linux

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2019-05-27 08:55:05 +02:00

Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-06 00:52:11 -07:00

Bluetooth: btintel: Add infrastructure to read controller information New generation Intel controllers returns version information in TLV format. This patch adds, 1) Enums, structures for TLV 2) function to read controller information, parse TLV data and populate intel_version_tlv structure 3) function to print version information Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2020-09-14 18:55:05 +05:30

Bluetooth: btintel: Print firmware SHA1 Intel Read Version event contains a TLV(0x32) having firmware sha1 in operational image. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-11-27 10:12:02 +05:30

2024-06-19 15:39:33 +05:30

Bluetooth: btintel: Add infrastructure to read controller information New generation Intel controllers returns version information in TLV format. This patch adds, 1) Enums, structures for TLV 2) function to read controller information, parse TLV data and populate intel_version_tlv structure 3) function to print version information Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2020-09-14 18:55:05 +05:30

Bluetooth: btintel: Replace zero-length array with flexible-array member There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

2020-10-27 00:54:08 -05:00

Bluetooth: btintel: Add infrastructure to read controller information New generation Intel controllers returns version information in TLV format. This patch adds, 1) Enums, structures for TLV 2) function to read controller information, parse TLV data and populate intel_version_tlv structure 3) function to print version information Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2020-09-14 18:55:05 +05:30

Bluetooth: btintel: Define a macro for Intel Reset vendor command Use macro for Intel Reset command (0xfc01) instead of hard coded value. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2025-07-11 15:37:25 +05:30

Bluetooth: btintel_pcie: Add support for smart trigger dump Based on the debug configuration, firmware can raise MSI-X interrupt with firmware trigger cause bit set on specific events like Disconnection, Connection Timeout, Page Timeout etc. Upon receiving an MSI-X interrupt with the firmware trigger cause bit set, the driver performs the following actions: 1. Reads Device Memory: Retrieves data from the device memory, constructs an HCI diagnostic event, and sends it to the monitor. This event includes details about the trigger, such as connection timeout or page timeout. 2. Dumps Device Coredump: Generates a coredump containing firmware traces for further analysis. The coredump can be retrieved using: $ cat /sys/class/devcoredump/devcd*/data > /tmp/btintel_coredump.bin HCI traces: = Vendor Diagnostic (len 12) a5 a5 a5 a5 01 03 00 23 00 01 00 00 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-06-03 21:24:15 +05:30

Bluetooth: btintel: Define a macro for Intel Reset vendor command Use macro for Intel Reset command (0xfc01) instead of hard coded value. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2025-07-11 15:37:25 +05:30

Bluetooth: btintel_pcie: Add support for exception dump for ScP2 Add device coredump support for Scorpious Peak2 product. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-02-28 14:42:35 +05:30

Bluetooth: btintel_pcie: Add support for exception dump for ScP2F Add device coredump support for Scorpious Peak2F product. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-02-28 14:42:37 +05:30

Bluetooth: btintel: Add support to download intermediate loader Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before downloading operational firmware image. dmesg logs: [13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth: ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919] Bluetooth: HCI device and connection manager initialized [13.422923] Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0 [13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [13.565148] Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth: hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0: Boot Address: 0x10000800 [13.569062] Bluetooth: hci0: Firmware Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast [13.788902] Bluetooth: BNEP socket layer initialized [15.435905] Bluetooth: hci0: Waiting for firmware download to complete [15.436016] Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258] Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth: hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth: hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth: hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299] Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381] Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595 [15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243] Bluetooth: hci0: Fseq status: Success (0x00) [15.483246] Bluetooth: hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682] Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-03-11 14:16:26 +05:30

Bluetooth: btintel: Add support to configure TX power BRDS - Bluetooth Regulatory Domain Specific absorption rate Bluetooth has regulatory limitations which prohibit or allow usage of certain bands or channels as well as limiting Tx power. The Tx power values can be configured in ACPI table. This patch reads from ACPI entry configures the controller accordingly. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2025-03-07 16:30:11 +05:30

Bluetooth: btintel: Add Bluetooth SAR revision 2 support BRDS revision 2 introduces per-chain (Chain A and Chain B) TX power limits across five sub-bands (2.4G, 5.2G, 5.8/5.9G, 6G-low, 6G-high), replacing the single-chain per-modulation model of revisions 0 and 1. - Add btintel_set_sar_rev2() which sends the full Rev2 DDC sequence: 0x019e inc-power-mode enable flag (1 byte) 0x0311 2.4 GHz sub-band limits (2 bytes) 0x0312 5.2 GHz sub-band limits (2 bytes) 0x0313 5.8/5.9 GHz sub-band limits (2 bytes) 0x0314 5.8/5.9 GHz sub-band limits again (2 bytes, duplicate FW reg) 0x0315 6 GHz low sub-band limits (2 bytes) 0x0316 6 GHz high sub-band limits (2 bytes) followed by the SAR-init-complete command (0xfe25). logs from dmesg when BTSAR2 is enabled in Coreboot/BIOS: Bluetooth: hci0: BT SAR Rev2: revision=2 bt_sar_bios=1 inc_power_mode=1 Bluetooth: hci0: BT SAR Rev2 Chain A: 2g4=76 5g2=0 5g8_5g9=0 6g1=0 6g3=0 Bluetooth: hci0: BT SAR Rev2 Chain B: 2g4=102 5g2=0 5g8_5g9=0 6g1=0 6g3=0 Signed-off-by: Ravindra <ravindra@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-07-23 06:43:32 +05:30

Bluetooth: btintel: Add support to configure TX power BRDS - Bluetooth Regulatory Domain Specific absorption rate Bluetooth has regulatory limitations which prohibit or allow usage of certain bands or channels as well as limiting Tx power. The Tx power values can be configured in ACPI table. This patch reads from ACPI entry configures the controller accordingly. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2025-03-07 16:30:11 +05:30

Bluetooth: btintel: Define macros for image types Use macro for image type instead of using hard code number. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-03-11 14:16:25 +05:30

Bluetooth: btintel: Add support to download intermediate loader Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before downloading operational firmware image. dmesg logs: [13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth: ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919] Bluetooth: HCI device and connection manager initialized [13.422923] Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0 [13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [13.565148] Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth: hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0: Boot Address: 0x10000800 [13.569062] Bluetooth: hci0: Firmware Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast [13.788902] Bluetooth: BNEP socket layer initialized [15.435905] Bluetooth: hci0: Waiting for firmware download to complete [15.436016] Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258] Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth: hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth: hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth: hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299] Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381] Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595 [15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243] Bluetooth: hci0: Fseq status: Success (0x00) [15.483246] Bluetooth: hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682] Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-03-11 14:16:26 +05:30

Bluetooth: btintel: Define macros for image types Use macro for image type instead of using hard code number. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-03-11 14:16:25 +05:30

2024-06-19 15:39:33 +05:30

Bluetooth: btintel: Replace CNVi id with hardware variant Use hardware variant instead of CNVi to send dsbr command. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-02-28 14:42:32 +05:30

Bluetooth: btintel: Add DSBR support for ScP2 onwards Add DSBR support for Scorpious Peak2 cores onwards. Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-02-28 14:42:34 +05:30

Bluetooth: btintel_pcie: Load IOSF debug regs by controller variant Load the IOSF DBGC base address based on the controller hardware variant when reading DRAM buffers during a trace dump. Scorpius Peak family controllers (SCP/SCP2/SCP2F) use a different DBGC base address (0xf0d5d500) than Blazar family controllers (BZRI/BZRIW, 0xf3800300). Fixes: 07e6bddb54b4 ("Bluetooth: btintel_pcie: Add support for device coredump") Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-06-07 11:51:17 +05:30

Bluetooth: btintel: Replace CNVi id with hardware variant Use hardware variant instead of CNVi to send dsbr command. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-02-28 14:42:32 +05:30

Bluetooth: btintel_pcie: Support Product level reset When driver encounters a TOP exception, ACPI methods will be called for Product level reset since Wifi and BT share the same TOP. BT driver will first reprobe the wifi driver and then reprobe BT. Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-04-13 09:50:40 +05:30

Bluetooth: btintel: Add infrastructure to read controller information New generation Intel controllers returns version information in TLV format. This patch adds, 1) Enums, structures for TLV 2) function to read controller information, parse TLV data and populate intel_version_tlv structure 3) function to print version information Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2020-09-14 18:55:05 +05:30

Bluetooth: btintel: Print firmware SHA1 Intel Read Version event contains a TLV(0x32) having firmware sha1 in operational image. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-11-27 10:12:02 +05:30

2024-06-19 15:39:33 +05:30

Bluetooth: btintel: Add infrastructure to read controller information New generation Intel controllers returns version information in TLV format. This patch adds, 1) Enums, structures for TLV 2) function to read controller information, parse TLV data and populate intel_version_tlv structure 3) function to print version information Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2020-09-14 18:55:05 +05:30

Bluetooth: btusb: Move Intel command structs into its own header Since the Intel Bluetooth support has its own header, it makes sense to move all command structs into it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-06 00:52:13 -07:00

Bluetooth: btusb: Use proper data structures for Intel vendor events The Intel vendors events indicating firmware loading result and the bootup of the operational firmware are currently hardcoded byte comparisons. So intead of doing that, provide proper data structures and actually use them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-09 00:35:19 -07:00

Bluetooth: btintel: Create common function for Intel Reset The Intel_Reset command is used to reset the device after downloading the firmware and this is Intel generic command used in both USB and UART. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2018-01-24 09:19:18 -08:00

Bluetooth: btusb: Add support to read Intel debug feature The command shall read the Intel controller supported debug feature. Based on the supported features additional debug configuration shall be enabled. Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Ps AyappadasX <AyappadasX.Ps@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2020-06-08 17:57:46 +05:30

Bluetooth: btintel: Read supported offload use cases Read offload use cases supported by controller. Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2021-09-07 15:42:39 +05:30

Bluetooth: btintel: Send new command for PPAG Added support for the new command opcode FE0B (HCI Intel PPAG Enable). btmon log: < HCI Command: Intel PPAG Enable (0x3f|0x020b) plen 4 Enable: 0x00000002 > HCI Event: Command Complete (0x0e) plen 4 Intel PPAG Enable (0x3f|0x020b) ncmd 1 Status: Success (0x00) Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-08-17 17:12:50 +05:30

Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG) Antenna gain is defined as the antenna’s ability to increase the Tx power in a given direction. Intel is certifying its products with fixed reference antenna peak gain values (3/5dBi). The feature takes into account the actual antenna gain, and increases output power values, which results in a performance improvement. After firmware download is completed, driver reads from ACPI table and configures PPAG as required. ACPI table entry for PPAG is defined as below. Name (PPAG, Package (0x02) { 0x00000001, Package (0x02) { 0x00000012, /* Bluetooth Domain */ 0x00000001 /* 1 - Enable PPAG, 0 - Disable PPAG */ } }) btmon log: < HCI Command: Intel Configure Per Platform Antenna Gain (0x3f|0x0219) plen 12 Mcc: 0x00000000 Selector: Enable Delta: 0x00000000 > HCI Event: Command Complete (0x0e) plen 4 Intel Configure Per Platform Antenna Gain (0x3f|0x0219) ncmd 1 Status: Success (0x00) Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-02-06 12:21:44 +05:30

Bluetooth: btintel: Add Intel devcoredump support Intercept debug exception events from the controller and put them into a devcoredump using hci devcoredump APIs. The debug exception contains data in a TLV format and it will be parsed in userspace. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Chethan Tumkur Narayan <chethan.tumkur.narayan@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-03-30 09:58:26 -07:00

Bluetooth: btintel: Add support to configure TX power BRDS - Bluetooth Regulatory Domain Specific absorption rate Bluetooth has regulatory limitations which prohibit or allow usage of certain bands or channels as well as limiting Tx power. The Tx power values can be configured in ACPI table. This patch reads from ACPI entry configures the controller accordingly. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2025-03-07 16:30:11 +05:30

Bluetooth: btintel: Add Bluetooth SAR revision 2 support BRDS revision 2 introduces per-chain (Chain A and Chain B) TX power limits across five sub-bands (2.4G, 5.2G, 5.8/5.9G, 6G-low, 6G-high), replacing the single-chain per-modulation model of revisions 0 and 1. - Add btintel_set_sar_rev2() which sends the full Rev2 DDC sequence: 0x019e inc-power-mode enable flag (1 byte) 0x0311 2.4 GHz sub-band limits (2 bytes) 0x0312 5.2 GHz sub-band limits (2 bytes) 0x0313 5.8/5.9 GHz sub-band limits (2 bytes) 0x0314 5.8/5.9 GHz sub-band limits again (2 bytes, duplicate FW reg) 0x0315 6 GHz low sub-band limits (2 bytes) 0x0316 6 GHz high sub-band limits (2 bytes) followed by the SAR-init-complete command (0xfe25). logs from dmesg when BTSAR2 is enabled in Coreboot/BIOS: Bluetooth: hci0: BT SAR Rev2: revision=2 bt_sar_bios=1 inc_power_mode=1 Bluetooth: hci0: BT SAR Rev2 Chain A: 2g4=76 5g2=0 5g8_5g9=0 6g1=0 6g3=0 Bluetooth: hci0: BT SAR Rev2 Chain B: 2g4=102 5g2=0 5g8_5g9=0 6g1=0 6g3=0 Signed-off-by: Ravindra <ravindra@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-07-23 06:43:32 +05:30

Bluetooth: btusb: Define a function to construct firmware filename Define a new function to construct firmware/ddc filename for new generation Intel controllers Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2020-11-19 17:09:41 +05:30

Bluetooth: btintel: Add btintel data struct This patch adds a data structure for btintel for btintel object, and the definition of bootloder states. It also adds macros to set/test/clear the flags. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-08-04 17:32:11 -07:00

Bluetooth: btintel: Fix the first HCI command not work with ROM device The some legacy ROM controllers have a bug with the first HCI command sent to it returning number of completed commands as zero, which would stall the command processing in the Bluetooth core. As a workaround, send HCI Rest command first which will reset the controller to fix the issue. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-08-04 17:32:12 -07:00

Bluetooth: btintel: Fix broken LED quirk for legacy ROM devices This patch fixes the broken LED quirk for Intel legacy ROM devices. To fix the LED issue that doesn't turn off immediately, the host sends the SW RFKILL command while shutting down the interface and it puts the devices in SW RFKILL state. Once the device is in SW RFKILL state, it can only accept HCI_Reset to exit from the SW RFKILL state. This patch checks the quirk for broken LED and sends the HCI_Reset before sending the HCI_Intel_Read_Version command. The affected legacy ROM devices are - 8087:07dc - 8087:0a2a - 8087:0aa7 Fixes: ffcba827c0a1d ("Bluetooth: btintel: Fix the LED is not turning off immediately") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2022-01-06 16:34:54 -08:00

Bluetooth: btintel: Add combined set_diag functions This patch adds a combined set_diag functions. It also changes the btintel_set_diag_mfg() to static since it is no longer used by others. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-08-04 17:32:14 -07:00

Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products This patch adds the flag to identify the Intel legacy ROM products that don't support WBS like WP and StP. Fixes: 3df4dfbec0f29 ("Bluetooth: btintel: Move hci quirks to setup routine") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2022-01-20 11:44:18 -08:00

Bluetooth: btintel: Add support to reset bluetooth via ACPI DSM New Intel platforms supports reset of Bluetooth device via ACPI DSM methods. The legacy reset mechanism via GPIO will be deprecated in future. This patch checks the platform support for reset methods and if supported uses the same instead of legacy GPIO toggling method. ACPI firmware supports two types of reset method based on NIC card. (Discrete or Integrated). 1. VSEC Type - Vendor Specific Extended Capability. Here BT_EN and BT_IF_SELECT lines are driven by a register in PCH cluster. This interface is supported on discrete BT solution. 2. WDISABLE2 - In this soluton, W_DISABLE2 pin in M.2 is connected to physical GPIO from PCH. The DSM interface shall toggle this to recover from error. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-06-11 12:13:42 +05:30

Bluetooth: btintel_pcie: Add handshake between driver and firmware The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option #1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept #5 and #6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-10-01 16:14:50 +05:30

Bluetooth: btintel: Add btintel data struct This patch adds a data structure for btintel for btintel object, and the definition of bootloder states. It also adds macros to set/test/clear the flags. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-08-04 17:32:11 -07:00

Bluetooth: btintel: Add support to reset bluetooth via ACPI DSM New Intel platforms supports reset of Bluetooth device via ACPI DSM methods. The legacy reset mechanism via GPIO will be deprecated in future. This patch checks the platform support for reset methods and if supported uses the same instead of legacy GPIO toggling method. ACPI firmware supports two types of reset method based on NIC card. (Discrete or Integrated). 1. VSEC Type - Vendor Specific Extended Capability. Here BT_EN and BT_IF_SELECT lines are driven by a register in PCH cluster. This interface is supported on discrete BT solution. 2. WDISABLE2 - In this soluton, W_DISABLE2 pin in M.2 is connected to physical GPIO from PCH. The DSM interface shall toggle this to recover from error. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-06-11 12:13:42 +05:30

Bluetooth: btintel: Add btintel data struct This patch adds a data structure for btintel for btintel object, and the definition of bootloder states. It also adds macros to set/test/clear the flags. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-08-04 17:32:11 -07:00

Bluetooth: btintel_pcie: Add support for PCIe transport Add initial code to support Intel bluetooth devices based on PCIe transport. Allocate memory for TX & RX buffers, internal structures, initialize interrupts for TX & RX and PCIe device. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-05-07 21:26:57 +05:30

Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-06 00:52:11 -07:00

Bluetooth: btintel: Add manufacturing enter/exit helpers Older Intel controllers need to enter manufacturing mode to perform some vendor specific operations (patching, configuration...). Add enter/exit manufaturing methods and refactor existing manufacturing code. Exit can be configured to perform a reset. Reset can be performed either with patches activated or deactivated. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2015-12-03 16:10:22 +01:00

Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-06 00:52:11 -07:00

Bluetooth: btintel: Add support for enabling tracing functionality For Intel controllers with firmware that allows tracing of baseband functionality this allows enabling it via set_diag driver callback. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-10-09 14:42:08 +02:00

Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-06 00:52:11 -07:00

Bluetooth: btintel: Consolidate intel_version parsing This moves version checks of intel_version() to btintel_version_info(). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-03-23 11:58:59 -07:00

Bluetooth: btintel: Add Device Configuration support btintel_load_ddc_config retrieves the ddc file and sends its content via DDC commands (opcode 0xfc8b). The ddc file should contain one or more DDC structures. A DDC structure is composed of the folowing fields: field: | DDC LEN | DDC ID | DDC VALUE | size: | 1 byte | 2 bytes | DDC LEN - 2 | Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2015-09-04 17:54:34 +02:00

Bluetooth: btintel: Enable extra Intel vendor events The Intel Bluetooth controllers can emit extra vendor specific events in error conditions or for debugging purposes. To make the life easier for engineers, enable them by default. When the vendor_diag options has been enabled, then additional debug events are also enabled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-10-21 02:45:19 +02:00

Bluetooth: btintel: Create common Intel Version Read function The Intel Version Read command is used to retrieve information about hardware and firmware version/revision of Intel Bluetooth controllers. This is an Intel generic command used in USB and UART drivers. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2015-12-06 16:18:34 +01:00

Bluetooth: btintel: Add iBT register access over HCI support Add regmap ibt to support Intel Bluetooth silicon register access over HCI. Intel BT/FM combo chip allows to read/write some registers (e.g. FM registers) via its HCI interface. Read/Write operations are performed via a HCI transaction composed of a HCI command (host->controller) followed by a HCI command complete event (controller->host). Read/Write Command opcodes can be specified to the regmap init function. We define data formats which are intel/vendor specific. Register Read/Write HCI command payload (Host): Field: | REG ADDR | MODE | DATA_LEN | DATA... | size: | 32b | 8b | 8b | 8b* | Register Read HCI command complete event payload (Controller): Field: | CMD STATUS | REG ADDR | DATA... | size: | 8b | 32b | 8b* | Register Write HCI command complete event payload (Controller): Field: | CMD_STATUS | size: | 8b | Since this payload is HCI encapsulated, Little Endian byte order is used. Write/Read Example: If we write 0x0000002a at address 0x00008c04, with opcode_write 0xfc5d, The resulting transaction is (btmon trace): < HCI Command (0x3f|0x005d) plen 10 [hci0] 04 8c 00 00 02 04 2a 00 00 00 > HCI Event (0x0e) plen 4 Unknown (0x3f|0x005d) ncmd 1 00 Then, if we read the same register with opcode_read 0xfc5e: < HCI Command (0x3f|0x005e) plen 6 [hci0] 04 8c 00 00 02 04 > HCI Event (0x0e) plen 12 [hci0] Unknown (0x3f|0x005e) ncmd 1 00 04 8c 00 00 2a 00 00 00 Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2015-10-01 18:16:21 +02:00

Bluetooth: btintel: Create common function for Intel Reset The Intel_Reset command is used to reset the device after downloading the firmware and this is Intel generic command used in both USB and UART. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2018-01-24 09:19:18 -08:00

Bluetooth: btintel: Create common Intel Read Boot Params function The Intel_Read_Boot_Params command is used to read boot parameters from the bootloader and this is Intel generic command used in USB and UART drivers. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2018-01-24 09:19:20 -08:00

Bluetooth: btintel: Check firmware version before download This checks the firmware build number, week and year against the repective loaded version. If details are a match, skip the download process. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-03-23 11:58:56 -07:00

Bluetooth: btintel: Add Intel devcoredump support Intercept debug exception events from the controller and put them into a devcoredump using hci devcoredump APIs. The debug exception contains data in a TLV format and it will be parsed in userspace. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Chethan Tumkur Narayan <chethan.tumkur.narayan@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-03-30 09:58:26 -07:00

Bluetooth: btusb: Move btusb_recv_event_intel to btintel btusb_recv_event_intel is specific to Intel controllers therefore it shall be placed inside btintel.c so btusb don't have a mix of vendor specific code with the generic parts. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-07-20 15:16:32 -07:00

Bluetooth: btintel: Refactoring setup routine for bootloader devices This patch refactors the setup routines for legacy and TLV based bootloader devices to the combined setup, and move the related functions from btusb to btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-08-04 17:32:15 -07:00

Bluetooth: set quality report callback for Intel This patch sets up set_quality_report callback for Intel to set and reset the debug features. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2021-08-15 20:17:17 +08:00

Bluetooth: btintel: Export few static functions Some of the functions used in btintel.c is made global so that they can be reused in other transport drivers apart from USB. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-05-07 21:26:56 +05:30

Bluetooth: btintel_pcie: Print Firmware Sequencer information Firmware sequencer (FSEQ) is a common code shared across Bluetooth and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ. Make 'btintel_print_fseq_info' public and use it in btintel_pcie.c. dmesg: .... [ 5335.695740] Bluetooth: hci0: Device booted in 33872 usecs [ 5335.695918] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291.ddc [ 5335.697011] Bluetooth: hci0: Applying Intel DDC parameters completed [ 5335.697837] Bluetooth: hci0: Firmware timestamp 2024.20 buildtype 0 build 62871 [ 5335.697848] Bluetooth: hci0: Firmware SHA1: 0xeffdce06 [ 5335.698655] Bluetooth: hci0: Fseq status: Success (0x00) [ 5335.698666] Bluetooth: hci0: Fseq executed: 00.00.04.176 [ 5335.698670] Bluetooth: hci0: Fseq BT Top: 00.00.04.176 [ 5335.750204] Bluetooth: MGMT ver 1.22 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-05-17 15:24:45 +05:30

Bluetooth: btintel_pcie: Support Product level reset When driver encounters a TOP exception, ACPI methods will be called for Product level reset since Wifi and BT share the same TOP. BT driver will first reprobe the wifi driver and then reprobe BT. Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-04-13 09:50:40 +05:30

Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-06 00:52:11 -07:00

Bluetooth: btintel: Add manufacturing enter/exit helpers Older Intel controllers need to enter manufacturing mode to perform some vendor specific operations (patching, configuration...). Add enter/exit manufaturing methods and refactor existing manufacturing code. Exit can be configured to perform a reset. Reset can be performed either with patches activated or deactivated. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2015-12-03 16:10:22 +01:00

Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-06 00:52:11 -07:00

Bluetooth: btintel: Add support for enabling tracing functionality For Intel controllers with firmware that allows tracing of baseband functionality this allows enabling it via set_diag driver callback. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-10-09 14:42:08 +02:00

Bluetooth: btintel: Consolidate intel_version parsing This moves version checks of intel_version() to btintel_version_info(). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-03-23 11:58:59 -07:00

Bluetooth: btintel: Create common function for Intel version info The Intel version information is shared between USB and UART drivers and with that move it into a generic function of the Intel module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-07-05 15:02:07 +02:00

Bluetooth: btintel: Consolidate intel_version parsing This moves version checks of intel_version() to btintel_version_info(). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-03-23 11:58:59 -07:00

Bluetooth: btintel: Create common function for Intel version info The Intel version information is shared between USB and UART drivers and with that move it into a generic function of the Intel module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-07-05 15:02:07 +02:00

Bluetooth: btintel: Add Device Configuration support btintel_load_ddc_config retrieves the ddc file and sends its content via DDC commands (opcode 0xfc8b). The ddc file should contain one or more DDC structures. A DDC structure is composed of the folowing fields: field: | DDC LEN | DDC ID | DDC VALUE | size: | 1 byte | 2 bytes | DDC LEN - 2 | Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2015-09-04 17:54:34 +02:00

Bluetooth: btintel: Enable extra Intel vendor events The Intel Bluetooth controllers can emit extra vendor specific events in error conditions or for debugging purposes. To make the life easier for engineers, enable them by default. When the vendor_diag options has been enabled, then additional debug events are also enabled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-10-21 02:45:19 +02:00

Bluetooth: btintel: Create common Intel Version Read function The Intel Version Read command is used to retrieve information about hardware and firmware version/revision of Intel Bluetooth controllers. This is an Intel generic command used in USB and UART drivers. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2015-12-06 16:18:34 +01:00

Bluetooth: btintel: Add iBT register access over HCI support Add regmap ibt to support Intel Bluetooth silicon register access over HCI. Intel BT/FM combo chip allows to read/write some registers (e.g. FM registers) via its HCI interface. Read/Write operations are performed via a HCI transaction composed of a HCI command (host->controller) followed by a HCI command complete event (controller->host). Read/Write Command opcodes can be specified to the regmap init function. We define data formats which are intel/vendor specific. Register Read/Write HCI command payload (Host): Field: | REG ADDR | MODE | DATA_LEN | DATA... | size: | 32b | 8b | 8b | 8b* | Register Read HCI command complete event payload (Controller): Field: | CMD STATUS | REG ADDR | DATA... | size: | 8b | 32b | 8b* | Register Write HCI command complete event payload (Controller): Field: | CMD_STATUS | size: | 8b | Since this payload is HCI encapsulated, Little Endian byte order is used. Write/Read Example: If we write 0x0000002a at address 0x00008c04, with opcode_write 0xfc5d, The resulting transaction is (btmon trace): < HCI Command (0x3f|0x005d) plen 10 [hci0] 04 8c 00 00 02 04 2a 00 00 00 > HCI Event (0x0e) plen 4 Unknown (0x3f|0x005d) ncmd 1 00 Then, if we read the same register with opcode_read 0xfc5e: < HCI Command (0x3f|0x005e) plen 6 [hci0] 04 8c 00 00 02 04 > HCI Event (0x0e) plen 12 [hci0] Unknown (0x3f|0x005e) ncmd 1 00 04 8c 00 00 2a 00 00 00 Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2015-10-01 18:16:21 +02:00

Bluetooth: btintel: Create common function for Intel Reset The Intel_Reset command is used to reset the device after downloading the firmware and this is Intel generic command used in both USB and UART. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2018-01-24 09:19:18 -08:00

Bluetooth: btintel: Create common Intel Read Boot Params function The Intel_Read_Boot_Params command is used to read boot parameters from the bootloader and this is Intel generic command used in USB and UART drivers. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2018-01-24 09:19:20 -08:00

Bluetooth: btintel: Create common function for firmware download The firmware download flow for RAM SKU is same for both USB and UART and this patch creates a common function for both driver. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2018-01-24 09:19:21 -08:00

Bluetooth: btusb: Trigger Intel FW download error recovery Sometimes during FW data download stage, in case of an error is encountered the controller device could not be recovered. To recover from such failures send Intel hard Reset to re-trigger FW download in following error scenarios: 1. Intel Read version command error 2. Firmware download timeout 3. Failure in Intel Soft Reset for switching to operational FW 4. Boot timeout for switching to operaional FW Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2019-10-17 13:52:29 +05:30

Bluetooth: btintel: Add Intel devcoredump support Intercept debug exception events from the controller and put them into a devcoredump using hci devcoredump APIs. The debug exception contains data in a TLV format and it will be parsed in userspace. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Chethan Tumkur Narayan <chethan.tumkur.narayan@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2023-03-30 09:58:26 -07:00

Bluetooth: btintel: Add combined setup and shutdown functions There are multiple setup and shutdown functions for Intel device and the setup function to be used is depends on the USB PID/VID, which makes difficult to maintain the code and increases the code size. This patch adds combined setup and shutdown functions to provide a single entry point for all Intel devices and choose the setup functions based on the information read with HCI_Intel_Read_Version command. Starting from TyP device, the command and response parameters for HCI_Intel_Read_Version command are changed even though OCF remains same. However, the legacy devices still can handle the command without error even if it has a extra parameter, so to simplify the flow, the new command format is used to read the version information for both legacy and new (tlv based) format. Also, it also adds a routine to setup the hdev callbacks in btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-08-04 17:32:09 -07:00

Bluetooth: btintel: Refactoring setup routine for bootloader devices This patch refactors the setup routines for legacy and TLV based bootloader devices to the combined setup, and move the related functions from btusb to btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2021-08-04 17:32:15 -07:00

Bluetooth: set quality report callback for Intel This patch sets up set_quality_report callback for Intel to set and reset the debug features. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2021-08-15 20:17:17 +08:00

Bluetooth: btintel: Export few static functions Some of the functions used in btintel.c is made global so that they can be reused in other transport drivers apart from USB. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-05-07 21:26:56 +05:30

Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Fix the following compiler warning reported for ARCH=arm multi_v7_defconfig. In file included from drivers/bluetooth/hci_ldisc.c:34: drivers/bluetooth/btintel.h:373:13: warning: 'btintel_hw_error' defined but not used [-Wunused-function] 373 | static void btintel_hw_error(struct hci_dev *hdev, u8 code) | ^~~~~~~~~~~~~~~~ cc: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 67d4dbac3b8c ("Bluetooth: btintel: Export few static functions") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-05-08 15:29:27 +05:30

Bluetooth: btintel: Export few static functions Some of the functions used in btintel.c is made global so that they can be reused in other transport drivers apart from USB. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-05-07 21:26:56 +05:30

Bluetooth: btintel_pcie: Print Firmware Sequencer information Firmware sequencer (FSEQ) is a common code shared across Bluetooth and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ. Make 'btintel_print_fseq_info' public and use it in btintel_pcie.c. dmesg: .... [ 5335.695740] Bluetooth: hci0: Device booted in 33872 usecs [ 5335.695918] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291.ddc [ 5335.697011] Bluetooth: hci0: Applying Intel DDC parameters completed [ 5335.697837] Bluetooth: hci0: Firmware timestamp 2024.20 buildtype 0 build 62871 [ 5335.697848] Bluetooth: hci0: Firmware SHA1: 0xeffdce06 [ 5335.698655] Bluetooth: hci0: Fseq status: Success (0x00) [ 5335.698666] Bluetooth: hci0: Fseq executed: 00.00.04.176 [ 5335.698670] Bluetooth: hci0: Fseq BT Top: 00.00.04.176 [ 5335.750204] Bluetooth: MGMT ver 1.22 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2024-05-17 15:24:45 +05:30

Bluetooth: btintel_pcie: Support Product level reset When driver encounters a TOP exception, ACPI methods will be called for Product level reset since Wifi and BT share the same TOP. BT driver will first reprobe the wifi driver and then reprobe BT. Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

2026-04-13 09:50:40 +05:30

Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

2015-04-06 00:52:11 -07:00

452 lines 11 KiB Raw Permalink Normal View History

452 lines

11 KiB

Raw Permalink Normal View History