kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-14 05:55:17 +00:00
Code Issues Releases Packages Activity
linux/net/ethtool/features.c

288 lines
8.8 KiB
Raw Permalink Normal View History

ethtool: provide netdev features with FEATURES_GET request Implement FEATURES_GET request to get network device features. These are traditionally available via ETHTOOL_GFEATURES ioctl request. v2: - style cleanup suggested by Jakub Kicinski Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:48 +01:00
ethtool: trim policy tables Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:35 -07:00
ethtool: link up ethnl_header_policy as a nested policy To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:36 -07:00
ethtool: provide netdev features with FEATURES_GET request Implement FEATURES_GET request to get network device features. These are traditionally available via ETHTOOL_GFEATURES ioctl request. v2: - style cleanup suggested by Jakub Kicinski Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:48 +01:00
ethtool: netlink: always pass genl_info to .prepare_data We had a number of bugs in the past because developers forgot to fully test dumps, which pass NULL as info to .prepare_data. .prepare_data implementations would try to access info->extack leading to a null-deref. Now that dumps and notifications can access struct genl_info we can pass it in, and remove the info null checks. Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # pause Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230814214723.2924989-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14 14:47:23 -07:00
ethtool: provide netdev features with FEATURES_GET request Implement FEATURES_GET request to get network device features. These are traditionally available via ETHTOOL_GFEATURES ioctl request. v2: - style cleanup suggested by Jakub Kicinski Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:48 +01:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: trim policy tables Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:35 -07:00
ethtool: link up ethnl_header_policy as a nested policy To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:36 -07:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: Fix preserving of wanted feature bits in netlink interface Currently, ethtool-netlink calculates new wanted bits as: (req_wanted & req_mask) | (old_active & ~req_mask) It completely discards the old wanted bits, so they are forgotten with the next ethtool command. Sample steps to reproduce: 1. ethtool -k eth0 tx-tcp-segmentation: on # TSO is on from the beginning 2. ethtool -K eth0 tx off tx-tcp-segmentation: off [not requested] 3. ethtool -k eth0 tx-tcp-segmentation: off [requested on] 4. ethtool -K eth0 rx off # Some change unrelated to TSO 5. ethtool -k eth0 tx-tcp-segmentation: off # "Wanted on" is forgotten This commit fixes it by changing the formula to: (req_wanted & req_mask) | (old_wanted & ~req_mask), where old_active was replaced by old_wanted to account for the wanted bits. The shortcut condition for the case where nothing was changed now compares wanted bitmasks, instead of wanted to active. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17 16:34:05 +03:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: Fix preserving of wanted feature bits in netlink interface Currently, ethtool-netlink calculates new wanted bits as: (req_wanted & req_mask) | (old_active & ~req_mask) It completely discards the old wanted bits, so they are forgotten with the next ethtool command. Sample steps to reproduce: 1. ethtool -k eth0 tx-tcp-segmentation: on # TSO is on from the beginning 2. ethtool -K eth0 tx off tx-tcp-segmentation: off [not requested] 3. ethtool -k eth0 tx-tcp-segmentation: off [requested on] 4. ethtool -K eth0 rx off # Some change unrelated to TSO 5. ethtool -k eth0 tx-tcp-segmentation: off # "Wanted on" is forgotten This commit fixes it by changing the formula to: (req_wanted & req_mask) | (old_wanted & ~req_mask), where old_active was replaced by old_wanted to account for the wanted bits. The shortcut condition for the case where nothing was changed now compares wanted bitmasks, instead of wanted to active. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17 16:34:05 +03:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: wire up set policies to ops Similarly to get commands wire up the policies of set commands to get parsing by the core and policy dumps. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:34 -07:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: add FEATURES_NTF notification Send ETHTOOL_MSG_FEATURES_NTF notification whenever network device features are modified using ETHTOOL_MSG_FEATURES_SET netlink message, ethtool ioctl request or any other way resulting in call to netdev_update_features() or netdev_change_features() Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:03 +01:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: Fix preserving of wanted feature bits in netlink interface Currently, ethtool-netlink calculates new wanted bits as: (req_wanted & req_mask) | (old_active & ~req_mask) It completely discards the old wanted bits, so they are forgotten with the next ethtool command. Sample steps to reproduce: 1. ethtool -k eth0 tx-tcp-segmentation: on # TSO is on from the beginning 2. ethtool -K eth0 tx off tx-tcp-segmentation: off [not requested] 3. ethtool -k eth0 tx-tcp-segmentation: off [requested on] 4. ethtool -K eth0 rx off # Some change unrelated to TSO 5. ethtool -k eth0 tx-tcp-segmentation: off # "Wanted on" is forgotten This commit fixes it by changing the formula to: (req_wanted & req_mask) | (old_wanted & ~req_mask), where old_active was replaced by old_wanted to account for the wanted bits. The shortcut condition for the case where nothing was changed now compares wanted bitmasks, instead of wanted to active. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17 16:34:05 +03:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: Fix preserving of wanted feature bits in netlink interface Currently, ethtool-netlink calculates new wanted bits as: (req_wanted & req_mask) | (old_active & ~req_mask) It completely discards the old wanted bits, so they are forgotten with the next ethtool command. Sample steps to reproduce: 1. ethtool -k eth0 tx-tcp-segmentation: on # TSO is on from the beginning 2. ethtool -K eth0 tx off tx-tcp-segmentation: off [not requested] 3. ethtool -k eth0 tx-tcp-segmentation: off [requested on] 4. ethtool -K eth0 rx off # Some change unrelated to TSO 5. ethtool -k eth0 tx-tcp-segmentation: off # "Wanted on" is forgotten This commit fixes it by changing the formula to: (req_wanted & req_mask) | (old_wanted & ~req_mask), where old_active was replaced by old_wanted to account for the wanted bits. The shortcut condition for the case where nothing was changed now compares wanted bitmasks, instead of wanted to active. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17 16:34:05 +03:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: Fix preserving of wanted feature bits in netlink interface Currently, ethtool-netlink calculates new wanted bits as: (req_wanted & req_mask) | (old_active & ~req_mask) It completely discards the old wanted bits, so they are forgotten with the next ethtool command. Sample steps to reproduce: 1. ethtool -k eth0 tx-tcp-segmentation: on # TSO is on from the beginning 2. ethtool -K eth0 tx off tx-tcp-segmentation: off [not requested] 3. ethtool -k eth0 tx-tcp-segmentation: off [requested on] 4. ethtool -K eth0 rx off # Some change unrelated to TSO 5. ethtool -k eth0 tx-tcp-segmentation: off # "Wanted on" is forgotten This commit fixes it by changing the formula to: (req_wanted & req_mask) | (old_wanted & ~req_mask), where old_active was replaced by old_wanted to account for the wanted bits. The shortcut condition for the case where nothing was changed now compares wanted bitmasks, instead of wanted to active. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17 16:34:05 +03:00
ethtool: Don't omit the netlink reply if no features were changed The legacy ethtool userspace tool shows an error when no features could be changed. It's useful to have a netlink reply to be able to show this error when __netdev_update_features wasn't called, for example: 1. ethtool -k eth0 large-receive-offload: off 2. ethtool -K eth0 rx-fcs on 3. ethtool -K eth0 lro on Could not change any device features rx-lro: off [requested on] 4. ethtool -K eth0 lro on # The output should be the same, but without this patch the kernel # doesn't send the reply, and ethtool is unable to detect the error. This commit makes ethtool-netlink always return a reply when requested, and it still avoids unnecessary calls to __netdev_update_features if the wanted features haven't changed. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17 16:34:07 +03:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: add FEATURES_NTF notification Send ETHTOOL_MSG_FEATURES_NTF notification whenever network device features are modified using ETHTOOL_MSG_FEATURES_SET netlink message, ethtool ioctl request or any other way resulting in call to netdev_update_features() or netdev_change_features() Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:03 +01:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: add FEATURES_NTF notification Send ETHTOOL_MSG_FEATURES_NTF notification whenever network device features are modified using ETHTOOL_MSG_FEATURES_SET netlink message, ethtool ioctl request or any other way resulting in call to netdev_update_features() or netdev_change_features() Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:03 +01:00
ethtool: netlink: add missing netdev_features_change() call After updating userspace Ethtool from 5.7 to 5.9, I noticed that NETDEV_FEAT_CHANGE is no more raised when changing netdev features through Ethtool. That's because the old Ethtool ioctl interface always calls netdev_features_change() at the end of user request processing to inform the kernel that our netdevice has some features changed, but the new Netlink interface does not. Instead, it just notifies itself with ETHTOOL_MSG_FEATURES_NTF. Replace this ethtool_notify() call with netdev_features_change(), so the kernel will be aware of any features changes, just like in case with the ioctl interface. This does not omit Ethtool notifications, as Ethtool itself listens to NETDEV_FEAT_CHANGE and drops ETHTOOL_MSG_FEATURES_NTF on it (net/ethtool/netlink.c:ethnl_netdev_event()). From v1 [1]: - dropped extra new line as advised by Jakub; - no functional changes. [1] https://lore.kernel.org/netdev/AlZXQ2o5uuTVHCfNGOiGgJ8vJ3KgO5YIWAnQjH0cDE@cp3-web-009.plabs.ch Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/ahA2YWXYICz5rbUSQqNG4roJ8OlJzzYQX7PTiG80@cp4-web-028.plabs.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-08 00:46:15 +00:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: use ethnl_parse_header_dev_put() It seems I missed that most ethnl_parse_header_dev_get() callers declare an on-stack struct ethnl_req_info, and that they simply call dev_put(req_info.dev) when about to return. Add ethnl_parse_header_dev_put() helper to properly untrack reference taken by ethnl_parse_header_dev_get(). Fixes: e4b8954074f6 ("netlink: add net device refcount tracker to struct ethnl_req_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14 00:42:30 -08:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00