kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/scripts/Makefile.package

236 lines
8.1 KiB
Raw Permalink Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:07:45 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package scripts/package/Makefile does not use $(obj) or $(src) at all. It actually generates files and directories in the top of $(objtree). I do not see much sense in descending into scripts/package/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:04 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Replace '-' in kernel version with '_' Removing the '-' results in hard to read filenames such as: kernel-2.6.35.2000042g76e4caf-28.x86_64.rpm kernel-2.6.35.2_000042_g76e4caf-28.x86_64.rpm is easier to read. Signed-off-by: Arun Sharma <asharma@fb.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-04 13:48:11 -07:00
kbuild: deb-pkg: split generating packaging and build Move debian/ directory generation out of builddeb to a new script, mkdebian. The package build commands are kept in builddeb, which is now an internal command called from debian/rules. With these changes in place, we can now use dpkg-buildpackage from deb-pkg and bindeb-pkg removing need for handrolled source/changes generation. This patch is based on the criticism of the current state of builddeb discussed on: https://patchwork.kernel.org/patch/9656403/ Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-05 14:22:29 +03:00
rpm-pkg: Do not package the whole source directory The source tree can contain lots of uninteresting data like tag or cscope files, packaging which slows down make rpm needlessly. It can also break the build, if the tree contains an unrelated file named *.spec. The downside of this change is that new subdirectories have to be added to the KBUILD_ALLDIRS variable in the top-level Makefile. The upside is that the behavior is more predictable. Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-12 14:12:50 +02:00
kbuild: hard-code KBUILD_ALLDIRS in scripts/Makefile.package My future plan is to list subdirectories in ./Kbuild. When it occurs, $(vmlinux-alldirs) will not contain all subdirectories. Let's hard-code the directory list until I get around to implementing a more sophisticated way for generating a source tarball. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-25 03:19:09 +09:00
scripts: add rust in scripts/Makefile.package Add rust argument at TAR_CONTENT in scripts/Makefile.package script with alphabetical order. Signed-off-by: Paran Lee <p4ranlee@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-24 07:00:44 +09:00
kbuild: do not put .scmversion into the source tarball .scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE. In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line. Do likwise for (src)rpm-pkg, and remove this feature. For the same reason, you do not need to save LOCALVERSION in the spec file. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-01-22 23:14:21 +09:00
rpm-pkg: Do not package the whole source directory The source tree can contain lots of uninteresting data like tag or cscope files, packaging which slows down make rpm needlessly. It can also break the build, if the tree contains an unrelated file named *.spec. The downside of this change is that new subdirectories have to be added to the KBUILD_ALLDIRS variable in the top-level Makefile. The upside is that the behavior is more predictable. Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-12 14:12:50 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
package/Makefile: move source tar creation to a function Split source tarball creation from rpm-pkg target so it can be used from deb-pkg target as well. As added bonus, we can now pretty print TAR the name of tarball created in quiet mode This patch prepares the groundwork for deb-pkg source package adding bit. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-02 12:57:08 +03:00
kbuild: pkg: make out-of-tree rpm/deb-pkg build immediately fail We do not support out-of-tree building of rpm-pkg / deb-pkg. If O= is given, the build should be terminated, but the "false" command is not effective since it is not the last command in the cmd_src_tar. Then, rpm-pkg / deb-pkg tries to continue building, and fails for a different reason. Set -e option so that the "false" terminates the building immediately. I also put the error messages to stderr, and made it stand out more. For example, "make O=foo rpm-pkg" will fail as follows: /bin/bash ../scripts/package/mkspec >./kernel.spec TAR kernel-4.15.0_rc2+.tar.gz ERROR: Building source tarball is not possible outside the kernel source tree. Don't set KBUILD_OUTPUT, or use the binrpm-pkg or bindeb-pkg target instead. ../scripts/package/Makefile:53: recipe for target 'rpm-pkg' failed Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jim Davis <jim.epost@gmail.com>
2017-12-06 19:32:57 +09:00
kbuild: srcrpm-pkg: create source package without cleaning If you run 'make (src)rpm-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, the .config was contained in the source tarball. With this commit, the source rpm consists of separate linux.tar.gz and .config. Remove stale comments. Now, 'make (src)rpm-pkg' works with O= option. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:26 +09:00
kbuild: pkg: make out-of-tree rpm/deb-pkg build immediately fail We do not support out-of-tree building of rpm-pkg / deb-pkg. If O= is given, the build should be terminated, but the "false" command is not effective since it is not the last command in the cmd_src_tar. Then, rpm-pkg / deb-pkg tries to continue building, and fails for a different reason. Set -e option so that the "false" terminates the building immediately. I also put the error messages to stderr, and made it stand out more. For example, "make O=foo rpm-pkg" will fail as follows: /bin/bash ../scripts/package/mkspec >./kernel.spec TAR kernel-4.15.0_rc2+.tar.gz ERROR: Building source tarball is not possible outside the kernel source tree. Don't set KBUILD_OUTPUT, or use the binrpm-pkg or bindeb-pkg target instead. ../scripts/package/Makefile:53: recipe for target 'rpm-pkg' failed Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jim Davis <jim.epost@gmail.com>
2017-12-06 19:32:57 +09:00
package/Makefile: move source tar creation to a function Split source tarball creation from rpm-pkg target so it can be used from deb-pkg target as well. As added bonus, we can now pretty print TAR the name of tarball created in quiet mode This patch prepares the groundwork for deb-pkg source package adding bit. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-02 12:57:08 +03:00
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp. GZIP, BZIP2, LZOP env variables are reserved by the tools. The original attempt to redefine them internally doesn't work in makefiles/scripts intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in broken builds. There can be other broken build commands because of this, so the universal solution is to use non-reserved env variables for the compression tools. Fixes: 8dfb61dcbace ("kbuild: add variables for compression tools") Signed-off-by: Denis Efremov <efremov@linux.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-08 12:59:44 +03:00
kbuild: do not put .scmversion into the source tarball .scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE. In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line. Do likwise for (src)rpm-pkg, and remove this feature. For the same reason, you do not need to save LOCALVERSION in the spec file. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-01-22 23:14:21 +09:00
package/Makefile: move source tar creation to a function Split source tarball creation from rpm-pkg target so it can be used from deb-pkg target as well. As added bonus, we can now pretty print TAR the name of tarball created in quiet mode This patch prepares the groundwork for deb-pkg source package adding bit. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-02 12:57:08 +03:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: replace PHONY with FORCE .PHONY: does not take patterns so use FORCE to achive same effect. Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-08 18:39:05 +01:00
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:03 +09:00
kbuild: rpm-pkg: build binary packages from source rpm The build rules of rpm-pkg and srcrpm-pkg are almost the same. Remove the code duplication. Change rpm-pkg to build binary packages from the source package generated by srcrpm-pkg. This changes the output directory of the srpm generated by 'make rpm-pkg' because srcrpm-pkg overrides _srcrpmdir. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:25 +09:00
kbuild: rpm-pkg: do not force -jN in submake The spec file always passes %{?_smp_mflags}, but we have two problems here. [1] "make -jN rpm-pkg" emits the following warning message: make[2]: warning: -jN forced in submake: disabling jobserver mode. [2] We can not specify the number of jobs that run in parallel. Whether we give -jN or not from the top Makefile, the spec file always passes ${?_smp_mflags} to the build commands. ${?_smp_mflags} will be useful when we run rpmbuild by hand. When we invoke it from Makefile, -jN is propagated down to submake; it should not be overridden because we want to respect the number of jobs given by the user. Set _smp_mflags to empty string in this case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 10:10:11 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: add ability to make source rpm buildable using koji Changes: - added new target 'srcrpm-pkg' to generate source rpm - added required build tools to spec file - removed locally compiled host tools to force their re-compile Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Íñigo Huguet <ihuguet@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-21 09:48:45 -05:00
kbuild: srcrpm-pkg: create source package without cleaning If you run 'make (src)rpm-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, the .config was contained in the source tarball. With this commit, the source rpm consists of separate linux.tar.gz and .config. Remove stale comments. Now, 'make (src)rpm-pkg' works with O= option. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:26 +09:00
kbuild: add ability to make source rpm buildable using koji Changes: - added new target 'srcrpm-pkg' to generate source rpm - added required build tools to spec file - removed locally compiled host tools to force their re-compile Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Íñigo Huguet <ihuguet@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-21 09:48:45 -05:00
kbuild: srcrpm-pkg: create source package without cleaning If you run 'make (src)rpm-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, the .config was contained in the source tarball. With this commit, the source rpm consists of separate linux.tar.gz and .config. Remove stale comments. Now, 'make (src)rpm-pkg' works with O= option. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:26 +09:00
kbuild: rpm-pkg: move source components to rpmbuild/SOURCES Prepare to add more files to the source RPM. Also, fix the build error when KCONFIG_CONFIG is set: error: Bad file: ./.config: No such file or directory Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:17 +09:00
kbuild: add ability to make source rpm buildable using koji Changes: - added new target 'srcrpm-pkg' to generate source rpm - added required build tools to spec file - removed locally compiled host tools to force their re-compile Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Íñigo Huguet <ihuguet@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-21 09:48:45 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: replace PHONY with FORCE .PHONY: does not take patterns so use FORCE to achive same effect. Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-08 18:39:05 +01:00
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:03 +09:00
kbuild: pkg: use -f $(srctree)/Makefile to recurse to top Makefile '$(MAKE) KBUILD_SRC=' changes the working directory back and forth between objtree and srctree. It is better to recurse to the top-level Makefile directly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-14 12:05:14 +09:00
rpm-pkg: Always regenerate the specfile The *pkg targets are always run, so it makes no sense to cache the generated specfile. This also fixes build errors when the specfile becomes out of date, without the Makefile noticing it: $ make rpm works $ echo yadadada >localversion-test $ make rpm fails, because kernel.spec assumes the old kernel release string Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-13 21:21:15 +02:00
kbuild: rpm-pkg: fix jobserver unavailable warning If "make rpm-pkg" or "make binrpm-pkg" is run with -j[jobs] option, the following warning message is displayed. warning: jobserver unavailable: using -j1. Add '+' to parent make rule. Follow the suggestion. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 10:10:09 +09:00
kbuild: rpm-pkg: pass 'linux' to --target option of rpmbuild Presumably, _target_os is defined even if the --target flag does not specify it, but it is better to make it explicit. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-07-14 14:02:41 +09:00
kbuild: rpm-pkg: keep spec file until make mrproper If build fails during (bin)rpm-pkg, the spec file is not cleaned by anyone until the next successful build of the package. We do not have to immediately delete the spec file in case somebody may want to take a look at it. Instead, make them ignored by git, and cleaned up by make mrproper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 10:10:10 +09:00
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile scripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog. Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:27 +09:00
kbuild: deb-pkg: make .orig tarball a hard link if possible If '..' belongs to the same filesystem, create a hard link instead of a copy. In most cases, you can save disk space. I do not want to use 'mv' because keeping linux.tar.gz is useful to avoid unneeded rebuilding of the tarball. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:28 +09:00
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile scripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog. Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:27 +09:00
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:03 +09:00
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile scripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog. Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:27 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: deb-pkg: switch over to source format 3.0 (quilt) Change the source format from "1.0" to "3.0 (quilt)" because it works more cleanly. All files except .config and debian/ go into the orig tarball. Add a single patch, debian/patches/config, and delete the ugly extend-diff-ignore patterns. The debian tarball will be compressed into *.debian.tar.xz by default. If you like to use a different compression mode, you can pass the command line option, DPKG_FLAGS=-Zgzip, for example. The orig tarball only supports gzip for now. The combination of gzip and xz is somewhat clumsy, but it is not a practical problem. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:29 +09:00
deb-pkg: add source package Make deb-pkg build both source and binary package like make rpm-pkg does. For people who only need binary kernel package, there is now bindeb-pkg target, same target also used to build the .deb files if built from the source package using dpkg-buildpackage. Generated source package will build the same kernel .config than what was available for make deb-pkg. The name of the source package can be set with KDEB_SOURCENAME enviroment variable. The source package is useful for GPL compliance, or for feeding to a automated debian package builder. Cc: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: maximilian attems <maks@stro.at> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-02 12:57:24 +03:00
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:03 +09:00
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile scripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog. Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:27 +09:00
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable DPKG_FLAGS variable lets user to add more flags to dpkg-buildpackage command in deb-pkg and bindeb-pkg. Signed-off-by: Kacper Kołodziej <kacper@kolodziej.it> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-05 13:37:52 +01:00
kbuild: deb-pkg: split generating packaging and build Move debian/ directory generation out of builddeb to a new script, mkdebian. The package build commands are kept in builddeb, which is now an internal command called from debian/rules. With these changes in place, we can now use dpkg-buildpackage from deb-pkg and bindeb-pkg removing need for handrolled source/changes generation. This patch is based on the criticism of the current state of builddeb discussed on: https://patchwork.kernel.org/patch/9656403/ Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-05 14:22:29 +03:00
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:03 +09:00
kbuild: deb-pkg: split generating packaging and build Move debian/ directory generation out of builddeb to a new script, mkdebian. The package build commands are kept in builddeb, which is now an internal command called from debian/rules. With these changes in place, we can now use dpkg-buildpackage from deb-pkg and bindeb-pkg removing need for handrolled source/changes generation. This patch is based on the criticism of the current state of builddeb discussed on: https://patchwork.kernel.org/patch/9656403/ Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-05 14:22:29 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
scripts/package: snap-pkg target Following in footsteps of other targets like 'deb-pkg, 'rpm-pkg' and 'tar-pkg', this patch adds a 'snap-pkg' target for the creation of a Linux kernel snap package using the kbuild infrastructure. A snap, in its general form, is a self contained, sandboxed, universal package and it is intended to work across multiple distributions and/or devices. A snap package is distributed as a single compressed squashfs filesystem. A kernel snap is a snap package carrying the Linux kernel, kernel modules, accessory files (DTBs, System.map, etc) and a manifesto file. The purpose of a kernel snap is to carry the Linux kernel during the creation of a system image, eg. Ubuntu Core, and its subsequent upgrades. For more information on snap packages: https://snapcraft.io/docs/ Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-27 12:07:34 +01:00
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:03 +09:00
scripts/package: snap-pkg target Following in footsteps of other targets like 'deb-pkg, 'rpm-pkg' and 'tar-pkg', this patch adds a 'snap-pkg' target for the creation of a Linux kernel snap package using the kbuild infrastructure. A snap, in its general form, is a self contained, sandboxed, universal package and it is intended to work across multiple distributions and/or devices. A snap package is distributed as a single compressed squashfs filesystem. A kernel snap is a snap package carrying the Linux kernel, kernel modules, accessory files (DTBs, System.map, etc) and a manifesto file. The purpose of a kernel snap is to carry the Linux kernel during the creation of a system image, eg. Ubuntu Core, and its subsequent upgrades. For more information on snap packages: https://snapcraft.io/docs/ Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-27 12:07:34 +01:00
kbuild: tar-pkg: use tar rules in scripts/Makefile.package Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in scripts/Makefile.package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:31 +09:00
[PATCH] kbuild: create tarballs It adds tarball packaging, which I prefer for distribution. Also one of the two blanks after @echo is removed. One seems to be enough :) Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-05-24 11:27:37 +02:00
kbuild: tar-pkg: use tar rules in scripts/Makefile.package Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in scripts/Makefile.package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:31 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: tar-pkg: use tar rules in scripts/Makefile.package Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in scripts/Makefile.package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:31 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: tar-pkg: use tar rules in scripts/Makefile.package Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in scripts/Makefile.package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:31 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
[PATCH] kbuild: create tarballs It adds tarball packaging, which I prefer for distribution. Also one of the two blanks after @echo is removed. One seems to be enough :) Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-05-24 11:27:37 +02:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
perf tools: Make target to generate self contained source tarball Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-31 11:13:21 -03:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
perf tools: Make target to generate self contained source tarball Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-31 11:13:21 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:03 +09:00
perf tools: Make target to generate self contained source tarball Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-31 11:13:21 -03:00
kbuild: add a missing line for help message The help message line for building the source RPM package was missing. Added it. Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-12-27 17:21:57 +08:00
deb-pkg: add source package Make deb-pkg build both source and binary package like make rpm-pkg does. For people who only need binary kernel package, there is now bindeb-pkg target, same target also used to build the .deb files if built from the source package using dpkg-buildpackage. Generated source package will build the same kernel .config than what was available for make deb-pkg. The name of the source package can be set with KDEB_SOURCENAME enviroment variable. The source package is useful for GPL compliance, or for feeding to a automated debian package builder. Cc: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: maximilian attems <maks@stro.at> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-02 12:57:24 +03:00
kbuild: Wrap long "make help" text lines Some "make help" text lines extend beyond 80 characters. Wrap them before an opening parenthesis, or before 80 characters. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-25 13:52:32 +02:00
kbuild: Add make dir-pkg build option Add a 'dir-pkg' target which just creates the same directory structures as in tar-pkg, but doesn't package anything. Useful when the user wants to copy the kernel tree on a machine using ssh, rsync or whatever. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-04 14:11:44 +01:00
perf tools: Make target to generate self contained source tarball Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-31 11:13:21 -03:00
kbuild: Add make tarxz-pkg build option Signed-off-by: Zdenek Kaspar <zkaspar82@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-30 12:18:51 +01:00
kbuild: Add make tarzst-pkg build option Add tarzst-pkg and perf-tarzst-src-pkg targets to build zstd compressed tarballs. Signed-off-by: Paweł Jasiak <pawel@jasiak.dev> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-10-08 13:37:59 +02:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 10:20:30 +09:00
kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package scripts/package/Makefile does not use $(obj) or $(src) at all. It actually generates files and directories in the top of $(objtree). I do not see much sense in descending into scripts/package/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:04 +09:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 10:20:24 +09:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 00:50:18 +09:00
kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package scripts/package/Makefile does not use $(obj) or $(src) at all. It actually generates files and directories in the top of $(objtree). I do not see much sense in descending into scripts/package/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 16:02:04 +09:00