linux/security/landlock/task.c

325 lines
8.5 KiB

landlock: Add signal scoping Currently, a sandbox process is not restricted to sending a signal (e.g. SIGKILL) to a process outside the sandbox environment. The ability to send a signal for a sandboxed process should be scoped the same way abstract UNIX sockets are scoped. Therefore, we extend the "scoped" field in a ruleset with LANDLOCK_SCOPE_SIGNAL to specify that a ruleset will deny sending any signal from within a sandbox process to its parent (i.e. any parent sandbox or non-sandboxed processes). This patch adds file_set_fowner and file_free_security hooks to set and release a pointer to the file owner's domain. This pointer, fown_domain in landlock_file_security will be used in file_send_sigiotask to check if the process can send a signal. The ruleset_with_unknown_scope test is updated to support LANDLOCK_SCOPE_SIGNAL. This depends on two new changes: - commit 1934b212615d ("file: reclaim 24 bytes from f_owner"): replace container_of(fown, struct file, f_owner) with fown->file . - commit 26f204380a3c ("fs: Fix file_set_fowner LSM hook inconsistencies"): lock before calling the hook. Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com> Closes: https://github.com/landlock-lsm/linux/issues/8 Link: https://lore.kernel.org/r/df2b4f880a2ed3042992689a793ea0951f6798a5.1725657727.git.fahimitahera@gmail.com [mic: Update landlock_get_current_domain()'s return type, improve and fix locking in hook_file_set_fowner(), simplify and fix sleepable call and locking issue in hook_file_send_sigiotask() and rebase on the latest VFS tree, simplify hook_task_kill() and quickly return when not sandboxed, improve comments, rename LANDLOCK_SCOPED_SIGNAL] Co-developed-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Mickaël Salaün <mic@digikod.net>
2024-09-06 15:30:03 -06:00
landlock: Add signal scoping Currently, a sandbox process is not restricted to sending a signal (e.g. SIGKILL) to a process outside the sandbox environment. The ability to send a signal for a sandboxed process should be scoped the same way abstract UNIX sockets are scoped. Therefore, we extend the "scoped" field in a ruleset with LANDLOCK_SCOPE_SIGNAL to specify that a ruleset will deny sending any signal from within a sandbox process to its parent (i.e. any parent sandbox or non-sandboxed processes). This patch adds file_set_fowner and file_free_security hooks to set and release a pointer to the file owner's domain. This pointer, fown_domain in landlock_file_security will be used in file_send_sigiotask to check if the process can send a signal. The ruleset_with_unknown_scope test is updated to support LANDLOCK_SCOPE_SIGNAL. This depends on two new changes: - commit 1934b212615d ("file: reclaim 24 bytes from f_owner"): replace container_of(fown, struct file, f_owner) with fown->file . - commit 26f204380a3c ("fs: Fix file_set_fowner LSM hook inconsistencies"): lock before calling the hook. Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com> Closes: https://github.com/landlock-lsm/linux/issues/8 Link: https://lore.kernel.org/r/df2b4f880a2ed3042992689a793ea0951f6798a5.1725657727.git.fahimitahera@gmail.com [mic: Update landlock_get_current_domain()'s return type, improve and fix locking in hook_file_set_fowner(), simplify and fix sleepable call and locking issue in hook_file_send_sigiotask() and rebase on the latest VFS tree, simplify hook_task_kill() and quickly return when not sandboxed, improve comments, rename LANDLOCK_SCOPED_SIGNAL] Co-developed-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Mickaël Salaün <mic@digikod.net>
2024-09-06 15:30:03 -06:00
landlock: Add signal scoping Currently, a sandbox process is not restricted to sending a signal (e.g. SIGKILL) to a process outside the sandbox environment. The ability to send a signal for a sandboxed process should be scoped the same way abstract UNIX sockets are scoped. Therefore, we extend the "scoped" field in a ruleset with LANDLOCK_SCOPE_SIGNAL to specify that a ruleset will deny sending any signal from within a sandbox process to its parent (i.e. any parent sandbox or non-sandboxed processes). This patch adds file_set_fowner and file_free_security hooks to set and release a pointer to the file owner's domain. This pointer, fown_domain in landlock_file_security will be used in file_send_sigiotask to check if the process can send a signal. The ruleset_with_unknown_scope test is updated to support LANDLOCK_SCOPE_SIGNAL. This depends on two new changes: - commit 1934b212615d ("file: reclaim 24 bytes from f_owner"): replace container_of(fown, struct file, f_owner) with fown->file . - commit 26f204380a3c ("fs: Fix file_set_fowner LSM hook inconsistencies"): lock before calling the hook. Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com> Closes: https://github.com/landlock-lsm/linux/issues/8 Link: https://lore.kernel.org/r/df2b4f880a2ed3042992689a793ea0951f6798a5.1725657727.git.fahimitahera@gmail.com [mic: Update landlock_get_current_domain()'s return type, improve and fix locking in hook_file_set_fowner(), simplify and fix sleepable call and locking issue in hook_file_send_sigiotask() and rebase on the latest VFS tree, simplify hook_task_kill() and quickly return when not sandboxed, improve comments, rename LANDLOCK_SCOPED_SIGNAL] Co-developed-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Mickaël Salaün <mic@digikod.net>
2024-09-06 15:30:03 -06:00
landlock: Add signal scoping Currently, a sandbox process is not restricted to sending a signal (e.g. SIGKILL) to a process outside the sandbox environment. The ability to send a signal for a sandboxed process should be scoped the same way abstract UNIX sockets are scoped. Therefore, we extend the "scoped" field in a ruleset with LANDLOCK_SCOPE_SIGNAL to specify that a ruleset will deny sending any signal from within a sandbox process to its parent (i.e. any parent sandbox or non-sandboxed processes). This patch adds file_set_fowner and file_free_security hooks to set and release a pointer to the file owner's domain. This pointer, fown_domain in landlock_file_security will be used in file_send_sigiotask to check if the process can send a signal. The ruleset_with_unknown_scope test is updated to support LANDLOCK_SCOPE_SIGNAL. This depends on two new changes: - commit 1934b212615d ("file: reclaim 24 bytes from f_owner"): replace container_of(fown, struct file, f_owner) with fown->file . - commit 26f204380a3c ("fs: Fix file_set_fowner LSM hook inconsistencies"): lock before calling the hook. Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com> Closes: https://github.com/landlock-lsm/linux/issues/8 Link: https://lore.kernel.org/r/df2b4f880a2ed3042992689a793ea0951f6798a5.1725657727.git.fahimitahera@gmail.com [mic: Update landlock_get_current_domain()'s return type, improve and fix locking in hook_file_set_fowner(), simplify and fix sleepable call and locking issue in hook_file_send_sigiotask() and rebase on the latest VFS tree, simplify hook_task_kill() and quickly return when not sandboxed, improve comments, rename LANDLOCK_SCOPED_SIGNAL] Co-developed-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Mickaël Salaün <mic@digikod.net>
2024-09-06 15:30:03 -06:00
selinux: remove the runtime disable functionality After working with the larger SELinux-based distros for several years, we're finally at a place where we can disable the SELinux runtime disable functionality. The existing kernel deprecation notice explains the functionality and why we want to remove it: The selinuxfs "disable" node allows SELinux to be disabled at runtime prior to a policy being loaded into the kernel. If disabled via this mechanism, SELinux will remain disabled until the system is rebooted. The preferred method of disabling SELinux is via the "selinux=0" boot parameter, but the selinuxfs "disable" node was created to make it easier for systems with primitive bootloaders that did not allow for easy modification of the kernel command line. Unfortunately, allowing for SELinux to be disabled at runtime makes it difficult to secure the kernel's LSM hooks using the "__ro_after_init" feature. It is that last sentence, mentioning the '__ro_after_init' hardening, which is the real motivation for this change, and if you look at the diffstat you'll see that the impact of this patch reaches across all the different LSMs, helping prevent tampering at the LSM hook level. From a SELinux perspective, it is important to note that if you continue to disable SELinux via "/etc/selinux/config" it may appear that SELinux is disabled, but it is simply in an uninitialized state. If you load a policy with `load_policy -i`, you will see SELinux come alive just as if you had loaded the policy during early-boot. It is also worth noting that the "/sys/fs/selinux/disable" file is always writable now, regardless of the Kconfig settings, but writing to the file has no effect on the system, other than to display an error on the console if a non-zero/true value is written. Finally, in the several years where we have been working on deprecating this functionality, there has only been one instance of someone mentioning any user visible breakage. In this particular case it was an individual's kernel test system, and the workaround documented in the deprecation notice ("selinux=0" on the kernel command line) resolved the issue without problem. Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-17 12:43:07 -04:00
landlock: Add signal scoping Currently, a sandbox process is not restricted to sending a signal (e.g. SIGKILL) to a process outside the sandbox environment. The ability to send a signal for a sandboxed process should be scoped the same way abstract UNIX sockets are scoped. Therefore, we extend the "scoped" field in a ruleset with LANDLOCK_SCOPE_SIGNAL to specify that a ruleset will deny sending any signal from within a sandbox process to its parent (i.e. any parent sandbox or non-sandboxed processes). This patch adds file_set_fowner and file_free_security hooks to set and release a pointer to the file owner's domain. This pointer, fown_domain in landlock_file_security will be used in file_send_sigiotask to check if the process can send a signal. The ruleset_with_unknown_scope test is updated to support LANDLOCK_SCOPE_SIGNAL. This depends on two new changes: - commit 1934b212615d ("file: reclaim 24 bytes from f_owner"): replace container_of(fown, struct file, f_owner) with fown->file . - commit 26f204380a3c ("fs: Fix file_set_fowner LSM hook inconsistencies"): lock before calling the hook. Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com> Closes: https://github.com/landlock-lsm/linux/issues/8 Link: https://lore.kernel.org/r/df2b4f880a2ed3042992689a793ea0951f6798a5.1725657727.git.fahimitahera@gmail.com [mic: Update landlock_get_current_domain()'s return type, improve and fix locking in hook_file_set_fowner(), simplify and fix sleepable call and locking issue in hook_file_send_sigiotask() and rebase on the latest VFS tree, simplify hook_task_kill() and quickly return when not sandboxed, improve comments, rename LANDLOCK_SCOPED_SIGNAL] Co-developed-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Mickaël Salaün <mic@digikod.net>
2024-09-06 15:30:03 -06:00
LSM: Identify modules by more than name Create a struct lsm_id to contain identifying information about Linux Security Modules (LSMs). At inception this contains the name of the module and an identifier associated with the security module. Change the security_add_hooks() interface to use this structure. Change the individual modules to maintain their own struct lsm_id and pass it to security_add_hooks(). The values are for LSM identifiers are defined in a new UAPI header file linux/lsm.h. Each existing LSM has been updated to include it's LSMID in the lsm_id. The LSM ID values are sequential, with the oldest module LSM_ID_CAPABILITY being the lowest value and the existing modules numbered in the order they were included in the main line kernel. This is an arbitrary convention for assigning the values, but none better presents itself. The value 0 is defined as being invalid. The values 1-99 are reserved for any special case uses which may arise in the future. This may include attributes of the LSM infrastructure itself, possibly related to namespacing or network attribute management. A special range is identified for such attributes to help reduce confusion for developers unfamiliar with LSMs. LSM attribute values are defined for the attributes presented by modules that are available today. As with the LSM IDs, The value 0 is defined as being invalid. The values 1-99 are reserved for any special case uses which may arise in the future. Cc: linux-security-module <linux-security-module@vger.kernel.org> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Mickael Salaun <mic@digikod.net> Reviewed-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org> Nacked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [PM: forward ported beyond v6.6 due merge window changes] Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-09-12 13:56:46 -07:00