kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/block/opal_proto.h

509 lines
10 KiB
Raw Permalink Normal View History

block: switch all files cleared marked as GPLv2 to SPDX tags All these files have some form of the usual GPLv2 boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30 14:42:39 -04:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block/sed-opal: allocate struct opal_dev dynamically Insted of bloating the containing structure with it all the time this allocates struct opal_dev dynamically. Additionally this allows moving the definition of struct opal_dev into sed-opal.c. For this a new private data field is added to it that is passed to the send/receive callback. After that a lot of internals can be made private as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Scott Bauer <scott.bauer@intel.com> Reviewed-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 13:59:39 +01:00
sed-opal: Add STACK_RESET command The TCG Opal device could enter a state where no new session can be created, blocking even Discovery or PSID reset. While a power cycle or waiting for the timeout should work, there is another possibility for recovery: using the Stack Reset command. The Stack Reset command is defined in the TCG Storage Architecture Core Specification and is mandatory for all Opal devices (see Section 3.3.6 of the Opal SSC specification). This patch implements the Stack Reset command. Sending it should clear all active sessions immediately, allowing subsequent commands to run successfully. While it is a TCG transport layer command, the Linux kernel implements only Opal ioctls, so it makes sense to use the IOC_OPAL ioctl interface. The Stack Reset takes no arguments; the response can be success or pending. If the command reports a pending state, userspace can try to repeat it; in this case, the code returns -EBUSY. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Ondrej Kozina <okozina@redhat.com> Link: https://patch.msgid.link/20260310095349.411287-1-gmazyland@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-03-10 10:53:49 +01:00
block/sed-opal: allocate struct opal_dev dynamically Insted of bloating the containing structure with it all the time this allocates struct opal_dev dynamically. Additionally this allows moving the definition of struct opal_dev into sed-opal.c. For this a new private data field is added to it that is passed to the send/receive callback. After that a lot of internals can be made private as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Scott Bauer <scott.bauer@intel.com> Reviewed-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 13:59:39 +01:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: Change the check condition for regular session validity This patch changes the check condition for the validity/authentication of the session. 1. The Host Session Number(HSN) in the response should match the HSN for the session. 2. The TPER Session Number(TSN) can never be less than 4096 for a regular session. Reference: Section 3.2.2.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage_Opal_SSC_Application_Note_1-00_1-00-Final.pdf Section 3.3.7.1.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage_Architecture_Core_Spec_v2.01_r1.00.pdf Co-developed-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com> Signed-off-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-03 12:17:00 -07:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: Add ioctl to return device status Provide a mechanism to retrieve basic status information about the device, including the "supported" flag indicating whether SED-OPAL is supported. The information returned is from the various feature descriptors received during the discovery0 step, and so this ioctl does nothing more than perform the discovery0 step and then save the information received. See "struct opal_status" and OPAL_FL_* bits for the status information currently returned. This is necessary to be able to check whether a device is OPAL enabled, set up, locked or unlocked from userspace programs like systemd-cryptsetup and libcryptsetup. Right now we just have to assume the user 'knows' or blindly attempt setup/lock/unlock operations. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Tested-by: Luca Boccassi <bluca@debian.org> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20220816140713.84893-1-luca.boccassi@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-16 15:07:13 +01:00
block: sed-opal: Set MBRDone on S3 resume path if TPER is MBREnabled Users who are booting off their Opal enabled drives are having issues when they have a shadow MBR set up after s3/resume cycle. When the Drive has a shadow MBR setup the MBRDone flag is set to false upon power loss (S3/S4/S5). When the MBRDone flag is false I/O to LBA 0 -> LBA_END_MBR are remapped to the shadow mbr of the drive. If the drive contains useful data in the 0 -> end_mbr range upon s3 resume the user can never get to that data as the drive will keep remapping it to the MBR. To fix this when we unlock on S3 resume, we need to tell the drive that we're done with the shadow mbr (even though we didnt use it) by setting true to MBRDone. This way the drive will stop the remapping and the user can access their data. Acked-by Jon Derrick: <jonathan.derrick@intel.com> Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-01 08:53:35 -06:00
block: sed-opal: Add ioctl to return device status Provide a mechanism to retrieve basic status information about the device, including the "supported" flag indicating whether SED-OPAL is supported. The information returned is from the various feature descriptors received during the discovery0 step, and so this ioctl does nothing more than perform the discovery0 step and then save the information received. See "struct opal_status" and OPAL_FL_* bits for the status information currently returned. This is necessary to be able to check whether a device is OPAL enabled, set up, locked or unlocked from userspace programs like systemd-cryptsetup and libcryptsetup. Right now we just have to assume the user 'knows' or blindly attempt setup/lock/unlock operations. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Tested-by: Luca Boccassi <bluca@debian.org> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20220816140713.84893-1-luca.boccassi@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-16 15:07:13 +01:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: handle empty atoms when parsing response The SED Opal response parsing function response_parse() does not handle the case of an empty atom in the response. This causes the entry count to be too high and the response fails to be parsed. Recognizing, but ignoring, empty atoms allows response handling to succeed. Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com> Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-16 15:04:17 -06:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
sed-opal: add helper for adding user authorities in ACE. Move ACE construction away from add_user_to_lr routine and refactor it to be used also in later code. Also adds boolean operators defines from TCG Core specification. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-3-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05 13:12:20 +02:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: check size of shadow mbr Check whether the shadow mbr does fit in the provided space on the target. Also a proper firmware should handle this case and return an error we may prevent problems or even damage with crappy firmwares. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-21 22:46:46 +02:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
sed-opal: allow user authority to get locking range attributes. Extend ACE set of locking range attributes accessible to user authority. This patch allows user authority to get following locking range attribues when user get added to locking range via IOC_OPAL_ADD_USR_TO_LR: locking range start locking range end read lock enabled write lock enabled read locked write locked lock on reset active key Note: Admin1 authority always remains in the ACE. Otherwise it breaks current userspace expecting Admin1 in the ACE (sedutils). See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey". Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230405111223.272816-4-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05 13:12:21 +02:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: Introduce Opal Datastore UID This patch introduces Opal Datastore UID. The generic read/write table ioctl can use this UID to access the Opal Datastore. Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-31 10:13:22 -06:00
sed-opal: add UID of Locking Table. As described in ch. 6.3, Table 240 in TCG Storage Architecture Core Specification document. It's also referenced in TCG Storage Opal SSC Feature Set: Single User Mode document, ch. 3.1.1.1 Reactivate method. It will be used later in Reactivate method implemetation for sed-opal interface. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-and-tested-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-02-06 15:17:55 +01:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
sed-opal: add IOC_OPAL_REACTIVATE_LSP. This adds the 'Reactivate' method as described in the "TCG Storage Opal SSC Feature Set: Single User Mode" document (ch. 3.1.1.1). The method enables switching an already active SED OPAL2 device, with appropriate firmware support for Single User Mode (SUM), to or from SUM. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-and-tested-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-02-06 15:17:58 +01:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: check size of shadow mbr Check whether the shadow mbr does fit in the provided space on the target. Also a proper firmware should handle this case and return an error we may prevent problems or even damage with crappy firmwares. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-21 22:46:46 +02:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: add token for OPAL_LIFECYCLE Define OPAL_LIFECYCLE token and use it instead of literals in get_lsp_lifecycle. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-14 01:16:03 +01:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: Add/remove spaces Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20 09:30:49 -06:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64' In function 'activate_lsp', rather than hard-coding the short atom header(0x83), we need to let the function 'add_short_atom_header' append the header based on the parameter being appended. The parameter has been defined in Section 3.1.2.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage-Opal_Feature_Set_Single_User_Mode_v1-00_r1-00-Final.pdf Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08 16:09:04 -07:00
sed-opal: add RangeStartRangeLengthPolicy parameter. As desribed in ch. 3.1.1.1.1.2 of TCG Storage Opal SSC Feature Set: Single User Mode document. To be used later in Reactivate method implementation and in function for retrieving SUM device status. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-and-tested-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-02-06 15:17:56 +01:00
sed-opal: add Admin1PIN parameter. As desribed in ch. 3.1.1.1.1.3 of TCG Storage Opal SSC Feature Set: Single User Mode document. To be used later in Reactivate method implementation. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-and-tested-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-02-06 15:17:57 +01:00
block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64' In function 'activate_lsp', rather than hard-coding the short atom header(0x83), we need to let the function 'add_short_atom_header' append the header based on the parameter being appended. The parameter has been defined in Section 3.1.2.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage-Opal_Feature_Set_Single_User_Mode_v1-00_r1-00-Final.pdf Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08 16:09:04 -07:00
block: sed-opal: Implement IOC_OPAL_REVERT_LSP This is used in conjunction with IOC_OPAL_REVERT_TPR to return a drive to Original Factory State without erasing the data. If IOC_OPAL_REVERT_LSP is called with opal_revert_lsp.options bit OPAL_PRESERVE set prior to calling IOC_OPAL_REVERT_TPR, the drive global locking range will not be erased. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230721211534.3437070-3-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-21 16:15:33 -05:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00
sed-opal: Add STACK_RESET command The TCG Opal device could enter a state where no new session can be created, blocking even Discovery or PSID reset. While a power cycle or waiting for the timeout should work, there is another possibility for recovery: using the Stack Reset command. The Stack Reset command is defined in the TCG Storage Architecture Core Specification and is mandatory for all Opal devices (see Section 3.3.6 of the Opal SSC specification). This patch implements the Stack Reset command. Sending it should clear all active sessions immediately, allowing subsequent commands to run successfully. While it is a TCG transport layer command, the Linux kernel implements only Opal ioctls, so it makes sense to use the IOC_OPAL ioctl interface. The Stack Reset takes no arguments; the response can be success or pending. If the command reports a pending state, userspace can try to repeat it; in this case, the code returns -EBUSY. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Ondrej Kozina <okozina@redhat.com> Link: https://patch.msgid.link/20260310095349.411287-1-gmazyland@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-03-10 10:53:49 +01:00
block: Add Sed-opal library This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 12:50:31 -07:00