linux/arch/powerpc/Makefile

415 lines
14 KiB

powerpc: Don't add -mabi= flags when building with Clang When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
2019-11-18 21:57:10 -07:00
powerpc: Don't add -mabi= flags when building with Clang When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
2019-11-18 21:57:10 -07:00
powerpc: Remove linker flag from KBUILD_AFLAGS When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it points out that KBUILD_AFLAGS contains a linker flag, which will be unused: clang: error: -Wl,-a32: 'linker' input unused [-Werror,-Wunused-command-line-argument] This was likely supposed to be '-Wa,-a$(BITS)'. However, this change is unnecessary, as all supported versions of clang and gcc will pass '-a64' or '-a32' to GNU as based on the value of '-m'; the behavior of the latest stable release of the oldest supported major version of each compiler is shown below and each compiler's latest release exhibits the same behavior (GCC 12.2.0 and Clang 15.0.6). $ powerpc64-linux-gcc --version | head -1 powerpc64-linux-gcc (GCC) 5.5.0 $ powerpc64-linux-gcc -m64 -### -x assembler-with-cpp -c -o /dev/null /dev/null &| grep 'as ' .../as -a64 -mppc64 -many -mbig -o /dev/null /tmp/cctwuBzZ.s $ powerpc64-linux-gcc -m32 -### -x assembler-with-cpp -c -o /dev/null /dev/null &| grep 'as ' .../as -a32 -mppc -many -mbig -o /dev/null /tmp/ccaZP4mF.sg $ clang --version | head -1 Ubuntu clang version 11.1.0-++20211011094159+1fdec59bffc1-1~exp1~20211011214622.5 $ clang --target=powerpc64-linux-gnu -fno-integrated-as -m64 -### \ -x assembler-with-cpp -c -o /dev/null /dev/null &| grep gnu-as "/usr/bin/powerpc64-linux-gnu-as" "-a64" "-mppc64" "-many" "-o" "/dev/null" "/tmp/null-80267c.s" $ clang --target=powerpc64-linux-gnu -fno-integrated-as -m64 -### \ -x assembler-with-cpp -c -o /dev/null /dev/null &| grep gnu-as "/usr/bin/powerpc64-linux-gnu-as" "-a32" "-mppc" "-many" "-o" "/dev/null" "/tmp/null-ab8f8d.s" Remove this flag altogether to avoid future issues. Fixes: 1421dc6d4829 ("powerpc/kbuild: Use flags variables rather than overriding LD/CC/AS") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-11 20:05:02 -07:00
powerpc: Don't add -mabi= flags when building with Clang When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
2019-11-18 21:57:10 -07:00
powerpc/64: Always build with 128-bit long double The amdgpu driver builds some of its code with hard-float enabled, whereas the rest of the kernel is built with soft-float. When building with 64-bit long double, if soft-float and hard-float objects are linked together, the build fails due to incompatible ABI tags. In the past there have been build errors in the amdgpu driver caused by this, some of those were due to bad intermingling of soft & hard-float code, but those issues have now all been fixed since commit 58ddbecb14c7 ("drm/amd/display: move remaining FPU code to dml folder"). However it's still possible for soft & hard-float objects to end up linked together, if the amdgpu driver is built-in to the kernel along with the test_emulate_step.c code, which uses soft-float. That happens in an allyesconfig build. Currently those build errors are avoided because the amdgpu driver is gated on 128-bit long double being enabled. But that's not a detail the amdgpu driver should need to be aware of, and if another driver starts using hard-float the same problem would occur. All versions of the 64-bit ABI specify that long-double is 128-bits. However some compilers, notably the kernel.org ones, are built to use 64-bit long double by default. Apart from this issue of soft vs hard-float, the kernel doesn't care what size long double is. In particular the kernel using 128-bit long double doesn't impact userspace's ability to use 64-bit long double, as musl does. So always build the 64-bit kernel with 128-bit long double. That should avoid any build errors due to the incompatible ABI tags. Excluding the code that uses soft/hard-float, the vmlinux is identical with/without the flag. It does mean any code which is incorrectly intermingling soft & hard-float code will build without error, so those bugs will need to be caught by testing rather than at build time. For more background see: - commit d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine") - commit c653c591789b ("drm/amdgpu: Re-enable DCN for 64-bit powerpc") - https://lore.kernel.org/r/dab9cbd8-2626-4b99-8098-31fe76397d2d@app.fastmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Link: https://msgid.link/20230404102847.3303623-1-mpe@ellerman.id.au
2023-04-04 20:28:47 +10:00
powerpc/32: Avoid unsupported flags with clang When building for ppc32 with clang these flags are unsupported: -ffixed-r2 and -mmultiple llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on when building for SVR4ABI and !ppc64: // The SVR4 ABI reserves r2 and r13 if (Subtarget.isSVR4ABI()) { // We only reserve r2 if we need to use the TOC pointer. If we have no // explicit uses of the TOC pointer (meaning we're a leaf function with // no constant-pool loads, etc.) and we have no potential uses inside an // inline asm block, then we can treat r2 has an ordinary callee-saved // register. const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm()) markSuperRegs(Reserved, PPC::R2); // System-reserved register markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register } This means we can safely omit -ffixed-r2 when building for 32-bit targets. The -mmultiple/-mno-multiple flags are not supported by clang, so platforms that might support multiple miss out on using multiple word instructions. We wrap these flags in cc-option so that when Clang gains support the kernel will be able use these flags. Clang 8 can then build a ppc44x_defconfig which boots in Qemu: make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-system-ppc -M bamboo \ -kernel arch/powerpc/boot/zImage \ -dtb arch/powerpc/boot/dts/bamboo.dtb \ -initrd ~/ppc32-440-rootfs.cpio \ -nographic -serial stdio -monitor pty -append "console=ttyS0" Link: https://github.com/ClangBuiltLinux/linux/issues/261 Link: https://bugs.llvm.org/show_bug.cgi?id=39556 Link: https://bugs.llvm.org/show_bug.cgi?id=39555 Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-12 15:58:06 +10:30
powerpc/32: Avoid unsupported flags with clang When building for ppc32 with clang these flags are unsupported: -ffixed-r2 and -mmultiple llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on when building for SVR4ABI and !ppc64: // The SVR4 ABI reserves r2 and r13 if (Subtarget.isSVR4ABI()) { // We only reserve r2 if we need to use the TOC pointer. If we have no // explicit uses of the TOC pointer (meaning we're a leaf function with // no constant-pool loads, etc.) and we have no potential uses inside an // inline asm block, then we can treat r2 has an ordinary callee-saved // register. const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm()) markSuperRegs(Reserved, PPC::R2); // System-reserved register markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register } This means we can safely omit -ffixed-r2 when building for 32-bit targets. The -mmultiple/-mno-multiple flags are not supported by clang, so platforms that might support multiple miss out on using multiple word instructions. We wrap these flags in cc-option so that when Clang gains support the kernel will be able use these flags. Clang 8 can then build a ppc44x_defconfig which boots in Qemu: make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-system-ppc -M bamboo \ -kernel arch/powerpc/boot/zImage \ -dtb arch/powerpc/boot/dts/bamboo.dtb \ -initrd ~/ppc32-440-rootfs.cpio \ -nographic -serial stdio -monitor pty -append "console=ttyS0" Link: https://github.com/ClangBuiltLinux/linux/issues/261 Link: https://bugs.llvm.org/show_bug.cgi?id=39556 Link: https://bugs.llvm.org/show_bug.cgi?id=39555 Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-12 15:58:06 +10:30
powerpc/32: Avoid unsupported flags with clang When building for ppc32 with clang these flags are unsupported: -ffixed-r2 and -mmultiple llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on when building for SVR4ABI and !ppc64: // The SVR4 ABI reserves r2 and r13 if (Subtarget.isSVR4ABI()) { // We only reserve r2 if we need to use the TOC pointer. If we have no // explicit uses of the TOC pointer (meaning we're a leaf function with // no constant-pool loads, etc.) and we have no potential uses inside an // inline asm block, then we can treat r2 has an ordinary callee-saved // register. const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm()) markSuperRegs(Reserved, PPC::R2); // System-reserved register markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register } This means we can safely omit -ffixed-r2 when building for 32-bit targets. The -mmultiple/-mno-multiple flags are not supported by clang, so platforms that might support multiple miss out on using multiple word instructions. We wrap these flags in cc-option so that when Clang gains support the kernel will be able use these flags. Clang 8 can then build a ppc44x_defconfig which boots in Qemu: make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-system-ppc -M bamboo \ -kernel arch/powerpc/boot/zImage \ -dtb arch/powerpc/boot/dts/bamboo.dtb \ -initrd ~/ppc32-440-rootfs.cpio \ -nographic -serial stdio -monitor pty -append "console=ttyS0" Link: https://github.com/ClangBuiltLinux/linux/issues/261 Link: https://bugs.llvm.org/show_bug.cgi?id=39556 Link: https://bugs.llvm.org/show_bug.cgi?id=39555 Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-12 15:58:06 +10:30
powerpc/ftrace: Add support for -fpatchable-function-entry GCC v13.1 updated support for -fpatchable-function-entry on ppc64le to emit nops after the local entry point, rather than before it. This allows us to use this in the kernel for ftrace purposes. A new script is added under arch/powerpc/tools/ to help detect if nops are emitted after the function local entry point, or before the global entry point. With -fpatchable-function-entry, we no longer have the profiling instructions generated at function entry, so we only need to validate the presence of two nops at the ftrace location in ftrace_init_nop(). We patch the preceding instruction with 'mflr r0' to match the -mprofile-kernel ABI for subsequent ftrace use. This changes the profiling instructions used on ppc32. The default -pg option emits an additional 'stw' instruction after 'mflr r0' and before the branch to _mcount 'bl _mcount'. This is very similar to the original -mprofile-kernel implementation on ppc64le, where an additional 'std' instruction was used to save LR to its save location in the caller's stackframe. Subsequently, this additional store was removed in later compiler versions for performance reasons. The same reasons apply for ppc32 so we only patch in a 'mflr r0'. Signed-off-by: Naveen N Rao <naveen@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/68586d22981a2c3bb45f27a2b621173d10a7d092.1687166935.git.naveen@kernel.org
2023-06-19 15:17:34 +05:30
powerpc/ftrace: Add support for -fpatchable-function-entry GCC v13.1 updated support for -fpatchable-function-entry on ppc64le to emit nops after the local entry point, rather than before it. This allows us to use this in the kernel for ftrace purposes. A new script is added under arch/powerpc/tools/ to help detect if nops are emitted after the function local entry point, or before the global entry point. With -fpatchable-function-entry, we no longer have the profiling instructions generated at function entry, so we only need to validate the presence of two nops at the ftrace location in ftrace_init_nop(). We patch the preceding instruction with 'mflr r0' to match the -mprofile-kernel ABI for subsequent ftrace use. This changes the profiling instructions used on ppc32. The default -pg option emits an additional 'stw' instruction after 'mflr r0' and before the branch to _mcount 'bl _mcount'. This is very similar to the original -mprofile-kernel implementation on ppc64le, where an additional 'std' instruction was used to save LR to its save location in the caller's stackframe. Subsequently, this additional store was removed in later compiler versions for performance reasons. The same reasons apply for ppc32 so we only patch in a 'mflr r0'. Signed-off-by: Naveen N Rao <naveen@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/68586d22981a2c3bb45f27a2b621173d10a7d092.1687166935.git.naveen@kernel.org
2023-06-19 15:17:34 +05:30
powerpc: Fix 64 bit builds with binutils 2.24 With binutils 2.24, various 64 bit builds fail with relocation errors such as arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e': (.text+0x165ee): relocation truncated to fit: R_PPC64_ADDR16_HI against symbol `interrupt_base_book3e' defined in .text section in arch/powerpc/kernel/built-in.o arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e': (.text+0x16602): relocation truncated to fit: R_PPC64_ADDR16_HI against symbol `interrupt_end_book3e' defined in .text section in arch/powerpc/kernel/built-in.o The assembler maintainer says: I changed the ABI, something that had to be done but unfortunately happens to break the booke kernel code. When building up a 64-bit value with lis, ori, shl, oris, ori or similar sequences, you now should use @high and @higha in place of @h and @ha. @h and @ha (and their associated relocs R_PPC64_ADDR16_HI and R_PPC64_ADDR16_HA) now report overflow if the value is out of 32-bit signed range. ie. @h and @ha assume you're building a 32-bit value. This is needed to report out-of-range -mcmodel=medium toc pointer offsets in @toc@h and @toc@ha expressions, and for consistency I did the same for all other @h and @ha relocs. Replacing @h with @high in one strategic location fixes the relocation errors. This has to be done conditionally since the assembler either supports @h or @high but not both. Cc: <stable@vger.kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-15 09:33:42 -07:00
powerpc/64: vmlinux support building with PCREL addresing PC-Relative or PCREL addressing is an extension to the ELF ABI which uses Power ISA v3.1 PC-relative instructions to calculate addresses, rather than the traditional TOC scheme. Add an option to build vmlinux using pcrel addressing. Modules continue to use TOC addressing. - TOC address helpers and r2 are poisoned with -1 when running vmlinux. r2 could be used for something useful once things are ironed out. - Assembly must call C functions with @notoc annotation, or the linker complains aobut a missing nop after the call. This is done with the CFUNC macro introduced earlier. - Boot: with the exception of prom_init, the execution branches to the kernel virtual address early in boot, before any addresses are generated, which ensures 34-bit pcrel addressing does not miss the high PAGE_OFFSET bits. TOC relative addressing has a similar requirement. prom_init does not go to the virtual address and its addresses should not carry over to the post-prom kernel. - Ftrace trampolines are converted from TOC addressing to pcrel addressing, including module ftrace trampolines that currently use the kernel TOC to find ftrace target functions. - BPF function prologue and function calling generation are converted from TOC to pcrel. - copypage_64.S has an interesting problem, prefixed instructions have alignment restrictions so the linker can add padding, which makes the assembler treat the difference between two local labels as non-constant even if alignment is arranged so padding is not required. This may need toolchain help to solve nicely, for now move the prefix instruction out of the alternate patch section to work around it. This reduces kernel text size by about 6%. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com
2023-04-08 12:17:51 +10:00
powerpc/64: vmlinux support building with PCREL addresing PC-Relative or PCREL addressing is an extension to the ELF ABI which uses Power ISA v3.1 PC-relative instructions to calculate addresses, rather than the traditional TOC scheme. Add an option to build vmlinux using pcrel addressing. Modules continue to use TOC addressing. - TOC address helpers and r2 are poisoned with -1 when running vmlinux. r2 could be used for something useful once things are ironed out. - Assembly must call C functions with @notoc annotation, or the linker complains aobut a missing nop after the call. This is done with the CFUNC macro introduced earlier. - Boot: with the exception of prom_init, the execution branches to the kernel virtual address early in boot, before any addresses are generated, which ensures 34-bit pcrel addressing does not miss the high PAGE_OFFSET bits. TOC relative addressing has a similar requirement. prom_init does not go to the virtual address and its addresses should not carry over to the post-prom kernel. - Ftrace trampolines are converted from TOC addressing to pcrel addressing, including module ftrace trampolines that currently use the kernel TOC to find ftrace target functions. - BPF function prologue and function calling generation are converted from TOC to pcrel. - copypage_64.S has an interesting problem, prefixed instructions have alignment restrictions so the linker can add padding, which makes the assembler treat the difference between two local labels as non-constant even if alignment is arranged so padding is not required. This may need toolchain help to solve nicely, for now move the prefix instruction out of the alternate patch section to work around it. This reduces kernel text size by about 6%. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com
2023-04-08 12:17:51 +10:00
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 05:18:34 +11:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
2024-10-09 12:26:09 -07:00
2024-10-09 12:26:09 -07:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00