kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-26 18:16:26 +00:00
Code Issues Releases Packages Activity
linux/drivers/thunderbolt/debugfs.c

1600 lines
38 KiB
Raw Permalink Normal View History

thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Add uaccess dependency to debugfs interface Some calls in the debugfs interface are made to the linux/uaccess.h header, but the header is not referenced. So, for x86_64 architectures, this dependency seems to be pulled in elsewhere, which leads to a successful compilation. However, on arm/arm64 architectures, it was found to error out on implicit declarations. This change fixes the implicit declaration error by adding the linux/uaccess.h header. Fixes: 54e418106c76 ("thunderbolt: Add debugfs interface") Signed-off-by: Casey Bowman <casey.g.bowman@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-10-07 16:13:07 -07:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Fix PCIe adapter capability length for USB4 v2 routers For USB4 v2 routers, the PCIe adapter capability length is longer. Display the correct capability length in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-01-25 11:48:14 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routers For USB4 v2 routers, the DisplayPort IN adapter capability length is longer. Display the correct capability length in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-01-25 11:48:13 +02:00
thunderbolt: Add two additional double words for adapters TMU for USB4 v2 routers For USB4 v2 routers, the adapters's TMU capability has two additional double words. Include them in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-01-25 11:48:12 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: debugfs: Fix spelling mistakes in seq_puts text There are a handful of spelling mistakes in seq_puts text. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-06 15:03:14 +01:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: debugfs: Fix spelling mistakes in seq_puts text There are a handful of spelling mistakes in seq_puts text. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-06 15:03:14 +01:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Make tb_switch_clx_disable() return CL states that were enabled This allows us to disable all CL states temporarily when running lane margining and then return back the previously enabled states. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-11-18 15:42:27 +02:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Make tb_switch_clx_disable() return CL states that were enabled This allows us to disable all CL states temporarily when running lane margining and then return back the previously enabled states. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-11-18 15:42:27 +02:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Make tb_switch_clx_disable() return CL states that were enabled This allows us to disable all CL states temporarily when running lane margining and then return back the previously enabled states. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-11-18 15:42:27 +02:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Make tb_switch_clx_disable() return CL states that were enabled This allows us to disable all CL states temporarily when running lane margining and then return back the previously enabled states. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-11-18 15:42:27 +02:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Make tb_switch_clx_disable() return CL states that were enabled This allows us to disable all CL states temporarily when running lane margining and then return back the previously enabled states. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-11-18 15:42:27 +02:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Fix memory leak in margining Memory for the usb4->margining needs to be relased for the upstream port of the router as well, even though the debugfs directory gets released with the router device removal. Fix this. Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-03-03 11:25:08 +02:00
thunderbolt: Fix memory leak in margining_port_remove() The dentry returned by debugfs_lookup() needs to be released by calling dput() which is missing in margining_port_remove(). Fix this by calling debugfs_lookup_and_remove() that combines both and avoids the memory leak. Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-11-22 16:02:43 +08:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Fix memory leak in margining Memory for the usb4->margining needs to be relased for the upstream port of the router as well, even though the debugfs directory gets released with the router device removal. Fix this. Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-03-03 11:25:08 +02:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Fix memory leak in margining Memory for the usb4->margining needs to be relased for the upstream port of the router as well, even though the debugfs directory gets released with the router device removal. Fix this. Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-03-03 11:25:08 +02:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Fix memory leak in margining Memory for the usb4->margining needs to be relased for the upstream port of the router as well, even though the debugfs directory gets released with the router device removal. Fix this. Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-03-03 11:25:08 +02:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: debugfs: Fix uninitialized return in counters_write() If the first line is in an invalid format then the "ret" value is uninitialized. We should return -EINVAL instead. Fixes: 54e418106c76 ("thunderbolt: Add debugfs interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-10 13:08:05 +03:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: debugfs: Handle fail reading block There are cases when reading block of dwords in single transaction fail, for several reasons, mostly if HW publish to implement all of the dwords, while actually it doesn't or if some dwords not accessible for read for security reasons. We handle these cases by trying to read the block, dword-by-dword, one dword per transaction, till we get a failure. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-02-16 15:04:26 +02:00
thunderbolt: debugfs: Show all accessible dwords Currently, when first failure occurs while reading of the block, we stop reading the block and jump to the next capability. This doesn't cover the case of block with "holes" of inaccessible dwords, followed by accessible dwords. This patch address this problem. In case of failure while reading the complete block in one transaction, (because of one or more dwords is inaccessible), we read the remaining dwords of the block dword-by-dword, one dword per transaction, till the end of the block. By doing this, we handle the case of block with "holes" of inaccessible dwords, followed by accessible dwords. The accessible dwords are shown with the fields: <offset> <relative_offset> <cap_id> <vs_cap_id> <value> E.g.: 0x01eb 236 0x05 0x06 0x0000d166 While the inaccesible dwords are shown as: <offset> <not accessible> E.g.: 0x01ed <not accessible> Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-09 11:23:30 +02:00
thunderbolt: debugfs: Handle fail reading block There are cases when reading block of dwords in single transaction fail, for several reasons, mostly if HW publish to implement all of the dwords, while actually it doesn't or if some dwords not accessible for read for security reasons. We handle these cases by trying to read the block, dword-by-dword, one dword per transaction, till we get a failure. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-02-16 15:04:26 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: debugfs: Show all accessible dwords Currently, when first failure occurs while reading of the block, we stop reading the block and jump to the next capability. This doesn't cover the case of block with "holes" of inaccessible dwords, followed by accessible dwords. This patch address this problem. In case of failure while reading the complete block in one transaction, (because of one or more dwords is inaccessible), we read the remaining dwords of the block dword-by-dword, one dword per transaction, till the end of the block. By doing this, we handle the case of block with "holes" of inaccessible dwords, followed by accessible dwords. The accessible dwords are shown with the fields: <offset> <relative_offset> <cap_id> <vs_cap_id> <value> E.g.: 0x01eb 236 0x05 0x06 0x0000d166 While the inaccesible dwords are shown as: <offset> <not accessible> E.g.: 0x01ed <not accessible> Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-09 11:23:30 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Add two additional double words for adapters TMU for USB4 v2 routers For USB4 v2 routers, the adapters's TMU capability has two additional double words. Include them in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-01-25 11:48:12 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Fix PCIe adapter capability length for USB4 v2 routers For USB4 v2 routers, the PCIe adapter capability length is longer. Display the correct capability length in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-01-25 11:48:14 +02:00
thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routers For USB4 v2 routers, the DisplayPort IN adapter capability length is longer. Display the correct capability length in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-01-25 11:48:13 +02:00
thunderbolt: Include the additional DP IN double word in debugfs dump When DisplayPort bandwidth allocation mode is supported by the DP IN adapter it has an extra double word in the adapter config space. Include this in the debugfs register dump. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-04-29 17:14:57 +03:00
thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routers For USB4 v2 routers, the DisplayPort IN adapter capability length is longer. Display the correct capability length in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-01-25 11:48:13 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: There are only 5 basic router registers in pre-USB4 routers Intel pre-USB4 routers only have ROUTER_CS_0 up to ROUTER_CS_4 and it immediately follows the TMU router registers. Correct this accordingly. Reported-by: Rajaram Regupathy <rajaram.regupathy@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-04-19 08:17:58 +03:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00
thunderbolt: Add support for receiver lane margining USB4 spec defines standard set of registers to be used for receiver lane margining. This is useful for I/O interface quality and electrical robustness validation during manufacturing. Expose receiver lane margining through new debugfs directory "margining" that is added under each connected USB4 port. Users can then run the margining by writing to the exposed attributes under that directory. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-02-22 19:31:47 +02:00
thunderbolt: Create debugfs directory automatically for services This allows service drivers to use it as parent directory if they need to add their own debugfs entries. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07 17:53:44 +03:00
thunderbolt: Add debugfs interface This adds debugfs interface that can be used for debugging possible issues in hardware/software. It exposes router and adapter config spaces through files like this: /sys/kernel/debug/thunderbolt/<DEVICE>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT1>/counters /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/regs /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/path /sys/kernel/debug/thunderbolt/<DEVICE>/<PORT2>/counters ... The "regs" is either the router or port configuration space register dump. The "path" is the port path configuration space and "counters" is the optional counters configuration space. These files contains one register per line so it should be easy to use normal filtering tools to find the registers of interest if needed. The router and adapter regs file becomes writable when CONFIG_USB4_DEBUGFS_WRITE is enabled (which is not supposed to be done in production systems) and in this case the developer can write "offset value" lines there to modify the hardware directly. For convenience this also supports the long format the read side produces (but ignores the additional fields). The counters file can be written even when CONFIG_USB4_DEBUGFS_WRITE is not enabled and it is only used to clear the counter values. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 20:30:52 +03:00