kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/drivers/interconnect/debugfs-client.c

183 lines
3.8 KiB
Raw Permalink Normal View History

interconnect: Add debugfs test client It's often useful during test, debug, and development to issue path votes from shell. Add a debugfs client for this purpose. Example usage: cd /sys/kernel/debug/interconnect/test-client/ # Configure node endpoints for the path from CPU to DDR on # qcom/sm8550. echo chm_apps > src_node echo ebi > dst_node # Get path between src_node and dst_node. This is only # necessary after updating the node endpoints. echo 1 > get # Set desired BW to 1GBps avg and 2GBps peak. echo 1000000 > avg_bw echo 2000000 > peak_bw # Vote for avg_bw and peak_bw on the latest path from "get". # Voting for multiple paths is possible by repeating this # process for different nodes endpoints. echo 1 > commit Allowing userspace to directly enable and set bus rates can be dangerous So, following in the footsteps of the regmap [0] and clk [1] frameworks, keep these userspace controls compile-time disabled without Kconfig options to enable them. Enabling this will require code changes to define INTERCONNECT_ALLOW_WRITE_DEBUGFS. [0] commit 09c6ecd39410 ("regmap: Add support for writing to regmap registers via debugfs") [1] commit 37215da5553e ("clk: Add support for setting clk_rate via debugfs") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20230807142914.12480-4-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-08-07 07:29:14 -07:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
interconnect: Add debugfs test client It's often useful during test, debug, and development to issue path votes from shell. Add a debugfs client for this purpose. Example usage: cd /sys/kernel/debug/interconnect/test-client/ # Configure node endpoints for the path from CPU to DDR on # qcom/sm8550. echo chm_apps > src_node echo ebi > dst_node # Get path between src_node and dst_node. This is only # necessary after updating the node endpoints. echo 1 > get # Set desired BW to 1GBps avg and 2GBps peak. echo 1000000 > avg_bw echo 2000000 > peak_bw # Vote for avg_bw and peak_bw on the latest path from "get". # Voting for multiple paths is possible by repeating this # process for different nodes endpoints. echo 1 > commit Allowing userspace to directly enable and set bus rates can be dangerous So, following in the footsteps of the regmap [0] and clk [1] frameworks, keep these userspace controls compile-time disabled without Kconfig options to enable them. Enabling this will require code changes to define INTERCONNECT_ALLOW_WRITE_DEBUGFS. [0] commit 09c6ecd39410 ("regmap: Add support for writing to regmap registers via debugfs") [1] commit 37215da5553e ("clk: Add support for setting clk_rate via debugfs") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20230807142914.12480-4-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-08-07 07:29:14 -07:00
interconnect: debugfs: Fix incorrect error handling for NULL path The icc_commit_set() function, used by the debugfs interface, checks the validity of the global cur_path pointer using IS_ERR_OR_NULL(). However, in the specific case where cur_path is NULL, while IS_ERR_OR_NULL(NULL) correctly evaluates to true, the subsequent call to PTR_ERR(NULL) returns 0. This causes the function to return a success code (0) instead of an error, misleading the user into believing their bandwidth request was successfully committed when, in fact, no operation was performed. Fix this by adding an explicit check to return -EINVAL if cur_path is NULL. This prevents silent failures and ensures that an invalid operational sequence is immediately and clearly reported as an error. Fixes: 770c69f037c1 ("interconnect: Add debugfs test client") Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Link: https://lore.kernel.org/r/20251010151447.2289779-1-visitorckw@gmail.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2025-10-10 23:14:47 +08:00
interconnect: Add debugfs test client It's often useful during test, debug, and development to issue path votes from shell. Add a debugfs client for this purpose. Example usage: cd /sys/kernel/debug/interconnect/test-client/ # Configure node endpoints for the path from CPU to DDR on # qcom/sm8550. echo chm_apps > src_node echo ebi > dst_node # Get path between src_node and dst_node. This is only # necessary after updating the node endpoints. echo 1 > get # Set desired BW to 1GBps avg and 2GBps peak. echo 1000000 > avg_bw echo 2000000 > peak_bw # Vote for avg_bw and peak_bw on the latest path from "get". # Voting for multiple paths is possible by repeating this # process for different nodes endpoints. echo 1 > commit Allowing userspace to directly enable and set bus rates can be dangerous So, following in the footsteps of the regmap [0] and clk [1] frameworks, keep these userspace controls compile-time disabled without Kconfig options to enable them. Enabling this will require code changes to define INTERCONNECT_ALLOW_WRITE_DEBUGFS. [0] commit 09c6ecd39410 ("regmap: Add support for writing to regmap registers via debugfs") [1] commit 37215da5553e ("clk: Add support for setting clk_rate via debugfs") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20230807142914.12480-4-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-08-07 07:29:14 -07:00
interconnect: debugfs-client: add NULL check for platform_device_alloc platform_device_alloc() may return NULL when memory allocation fails. Add proper error handling to prevent a potential NULL pointer dereference when calling platform_device_add() with a NULL pointer. Signed-off-by: Li Jun <lijun01@kylinos.cn> Link: https://patch.msgid.link/20260602103120.2966458-1-lijun01@kylinos.cn Signed-off-by: Georgi Djakov <djakov@kernel.org>
2026-06-02 18:31:20 +08:00
interconnect: Add debugfs test client It's often useful during test, debug, and development to issue path votes from shell. Add a debugfs client for this purpose. Example usage: cd /sys/kernel/debug/interconnect/test-client/ # Configure node endpoints for the path from CPU to DDR on # qcom/sm8550. echo chm_apps > src_node echo ebi > dst_node # Get path between src_node and dst_node. This is only # necessary after updating the node endpoints. echo 1 > get # Set desired BW to 1GBps avg and 2GBps peak. echo 1000000 > avg_bw echo 2000000 > peak_bw # Vote for avg_bw and peak_bw on the latest path from "get". # Voting for multiple paths is possible by repeating this # process for different nodes endpoints. echo 1 > commit Allowing userspace to directly enable and set bus rates can be dangerous So, following in the footsteps of the regmap [0] and clk [1] frameworks, keep these userspace controls compile-time disabled without Kconfig options to enable them. Enabling this will require code changes to define INTERCONNECT_ALLOW_WRITE_DEBUGFS. [0] commit 09c6ecd39410 ("regmap: Add support for writing to regmap registers via debugfs") [1] commit 37215da5553e ("clk: Add support for setting clk_rate via debugfs") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20230807142914.12480-4-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-08-07 07:29:14 -07:00
interconnect: debugfs: fix devm_kstrdup and kfree mismatch debugfs_write_file_str() uses standard kfree() to release old strings. Initializing src_node and dst_node with devm_kstrdup() creates a memory management mismatch. If a user writes to these debugfs nodes, the devm-allocated memory is freed via kfree(), leaving a dangling pointer in the device resource list that can lead to a double free. Fix this by using standard kstrdup() instead. Since the interconnect subsystem is strictly built-in and cannot be unloaded as a module, there is no exit path requiring manual cleanup of these strings. The error handling path is also simplified by taking advantage of the fact that kfree(NULL) is a safe no-op. Fixes: 8cc27f5c6dd1 ("interconnect: debugfs: initialize src_node and dst_node to empty strings") Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com> Link: https://msgid.link/20260318024815.7655-1-hanguidong02@gmail.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2026-03-18 10:48:15 +08:00
interconnect: debugfs: initialize src_node and dst_node to empty strings The debugfs_create_str() API assumes that the string pointer is either NULL or points to valid kmalloc() memory. Leaving the pointer uninitialized can cause problems. Initialize src_node and dst_node to empty strings before creating the debugfs entries to guarantee that reads and writes are safe. Fixes: 770c69f037c1 ("interconnect: Add debugfs test client") Signed-off-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com> Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com> Link: https://lore.kernel.org/r/20260109122523.125843-1-djakov@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2026-01-09 14:25:23 +02:00
interconnect: debugfs: fix devm_kstrdup and kfree mismatch debugfs_write_file_str() uses standard kfree() to release old strings. Initializing src_node and dst_node with devm_kstrdup() creates a memory management mismatch. If a user writes to these debugfs nodes, the devm-allocated memory is freed via kfree(), leaving a dangling pointer in the device resource list that can lead to a double free. Fix this by using standard kstrdup() instead. Since the interconnect subsystem is strictly built-in and cannot be unloaded as a module, there is no exit path requiring manual cleanup of these strings. The error handling path is also simplified by taking advantage of the fact that kfree(NULL) is a safe no-op. Fixes: 8cc27f5c6dd1 ("interconnect: debugfs: initialize src_node and dst_node to empty strings") Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com> Link: https://msgid.link/20260318024815.7655-1-hanguidong02@gmail.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2026-03-18 10:48:15 +08:00
interconnect: debugfs: initialize src_node and dst_node to empty strings The debugfs_create_str() API assumes that the string pointer is either NULL or points to valid kmalloc() memory. Leaving the pointer uninitialized can cause problems. Initialize src_node and dst_node to empty strings before creating the debugfs entries to guarantee that reads and writes are safe. Fixes: 770c69f037c1 ("interconnect: Add debugfs test client") Signed-off-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com> Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com> Link: https://lore.kernel.org/r/20260109122523.125843-1-djakov@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2026-01-09 14:25:23 +02:00
interconnect: Add debugfs test client It's often useful during test, debug, and development to issue path votes from shell. Add a debugfs client for this purpose. Example usage: cd /sys/kernel/debug/interconnect/test-client/ # Configure node endpoints for the path from CPU to DDR on # qcom/sm8550. echo chm_apps > src_node echo ebi > dst_node # Get path between src_node and dst_node. This is only # necessary after updating the node endpoints. echo 1 > get # Set desired BW to 1GBps avg and 2GBps peak. echo 1000000 > avg_bw echo 2000000 > peak_bw # Vote for avg_bw and peak_bw on the latest path from "get". # Voting for multiple paths is possible by repeating this # process for different nodes endpoints. echo 1 > commit Allowing userspace to directly enable and set bus rates can be dangerous So, following in the footsteps of the regmap [0] and clk [1] frameworks, keep these userspace controls compile-time disabled without Kconfig options to enable them. Enabling this will require code changes to define INTERCONNECT_ALLOW_WRITE_DEBUGFS. [0] commit 09c6ecd39410 ("regmap: Add support for writing to regmap registers via debugfs") [1] commit 37215da5553e ("clk: Add support for setting clk_rate via debugfs") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20230807142914.12480-4-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-08-07 07:29:14 -07:00