linux/include/sound/sof.h

182 lines
4.7 KiB

ASoC: SOF: Pass PCI SSID to machine driver Pass the PCI SSID of the audio interface through to the machine driver. This allows the machine driver to use the SSID to uniquely identify the specific hardware configuration and apply any platform-specific configuration. struct snd_sof_pdata is passed around inside the SOF code, but it then passes configuration information to the machine driver through struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID information has been added to both snd_sof_pdata and snd_soc_acpi_mach_params. PCI does not define 0x0000 as an invalid value so we can't use zero to indicate that the struct member was not written. Instead a flag is included to indicate that a value has been written to the subsystem_vendor and subsystem_device members. sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct pci_dev so it can fill in the SSID value. sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It copies the SSID information across to the struct snd_soc_acpi_mach_params. This done before calling any custom set_mach_params() so that it could be used by the set_mach_params() callback to apply variant params. The machine driver receives the struct snd_soc_acpi_mach as its platform_data. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-12 17:32:05 +01:00
ASoC: SOF: Add support for on-demand DSP boot On system suspend / resume we always power up the DSP and boot the firmware, which is not strictly needed as right after the firmware booted up we power the DSP down again on suspend and we also power it down after resume after some inactivity. Out of caution, add a new platform descriptor flag to enable on-demand DSP boot since this might not work without changes to platform code on certain platforms. With the on-demand dsp boot enabled we will not boot the DSP and firmware up on system or rpm resume, just enable audio subsystem since audio IPs, like HDA and SoundWire might be needed (codecs suspend/resume operation). Only boot up the DSP during the first hw_params() call when the DSP is really going to be needed. In this way we can handle the audio related use cases: normal audio use (rpm suspend/resume) system suspend/resume without active audio system suspend/resume with active audio system suspend/resume without active audio, and audio start before the rpm suspend timeout Add module option to force the on-demand DSP boot to allow it to be disabled or enabled without kernel change for testing. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Link: https://patch.msgid.link/20251215132946.2155-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-12-15 15:29:41 +02:00