology.com> Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-22 13:34:46 +08:00
md/raid10: Remove extras after reshape to smaller number of devices. When a reshape which reduced the number of devices finishes we must remove the extra devices. So ensure that raid10_remove_disk won't try to keep them, and have raid10_finish_reshape clear the 'in_sync' flag. Then remove_and_add_spares will be able to remove them. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:33 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: Remove extras after reshape to smaller number of devices. When a reshape which reduced the number of devices finishes we must remove the extra devices. So ensure that raid10_remove_disk won't try to keep them, and have raid10_finish_reshape clear the 'in_sync' flag. Then remove_and_add_spares will be able to remove them. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:33 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: Remove extras after reshape to smaller number of devices. When a reshape which reduced the number of devices finishes we must remove the extra devices. So ensure that raid10_remove_disk won't try to keep them, and have raid10_finish_reshape clear the 'in_sync' flag. Then remove_and_add_spares will be able to remove them. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:33 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: Remove extras after reshape to smaller number of devices. When a reshape which reduced the number of devices finishes we must remove the extra devices. So ensure that raid10_remove_disk won't try to keep them, and have raid10_finish_reshape clear the 'in_sync' flag. Then remove_and_add_spares will be able to remove them. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:33 +10:00
md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:52 +10:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md: rename "mdk_personality" to "md_personality" "mdk" doesn't mean anything any more. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:58 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD: rename some functions These short function names are hard to search. Rename them to make vim happy. Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-20 13:52:20 -08:00
md: rename ->stop to ->free Now that the ->stop function only frees the private data, rename is accordingly. Also pass in the private pointer as an arg rather than using mddev->private. This flexibility will be useful in level_store(). Finally, don't clear ->private. It doesn't make sense to clear it seeing that isn't what we free, and it is no longer necessary to clear ->private (it was some time ago before ->to_remove was introduced). Setting ->to_remove in ->free() is a bit of a wart, but not a big problem at the moment. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:58 +11:00
MD: rename some functions These short function names are hard to search. Rename them to make vim happy. Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-20 13:52:20 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD: rename some functions These short function names are hard to search. Rename them to make vim happy. Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-20 13:52:20 -08:00
[PATCH] md: write intent bitmap support for raid10 Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:16 -08:00
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-17 18:10:40 -07:00
md/raid10 - support resizing some RAID10 arrays. 'resizing' an array in this context means making use of extra space that has become available in component devices, not adding new devices. It also includes shrinking the array to take up less space of component devices. This is not supported for array with a 'far' layout. However for 'near' and 'offset' layout arrays, adding and removing space at the end of the devices is easy to support, and this patch provides that support. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:40 +11:00
md: Add support for Raid0->Raid10 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 16:02:45 +11:00
md/raid10: add reshape support A 'near' or 'offset' lay RAID10 array can be reshaped to a different 'near' or 'offset' layout, a different chunk size, and a different number of devices. However the number of copies cannot change. Unlike RAID5/6, we do not support having user-space backup data that is being relocated during a 'critical section'. Rather, the data_offset of each device must change so that when writing any block to a new location, it will not over-write any data that is still 'live'. This means that RAID10 reshape is not supportable on v0.90 metadata. The different between the old data_offset and the new_offset must be at least the larger of the chunksize multiplied by offset copies of each of the old and new layout. (for 'near' mode, offset_copies == 1). A larger difference of around 64M seems useful for in-place reshapes as more data can be moved between metadata updates. Very large differences (e.g. 512M) seem to slow the process down due to lots of long seeks (on oldish consumer graded devices at least). Metadata needs to be updated whenever the place we are about to write to is considered - by the current metadata - to still contain data in the old layout. [unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
md-cluster/raid10: support add disk under grow mode For clustered raid10 scenario, we need to let all the nodes know about that a new disk is added to the array, and the reshape caused by add new member just need to be happened in one node, but other nodes should know about the change. Since reshape means read data from somewhere (which is already used by array) and write data to unused region. Obviously, it is awful if one node is reading data from address while another node is writing to the same address. Considering we have implemented suspend writes in the resyncing area, so we can just broadcast the reading address to other nodes to avoid the trouble. For master node, it would call reshape_request then update sb during the reshape period. To avoid above trouble, we call resync_info_update to send RESYNC message in reshape_request. Then from slave node's view, it receives two type messages: 1. RESYNCING message Slave node add the address (where master node reading data from) to suspend list. 2. METADATA_UPDATED message Once slave nodes know the reshaping is started in master node, it is time to update reshape position and call start_reshape to follow master node's step. After reshape is done, only reshape position is need to be updated, so the majority task of reshaping is happened on the master node. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 16:37:42 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: add MODULE_DESCRIPTION for all md related modules. Suggested by Oren Held <orenhe@il.ibm.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: allow array level to be set textually via sysfs Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:51 -08:00
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:36 -08:00