kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/drivers/clocksource/timer-ralink.c

157 lines
3.8 KiB
Raw Permalink Normal View History

clocksource/drivers/ralink: Add Ralink System Tick Counter driver System Tick Counter is present on Ralink SoCs RT3352 and MT7620. This driver has been in 'arch/mips/ralink' directory since the beggining of Ralink architecture support. However, it can be moved into a more proper place in 'drivers/clocksource'. Hence add it here adding also support for compile test targets and reducing LOC in architecture code folder. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20241028203643.191268-2-sergio.paracuellos@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-10-28 21:36:43 +01:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
clocksource/drivers/ralink: Add Ralink System Tick Counter driver System Tick Counter is present on Ralink SoCs RT3352 and MT7620. This driver has been in 'arch/mips/ralink' directory since the beggining of Ralink architecture support. However, it can be moved into a more proper place in 'drivers/clocksource'. Hence add it here adding also support for compile test targets and reducing LOC in architecture code folder. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20241028203643.191268-2-sergio.paracuellos@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-10-28 21:36:43 +01:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: Change my email address The old address is no longer valid. Use the my new one instead. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-05 09:57:56 +02:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
clocksource/drivers/ralink: Add Ralink System Tick Counter driver System Tick Counter is present on Ralink SoCs RT3352 and MT7620. This driver has been in 'arch/mips/ralink' directory since the beggining of Ralink architecture support. However, it can be moved into a more proper place in 'drivers/clocksource'. Hence add it here adding also support for compile test targets and reducing LOC in architecture code folder. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20241028203643.191268-2-sergio.paracuellos@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-10-28 21:36:43 +01:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: ralink: Fix invalid tick count The current code adds the delta twice, which is obviously wrong. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11443/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-04 11:50:10 +01:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
clocksource/drivers/ralink: Add Ralink System Tick Counter driver System Tick Counter is present on Ralink SoCs RT3352 and MT7620. This driver has been in 'arch/mips/ralink' directory since the beggining of Ralink architecture support. However, it can be moved into a more proper place in 'drivers/clocksource'. Hence add it here adding also support for compile test targets and reducing LOC in architecture code folder. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20241028203643.191268-2-sergio.paracuellos@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-10-28 21:36:43 +01:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: Replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05 17:27:53 +05:30
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: Replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05 17:27:53 +05:30
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: Replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05 17:27:53 +05:30
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: Replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05 17:27:53 +05:30
MIPS: rt3352: Migrate to new 'set-state' interface Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-06 16:42:03 +05:30
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
clocksource/drivers/ralink: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-07 00:03:49 +02:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
clocksource/drivers/ralink: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-07 00:03:49 +02:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
clocksource/drivers/ralink: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-07 00:03:49 +02:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: clockevent drivers: Set ->min_delta_ticks and ->max_delta_ticks In preparation for making the clockevents core NTP correction aware, all clockevent device drivers must set ->min_delta_ticks and ->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a clockevent device's rate is going to change dynamically and thus, the ratio of ns to ticks ceases to stay invariant. Make the MIPS arch's clockevent drivers initialize these fields properly. This patch alone doesn't introduce any change in functionality as the clockevents core still looks exclusively at the (untouched) ->min_delta_ns and ->max_delta_ns. As soon as this has changed, a followup patch will purge the initialization of ->min_delta_ns and ->max_delta_ns from these drivers. Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: John Crispin <john@phrozen.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-03-30 21:47:32 +02:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: clockevent drivers: Set ->min_delta_ticks and ->max_delta_ticks In preparation for making the clockevents core NTP correction aware, all clockevent device drivers must set ->min_delta_ticks and ->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a clockevent device's rate is going to change dynamically and thus, the ratio of ns to ticks ceases to stay invariant. Make the MIPS arch's clockevent drivers initialize these fields properly. This patch alone doesn't introduce any change in functionality as the clockevents core still looks exclusively at the (untouched) ->min_delta_ns and ->max_delta_ns. As soon as this has changed, a followup patch will purge the initialization of ->min_delta_ns and ->max_delta_ns from these drivers. Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: John Crispin <john@phrozen.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-03-30 21:47:32 +02:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20315/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
2018-08-27 20:52:05 -05:00
clocksource/drivers/ralink: Fix resource leaks in init error path The ralink_systick_init() function does not release all acquired resources on its error paths. If irq_of_parse_and_map() or a subsequent call fails, the previously created I/O memory mapping and IRQ mapping are leaked. Add goto-based error handling labels to ensure that all allocated resources are correctly freed. Fixes: 1f2acc5a8a0a ("MIPS: ralink: Add support for systick timer found on newer ralink SoC") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://patch.msgid.link/20251030090710.1603-1-vulab@iscas.ac.cn
2025-10-30 17:07:10 +08:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
clocksource/drivers/ralink: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-07 00:03:49 +02:00
clocksource/drivers/ralink: Fix resource leaks in init error path The ralink_systick_init() function does not release all acquired resources on its error paths. If irq_of_parse_and_map() or a subsequent call fails, the previously created I/O memory mapping and IRQ mapping are leaked. Add goto-based error handling labels to ensure that all allocated resources are correctly freed. Fixes: 1f2acc5a8a0a ("MIPS: ralink: Add support for systick timer found on newer ralink SoC") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://patch.msgid.link/20251030090710.1603-1-vulab@iscas.ac.cn
2025-10-30 17:07:10 +08:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
MIPS: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20315/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
2018-08-27 20:52:05 -05:00
clocksource/drivers/ralink: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-07 00:03:49 +02:00
clocksource/drivers/ralink: Fix resource leaks in init error path The ralink_systick_init() function does not release all acquired resources on its error paths. If irq_of_parse_and_map() or a subsequent call fails, the previously created I/O memory mapping and IRQ mapping are leaked. Add goto-based error handling labels to ensure that all allocated resources are correctly freed. Fixes: 1f2acc5a8a0a ("MIPS: ralink: Add support for systick timer found on newer ralink SoC") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://patch.msgid.link/20251030090710.1603-1-vulab@iscas.ac.cn
2025-10-30 17:07:10 +08:00
MIPS: ralink: Add support for systick timer found on newer ralink SoC Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-08 13:08:06 +02:00
clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-26 16:56:11 +02:00