kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/scripts/kconfig/expr.c

1303 lines
30 KiB
Raw Permalink Normal View History

kconfig: convert to SPDX License Identifier All files in lxdialog/ are licensed under GPL-2.0+, and the rest are under GPL-2.0. I added GPL-2.0 tags to test scripts in tests/. Documentation/process/license-rules.rst does not suggest anything about the flex/bison files. Because flex does not accept the C++ comment style at the very top of a file, I used the C style for zconf.l, and so for zconf.y for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-18 21:13:35 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: split some C files out of zconf.y I want to compile each C file independently instead of including all of them from zconf.y. Split out confdata.c, expr.c, symbol.c, and preprocess.c . These are low-hanging fruits. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21 17:33:04 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Remove unnecessary prototypes from headers Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-24 16:37:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Fix malloc handling in conf tools (and get them out of the noise in the audit work) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-11-06 14:32:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Fix malloc handling in conf tools (and get them out of the noise in the audit work) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-11-06 14:32:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Fix malloc handling in conf tools (and get them out of the noise in the audit work) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-11-06 14:32:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Fix malloc handling in conf tools (and get them out of the noise in the audit work) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-11-06 14:32:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Make expr_copy() take a const argument Fixes scripts/kconfig/expr.c: In function ‘expr_get_leftmost_symbol’: scripts/kconfig/expr.c:1026:2: warning: passing argument 1 of ‘expr_copy’ discards qualifiers from pointer target type scripts/kconfig/expr.c:67:14: note: expected ‘struct expr *’ but argument is of type ‘const struct expr *’ Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-20 16:06:44 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Fix malloc handling in conf tools (and get them out of the noise in the audit work) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-11-06 14:32:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: explicitly introduce expression list Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-14 04:50:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: send error messages to stderr These messages should be directed to stderr. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-06 09:34:41 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Fix expr_free() E_NOT leak Only the E_NOT operand and not the E_NOT node itself was freed, due to accidentally returning too early in expr_free(). Outline of leak: switch (e->type) { ... case E_NOT: expr_free(e->left.expr); return; ... } *Never reached, 'e' leaked* free(e); Fix by changing the 'return' to a 'break'. Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix: LEAK SUMMARY: definitely lost: 44,448 bytes in 1,852 blocks ... Summary after the fix: LEAK SUMMARY: definitely lost: 1,608 bytes in 67 blocks ... Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:35:45 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: send error messages to stderr These messages should be directed to stderr. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-06 09:34:41 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: remove SYMBOL_{YES,MOD,NO} The SYMBOL_{YES,MOD,NO} are not really used anymore (they were more used be the cml1 converter), so just remove them. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:40 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
kconfig: distinguish between dependencies and visibility in help text Kconfig makes a distinction between dependencies (defined by "depends on" expressions and enclosing "if" blocks) and visibility (which includes all dependencies, but also includes inline "if" expressions of individual properties as well as, for prompts, "visible if" expressions of enclosing menus). Before commit bcdedcc1afd6 ("menuconfig: print more info for symbol without prompts"), the "Depends on" lines of a symbol's help text indicated the visibility of the prompt property they appeared under. After bcdedcc1afd, there was always only a single "Depends on" line, which indicated the visibility of the first P_SYMBOL property of the symbol. Since P_SYMBOLs never have inline if expressions, this was in effect the same as the dependencies of the menu item that the P_SYMBOL was attached to. Neither of these situations accurately conveyed the dependencies of a symbol--the first because it was actually the visibility, and the second because it only showed the dependencies from a single definition. With this series, we are back to printing separate dependencies for each definition, but we print the actual dependencies (rather than the visibility) in the "Depends on" line. However, it can still be useful to know the visibility of a prompt, so this patch adds a "Visible if" line that shows the visibility only if the visibility is different from the dependencies (which it isn't for most prompts in Linux). Before: Symbol: THUMB2_KERNEL [=n] Type : bool Defined at arch/arm/Kconfig:1417 Prompt: Compile the kernel in Thumb-2 mode Depends on: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n] Location: -> Kernel Features Selects: ARM_UNWIND [=n] After: Symbol: THUMB2_KERNEL [=n] Type : bool Defined at arch/arm/Kconfig:1417 Prompt: Compile the kernel in Thumb-2 mode Depends on: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n] Visible if: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n] && !CPU_THUMBONLY [=n] Location: -> Kernel Features Selects: ARM_UNWIND [=n] Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-12-17 08:15:44 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: don't crash on NULL expressions in expr_eq() NULL expressions are taken to always be true, as implemented by the expr_is_yes() macro and by several other functions in expr.c. As such, they ought to be valid inputs to expr_eq(), which compares two expressions. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-12-09 00:19:17 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: explicitly introduce expression list Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-14 04:50:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
kconfig: Remove unnecessary prototypes from headers Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-24 16:37:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: add static to prototypes Warnings found via gcc -Wmissing-prototypes. Signed-off-by: Trevor Keith <tsrk@tsrk.net> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-18 12:49:23 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: add static to prototypes Warnings found via gcc -Wmissing-prototypes. Signed-off-by: Trevor Keith <tsrk@tsrk.net> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-18 12:49:23 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: explicitly introduce expression list Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-14 04:50:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Document important expression functions Many of these functions are quite the head scratchers if you don't know what they're trying to do. Document them. Also make it clear which functions rewrite expressions in-place and which return new expressions. This prevents memory errors. No functional changes. Only comments added. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-08 19:50:55 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: explicitly introduce expression list Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-14 04:50:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
kconfig: fix relational operators for bool and tristate symbols Since commit 31847b67bec0 ("kconfig: allow use of relations other than (in)equality") it is possible to use relational operators in Kconfig statements. However, those operators give unexpected results when applied to bool/tristate values: (n < y) = y (correct) (m < y) = y (correct) (n < m) = n (wrong) This happens because relational operators process bool and tristate symbols as strings and m sorts before n. It makes little sense to do a lexicographical compare on bool and tristate values though. Documentation/kbuild/kconfig-language.txt states that expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2 respectively for calculations). Let's make it so for relational comparisons with bool/tristate expressions as well and document them. If at least one symbol is an actual string then the lexicographical compare works just as before. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-16 20:06:39 -05:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
kconfig: remove k_invalid from expr_parse_string() return type The only possibility of k_invalid being returned was when expr_parse_sting() parsed S_OTHER type symbol. This actually never happened, and this is even clearer since S_OTHER has gone. Clean up unreachable code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-30 18:15:52 +09:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: rename E_OR & friends to avoid name clash We had macros named the same as a set of enumeration values. It is legal code but very confusing to read - so rename the macros from E_* to EXPR_* Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-07 21:09:55 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: rename E_OR & friends to avoid name clash We had macros named the same as a set of enumeration values. It is legal code but very confusing to read - so rename the macros from E_* to EXPR_* Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-07 21:09:55 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: rename E_OR & friends to avoid name clash We had macros named the same as a set of enumeration values. It is legal code but very confusing to read - so rename the macros from E_* to EXPR_* Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-07 21:09:55 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
kconfig: remove k_invalid from expr_parse_string() return type The only possibility of k_invalid being returned was when expr_parse_sting() parsed S_OTHER type symbol. This actually never happened, and this is even clearer since S_OTHER has gone. Clean up unreachable code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-30 18:15:52 +09:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Remove unnecessary prototypes from headers Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-24 16:37:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: explicitly introduce expression list Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-14 04:50:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: explicitly introduce expression list Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-14 04:50:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: clean-up reverse dependency help implementation This commit splits out the special E_OR handling ('-' instead of '||') into a dedicated helper expr_print_revdev(). Restore the original expr_print() prior to commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable"). This makes sense because: - We need to chop those expressions only when printing the reverse dependency, and only when E_OR is encountered - Otherwise, it should be printed as before, so fall back to expr_print() This also improves the behavior; for a single line, it was previously displayed in the same line as "Selected by", like this: Selected by: A [=n] && B [=n] This will be displayed in a new line, consistently: Selected by: - A [=n] && B [=n] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2018-02-20 17:18:47 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: tristate choices with mixed tristate and boolean values Change kconfig behavior so that mixing bool and tristate config settings in a choice is possible and has the desired effect of offering just the tristate options individually if the choice gets set to M, and a normal boolean selection if the choice gets set to Y. Also fix scripts/kconfig/conf's handling of children of choice values - there may be more than one immediate child, and all of them need to be processed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: "Roman Zippel" <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-24 11:54:23 +00:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
kconfig: Fix copy&paste error Fixes: 31847b67bec0 ("kconfig: allow use of relations other than (in)equality") Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-10-19 16:51:02 +02:00
kconfig: allow use of relations other than (in)equality Over the years I found it desirable to be able to use all sorts of relations, not just (in)equality. And apparently I'm not the only one, as there's at least one example in the tree where the programmer assumed this would work (see DEBUG_UART_8250_WORD in arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the two SMP/NR_CPUS prompts into one: SMP could be promptless, simply depending on NR_CPUS > 1. A (desirable) side effect of this change - resulting from numeric values now necessarily being compared as numbers rather than as strings - is that comparing hex values now works as expected: Other than int ones (which aren't allowed to have leading zeroes), zeroes following the 0x prefix made them compare unequal even if their values were equal. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 13:00:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: tristate choices with mixed tristate and boolean values Change kconfig behavior so that mixing bool and tristate config settings in a choice is possible and has the desired effect of offering just the tristate options individually if the choice gets set to M, and a normal boolean selection if the choice gets set to Y. Also fix scripts/kconfig/conf's handling of children of choice values - there may be more than one immediate child, and all of them need to be processed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: "Roman Zippel" <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-24 11:54:23 +00:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: clean-up reverse dependency help implementation This commit splits out the special E_OR handling ('-' instead of '||') into a dedicated helper expr_print_revdev(). Restore the original expr_print() prior to commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable"). This makes sense because: - We need to chop those expressions only when printing the reverse dependency, and only when E_OR is encountered - Otherwise, it should be printed as before, so fall back to expr_print() This also improves the behavior; for a single line, it was previously displayed in the same line as "Selected by", like this: Selected by: A [=n] && B [=n] This will be displayed in a new line, consistently: Selected by: - A [=n] && B [=n] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2018-02-20 17:18:47 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: explicitly introduce expression list Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-14 04:50:23 +01:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
kconfig: explicitly introduce expression list Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-14 04:50:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Fix warning: ignoring return value of 'fwrite' This fix facilitates fwrite() in both confdata.c and expr.c, either it succeeds in writing, or an error occurs, or the end of file is reached. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-04 16:01:02 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: create links in info window Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
menuconfig: wrap long help lines Help text for certain config options is very extensive (the text includes the names of all other options the option in question depends on). Long lines are not wrapped, making it impossible to see the list without scrolling horizontally. This patch adds some logic which wraps help screen lines at word boundaries to prevent truncating. Tested by running ARCH=powerpc make menuconfig O=/tmp/build which shows that the long lines are now wrapped, and ARCH=powerpc make xconfig O=/tmp/build to demonstrate that it still compiles and operates as expected. Signed-off-by: Vadim Bendebury <vbendeb@google.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-20 00:29:49 -08:00
kconfig: print the range of integer/hex symbol in help text Without this patch, one has to refer to the Kconfig file to find out the range of an integer/hex symbol. │ Symbol: NR_CPUS [=4] │ Type : integer │ Range : [2 8] │ Prompt: Maximum number of CPUs │ Defined at arch/x86/Kconfig:761 │ Depends on: SMP [=y] && !MAXSMP [=n] │ Location: │ -> Processor type and features Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-05-07 13:56:50 +08:00
menuconfig: wrap long help lines Help text for certain config options is very extensive (the text includes the names of all other options the option in question depends on). Long lines are not wrapped, making it impossible to see the list without scrolling horizontally. This patch adds some logic which wraps help screen lines at word boundaries to prevent truncating. Tested by running ARCH=powerpc make menuconfig O=/tmp/build which shows that the long lines are now wrapped, and ARCH=powerpc make xconfig O=/tmp/build to demonstrate that it still compiles and operates as expected. Signed-off-by: Vadim Bendebury <vbendeb@google.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-20 00:29:49 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: make "Selected by:" and "Implied by:" readable Reverse dependency expressions can get rather unwieldy, especially if a symbol is selected by more than a handful of other symbols. I.e. it's possible to have near endless expressions like: A && B && !C || D || F && (G || H) || [...] Chop these expressions into actually readable chunks: - A && B && !C - D - F && (G || H) - [...] I.e. transform the top level OR tokens into newlines and prepend each line with a minus. This makes the "Selected by:" and "Implied by:" blurb much easier to read. This is done only if there is more than one top level OR. "Depends on:" and "Range :" were deliberately left as they are. Based on idea from Paul Bolle. Suggested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-25 10:46:35 +01:00
kconfig: clean-up reverse dependency help implementation This commit splits out the special E_OR handling ('-' instead of '||') into a dedicated helper expr_print_revdev(). Restore the original expr_print() prior to commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable"). This makes sense because: - We need to chop those expressions only when printing the reverse dependency, and only when E_OR is encountered - Otherwise, it should be printed as before, so fall back to expr_print() This also improves the behavior; for a single line, it was previously displayed in the same line as "Selected by", like this: Selected by: A [=n] && B [=n] This will be displayed in a new line, consistently: Selected by: - A [=n] && B [=n] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2018-02-20 17:18:47 +09:00
kconfig: Print reverse dependencies in groups Surprisingly or not, disabling a CONFIG option (which is assumed to be unneeded) may be not so trivial. Especially it is not trivial, when this CONFIG option is selected by a dozen of other configs. Before the moment commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable") popped up in v4.16-rc1, it was an absolute pain to break down the "Selected by" reverse dependency expression in order to identify all those configs which select (IOW *do not allow disabling*) a certain feature (assumed to be not needed). This patch tries to make one step further by putting at users' fingertips the revdep top level OR sub-expressions grouped/clustered by the tristate value they evaluate to. This should allow the users to directly concentrate on and tackle the _active_ reverse dependencies. To give some numbers and quantify the complexity of certain reverse dependencies, assuming commit 617aebe6a97e ("Merge tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux"), ARCH=arm64 and vanilla arm64 defconfig, here is the top 10 CONFIG options with the highest amount of top level "||" sub-expressions/tokens that make up the final "Selected by" reverse dependency expression. | Config | All revdep | Active revdep | |-------------------|------------|---------------| | REGMAP_I2C | 212 | 9 | | CRC32 | 167 | 25 | | FW_LOADER | 128 | 5 | | MFD_CORE | 124 | 9 | | FB_CFB_IMAGEBLIT | 114 | 2 | | FB_CFB_COPYAREA | 111 | 2 | | FB_CFB_FILLRECT | 110 | 2 | | SND_PCM | 103 | 2 | | CRYPTO_HASH | 87 | 19 | | WATCHDOG_CORE | 86 | 6 | The story behind the above is that users need to visually review/evaluate 212 expressions which *potentially* select REGMAP_I2C in order to identify the expressions which *actually* select REGMAP_I2C, for a particular ARCH and for a particular defconfig used. To make this experience smoother, change the way reverse dependencies are displayed to the user from [1] to [2]. [1] Old representation of DMA_ENGINE_RAID: Selected by: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || 440SP) - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] [2] New representation of DMA_ENGINE_RAID: Selected by [y]: - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] Selected by [m]: - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... Selected by [n]: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-24 16:24:18 +01:00
kconfig: clean-up reverse dependency help implementation This commit splits out the special E_OR handling ('-' instead of '||') into a dedicated helper expr_print_revdev(). Restore the original expr_print() prior to commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable"). This makes sense because: - We need to chop those expressions only when printing the reverse dependency, and only when E_OR is encountered - Otherwise, it should be printed as before, so fall back to expr_print() This also improves the behavior; for a single line, it was previously displayed in the same line as "Selected by", like this: Selected by: A [=n] && B [=n] This will be displayed in a new line, consistently: Selected by: - A [=n] && B [=n] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2018-02-20 17:18:47 +09:00
kconfig: Print reverse dependencies in groups Surprisingly or not, disabling a CONFIG option (which is assumed to be unneeded) may be not so trivial. Especially it is not trivial, when this CONFIG option is selected by a dozen of other configs. Before the moment commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable") popped up in v4.16-rc1, it was an absolute pain to break down the "Selected by" reverse dependency expression in order to identify all those configs which select (IOW *do not allow disabling*) a certain feature (assumed to be not needed). This patch tries to make one step further by putting at users' fingertips the revdep top level OR sub-expressions grouped/clustered by the tristate value they evaluate to. This should allow the users to directly concentrate on and tackle the _active_ reverse dependencies. To give some numbers and quantify the complexity of certain reverse dependencies, assuming commit 617aebe6a97e ("Merge tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux"), ARCH=arm64 and vanilla arm64 defconfig, here is the top 10 CONFIG options with the highest amount of top level "||" sub-expressions/tokens that make up the final "Selected by" reverse dependency expression. | Config | All revdep | Active revdep | |-------------------|------------|---------------| | REGMAP_I2C | 212 | 9 | | CRC32 | 167 | 25 | | FW_LOADER | 128 | 5 | | MFD_CORE | 124 | 9 | | FB_CFB_IMAGEBLIT | 114 | 2 | | FB_CFB_COPYAREA | 111 | 2 | | FB_CFB_FILLRECT | 110 | 2 | | SND_PCM | 103 | 2 | | CRYPTO_HASH | 87 | 19 | | WATCHDOG_CORE | 86 | 6 | The story behind the above is that users need to visually review/evaluate 212 expressions which *potentially* select REGMAP_I2C in order to identify the expressions which *actually* select REGMAP_I2C, for a particular ARCH and for a particular defconfig used. To make this experience smoother, change the way reverse dependencies are displayed to the user from [1] to [2]. [1] Old representation of DMA_ENGINE_RAID: Selected by: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || 440SP) - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] [2] New representation of DMA_ENGINE_RAID: Selected by [y]: - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] Selected by [m]: - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... Selected by [n]: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-24 16:24:18 +01:00
kconfig: clean-up reverse dependency help implementation This commit splits out the special E_OR handling ('-' instead of '||') into a dedicated helper expr_print_revdev(). Restore the original expr_print() prior to commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable"). This makes sense because: - We need to chop those expressions only when printing the reverse dependency, and only when E_OR is encountered - Otherwise, it should be printed as before, so fall back to expr_print() This also improves the behavior; for a single line, it was previously displayed in the same line as "Selected by", like this: Selected by: A [=n] && B [=n] This will be displayed in a new line, consistently: Selected by: - A [=n] && B [=n] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2018-02-20 17:18:47 +09:00
kconfig: Print reverse dependencies in groups Surprisingly or not, disabling a CONFIG option (which is assumed to be unneeded) may be not so trivial. Especially it is not trivial, when this CONFIG option is selected by a dozen of other configs. Before the moment commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable") popped up in v4.16-rc1, it was an absolute pain to break down the "Selected by" reverse dependency expression in order to identify all those configs which select (IOW *do not allow disabling*) a certain feature (assumed to be not needed). This patch tries to make one step further by putting at users' fingertips the revdep top level OR sub-expressions grouped/clustered by the tristate value they evaluate to. This should allow the users to directly concentrate on and tackle the _active_ reverse dependencies. To give some numbers and quantify the complexity of certain reverse dependencies, assuming commit 617aebe6a97e ("Merge tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux"), ARCH=arm64 and vanilla arm64 defconfig, here is the top 10 CONFIG options with the highest amount of top level "||" sub-expressions/tokens that make up the final "Selected by" reverse dependency expression. | Config | All revdep | Active revdep | |-------------------|------------|---------------| | REGMAP_I2C | 212 | 9 | | CRC32 | 167 | 25 | | FW_LOADER | 128 | 5 | | MFD_CORE | 124 | 9 | | FB_CFB_IMAGEBLIT | 114 | 2 | | FB_CFB_COPYAREA | 111 | 2 | | FB_CFB_FILLRECT | 110 | 2 | | SND_PCM | 103 | 2 | | CRYPTO_HASH | 87 | 19 | | WATCHDOG_CORE | 86 | 6 | The story behind the above is that users need to visually review/evaluate 212 expressions which *potentially* select REGMAP_I2C in order to identify the expressions which *actually* select REGMAP_I2C, for a particular ARCH and for a particular defconfig used. To make this experience smoother, change the way reverse dependencies are displayed to the user from [1] to [2]. [1] Old representation of DMA_ENGINE_RAID: Selected by: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || 440SP) - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] [2] New representation of DMA_ENGINE_RAID: Selected by [y]: - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] Selected by [m]: - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... Selected by [n]: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-24 16:24:18 +01:00
kconfig: make "Selected by:" and "Implied by:" readable Reverse dependency expressions can get rather unwieldy, especially if a symbol is selected by more than a handful of other symbols. I.e. it's possible to have near endless expressions like: A && B && !C || D || F && (G || H) || [...] Chop these expressions into actually readable chunks: - A && B && !C - D - F && (G || H) - [...] I.e. transform the top level OR tokens into newlines and prepend each line with a minus. This makes the "Selected by:" and "Implied by:" blurb much easier to read. This is done only if there is more than one top level OR. "Depends on:" and "Range :" were deliberately left as they are. Based on idea from Paul Bolle. Suggested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-25 10:46:35 +01:00
kconfig: Print reverse dependencies in groups Surprisingly or not, disabling a CONFIG option (which is assumed to be unneeded) may be not so trivial. Especially it is not trivial, when this CONFIG option is selected by a dozen of other configs. Before the moment commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable") popped up in v4.16-rc1, it was an absolute pain to break down the "Selected by" reverse dependency expression in order to identify all those configs which select (IOW *do not allow disabling*) a certain feature (assumed to be not needed). This patch tries to make one step further by putting at users' fingertips the revdep top level OR sub-expressions grouped/clustered by the tristate value they evaluate to. This should allow the users to directly concentrate on and tackle the _active_ reverse dependencies. To give some numbers and quantify the complexity of certain reverse dependencies, assuming commit 617aebe6a97e ("Merge tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux"), ARCH=arm64 and vanilla arm64 defconfig, here is the top 10 CONFIG options with the highest amount of top level "||" sub-expressions/tokens that make up the final "Selected by" reverse dependency expression. | Config | All revdep | Active revdep | |-------------------|------------|---------------| | REGMAP_I2C | 212 | 9 | | CRC32 | 167 | 25 | | FW_LOADER | 128 | 5 | | MFD_CORE | 124 | 9 | | FB_CFB_IMAGEBLIT | 114 | 2 | | FB_CFB_COPYAREA | 111 | 2 | | FB_CFB_FILLRECT | 110 | 2 | | SND_PCM | 103 | 2 | | CRYPTO_HASH | 87 | 19 | | WATCHDOG_CORE | 86 | 6 | The story behind the above is that users need to visually review/evaluate 212 expressions which *potentially* select REGMAP_I2C in order to identify the expressions which *actually* select REGMAP_I2C, for a particular ARCH and for a particular defconfig used. To make this experience smoother, change the way reverse dependencies are displayed to the user from [1] to [2]. [1] Old representation of DMA_ENGINE_RAID: Selected by: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || 440SP) - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] [2] New representation of DMA_ENGINE_RAID: Selected by [y]: - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] Selected by [m]: - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... Selected by [n]: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-24 16:24:18 +01:00
kconfig: make "Selected by:" and "Implied by:" readable Reverse dependency expressions can get rather unwieldy, especially if a symbol is selected by more than a handful of other symbols. I.e. it's possible to have near endless expressions like: A && B && !C || D || F && (G || H) || [...] Chop these expressions into actually readable chunks: - A && B && !C - D - F && (G || H) - [...] I.e. transform the top level OR tokens into newlines and prepend each line with a minus. This makes the "Selected by:" and "Implied by:" blurb much easier to read. This is done only if there is more than one top level OR. "Depends on:" and "Range :" were deliberately left as they are. Based on idea from Paul Bolle. Suggested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-25 10:46:35 +01:00