linux

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2017-11-01 15:07:57 +01:00

2009-12-14 20:09:31 -02:00

perf tools: Remove needless perf.h include directive from headers Its not needed there, add it to the places that need it and were getting it via those headers. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-5yulx1u16vyd0zmrbg1tjhju@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-08-29 15:20:59 -03:00

2009-12-14 20:09:31 -02:00

perf tools: Resolve machine earlier and pass it to perf_event_ops Reducing the exposure of perf_session further, so that we can use the classes in cases where no perf.data file is created. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2011-11-28 07:56:39 -02:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

2009-12-14 20:09:31 -02:00

perf tools: Rename perf_event_ops to perf_tool To better reflect that it became the base class for all tools, that must be in each tool struct and where common stuff will be put. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qgpc4msetqlwr8y2k7537cxe@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2011-11-28 08:30:20 -02:00

2009-12-14 20:09:31 -02:00

perf srcline: Add missing srcline.h header to files needing its defs When srcline was introduced it wrongly added the include to util/sort.h, even with that header not needing the definitions it provides, fix it by adding it to the places that need it as a pre patch to remove srcline.h from sort.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-shuebppedtye8hrgxk15qe3x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-08-22 17:10:08 -03:00

2009-12-14 20:09:31 -02:00

perf tools: Add data object to handle perf data file This patch is adding 'struct perf_data_file' object as a placeholder for all attributes regarding perf.data file handling. Changing perf_session__new to take it as an argument. The rest of the functionality will be added later to keep this change simple enough, because all the places using perf_session are changed now. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381847254-28809-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-10-15 16:27:32 +02:00

perf diff: Add diff.order config option In many cases, I need to look at differences between two data so I often used the -o option to sort the result base on the difference first. It'd be nice to have a config option to set it by default. The diff.order config option is to set the default value of -o/--order option. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/20170210073614.24584-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-10 16:36:12 +09:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf block: Cleanup and refactor block info functions We have already implemented some block-info related functions. Now it's time to do some cleanup, refactoring and move the functions and structures to new block-info.h/block-info.c. v4: --- Move code for skipping column length calculation to patch: 'perf diff: Don't use hack to skip column length calculation' v3: --- 1. Rename the patch title 2. Rename from block.h/block.c to block-info.h/block-info.c 3. Move more common part to block-info, such as block_info__process_sym. 4. Remove the nasty hack for skipping calculation of column length Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-11-07 15:47:14 +08:00

2020-10-09 10:28:45 +08:00

perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-08-22 12:50:49 +05:30

tools lib: Adopt zalloc()/zfree() from tools/perf Eroding a bit more the tools/perf/util/util.h hodpodge header. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-04 11:32:27 -03:00

perf debug: Remove needless include directives from debug.h All we need there is a forward declaration for 'union perf_event', so remove it from there and add missing header directives in places using things from this indirect include. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-08-29 16:18:59 -03:00

perf srcline: Add missing srcline.h header to files needing its defs When srcline was introduced it wrongly added the include to util/sort.h, even with that header not needing the definitions it provides, fix it by adding it to the places that need it as a pre patch to remove srcline.h from sort.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-shuebppedtye8hrgxk15qe3x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-08-22 17:10:08 -03:00

2009-12-14 20:09:31 -02:00

perf tools: Include errno.h where needed Removing it from util.h, part of an effort to disentangle the includes hell, that makes changes to util.h or something included by it to cause a complete rebuild of the tools. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-04-18 10:46:11 -03:00

perf tools: Including missing inttypes.h header Needed to use the PRI[xu](32,64) formatting macros. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-04-17 15:23:08 -03:00

2009-12-14 20:09:31 -02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf diff: Check if all data files with branch stacks We will expand perf diff to support diff cycles of individual programs blocks, so it requires all data files having branch stacks. This patch checks HEADER_BRANCH_STACK in header, and only set the flag has_br_stack when HEADER_BRANCH_STACK are set in all data files. v2: --- Move check_file_brstack() from __cmd_diff() to cmd_diff(). Because later patch will check flag 'has_br_stack' before ui_init(). Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:00 +08:00

2020-10-09 10:28:45 +08:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2017-02-10 16:36:11 +09:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2009-12-14 20:09:31 -02:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf tools: Rename struct perf_data_file to perf_data Rename struct perf_data_file to perf_data, because we will add the possibility to have multiple files under perf.data, so the 'perf_data' name fits better. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Changbin Du <changbin.du@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org [ Fixup recent changes in 'perf script --per-event-dump' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-01-23 22:07:59 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

2020-10-09 10:28:45 +08:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Add -p option to display period values for hist entries Adding -p option to show period values for both compared hist entries. Showing hist column PERF_HPP__PERIOD and newly added hist column PERF_HPP__PERIOD_BASELINE. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-6-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:44 +02:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Change default setting to "delta-abs" The "delta-abs" compute method will show most changed entries on top. So users can easily see how much effect between the data. Note that it also changes the default of -o option to 1 in order to apply the compute method. To see original-style (sorted by baseline) use -o 0 option. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170210161856.18422-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-11 01:18:56 +09:00

2009-12-14 20:09:31 -02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Support --cpu filter option To improve 'perf diff', implement a --cpu filter option. Multiple CPUs can be provided as a comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. Default is to report samples on all CPUs. For example, perf diff --cpu 0,1 It only diff the samples for CPU0 and CPU1. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:42 +08:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

2017-02-10 16:36:11 +09:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

2020-10-09 10:28:45 +08:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

2017-02-10 16:36:11 +09:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Change default setting to "delta-abs" The "delta-abs" compute method will show most changed entries on top. So users can easily see how much effect between the data. Note that it also changes the default of -o option to 1 in order to apply the compute method. To see original-style (sorted by baseline) use -o 0 option. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170210161856.18422-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-11 01:18:56 +09:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2017-02-10 16:36:11 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2017-02-10 16:36:11 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Add --percentage option The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only. For more information, please see previous commit same thing done to "perf report". Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-5-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>

2014-02-07 12:06:07 +09:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Switching the base hists to be pairs head Making the baseline hists to act as a pairs head. So far we don't care which hists act as a pairs head, because we have only 2 files to deal with and any of them is suitable to do the job. But if we want to process more files, we need to pick up one hists to act as pairs head, and the baseline hists is the most suitable. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cklmt2o4j87i9viz900245ae@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:15:40 +01:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Switching the base hists to be pairs head Making the baseline hists to act as a pairs head. So far we don't care which hists act as a pairs head, because we have only 2 files to deal with and any of them is suitable to do the job. But if we want to process more files, we need to pick up one hists to act as pairs head, and the baseline hists is the most suitable. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cklmt2o4j87i9viz900245ae@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:15:40 +01:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Switching the base hists to be pairs head Making the baseline hists to act as a pairs head. So far we don't care which hists act as a pairs head, because we have only 2 files to deal with and any of them is suitable to do the job. But if we want to process more files, we need to pick up one hists to act as pairs head, and the baseline hists is the most suitable. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cklmt2o4j87i9viz900245ae@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:15:40 +01:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Switching the base hists to be pairs head Making the baseline hists to act as a pairs head. So far we don't care which hists act as a pairs head, because we have only 2 files to deal with and any of them is suitable to do the job. But if we want to process more files, we need to pick up one hists to act as pairs head, and the baseline hists is the most suitable. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cklmt2o4j87i9viz900245ae@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:15:40 +01:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Switching the base hists to be pairs head Making the baseline hists to act as a pairs head. So far we don't care which hists act as a pairs head, because we have only 2 files to deal with and any of them is suitable to do the job. But if we want to process more files, we need to pick up one hists to act as pairs head, and the baseline hists is the most suitable. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cklmt2o4j87i9viz900245ae@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:15:40 +01:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Switching the base hists to be pairs head Making the baseline hists to act as a pairs head. So far we don't care which hists act as a pairs head, because we have only 2 files to deal with and any of them is suitable to do the job. But if we want to process more files, we need to pick up one hists to act as pairs head, and the baseline hists is the most suitable. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cklmt2o4j87i9viz900245ae@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:15:40 +01:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Change formula methods to work with pair directly Changing formula methods to operate over hist entry and its pair directly. This makes the code more obvious and readable, instead of all time checking for pair being != NULL. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1354110769-2998-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-28 14:52:41 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Add --percentage option The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only. For more information, please see previous commit same thing done to "perf report". Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-5-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>

2014-02-07 12:06:07 +09:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Add --percentage option The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only. For more information, please see previous commit same thing done to "perf report". Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-5-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>

2014-02-07 12:06:07 +09:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Change formula methods to work with pair directly Changing formula methods to operate over hist entry and its pair directly. This makes the code more obvious and readable, instead of all time checking for pair being != NULL. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1354110769-2998-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-28 14:52:41 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Switching the base hists to be pairs head Making the baseline hists to act as a pairs head. So far we don't care which hists act as a pairs head, because we have only 2 files to deal with and any of them is suitable to do the job. But if we want to process more files, we need to pick up one hists to act as pairs head, and the baseline hists is the most suitable. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cklmt2o4j87i9viz900245ae@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:15:40 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Change formula methods to work with pair directly Changing formula methods to operate over hist entry and its pair directly. This makes the code more obvious and readable, instead of all time checking for pair being != NULL. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1354110769-2998-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-28 14:52:41 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Switching the base hists to be pairs head Making the baseline hists to act as a pairs head. So far we don't care which hists act as a pairs head, because we have only 2 files to deal with and any of them is suitable to do the job. But if we want to process more files, we need to pick up one hists to act as pairs head, and the baseline hists is the most suitable. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cklmt2o4j87i9viz900245ae@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:15:40 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

2017-02-10 16:36:11 +09:00

perf diff: Change formula methods to work with pair directly Changing formula methods to operate over hist entry and its pair directly. This makes the code more obvious and readable, instead of all time checking for pair being != NULL. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1354110769-2998-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-28 14:52:41 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Change formula methods to work with pair directly Changing formula methods to operate over hist entry and its pair directly. This makes the code more obvious and readable, instead of all time checking for pair being != NULL. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1354110769-2998-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-28 14:52:41 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Change formula methods to work with pair directly Changing formula methods to operate over hist entry and its pair directly. This makes the code more obvious and readable, instead of all time checking for pair being != NULL. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1354110769-2998-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-28 14:52:41 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf tools: Pass tool context in the the perf_event_ops functions So that we don't need to have that many globals. Next steps will remove the 'session' pointer, that in most cases is not needed. Then we can rename perf_event_ops to 'perf_tool' that better describes this class hierarchy. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-wp4djox7x6w1i2bab1pt4xxp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2011-11-25 08:19:45 -02:00

perf tools: Rename 'struct sample_data' to 'struct perf_sample' Making the namespace more uniform. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2011-01-29 13:02:00 -02:00

perf evsel: Rename struct perf_evsel to struct evsel Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:51 +02:00

perf tools: Resolve machine earlier and pass it to perf_event_ops Reducing the exposure of perf_session further, so that we can use the classes in cases where no perf.data file is created. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2011-11-28 07:56:39 -02:00

2009-12-14 20:09:31 -02:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

2009-12-14 20:09:31 -02:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

2020-10-09 10:28:45 +08:00

perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-04-06 20:43:22 -03:00

2009-12-14 20:09:31 -02:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf machine: Rename perf_event__preprocess_sample to machine__resolve Since we only deal with fields in the passed struct perf_sample move this method to struct machine, that is where the perf_sample fields will be resolved to a struct addr_location, i.e. thread, map, symbol, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-a1ww2lbm2vbuqsv4p7ilubu9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-03-22 18:39:09 -03:00

2009-12-14 20:09:31 -02:00

perf diff: Support --cpu filter option To improve 'perf diff', implement a --cpu filter option. Multiple CPUs can be provided as a comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. Default is to report samples on all CPUs. For example, perf diff --cpu 0,1 It only diff the samples for CPU0 and CPU1. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:42 +08:00

2020-10-09 10:28:45 +08:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf hist: Count the total cycles of all samples We can get the per sample cycles by hist__account_cycles(). It's also useful to know the total cycles of all samples in order to get the cycles coverage for a single program block in further. For example: coverage = per block sampled cycles / total sampled cycles This patch creates a new argument 'total_cycles' in hist__account_cycles(), which will be added with the cycles of each sample. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-4-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-11-07 15:47:15 +08:00

2020-10-09 10:28:45 +08:00

2009-12-14 20:09:31 -02:00

perf tools: Account entry stats when it's added to the output tree Currently, accounting each sample is done in multiple places - once when adding them to the input tree, other when adding them to the output tree. It's not only confusing but also can cause a subtle problem since concurrent processing like in perf top might see the updated stats before adding entries into the output tree - like seeing more (blank) lines at the end and/or slight inaccurate percentage. To fix this, only account the entries when it's moved into the output tree so that they cannot be seen prematurely. There're some exceptional cases here and there - they should be addressed separately with comments. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1398327843-31845-7-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>

2014-04-22 11:44:21 +09:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf tools: Account entry stats when it's added to the output tree Currently, accounting each sample is done in multiple places - once when adding them to the input tree, other when adding them to the output tree. It's not only confusing but also can cause a subtle problem since concurrent processing like in perf top might see the updated stats before adding entries into the output tree - like seeing more (blank) lines at the end and/or slight inaccurate percentage. To fix this, only account the entries when it's moved into the output tree so that they cannot be seen prematurely. There're some exceptional cases here and there - they should be addressed separately with comments. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1398327843-31845-7-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>

2014-04-22 11:44:21 +09:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-04-06 20:43:22 -03:00

2009-12-14 20:09:31 -02:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf tools: Basic support for CGROUP event Implement basic functionality to support cgroup tracking. Each cgroup can be identified by inode number which can be read from userspace too. The actual cgroup processing will come in the later patch. Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> [ fix perf test failure on sampling parsing ] Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325124536.2800725-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-03-25 21:45:30 +09:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

2009-12-14 20:09:31 -02:00

perf evsel: Rename struct perf_evsel to struct evsel Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:51 +02:00

perf evlist: Rename struct perf_evlist to struct evlist Rename struct perf_evlist to struct evlist, so we don't have a name clash when we add struct perf_evlist in libperf. Committer notes: Added fixes to build on arm64, from Jiri and from me (tools/perf/util/cs-etm.c) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:52 +02:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf evsel: Rename struct perf_evsel to struct evsel Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:51 +02:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf evlist: Rename for_each() macros to for_each_entry() To match the semantics for list.h in the kernel, that are used to implement those macros. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-06-23 11:26:15 -03:00

perf evsel: Rename perf_evsel__is_*() to evsel__is*() As those are 'struct evsel' methods, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-04-30 10:51:16 -03:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf evlist: Introduce evlist__for_each() & friends For the common evsel list traversal, so that it becomes more compact. Use the opportunity to start ditching the 'perf_' from 'perf_evlist__', as discussed, as the whole conversion touches a lot of places, lets do it piecemeal when we have the chance due to other work, like in this case. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qnkx7dzm2h6m6uptkfk03ni6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-01-10 10:37:27 -03:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf evlist: Use the right prefix for 'struct evlist' diff methods perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-11-30 15:18:48 -03:00

perf diff: Refactor diff displacement possition info Moving the position calculation into the diff command, so the position as prepared inside struct hist_entry data and there's no need to compute in the output display path. Removing 'displacement' from struct perf_hpp as it is no longer needed. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-3-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-04 21:49:36 +09:00

perf evsel: Rename struct perf_evsel to struct evsel Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:51 +02:00

perf diff: Refactor diff displacement possition info Moving the position calculation into the diff command, so the position as prepared inside struct hist_entry data and there's no need to compute in the output display path. Removing 'displacement' from struct perf_hpp as it is no longer needed. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-3-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-04 21:49:36 +09:00

perf evlist: Rename for_each() macros to for_each_entry() To match the semantics for list.h in the kernel, that are used to implement those macros. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-06-23 11:26:15 -03:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf diff: Refactor diff displacement possition info Moving the position calculation into the diff command, so the position as prepared inside struct hist_entry data and there's no need to compute in the output display path. Removing 'displacement' from struct perf_hpp as it is no longer needed. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-3-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-04 21:49:36 +09:00

perf tools: Show progress on histogram collapsing It can take quite amount of time so add progress bar UI to inform user. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381468543-25334-4-git-send-email-namhyung@kernel.org [ perf_progress -> ui_progress ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-10-11 14:15:38 +09:00

perf diff: Refactor diff displacement possition info Moving the position calculation into the diff command, so the position as prepared inside struct hist_entry data and there's no need to compute in the output display path. Removing 'displacement' from struct perf_hpp as it is no longer needed. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-3-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-04 21:49:36 +09:00

perf diff: Introduce fmt_to_data_file() helper The fmt_to_data_file() is to retrieve struct data__file from perf_hpp_fmt which is embedded in diff_hpp_fmt. It'll be used by sort callback functions later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:45 +09:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf diff: Introduce fmt_to_data_file() helper The fmt_to_data_file() is to retrieve struct data__file from perf_hpp_fmt which is embedded in diff_hpp_fmt. It'll be used by sort callback functions later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:45 +09:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf hist: Use cached rbtrees At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something heavily required for histograms. Specifically, the following are converted to rb_root_cached, and users accordingly: hist::entries_in_array hist::entries_in hist::entries hist::entries_collapsed hist_entry::hroot_in hist_entry::hroot_out Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net [ Added some missing conversions to rb_first_cached() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2018-12-06 11:18:18 -08:00

perf hists: Link hist entries before inserting to an output tree For matching and/or linking hist entries, they need to be sorted by given sort keys. However current hists__match/link did this on the output trees, so that the entries in the output tree need to be resort before doing it. This looks not so good since we have trees for collecting or collapsing entries before passing them to an output tree and they're already sorted by the given sort keys. Since we don't need to print anything at the time of matching/linking, we can use these internal trees directly instead of bothering with double resort on the output tree. Its only user - at the time of this writing - perf diff can be easily converted to use the internal tree and can save some lines too by getting rid of unnecessary resorting codes. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1355128197-18193-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-10 17:29:55 +09:00

perf hists: Move sort__need_collapse into struct perf_hpp_list Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__need_collapse into struct perf_hpp_list. Adding hists__has macro to easily access this info perf struct hists object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-05-03 13:54:42 +02:00

perf hists: Link hist entries before inserting to an output tree For matching and/or linking hist entries, they need to be sorted by given sort keys. However current hists__match/link did this on the output trees, so that the entries in the output tree need to be resort before doing it. This looks not so good since we have trees for collecting or collapsing entries before passing them to an output tree and they're already sorted by the given sort keys. Since we don't need to print anything at the time of matching/linking, we can use these internal trees directly instead of bothering with double resort on the output tree. Its only user - at the time of this writing - perf diff can be easily converted to use the internal tree and can save some lines too by getting rid of unnecessary resorting codes. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1355128197-18193-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-10 17:29:55 +09:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf hist: Use cached rbtrees At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something heavily required for histograms. Specifically, the following are converted to rb_root_cached, and users accordingly: hist::entries_in_array hist::entries_in hist::entries hist::entries_collapsed hist_entry::hroot_in hist_entry::hroot_out Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net [ Added some missing conversions to rb_first_cached() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2018-12-06 11:18:18 -08:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf hists: Link hist entries before inserting to an output tree For matching and/or linking hist entries, they need to be sorted by given sort keys. However current hists__match/link did this on the output trees, so that the entries in the output tree need to be resort before doing it. This looks not so good since we have trees for collecting or collapsing entries before passing them to an output tree and they're already sorted by the given sort keys. Since we don't need to print anything at the time of matching/linking, we can use these internal trees directly instead of bothering with double resort on the output tree. Its only user - at the time of this writing - perf diff can be easily converted to use the internal tree and can save some lines too by getting rid of unnecessary resorting codes. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1355128197-18193-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-10 17:29:55 +09:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf hists: Link hist entries before inserting to an output tree For matching and/or linking hist entries, they need to be sorted by given sort keys. However current hists__match/link did this on the output trees, so that the entries in the output tree need to be resort before doing it. This looks not so good since we have trees for collecting or collapsing entries before passing them to an output tree and they're already sorted by the given sort keys. Since we don't need to print anything at the time of matching/linking, we can use these internal trees directly instead of bothering with double resort on the output tree. Its only user - at the time of this writing - perf diff can be easily converted to use the internal tree and can save some lines too by getting rid of unnecessary resorting codes. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1355128197-18193-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-10 17:29:55 +09:00

perf diff: Start moving to support matching more than two hists We want to match more than two hists, so that we can match more than two perf.data files and moreover, match hist_entries (buckets) in multiple events in a group. So the "baseline"/"leader" will instead of a ->pair pointer, use a list_head, that will link to the pairs and hists__match use it. Following that perf_evlist__link will link the hists in its evsel groups. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2kbmzepoi544ygj9godseqpv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-25 14:42:45 -02:00

perf hist: Use cached rbtrees At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something heavily required for histograms. Specifically, the following are converted to rb_root_cached, and users accordingly: hist::entries_in_array hist::entries_in hist::entries hist::entries_collapsed hist_entry::hroot_in hist_entry::hroot_out Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net [ Added some missing conversions to rb_first_cached() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2018-12-06 11:18:18 -08:00

perf hists: Rename hist_entry__free to __delete No logic changes, just to be consistent. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-f7n5y0mvk6gew5185h6fg316@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-19 12:31:40 -03:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf diff: Use llabs() with 64-bit values To fix these build errors on a debian mipsel cross build environment: builtin-diff.c: In function 'block_cycles_diff_cmp': builtin-diff.c:550:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value] 550 | l = labs(left->diff.cycles); | ^~~~ builtin-diff.c:551:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value] 551 | r = labs(right->diff.cycles); | ^~~~ Fixes: 99150a1faab2 ("perf diff: Use hists to manage basic blocks per symbol") Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-pn7szy5uw384ntjgk6zckh6a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-11-27 09:58:22 -03:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf block: Cleanup and refactor block info functions We have already implemented some block-info related functions. Now it's time to do some cleanup, refactoring and move the functions and structures to new block-info.h/block-info.c. v4: --- Move code for skipping column length calculation to patch: 'perf diff: Don't use hack to skip column length calculation' v3: --- 1. Rename the patch title 2. Rename from block.h/block.c to block-info.h/block-info.c 3. Move more common part to block-info, such as block_info__process_sym. 4. Remove the nasty hack for skipping calculation of column length Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-11-07 15:47:14 +08:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf diff: Use __block_info__cmp() to replace block_pair_cmp() 'perf diff' uses block_pair_cmp() to compare two blocks. But block_info__cmp() has the similar functionality and it's a bit more complete. This patch removes block_pair_cmp() and uses __block_info__cmp() instead. __block_info__cmp() is wrapped by block_info__cmp() and it doesn't receives a perf_hpp_fmt parameter. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200202141655.32053-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-02-02 22:16:53 +08:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf diff: Use __block_info__cmp() to replace block_pair_cmp() 'perf diff' uses block_pair_cmp() to compare two blocks. But block_info__cmp() has the similar functionality and it's a bit more complete. This patch removes block_pair_cmp() and uses __block_info__cmp() instead. __block_info__cmp() is wrapped by block_info__cmp() and it doesn't receives a perf_hpp_fmt parameter. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200202141655.32053-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-02-02 22:16:53 +08:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Use llabs() with 64-bit values To fix this build error on a debian mipsel cross build environment: builtin-diff.c: In function 'compute_cycles_diff': builtin-diff.c:649:10: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value] 649 | val = labs(pair->block_info->cycles_spark[i] - | ^~~~ Fixes: cebf7d51a6c3 ("perf diff: Report noisy for cycles diff") Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-pn7szy5uw384ntjgk6zckh6a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-11-27 09:58:22 -03:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf hist: Use cached rbtrees At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something heavily required for histograms. Specifically, the following are converted to rb_root_cached, and users accordingly: hist::entries_in_array hist::entries_in hist::entries hist::entries_collapsed hist_entry::hroot_in hist_entry::hroot_out Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net [ Added some missing conversions to rb_first_cached() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2018-12-06 11:18:18 -08:00

perf diff: Use internal rb tree for hists__precompute There's missing change for hists__precompute to iterate either entries_collapsed or entries_in tree. The change was initiated for hists_compute_resort function in commit: 66f97ed perf diff: Use internal rb tree for compute resort but was missing for hists__precompute function changes. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1355404152-16523-2-git-send-email-jolsa@redhat.com [ committer note: Reduce patch size, no functional change ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-13 14:08:59 +01:00

perf hists: Move sort__need_collapse into struct perf_hpp_list Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__need_collapse into struct perf_hpp_list. Adding hists__has macro to easily access this info perf struct hists object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-05-03 13:54:42 +02:00

perf diff: Use internal rb tree for hists__precompute There's missing change for hists__precompute to iterate either entries_collapsed or entries_in tree. The change was initiated for hists_compute_resort function in commit: 66f97ed perf diff: Use internal rb tree for compute resort but was missing for hists__precompute function changes. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1355404152-16523-2-git-send-email-jolsa@redhat.com [ committer note: Reduce patch size, no functional change ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-13 14:08:59 +01:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf hist: Use cached rbtrees At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something heavily required for histograms. Specifically, the following are converted to rb_root_cached, and users accordingly: hist::entries_in_array hist::entries_in hist::entries hist::entries_collapsed hist_entry::hroot_in hist_entry::hroot_out Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net [ Added some missing conversions to rb_first_cached() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2018-12-06 11:18:18 -08:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

2015-01-08 09:45:47 +09:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf diff: Use internal rb tree for hists__precompute There's missing change for hists__precompute to iterate either entries_collapsed or entries_in tree. The change was initiated for hists_compute_resort function in commit: 66f97ed perf diff: Use internal rb tree for compute resort but was missing for hists__precompute function changes. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1355404152-16523-2-git-send-email-jolsa@redhat.com [ committer note: Reduce patch size, no functional change ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-13 14:08:59 +01:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf block: Cleanup and refactor block info functions We have already implemented some block-info related functions. Now it's time to do some cleanup, refactoring and move the functions and structures to new block-info.h/block-info.c. v4: --- Move code for skipping column length calculation to patch: 'perf diff: Don't use hack to skip column length calculation' v3: --- 1. Rename the patch title 2. Rename from block.h/block.c to block-info.h/block-info.c 3. Move more common part to block-info, such as block_info__process_sym. 4. Remove the nasty hack for skipping calculation of column length Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-11-07 15:47:14 +08:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

2015-01-08 09:45:47 +09:00

2017-02-10 16:36:11 +09:00

2015-01-08 09:45:47 +09:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf block: Cleanup and refactor block info functions We have already implemented some block-info related functions. Now it's time to do some cleanup, refactoring and move the functions and structures to new block-info.h/block-info.c. v4: --- Move code for skipping column length calculation to patch: 'perf diff: Don't use hack to skip column length calculation' v3: --- 1. Rename the patch title 2. Rename from block.h/block.c to block-info.h/block-info.c 3. Move more common part to block-info, such as block_info__process_sym. 4. Remove the nasty hack for skipping calculation of column length Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-11-07 15:47:14 +08:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf diff: Don't use hack to skip column length calculation Previously we use a nasty hack to skip the hists__calc_col_len for block since this function is not very suitable for block column length calculation. This patch removes the hack code and add a check at the entry of hists__calc_col_len to skip for block case. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-11-07 15:47:13 +08:00

perf diff: Link same basic blocks among different data The target is to compare the performance difference (cycles diff) for the same basic blocks in different data files. The same basic block means same function, same start address and same end address. This patch finds the same basic blocks from different data files and link them together and resort by the cycles diff. v3: --- The block stuffs are maintained by new structure 'block_hist', so this patch is update accordingly. v2: --- Since now the basic block hists is changed to per symbol, the patch only links the basic block hists for the same symbol in different data files. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com [ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:02 +08:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

2015-01-08 09:45:47 +09:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

2017-02-10 16:36:11 +09:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

2015-01-08 09:45:47 +09:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

2015-01-08 09:45:47 +09:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

2017-02-10 16:36:11 +09:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf tools: Pass struct perf_hpp_fmt to its callbacks Currently ->cmp, ->collapse and ->sort callbacks doesn't pass corresponding fmt. But it'll be needed by upcoming changes in perf diff command. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org [ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:46 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf tools: Pass struct perf_hpp_fmt to its callbacks Currently ->cmp, ->collapse and ->sort callbacks doesn't pass corresponding fmt. But it'll be needed by upcoming changes in perf diff command. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org [ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:46 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

2015-01-08 09:45:47 +09:00

perf tools: Pass struct perf_hpp_fmt to its callbacks Currently ->cmp, ->collapse and ->sort callbacks doesn't pass corresponding fmt. But it'll be needed by upcoming changes in perf diff command. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org [ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:46 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

2015-01-08 09:45:47 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

2017-02-10 16:36:11 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

2015-01-08 09:45:47 +09:00

perf tools: Pass struct perf_hpp_fmt to its callbacks Currently ->cmp, ->collapse and ->sort callbacks doesn't pass corresponding fmt. But it'll be needed by upcoming changes in perf diff command. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org [ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:46 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

2015-01-08 09:45:47 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

2015-01-08 09:45:47 +09:00

perf tools: Pass struct perf_hpp_fmt to its callbacks Currently ->cmp, ->collapse and ->sort callbacks doesn't pass corresponding fmt. But it'll be needed by upcoming changes in perf diff command. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org [ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:46 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

2015-01-08 09:45:47 +09:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

2017-02-10 16:36:11 +09:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

2015-01-08 09:45:47 +09:00

perf diff: Get rid of hists__compute_resort() The hists__compute_resort() is to sort output fields based on the given field/criteria. This was done without the sort list but as we added the field to the sort list, we can do it with normal hists__output_resort() using the ->sort callback. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:30 +09:00

perf diff: Add option to sort entries based on diff computation Adding support to sort hist entries based on the outcome of selected computation. It's now possible to specify '+' as a first character of '-c' option value to make such sort. Example: $ perf diff -c ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc $ perf diff -c +ratio -b # Event 'cache-misses' # # Baseline Ratio Shared Object Symbol # ........ .............. ................. ................................ # 19.64% 0.69 [kernel.kallsyms] [k] clear_page 0.04% 0.20 [kernel.kallsyms] [k] kmem_cache_alloc 0.30% 0.17 [kernel.kallsyms] [k] mm_alloc Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:42 +02:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Add -q/--quiet option The -q/--quiet option is to suppress any message. Sometimes users just want to see the numbers and it can be used for that case. Committer notes: Before: # perf diff | head -10 Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-2646.map, continuing without symbols # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... .......................... ............................................ # 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 After: # perf diff -q | head -10 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 1.86% +0.95% [kernel.vmlinux] [k] update_blocked_averages 0.80% -0.70% [kernel.vmlinux] [k] native_sched_clock 0.74% -0.58% [kernel.vmlinux] [k] native_write_msr 0.76% -0.56% qemu-system-x86_64 [.] 0x00000000002395c0 +0.54% libpulsecommon-10.0.so [.] 0x000000000002d91b # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170217081742.17417-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-17 17:17:40 +09:00

perf hists: Clarify callchain disabling when available We want to allow having mixed events with/without callchains, not using a global flag to show callchains, but allowing supressing callchains when they are present. So invert the logic of the last parameter to hists__fprint() to that effect. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ohqyisr6qge79qa95ojslptx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2018-06-20 15:58:20 -03:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf diff: Display data file info ahead of the diff output Data files are referenced through the index of the file on the command line. Adding list of data files for each index to ease up navigation for user. It's displayed only if in verbose mode. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-dfjxa6n116ughjjxohpkuvi8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:56:03 +01:00

perf data: Add global path holder Add a 'path' member to 'struct perf_data'. It will keep the configured path for the data (const char *). The path in struct perf_data_file is now dynamically allocated (duped) from it. This scheme is useful/used in following patches where struct perf_data::path holds the 'configure' directory path and struct perf_data_file::path holds the allocated path for specific files. Also it actually makes the code little simpler. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org [ Fixup data-convert-bt.c missing conversion ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-02-21 10:41:30 +01:00

perf diff: Display data file info ahead of the diff output Data files are referenced through the index of the file on the command line. Adding list of data files for each index to ease up navigation for user. It's displayed only if in verbose mode. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-dfjxa6n116ughjjxohpkuvi8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:56:03 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

2009-12-14 20:09:31 -02:00

perf evlist: Rename struct perf_evlist to struct evlist Rename struct perf_evlist to struct evlist, so we don't have a name clash when we add struct perf_evlist in libperf. Committer notes: Added fixes to build on arm64, from Jiri and from me (tools/perf/util/cs-etm.c) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:52 +02:00

perf evsel: Rename struct perf_evsel to struct evsel Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:51 +02:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

2009-12-14 20:09:31 -02:00

perf evlist: Rename for_each() macros to for_each_entry() To match the semantics for list.h in the kernel, that are used to implement those macros. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-06-23 11:26:15 -03:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

2009-12-14 20:09:31 -02:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf evlist: Rename struct perf_evlist to struct evlist Rename struct perf_evlist to struct evlist, so we don't have a name clash when we add struct perf_evlist in libperf. Committer notes: Added fixes to build on arm64, from Jiri and from me (tools/perf/util/cs-etm.c) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:52 +02:00

perf evsel: Rename struct perf_evsel to struct evsel Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-07-21 13:23:51 +02:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

2009-12-14 20:09:31 -02:00

perf diff: Add -q/--quiet option The -q/--quiet option is to suppress any message. Sometimes users just want to see the numbers and it can be used for that case. Committer notes: Before: # perf diff | head -10 Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-2646.map, continuing without symbols # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... .......................... ............................................ # 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 After: # perf diff -q | head -10 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 1.86% +0.95% [kernel.vmlinux] [k] update_blocked_averages 0.80% -0.70% [kernel.vmlinux] [k] native_sched_clock 0.74% -0.58% [kernel.vmlinux] [k] native_write_msr 0.76% -0.56% qemu-system-x86_64 [.] 0x00000000002395c0 +0.54% libpulsecommon-10.0.so [.] 0x000000000002d91b # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170217081742.17417-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-17 17:17:40 +09:00

perf evsel: Rename *perf_evsel__*name() to *evsel__*name() As they are 'struct evsel' methods or related routines, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-04-29 16:07:09 -03:00

perf diff: Add -q/--quiet option The -q/--quiet option is to suppress any message. Sometimes users just want to see the numbers and it can be used for that case. Committer notes: Before: # perf diff | head -10 Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-2646.map, continuing without symbols # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... .......................... ............................................ # 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 After: # perf diff -q | head -10 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 1.86% +0.95% [kernel.vmlinux] [k] update_blocked_averages 0.80% -0.70% [kernel.vmlinux] [k] native_sched_clock 0.74% -0.58% [kernel.vmlinux] [k] native_write_msr 0.76% -0.56% qemu-system-x86_64 [.] 0x00000000002395c0 +0.54% libpulsecommon-10.0.so [.] 0x000000000002d91b # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170217081742.17417-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-17 17:17:40 +09:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf diff: Add -q/--quiet option The -q/--quiet option is to suppress any message. Sometimes users just want to see the numbers and it can be used for that case. Committer notes: Before: # perf diff | head -10 Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-2646.map, continuing without symbols # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... .......................... ............................................ # 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 After: # perf diff -q | head -10 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 1.86% +0.95% [kernel.vmlinux] [k] update_blocked_averages 0.80% -0.70% [kernel.vmlinux] [k] native_sched_clock 0.74% -0.58% [kernel.vmlinux] [k] native_write_msr 0.76% -0.56% qemu-system-x86_64 [.] 0x00000000002395c0 +0.54% libpulsecommon-10.0.so [.] 0x000000000002d91b # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170217081742.17417-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-17 17:17:40 +09:00

perf diff: Display data file info ahead of the diff output Data files are referenced through the index of the file on the command line. Adding list of data files for each index to ease up navigation for user. It's displayed only if in verbose mode. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-dfjxa6n116ughjjxohpkuvi8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:56:03 +01:00

perf callchain: Allow disabling call graphs per event This patch introduce "call-graph=no" to disable per-event callgraph. Here is an example. perf record -e 'cpu/cpu-cycles,call-graph=fp/,cpu/instructions,call-graph=no/' sleep 1 perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 6 of event 'cpu/cpu-cycles,call-graph=fp/' # Event count (approx.): 774218 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................ ........................................ # 61.94% 0.00% sleep [kernel.vmlinux] [k] entry_SYSCALL_64_fastpath | ---entry_SYSCALL_64_fastpath | |--97.30%-- __brk | --2.70%-- mmap64 _dl_check_map_versions _dl_check_all_versions 61.94% 0.00% sleep [kernel.vmlinux] [k] perf_event_mmap | ---perf_event_mmap | |--97.30%-- do_brk | sys_brk | entry_SYSCALL_64_fastpath | __brk | --2.70%-- mmap_region do_mmap_pgoff vm_mmap_pgoff sys_mmap_pgoff sys_mmap entry_SYSCALL_64_fastpath mmap64 _dl_check_map_versions _dl_check_all_versions ...... # Samples: 6 of event 'cpu/instructions,call-graph=no/' # Event count (approx.): 359692 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................ ................................. # 89.03% 0.00% sleep [unknown] [.] 0xffff6598ffff6598 89.03% 0.00% sleep ld-2.17.so [.] _dl_resolve_conflicts 89.03% 0.00% sleep [kernel.vmlinux] [k] page_fault Signed-off-by: Kan Liang <kan.liang@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1439289050-40510-2-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-08-11 06:30:48 -04:00

perf evsel: Rename *perf_evsel__*set_sample_*() to *evsel__*set_sample_*() As they are not 'struct evsel' methods, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-04-29 16:12:15 -03:00

perf callchain: Allow disabling call graphs per event This patch introduce "call-graph=no" to disable per-event callgraph. Here is an example. perf record -e 'cpu/cpu-cycles,call-graph=fp/,cpu/instructions,call-graph=no/' sleep 1 perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 6 of event 'cpu/cpu-cycles,call-graph=fp/' # Event count (approx.): 774218 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................ ........................................ # 61.94% 0.00% sleep [kernel.vmlinux] [k] entry_SYSCALL_64_fastpath | ---entry_SYSCALL_64_fastpath | |--97.30%-- __brk | --2.70%-- mmap64 _dl_check_map_versions _dl_check_all_versions 61.94% 0.00% sleep [kernel.vmlinux] [k] perf_event_mmap | ---perf_event_mmap | |--97.30%-- do_brk | sys_brk | entry_SYSCALL_64_fastpath | __brk | --2.70%-- mmap_region do_mmap_pgoff vm_mmap_pgoff sys_mmap_pgoff sys_mmap entry_SYSCALL_64_fastpath mmap64 _dl_check_map_versions _dl_check_all_versions ...... # Samples: 6 of event 'cpu/instructions,call-graph=no/' # Event count (approx.): 359692 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................ ................................. # 89.03% 0.00% sleep [unknown] [.] 0xffff6598ffff6598 89.03% 0.00% sleep ld-2.17.so [.] _dl_resolve_conflicts 89.03% 0.00% sleep [kernel.vmlinux] [k] page_fault Signed-off-by: Kan Liang <kan.liang@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1439289050-40510-2-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-08-11 06:30:48 -04:00

perf evsel: Add hists helper Not all tools need a hists instance per perf_evsel, so lets pave the way to remove evsel->hists while leaving a way to access the hists from a specially allocated evsel, one that comes with space at the end where lives the evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-09 13:13:41 -03:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

2020-10-09 10:28:45 +08:00

libperf: Move 'idx' from tools/perf to perf_evsel::idx Move evsel::idx to perf_evsel::idx, so we can move the group interface to libperf. Committer notes: Fixup evsel->idx usage in tools/perf/util/bpf_counter_cgroup.c, that appeared in my tree in my local tree. Also fixed up these: $ find tools/perf/ -name "*.[ch]" | xargs grep 'evsel->idx' tools/perf/ui/gtk/annotate.c: evsel->idx + i); tools/perf/ui/gtk/annotate.c: evsel->idx); $ That running 'make -C tools/perf build-test' caught. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210706151704.73662-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2021-07-06 17:16:59 +02:00

2020-10-09 10:28:45 +08:00

libperf: Move 'idx' from tools/perf to perf_evsel::idx Move evsel::idx to perf_evsel::idx, so we can move the group interface to libperf. Committer notes: Fixup evsel->idx usage in tools/perf/util/bpf_counter_cgroup.c, that appeared in my tree in my local tree. Also fixed up these: $ find tools/perf/ -name "*.[ch]" | xargs grep 'evsel->idx' tools/perf/ui/gtk/annotate.c: evsel->idx + i); tools/perf/ui/gtk/annotate.c: evsel->idx); $ That running 'make -C tools/perf build-test' caught. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210706151704.73662-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2021-07-06 17:16:59 +02:00

2020-10-09 10:28:45 +08:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

2020-10-09 10:28:45 +08:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf tools: Use zfree to help detect use after free bugs Several areas already used this technique, so do some audit to consistently use it elsewhere. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-9sbere0kkplwe45ak6rk4a1f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-27 16:55:14 -03:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf diff: Check if all data files with branch stacks We will expand perf diff to support diff cycles of individual programs blocks, so it requires all data files having branch stacks. This patch checks HEADER_BRANCH_STACK in header, and only set the flag has_br_stack when HEADER_BRANCH_STACK are set in all data files. v2: --- Move check_file_brstack() from __cmd_diff() to cmd_diff(). Because later patch will check flag 'has_br_stack' before ui_init(). Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:00 +08:00

perf tools: Remove repipe argument from perf_session__new() The repipe argument is only used by perf inject and the all others passes 'false'. Let's remove it from the function signature and add __perf_session__new() to be called from perf inject directly. This is a preparation of the change the pipe input/output. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org [ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2021-07-19 15:31:49 -07:00

perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-08-22 12:50:49 +05:30

perf diff: Check if all data files with branch stacks We will expand perf diff to support diff cycles of individual programs blocks, so it requires all data files having branch stacks. This patch checks HEADER_BRANCH_STACK in header, and only set the flag has_br_stack when HEADER_BRANCH_STACK are set in all data files. v2: --- Move check_file_brstack() from __cmd_diff() to cmd_diff(). Because later patch will check flag 'has_br_stack' before ui_init(). Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:00 +08:00

perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-08-22 12:50:49 +05:30

perf diff: Check if all data files with branch stacks We will expand perf diff to support diff cycles of individual programs blocks, so it requires all data files having branch stacks. This patch checks HEADER_BRANCH_STACK in header, and only set the flag has_br_stack when HEADER_BRANCH_STACK are set in all data files. v2: --- Move check_file_brstack() from __cmd_diff() to cmd_diff(). Because later patch will check flag 'has_br_stack' before ui_init(). Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:00 +08:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf tools: Remove repipe argument from perf_session__new() The repipe argument is only used by perf inject and the all others passes 'false'. Let's remove it from the function signature and add __perf_session__new() to be called from perf inject directly. This is a preparation of the change the pipe input/output. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org [ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2021-07-19 15:31:49 -07:00

perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-08-22 12:50:49 +05:30

perf data: Add global path holder Add a 'path' member to 'struct perf_data'. It will keep the configured path for the data (const char *). The path in struct perf_data_file is now dynamically allocated (duped) from it. This scheme is useful/used in following patches where struct perf_data::path holds the 'configure' directory path and struct perf_data_file::path holds the allocated path for specific files. Also it actually makes the code little simpler. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org [ Fixup data-convert-bt.c missing conversion ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-02-21 10:41:30 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf diff: Support --cpu filter option To improve 'perf diff', implement a --cpu filter option. Multiple CPUs can be provided as a comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. Default is to report samples on all CPUs. For example, perf diff --cpu 0,1 It only diff the samples for CPU0 and CPU1. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:42 +08:00

perf ordered_events: Shorten function signatures By keeping pointers to machines, evlist and tool in ordered_events. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-0c6huyaf59mqtm2ek9pmposl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-03-03 11:58:45 -03:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf data: Add global path holder Add a 'path' member to 'struct perf_data'. It will keep the configured path for the data (const char *). The path in struct perf_data_file is now dynamically allocated (duped) from it. This scheme is useful/used in following patches where struct perf_data::path holds the 'configure' directory path and struct perf_data_file::path holds the allocated path for specific files. Also it actually makes the code little simpler. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org [ Fixup data-convert-bt.c missing conversion ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-02-21 10:41:30 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf evlist: Use the right prefix for 'struct evlist' diff methods perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-11-30 15:18:48 -03:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

2020-10-09 10:28:45 +08:00

perf diff: Fix error return value in __cmd_diff() An appropriate return value should be set on the failed path. Fixes: 2a09a84c720b436a ("perf diff: Support hot streams comparison") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201124103652.438-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-11-24 18:36:52 +08:00

2020-10-09 10:28:45 +08:00

perf diff: Fix error return value in __cmd_diff() An appropriate return value should be set on the failed path. Fixes: 2a09a84c720b436a ("perf diff: Support hot streams comparison") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201124103652.438-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-11-24 18:36:52 +08:00

2020-10-09 10:28:45 +08:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

2020-10-09 10:28:45 +08:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Don't crash on freeing errno-session on the error path __cmd_diff() sets result of perf_session__new() to d->session. In case of failure, it's errno and perf-diff may crash with: failed to open perf.data: Permission denied Failed to open perf.data Segmentation fault (core dumped) From the coredump: 0 0x00005569a62b5955 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2681 1 0x00005569a626b37d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:295 2 perf_session__delete (session=0xffffffffffffffff) at util/session.c:291 3 0x00005569a618008a in __cmd_diff () at builtin-diff.c:1239 4 cmd_diff (argc=<optimized out>, argv=<optimized out>) at builtin-diff.c:2011 [..] Funny enough, it won't always crash. For me it crashes only if failed file is second in cmd-line: the reason is that cmd_diff() check files for branch-stacks [in check_file_brstack()] and if the first file doesn't have brstacks, it doesn't proceed to try open other files from cmd-line. Check d->session before calling perf_session__delete(). Another solution would be assigning to temporary variable, checking it, but I find it easier to follow with IS_ERR() check in the same function. After some time it's still obvious why the check is needed, and with temp variable it's possible to make the same mistake. Committer testing: $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf diff failed to open perf.data.old: No such file or directory Failed to open perf.data.old $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf diff # Event 'cycles:u' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .......................... # 0.92% +87.66% [unknown] [k] 0xffffffff8825de16 11.39% +0.04% ld-2.32.so [.] __GI___tunables_init 87.70% ld-2.32.so [.] _dl_check_map_versions $ sudo chown root:root perf.data [sudo] password for acme: $ perf diff failed to open perf.data: Permission denied Failed to open perf.data Segmentation fault (core dumped) $ After the patch: $ perf diff failed to open perf.data: Permission denied Failed to open perf.data $ Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dmitry safonov <dima@arista.com> Link: http://lore.kernel.org/lkml/20210302023533.1572231-1-dima@arista.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2021-03-02 02:35:33 +00:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Make diff command work with evsel hists Putting 'perf diff' command back on track with the 'latest' evsel hists changes. Each evsel has its own 'hists' object gathering stats for the particular event. While currently counts are accumulated for the whole session regardless of the events diversification within compared sessions. The 'perf diff' command now outputs all matching events within compared sessions (with event name specified). The per event diff output stays the same. $ ./perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +15.14% [kernel.kallsyms] [k] __wake_up 0.00% +13.38% [kernel.kallsyms] [k] ext4fs_dirhash ... SNIP 0.00% +0.42% [kernel.kallsyms] [k] local_clock 0.17% -0.05% [kernel.kallsyms] [k] native_write_msr_safe # Event 'faults' # # Baseline Delta Shared Object Symbol # ........ .......... ................. .............................. # 0.00% +79.12% ld-2.15.so [.] _dl_relocate_object 0.00% +11.62% ld-2.15.so [.] openaux Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-09-06 17:46:55 +02:00

perf diff: Fix support for all --sort combinations When we finish creating the hist_entries we _already_ have them sorted "by name", in fact by what is in --sort, that is exactly how we can find the pairs in perf_session__match_hists as 'comm', 'dso' & 'symbol' all are strings we need to find the matches in the baseline session. So only do the sort by hits followed by a resort by --sort if we need to find the position for shwowing the --displacement of hist entries. Now all these modes work correctly: Example is a simple 'perf record -f find / > /dev/null' ran twice then followed by the following commands: $ perf diff -f --sort comm # Baseline Delta Command # ........ .......... ....... # 0.00% +100.00% find $ perf diff -f --sort dso # Baseline Delta Shared Object # ........ .......... .................. # 59.97% -0.44% [kernel] 21.17% +0.28% libc-2.5.so 18.49% +0.16% [ext3] 0.37% find $ perf diff -f --sort symbol | head -8 # Baseline Delta Symbol # ........ .......... ...... # 6.21% +0.36% [k] ext3fs_dirhash 3.43% +0.41% [.] __GI_strlen 3.53% +0.16% [k] __kmalloc 3.17% +0.49% [k] system_call 3.06% +0.37% [k] ext3_htree_store_dirent $ perf diff -f --sort dso,symbol | head -8 # Baseline Delta Shared Object Symbol # ........ .......... .................. ...... # 6.21% +0.36% [ext3] [k] ext3fs_dirhash 3.43% +0.41% libc-2.5.so [.] __GI_strlen 3.53% +0.16% [kernel] [k] __kmalloc 3.17% +0.49% [kernel] [k] system_call 3.06% +0.37% [ext3] [k] ext3_htree_store_dirent $ And we don't have to do two expensive resorts in the common, non --displacement case. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1262047716-23171-5-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-28 22:48:36 -02:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

2009-12-14 20:09:31 -02:00

perf diff: Fix usage array, it must end with a NULL entry Fixing this: [acme@doppio linux-2.6-tip]$ perf diff --hell Error: unknown option `hell' usage: perf diff [<options>] [old_file] [new_file] Segmentation fault [acme@doppio linux-2.6-tip]$ Also go over the other such arrays to check if they all were OK, they are, but there were some minor changes to do like making one static and renaming another to match the command it refers to. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261161358-23959-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-18 16:35:58 -02:00

2009-12-14 20:09:31 -02:00

perf diff: Fix usage array, it must end with a NULL entry Fixing this: [acme@doppio linux-2.6-tip]$ perf diff --hell Error: unknown option `hell' usage: perf diff [<options>] [old_file] [new_file] Segmentation fault [acme@doppio linux-2.6-tip]$ Also go over the other such arrays to check if they all were OK, they are, but there were some minor changes to do like making one static and renaming another to match the command it refers to. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261161358-23959-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-18 16:35:58 -02:00

2009-12-14 20:09:31 -02:00

perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2010-04-13 18:37:33 +10:00

2009-12-14 20:09:31 -02:00

perf tools: Make quiet mode consistent between tools [ Upstream commit a527c2c1e2d43e9f145f5d0c5d6ac0bdf5220e22 ] Use the global quiet variable everywhere so that all tools hide warnings in quiet mode and update the documentation to reflect this. 'perf probe' claimed that errors are not printed in quiet mode but I don't see this so remove it from the docs. Signed-off-by: James Clark <james.clark@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221018094137.783081-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Stable-dep-of: 8b269b755512 ("perf probe: Check -v and -q options in the right place") Signed-off-by: Sasha Levin <sashal@kernel.org>

2022-10-18 10:41:36 +01:00

perf diff: Add -b option for perf diff to display paired entries only Adding -b option to perf diff command to display only entries with match in the baseline. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:40 +02:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Add -p option to display period values for hist entries Adding -p option to show period values for both compared hist entries. Showing hist column PERF_HPP__PERIOD and newly added hist column PERF_HPP__PERIOD_BASELINE. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-6-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:44 +02:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

2009-12-14 20:09:31 -02:00

perf diff: Add kallsyms option Required for off-box analysis to convert kernel addresses. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1427212317-7018-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-03-24 09:51:57 -06:00

2009-12-14 20:09:31 -02:00

perf symbols: Move symbol filtering to event__preprocess_sample() So that --dsos, --comm, --symbols can bem used in more tools, like in perf diff: $ perf record -f find / > /dev/null $ perf record -f find / > /dev/null $ perf diff --dsos /lib64/libc-2.10.1.so | head -5 1 +22392124 /lib64/libc-2.10.1.so _IO_vfprintf_internal 2 +6410655 /lib64/libc-2.10.1.so __GI_memmove 3 +1 +9192692 /lib64/libc-2.10.1.so _int_malloc 4 -1 -15158605 /lib64/libc-2.10.1.so _int_free 5 +45669 /lib64/libc-2.10.1.so _IO_new_file_xsputn $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260914682-29652-3-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-15 20:04:41 -02:00

perf diff: Use perf_session__fprintf_hists just like 'perf record' That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-16 13:49:27 -02:00

perf tools: Allow hpp fields to be sort keys Add overhead{,_sys,_us,_guest_sys,_guest_us}, sample and period sort keys so that they can be selected with --sort/-s option. $ perf report -s period,comm --stdio ... # Overhead Period Command # ........ ............ ............... # 47.06% 152 swapper 13.93% 45 qemu-system-arm 12.38% 40 synergys 3.72% 12 firefox 2.48% 8 xchat Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1400480762-22852-9-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>

2014-03-04 09:06:42 +09:00

perf tools: Don't allow empty argument for field-separator Both 'perf diff' and 'perf mem' have 'field-separator' option, which causes segfault if passed with empty string. This patch uses previously introduced 'OPT_STRING_NOEMPTY' option macro to prevent fault. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: pi3orama@163.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1426820272-23302-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-03-20 02:57:52 +00:00

perf diff: Use perf_session__fprintf_hists just like 'perf record' That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-16 13:49:27 -02:00

perf tools: Set buildid dir under symfs when --symfs is provided This patch moves the reference of buildid dir to 'symfs/.debug' and skips the local buildid dir when '--symfs' is given, so that every single file opened by perf is relative to symfs directory now. Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1463658462-85131-2-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-05-19 11:47:37 +00:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf diff: Add --percentage option The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only. For more information, please see previous commit same thing done to "perf report". Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-5-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>

2014-02-07 12:06:07 +09:00

perf diff: Support --time filter option To improve 'perf diff', implement a --time filter option to diff the samples within given time window. It supports time percent with multiple time ranges. The time string format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. For example: Select the second 10% time slice to diff: perf diff --time 10%/2 Select from 0% to 10% time slice to diff: perf diff --time 0%-10% Select the first and the second 10% time slices to diff: perf diff --time 10%/1,10%/2 Select from 0% to 10% and 30% to 40% slices to diff: perf diff --time 0%-10%,30%-40% It also supports analysing samples within a given time window <start>,<stop>. Times have the format seconds.microseconds. If 'start' is not given (i.e., time string is ',x.y') then analysis starts at the beginning of the file. If the stop time is not given (i.e, time string is 'x.y,') then analysis goes to end of file. Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for different perf.data files. For example, we get the timestamp information from perf script. perf script -i perf.data.old mgen 13940 [000] 3946.361400: ... perf script -i perf.data mgen 13940 [000] 3971.150589 ... perf diff --time 3946.361400,:3971.150589, It analyzes the perf.data.old from the timestamp 3946.361400 to the end of perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the end of perf.data. v4: --- Update abstime_str_dup(), let it return error if strdup is failed, and update __cmd_diff() accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:41 +08:00

perf diff: Support --cpu filter option To improve 'perf diff', implement a --cpu filter option. Multiple CPUs can be provided as a comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. Default is to report samples on all CPUs. For example, perf diff --cpu 0,1 It only diff the samples for CPU0 and CPU1. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:42 +08:00

perf diff: Support --pid/--tid filter options Using the existing symbol_conf.pid_list_str and symbol_conf.tid_list_str logic. For example: perf diff --tid 13965 It'll only diff the samples for thread 13965. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551791143-10334-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-03-05 21:05:43 +08:00

2020-10-09 10:28:45 +08:00

2009-12-14 20:09:31 -02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf tool: Add hpp interface to enable/disable hpp column Adding perf_hpp__column_enable function to enable/disable hists column and removing diff command specific stuff 'need_pair and show_displacement' from hpp code. The diff command now enables/disables columns separately according to the user arguments. This will be helpful in future patches where more columns are added into diff output. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-6-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-04 21:49:39 +09:00

perf diff: Add --percentage option The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only. For more information, please see previous commit same thing done to "perf report". Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-5-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>

2014-02-07 12:06:07 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

2020-02-23 11:34:49 -08:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Color the Weighted Diff column In $ perf diff -c wdiff:M,N color the numbers in the Weighted Diff column using color_snprintf(), picking the colors using get_percent_color(). Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388390555-10808-1-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:32:35 +05:30

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

2014-12-27 14:06:31 +09:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Color the Ratio column In $ perf diff -c ratio color the Ratio column using value_color_snprintf(), a new function that operates exactly like percent_color_snprintf(). At first glance, it looks like percent_color_snprintf() can be turned into a non-variadic function simplifying things; however, 53805ec (perf tools: Remove cast of non-variadic function to variadic, 2013-10-31) explains why it needs to be a variadic function. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-4-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:20 +05:30

perf diff: Color the Weighted Diff column In $ perf diff -c wdiff:M,N color the numbers in the Weighted Diff column using color_snprintf(), picking the colors using get_percent_color(). Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388390555-10808-1-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:32:35 +05:30

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

2014-12-27 14:06:31 +09:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Color the Ratio column In $ perf diff -c ratio color the Ratio column using value_color_snprintf(), a new function that operates exactly like percent_color_snprintf(). At first glance, it looks like percent_color_snprintf() can be turned into a non-variadic function simplifying things; however, 53805ec (perf tools: Remove cast of non-variadic function to variadic, 2013-10-31) explains why it needs to be a variadic function. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-4-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:20 +05:30

perf diff: Color the Weighted Diff column In $ perf diff -c wdiff:M,N color the numbers in the Weighted Diff column using color_snprintf(), picking the colors using get_percent_color(). Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388390555-10808-1-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:32:35 +05:30

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Add weighted diff computation way to compare hist entries Adding 'wdiff' as new computation way to compare hist entries. If specified the 'Weighted diff' column is displayed with value 'd' computed as: d = B->period * WEIGHT-A - A->period * WEIGHT-B - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option behind ':' separator like '-c wdiff:1,2'. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:43 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2017-02-10 16:36:11 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2014-12-27 14:06:31 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2014-12-27 14:06:31 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2014-12-27 14:06:31 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2014-12-27 14:06:31 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

2014-12-27 14:06:31 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Making compute functions static All compute functions are now local to the diff command, making them static. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-mpmm8l71mnlp7139voba3aak@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-21 23:31:51 +02:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Add ratio computation way to compare hist entries Adding -c option to select computation method with the current 'Delta' computation as default. Current possible values are of this option are: 'delta' and 'ratio'. Adding 'ratio' as new computation way to compare hist entries. If specified the 'Ratio' column is displayed with value 'r' computed as: r = A->period / B->period with: - A/B being matching hist entry from first/second file specified (or perf.data/perf.data.old) respectively. - period being the hist entry period value Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:41 +02:00

perf tools: Remove unneeded semicolons Fixes coccicheck warnings: tools/perf/builtin-diff.c:1565:2-3: Unneeded semicolon tools/perf/builtin-lock.c:778:2-3: Unneeded semicolon tools/perf/builtin-mem.c:126:2-3: Unneeded semicolon tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c:555:2-3: Unneeded semicolon tools/perf/util/ordered-events.c:317:2-3: Unneeded semicolon tools/perf/util/synthetic-events.c:1131:2-3: Unneeded semicolon tools/perf/util/trace-event-read.c:78:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1588065523-71423-1-git-send-email-zou_wei@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2020-04-28 17:18:43 +08:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf ui hists: Pass evsel to hpp->header/width functions explicitly Those functions need evsel to investigate event group and it's passed via hpp->ptr. However as it can be missed easily so it's better to pass it via an argument IMHO. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1394437440-11609-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-03-10 16:43:52 +09:00

perf hists: Add line argument into perf_hpp_fmt's header callback Adding line argument into perf_hpp_fmt's header callback to be able to request specific header line. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-08-07 17:28:27 +02:00

perf hists: Add support for header span Add span argument for header callback function. The handling of this argument is completely in the hands of the callback. The only thing the caller ensures is it's zeroed on the beginning. Omitting span skipping in hierarchy headers and gtk code. The c2c code use this to span header lines based on the entries span configuration. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-08-07 17:28:30 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf ui hists: Pass evsel to hpp->header/width functions explicitly Those functions need evsel to investigate event group and it's passed via hpp->ptr. However as it can be missed easily so it's better to pass it via an argument IMHO. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1394437440-11609-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-03-10 16:43:52 +09:00

perf hists: Replace perf_evsel arg perf_hpp_fmt's width callback Replacing perf_evsel arg perf_hpp_fmt's width callback with hists object. This will be helpful in future for non evsel related hist browsers. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1465928361-2442-11-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2016-06-14 20:19:20 +02:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Color the Ratio column In $ perf diff -c ratio color the Ratio column using value_color_snprintf(), a new function that operates exactly like percent_color_snprintf(). At first glance, it looks like percent_color_snprintf() can be turned into a non-variadic function simplifying things; however, 53805ec (perf tools: Remove cast of non-variadic function to variadic, 2013-10-31) explains why it needs to be a variadic function. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-4-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:20 +05:30

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf diff: Color the Ratio column In $ perf diff -c ratio color the Ratio column using value_color_snprintf(), a new function that operates exactly like percent_color_snprintf(). At first glance, it looks like percent_color_snprintf() can be turned into a non-variadic function simplifying things; however, 53805ec (perf tools: Remove cast of non-variadic function to variadic, 2013-10-31) explains why it needs to be a variadic function. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-4-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:20 +05:30

perf diff: Color the Weighted Diff column In $ perf diff -c wdiff:M,N color the numbers in the Weighted Diff column using color_snprintf(), picking the colors using get_percent_color(). Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388390555-10808-1-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:32:35 +05:30

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf diff: Color the Weighted Diff column In $ perf diff -c wdiff:M,N color the numbers in the Weighted Diff column using color_snprintf(), picking the colors using get_percent_color(). Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388390555-10808-1-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:32:35 +05:30

2017-02-10 16:36:11 +09:00

perf diff: Print the basic block cycles diff $ perf record -b ./div $ perf record -b ./div Following is the default perf diff output $ perf diff # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .................................. # 48.75% +0.33% div [.] main 8.21% -0.20% div [.] compute_flag 19.02% -0.12% libc-2.23.so [.] __random_r 16.17% -0.09% libc-2.23.so [.] __random 2.27% -0.03% div [.] rand@plt +0.02% [i915] [k] gen8_irq_handler 5.52% +0.02% libc-2.23.so [.] rand This patch creates a new computation selection 'cycles'. $ perf diff -c cycles # Event 'cycles' # # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ ....................................... ......................................... # 48.75% [div.c:42 -> div.c:45] 147 div [.] main 48.75% [div.c:31 -> div.c:40] 4 div [.] main 48.75% [div.c:40 -> div.c:40] 0 div [.] main 48.75% [div.c:42 -> div.c:42] 0 div [.] main 48.75% [div.c:42 -> div.c:44] 0 div [.] main 19.02% [random_r.c:357 -> random_r.c:360] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:373] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:376] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:380] 0 libc-2.23.so [.] __random_r 19.02% [random_r.c:357 -> random_r.c:392] 0 libc-2.23.so [.] __random_r 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:295] 0 libc-2.23.so [.] __random 16.17% [random.c:288 -> random.c:297] 0 libc-2.23.so [.] __random 16.17% [random.c:291 -> random.c:291] 0 libc-2.23.so [.] __random 16.17% [random.c:293 -> random.c:293] 0 libc-2.23.so [.] __random 8.21% [div.c:22 -> div.c:22] 148 div [.] compute_flag 8.21% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.21% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.52% [rand.c:26 -> rand.c:27] 0 libc-2.23.so [.] rand 5.52% [rand.c:26 -> rand.c:28] 0 libc-2.23.so [.] rand 2.27% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.01% [entry_64.S:694 -> entry_64.S:694] 16 [vmlinux] [k] native_irq_return_iret 0.00% [fair.c:7676 -> fair.c:7665] 162 [vmlinux] [k] update_blocked_averages "[Program Block Range]" indicates the range of program basic block (start -> end). If we can find the source line it prints the source line otherwise it prints the symbol+offset instead. v4: --- Use source lines or symbol+offset to indicate the basic block. It should be easier to understand. v3: --- Cast 'struct hist_entry' to 'struct block_hist' in hist_entry__block_fprintf. Use symbol_conf.report_block to check if executing hist_entry__block_fprintf. v2: --- Keep standard perf diff format and display the 'Baseline' and 'Shared Object'. The output is sorted by "Baseline" and the basic blocks in the same function are sorted by cycles diff. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-7-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:03 +08:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf diff: Color the Delta column Color the numbers in the Delta column using percent_color_snprintf(). Generalize the coloring function so that we can accommodate all three comparison methods in future patches: delta, ratio, and wdiff. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-30 13:04:19 +05:30

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Fix to sort by baseline field by default The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-12-27 14:06:29 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

perf diff: Move diff related columns into diff command Moving diff related columns into diff command, because they are not used by any other command. Also moving the column entry functions under generic one with baseline as an exception. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-v58qfl75xkqojz54h1v5fy6p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-03 20:08:34 +01:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf tools: Fix various typos in comments Fix ~124 single-word typos and a few spelling errors in the perf tooling code, accumulated over the years. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210321113734.GA248990@gmail.com Link: http://lore.kernel.org/lkml/20210323160915.GA61903@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2021-03-23 17:09:15 +01:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf tool: Add hpp interface to enable/disable hpp column Adding perf_hpp__column_enable function to enable/disable hists column and removing diff command specific stuff 'need_pair and show_displacement' from hpp code. The diff command now enables/disables columns separately according to the user arguments. This will be helpful in future patches where more columns are added into diff output. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-6-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-04 21:49:39 +09:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Add -F option to display formula for computation Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:45 +02:00

perf diff: Move columns into struct data__file Another step towards multiple data files support. Having columns definition within struct data__file force each data file having its own columns. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-lnfqj7k7fqw8bz07pupi5464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 21:57:04 +01:00

perf diff: Add -p option to display period values for hist entries Adding -p option to show period values for both compared hist entries. Showing hist column PERF_HPP__PERIOD and newly added hist column PERF_HPP__PERIOD_BASELINE. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-6-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-05 16:44:44 +02:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

2017-02-10 16:36:11 +09:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

perf diff: Fix -o/--order option behavior (again) Commit 21e6d8428664 ("perf diff: Use perf_hpp__register_sort_field interface") changed list_add() to perf_hpp__register_sort_field(). This resulted in a behavior change since the field was added to the tail instead of the head. So the -o option is mostly ignored due to its order in the list. This patch fixes it by adding perf_hpp__prepend_sort_field(). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 21e6d8428664 ("perf diff: Use perf_hpp__register_sort_field interface") Link: http://lkml.kernel.org/r/20170118051457.30946-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-01-18 14:14:57 +09:00

perf diff: Fix -o/--order option behavior The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-01-08 09:45:48 +09:00

perf tool: Add hpp interface to enable/disable hpp column Adding perf_hpp__column_enable function to enable/disable hists column and removing diff command specific stuff 'need_pair and show_displacement' from hpp code. The diff command now enables/disables columns separately according to the user arguments. This will be helpful in future patches where more columns are added into diff output. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-6-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-04 21:49:39 +09:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

2009-12-14 20:09:31 -02:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

2009-12-14 20:09:31 -02:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Change diff command to work over multiple data files Adding diff command the flexibility to specify multiple data files on input. If not input file is given the standard behaviour stands and diff inspects 'perf.data' and 'perf.data.old' files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8j3xer54ltvs76t0fh01gcvu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-12-01 22:00:00 +01:00

perf kvm: Make perf kvm diff support --guestmount. In manpage of perf-kvm, --guestmount is supported by diff command, but it does not work well. This patch change the extend the checking in buildid-diff from guestkallsyms or guestmodules to perf_guest. Then this checking can cover the all cases perf kvm is used for. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Link: http://lkml.kernel.org/r/72857ed89642e0633f5e88f7e7abbc9645359e8e.1386368672.git.yangds.fnst@cn.fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-12-06 17:25:52 -05:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

2009-12-14 20:09:31 -02:00

perf diff: Add generic order option for compute sorting Adding option 'o' to allow sorting based on the input file number. By default (without -o option) the output is sorted on baseline. Also removing '+' sorting support from -c option, because it's not needed anymore. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-11-25 23:10:20 +01:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf tools: Rename struct perf_data_file to perf_data Rename struct perf_data_file to perf_data, because we will add the possibility to have multiple files under perf.data, so the 'perf_data' name fits better. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Changbin Du <changbin.du@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org [ Fixup recent changes in 'perf script --per-event-dump' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-01-23 22:07:59 +01:00

perf tools: Add data object to handle perf data file This patch is adding 'struct perf_data_file' object as a placeholder for all attributes regarding perf.data file handling. Changing perf_session__new to take it as an argument. The rest of the functionality will be added later to keep this change simple enough, because all the places using perf_session are changed now. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381847254-28809-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-10-15 16:27:32 +02:00

perf data: Add global path holder Add a 'path' member to 'struct perf_data'. It will keep the configured path for the data (const char *). The path in struct perf_data_file is now dynamically allocated (duped) from it. This scheme is useful/used in following patches where struct perf_data::path holds the 'configure' directory path and struct perf_data_file::path holds the allocated path for specific files. Also it actually makes the code little simpler. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org [ Fixup data-convert-bt.c missing conversion ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-02-21 10:41:30 +01:00

perf tools: Add data object to handle perf data file This patch is adding 'struct perf_data_file' object as a placeholder for all attributes regarding perf.data file handling. Changing perf_session__new to take it as an argument. The rest of the functionality will be added later to keep this change simple enough, because all the places using perf_session are changed now. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381847254-28809-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-10-15 16:27:32 +02:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Add diff.order config option In many cases, I need to look at differences between two data so I often used the -o option to sort the result base on the difference first. It'd be nice to have a config option to set it by default. The diff.order config option is to set the default value of -o/--order option. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/20170210073614.24584-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-10 16:36:12 +09:00

perf config: Do not die when parsing u64 or int config values Just warn the user and ignore those values. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-tbf60nj3ierm6hrkhpothymx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-06-27 11:44:58 -03:00

perf diff: Add diff.order config option In many cases, I need to look at differences between two data so I often used the -o option to sort the result base on the difference first. It'd be nice to have a config option to set it by default. The diff.order config option is to set the default value of -o/--order option. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/20170210073614.24584-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-10 16:36:12 +09:00

perf diff: Add diff.compute config option The diff.compute config variable is to set the default compute method of perf diff command (-c option). Possible values 'delta' (default), 'delta-abs', 'ratio' and 'wdiff'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/20170210073614.24584-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-10 16:36:13 +09:00

perf diff: Add diff.order config option In many cases, I need to look at differences between two data so I often used the -o option to sort the result base on the difference first. It'd be nice to have a config option to set it by default. The diff.order config option is to set the default value of -o/--order option. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/20170210073614.24584-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-10 16:36:12 +09:00

perf tools: Remove unused 'prefix' from builtin functions We got it from the git sources but never used it for anything, with the place where this would be somehow used remaining: static int run_builtin(struct cmd_struct *p, int argc, const char **argv) { prefix = NULL; if (p->option & RUN_SETUP) prefix = NULL; /* setup_perf_directory(); */ Ditch it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-03-27 11:47:20 -03:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Add missing hists__init() call at tool start It also uses hists/hist_entries, hists__init() should be called before creating any evsels. Otherwise no extra space will be allocated per perf_evsel nor this space will be initialized when allocating a new perf_evsel instance, resulting in reads/writes to non allocated space, oops. Fix it. Signed-off-by: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1414004561-22096-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-10-22 15:02:41 -04:00

perf diff: Add diff.order config option In many cases, I need to look at differences between two data so I often used the -o option to sort the result base on the difference first. It'd be nice to have a config option to set it by default. The diff.order config option is to set the default value of -o/--order option. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/20170210073614.24584-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-10 16:36:12 +09:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Add -q/--quiet option The -q/--quiet option is to suppress any message. Sometimes users just want to see the numbers and it can be used for that case. Committer notes: Before: # perf diff | head -10 Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-6678.map, continuing without symbols Failed to open /tmp/perf-2646.map, continuing without symbols # Event 'cycles' # # Baseline Delta Abs Shared Object Symbol # ........ ......... .......................... ............................................ # 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 After: # perf diff -q | head -10 5.36% -1.76% [kernel.vmlinux] [k] intel_idle 2.80% +1.48% firefox [.] 0x00000000000101fe 57.12% -1.25% libxul.so [.] 0x00000000009bea92 1.36% -1.11% [kernel.vmlinux] [k] __schedule 4.26% -1.00% perf-6678.map [.] 0x00007fac4b0e9320 1.86% +0.95% [kernel.vmlinux] [k] update_blocked_averages 0.80% -0.70% [kernel.vmlinux] [k] native_sched_clock 0.74% -0.58% [kernel.vmlinux] [k] native_write_msr 0.76% -0.56% qemu-system-x86_64 [.] 0x00000000002395c0 +0.54% libpulsecommon-10.0.so [.] 0x000000000002d91b # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170217081742.17417-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2017-02-17 17:17:40 +09:00

perf diff: Report noisy for cycles diff This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-09-25 09:14:46 +08:00

2020-10-09 10:28:45 +08:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2014-08-12 15:40:45 +09:00

perf symbols: Adopt the strlists for dso, comm Will be used in perf diff too. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260914682-29652-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-15 20:04:40 -02:00

perf diff: Introducing diff_data object to hold files Introducing struct diff_data to hold data file specifics. It will be handy when dealing with more than 2 data files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-981q265sf6h05zuu8fnvw842@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-03-25 00:02:01 +01:00

perf diff: Check if all data files with branch stacks We will expand perf diff to support diff cycles of individual programs blocks, so it requires all data files having branch stacks. This patch checks HEADER_BRANCH_STACK in header, and only set the flag has_br_stack when HEADER_BRANCH_STACK are set in all data files. v2: --- Move check_file_brstack() from __cmd_diff() to cmd_diff(). Because later patch will check flag 'has_br_stack' before ui_init(). Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:00 +08:00

2020-10-09 10:28:45 +08:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

2020-10-09 10:28:45 +08:00

perf diff: Use hists to manage basic blocks per symbol The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2019-06-28 17:23:01 +08:00

2020-10-09 10:28:45 +08:00

perf tool: Add hpp interface to enable/disable hpp column Adding perf_hpp__column_enable function to enable/disable hists column and removing diff command specific stuff 'need_pair and show_displacement' from hpp code. The diff command now enables/disables columns separately according to the user arguments. This will be helpful in future patches where more columns are added into diff output. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-6-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2012-10-04 21:49:39 +09:00

2020-10-09 10:28:45 +08:00

perf tools: Consolidate management of default sort orders The perf uses different default sort orders for different use-cases, and this was scattered throughout the code. Add get_default_sort_ order() function to handle this and change initial value of sort_order to NULL to distinguish it from user-given one. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1400480762-22852-10-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>

2014-03-18 11:31:39 +09:00

perf tools: Pass evlist to setup_sorting() This is a preparation to support dynamic sort keys for tracepoint events. Dynamic sort keys can be created for specific fields in trace events so it needs the event information. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-5-git-send-email-namhyung@kernel.org [ Moving the evlist creation earlier in top was split to a previous patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2015-12-23 02:07:01 +09:00

perf sort: Make setup_sorting returns an error code Currently the setup_sorting() is called for parsing sort keys and exits if it failed to add the sort key. As it's included in libperf it'd be better returning an error code rather than exiting application inside of the library. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1360130237-9963-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-02-06 14:57:16 +09:00

2009-12-14 20:09:31 -02:00

perf diff: Use perf_session__fprintf_hists just like 'perf record' That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-16 13:49:27 -02:00

perf sort: Consolidate sort_entry__setup_elide() The same code was duplicate to places, factor them out to common sort__setup_elide(). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1364991979-3008-11-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

2013-04-03 21:26:19 +09:00

perf diff: Use perf_session__fprintf_hists just like 'perf record' That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-12-16 13:49:27 -02:00

2009-12-14 20:09:31 -02:00

2013 lines 46 KiB Raw Permalink Normal View History

2013 lines

46 KiB

Raw Permalink Normal View History