License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2007-10-19 23:21:04 +02:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-11-16 23:57:37 -05:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-03-26 01:37:12 -08:00
|
|
|
|
2010-04-29 20:33:35 +02:00
|
|
|
|
2011-01-07 17:50:05 +11:00
|
|
|
|
fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".
Why we need this
~~~~~~~~~~~~~~~~
The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.
Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions. But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic. This is because it depends on
whether the files are currently present in the inode cache.
Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work. Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons. First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.
Second, almost all users of fscrypt actually do need the keys to be
global. The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process. This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.
On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2]. This is ugly and raises security concerns. Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).
By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.
Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:
- Supporting key removal with the semantics such that the secret is
removed immediately and any unused inodes using the key are evicted;
also, the eviction of any in-use inodes can be retried.
- Calculating a key-dependent cryptographic identifier and returning it
to userspace.
- Allowing keys to be added and removed by non-root users, but only keys
for v2 encryption policies; and to prevent denial-of-service attacks,
users can only remove keys they themselves have added, and a key is
only really removed after all users who added it have removed it.
Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.
However, to reuse code the implementation still uses the keyrings
service internally. Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.
References:
[1] https://github.com/google/fscrypt
[2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
[3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
[4] https://github.com/google/fscrypt/issues/116
[5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
[6] https://github.com/google/fscrypt/issues/128
[7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-04 19:35:46 -07:00
|
|
|
|
2012-02-13 03:58:52 +00:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2016-05-24 09:29:01 -05:00
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
2018-11-01 23:07:23 +00:00
|
|
|
|
2008-03-22 15:48:17 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2015-02-02 10:07:59 -07:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-27 12:51:30 +01:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-27 12:51:30 +01:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2023-11-27 12:51:30 +01:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-27 12:51:30 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2023-11-27 12:51:30 +01:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:51 +02:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-11 17:44:44 +08:00
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
|
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
|
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
|
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
|
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
2023-08-18 16:00:49 +02:00
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
2013-07-19 21:12:31 +04:00
|
|
|
|
2015-02-12 14:58:51 -08:00
|
|
|
|
2011-07-08 14:14:44 +10:00
|
|
|
|
list_lru: introduce list_lru_shrink_{count,walk}
Kmem accounting of memcg is unusable now, because it lacks slab shrinker
support. That means when we hit the limit we will get ENOMEM w/o any
chance to recover. What we should do then is to call shrink_slab, which
would reclaim old inode/dentry caches from this cgroup. This is what
this patch set is intended to do.
Basically, it does two things. First, it introduces the notion of
per-memcg slab shrinker. A shrinker that wants to reclaim objects per
cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be
passed the memory cgroup to scan from in shrink_control->memcg. For
such shrinkers shrink_slab iterates over the whole cgroup subtree under
the target cgroup and calls the shrinker for each kmem-active memory
cgroup.
Secondly, this patch set makes the list_lru structure per-memcg. It's
done transparently to list_lru users - everything they have to do is to
tell list_lru_init that they want memcg-aware list_lru. Then the
list_lru will automatically distribute objects among per-memcg lists
basing on which cgroup the object is accounted to. This way to make FS
shrinkers (icache, dcache) memcg-aware we only need to make them use
memcg-aware list_lru, and this is what this patch set does.
As before, this patch set only enables per-memcg kmem reclaim when the
pressure goes from memory.limit, not from memory.kmem.limit. Handling
memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and
it is still unclear whether we will have this knob in the unified
hierarchy.
This patch (of 9):
NUMA aware slab shrinkers use the list_lru structure to distribute
objects coming from different NUMA nodes to different lists. Whenever
such a shrinker needs to count or scan objects from a particular node,
it issues commands like this:
count = list_lru_count_node(lru, sc->nid);
freed = list_lru_walk_node(lru, sc->nid, isolate_func,
isolate_arg, &sc->nr_to_scan);
where sc is an instance of the shrink_control structure passed to it
from vmscan.
To simplify this, let's add special list_lru functions to be used by
shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which
consolidate the nid and nr_to_scan arguments in the shrink_control
structure.
This will also allow us to avoid patching shrinkers that use list_lru
when we make shrink_slab() per-memcg - all we will have to do is extend
the shrink_control structure to include the target memcg and make
list_lru_shrink_{count,walk} handle this appropriately.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 14:58:47 -08:00
|
|
|
|
|
|
|
|
|
2025-04-28 21:50:50 +08:00
|
|
|
|
2014-05-17 20:56:38 +09:00
|
|
|
|
|
|
|
|
|
2011-07-08 14:14:44 +10:00
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
2013-08-28 10:18:00 +10:00
|
|
|
|
2013-08-28 10:17:58 +10:00
|
|
|
|
list_lru: introduce list_lru_shrink_{count,walk}
Kmem accounting of memcg is unusable now, because it lacks slab shrinker
support. That means when we hit the limit we will get ENOMEM w/o any
chance to recover. What we should do then is to call shrink_slab, which
would reclaim old inode/dentry caches from this cgroup. This is what
this patch set is intended to do.
Basically, it does two things. First, it introduces the notion of
per-memcg slab shrinker. A shrinker that wants to reclaim objects per
cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be
passed the memory cgroup to scan from in shrink_control->memcg. For
such shrinkers shrink_slab iterates over the whole cgroup subtree under
the target cgroup and calls the shrinker for each kmem-active memory
cgroup.
Secondly, this patch set makes the list_lru structure per-memcg. It's
done transparently to list_lru users - everything they have to do is to
tell list_lru_init that they want memcg-aware list_lru. Then the
list_lru will automatically distribute objects among per-memcg lists
basing on which cgroup the object is accounted to. This way to make FS
shrinkers (icache, dcache) memcg-aware we only need to make them use
memcg-aware list_lru, and this is what this patch set does.
As before, this patch set only enables per-memcg kmem reclaim when the
pressure goes from memory.limit, not from memory.kmem.limit. Handling
memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and
it is still unclear whether we will have this knob in the unified
hierarchy.
This patch (of 9):
NUMA aware slab shrinkers use the list_lru structure to distribute
objects coming from different NUMA nodes to different lists. Whenever
such a shrinker needs to count or scan objects from a particular node,
it issues commands like this:
count = list_lru_count_node(lru, sc->nid);
freed = list_lru_walk_node(lru, sc->nid, isolate_func,
isolate_arg, &sc->nr_to_scan);
where sc is an instance of the shrink_control structure passed to it
from vmscan.
To simplify this, let's add special list_lru functions to be used by
shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which
consolidate the nid and nr_to_scan arguments in the shrink_control
structure.
This will also allow us to avoid patching shrinkers that use list_lru
when we make shrink_slab() per-memcg - all we will have to do is extend
the shrink_control structure to include the target memcg and make
list_lru_shrink_{count,walk} handle this appropriately.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 14:58:47 -08:00
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-02-12 14:59:17 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
2015-02-12 14:59:17 -08:00
|
|
|
|
list_lru: introduce list_lru_shrink_{count,walk}
Kmem accounting of memcg is unusable now, because it lacks slab shrinker
support. That means when we hit the limit we will get ENOMEM w/o any
chance to recover. What we should do then is to call shrink_slab, which
would reclaim old inode/dentry caches from this cgroup. This is what
this patch set is intended to do.
Basically, it does two things. First, it introduces the notion of
per-memcg slab shrinker. A shrinker that wants to reclaim objects per
cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be
passed the memory cgroup to scan from in shrink_control->memcg. For
such shrinkers shrink_slab iterates over the whole cgroup subtree under
the target cgroup and calls the shrinker for each kmem-active memory
cgroup.
Secondly, this patch set makes the list_lru structure per-memcg. It's
done transparently to list_lru users - everything they have to do is to
tell list_lru_init that they want memcg-aware list_lru. Then the
list_lru will automatically distribute objects among per-memcg lists
basing on which cgroup the object is accounted to. This way to make FS
shrinkers (icache, dcache) memcg-aware we only need to make them use
memcg-aware list_lru, and this is what this patch set does.
As before, this patch set only enables per-memcg kmem reclaim when the
pressure goes from memory.limit, not from memory.kmem.limit. Handling
memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and
it is still unclear whether we will have this knob in the unified
hierarchy.
This patch (of 9):
NUMA aware slab shrinkers use the list_lru structure to distribute
objects coming from different NUMA nodes to different lists. Whenever
such a shrinker needs to count or scan objects from a particular node,
it issues commands like this:
count = list_lru_count_node(lru, sc->nid);
freed = list_lru_walk_node(lru, sc->nid, isolate_func,
isolate_arg, &sc->nr_to_scan);
where sc is an instance of the shrink_control structure passed to it
from vmscan.
To simplify this, let's add special list_lru functions to be used by
shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which
consolidate the nid and nr_to_scan arguments in the shrink_control
structure.
This will also allow us to avoid patching shrinkers that use list_lru
when we make shrink_slab() per-memcg - all we will have to do is extend
the shrink_control structure to include the target memcg and make
list_lru_shrink_{count,walk} handle this appropriately.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 14:58:47 -08:00
|
|
|
|
2015-02-12 14:59:17 -08:00
|
|
|
|
list_lru: introduce list_lru_shrink_{count,walk}
Kmem accounting of memcg is unusable now, because it lacks slab shrinker
support. That means when we hit the limit we will get ENOMEM w/o any
chance to recover. What we should do then is to call shrink_slab, which
would reclaim old inode/dentry caches from this cgroup. This is what
this patch set is intended to do.
Basically, it does two things. First, it introduces the notion of
per-memcg slab shrinker. A shrinker that wants to reclaim objects per
cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be
passed the memory cgroup to scan from in shrink_control->memcg. For
such shrinkers shrink_slab iterates over the whole cgroup subtree under
the target cgroup and calls the shrinker for each kmem-active memory
cgroup.
Secondly, this patch set makes the list_lru structure per-memcg. It's
done transparently to list_lru users - everything they have to do is to
tell list_lru_init that they want memcg-aware list_lru. Then the
list_lru will automatically distribute objects among per-memcg lists
basing on which cgroup the object is accounted to. This way to make FS
shrinkers (icache, dcache) memcg-aware we only need to make them use
memcg-aware list_lru, and this is what this patch set does.
As before, this patch set only enables per-memcg kmem reclaim when the
pressure goes from memory.limit, not from memory.kmem.limit. Handling
memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and
it is still unclear whether we will have this knob in the unified
hierarchy.
This patch (of 9):
NUMA aware slab shrinkers use the list_lru structure to distribute
objects coming from different NUMA nodes to different lists. Whenever
such a shrinker needs to count or scan objects from a particular node,
it issues commands like this:
count = list_lru_count_node(lru, sc->nid);
freed = list_lru_walk_node(lru, sc->nid, isolate_func,
isolate_arg, &sc->nr_to_scan);
where sc is an instance of the shrink_control structure passed to it
from vmscan.
To simplify this, let's add special list_lru functions to be used by
shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which
consolidate the nid and nr_to_scan arguments in the shrink_control
structure.
This will also allow us to avoid patching shrinkers that use list_lru
when we make shrink_slab() per-memcg - all we will have to do is extend
the shrink_control structure to include the target memcg and make
list_lru_shrink_{count,walk} handle this appropriately.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 14:58:47 -08:00
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
2015-02-12 14:59:17 -08:00
|
|
|
|
2015-02-12 14:58:51 -08:00
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
2014-06-04 16:10:47 -07:00
|
|
|
|
2023-08-18 16:00:49 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-11 11:20:57 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:49 +02:00
|
|
|
|
|
|
|
|
|
2018-05-11 11:20:57 +10:00
|
|
|
|
2014-06-04 16:10:47 -07:00
|
|
|
|
2018-05-11 11:20:57 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
2015-02-12 14:58:51 -08:00
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
list_lru: introduce list_lru_shrink_{count,walk}
Kmem accounting of memcg is unusable now, because it lacks slab shrinker
support. That means when we hit the limit we will get ENOMEM w/o any
chance to recover. What we should do then is to call shrink_slab, which
would reclaim old inode/dentry caches from this cgroup. This is what
this patch set is intended to do.
Basically, it does two things. First, it introduces the notion of
per-memcg slab shrinker. A shrinker that wants to reclaim objects per
cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be
passed the memory cgroup to scan from in shrink_control->memcg. For
such shrinkers shrink_slab iterates over the whole cgroup subtree under
the target cgroup and calls the shrinker for each kmem-active memory
cgroup.
Secondly, this patch set makes the list_lru structure per-memcg. It's
done transparently to list_lru users - everything they have to do is to
tell list_lru_init that they want memcg-aware list_lru. Then the
list_lru will automatically distribute objects among per-memcg lists
basing on which cgroup the object is accounted to. This way to make FS
shrinkers (icache, dcache) memcg-aware we only need to make them use
memcg-aware list_lru, and this is what this patch set does.
As before, this patch set only enables per-memcg kmem reclaim when the
pressure goes from memory.limit, not from memory.kmem.limit. Handling
memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and
it is still unclear whether we will have this knob in the unified
hierarchy.
This patch (of 9):
NUMA aware slab shrinkers use the list_lru structure to distribute
objects coming from different NUMA nodes to different lists. Whenever
such a shrinker needs to count or scan objects from a particular node,
it issues commands like this:
count = list_lru_count_node(lru, sc->nid);
freed = list_lru_walk_node(lru, sc->nid, isolate_func,
isolate_arg, &sc->nr_to_scan);
where sc is an instance of the shrink_control structure passed to it
from vmscan.
To simplify this, let's add special list_lru functions to be used by
shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which
consolidate the nid and nr_to_scan arguments in the shrink_control
structure.
This will also allow us to avoid patching shrinkers that use list_lru
when we make shrink_slab() per-memcg - all we will have to do is extend
the shrink_control structure to include the target memcg and make
list_lru_shrink_{count,walk} handle this appropriately.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 14:58:47 -08:00
|
|
|
|
|
|
|
|
|
2013-08-28 10:17:57 +10:00
|
|
|
|
2018-08-17 15:48:21 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-08-28 10:17:53 +10:00
|
|
|
|
2011-07-08 14:14:44 +10:00
|
|
|
|
2011-07-08 14:14:42 +10:00
|
|
|
|
|
|
|
|
|
2015-07-22 20:21:13 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-04-16 21:14:52 +03:00
|
|
|
|
2024-02-01 21:10:01 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
2015-07-22 20:21:13 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
|
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2006-09-06 00:03:41 -07:00
|
|
|
|
2012-06-25 12:55:37 +01:00
|
|
|
|
2016-05-24 09:29:01 -05:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-24 09:29:01 -05:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2023-12-08 16:10:22 +01:00
|
|
|
|
2009-09-21 17:01:09 -07:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-24 09:29:01 -05:00
|
|
|
|
2017-12-05 09:32:25 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-01-21 15:48:45 -08:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
|
|
|
|
|
2013-09-04 15:04:39 +02:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2015-01-14 10:42:41 +01:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
2016-06-09 15:44:48 -05:00
|
|
|
|
2016-05-18 13:50:06 -05:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
VFS: don't keep disconnected dentries on d_anon
The original purpose of the per-superblock d_anon list was to
keep disconnected dentries in the cache between consecutive
requests to the NFS server. Dentries can be disconnected if
a client holds a file open and repeatedly performs IO on it,
and if the server drops the dentry, whether due to memory
pressure, server restart, or "echo 3 > /proc/sys/vm/drop_caches".
This purpose was thwarted by commit 75a6f82a0d10 ("freeing unlinked
file indefinitely delayed") which caused disconnected dentries
to be freed as soon as their refcount reached zero.
This means that, when a dentry being used by nfsd gets disconnected, a
new one needs to be allocated for every request (unless requests
overlap). As the dentry has no name, no parent, and no children,
there is little of value to cache. As small memory allocations are
typically fast (from per-cpu free lists) this likely has little cost.
This means that the original purpose of s_anon is no longer relevant:
there is no longer any need to keep disconnected dentries on a list so
they appear to be hashed.
However, s_anon now has a new use. When you mount an NFS filesystem,
the dentry stored in s_root is just a placebo. The "real" root dentry
is allocated using d_obtain_root() and so it kept on the s_anon list.
I don't know the reason for this, but suspect it related to NFSv4
where a mount of "server:/some/path" require NFS to look up the root
filehandle on the server, then walk down "/some" and "/path" to get
the filehandle to mount.
Whatever the reason, NFS depends on the s_anon list and on
shrink_dcache_for_umount() pruning all dentries on this list. So we
cannot simply remove s_anon.
We could just leave the code unchanged, but apart from that being
potentially confusing, the (unfair) bit-spin-lock which protects
s_anon can become a bottle neck when lots of disconnected dentries are
being created.
So this patch renames s_anon to s_roots, and stops storing
disconnected dentries on the list. Only dentries obtained with
d_obtain_root() are now stored on this list. There are many fewer of
these (only NFS and NILFS2 use the call, and only during filesystem
mount) so contention on the bit-lock will not be a problem.
Possibly an alternate solution should be found for NFS and NILFS2, but
that would require understanding their needs first.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-21 09:45:40 +11:00
|
|
|
|
2015-03-04 13:40:00 -05:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
2015-03-04 12:37:22 -05:00
|
|
|
|
2016-07-26 15:21:50 -07:00
|
|
|
|
|
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-06-08 14:39:48 +02:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-01-21 18:04:23 -08:00
|
|
|
|
|
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-04-04 19:53:07 +09:00
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-08-17 15:47:45 -07:00
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
2018-08-17 15:47:45 -07:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2013-08-28 10:18:18 +10:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
2013-10-01 15:09:58 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-22 21:13:53 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
preparations to taking MNT_WRITE_HOLD out of ->mnt_flags
We have an unpleasant wart in accessibility rules for struct mount. There
are per-superblock lists of mounts, used by sb_prepare_remount_readonly()
to check if any of those is currently claimed for write access and to
block further attempts to get write access on those until we are done.
As soon as it is attached to a filesystem, mount becomes reachable
via that list. Only sb_prepare_remount_readonly() traverses it and
it only accesses a few members of struct mount. Unfortunately,
->mnt_flags is one of those and it is modified - MNT_WRITE_HOLD set
and then cleared. It is done under mount_lock, so from the locking
rules POV everything's fine.
However, it has easily overlooked implications - once mount has been
attached to a filesystem, it has to be treated as globally visible.
In particular, initializing ->mnt_flags *must* be done either prior
to that point or under mount_lock. All other members are still
private at that point.
Life gets simpler if we move that bit (and that's *all* that can get
touched by access via this list) out of ->mnt_flags. It's not even
hard to do - currently the list is implemented as list_head one,
anchored in super_block->s_mounts and linked via mount->mnt_instance.
As the first step, switch it to hlist-like open-coded structure -
address of the first mount in the set is stored in ->s_mounts
and ->mnt_instance replaced with ->mnt_next_for_sb and ->mnt_pprev_for_sb -
the former either NULL or pointing to the next mount in set, the
latter - address of either ->s_mounts or ->mnt_next_for_sb in the
previous element of the set.
In the next commit we'll steal the LSB of ->mnt_pprev_for_sb as
replacement for MNT_WRITE_HOLD.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-08-27 12:33:11 -04:00
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-16 15:21:18 +01:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-28 13:26:24 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2009-05-06 01:07:50 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-02 22:31:06 +09:00
|
|
|
|
2010-03-22 15:22:31 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-05-06 01:07:50 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-22 08:53:19 -04:00
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
2014-06-04 16:10:46 -07:00
|
|
|
|
2013-08-28 10:18:18 +10:00
|
|
|
|
2023-08-28 13:26:24 +02:00
|
|
|
|
|
|
|
|
|
2015-02-12 14:59:07 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-05-06 01:07:50 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2009-05-06 01:07:50 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-22 15:22:31 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-03-05 16:06:39 +08:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2010-03-22 15:22:31 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2023-10-24 15:01:14 +02:00
|
|
|
|
2023-08-18 16:00:51 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:14 +02:00
|
|
|
|
2023-08-18 16:00:51 +02:00
|
|
|
|
2023-10-24 15:01:14 +02:00
|
|
|
|
2023-08-18 16:00:51 +02:00
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:14 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:51 +02:00
|
|
|
|
2023-11-27 12:51:30 +01:00
|
|
|
|
2023-08-28 13:26:23 +02:00
|
|
|
|
2023-08-18 16:00:51 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-08 14:14:41 +10:00
|
|
|
|
2023-08-18 16:00:49 +02:00
|
|
|
|
2012-06-09 11:10:55 +08:00
|
|
|
|
2011-07-08 14:14:41 +10:00
|
|
|
|
2015-02-19 20:19:35 +03:00
|
|
|
|
2011-07-08 14:14:41 +10:00
|
|
|
|
2015-02-19 20:19:35 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-08 14:14:41 +10:00
|
|
|
|
2023-08-18 16:00:49 +02:00
|
|
|
|
2011-07-08 14:14:41 +10:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
2011-07-08 14:14:41 +10:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2011-07-08 14:14:41 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-07-27 16:44:24 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2022-07-27 16:44:24 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2022-07-27 16:44:24 +10:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-10-11 01:22:19 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2007-02-12 00:55:41 -08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2006-10-11 01:22:19 -07:00
|
|
|
|
|
|
|
|
|
2009-04-27 16:43:53 +02:00
|
|
|
|
2017-07-17 08:45:35 +01:00
|
|
|
|
2009-01-06 07:20:54 -08:00
|
|
|
|
2024-07-26 11:05:25 +08:00
|
|
|
|
2010-10-25 20:49:35 -04:00
|
|
|
|
2023-03-13 15:12:29 -07:00
|
|
|
|
2010-10-25 20:49:35 -04:00
|
|
|
|
2023-03-13 15:12:29 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-12-06 10:55:59 -06:00
|
|
|
|
2021-04-22 17:41:16 +02:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2013-09-04 15:04:39 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-12-27 11:14:29 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-12-30 15:40:43 +05:30
|
|
|
|
2023-01-16 20:14:25 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:51 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2017-04-12 12:24:47 +02:00
|
|
|
|
2021-11-05 13:36:58 -07:00
|
|
|
|
|
|
|
|
|
2017-04-12 12:24:28 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-05-12 17:31:45 -04:00
|
|
|
|
2019-05-12 15:42:48 -04:00
|
|
|
|
2019-05-12 17:31:45 -04:00
|
|
|
|
2019-05-12 15:42:48 -04:00
|
|
|
|
|
|
|
|
|
2019-07-27 08:29:57 -04:00
|
|
|
|
2019-05-12 15:42:48 -04:00
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: add FSCONFIG_CMD_CREATE_EXCL
Summary
=======
This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to
implement something like mount -t ext4 --exclusive /dev/sda /B which
fails if a superblock for the requested filesystem does already exist:
Before this patch
-----------------
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /A
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /B
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL
--------------------------------------------------------------------------
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
Details
=======
As mentioned on the list (cf. [1]-[3]) mount requests like
mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new
superblock has been created and mounted or an existing superblock has
been reused and a bind-mount has been created.
This becomes clear in the following example where two processes create
the same mount for the same block device:
P1 P2
fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000");
// wins and creates superblock
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
// finds compatible superblock of P1
// spins until P1 sets SB_BORN and grabs a reference
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs);
move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B")
Not just does P2 get a bind-mount but the mount options that P2
requestes are silently ignored. The VFS itself doesn't, can't and
shouldn't enforce filesystem specific mount option compatibility. It
only enforces incompatibility for read-only <-> read-write transitions:
mount -t ext4 /dev/sda /A
mount -t ext4 -o ro /dev/sda /B
The read-only request will fail with EBUSY as the VFS can't just
silently transition a superblock from read-write to read-only or vica
versa without risking security issues.
To userspace this silent superblock reuse can become a security issue in
because there is currently no straightforward way for userspace to know
that they did indeed manage to create a new superblock and didn't just
reuse an existing one.
This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that
returns EBUSY if an existing superblock would be reused. Userspace that
needs to be sure that it did create a new superblock with the requested
mount options can request superblock creation using this command. If the
command succeeds they can be sure that they did create a new superblock
with the requested mount options.
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
each high-level superblock creation helper:
(1) get_tree_nodev()
Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and
FSCONFIG_CMD_CREATE_EXCL are equivalent.
The binderfs or overlayfs filesystems are examples.
(4) get_tree_keyed()
Finds an existing superblock based on sb->s_fs_info. Hence,
FSCONFIG_CMD_CREATE would reuse an existing superblock whereas
FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The mqueue or nfsd filesystems are examples.
(2) get_tree_bdev()
This effectively works like get_tree_keyed().
The ext4 or xfs filesystems are examples.
(3) get_tree_single()
Only one superblock of this filesystem type can ever exist.
Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock
whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The securityfs or configfs filesystems are examples.
Note that some single-instance filesystems never destroy the
superblock once it has been created during the first mount. For
example, if securityfs has been mounted at least onces then the
created superblock will never be destroyed again as long as there is
still an LSM making use it. Consequently, even if securityfs is
unmounted and the superblock seemingly destroyed it really isn't
which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting
reusing an existing superblock.
This is acceptable thugh since special purpose filesystems such as
this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway
and if they do it's probably to make sure that mount options aren't
ignored.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
filesystems that make use of the low-level sget_fc() helper directly.
They're all effectively variants on get_tree_keyed(), get_tree_bdev(),
or get_tree_nodev():
(5) mtd_get_sb()
Similar logic to get_tree_keyed().
(6) afs_get_tree()
Similar logic to get_tree_keyed().
(7) ceph_get_tree()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev().
(8) fuse_get_tree_submount()
Similar logic to get_tree_nodev().
(9) fuse_get_tree()
Forces reuse of existing FUSE superblock.
Forces reuse of existing superblock if passed in file refers to an
existing FUSE connection.
If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd
referring to an existing FUSE connections this would cause the
superblock reusal to fail. If reusing is the intent then
FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(10) fuse_get_tree()
-> get_tree_nodev()
Same logic as in get_tree_nodev().
(11) fuse_get_tree()
-> get_tree_bdev()
Same logic as in get_tree_bdev().
(12) virtio_fs_get_tree()
Same logic as get_tree_keyed().
(13) gfs2_meta_get_tree()
Forces reuse of existing gfs2 superblock.
Mounting gfs2meta enforces that a gf2s superblock must already
exist. If not, it will error out. Consequently, mounting gfs2meta
with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the
intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(14) kernfs_get_tree()
Similar logic to get_tree_keyed().
(15) nfs_get_tree_common()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via NFS_MOUNT_UNSHARED. This effectively turns it into
get_tree_nodev().
Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 13:57:06 +02:00
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
fs: add FSCONFIG_CMD_CREATE_EXCL
Summary
=======
This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to
implement something like mount -t ext4 --exclusive /dev/sda /B which
fails if a superblock for the requested filesystem does already exist:
Before this patch
-----------------
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /A
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /B
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL
--------------------------------------------------------------------------
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
Details
=======
As mentioned on the list (cf. [1]-[3]) mount requests like
mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new
superblock has been created and mounted or an existing superblock has
been reused and a bind-mount has been created.
This becomes clear in the following example where two processes create
the same mount for the same block device:
P1 P2
fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000");
// wins and creates superblock
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
// finds compatible superblock of P1
// spins until P1 sets SB_BORN and grabs a reference
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs);
move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B")
Not just does P2 get a bind-mount but the mount options that P2
requestes are silently ignored. The VFS itself doesn't, can't and
shouldn't enforce filesystem specific mount option compatibility. It
only enforces incompatibility for read-only <-> read-write transitions:
mount -t ext4 /dev/sda /A
mount -t ext4 -o ro /dev/sda /B
The read-only request will fail with EBUSY as the VFS can't just
silently transition a superblock from read-write to read-only or vica
versa without risking security issues.
To userspace this silent superblock reuse can become a security issue in
because there is currently no straightforward way for userspace to know
that they did indeed manage to create a new superblock and didn't just
reuse an existing one.
This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that
returns EBUSY if an existing superblock would be reused. Userspace that
needs to be sure that it did create a new superblock with the requested
mount options can request superblock creation using this command. If the
command succeeds they can be sure that they did create a new superblock
with the requested mount options.
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
each high-level superblock creation helper:
(1) get_tree_nodev()
Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and
FSCONFIG_CMD_CREATE_EXCL are equivalent.
The binderfs or overlayfs filesystems are examples.
(4) get_tree_keyed()
Finds an existing superblock based on sb->s_fs_info. Hence,
FSCONFIG_CMD_CREATE would reuse an existing superblock whereas
FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The mqueue or nfsd filesystems are examples.
(2) get_tree_bdev()
This effectively works like get_tree_keyed().
The ext4 or xfs filesystems are examples.
(3) get_tree_single()
Only one superblock of this filesystem type can ever exist.
Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock
whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The securityfs or configfs filesystems are examples.
Note that some single-instance filesystems never destroy the
superblock once it has been created during the first mount. For
example, if securityfs has been mounted at least onces then the
created superblock will never be destroyed again as long as there is
still an LSM making use it. Consequently, even if securityfs is
unmounted and the superblock seemingly destroyed it really isn't
which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting
reusing an existing superblock.
This is acceptable thugh since special purpose filesystems such as
this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway
and if they do it's probably to make sure that mount options aren't
ignored.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
filesystems that make use of the low-level sget_fc() helper directly.
They're all effectively variants on get_tree_keyed(), get_tree_bdev(),
or get_tree_nodev():
(5) mtd_get_sb()
Similar logic to get_tree_keyed().
(6) afs_get_tree()
Similar logic to get_tree_keyed().
(7) ceph_get_tree()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev().
(8) fuse_get_tree_submount()
Similar logic to get_tree_nodev().
(9) fuse_get_tree()
Forces reuse of existing FUSE superblock.
Forces reuse of existing superblock if passed in file refers to an
existing FUSE connection.
If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd
referring to an existing FUSE connections this would cause the
superblock reusal to fail. If reusing is the intent then
FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(10) fuse_get_tree()
-> get_tree_nodev()
Same logic as in get_tree_nodev().
(11) fuse_get_tree()
-> get_tree_bdev()
Same logic as in get_tree_bdev().
(12) virtio_fs_get_tree()
Same logic as get_tree_keyed().
(13) gfs2_meta_get_tree()
Forces reuse of existing gfs2 superblock.
Mounting gfs2meta enforces that a gf2s superblock must already
exist. If not, it will error out. Consequently, mounting gfs2meta
with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the
intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(14) kernfs_get_tree()
Similar logic to get_tree_keyed().
(15) nfs_get_tree_common()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via NFS_MOUNT_UNSHARED. This effectively turns it into
get_tree_nodev().
Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 13:57:06 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
fs: add FSCONFIG_CMD_CREATE_EXCL
Summary
=======
This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to
implement something like mount -t ext4 --exclusive /dev/sda /B which
fails if a superblock for the requested filesystem does already exist:
Before this patch
-----------------
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /A
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /B
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL
--------------------------------------------------------------------------
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
Details
=======
As mentioned on the list (cf. [1]-[3]) mount requests like
mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new
superblock has been created and mounted or an existing superblock has
been reused and a bind-mount has been created.
This becomes clear in the following example where two processes create
the same mount for the same block device:
P1 P2
fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000");
// wins and creates superblock
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
// finds compatible superblock of P1
// spins until P1 sets SB_BORN and grabs a reference
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs);
move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B")
Not just does P2 get a bind-mount but the mount options that P2
requestes are silently ignored. The VFS itself doesn't, can't and
shouldn't enforce filesystem specific mount option compatibility. It
only enforces incompatibility for read-only <-> read-write transitions:
mount -t ext4 /dev/sda /A
mount -t ext4 -o ro /dev/sda /B
The read-only request will fail with EBUSY as the VFS can't just
silently transition a superblock from read-write to read-only or vica
versa without risking security issues.
To userspace this silent superblock reuse can become a security issue in
because there is currently no straightforward way for userspace to know
that they did indeed manage to create a new superblock and didn't just
reuse an existing one.
This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that
returns EBUSY if an existing superblock would be reused. Userspace that
needs to be sure that it did create a new superblock with the requested
mount options can request superblock creation using this command. If the
command succeeds they can be sure that they did create a new superblock
with the requested mount options.
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
each high-level superblock creation helper:
(1) get_tree_nodev()
Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and
FSCONFIG_CMD_CREATE_EXCL are equivalent.
The binderfs or overlayfs filesystems are examples.
(4) get_tree_keyed()
Finds an existing superblock based on sb->s_fs_info. Hence,
FSCONFIG_CMD_CREATE would reuse an existing superblock whereas
FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The mqueue or nfsd filesystems are examples.
(2) get_tree_bdev()
This effectively works like get_tree_keyed().
The ext4 or xfs filesystems are examples.
(3) get_tree_single()
Only one superblock of this filesystem type can ever exist.
Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock
whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The securityfs or configfs filesystems are examples.
Note that some single-instance filesystems never destroy the
superblock once it has been created during the first mount. For
example, if securityfs has been mounted at least onces then the
created superblock will never be destroyed again as long as there is
still an LSM making use it. Consequently, even if securityfs is
unmounted and the superblock seemingly destroyed it really isn't
which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting
reusing an existing superblock.
This is acceptable thugh since special purpose filesystems such as
this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway
and if they do it's probably to make sure that mount options aren't
ignored.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
filesystems that make use of the low-level sget_fc() helper directly.
They're all effectively variants on get_tree_keyed(), get_tree_bdev(),
or get_tree_nodev():
(5) mtd_get_sb()
Similar logic to get_tree_keyed().
(6) afs_get_tree()
Similar logic to get_tree_keyed().
(7) ceph_get_tree()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev().
(8) fuse_get_tree_submount()
Similar logic to get_tree_nodev().
(9) fuse_get_tree()
Forces reuse of existing FUSE superblock.
Forces reuse of existing superblock if passed in file refers to an
existing FUSE connection.
If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd
referring to an existing FUSE connections this would cause the
superblock reusal to fail. If reusing is the intent then
FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(10) fuse_get_tree()
-> get_tree_nodev()
Same logic as in get_tree_nodev().
(11) fuse_get_tree()
-> get_tree_bdev()
Same logic as in get_tree_bdev().
(12) virtio_fs_get_tree()
Same logic as get_tree_keyed().
(13) gfs2_meta_get_tree()
Forces reuse of existing gfs2 superblock.
Mounting gfs2meta enforces that a gf2s superblock must already
exist. If not, it will error out. Consequently, mounting gfs2meta
with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the
intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(14) kernfs_get_tree()
Similar logic to get_tree_keyed().
(15) nfs_get_tree_common()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via NFS_MOUNT_UNSHARED. This effectively turns it into
get_tree_nodev().
Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 13:57:06 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-24 09:53:59 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-25 16:38:23 +00:00
|
|
|
|
2023-05-10 22:11:19 +00:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: add FSCONFIG_CMD_CREATE_EXCL
Summary
=======
This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to
implement something like mount -t ext4 --exclusive /dev/sda /B which
fails if a superblock for the requested filesystem does already exist:
Before this patch
-----------------
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /A
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /B
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL
--------------------------------------------------------------------------
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
Details
=======
As mentioned on the list (cf. [1]-[3]) mount requests like
mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new
superblock has been created and mounted or an existing superblock has
been reused and a bind-mount has been created.
This becomes clear in the following example where two processes create
the same mount for the same block device:
P1 P2
fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000");
// wins and creates superblock
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
// finds compatible superblock of P1
// spins until P1 sets SB_BORN and grabs a reference
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs);
move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B")
Not just does P2 get a bind-mount but the mount options that P2
requestes are silently ignored. The VFS itself doesn't, can't and
shouldn't enforce filesystem specific mount option compatibility. It
only enforces incompatibility for read-only <-> read-write transitions:
mount -t ext4 /dev/sda /A
mount -t ext4 -o ro /dev/sda /B
The read-only request will fail with EBUSY as the VFS can't just
silently transition a superblock from read-write to read-only or vica
versa without risking security issues.
To userspace this silent superblock reuse can become a security issue in
because there is currently no straightforward way for userspace to know
that they did indeed manage to create a new superblock and didn't just
reuse an existing one.
This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that
returns EBUSY if an existing superblock would be reused. Userspace that
needs to be sure that it did create a new superblock with the requested
mount options can request superblock creation using this command. If the
command succeeds they can be sure that they did create a new superblock
with the requested mount options.
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
each high-level superblock creation helper:
(1) get_tree_nodev()
Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and
FSCONFIG_CMD_CREATE_EXCL are equivalent.
The binderfs or overlayfs filesystems are examples.
(4) get_tree_keyed()
Finds an existing superblock based on sb->s_fs_info. Hence,
FSCONFIG_CMD_CREATE would reuse an existing superblock whereas
FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The mqueue or nfsd filesystems are examples.
(2) get_tree_bdev()
This effectively works like get_tree_keyed().
The ext4 or xfs filesystems are examples.
(3) get_tree_single()
Only one superblock of this filesystem type can ever exist.
Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock
whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The securityfs or configfs filesystems are examples.
Note that some single-instance filesystems never destroy the
superblock once it has been created during the first mount. For
example, if securityfs has been mounted at least onces then the
created superblock will never be destroyed again as long as there is
still an LSM making use it. Consequently, even if securityfs is
unmounted and the superblock seemingly destroyed it really isn't
which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting
reusing an existing superblock.
This is acceptable thugh since special purpose filesystems such as
this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway
and if they do it's probably to make sure that mount options aren't
ignored.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
filesystems that make use of the low-level sget_fc() helper directly.
They're all effectively variants on get_tree_keyed(), get_tree_bdev(),
or get_tree_nodev():
(5) mtd_get_sb()
Similar logic to get_tree_keyed().
(6) afs_get_tree()
Similar logic to get_tree_keyed().
(7) ceph_get_tree()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev().
(8) fuse_get_tree_submount()
Similar logic to get_tree_nodev().
(9) fuse_get_tree()
Forces reuse of existing FUSE superblock.
Forces reuse of existing superblock if passed in file refers to an
existing FUSE connection.
If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd
referring to an existing FUSE connections this would cause the
superblock reusal to fail. If reusing is the intent then
FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(10) fuse_get_tree()
-> get_tree_nodev()
Same logic as in get_tree_nodev().
(11) fuse_get_tree()
-> get_tree_bdev()
Same logic as in get_tree_bdev().
(12) virtio_fs_get_tree()
Same logic as get_tree_keyed().
(13) gfs2_meta_get_tree()
Forces reuse of existing gfs2 superblock.
Mounting gfs2meta enforces that a gf2s superblock must already
exist. If not, it will error out. Consequently, mounting gfs2meta
with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the
intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(14) kernfs_get_tree()
Similar logic to get_tree_keyed().
(15) nfs_get_tree_common()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via NFS_MOUNT_UNSHARED. This effectively turns it into
get_tree_nodev().
Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 13:57:06 +02:00
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
fs: add FSCONFIG_CMD_CREATE_EXCL
Summary
=======
This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to
implement something like mount -t ext4 --exclusive /dev/sda /B which
fails if a superblock for the requested filesystem does already exist:
Before this patch
-----------------
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /A
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /B
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL
--------------------------------------------------------------------------
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
Details
=======
As mentioned on the list (cf. [1]-[3]) mount requests like
mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new
superblock has been created and mounted or an existing superblock has
been reused and a bind-mount has been created.
This becomes clear in the following example where two processes create
the same mount for the same block device:
P1 P2
fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000");
// wins and creates superblock
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
// finds compatible superblock of P1
// spins until P1 sets SB_BORN and grabs a reference
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs);
move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B")
Not just does P2 get a bind-mount but the mount options that P2
requestes are silently ignored. The VFS itself doesn't, can't and
shouldn't enforce filesystem specific mount option compatibility. It
only enforces incompatibility for read-only <-> read-write transitions:
mount -t ext4 /dev/sda /A
mount -t ext4 -o ro /dev/sda /B
The read-only request will fail with EBUSY as the VFS can't just
silently transition a superblock from read-write to read-only or vica
versa without risking security issues.
To userspace this silent superblock reuse can become a security issue in
because there is currently no straightforward way for userspace to know
that they did indeed manage to create a new superblock and didn't just
reuse an existing one.
This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that
returns EBUSY if an existing superblock would be reused. Userspace that
needs to be sure that it did create a new superblock with the requested
mount options can request superblock creation using this command. If the
command succeeds they can be sure that they did create a new superblock
with the requested mount options.
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
each high-level superblock creation helper:
(1) get_tree_nodev()
Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and
FSCONFIG_CMD_CREATE_EXCL are equivalent.
The binderfs or overlayfs filesystems are examples.
(4) get_tree_keyed()
Finds an existing superblock based on sb->s_fs_info. Hence,
FSCONFIG_CMD_CREATE would reuse an existing superblock whereas
FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The mqueue or nfsd filesystems are examples.
(2) get_tree_bdev()
This effectively works like get_tree_keyed().
The ext4 or xfs filesystems are examples.
(3) get_tree_single()
Only one superblock of this filesystem type can ever exist.
Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock
whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The securityfs or configfs filesystems are examples.
Note that some single-instance filesystems never destroy the
superblock once it has been created during the first mount. For
example, if securityfs has been mounted at least onces then the
created superblock will never be destroyed again as long as there is
still an LSM making use it. Consequently, even if securityfs is
unmounted and the superblock seemingly destroyed it really isn't
which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting
reusing an existing superblock.
This is acceptable thugh since special purpose filesystems such as
this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway
and if they do it's probably to make sure that mount options aren't
ignored.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
filesystems that make use of the low-level sget_fc() helper directly.
They're all effectively variants on get_tree_keyed(), get_tree_bdev(),
or get_tree_nodev():
(5) mtd_get_sb()
Similar logic to get_tree_keyed().
(6) afs_get_tree()
Similar logic to get_tree_keyed().
(7) ceph_get_tree()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev().
(8) fuse_get_tree_submount()
Similar logic to get_tree_nodev().
(9) fuse_get_tree()
Forces reuse of existing FUSE superblock.
Forces reuse of existing superblock if passed in file refers to an
existing FUSE connection.
If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd
referring to an existing FUSE connections this would cause the
superblock reusal to fail. If reusing is the intent then
FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(10) fuse_get_tree()
-> get_tree_nodev()
Same logic as in get_tree_nodev().
(11) fuse_get_tree()
-> get_tree_bdev()
Same logic as in get_tree_bdev().
(12) virtio_fs_get_tree()
Same logic as get_tree_keyed().
(13) gfs2_meta_get_tree()
Forces reuse of existing gfs2 superblock.
Mounting gfs2meta enforces that a gf2s superblock must already
exist. If not, it will error out. Consequently, mounting gfs2meta
with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the
intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(14) kernfs_get_tree()
Similar logic to get_tree_keyed().
(15) nfs_get_tree_common()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via NFS_MOUNT_UNSHARED. This effectively turns it into
get_tree_nodev().
Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 13:57:06 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:14 +02:00
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2019-03-25 16:38:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2019-03-25 16:38:28 +00:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2019-03-25 16:38:28 +00:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2019-03-25 16:38:28 +00:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2007-10-18 23:39:57 -07:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2007-10-18 23:39:57 -07:00
|
|
|
|
hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
|
|
|
|
2007-10-18 23:39:57 -07:00
|
|
|
|
|
|
|
|
|
2016-05-24 09:29:01 -05:00
|
|
|
|
|
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
2016-05-24 09:29:01 -05:00
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:14 +02:00
|
|
|
|
2007-10-18 23:39:57 -07:00
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
2007-10-18 23:39:57 -07:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-05-04 21:04:08 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-07-04 17:25:09 +01:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-10-11 13:48:55 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-10 22:11:19 +00:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2011-12-12 22:53:00 -05:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-23 12:53:00 +01:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2016-11-23 12:53:00 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:18 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-10-03 18:17:40 +02:00
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:18 +01:00
|
|
|
|
2017-10-03 18:17:40 +02:00
|
|
|
|
2025-03-29 09:42:18 +01:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2025-03-29 09:42:18 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-27 12:51:30 +01:00
|
|
|
|
2017-10-03 18:17:40 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:18 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:14 +01:00
|
|
|
|
2025-03-29 09:42:17 +01:00
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
2010-03-23 06:06:58 -04:00
|
|
|
|
|
|
|
|
|
2010-07-25 02:31:46 +04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 06:06:58 -04:00
|
|
|
|
2010-07-25 02:31:46 +04:00
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:18 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 06:06:58 -04:00
|
|
|
|
|
|
|
|
|
2011-06-03 20:16:57 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2025-03-29 09:42:16 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-06-03 20:16:57 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
2025-06-11 09:40:44 -07:00
|
|
|
|
2025-03-29 09:42:14 +01:00
|
|
|
|
2025-06-11 09:40:44 -07:00
|
|
|
|
|
|
|
|
|
2011-06-03 20:16:57 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-23 13:38:40 +01:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2005-06-23 00:09:54 -07:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2005-06-23 00:09:54 -07:00
|
|
|
|
2025-03-29 09:42:15 +01:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2025-03-29 09:42:15 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
2023-06-15 13:38:48 +02:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
2009-08-03 23:28:35 +02:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2009-08-03 23:28:35 +02:00
|
|
|
|
|
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:45:40 +02:00
|
|
|
|
2021-01-09 11:42:50 +01:00
|
|
|
|
|
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:45:40 +02:00
|
|
|
|
2023-06-15 13:38:48 +02:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
|
|
|
|
|
2009-12-21 16:28:53 -08:00
|
|
|
|
2014-08-07 07:32:06 -04:00
|
|
|
|
2015-01-11 10:57:27 -05:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2015-01-11 10:57:27 -05:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
2014-08-07 07:32:06 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
2014-08-07 07:32:06 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-12-21 16:28:53 -08:00
|
|
|
|
2011-11-21 12:11:31 +01:00
|
|
|
|
2023-06-20 13:28:32 +02:00
|
|
|
|
2011-11-21 12:11:31 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-15 13:38:48 +02:00
|
|
|
|
|
|
|
|
|
2023-06-20 13:28:32 +02:00
|
|
|
|
|
|
|
|
|
2023-06-15 13:38:48 +02:00
|
|
|
|
2023-06-20 13:28:32 +02:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2018-12-23 18:55:56 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-20 13:28:32 +02:00
|
|
|
|
2010-05-19 07:16:40 -04:00
|
|
|
|
2009-12-21 16:28:53 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2011-11-21 12:11:31 +01:00
|
|
|
|
|
|
|
|
|
2023-06-20 13:28:32 +02:00
|
|
|
|
2011-11-21 12:11:31 +01:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:17 +01:00
|
|
|
|
2017-10-03 18:17:40 +02:00
|
|
|
|
2025-03-29 09:42:17 +01:00
|
|
|
|
2018-11-04 09:28:36 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-10-03 18:17:40 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-03-17 09:38:40 +01:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2025-03-29 09:42:18 +01:00
|
|
|
|
|
|
|
|
|
2009-03-17 09:38:40 +01:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-03-17 09:38:40 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:17 +01:00
|
|
|
|
2017-10-03 18:17:41 +02:00
|
|
|
|
2025-03-29 09:42:17 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2025-03-29 09:42:17 +01:00
|
|
|
|
2017-10-03 18:17:41 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:18 +01:00
|
|
|
|
2017-10-03 18:17:41 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-11-05 14:39:45 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:27:29 +01:00
|
|
|
|
2025-11-05 14:39:45 +01:00
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-11-05 14:39:45 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2025-11-05 14:39:45 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2008-08-28 06:26:23 +04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-06-11 12:03:31 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-07 15:44:25 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-06-11 12:03:31 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-06-11 12:03:31 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2011-07-07 15:44:25 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-06-11 12:03:31 -04:00
|
|
|
|
2011-07-07 15:44:25 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-01-14 10:42:41 +01:00
|
|
|
|
2011-07-07 15:44:25 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-07 15:44:25 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2023-08-28 13:26:24 +02:00
|
|
|
|
2011-07-07 15:44:25 -04:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-02 13:57:03 +02:00
|
|
|
|
2022-10-31 13:46:26 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
2019-03-21 09:22:36 +00:00
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-21 09:22:36 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-02 13:57:03 +02:00
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
2019-03-21 09:22:36 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-23 17:25:47 -05:00
|
|
|
|
|
|
|
|
|
2019-06-01 20:48:55 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-02 13:57:03 +02:00
|
|
|
|
2019-06-01 20:48:55 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-05-22 21:23:39 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-02 13:57:03 +02:00
|
|
|
|
2019-05-22 21:23:39 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-03 19:05:48 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-02 13:57:03 +02:00
|
|
|
|
2019-09-03 19:05:48 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-29 17:23:56 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:45:40 +02:00
|
|
|
|
2023-08-02 17:41:26 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-02 17:41:26 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-08-02 17:41:26 +02:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
|
|
|
|
|
2023-10-17 20:48:23 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
|
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-08-02 17:41:26 +02:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
|
|
|
|
|
2023-08-11 12:08:25 +02:00
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
|
|
|
|
|
2025-07-14 14:55:57 +09:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-11 12:08:25 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-07 15:43:19 +01:00
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
|
|
|
|
|
2023-08-02 17:41:26 +02:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
|
|
|
|
|
2023-08-11 12:08:26 +02:00
|
|
|
|
|
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-08-11 12:08:26 +02:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
2023-10-18 17:29:24 +02:00
|
|
|
|
2023-08-11 12:08:26 +02:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
2023-08-11 12:08:26 +02:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2023-08-11 12:08:26 +02:00
|
|
|
|
|
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-06-13 11:38:14 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
2024-06-13 11:38:14 +02:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-02 17:41:27 +02:00
|
|
|
|
2023-08-11 12:08:25 +02:00
|
|
|
|
2023-08-11 12:08:26 +02:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
2023-06-01 11:44:54 +02:00
|
|
|
|
2023-08-02 17:41:27 +02:00
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
2023-08-02 17:41:20 +02:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-02-08 18:47:35 +01:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
2024-02-08 18:47:35 +01:00
|
|
|
|
|
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
2024-02-08 18:47:35 +01:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
2024-02-08 18:47:35 +01:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-26 13:47:22 +01:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
|
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
2023-09-27 15:21:16 +02:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
2024-03-26 13:47:22 +01:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-02-08 18:47:35 +01:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-11 17:44:37 +08:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
2023-08-02 17:41:20 +02:00
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
2024-10-09 11:31:50 +08:00
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
2024-10-09 11:31:50 +08:00
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
2024-10-09 11:31:50 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
2024-10-09 11:31:50 +08:00
|
|
|
|
|
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
2023-08-29 17:23:56 +02:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-09 11:31:50 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-27 14:15:16 +00:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
|
|
|
|
|
2024-03-26 13:47:22 +01:00
|
|
|
|
2023-07-24 10:51:45 -07:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:45:40 +02:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2011-03-17 22:08:28 -04:00
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
2010-02-05 09:30:46 -05:00
|
|
|
|
2018-12-23 18:55:56 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-12-23 18:55:56 -05:00
|
|
|
|
2024-08-21 22:06:44 -04:00
|
|
|
|
|
|
|
|
|
2018-12-23 18:55:56 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
2011-03-17 22:08:28 -04:00
|
|
|
|
2018-05-11 11:20:57 +10:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-11 11:20:57 +10:00
|
|
|
|
2023-08-18 16:00:50 +02:00
|
|
|
|
[PATCH] VFS: Permit filesystem to override root dentry on mount
Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.
The filesystem is then required to manually set the superblock and root dentry
pointers. For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).
The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.
This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing. In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.
The patch also makes the following changes:
(*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
pointer argument and return an integer, so most filesystems have to change
very little.
(*) If one of the convenience function is not used, then get_sb() should
normally call simple_set_mnt() to instantiate the vfsmount. This will
always return 0, and so can be tail-called from get_sb().
(*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
dcache upon superblock destruction rather than shrink_dcache_anon().
This is required because the superblock may now have multiple trees that
aren't actually bound to s_root, but that still need to be cleaned up. The
currently called functions assume that the whole tree is rooted at s_root,
and that anonymous dentries are not the roots of trees which results in
dentries being left unculled.
However, with the way NFS superblock sharing are currently set to be
implemented, these assumptions are violated: the root of the filesystem is
simply a dummy dentry and inode (the real inode for '/' may well be
inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
with child trees.
[*] Anonymous until discovered from another tree.
(*) The documentation has been adjusted, including the additional bit of
changing ext2_* into foo_* in the documentation.
[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:02:57 -07:00
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
2018-12-20 15:04:50 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-05 11:58:35 -05:00
|
|
|
|
|
|
|
|
|
2009-09-18 13:05:53 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-03-29 09:33:31 -04:00
|
|
|
|
2009-09-18 13:05:53 -07:00
|
|
|
|
2011-03-17 22:08:28 -04:00
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
2009-09-18 13:05:53 -07:00
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2018-11-04 03:19:03 -05:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2017-04-12 12:24:28 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-05-04 14:48:00 +02:00
|
|
|
|
2017-04-12 12:24:28 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-12 12:24:49 +02:00
|
|
|
|
2017-04-12 12:24:28 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-11-05 13:36:58 -07:00
|
|
|
|
2017-04-12 12:24:28 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2016-09-26 18:55:25 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-02 17:19:01 +08:00
|
|
|
|
2016-09-26 18:55:25 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
|
|
|
|
|
2016-09-26 18:55:25 +02:00
|
|
|
|
|
|
|
|
|
2022-01-30 08:53:16 -08:00
|
|
|
|
2016-09-26 18:55:25 +02:00
|
|
|
|
2022-01-30 08:53:16 -08:00
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2010-05-24 22:22:34 -07:00
|
|
|
|
|
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2023-08-22 13:32:50 +02:00
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
2017-07-17 08:45:34 +01:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2023-11-27 12:51:31 +01:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-30 08:53:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
2022-01-30 08:53:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2022-01-30 08:53:16 -08:00
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2016-09-26 18:07:48 +02:00
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
2016-09-26 18:55:25 +02:00
|
|
|
|
2023-08-18 16:00:48 +02:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2023-10-27 08:40:01 +02:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2023-10-27 08:40:01 +02:00
|
|
|
|
|
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-27 08:40:01 +02:00
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
2023-10-27 08:40:01 +02:00
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2017-07-17 08:45:34 +01:00
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
2023-10-27 08:40:01 +02:00
|
|
|
|
2015-08-11 17:05:04 +02:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2016-09-26 18:55:25 +02:00
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
2016-09-26 18:55:25 +02:00
|
|
|
|
2023-10-27 08:40:01 +02:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-06-12 16:20:34 +02:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2023-07-17 09:00:10 -07:00
|
|
|
|
2022-01-30 08:53:16 -08:00
|
|
|
|
2023-10-27 08:40:01 +02:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
|
|
|
|
|
2023-10-27 08:40:01 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2017-10-03 18:17:41 +02:00
|
|
|
|
2021-01-14 09:04:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2021-01-14 09:04:39 +01:00
|
|
|
|
2023-07-17 09:00:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: handle freezing from multiple devices
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-04 15:00:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-01-14 09:04:39 +01:00
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
|
|
|
|
|
2017-10-03 18:17:41 +02:00
|
|
|
|
2023-10-24 15:01:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-03-29 09:42:19 +01:00
|
|
|
|
2017-10-03 18:17:41 +02:00
|
|
|
|
2010-03-23 10:34:56 -04:00
|
|
|
|
2023-01-25 07:58:38 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-09-16 10:29:06 +02:00
|
|
|
|
|
|
|
|
|
2023-01-25 07:58:38 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 15:23:03 +02:00
|
|
|
|
|
|
|
|
|
2023-01-25 07:58:38 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 15:23:03 +02:00
|
|
|
|
|
|
|
|
|
2023-01-25 07:58:38 +01:00
|
|
|
|
2025-08-11 15:23:03 +02:00
|
|
|
|
2023-01-25 07:58:38 +01:00
|
|
|
|
|
|
|
|
|
2023-08-22 20:50:59 +03:00
|
|
|
|
