kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/drivers/clocksource/timer-microchip-pit64b.c

508 lines
14 KiB
Raw Permalink Normal View History

clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add delay timer Add delay timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230203130537.1921608-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-02-03 15:05:37 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Use 5MHz for clockevent Use 5MHz clock for clockevent timers. This increases timer's resolution. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220304133601.2404086-4-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-04 15:35:58 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Fix compilation warnings Fix the following compilation warnings: timer-microchip-pit64b.c:68: warning: cannot understand function prototype: 'struct mchp_pit64b_clkevt ' timer-microchip-pit64b.c:82: warning: cannot understand function prototype: 'struct mchp_pit64b_clksrc ' timer-microchip-pit64b.c:283: warning: Function parameter or member 'timer' not described in 'mchp_pit64b_init_mode' timer-microchip-pit64b.c:283: warning: Function parameter or member 'max_rate' not described in 'mchp_pit64b_init_mode' Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-4-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:41 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Fix compilation warnings Fix the following compilation warnings: timer-microchip-pit64b.c:68: warning: cannot understand function prototype: 'struct mchp_pit64b_clkevt ' timer-microchip-pit64b.c:82: warning: cannot understand function prototype: 'struct mchp_pit64b_clksrc ' timer-microchip-pit64b.c:283: warning: Function parameter or member 'timer' not described in 'mchp_pit64b_init_mode' timer-microchip-pit64b.c:283: warning: Function parameter or member 'max_rate' not described in 'mchp_pit64b_init_mode' Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-4-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:41 +03:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add delay timer Add delay timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230203130537.1921608-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-02-03 15:05:37 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Use notrace Use notrace for mchp_pit64b_sched_read_clk() to avoid recursive call of prepare_ftrace_return() when issuing: echo function_graph > /sys/kernel/debug/tracing/current_tracer Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220304133601.2404086-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-04 15:35:57 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add delay timer Add delay timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230203130537.1921608-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-02-03 15:05:37 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce Remove suspend and resume ops for clockevent and add set_state_oneshot() instead. Along with this mchp_pit64b_{suspend, resume}() were called on proper function to disable/enable clocks. This will allow disabling clocks for clockevent in case it is not selected as active clockevent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-2-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:39 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce Remove suspend and resume ops for clockevent and add set_state_oneshot() instead. Along with this mchp_pit64b_{suspend, resume}() were called on proper function to disable/enable clocks. This will allow disabling clocks for clockevent in case it is not selected as active clockevent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-2-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:39 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce Remove suspend and resume ops for clockevent and add set_state_oneshot() instead. Along with this mchp_pit64b_{suspend, resume}() were called on proper function to disable/enable clocks. This will allow disabling clocks for clockevent in case it is not selected as active clockevent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-2-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:39 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
timekeeping, clocksource: Fix various typos in comments Fix ~56 single-word typos in timekeeping & clocksource code comments. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org
2021-03-22 22:39:03 +01:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Fix compilation warnings Fix the following compilation warnings: timer-microchip-pit64b.c:68: warning: cannot understand function prototype: 'struct mchp_pit64b_clkevt ' timer-microchip-pit64b.c:82: warning: cannot understand function prototype: 'struct mchp_pit64b_clksrc ' timer-microchip-pit64b.c:283: warning: Function parameter or member 'timer' not described in 'mchp_pit64b_init_mode' timer-microchip-pit64b.c:283: warning: Function parameter or member 'max_rate' not described in 'mchp_pit64b_init_mode' Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-4-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:41 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning Fix sparse warning: "warning: Using plain integer as NULL pointer" Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578304688-14882-1-git-send-email-claudiu.beznea@microchip.com
2020-01-06 11:58:08 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Fix rate for gck Generic clock rate needs to be set in case it was selected as timer clock source in mchp_pit64b_init_mode(). Otherwise it will be enabled with wrong rate. Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1584352376-32585-1-git-send-email-claudiu.beznea@microchip.com
2020-03-16 11:52:56 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Use mchp_pit64b_{suspend, resume} Use mchp_pit64b_suspend() and mchp_pit64b_resume() to disable or enable timers clocks on init and remove specific clk_prepare_{disable, enable} calls. This is ok also for clockevent timer as proper clock enable, disable is done on .set_state_oneshot, .set_state_periodic, .set_state_shutdown calls. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:40 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Use mchp_pit64b_{suspend, resume} Use mchp_pit64b_suspend() and mchp_pit64b_resume() to disable or enable timers clocks on init and remove specific clk_prepare_{disable, enable} calls. This is ok also for clockevent timer as proper clock enable, disable is done on .set_state_oneshot, .set_state_periodic, .set_state_shutdown calls. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:40 +03:00
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-01-19 14:59:25 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Add delay timer Add delay timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230203130537.1921608-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-02-03 15:05:37 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce Remove suspend and resume ops for clockevent and add set_state_oneshot() instead. Along with this mchp_pit64b_{suspend, resume}() were called on proper function to disable/enable clocks. This will allow disabling clocks for clockevent in case it is not selected as active clockevent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-2-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:39 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning Fix sparse warning: "warning: Using plain integer as NULL pointer" Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578304688-14882-1-git-send-email-claudiu.beznea@microchip.com
2020-01-06 11:58:08 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Use 5MHz for clockevent Use 5MHz clock for clockevent timers. This increases timer's resolution. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220304133601.2404086-4-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-04 15:35:58 +02:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Use mchp_pit64b_{suspend, resume} Use mchp_pit64b_suspend() and mchp_pit64b_resume() to disable or enable timers clocks on init and remove specific clk_prepare_{disable, enable} calls. This is ok also for clockevent timer as proper clock enable, disable is done on .set_state_oneshot, .set_state_periodic, .set_state_shutdown calls. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:40 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Use mchp_pit64b_{suspend, resume} Use mchp_pit64b_suspend() and mchp_pit64b_resume() to disable or enable timers clocks on init and remove specific clk_prepare_{disable, enable} calls. This is ok also for clockevent timer as proper clock enable, disable is done on .set_state_oneshot, .set_state_periodic, .set_state_shutdown calls. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:40 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00
clocksource/drivers/timer-microchip-pit64b: Use mchp_pit64b_{suspend, resume} Use mchp_pit64b_suspend() and mchp_pit64b_resume() to disable or enable timers clocks on init and remove specific clk_prepare_{disable, enable} calls. This is ok also for clockevent timer as proper clock enable, disable is done on .set_state_oneshot, .set_state_periodic, .set_state_shutdown calls. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220609094041.1796372-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-09 12:40:40 +03:00
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2019-12-13 13:19:21 +02:00