2018-09-12 09:16:07 +08:00
|
|
|
|
2012-11-29 13:28:09 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: introduce memalloc_retry_wait()
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 14:07:14 -08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
2012-12-19 22:19:30 +01:00
|
|
|
|
2015-02-22 08:58:50 -08:00
|
|
|
|
2017-02-02 19:15:33 +01:00
|
|
|
|
2020-05-23 09:30:11 +02:00
|
|
|
|
2021-07-23 00:59:20 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-19 20:52:28 -07:00
|
|
|
|
2013-04-23 16:38:02 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2019-12-04 09:52:58 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-24 16:55:28 +08:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-10-16 10:20:53 -07:00
|
|
|
|
|
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
2018-10-16 10:20:53 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
2021-07-28 12:38:11 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2019-02-15 19:13:19 +08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-04-25 09:03:00 +02:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-15 16:50:51 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
2018-09-25 13:54:33 -07:00
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-10-16 10:20:53 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
2020-03-23 17:43:04 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-12-31 12:14:16 -06:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2019-12-31 12:14:16 -06:00
|
|
|
|
|
|
|
|
|
2022-03-23 21:29:04 -04:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-12-31 12:14:16 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-15 16:50:51 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-28 12:38:11 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2022-08-15 16:50:51 -07:00
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
2022-08-15 16:50:51 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2022-08-15 16:50:51 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2022-08-15 16:50:51 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-01 17:53:23 +08:00
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-01 17:53:23 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-06-03 09:38:06 +02:00
|
|
|
|
2017-02-25 11:08:28 +08:00
|
|
|
|
2016-09-18 23:30:07 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
|
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
|
|
|
|
|
2015-07-20 15:29:37 +02:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
2014-01-30 11:19:05 -08:00
|
|
|
|
2019-02-15 19:13:19 +08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-12 09:22:29 +08:00
|
|
|
|
2019-11-01 17:53:23 +08:00
|
|
|
|
2018-09-12 09:22:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-04-25 09:03:00 +02:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
|
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-06-03 09:38:06 +02:00
|
|
|
|
2022-09-28 23:38:53 +08:00
|
|
|
|
|
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-05-20 09:29:39 -07:00
|
|
|
|
2015-04-23 12:04:33 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-06-03 09:38:06 +02:00
|
|
|
|
2016-10-11 13:56:01 -07:00
|
|
|
|
2017-12-31 16:26:38 -08:00
|
|
|
|
2022-09-28 23:38:53 +08:00
|
|
|
|
|
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2018-01-11 14:19:32 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
|
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 23:03:19 +08:00
|
|
|
|
|
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2014-01-30 11:19:05 -08:00
|
|
|
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
|
2016-05-17 16:23:36 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-10-06 19:02:05 -07:00
|
|
|
|
2022-02-28 14:41:22 +02:00
|
|
|
|
2016-10-06 19:02:05 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-16 09:13:06 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-10-06 19:02:05 -07:00
|
|
|
|
|
|
|
|
|
2022-02-28 14:41:22 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-10-06 19:02:05 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-16 09:13:06 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-10-06 19:02:05 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-14 11:07:18 -07:00
|
|
|
|
2022-02-28 14:41:23 +02:00
|
|
|
|
|
|
|
|
|
2022-04-12 15:01:58 -07:00
|
|
|
|
2022-07-14 11:07:18 -07:00
|
|
|
|
2022-04-12 15:01:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-02-28 14:41:23 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-04-12 15:01:58 -07:00
|
|
|
|
2022-02-28 14:41:23 +02:00
|
|
|
|
2022-04-12 15:01:58 -07:00
|
|
|
|
|
|
|
|
|
2022-02-28 14:41:23 +02:00
|
|
|
|
|
|
|
|
|
2019-08-23 17:58:35 +08:00
|
|
|
|
2013-12-20 17:39:59 +08:00
|
|
|
|
2019-08-23 17:58:35 +08:00
|
|
|
|
2022-02-28 14:41:22 +02:00
|
|
|
|
|
|
|
|
|
2013-12-20 17:39:59 +08:00
|
|
|
|
|
|
|
|
|
2022-02-28 14:41:22 +02:00
|
|
|
|
2022-04-12 15:01:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-02-28 14:41:22 +02:00
|
|
|
|
2019-08-23 17:58:35 +08:00
|
|
|
|
2018-01-31 11:36:57 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
|
|
|
|
|
2019-08-23 17:58:35 +08:00
|
|
|
|
|
|
|
|
|
2013-12-20 17:39:59 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-07-27 10:36:31 -07:00
|
|
|
|
|
|
|
|
|
2016-05-17 16:23:36 -07:00
|
|
|
|
2016-07-27 10:36:31 -07:00
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-02-14 17:44:12 +08:00
|
|
|
|
2018-02-06 08:21:45 +08:00
|
|
|
|
|
|
|
|
|
2021-02-02 17:39:22 +08:00
|
|
|
|
2019-08-28 17:33:38 +08:00
|
|
|
|
|
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-02-19 10:31:52 +08:00
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-06-04 14:25:24 -07:00
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
2016-12-21 12:13:03 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
|
|
|
|
|
2016-06-05 14:31:41 -05:00
|
|
|
|
2016-05-17 16:23:36 -07:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-06-05 14:31:55 -05:00
|
|
|
|
2016-12-21 12:13:03 -08:00
|
|
|
|
2014-10-29 14:37:22 -07:00
|
|
|
|
2016-12-21 12:13:03 -08:00
|
|
|
|
2016-06-05 14:31:55 -05:00
|
|
|
|
2016-07-27 10:36:31 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
2016-01-18 18:24:59 +08:00
|
|
|
|
|
|
|
|
|
2019-02-15 19:13:19 +08:00
|
|
|
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2019-05-20 09:29:39 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
|
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
|
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2016-01-18 18:24:59 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-05-25 17:43:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2023-02-05 19:13:39 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-02-28 14:41:23 +02:00
|
|
|
|
2016-11-01 07:40:10 -06:00
|
|
|
|
2022-02-28 14:41:23 +02:00
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
|
|
|
|
|
2023-02-05 19:13:39 -08:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
|
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
2018-11-13 11:57:32 +08:00
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
|
|
|
|
|
2018-11-13 11:57:32 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2018-11-13 11:57:32 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
|
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2019-04-06 16:29:36 +05:30
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
|
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
|
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
|
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
2016-02-24 17:17:55 +08:00
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-24 17:17:55 +08:00
|
|
|
|
|
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
2017-04-05 22:49:44 +03:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2015-04-23 14:38:15 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
2015-05-15 16:26:10 -07:00
|
|
|
|
|
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
|
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
2014-12-24 16:08:14 +08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
2019-08-23 17:58:35 +08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-10-22 23:24:28 +08:00
|
|
|
|
|
|
|
|
|
2023-02-02 17:02:39 -08:00
|
|
|
|
2018-10-22 23:24:28 +08:00
|
|
|
|
2018-10-16 10:20:53 -07:00
|
|
|
|
2022-09-14 09:33:22 +08:00
|
|
|
|
2018-10-22 09:12:51 +08:00
|
|
|
|
|
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-12 16:55:41 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-12-03 09:52:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-12 16:55:41 +08:00
|
|
|
|
|
|
|
|
|
2021-01-24 11:02:34 +01:00
|
|
|
|
2019-07-12 16:55:41 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-12 16:55:42 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-12 16:55:41 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-09 08:24:48 +08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-10 10:14:02 +08:00
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
|
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-12 16:55:41 +08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
2021-03-11 12:01:37 +01:00
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-02 17:02:39 -08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-28 23:47:18 +08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2015-04-23 14:38:15 -07:00
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
2015-04-23 12:04:33 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2017-05-19 23:37:01 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-28 23:47:18 +08:00
|
|
|
|
2017-05-19 23:37:01 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
|
2017-10-07 16:02:21 +02:00
|
|
|
|
|
|
|
|
|
2017-02-03 17:44:04 -08:00
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
2019-08-28 17:33:38 +08:00
|
|
|
|
|
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
2018-05-28 23:47:18 +08:00
|
|
|
|
|
|
|
|
|
2016-12-14 10:12:56 -08:00
|
|
|
|
2021-03-11 12:01:37 +01:00
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
2017-05-10 11:18:25 -07:00
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-09 19:33:39 +08:00
|
|
|
|
2023-02-02 17:02:39 -08:00
|
|
|
|
2018-01-09 19:33:39 +08:00
|
|
|
|
f2fs: trace old block address for CoWed page
This patch enables to trace old block address of CoWed page for better
debugging.
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f0, oldaddr = 0xfe8ab, newaddr = 0xfee90 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f8, oldaddr = 0xfe8b0, newaddr = 0xfee91 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4fa, oldaddr = 0xfe8ae, newaddr = 0xfee92 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x96, oldaddr = 0xf049b, newaddr = 0x2bbe rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x97, oldaddr = 0xf049c, newaddr = 0x2bbf rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x98, oldaddr = 0xf049d, newaddr = 0x2bc0 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x47, oldaddr = 0xffffffff, newaddr = 0xf2631 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x48, oldaddr = 0xffffffff, newaddr = 0xf2632 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x49, oldaddr = 0xffffffff, newaddr = 0xf2633 rw = WRITE, type = DATA
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-22 18:36:38 +08:00
|
|
|
|
2017-05-19 23:37:01 +08:00
|
|
|
|
|
|
|
|
|
2018-05-28 23:47:18 +08:00
|
|
|
|
2017-05-19 23:37:01 +08:00
|
|
|
|
|
|
|
|
|
2018-05-28 23:47:18 +08:00
|
|
|
|
2018-08-20 19:21:43 -07:00
|
|
|
|
2019-08-23 17:58:36 +08:00
|
|
|
|
2018-09-06 11:40:12 -07:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2013-11-30 12:51:14 +09:00
|
|
|
|
|
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
2022-07-14 11:07:18 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2022-02-28 14:41:22 +02:00
|
|
|
|
|
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
2022-02-28 14:41:23 +02:00
|
|
|
|
|
|
|
|
|
2022-01-24 10:11:03 +01:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
2022-02-28 14:41:22 +02:00
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-12-31 12:14:56 -06:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2021-07-28 12:38:11 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-14 11:07:18 -07:00
|
|
|
|
|
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
|
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
2020-07-01 10:27:40 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-08-22 21:18:00 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-25 13:54:33 -07:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
2022-08-20 11:04:41 +08:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-07-19 00:19:06 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-07-19 00:19:06 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
2012-11-29 13:28:09 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2018-12-25 17:43:42 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
2016-01-07 13:23:12 -08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2016-02-24 17:16:47 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2016-02-24 17:16:47 +08:00
|
|
|
|
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2014-09-02 15:31:18 -07:00
|
|
|
|
2017-07-09 00:13:07 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 10:13:22 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2017-07-09 00:13:07 +08:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-25 17:43:42 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
2020-02-14 17:44:10 +08:00
|
|
|
|
2021-04-06 09:47:35 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-11-10 23:13:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2013-11-10 23:13:18 +08:00
|
|
|
|
|
|
|
|
|
2013-12-27 17:04:17 +09:00
|
|
|
|
2013-11-10 23:13:18 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2013-12-27 17:04:17 +09:00
|
|
|
|
2013-11-10 23:13:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-08-05 15:52:16 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
2015-08-05 15:52:16 +08:00
|
|
|
|
2015-03-19 19:26:02 +08:00
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2015-08-05 15:52:16 +08:00
|
|
|
|
|
|
|
|
|
2015-02-05 17:54:31 +08:00
|
|
|
|
2015-03-19 19:26:02 +08:00
|
|
|
|
2015-08-05 15:52:16 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2022-07-14 11:07:18 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-04-23 12:04:33 -07:00
|
|
|
|
2015-10-09 15:11:38 -07:00
|
|
|
|
2013-05-13 08:38:35 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2015-02-05 18:03:40 +08:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
|
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
|
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
|
|
|
|
|
2015-02-05 18:03:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2015-07-15 13:08:21 -07:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2013-12-06 15:00:58 +09:00
|
|
|
|
2015-07-15 13:08:21 -07:00
|
|
|
|
|
|
|
|
|
2013-05-13 08:38:35 +09:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
|
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
|
|
|
|
|
2015-02-05 18:03:40 +08:00
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2013-08-20 19:13:07 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
|
|
|
|
|
2013-08-20 19:13:07 +09:00
|
|
|
|
|
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2016-06-30 18:49:15 -07:00
|
|
|
|
|
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
2013-08-20 19:13:07 +09:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2020-07-01 10:27:40 +08:00
|
|
|
|
|
|
|
|
|
2013-03-08 21:29:23 +09:00
|
|
|
|
2015-07-15 13:08:21 -07:00
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
2015-07-15 13:08:21 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2015-10-09 15:11:38 -07:00
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
|
|
|
|
|
2013-03-08 21:29:23 +09:00
|
|
|
|
2015-04-30 17:00:33 -07:00
|
|
|
|
2013-03-08 21:29:23 +09:00
|
|
|
|
2013-12-06 15:00:58 +09:00
|
|
|
|
2013-04-26 11:55:17 +09:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2016-07-03 22:05:12 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-29 13:28:09 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 16:21:29 +09:00
|
|
|
|
2013-12-21 18:02:14 +08:00
|
|
|
|
|
|
|
|
|
2015-07-14 18:14:06 +08:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2013-12-27 17:04:17 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-01 22:03:47 -08:00
|
|
|
|
2015-10-09 15:11:38 -07:00
|
|
|
|
2015-07-14 18:14:06 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-04-29 11:18:42 -07:00
|
|
|
|
2015-07-14 18:14:06 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2013-12-27 17:04:17 +09:00
|
|
|
|
2013-11-10 23:13:18 +08:00
|
|
|
|
2015-04-29 11:18:42 -07:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2013-12-27 17:04:17 +09:00
|
|
|
|
2015-04-29 11:18:42 -07:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2015-04-29 11:18:42 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2016-06-30 18:49:15 -07:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-04-23 12:04:33 -07:00
|
|
|
|
2013-12-27 17:04:17 +09:00
|
|
|
|
2016-01-01 22:03:47 -08:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2015-04-23 12:04:33 -07:00
|
|
|
|
2016-01-01 22:03:47 -08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-04-29 11:18:42 -07:00
|
|
|
|
2015-09-11 14:43:52 +08:00
|
|
|
|
2016-05-20 16:32:49 -07:00
|
|
|
|
2016-05-20 09:22:03 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-11-28 09:23:00 +09:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2014-09-02 15:31:18 -07:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
|
|
|
|
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
2017-07-09 00:13:07 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2016-05-20 10:13:22 -07:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
f2fs: preallocate fallocated blocks for direct IO
Normally, due to DIO_SKIP_HOLES flag is set by default, blockdev_direct_IO in
f2fs_direct_IO tries to skip DIO in holes when writing inside i_size, this
makes us falling back to buffered IO which shows lower performance.
So in commit 59b802e5a453 ("f2fs: allocate data blocks in advance for
f2fs_direct_IO"), we improve perfromance by allocating data blocks in advance
if we meet holes no matter in i_size or not, since with it we can avoid falling
back to buffered IO.
But we forget to consider for unwritten fallocated block in this commit.
This patch tries to fix it for fallocate case, this helps to improve
performance.
Test result:
Storage info: sandisk ultra 64G micro sd card.
touch /mnt/f2fs/file
truncate -s 67108864 /mnt/f2fs/file
fallocate -o 0 -l 67108864 /mnt/f2fs/file
time dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=64 conv=notrunc oflag=direct
Time before applying the patch:
67108864 bytes (67 MB) copied, 36.16 s, 1.9 MB/s
real 0m36.162s
user 0m0.000s
sys 0m0.180s
Time after applying the patch:
67108864 bytes (67 MB) copied, 27.7776 s, 2.4 MB/s
real 0m27.780s
user 0m0.000s
sys 0m0.036s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-23 10:33:37 +08:00
|
|
|
|
2021-12-13 14:16:32 -08:00
|
|
|
|
2018-07-17 00:02:17 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-02-14 17:44:10 +08:00
|
|
|
|
2018-09-27 18:34:52 +08:00
|
|
|
|
f2fs: preallocate fallocated blocks for direct IO
Normally, due to DIO_SKIP_HOLES flag is set by default, blockdev_direct_IO in
f2fs_direct_IO tries to skip DIO in holes when writing inside i_size, this
makes us falling back to buffered IO which shows lower performance.
So in commit 59b802e5a453 ("f2fs: allocate data blocks in advance for
f2fs_direct_IO"), we improve perfromance by allocating data blocks in advance
if we meet holes no matter in i_size or not, since with it we can avoid falling
back to buffered IO.
But we forget to consider for unwritten fallocated block in this commit.
This patch tries to fix it for fallocate case, this helps to improve
performance.
Test result:
Storage info: sandisk ultra 64G micro sd card.
touch /mnt/f2fs/file
truncate -s 67108864 /mnt/f2fs/file
fallocate -o 0 -l 67108864 /mnt/f2fs/file
time dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=64 conv=notrunc oflag=direct
Time before applying the patch:
67108864 bytes (67 MB) copied, 36.16 s, 1.9 MB/s
real 0m36.162s
user 0m0.000s
sys 0m0.180s
Time after applying the patch:
67108864 bytes (67 MB) copied, 27.7776 s, 2.4 MB/s
real 0m27.780s
user 0m0.000s
sys 0m0.036s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-23 10:33:37 +08:00
|
|
|
|
|
|
|
|
|
2017-07-09 00:13:07 +08:00
|
|
|
|
|
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
f2fs: preallocate fallocated blocks for direct IO
Normally, due to DIO_SKIP_HOLES flag is set by default, blockdev_direct_IO in
f2fs_direct_IO tries to skip DIO in holes when writing inside i_size, this
makes us falling back to buffered IO which shows lower performance.
So in commit 59b802e5a453 ("f2fs: allocate data blocks in advance for
f2fs_direct_IO"), we improve perfromance by allocating data blocks in advance
if we meet holes no matter in i_size or not, since with it we can avoid falling
back to buffered IO.
But we forget to consider for unwritten fallocated block in this commit.
This patch tries to fix it for fallocate case, this helps to improve
performance.
Test result:
Storage info: sandisk ultra 64G micro sd card.
touch /mnt/f2fs/file
truncate -s 67108864 /mnt/f2fs/file
fallocate -o 0 -l 67108864 /mnt/f2fs/file
time dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=64 conv=notrunc oflag=direct
Time before applying the patch:
67108864 bytes (67 MB) copied, 36.16 s, 1.9 MB/s
real 0m36.162s
user 0m0.000s
sys 0m0.180s
Time after applying the patch:
67108864 bytes (67 MB) copied, 27.7776 s, 2.4 MB/s
real 0m27.780s
user 0m0.000s
sys 0m0.036s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-23 10:33:37 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support age threshold based garbage collection
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.
This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:
1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
0 means youngest, 100 means oldest, if we set age threshold to 80
then select dirty segments which has age in range of [80, 100] as
candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;
2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.
3. merge valid blocks from source victim into target victim with
SSR alloctor.
Test steps:
- create 160 dirty segments:
* half of them have 128 valid blocks per segment
* left of them have 384 valid blocks per segment
- run background GC
Benefit: GC count and block movement count both decrease obviously:
- Before:
- Valid: 86
- Dirty: 1
- Prefree: 11
- Free: 6001 (6001)
GC calls: 162 (BG: 220)
- data segments : 160 (160)
- node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
- data blocks : 40960 (40960)
- node blocks : 494 (494)
IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments
- After:
- Valid: 87
- Dirty: 0
- Prefree: 4
- Free: 6008 (6008)
GC calls: 75 (BG: 76)
- data segments : 74 (74)
- node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
- data blocks : 12544 (12544)
- node blocks : 269 (269)
IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
|
|
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
|
|
|
|
|
2019-08-28 17:33:35 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-18 14:36:22 +08:00
|
|
|
|
2017-03-13 20:22:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2017-03-13 20:22:18 +08:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2017-03-13 20:22:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-29 13:28:09 +09:00
|
|
|
|
2020-02-27 19:30:05 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-10-27 09:53:45 +08:00
|
|
|
|
2015-08-19 19:11:19 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-04-06 19:55:34 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-09-21 20:17:52 +08:00
|
|
|
|
2018-11-13 14:33:45 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
2015-12-17 13:20:59 +08:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2016-08-20 15:12:01 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-04-06 19:55:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2020-02-14 17:44:12 +08:00
|
|
|
|
2018-11-20 04:29:35 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-04-06 19:55:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
|
|
|
|
|
2018-10-10 10:56:22 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2015-02-05 17:50:30 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
2018-11-13 14:33:45 +08:00
|
|
|
|
2020-06-18 14:36:22 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2013-12-26 16:55:22 +09:00
|
|
|
|
2016-05-05 19:13:02 +08:00
|
|
|
|
|
|
|
|
|
2021-08-26 10:03:15 +08:00
|
|
|
|
2016-01-26 15:42:58 +08:00
|
|
|
|
2021-08-26 10:03:15 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2016-01-26 15:42:58 +08:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2016-01-26 15:42:58 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2013-04-23 16:38:02 +09:00
|
|
|
|
2015-09-18 16:51:51 +08:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
2016-11-02 14:52:15 +01:00
|
|
|
|
2016-01-26 15:39:35 +08:00
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
|
|
|
|
|
2020-02-14 17:44:10 +08:00
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
2018-09-27 18:34:52 +08:00
|
|
|
|
2020-02-14 17:44:12 +08:00
|
|
|
|
2018-11-13 14:33:45 +08:00
|
|
|
|
2018-09-27 18:34:52 +08:00
|
|
|
|
2019-08-28 17:33:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-27 18:34:52 +08:00
|
|
|
|
|
|
|
|
|
2015-09-18 16:51:51 +08:00
|
|
|
|
2015-09-21 20:17:52 +08:00
|
|
|
|
|
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
2015-09-21 20:17:52 +08:00
|
|
|
|
2016-02-03 13:49:44 -08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-03 13:49:44 -08:00
|
|
|
|
2018-09-19 15:28:40 -07:00
|
|
|
|
|
|
|
|
|
2017-11-28 09:23:00 +09:00
|
|
|
|
|
|
|
|
|
2021-11-12 14:31:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 10:13:22 -07:00
|
|
|
|
2021-11-12 14:31:16 -08:00
|
|
|
|
2016-02-03 13:49:44 -08:00
|
|
|
|
2015-09-18 16:51:51 +08:00
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
2017-02-23 19:55:05 +08:00
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
2015-09-18 16:51:51 +08:00
|
|
|
|
2021-08-06 08:02:50 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
|
|
|
|
|
2021-08-06 08:02:50 +08:00
|
|
|
|
|
|
|
|
|
2016-05-05 19:13:02 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
|
|
|
|
|
2016-01-26 15:42:58 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-11-30 19:28:22 +08:00
|
|
|
|
2016-01-26 15:42:58 +08:00
|
|
|
|
2018-01-10 18:18:52 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
2018-01-10 18:18:52 +08:00
|
|
|
|
2015-08-19 19:11:19 +08:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
|
|
|
|
|
2016-02-03 13:09:09 -08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
|
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-17 13:20:59 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 17:11:43 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
|
|
2018-11-13 14:33:45 +08:00
|
|
|
|
2020-06-18 14:36:22 +08:00
|
|
|
|
2016-10-11 22:57:03 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
|
2015-12-17 13:20:59 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2018-10-10 10:56:22 +05:30
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-10-10 10:56:22 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2018-11-13 14:33:45 +08:00
|
|
|
|
2020-06-18 14:36:22 +08:00
|
|
|
|
2016-10-11 22:57:03 +08:00
|
|
|
|
2015-12-22 13:23:35 -08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
|
2013-12-16 19:04:05 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2018-03-08 19:34:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-20 04:29:35 +08:00
|
|
|
|
2018-03-08 19:34:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-24 15:04:27 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-12-13 14:16:32 -08:00
|
|
|
|
2018-07-17 00:02:17 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
2020-11-24 14:55:47 -08:00
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
|
|
2018-01-17 16:31:36 +08:00
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-29 20:13:13 +08:00
|
|
|
|
2022-09-23 15:17:55 +08:00
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-12-13 14:16:32 -08:00
|
|
|
|
2018-07-17 00:02:17 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
2020-11-24 14:55:47 -08:00
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-29 20:13:13 +08:00
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
2020-06-29 20:13:13 +08:00
|
|
|
|
|
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-06-08 04:30:14 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2016-01-26 15:42:58 +08:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-25 21:18:19 -07:00
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
|
2021-07-25 21:18:19 -07:00
|
|
|
|
2021-03-09 13:21:18 +08:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-05-23 09:30:14 +02:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:37:35 +08:00
|
|
|
|
|
|
|
|
|
2021-03-09 13:21:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-22 18:03:50 +08:00
|
|
|
|
2015-10-15 11:34:49 -07:00
|
|
|
|
|
|
|
|
|
2018-01-11 14:37:35 +08:00
|
|
|
|
2015-10-15 11:34:49 -07:00
|
|
|
|
|
|
|
|
|
2020-11-24 14:55:47 -08:00
|
|
|
|
|
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2020-11-24 14:55:47 -08:00
|
|
|
|
|
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2021-07-25 21:18:19 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-25 21:18:19 -07:00
|
|
|
|
2016-01-26 15:42:58 +08:00
|
|
|
|
2016-10-11 22:57:04 +08:00
|
|
|
|
2020-11-24 14:55:47 -08:00
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
|
2016-10-11 22:57:04 +08:00
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
|
|
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2021-07-25 21:18:19 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-08 20:19:27 +08:00
|
|
|
|
2020-12-14 17:20:57 +08:00
|
|
|
|
2018-12-12 15:20:11 +05:30
|
|
|
|
2016-01-08 20:19:27 +08:00
|
|
|
|
|
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
|
|
|
|
|
|
2020-06-29 20:13:13 +08:00
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-08 20:19:27 +08:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2021-07-25 21:18:19 -07:00
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
|
2021-07-25 21:18:19 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2021-07-25 21:18:19 -07:00
|
|
|
|
|
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-22 15:40:57 -05:00
|
|
|
|
2015-05-08 19:30:32 -07:00
|
|
|
|
2014-06-08 04:30:14 +09:00
|
|
|
|
|
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-24 15:04:27 -08:00
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
2020-11-24 15:04:27 -08:00
|
|
|
|
|
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
|
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-02-18 18:21:35 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-20 11:04:41 +08:00
|
|
|
|
|
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-02-18 18:21:35 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-24 15:04:27 -08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-24 15:04:27 -08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-30 13:30:45 -07:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-29 21:21:35 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
2022-08-02 12:24:37 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2020-04-23 17:57:33 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
2020-04-21 19:36:21 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2022-08-20 11:04:41 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-04 22:33:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-01 21:47:27 -07:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-12 19:36:41 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-26 15:42:58 +08:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
|
2017-11-28 09:23:00 +09:00
|
|
|
|
2018-11-13 14:33:45 +08:00
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
2017-11-25 11:46:18 +08:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
|
|
|
|
|
2017-03-13 16:35:13 +08:00
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2021-05-10 17:30:32 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-12 19:36:41 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-08-12 19:36:41 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-08-12 19:36:41 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-25 21:07:30 +08:00
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
|
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
|
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2021-05-10 17:30:32 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
|
|
|
|
|
2016-07-27 10:36:31 -07:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2015-04-09 11:20:42 -07:00
|
|
|
|
|
|
|
|
|
2022-04-29 11:12:16 -04:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-04-29 11:12:16 -04:00
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
2014-10-23 19:48:09 -07:00
|
|
|
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
2014-05-06 16:53:08 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-08-06 23:22:50 +09:00
|
|
|
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
|
|
|
|
|
2014-10-23 19:48:09 -07:00
|
|
|
|
2020-06-01 21:47:27 -07:00
|
|
|
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2015-10-12 17:02:26 +08:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2022-03-23 21:29:04 -04:00
|
|
|
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
2020-06-01 21:47:27 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
|
|
|
|
|
2017-09-05 16:54:24 -07:00
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2018-08-22 21:18:00 -07:00
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: introduce memalloc_retry_wait()
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 14:07:14 -08:00
|
|
|
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-12 15:20:11 +05:30
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-08-20 19:21:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-12-07 16:25:39 -08:00
|
|
|
|
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
2022-09-07 10:38:48 +08:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-12-09 10:25:43 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-02-14 17:44:12 +08:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: guarantee journalled quota data by checkpoint
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 20:05:00 +08:00
|
|
|
|
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
2018-08-20 19:21:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-04-23 14:38:15 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
2018-07-17 00:02:17 +08:00
|
|
|
|
2017-04-25 12:45:13 +00:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-25 12:45:13 +00:00
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2017-04-25 12:45:13 +00:00
|
|
|
|
2017-04-24 15:20:16 -07:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-25 12:45:13 +00:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2017-06-21 17:52:39 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: support revoking atomic written pages
f2fs support atomic write with following semantics:
1. open db file
2. ioctl start atomic write
3. (write db file) * n
4. ioctl commit atomic write
5. close db file
With this flow we can avoid file becoming corrupted when abnormal power
cut, because we hold data of transaction in referenced pages linked in
inmem_pages list of inode, but without setting them dirty, so these data
won't be persisted unless we commit them in step 4.
But we should still hold journal db file in memory by using volatile
write, because our semantics of 'atomic write support' is incomplete, in
step 4, we could fail to submit all dirty data of transaction, once
partial dirty data was committed in storage, then after a checkpoint &
abnormal power-cut, db file will be corrupted forever.
So this patch tries to improve atomic write flow by adding a revoking flow,
once inner error occurs in committing, this gives another chance to try to
revoke these partial submitted data of current transaction, it makes
committing operation more like aotmical one.
If we're not lucky, once revoking operation was failed, EAGAIN will be
reported to user for suggesting doing the recovery with held journal file,
or retrying current transaction again.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-06 14:40:34 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
f2fs: trace old block address for CoWed page
This patch enables to trace old block address of CoWed page for better
debugging.
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f0, oldaddr = 0xfe8ab, newaddr = 0xfee90 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f8, oldaddr = 0xfe8b0, newaddr = 0xfee91 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4fa, oldaddr = 0xfe8ae, newaddr = 0xfee92 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x96, oldaddr = 0xf049b, newaddr = 0x2bbe rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x97, oldaddr = 0xf049c, newaddr = 0x2bbf rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x98, oldaddr = 0xf049d, newaddr = 0x2bc0 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x47, oldaddr = 0xffffffff, newaddr = 0xf2631 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x48, oldaddr = 0xffffffff, newaddr = 0xf2632 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x49, oldaddr = 0xffffffff, newaddr = 0xf2633 rw = WRITE, type = DATA
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-22 18:36:38 +08:00
|
|
|
|
2015-02-25 19:25:01 -08:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2015-02-25 19:25:01 -08:00
|
|
|
|
2017-04-25 12:45:13 +00:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
|
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
|
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
|
|
|
|
|
2018-05-23 22:25:08 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-04-11 23:09:04 -07:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2019-02-21 20:37:14 +08:00
|
|
|
|
2020-07-02 01:56:06 +00:00
|
|
|
|
2019-05-20 09:29:39 -07:00
|
|
|
|
2019-02-21 20:37:14 +08:00
|
|
|
|
|
|
|
|
|
2019-04-15 15:30:53 +08:00
|
|
|
|
|
|
|
|
|
2019-02-21 20:37:14 +08:00
|
|
|
|
2017-04-25 12:45:12 +00:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-12-13 14:16:32 -08:00
|
|
|
|
2018-07-17 00:02:17 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-04-11 23:09:04 -07:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
2017-08-02 23:21:48 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-11 17:42:53 +08:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2014-09-02 15:31:18 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2019-11-07 17:29:00 +08:00
|
|
|
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 16:21:29 +09:00
|
|
|
|
2023-05-14 16:07:23 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2015-04-23 14:38:15 -07:00
|
|
|
|
2017-09-29 13:59:38 +08:00
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2016-06-05 14:31:55 -05:00
|
|
|
|
2016-11-01 10:00:38 -06:00
|
|
|
|
2017-04-25 12:45:13 +00:00
|
|
|
|
2015-04-23 14:38:15 -07:00
|
|
|
|
2015-04-23 12:04:33 -07:00
|
|
|
|
2017-02-03 17:44:04 -08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
2022-07-12 23:26:43 +08:00
|
|
|
|
2017-08-02 23:21:48 +08:00
|
|
|
|
2018-01-09 19:33:39 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2014-05-06 16:48:26 +08:00
|
|
|
|
|
|
|
|
|
2018-01-18 17:29:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-28 16:59:26 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-10 10:12:22 +08:00
|
|
|
|
|
|
|
|
|
2018-05-28 16:59:26 +08:00
|
|
|
|
2018-01-18 17:29:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-06-29 23:20:45 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 16:21:29 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2014-04-15 16:04:15 +09:00
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 16:21:29 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 16:21:29 +09:00
|
|
|
|
2014-12-09 06:08:59 -08:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2020-04-09 10:25:21 -07:00
|
|
|
|
2023-05-14 16:07:23 +08:00
|
|
|
|
2020-06-18 14:36:23 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-14 16:07:23 +08:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2020-06-18 14:36:23 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2020-06-18 14:36:23 +08:00
|
|
|
|
2023-05-14 16:07:23 +08:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2020-06-18 14:36:23 +08:00
|
|
|
|
2014-02-17 19:29:27 +09:00
|
|
|
|
|
|
|
|
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
2014-02-17 19:29:27 +09:00
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 16:21:29 +09:00
|
|
|
|
2016-09-01 12:02:51 -07:00
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 16:21:29 +09:00
|
|
|
|
2017-03-24 20:05:13 -04:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2014-10-23 19:48:09 -07:00
|
|
|
|
2017-02-23 20:31:20 +08:00
|
|
|
|
2014-10-23 19:48:09 -07:00
|
|
|
|
2017-02-23 20:31:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2017-05-12 13:51:34 -07:00
|
|
|
|
|
|
|
|
|
2017-10-09 17:55:19 +08:00
|
|
|
|
2018-01-17 16:31:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-02-27 19:30:03 +08:00
|
|
|
|
2018-01-17 16:31:37 +08:00
|
|
|
|
|
|
|
|
|
2020-02-27 19:30:03 +08:00
|
|
|
|
2018-01-17 16:31:37 +08:00
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2014-02-17 19:29:27 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 16:21:29 +09:00
|
|
|
|
2014-09-12 15:53:45 -07:00
|
|
|
|
2018-07-27 18:15:16 +08:00
|
|
|
|
2015-02-25 19:25:01 -08:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
2018-07-27 18:15:16 +08:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
|
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
2017-03-24 20:05:13 -04:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2017-02-03 17:44:04 -08:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: fix potential recursive call when enabling data_flush
As Hagbard Celine reported:
Hi, this is a long standing bug that I've hit before on older kernels,
but I was not able to get the syslog saved because of the nature of
the bug. This time I had booted form a pen-drive, and was able to save
the log to it's efi-partition.
What i did to trigger it was to create a partition and format it f2fs,
then mount it with options:
"rw,relatime,lazytime,background_gc=on,disable_ext_identify,discard,heap,user_xattr,inline_xattr,acl,inline_data,inline_dentry,flush_merge,data_flush,extent_cache,mode=adaptive,active_logs=6,whint_mode=fs-based,alloc_mode=default,fsync_mode=strict".
Then I unpacked a big .tar.xz to the partition (I used a
gentoo-stage3-tarball as I was in process of installing Gentoo).
Same options just without data_flush gives no problems.
Mar 20 20:54:01 usbgentoo kernel: FAT-fs (nvme0n1p4): Volume was not
properly unmounted. Some data may be corrupt. Please run fsck.
Mar 20 21:05:23 usbgentoo kernel: kworker/dying (1588) used greatest
stack depth: 12064 bytes left
Mar 20 21:06:40 usbgentoo kernel: BUG: stack guard page was hit at
00000000a4b0733c (stack is 0000000056016422..0000000096e7463f)
Mar 20 21:06:40 usbgentoo kernel: kernel stack overflow
......
Mar 20 21:06:40 usbgentoo kernel: Call Trace:
Mar 20 21:06:40 usbgentoo kernel: read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: ? xas_load+0x8/0x50
Mar 20 21:06:40 usbgentoo kernel: __get_node_page+0x73/0x2a0
Mar 20 21:06:40 usbgentoo kernel: f2fs_get_dnode_of_data+0x34e/0x580
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_inline_data+0x5e/0x2a0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x421/0x690
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_cache_pages+0x1cf/0x460
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_data_pages+0x2b3/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_chksum_verify+0x1d/0xc0
Mar 20 21:06:40 usbgentoo kernel: ? read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: do_writepages+0x3c/0xd0
Mar 20 21:06:40 usbgentoo kernel: __filemap_fdatawrite_range+0x7c/0xb0
Mar 20 21:06:40 usbgentoo kernel: f2fs_sync_dirty_inodes+0xf2/0x200
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs_bg+0x2a3/0x2c0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_dirtied+0x21/0xc0
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs+0xd6/0x2b0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x4fb/0x690
......
Mar 20 21:06:40 usbgentoo kernel: __writeback_single_inode+0x2a1/0x340
Mar 20 21:06:40 usbgentoo kernel: ? soft_cursor+0x1b4/0x220
Mar 20 21:06:40 usbgentoo kernel: writeback_sb_inodes+0x1d5/0x3e0
Mar 20 21:06:40 usbgentoo kernel: __writeback_inodes_wb+0x58/0xa0
Mar 20 21:06:40 usbgentoo kernel: wb_writeback+0x250/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? 0xffffffff8c000000
Mar 20 21:06:40 usbgentoo kernel: ? cpumask_next+0x16/0x20
Mar 20 21:06:40 usbgentoo kernel: wb_workfn+0x2f6/0x3b0
Mar 20 21:06:40 usbgentoo kernel: ? __switch_to_asm+0x40/0x70
Mar 20 21:06:40 usbgentoo kernel: process_one_work+0x1f5/0x3f0
Mar 20 21:06:40 usbgentoo kernel: worker_thread+0x28/0x3c0
Mar 20 21:06:40 usbgentoo kernel: ? rescuer_thread+0x330/0x330
Mar 20 21:06:40 usbgentoo kernel: kthread+0x10e/0x130
Mar 20 21:06:40 usbgentoo kernel: ? kthread_create_on_node+0x60/0x60
Mar 20 21:06:40 usbgentoo kernel: ret_from_fork+0x35/0x40
The root cause is that we run into an infinite recursive calling in
between f2fs_balance_fs_bg and writepage() as described below:
- f2fs_write_data_pages --- A
- __write_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg --- B
- f2fs_sync_dirty_inodes
- filemap_fdatawrite
- f2fs_write_data_pages --- A
...
- f2fs_balance_fs_bg --- B
...
In order to fix this issue, let's detect such condition in __write_data_page()
and just skip calling f2fs_balance_fs() recursively.
Reported-by: Hagbard Celine <hagbardcelin@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-02 18:52:19 +08:00
|
|
|
|
2022-09-14 21:28:46 +08:00
|
|
|
|
2017-04-20 13:51:57 -07:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2017-02-03 17:44:04 -08:00
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
2023-04-10 10:14:02 +08:00
|
|
|
|
|
|
|
|
|
2017-02-03 17:44:04 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-04-15 16:04:15 +09:00
|
|
|
|
2018-05-03 23:26:02 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-28 19:13:43 -08:00
|
|
|
|
2016-05-29 21:18:23 -07:00
|
|
|
|
|
|
|
|
|
2013-01-15 16:45:24 +09:00
|
|
|
|
|
|
|
|
|
2017-02-03 17:18:00 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-01-11 17:42:53 +08:00
|
|
|
|
2017-02-03 17:18:00 -08:00
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-08-02 23:21:48 +08:00
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2022-07-31 11:33:46 +08:00
|
|
|
|
2018-06-04 23:20:36 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-11-10 10:37:13 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-12-05 17:30:38 -05:00
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2017-03-24 20:05:13 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2020-06-15 16:51:32 +08:00
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2022-07-31 11:33:46 +08:00
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-31 11:33:46 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-10-22 20:08:00 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-10-22 20:08:00 -07:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2022-07-31 11:33:45 +08:00
|
|
|
|
2022-07-31 11:33:46 +08:00
|
|
|
|
2022-07-31 11:33:45 +08:00
|
|
|
|
|
|
|
|
|
2021-10-22 20:08:00 -07:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
2021-10-22 20:08:00 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-31 11:33:45 +08:00
|
|
|
|
2022-07-31 11:33:46 +08:00
|
|
|
|
2021-10-22 20:08:00 -07:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-23 22:25:09 +08:00
|
|
|
|
2018-06-04 23:20:36 +08:00
|
|
|
|
2018-05-23 22:25:09 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2017-06-21 17:52:39 -07:00
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
2016-01-20 23:43:51 +08:00
|
|
|
|
2018-12-25 17:43:42 +08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-01-11 17:42:53 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2016-11-28 19:13:43 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2017-06-21 17:52:39 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-03-22 14:39:13 -07:00
|
|
|
|
2020-02-17 17:45:44 +08:00
|
|
|
|
2017-06-21 17:52:39 -07:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2016-11-28 19:13:43 -08:00
|
|
|
|
2016-05-29 21:18:23 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2017-03-28 18:07:38 -07:00
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2022-07-31 11:33:46 +08:00
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-09-23 00:54:50 -07:00
|
|
|
|
2021-05-10 17:30:32 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2020-06-02 18:11:47 +05:30
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2020-06-02 18:11:47 +05:30
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
2020-06-02 18:11:47 +05:30
|
|
|
|
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
2017-05-10 11:28:38 -07:00
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
2016-09-29 18:50:11 +08:00
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-08-09 17:53:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-03-19 19:57:57 +08:00
|
|
|
|
2022-09-14 21:28:46 +08:00
|
|
|
|
2020-03-19 19:57:57 +08:00
|
|
|
|
|
|
|
|
|
2018-08-09 17:53:34 -07:00
|
|
|
|
|
|
|
|
|
f2fs: guarantee journalled quota data by checkpoint
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 20:05:00 +08:00
|
|
|
|
|
|
|
|
|
2020-03-19 19:57:57 +08:00
|
|
|
|
2020-12-01 13:08:02 +09:00
|
|
|
|
2020-03-19 19:57:57 +08:00
|
|
|
|
2018-08-09 17:53:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-30 00:20:39 +08:00
|
|
|
|
2017-08-02 23:21:48 +08:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2014-09-02 15:31:18 -07:00
|
|
|
|
2016-07-13 19:33:19 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2018-08-09 17:53:34 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2013-04-03 11:38:00 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-07-17 18:02:39 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-06-29 23:20:45 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: guarantee journalled quota data by checkpoint
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 20:05:00 +08:00
|
|
|
|
|
|
|
|
|
2015-10-08 10:40:07 -07:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2015-10-08 10:40:07 -07:00
|
|
|
|
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
|
|
|
|
|
|
2015-10-27 09:53:45 +08:00
|
|
|
|
|
|
|
|
|
2016-02-04 16:14:00 +08:00
|
|
|
|
|
|
|
|
|
2017-03-28 18:07:38 -07:00
|
|
|
|
|
|
|
|
|
2018-06-04 23:20:36 +08:00
|
|
|
|
2022-01-27 13:44:49 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-03-28 18:07:38 -07:00
|
|
|
|
2022-01-27 13:44:49 +08:00
|
|
|
|
2017-03-28 18:07:38 -07:00
|
|
|
|
2018-08-09 17:53:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-07-13 19:33:19 -07:00
|
|
|
|
2017-08-02 23:21:48 +08:00
|
|
|
|
2016-07-13 19:33:19 -07:00
|
|
|
|
2017-03-28 18:07:38 -07:00
|
|
|
|
2018-08-09 17:53:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-03-28 18:07:38 -07:00
|
|
|
|
2018-06-04 23:20:36 +08:00
|
|
|
|
2016-05-25 17:17:56 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-11 13:54:01 +09:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2014-03-18 13:43:05 +09:00
|
|
|
|
|
|
|
|
|
2014-09-12 15:53:45 -07:00
|
|
|
|
2016-02-04 16:14:00 +08:00
|
|
|
|
2014-03-18 13:43:05 +09:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2017-08-02 23:21:48 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-23 00:59:21 -07:00
|
|
|
|
2014-07-02 13:25:04 +08:00
|
|
|
|
2015-12-28 13:48:11 -08:00
|
|
|
|
2014-07-02 13:25:04 +08:00
|
|
|
|
2019-12-03 18:54:29 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
f2fs-for-5.15-rc1
In this cycle, we've addressed some performance issues such as lock contention,
misbehaving compress_cache, allowing extent_cache for compressed files, and new
sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues
quickly, we also added an iostat which shows the IO latencies periodically. On
the stability side, we've found two memory leakage cases in the error path in
compression flow. And, we've also fixed various corner cases in fiemap, quota,
checkpoint=disable, zstd, and so on.
Enhancement:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fix:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code paths such
as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos.
-----BEGIN PGP SIGNATURE-----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=W67o
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've addressed some performance issues such as lock
contention, misbehaving compress_cache, allowing extent_cache for
compressed files, and new sysfs to adjust ra_size for fadvise.
In order to diagnose the performance issues quickly, we also added an
iostat which shows the IO latencies periodically.
On the stability side, we've found two memory leakage cases in the
error path in compression flow. And, we've also fixed various corner
cases in fiemap, quota, checkpoint=disable, zstd, and so on.
Enhancements:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fixes:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code
paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity
check, and typos"
* tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
f2fs: should put a page beyond EOF when preparing a write
f2fs: deallocate compressed pages when error happens
f2fs: enable realtime discard iff device supports discard
f2fs: guarantee to write dirty data when enabling checkpoint back
f2fs: fix to unmap pages from userspace process in punch_hole()
f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()
f2fs: fix to account missing .skipped_gc_rwsem
f2fs: adjust unlock order for cleanup
f2fs: Don't create discard thread when device doesn't support realtime discard
f2fs: rebuild nat_bits during umount
f2fs: introduce periodic iostat io latency traces
f2fs: separate out iostat feature
f2fs: compress: do sanity check on cluster
f2fs: fix description about main_blkaddr node
f2fs: convert S_IRUGO to 0444
f2fs: fix to keep compatibility of fault injection interface
f2fs: support fault injection for f2fs_kmem_cache_alloc()
f2fs: compress: allow write compress released file after truncate to zero
f2fs: correct comment in segment.h
f2fs: improve sbi status info in debugfs/f2fs/status
...
2021-09-04 10:48:47 -07:00
|
|
|
|
2018-08-05 23:04:25 +08:00
|
|
|
|
2015-12-28 13:48:11 -08:00
|
|
|
|
2019-12-03 18:54:29 -08:00
|
|
|
|
2018-08-05 23:04:25 +08:00
|
|
|
|
f2fs-for-5.15-rc1
In this cycle, we've addressed some performance issues such as lock contention,
misbehaving compress_cache, allowing extent_cache for compressed files, and new
sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues
quickly, we also added an iostat which shows the IO latencies periodically. On
the stability side, we've found two memory leakage cases in the error path in
compression flow. And, we've also fixed various corner cases in fiemap, quota,
checkpoint=disable, zstd, and so on.
Enhancement:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fix:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code paths such
as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos.
-----BEGIN PGP SIGNATURE-----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=W67o
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've addressed some performance issues such as lock
contention, misbehaving compress_cache, allowing extent_cache for
compressed files, and new sysfs to adjust ra_size for fadvise.
In order to diagnose the performance issues quickly, we also added an
iostat which shows the IO latencies periodically.
On the stability side, we've found two memory leakage cases in the
error path in compression flow. And, we've also fixed various corner
cases in fiemap, quota, checkpoint=disable, zstd, and so on.
Enhancements:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fixes:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code
paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity
check, and typos"
* tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
f2fs: should put a page beyond EOF when preparing a write
f2fs: deallocate compressed pages when error happens
f2fs: enable realtime discard iff device supports discard
f2fs: guarantee to write dirty data when enabling checkpoint back
f2fs: fix to unmap pages from userspace process in punch_hole()
f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()
f2fs: fix to account missing .skipped_gc_rwsem
f2fs: adjust unlock order for cleanup
f2fs: Don't create discard thread when device doesn't support realtime discard
f2fs: rebuild nat_bits during umount
f2fs: introduce periodic iostat io latency traces
f2fs: separate out iostat feature
f2fs: compress: do sanity check on cluster
f2fs: fix description about main_blkaddr node
f2fs: convert S_IRUGO to 0444
f2fs: fix to keep compatibility of fault injection interface
f2fs: support fault injection for f2fs_kmem_cache_alloc()
f2fs: compress: allow write compress released file after truncate to zero
f2fs: correct comment in segment.h
f2fs: improve sbi status info in debugfs/f2fs/status
...
2021-09-04 10:48:47 -07:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2014-07-02 13:25:04 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
2018-11-14 19:34:28 +08:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
2016-02-03 13:49:44 -08:00
|
|
|
|
2021-07-16 09:39:13 -05:00
|
|
|
|
|
|
|
|
|
2016-02-03 13:49:44 -08:00
|
|
|
|
2021-07-16 09:39:13 -05:00
|
|
|
|
2016-02-03 13:49:44 -08:00
|
|
|
|
|
|
|
|
|
2018-11-14 19:34:28 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2020-06-18 14:36:22 +08:00
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-07-19 00:19:05 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2016-05-20 10:13:22 -07:00
|
|
|
|
2016-05-11 19:48:44 +08:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2016-04-06 11:27:03 -07:00
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
2020-06-18 14:36:22 +08:00
|
|
|
|
2017-03-13 20:22:18 +08:00
|
|
|
|
2018-11-14 19:34:28 +08:00
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
|
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
|
|
|
|
|
2015-12-23 13:48:58 -08:00
|
|
|
|
2020-06-18 14:36:22 +08:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-30 09:26:29 -08:00
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-18 16:02:48 -07:00
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-18 16:02:48 -07:00
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-18 16:02:48 -07:00
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-18 16:02:48 -07:00
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-02-22 14:31:43 -05:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2014-09-02 15:31:18 -07:00
|
|
|
|
2015-07-15 13:08:21 -07:00
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2022-02-22 14:31:43 -05:00
|
|
|
|
2014-05-06 16:46:04 +08:00
|
|
|
|
2019-08-23 17:58:36 +08:00
|
|
|
|
|
|
|
|
|
2018-08-20 19:21:43 -07:00
|
|
|
|
2019-08-23 17:58:36 +08:00
|
|
|
|
2018-08-20 19:21:43 -07:00
|
|
|
|
2014-11-25 10:59:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: fix compressed file start atomic write may cause data corruption
When compressed file has blocks, f2fs_ioc_start_atomic_write will succeed,
but compressed flag will be remained in inode. If write partial compreseed
cluster and commit atomic write will cause data corruption.
This is the reproduction process:
Step 1:
create a compressed file ,write 64K data , call fsync(), then the blocks
are write as compressed cluster.
Step2:
iotcl(F2FS_IOC_START_ATOMIC_WRITE) --- this should be fail, but not.
write page 0 and page 3.
iotcl(F2FS_IOC_COMMIT_ATOMIC_WRITE) -- page 0 and 3 write as normal file,
Step3:
drop cache.
read page 0-4 -- Since page 0 has a valid block address, read as
non-compressed cluster, page 1 and 2 will be filled with compressed data
or zero.
The root cause is, after commit 7eab7a696827 ("f2fs: compress: remove
unneeded read when rewrite whole cluster"), in step 2, f2fs_write_begin()
only set target page dirty, and in f2fs_commit_inmem_pages(), we will write
partial raw pages into compressed cluster, result in corrupting compressed
cluster layout.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 7eab7a696827 ("f2fs: compress: remove unneeded read when rewrite whole cluster")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-03-18 09:23:04 +08:00
|
|
|
|
2021-06-22 19:50:59 +08:00
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-04-26 11:55:17 +09:00
|
|
|
|
2017-02-17 09:55:55 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-10-28 16:52:30 +08:00
|
|
|
|
2017-02-17 09:55:55 -08:00
|
|
|
|
2014-07-02 13:25:04 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-04-30 09:22:45 +09:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
2014-10-17 20:33:55 -07:00
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
2014-10-17 20:33:55 -07:00
|
|
|
|
f2fs: guarantee journalled quota data by checkpoint
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 20:05:00 +08:00
|
|
|
|
|
|
|
|
|
2015-12-22 13:23:35 -08:00
|
|
|
|
2016-01-07 14:15:04 -08:00
|
|
|
|
2015-12-22 13:23:35 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-25 17:43:42 +08:00
|
|
|
|
2014-10-23 19:48:09 -07:00
|
|
|
|
2016-09-06 11:02:03 -07:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
|
|
|
|
|
2016-12-20 11:11:35 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 11:55:18 -08:00
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
|
|
|
|
2016-09-06 11:02:03 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
|
|
|
|
|
2019-06-20 11:36:14 +08:00
|
|
|
|
2022-09-28 23:38:54 +08:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
|
|
|
|
|
|
2020-07-01 10:27:40 +08:00
|
|
|
|
2017-09-06 21:04:44 -07:00
|
|
|
|
2016-07-03 22:05:11 +08:00
|
|
|
|
2014-03-29 15:30:40 +08:00
|
|
|
|
2013-03-08 21:29:23 +09:00
|
|
|
|
2013-12-06 15:00:58 +09:00
|
|
|
|
2013-04-26 11:55:17 +09:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2016-07-03 22:05:12 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-04-23 12:04:33 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2014-10-17 20:33:55 -07:00
|
|
|
|
2014-07-02 13:25:04 +08:00
|
|
|
|
2015-07-15 13:08:21 -07:00
|
|
|
|
2021-07-16 09:39:11 -05:00
|
|
|
|
2014-07-02 13:25:04 +08:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2013-06-27 13:04:08 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-05-06 16:47:23 +08:00
|
|
|
|
|
|
|
|
|
2016-09-06 11:02:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-20 11:11:35 +08:00
|
|
|
|
2016-09-06 11:02:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-24 18:21:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-09-06 11:02:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-09 13:19:53 -07:00
|
|
|
|
2013-06-27 13:04:08 +09:00
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
2016-05-20 09:22:03 -07:00
|
|
|
|
2022-04-28 11:18:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-09-06 11:02:03 -07:00
|
|
|
|
2016-08-06 21:09:41 +08:00
|
|
|
|
2016-01-08 16:57:48 -08:00
|
|
|
|
2013-06-27 13:04:08 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-02-09 20:21:44 +00:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-02-09 20:21:44 +00:00
|
|
|
|
2015-02-05 17:44:29 +08:00
|
|
|
|
2014-09-12 15:53:45 -07:00
|
|
|
|
2015-02-05 17:44:29 +08:00
|
|
|
|
2022-02-09 20:21:44 +00:00
|
|
|
|
2014-09-12 15:53:45 -07:00
|
|
|
|
|
|
|
|
|
2022-02-09 20:21:44 +00:00
|
|
|
|
2016-10-11 22:57:01 +08:00
|
|
|
|
2015-02-05 17:44:29 +08:00
|
|
|
|
2016-10-11 22:57:01 +08:00
|
|
|
|
2015-02-05 17:44:29 +08:00
|
|
|
|
2016-10-11 22:57:01 +08:00
|
|
|
|
2015-02-05 17:44:29 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
|
2016-10-11 22:57:01 +08:00
|
|
|
|
2015-02-05 17:44:29 +08:00
|
|
|
|
2015-08-07 18:42:09 +08:00
|
|
|
|
2022-02-09 20:21:44 +00:00
|
|
|
|
2018-07-27 18:15:16 +08:00
|
|
|
|
f2fs: don't drop compressed page cache in .{invalidate,release}page
For compressed inode, in .{invalidate,release}page, we will call
f2fs_invalidate_compress_pages() to drop all compressed page cache of
current inode.
But we don't need to drop compressed page cache synchronously in
.invalidatepage, because, all trancation paths of compressed physical
block has been covered with f2fs_invalidate_compress_page().
And also we don't need to drop compressed page cache synchronously
in .releasepage, because, if there is out-of-memory, we can count
on page cache reclaim on sbi->compress_inode.
BTW, this patch may fix the issue reported below:
https://lore.kernel.org/linux-f2fs-devel/20211202092812.197647-1-changfengnan@vivo.com/T/#u
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-12-16 17:13:56 +08:00
|
|
|
|
|
|
|
|
|
2022-02-09 20:21:44 +00:00
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
2022-02-09 20:21:44 +00:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2022-04-30 23:41:46 -04:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-04-30 23:41:46 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-01-30 11:39:08 -08:00
|
|
|
|
2022-04-30 23:41:46 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
2022-04-30 23:41:46 -04:00
|
|
|
|
|
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
|
|
|
|
|
|
2022-04-30 23:41:46 -04:00
|
|
|
|
2021-04-28 17:20:31 +08:00
|
|
|
|
2022-04-30 23:41:46 -04:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2022-02-09 20:22:07 +00:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-02-09 20:22:07 +00:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-02-09 20:22:07 +00:00
|
|
|
|
2013-10-24 17:53:29 +09:00
|
|
|
|
2022-02-09 20:22:07 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-09 13:19:53 -07:00
|
|
|
|
2022-08-31 10:24:40 +08:00
|
|
|
|
2022-02-09 20:22:07 +00:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-03-29 16:22:54 -04:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
2020-03-30 17:13:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-28 20:29:38 +08:00
|
|
|
|
2020-03-30 17:13:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-01-17 20:30:23 +09:00
|
|
|
|
|
|
|
|
|
2014-04-22 13:34:01 +08:00
|
|
|
|
2020-06-29 20:13:12 +08:00
|
|
|
|
2014-04-22 13:34:01 +08:00
|
|
|
|
2015-10-19 10:29:51 -07:00
|
|
|
|
2020-06-29 20:13:12 +08:00
|
|
|
|
2015-10-19 10:29:51 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-31 09:24:01 +09:00
|
|
|
|
2021-01-13 13:21:54 +08:00
|
|
|
|
2020-08-31 09:24:01 +09:00
|
|
|
|
2020-03-30 17:13:29 +08:00
|
|
|
|
2020-08-31 09:24:01 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-31 09:24:01 +09:00
|
|
|
|
2020-06-29 20:13:12 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-02-05 17:54:31 +08:00
|
|
|
|
|
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2021-04-13 18:10:37 +02:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
|
|
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
2021-04-13 18:10:37 +02:00
|
|
|
|
2022-01-07 12:48:44 -08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-26 14:29:26 +08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-03-01 12:58:44 +08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
2021-05-11 14:38:47 -07:00
|
|
|
|
2021-03-01 12:58:44 +08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-24 14:55:47 -08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2021-02-27 20:02:30 +08:00
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
|
|
|
|
|
2021-03-01 12:58:44 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
2021-03-01 12:58:44 +08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2021-03-01 12:58:44 +08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
|
|
2021-03-01 12:58:44 +08:00
|
|
|
|
2021-05-26 13:05:36 -07:00
|
|
|
|
2021-05-12 07:38:00 -07:00
|
|
|
|
2021-03-01 12:58:44 +08:00
|
|
|
|
|
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2020-11-24 15:19:10 -08:00
|
|
|
|
|
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
2021-05-11 14:38:47 -07:00
|
|
|
|
2021-03-01 12:58:44 +08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-10 20:24:44 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-09-08 11:44:11 +09:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
2020-12-26 18:07:41 +08:00
|
|
|
|
|
|
|
|
|
2019-12-27 18:44:56 +08:00
|
|
|
|
|
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
|
|
|
|
|
2022-10-04 09:11:33 +08:00
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
|
|
|
|
|
2019-12-27 18:44:56 +08:00
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-10-04 09:11:33 +08:00
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
2022-04-29 11:12:16 -04:00
|
|
|
|
2020-06-01 21:47:23 -07:00
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-06-27 13:04:08 +09:00
|
|
|
|
2022-02-09 20:22:07 +00:00
|
|
|
|
2022-06-06 10:47:21 -04:00
|
|
|
|
2022-02-09 20:21:44 +00:00
|
|
|
|
2022-04-30 23:41:46 -04:00
|
|
|
|
2021-07-23 00:59:21 -07:00
|
|
|
|
2013-01-17 20:30:23 +09:00
|
|
|
|
2019-07-01 19:15:29 -07:00
|
|
|
|
|
|
|
|
|
2012-11-02 17:10:12 +09:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
2017-12-04 20:25:25 -05:00
|
|
|
|
2018-05-26 18:03:35 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-12-04 20:25:25 -05:00
|
|
|
|
2018-05-26 18:03:35 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-18 11:09:48 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
2020-02-17 17:46:20 +08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-12-04 09:52:58 +08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-23 00:59:20 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f2fs: support direct I/O with fscrypt using blk-crypto
Encrypted files traditionally haven't supported DIO, due to the need to
encrypt/decrypt the data. However, when the encryption is implemented
using inline encryption (blk-crypto) instead of the traditional
filesystem-layer encryption, it is straightforward to support DIO.
Therefore, make f2fs support DIO on files that are using inline
encryption. Since f2fs uses iomap for DIO, and fscrypt support was
already added to iomap DIO, this just requires two small changes:
- Let DIO proceed when supported, by checking fscrypt_dio_supported()
instead of assuming that encrypted files never support DIO.
- In f2fs_iomap_begin(), use fscrypt_limit_io_blocks() to limit the
length of the mapping in the rare case where a DUN discontiguity
occurs in the middle of an extent. The iomap DIO implementation
requires this, since it assumes that it can submit a bio covering (up
to) the whole mapping, without checking fscrypt constraints itself.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20220128233940.79464-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2022-01-28 15:39:39 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-28 10:15:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-23 00:59:20 -07:00
|
|
|
|
2022-11-28 10:15:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-23 00:59:20 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-28 10:15:09 +01:00
|
|
|
|
|
|
|
|
|
2021-07-23 00:59:20 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
