kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/drivers/md/dm-crypt.c

3727 lines
98 KiB
Raw Permalink Normal View History

dm: add missing SPDX-License-Indentifiers 'GPL-2.0-only' is used instead of 'GPL-2.0' because SPDX has deprecated its use. Suggested-by: John Wiele <jwiele@redhat.com> Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:00:44 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt, dm zero: update author name following legal name change Signed-off-by: Jana Saout <jana@saout.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-06-24 14:27:04 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add completion for async dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:09 +00:00
[BLOCK] dm-crypt: Use block ciphers where applicable This patch converts dm-crypt to use the new block cipher type where applicable. It also changes simple cipher operations to use the new encrypt_one/decrypt_one interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 20:29:17 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kernel.h: drop hex.h and update all hex.h users Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of hex.h interfaces to directly #include <linux/hex.h> as part of the process of putting kernel.h on a diet. Removing hex.h from kernel.h means that 36K C source files don't have to pay the price of parsing hex.h for the roughly 120 C source files that need it. This change has been build-tested with allmodconfig on most ARCHes. Also, all users/callers of <linux/hex.h> in the entire source tree have been updated if needed (if not already #included). Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-14 16:51:56 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: move integrity handling out of <linux/blkdev.h> Split the integrity/metadata handling definitions out into a new header. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-20 14:33:27 +02:00
dm-crypt: switch to using the crc32 library Now that the crc32() library function takes advantage of architecture-specific optimizations, it is unnecessary to go through the crypto API. Just use crc32(). This is much simpler, and it improves performance due to eliminating the crypto API overhead. (However, this only affects the TCW IV mode of dm-crypt, which is a compatibility mode that is rarely used compared to other dm-crypt modes.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-27 14:15:33 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
[PATCH] separate bdi congestion functions from queue congestion functions Separate out the concept of "queue congestion" from "backing-dev congestion". Congestion is a backing-dev concept, not a queue concept. The blk_* congestion functions are retained, as wrappers around the core backing-dev congestion functions. This proper layering is needed so that NFS can cleanly use the congestion functions, and so that CONFIG_BLOCK=n actually links. Cc: "Thomas Maier" <balagi@justmail.de> Cc: "Jens Axboe" <jens.axboe@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: David Howells <dhowells@redhat.com> Cc: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-19 23:28:16 -07:00
atomic: use <linux/atomic.h> This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:09:06 -07:00
[PATCH] Use sg_set_buf/sg_init_one where applicable This patch uses sg_set_buf/sg_init_one in some places where it was duplicated. Signed-off-by: David Hardeman <david@2gen.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-09-17 17:55:31 +10:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: reject key strings containing whitespace chars Unfortunately key_string may theoretically contain whitespace even after it's processed by dm_split_args(). The reason for this is DM core supports escaping of almost all chars including any whitespace. If userspace passes a key to the kernel in format ":32:logon:my_prefix:my\ key" dm-crypt will look up key "my_prefix:my key" in kernel keyring service. So far everything's fine. Unfortunately if userspace later calls DM_TABLE_STATUS ioctl, it will not receive back expected ":32:logon:my_prefix:my\ key" but the unescaped version instead. Also userpace (most notably cryptsetup) is not ready to parse single target argument containing (even escaped) whitespace chars and any whitespace is simply taken as delimiter of another argument. This effect is mitigated by the fact libdevmapper curently performs double escaping of '\' char. Any user input in format "x\ x" is transformed into "x\\ x" before being passed to the kernel. Nonetheless dm-crypt may be used without libdevmapper. Therefore the near-term solution to this is to reject any key string containing whitespace. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-01 18:20:52 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
move asm/unaligned.h to linux/unaligned.h asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-01 15:35:57 -04:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: Use skcipher and ahash This patch replaces uses of ablkcipher with skcipher, and the long obsolete hash interface with ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-24 21:16:36 +08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should not be relied on by users of the Crypto API. Instead of storing the IV on the stack, allocate it together with the crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-01 16:47:43 +08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: support using trusted keys Commit 27f5411a718c ("dm crypt: support using encrypted keys") extended dm-crypt to allow use of "encrypted" keys along with "user" and "logon". Along the same lines, teach dm-crypt to support "trusted" keys as well. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-22 09:43:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: remove dm header from targets Change #include "dm.h" to #include <linux/device-mapper.h> in all targets. Targets should not need direct access to internal DM structures. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:44:59 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: log aead integrity violations to audit subsystem Since dm-crypt target can be stacked on dm-integrity targets to provide authenticated encryption, integrity violations are recognized here during aead computation. We use the dm-audit submodule to signal those events to user space, too. The construction and destruction of crypt device mappings are also logged as audit events. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-09-04 11:59:30 +02:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add completion for async dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:09 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Convert drivers to immutable biovecs Now that we've got a mechanism for immutable biovecs - bi_iter.bi_bvec_done - we need to convert drivers to use primitives that respect it instead of using the bvec array directly. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: NeilBrown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com
2013-10-11 15:45:43 -07:00
dm-verity, dm-crypt: align "struct bvec_iter" correctly "struct bvec_iter" is defined with the __packed attribute, so it is aligned on a single byte. On X86 (and on other architectures that support unaligned addresses in hardware), "struct bvec_iter" is accessed using the 8-byte and 4-byte memory instructions, however these instructions are less efficient if they operate on unaligned addresses. (on RISC machines that don't have unaligned access in hardware, GCC generates byte-by-byte accesses that are very inefficient - see [1]) This commit reorders the entries in "struct dm_verity_io" and "struct convert_context", so that "struct bvec_iter" is aligned on 8 bytes. [1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-20 19:11:51 +01:00
block: Convert drivers to immutable biovecs Now that we've got a mechanism for immutable biovecs - bi_iter.bi_bvec_done - we need to convert drivers to use primitives that respect it instead of using the bvec array directly. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: NeilBrown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com
2013-10-11 15:45:43 -07:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm-crypt: track tag_offset in convert_context dm-crypt uses tag_offset to index the integrity metadata for each crypt sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE, dm-crypt will try to continue the crypt/decrypt procedure in a kworker. However, it resets tag_offset as zero instead of using the tag_offset related with current sector. It may return unexpected data when using random IV or return unexpected integrity related error. Fix the problem by tracking tag_offset in per-IO convert_context. Therefore, when the crypt/decrypt procedure continues in a kworker, it could use the next tag_offset saved in convert_context. Fixes: 8abec36d1274 ("dm crypt: do not wait for backlogged crypto request completion in softirq") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:51 +08:00
dm-verity, dm-crypt: align "struct bvec_iter" correctly "struct bvec_iter" is defined with the __packed attribute, so it is aligned on a single byte. On X86 (and on other architectures that support unaligned addresses in hardware), "struct bvec_iter" is accessed using the 8-byte and 4-byte memory instructions, however these instructions are less efficient if they operate on unaligned addresses. (on RISC machines that don't have unaligned access in hardware, GCC generates byte-by-byte accesses that are very inefficient - see [1]) This commit reorders the entries in "struct dm_verity_io" and "struct convert_context", so that "struct bvec_iter" is aligned on 8 bytes. [1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-20 19:11:51 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: avoid accessing uninitialized tasklet When neither "no_read_workqueue" nor "no_write_workqueue" are enabled, tasklet_trylock() in crypt_dec_pending() may still return false due to an uninitialized state, and dm-crypt will unnecessarily do io completion in io_queue workqueue instead of current context. Fix this by adding an 'in_tasklet' flag to dm_crypt_io struct and initialize it to false in crypt_io_init(). Set this flag to true in kcryptd_queue_crypt() before calling tasklet_schedule(). If set crypt_dec_pending() will punt io completion to a workqueue. This also nicely avoids the tasklet_trylock/unlock hack when tasklets aren't in use. Fixes: 8e14f610159d ("dm crypt: do not call bio_endio() from the dm-crypt tasklet") Cc: stable@vger.kernel.org Reported-by: Hou Tao <houtao1@huawei.com> Suggested-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-03-08 14:39:54 -05:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: store sector mapping in dm_crypt_io Add sector into dm_crypt_io instead of using local variable. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:54 +00:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: use per-bio data Change dm-crypt so that it uses auxiliary data allocated with the bio. Dm-crypt requires two allocations per request - struct dm_crypt_io and struct ablkcipher_request (with other data appended to it). It previously only used mempool allocations. Some requests may require more dm_crypt_ios and ablkcipher_requests, however most requests need just one of each of these two structures to complete. This patch changes it so that the first dm_crypt_io and ablkcipher_request are allocated with the bio (using target per_bio_data_size option). If the request needs additional values, they are allocated from the mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-28 15:51:55 -04:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: use u64 instead of sector_t to store iv_offset The iv_offset in the mapping table of crypt target is a 64bit number when IV algorithm is plain64, plain64be, essiv or benbi. It will be assigned to iv_offset of struct crypt_config, cc_sector of struct convert_context and iv_sector of struct dm_crypt_request. These structures members are defined as a sector_t. But sector_t is 32bit when CONFIG_LBDAF is not set in 32bit kernel. In this situation sector_t is not big enough to store the 64bit iv_offset. Here is a reproducer. Prepare test image and device (loop is automatically allocated by cryptsetup): # dd if=/dev/zero of=tst.img bs=1M count=1 # echo "tst"|cryptsetup open --type plain -c aes-xts-plain64 \ --skip 500000000000000000 tst.img test On 32bit system (use IV offset value that overflows to 64bit; CONFIG_LBDAF if off) and device checksum is wrong: # dmsetup table test --showkeys 0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 3551657984 7:0 0 # sha256sum /dev/mapper/test 533e25c09176632b3794f35303488c4a8f3f965dffffa6ec2df347c168cb6c19 /dev/mapper/test On 64bit system (and on 32bit system with the patch), table and checksum is now correct: # dmsetup table test --showkeys 0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 500000000000000000 7:0 0 # sha256sum /dev/mapper/test 5d16160f9d5f8c33d8051e65fdb4f003cc31cd652b5abb08f03aa6fce0df75fc /dev/mapper/test Signed-off-by: AliOS system security <alios_sys_security@linux.alibaba.com> Tested-and-Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-11-05 15:31:42 +08:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: tidy whitespace Clean up, convert some spaces to tabs. No functional change here. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:42:37 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm-crypt: Make crypt_iv_operations::wipe return void Since all implementations of crypt_iv_operations::wipe now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:51 -07:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add 'submit_from_crypt_cpus' option Make it possible to disable offloading writes by setting the optional 'submit_from_crypt_cpus' table argument. There are some situations where offloading write bios from the encryption threads to a single thread degrades performance significantly. The default is to offload write bios to the same thread because it benefits CFQ to have writes submitted using the same IO context. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:08 -05:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: Spelling s/cihper/cipher/ Fix a misspelling of "cipher". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-12-16 14:15:42 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Allow to specify the integrity key size as option For the MAC based integrity operation, the integrity key size (i.e. key_mac_size) is currently set to the digest size of the used digest. For wrapped key HMAC algorithms, the key size is independent of the cryptographic key size. So there is no known size of the mac key in such cases. The desired key size can optionally be specified as argument when the dm-crypt device is configured via 'integrity_key_size:%u'. If no integrity_key_size argument is specified, the mac key size is still set to the digest size, as before. Increase version number to 1.28.0 so that support for the new argument can be detected by user space (i.e. cryptsetup). Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-08-16 13:21:33 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: fix cpu hotplug crash by removing per-cpu structure The DM crypt target used per-cpu structures to hold pointers to a ablkcipher_request structure. The code assumed that the work item keeps executing on a single CPU, so it didn't use synchronization when accessing this structure. If a CPU is disabled by writing 0 to /sys/devices/system/cpu/cpu*/online, the work item could be moved to another CPU. This causes dm-crypt crashes, like the following, because the code starts using an incorrect ablkcipher_request: smpboot: CPU 7 is now offline BUG: unable to handle kernel NULL pointer dereference at 0000000000000130 IP: [<ffffffffa1862b3d>] crypt_convert+0x12d/0x3c0 [dm_crypt] ... Call Trace: [<ffffffffa1864415>] ? kcryptd_crypt+0x305/0x470 [dm_crypt] [<ffffffff81062060>] ? finish_task_switch+0x40/0xc0 [<ffffffff81052a28>] ? process_one_work+0x168/0x470 [<ffffffff8105366b>] ? worker_thread+0x10b/0x390 [<ffffffff81053560>] ? manage_workers.isra.26+0x290/0x290 [<ffffffff81058d9f>] ? kthread+0xaf/0xc0 [<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff813464ac>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120 Fix this bug by removing the per-cpu definition. The structure ablkcipher_request is accessed via a pointer from convert_context. Consequently, if the work item is rescheduled to a different CPU, the thread still uses the same ablkcipher_request. This change may undermine performance improvements intended by commit c0297721 ("dm crypt: scale to multiple cpus") on select hardware. In practice no performance difference was observed on recent hardware. But regardless, correctness is more important than performance. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2014-02-20 18:01:01 -05:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: use wake_up_process() instead of a wait queue This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-11 12:10:51 -04:00
dm: adjust structure members to improve alignment Eliminate most holes in DM data structures that were modified by commit 6f1c819c21 ("dm: convert to bioset_init()/mempool_init()"). Also prevent structure members from unnecessarily spanning cache lines. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-05-22 18:26:20 -04:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:52 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: constify crypt_iv_operations structures The crypt_iv_operations are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-29 14:09:19 +01:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
dm crypt: use u64 instead of sector_t to store iv_offset The iv_offset in the mapping table of crypt target is a 64bit number when IV algorithm is plain64, plain64be, essiv or benbi. It will be assigned to iv_offset of struct crypt_config, cc_sector of struct convert_context and iv_sector of struct dm_crypt_request. These structures members are defined as a sector_t. But sector_t is 32bit when CONFIG_LBDAF is not set in 32bit kernel. In this situation sector_t is not big enough to store the 64bit iv_offset. Here is a reproducer. Prepare test image and device (loop is automatically allocated by cryptsetup): # dd if=/dev/zero of=tst.img bs=1M count=1 # echo "tst"|cryptsetup open --type plain -c aes-xts-plain64 \ --skip 500000000000000000 tst.img test On 32bit system (use IV offset value that overflows to 64bit; CONFIG_LBDAF if off) and device checksum is wrong: # dmsetup table test --showkeys 0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 3551657984 7:0 0 # sha256sum /dev/mapper/test 533e25c09176632b3794f35303488c4a8f3f965dffffa6ec2df347c168cb6c19 /dev/mapper/test On 64bit system (and on 32bit system with the patch), table and checksum is now correct: # dmsetup table test --showkeys 0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 500000000000000000 7:0 0 # sha256sum /dev/mapper/test 5d16160f9d5f8c33d8051e65fdb4f003cc31cd652b5abb08f03aa6fce0df75fc /dev/mapper/test Signed-off-by: AliOS system security <alios_sys_security@linux.alibaba.com> Tested-and-Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-11-05 15:31:42 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: Use skcipher and ahash This patch replaces uses of ablkcipher with skcipher, and the long obsolete hash interface with ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-24 21:16:36 +08:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: use per-bio data Change dm-crypt so that it uses auxiliary data allocated with the bio. Dm-crypt requires two allocations per request - struct dm_crypt_io and struct ablkcipher_request (with other data appended to it). It previously only used mempool allocations. Some requests may require more dm_crypt_ios and ablkcipher_requests, however most requests need just one of each of these two structures to complete. This patch changes it so that the first dm_crypt_io and ablkcipher_request are allocated with the bio (using target per_bio_data_size option). If the request needs additional values, they are allocated from the mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-28 15:51:55 -04:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: adjust structure members to improve alignment Eliminate most holes in DM data structures that were modified by commit 6f1c819c21 ("dm: convert to bioset_init()/mempool_init()"). Also prevent structure members from unnecessarily spanning cache lines. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-05-22 18:26:20 -04:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm: adjust structure members to improve alignment Eliminate most holes in DM data structures that were modified by commit 6f1c819c21 ("dm: convert to bioset_init()/mempool_init()"). Also prevent structure members from unnecessarily spanning cache lines. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-05-22 18:26:20 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: Annotate struct crypt_config with __counted_by Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct crypt_config. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: dm-devel@redhat.com Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230915200344.never.272-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2023-09-15 13:03:45 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
dm: avoid initializing static variables Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-30 21:28:24 +01:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
block: rename BIO_MAX_PAGES to BIO_MAX_VECS Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop confusing users of the bio API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-11 12:01:37 +01:00
dm-crypt: limit the size of encryption requests There was a performance regression reported where dm-crypt would perform worse on new kernels than on old kernels. The reason is that the old kernels split the bios to NVMe request size (that is usually 65536 or 131072 bytes) and the new kernels pass the big bios through dm-crypt and split them underneath. If a big 1MiB bio is passed to dm-crypt, dm-crypt processes it on a single core without parallelization and this is what causes the performance degradation. This commit introduces new tunable variables /sys/module/dm_crypt/parameters/max_read_size and /sys/module/dm_crypt/parameters/max_write_size that specify the maximum bio size for dm-crypt. Bios larger than this value are split, so that they can be encrypted in parallel by multiple cores. If these variables are '0', a default 131072 is used. Splitting bios may cause performance regressions in other workloads - if this happens, the user should increase the value in max_read_size and max_write_size variables. max_read_size: 128k 2399MiB/s 256k 2368MiB/s 512k 1986MiB/s 1024 1790MiB/s max_write_size: 128k 1712MiB/s 256k 1651MiB/s 512k 1537MiB/s 1024k 1332MiB/s Note that if you run dm-crypt inside a virtual machine, you may need to do "echo numa >/sys/module/workqueue/parameters/default_affinity_scope" to improve performance. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com>
2024-07-03 15:00:29 +02:00
dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices. Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-25 18:33:26 +09:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
dm-crypt: limit the size of encryption requests There was a performance regression reported where dm-crypt would perform worse on new kernels than on old kernels. The reason is that the old kernels split the bios to NVMe request size (that is usually 65536 or 131072 bytes) and the new kernels pass the big bios through dm-crypt and split them underneath. If a big 1MiB bio is passed to dm-crypt, dm-crypt processes it on a single core without parallelization and this is what causes the performance degradation. This commit introduces new tunable variables /sys/module/dm_crypt/parameters/max_read_size and /sys/module/dm_crypt/parameters/max_write_size that specify the maximum bio size for dm-crypt. Bios larger than this value are split, so that they can be encrypted in parallel by multiple cores. If these variables are '0', a default 131072 is used. Splitting bios may cause performance regressions in other workloads - if this happens, the user should increase the value in max_read_size and max_write_size variables. max_read_size: 128k 2399MiB/s 256k 2368MiB/s 512k 1986MiB/s 1024 1790MiB/s max_write_size: 128k 1712MiB/s 256k 1651MiB/s 512k 1537MiB/s 1024k 1332MiB/s Note that if you run dm-crypt inside a virtual machine, you may need to do "echo numa >/sys/module/workqueue/parameters/default_affinity_scope" to improve performance. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com>
2024-07-03 15:00:29 +02:00
dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices. Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-25 18:33:26 +09:00
dm-crypt: limit the size of encryption requests There was a performance regression reported where dm-crypt would perform worse on new kernels than on old kernels. The reason is that the old kernels split the bios to NVMe request size (that is usually 65536 or 131072 bytes) and the new kernels pass the big bios through dm-crypt and split them underneath. If a big 1MiB bio is passed to dm-crypt, dm-crypt processes it on a single core without parallelization and this is what causes the performance degradation. This commit introduces new tunable variables /sys/module/dm_crypt/parameters/max_read_size and /sys/module/dm_crypt/parameters/max_write_size that specify the maximum bio size for dm-crypt. Bios larger than this value are split, so that they can be encrypted in parallel by multiple cores. If these variables are '0', a default 131072 is used. Splitting bios may cause performance regressions in other workloads - if this happens, the user should increase the value in max_read_size and max_write_size variables. max_read_size: 128k 2399MiB/s 256k 2368MiB/s 512k 1986MiB/s 1024 1790MiB/s max_write_size: 128k 1712MiB/s 256k 1651MiB/s 512k 1537MiB/s 1024k 1332MiB/s Note that if you run dm-crypt inside a virtual machine, you may need to do "echo numa >/sys/module/workqueue/parameters/default_affinity_scope" to improve performance. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com>
2024-07-03 15:00:29 +02:00
dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices. Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-25 18:33:26 +09:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices. Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-25 18:33:26 +09:00
dm-crypt: limit the size of encryption requests There was a performance regression reported where dm-crypt would perform worse on new kernels than on old kernels. The reason is that the old kernels split the bios to NVMe request size (that is usually 65536 or 131072 bytes) and the new kernels pass the big bios through dm-crypt and split them underneath. If a big 1MiB bio is passed to dm-crypt, dm-crypt processes it on a single core without parallelization and this is what causes the performance degradation. This commit introduces new tunable variables /sys/module/dm_crypt/parameters/max_read_size and /sys/module/dm_crypt/parameters/max_write_size that specify the maximum bio size for dm-crypt. Bios larger than this value are split, so that they can be encrypted in parallel by multiple cores. If these variables are '0', a default 131072 is used. Splitting bios may cause performance regressions in other workloads - if this happens, the user should increase the value in max_read_size and max_write_size variables. max_read_size: 128k 2399MiB/s 256k 2368MiB/s 512k 1986MiB/s 1024 1790MiB/s max_write_size: 128k 1712MiB/s 256k 1651MiB/s 512k 1537MiB/s 1024k 1332MiB/s Note that if you run dm-crypt inside a virtual machine, you may need to do "echo numa >/sys/module/workqueue/parameters/default_affinity_scope" to improve performance. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com>
2024-07-03 15:00:29 +02:00
dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices. Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-25 18:33:26 +09:00
dm-crypt: limit the size of encryption requests There was a performance regression reported where dm-crypt would perform worse on new kernels than on old kernels. The reason is that the old kernels split the bios to NVMe request size (that is usually 65536 or 131072 bytes) and the new kernels pass the big bios through dm-crypt and split them underneath. If a big 1MiB bio is passed to dm-crypt, dm-crypt processes it on a single core without parallelization and this is what causes the performance degradation. This commit introduces new tunable variables /sys/module/dm_crypt/parameters/max_read_size and /sys/module/dm_crypt/parameters/max_write_size that specify the maximum bio size for dm-crypt. Bios larger than this value are split, so that they can be encrypted in parallel by multiple cores. If these variables are '0', a default 131072 is used. Splitting bios may cause performance regressions in other workloads - if this happens, the user should increase the value in max_read_size and max_write_size variables. max_read_size: 128k 2399MiB/s 256k 2368MiB/s 512k 1986MiB/s 1024 1790MiB/s max_write_size: 128k 1712MiB/s 256k 1651MiB/s 512k 1537MiB/s 1024k 1332MiB/s Note that if you run dm-crypt inside a virtual machine, you may need to do "echo numa >/sys/module/workqueue/parameters/default_affinity_scope" to improve performance. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com>
2024-07-03 15:00:29 +02:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
dm-crypt: remove clone_init Just open code it next to the bio allocations, which saves a few lines of code, prepares for future changes and allows to remove the duplicate bi_opf assignment for the bio_clone_fast case in kcryptd_io_read. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220124091107.642561-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:10:54 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix call to clone_init Call clone_init early We need to call clone_init as early as possible - at least before call bio_put(clone) in any error path. Otherwise, the destructor will try to dereference bi_private, which may still be NULL. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:52 -07:00
dm crypt: use crypt_integrity_aead() helper Replace test_bit(CRYPT_MODE_INTEGRITY_AEAD, XXX) with crypt_integrity_aead(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-13 12:11:26 +08:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: remove obsolete references to per-CPU state dm-crypt used to use separate crypto transforms for each CPU, but this is no longer the case. To avoid confusion, fix up obsolete comments and rename setup_essiv_cpu(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-30 22:18:48 -07:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: Use skcipher and ahash This patch replaces uses of ablkcipher with skcipher, and the long obsolete hash interface with ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-24 21:16:36 +08:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: trivial comment improvements Just some minor comment nits. - little-endian is better than low-endian - and since it is called essiv everywere it should also be essiv in the comments (and not ess_iv) Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-02 18:17:33 +10:00
Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm crypt: add big-endian variant of plain64 IV The big-endian IV (plain64be) is needed to map images from extracted disks that are used in some external (on-chip FDE) disk encryption drives, e.g.: data recovery from external USB/SATA drives that support "internal" encryption. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-06 09:07:01 +02:00
[BLOCK] dm-crypt: trivial comment improvements Just some minor comment nits. - little-endian is better than low-endian - and since it is called essiv everywere it should also be essiv in the comments (and not ess_iv) Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-02 18:17:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: add null iv Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:55 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: update URLs to new cryptsetup project page Cryptsetup home page moved to GitLab. Also remove link to abandonded Truecrypt page. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-05 18:03:10 +02:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
Replace HTTP links with HTTPS ones: LVM Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200627103138.71885-1-grandmaster@al2klimov.de Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-06-27 12:31:38 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: suppress endian warnings Suppress sparse warnings about cpu_to_le32() by using __le32 types for on-disk data etc. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:01 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm: suppress endian warnings Suppress sparse warnings about cpu_to_le32() by using __le32 types for on-disk data etc. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:01 +01:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm crypt: add big-endian variant of plain64 IV The big-endian IV (plain64be) is needed to map images from extracted disks that are used in some external (on-chip FDE) disk encryption drives, e.g.: data recovery from external USB/SATA drives that support "internal" encryption. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-06 09:07:01 +02:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: switch to ESSIV crypto API template Replace the explicit ESSIV handling in the dm-crypt driver with calls into the crypto API, which now possesses the capability to perform this processing within the crypto subsystem. Note that we reorder the AEAD cipher_api string parsing with the TFM instantiation: this is needed because cipher_api is mangled by the ESSIV handling, and throws off the parsing of "authenc(" otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-19 17:17:37 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: suppress endian warnings Suppress sparse warnings about cpu_to_le32() by using __le32 types for on-disk data etc. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:01 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: fix benbi IV constructor crash if used in authenticated mode If benbi IV is used in AEAD construction, for example: cryptsetup luksFormat <device> --cipher twofish-xts-benbi --key-size 512 --integrity=hmac-sha256 the constructor uses wrong skcipher function and crashes: BUG: kernel NULL pointer dereference, address: 00000014 ... EIP: crypt_iv_benbi_ctr+0x15/0x70 [dm_crypt] Call Trace: ? crypt_subkey_size+0x20/0x20 [dm_crypt] crypt_ctr+0x567/0xfc0 [dm_crypt] dm_table_add_target+0x15f/0x340 [dm_mod] Fix this by properly using crypt_aead_blocksize() in this case. Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # v4.12+ Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=941051 Reported-by: Jerad Simpson <jbsimpson@gmail.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-06 10:11:47 +01:00
dm crypt: use crypt_integrity_aead() helper Replace test_bit(CRYPT_MODE_INTEGRITY_AEAD, XXX) with crypt_integrity_aead(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-13 12:11:26 +08:00
dm crypt: fix benbi IV constructor crash if used in authenticated mode If benbi IV is used in AEAD construction, for example: cryptsetup luksFormat <device> --cipher twofish-xts-benbi --key-size 512 --integrity=hmac-sha256 the constructor uses wrong skcipher function and crashes: BUG: kernel NULL pointer dereference, address: 00000014 ... EIP: crypt_iv_benbi_ctr+0x15/0x70 [dm_crypt] Call Trace: ? crypt_subkey_size+0x20/0x20 [dm_crypt] crypt_ctr+0x567/0xfc0 [dm_crypt] dm_table_add_target+0x15f/0x340 [dm_mod] Fix this by properly using crypt_aead_blocksize() in this case. Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # v4.12+ Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=941051 Reported-by: Jerad Simpson <jbsimpson@gmail.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-06 10:11:47 +01:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm: correct block comments format. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-26 15:48:30 +01:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: add null iv Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:55 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06 23:18:13 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Make crypt_iv_operations::wipe return void Since all implementations of crypt_iv_operations::wipe now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:51 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm-crypt: Use MD5 library instead of crypto_shash The lmk IV mode, which dm-crypt supports for Loop-AES compatibility, involves an MD5 computation. Update its implementation to use the MD5 library API instead of crypto_shash. This has many benefits, such as: - Simpler code. Notably, much of the error-handling code is no longer needed, since the library functions can't fail. - Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes on the stack instead of 520 bytes. - The library functions are strongly typed, preventing bugs like https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com - Slightly improved performance, as the library provides direct access to the MD5 code without unnecessary overhead such as indirect calls. To preserve the existing behavior of lmk support being disabled when the kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check fips_enabled itself. Previously it relied on crypto_alloc_shash("md5") failing. (I don't know for sure that lmk *actually* needs to be disallowed in FIPS mode; this just preserves the existing behavior.) Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2025-10-11 11:10:42 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06 23:18:13 -07:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06 23:18:13 -07:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm-crypt: Make crypt_iv_operations::wipe return void Since all implementations of crypt_iv_operations::wipe now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:51 -07:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm-crypt: switch to using the crc32 library Now that the crc32() library function takes advantage of architecture-specific optimizations, it is unnecessary to go through the crypto API. Just use crc32(). This is much simpler, and it improves performance due to eliminating the crypto API overhead. (However, this only affects the TCW IV mode of dm-crypt, which is a compatibility mode that is rarely used compared to other dm-crypt modes.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-27 14:15:33 -08:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: Fix sparse complaints Avoid that sparse complains about assigning a __le64 value to a u64 variable. Remove the (u64) casts since these are superfluous. This patch does not change the behavior of the source code. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-28 16:32:32 +02:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm-crypt: switch to using the crc32 library Now that the crc32() library function takes advantage of architecture-specific optimizations, it is unnecessary to go through the crypto API. Just use crc32(). This is much simpler, and it improves performance due to eliminating the crypto API overhead. (However, this only affects the TCW IV mode of dm-crypt, which is a compatibility mode that is rarely used compared to other dm-crypt modes.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-27 14:15:33 -08:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
crypto: algapi - make crypto_xor() take separate dst and src arguments There are quite a number of occurrences in the kernel of the pattern if (dst != src) memcpy(dst, src, walk.total % AES_BLOCK_SIZE); crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE); or crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); where crypto_xor() is preceded or followed by a memcpy() invocation that is only there because crypto_xor() uses its output parameter as one of the inputs. To avoid having to add new instances of this pattern in the arm64 code, which will be refactored to implement non-SIMD fallbacks, add an alternative implementation called crypto_xor_cpy(), taking separate input and output arguments. This removes the need for the separate memcpy(). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-24 11:28:04 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm-crypt: switch to using the crc32 library Now that the crc32() library function takes advantage of architecture-specific optimizations, it is unnecessary to go through the crypto API. Just use crc32(). This is much simpler, and it improves performance due to eliminating the crypto API overhead. (However, this only affects the TCW IV mode of dm-crypt, which is a compatibility mode that is rarely used compared to other dm-crypt modes.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-27 14:15:33 -08:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: use memzero_explicit for on-stack buffer Use memzero_explicit to cleanup sensitive data allocated on stack to prevent the compiler from optimizing and removing memset() calls. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2014-11-22 09:36:04 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: Fix sparse complaints Avoid that sparse complains about assigning a __le64 value to a u64 variable. Remove the (u64) casts since these are superfluous. This patch does not change the behavior of the source code. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-28 16:32:32 +02:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm-crypt: switch to using the crc32 library Now that the crc32() library function takes advantage of architecture-specific optimizations, it is unnecessary to go through the crypto API. Just use crc32(). This is much simpler, and it improves performance due to eliminating the crypto API overhead. (However, this only affects the TCW IV mode of dm-crypt, which is a compatibility mode that is rarely used compared to other dm-crypt modes.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-27 14:15:33 -08:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
crypto: algapi - make crypto_xor() take separate dst and src arguments There are quite a number of occurrences in the kernel of the pattern if (dst != src) memcpy(dst, src, walk.total % AES_BLOCK_SIZE); crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE); or crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); where crypto_xor() is preceded or followed by a memcpy() invocation that is only there because crypto_xor() uses its output parameter as one of the inputs. To avoid having to add new instances of this pattern in the arm64 code, which will be refactored to implement non-SIMD fallbacks, add an alternative implementation called crypto_xor_cpy(), taking separate input and output arguments. This removes the need for the separate memcpy(). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-24 11:28:04 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
crypto: algapi - make crypto_xor() take separate dst and src arguments There are quite a number of occurrences in the kernel of the pattern if (dst != src) memcpy(dst, src, walk.total % AES_BLOCK_SIZE); crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE); or crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); where crypto_xor() is preceded or followed by a memcpy() invocation that is only there because crypto_xor() uses its output parameter as one of the inputs. To avoid having to add new instances of this pattern in the arm64 code, which will be refactored to implement non-SIMD fallbacks, add an alternative implementation called crypto_xor_cpy(), taking separate input and output arguments. This removes the need for the separate memcpy(). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-24 11:28:04 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm-crypt: switch to using the crc32 library Now that the crc32() library function takes advantage of architecture-specific optimizations, it is unnecessary to go through the crypto API. Just use crc32(). This is much simpler, and it improves performance due to eliminating the crypto API overhead. (However, this only affects the TCW IV mode of dm-crypt, which is a compatibility mode that is rarely used compared to other dm-crypt modes.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-27 14:15:33 -08:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm-crypt: switch to using the crc32 library Now that the crc32() library function takes advantage of architecture-specific optimizations, it is unnecessary to go through the crypto API. Just use crc32(). This is much simpler, and it improves performance due to eliminating the crypto API overhead. (However, this only affects the TCW IV mode of dm-crypt, which is a compatibility mode that is rarely used compared to other dm-crypt modes.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-27 14:15:33 -08:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: use crypt_integrity_aead() helper Replace test_bit(CRYPT_MODE_INTEGRITY_AEAD, XXX) with crypt_integrity_aead(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-13 12:11:26 +08:00
dm crypt: reuse eboiv skcipher for IV generation Instead of instantiating a separate cipher to perform the encryption needed to produce the IV, reuse the skcipher used for the block data and invoke it one additional time for each block to encrypt a zero vector and use the output as the IV. For CBC mode, this is equivalent to using the bare block cipher, but without the risk of ending up with a non-time invariant implementation of AES when the skcipher itself is time variant (e.g., arm64 without Crypto Extensions has a NEON based time invariant implementation of cbc(aes) but no time invariant implementation of the core cipher other than aes-ti, which is not enabled by default). This approach is a compromise between dm-crypt API flexibility and reducing dependence on parts of the crypto API that should not usually be exposed to other subsystems, such as the bare cipher API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-07 08:50:22 +03:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: reuse eboiv skcipher for IV generation Instead of instantiating a separate cipher to perform the encryption needed to produce the IV, reuse the skcipher used for the block data and invoke it one additional time for each block to encrypt a zero vector and use the output as the IV. For CBC mode, this is equivalent to using the bare block cipher, but without the risk of ending up with a non-time invariant implementation of AES when the skcipher itself is time variant (e.g., arm64 without Crypto Extensions has a NEON based time invariant implementation of cbc(aes) but no time invariant implementation of the core cipher other than aes-ti, which is not enabled by default). This approach is a compromise between dm-crypt API flexibility and reducing dependence on parts of the crypto API that should not usually be exposed to other subsystems, such as the bare cipher API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-07 08:50:22 +03:00
dm: avoid split of quoted strings where possible Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-03 18:55:47 +01:00
dm crypt: reuse eboiv skcipher for IV generation Instead of instantiating a separate cipher to perform the encryption needed to produce the IV, reuse the skcipher used for the block data and invoke it one additional time for each block to encrypt a zero vector and use the output as the IV. For CBC mode, this is equivalent to using the bare block cipher, but without the risk of ending up with a non-time invariant implementation of AES when the skcipher itself is time variant (e.g., arm64 without Crypto Extensions has a NEON based time invariant implementation of cbc(aes) but no time invariant implementation of the core cipher other than aes-ti, which is not enabled by default). This approach is a compromise between dm-crypt API flexibility and reducing dependence on parts of the crypto API that should not usually be exposed to other subsystems, such as the bare cipher API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-07 08:50:22 +03:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should not be relied on by users of the Crypto API. Instead of storing the IV on the stack, allocate it together with the crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-01 16:47:43 +08:00
dm crypt: reuse eboiv skcipher for IV generation Instead of instantiating a separate cipher to perform the encryption needed to produce the IV, reuse the skcipher used for the block data and invoke it one additional time for each block to encrypt a zero vector and use the output as the IV. For CBC mode, this is equivalent to using the bare block cipher, but without the risk of ending up with a non-time invariant implementation of AES when the skcipher itself is time variant (e.g., arm64 without Crypto Extensions has a NEON based time invariant implementation of cbc(aes) but no time invariant implementation of the core cipher other than aes-ti, which is not enabled by default). This approach is a compromise between dm-crypt API flexibility and reducing dependence on parts of the crypto API that should not usually be exposed to other subsystems, such as the bare cipher API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-07 08:50:22 +03:00
dm crypt: Initialize crypto wait structures Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto wait structures declared on stack before their use with crypto_wait_req(). Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation") Fixes: bbb1658461ac ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-08-31 14:55:55 +09:00
dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should not be relied on by users of the Crypto API. Instead of storing the IV on the stack, allocate it together with the crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-01 16:47:43 +08:00
dm crypt: reuse eboiv skcipher for IV generation Instead of instantiating a separate cipher to perform the encryption needed to produce the IV, reuse the skcipher used for the block data and invoke it one additional time for each block to encrypt a zero vector and use the output as the IV. For CBC mode, this is equivalent to using the bare block cipher, but without the risk of ending up with a non-time invariant implementation of AES when the skcipher itself is time variant (e.g., arm64 without Crypto Extensions has a NEON based time invariant implementation of cbc(aes) but no time invariant implementation of the core cipher other than aes-ti, which is not enabled by default). This approach is a compromise between dm-crypt API flexibility and reducing dependence on parts of the crypto API that should not usually be exposed to other subsystems, such as the bare cipher API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-07 08:50:22 +03:00
dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should not be relied on by users of the Crypto API. Instead of storing the IV on the stack, allocate it together with the crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-01 16:47:43 +08:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: Fix reqsize in crypt_iv_eboiv_gen A skcipher_request object is made up of struct skcipher_request followed by a variable-sized trailer. The allocation of the skcipher_request and IV in crypt_iv_eboiv_gen is missing the memory for struct skcipher_request. Fix it by adding it to reqsize. Fixes: e3023094dffb ("dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE") Cc: <stable@vger.kernel.org> #6.5+ Reported-by: Tatu Heikkilä <tatu.heikkila@gmail.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-06 09:41:55 +08:00
dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should not be relied on by users of the Crypto API. Instead of storing the IV on the stack, allocate it together with the crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-01 16:47:43 +08:00
dm crypt: reuse eboiv skcipher for IV generation Instead of instantiating a separate cipher to perform the encryption needed to produce the IV, reuse the skcipher used for the block data and invoke it one additional time for each block to encrypt a zero vector and use the output as the IV. For CBC mode, this is equivalent to using the bare block cipher, but without the risk of ending up with a non-time invariant implementation of AES when the skcipher itself is time variant (e.g., arm64 without Crypto Extensions has a NEON based time invariant implementation of cbc(aes) but no time invariant implementation of the core cipher other than aes-ti, which is not enabled by default). This approach is a compromise between dm-crypt API flexibility and reducing dependence on parts of the crypto API that should not usually be exposed to other subsystems, such as the bare cipher API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-07 08:50:22 +03:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should not be relied on by users of the Crypto API. Instead of storing the IV on the stack, allocate it together with the crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-01 16:47:43 +08:00
dm crypt: reuse eboiv skcipher for IV generation Instead of instantiating a separate cipher to perform the encryption needed to produce the IV, reuse the skcipher used for the block data and invoke it one additional time for each block to encrypt a zero vector and use the output as the IV. For CBC mode, this is equivalent to using the bare block cipher, but without the risk of ending up with a non-time invariant implementation of AES when the skcipher itself is time variant (e.g., arm64 without Crypto Extensions has a NEON based time invariant implementation of cbc(aes) but no time invariant implementation of the core cipher other than aes-ti, which is not enabled by default). This approach is a compromise between dm-crypt API flexibility and reducing dependence on parts of the crypto API that should not usually be exposed to other subsystems, such as the bare cipher API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-07 08:50:22 +03:00
dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should not be relied on by users of the Crypto API. Instead of storing the IV on the stack, allocate it together with the crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-01 16:47:43 +08:00
dm crypt: reuse eboiv skcipher for IV generation Instead of instantiating a separate cipher to perform the encryption needed to produce the IV, reuse the skcipher used for the block data and invoke it one additional time for each block to encrypt a zero vector and use the output as the IV. For CBC mode, this is equivalent to using the bare block cipher, but without the risk of ending up with a non-time invariant implementation of AES when the skcipher itself is time variant (e.g., arm64 without Crypto Extensions has a NEON based time invariant implementation of cbc(aes) but no time invariant implementation of the core cipher other than aes-ti, which is not enabled by default). This approach is a compromise between dm-crypt API flexibility and reducing dependence on parts of the crypto API that should not usually be exposed to other subsystems, such as the bare cipher API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-07 08:50:22 +03:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm crypt: correct 'foo*' to 'foo *' Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-31 19:47:36 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm crypt: correct 'foo*' to 'foo *' Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-31 19:47:36 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm: prefer kmap_local_page() instead of deprecated kmap_atomic() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-07 20:22:58 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Make crypt_iv_operations::wipe return void Since all implementations of crypt_iv_operations::wipe now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:51 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm-crypt: Reimplement elephant diffuser using AES library Simplify and optimize dm-crypt's implementation of Bitlocker's "elephant diffuser" to use the AES library instead of an "ecb(aes)" crypto_skcipher. Note: struct aes_enckey is fixed-size, so it could be embedded directly in struct iv_elephant_private. But I kept it as a separate allocation so that the size of struct crypt_config doesn't increase. The elephant diffuser is rarely used in dm-crypt. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:50 -07:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm crypt: constify crypt_iv_operations structures The crypt_iv_operations are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-29 14:09:19 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: constify crypt_iv_operations structures The crypt_iv_operations are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-29 14:09:19 +01:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm crypt: add big-endian variant of plain64 IV The big-endian IV (plain64be) is needed to map images from extracted disks that are used in some external (on-chip FDE) disk encryption drives, e.g.: data recovery from external USB/SATA drives that support "internal" encryption. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-06 09:07:01 +02:00
dm crypt: constify crypt_iv_operations structures The crypt_iv_operations are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-29 14:09:19 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: constify crypt_iv_operations structures The crypt_iv_operations are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-29 14:09:19 +01:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: constify crypt_iv_operations structures The crypt_iv_operations are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-29 14:09:19 +01:00
dm crypt: add null iv Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:55 -07:00
dm crypt: constify crypt_iv_operations structures The crypt_iv_operations are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-29 14:09:19 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: constify crypt_iv_operations structures The crypt_iv_operations are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-29 14:09:19 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: Constify static crypt_iv_operations The only usage of these structs is to assign their address to the iv_gen_ops field in the crypt config struct, which is a pointer to const. Make them const like the rest of the static crypt_iv_operations structs. This allows the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-11-21 23:22:48 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: Constify static crypt_iv_operations The only usage of these structs is to assign their address to the iv_gen_ops field in the crypt config struct, which is a pointer to const. Make them const like the rest of the static crypt_iv_operations structs. This allows the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-11-21 23:22:48 +01:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: Constify static crypt_iv_operations The only usage of these structs is to assign their address to the iv_gen_ops field in the crypt config struct, which is a pointer to const. Make them const like the rest of the static crypt_iv_operations structs. This allows the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-11-21 23:22:48 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: use bi_sector in bio when initialize integrity seed bio->bi_iter.bi_sector has already been initialized when initialize the integrity seed in dm_crypt_integrity_io_alloc(). There is no need to calculate it again. Therefore, use the helper bip_set_seed() to initialize the seed and pass bi_iter.bi_sector to it instead. Mikulas: We can't use bip_set_seed because it doesn't compile without CONFIG_BLK_DEV_INTEGRITY. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:48 +08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: move detailed message into debug level The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance. Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device). Cc: stable@vger.kernel.org Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-15 16:23:43 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-integrity: use the nop integrity profile Use the block layer built-in nop profile instead of duplicating it. Tested by: $ dd if=/dev/urandom of=key.bin bs=512 count=1 $ cryptsetup luksFormat -q --type luks2 --integrity hmac-sha256 \ --integrity-no-wipe /dev/nvme0n1 key.bin $ cryptsetup luksOpen /dev/nvme0n1 luks-integrity --key-file key.bin and then doing mkfs.xfs and simple I/O on the mount file system. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240613084839.1044015-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-13 10:48:14 +02:00
block: remove the blk_integrity_profile structure Block layer integrity configuration is a bit complex right now, as it indirects through operation vectors for a simple two-dimensional configuration: a) the checksum type of none, ip checksum, crc, crc64 b) the presence or absence of a reference tag Remove the integrity profile, and instead add a separate csum_type flag which replaces the existing ip-checksum field and a new flag that indicates the presence of the reference tag. This removes up to two layers of indirect calls, remove the need to offload the no-op verification of non-PI metadata to a workqueue and generally simplifies the code. The downside is that block/t10-pi.c now has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY already, though. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240613084839.1044015-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-13 10:48:15 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
block: rename tuple_size field in blk_integrity to metadata_size The tuple_size field in blk_integrity currently represents the total size of metadata associated with each data interval. To make the meaning more explicit, rename tuple_size to metadata_size. This is a purely mechanical rename with no functional changes. Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Link: https://lore.kernel.org/20250630090548.3317-2-anuj20.g@samsung.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-06-30 14:35:45 +05:30
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
block: rename tuple_size field in blk_integrity to metadata_size The tuple_size field in blk_integrity currently represents the total size of metadata associated with each data interval. To make the meaning more explicit, rename tuple_size to metadata_size. This is a purely mechanical rename with no functional changes. Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Link: https://lore.kernel.org/20250630090548.3317-2-anuj20.g@samsung.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-06-30 14:35:45 +05:30
dm crypt: fix large block integrity support Previously, dm-crypt could use blocks composed of multiple 512b sectors but it created integrity profile for each 512b sector (it padded it with zeroes). Fix dm-crypt so that the integrity profile is sent for each block not each sector. The user must use the same block size in the DM crypt and integrity targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-18 16:51:54 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: move detailed message into debug level The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance. Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device). Cc: stable@vger.kernel.org Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-15 16:23:43 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: move detailed message into debug level The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance. Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device). Cc: stable@vger.kernel.org Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-15 16:23:43 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: tidy whitespace Clean up, convert some spaces to tabs. No functional change here. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:42:37 +01:00
dm crypt: remove unnecessary crypt_context write parm Remove write attribute from convert_context and use bio flag instead. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:41 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Convert drivers to immutable biovecs Now that we've got a mechanism for immutable biovecs - bi_iter.bi_bvec_done - we need to convert drivers to use primitives that respect it instead of using the bvec array directly. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: NeilBrown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com
2013-10-11 15:45:43 -07:00
dm crypt: rename struct convert_context sector field Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm-crypt: track tag_offset in convert_context dm-crypt uses tag_offset to index the integrity metadata for each crypt sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE, dm-crypt will try to continue the crypt/decrypt procedure in a kworker. However, it resets tag_offset as zero instead of using the tag_offset related with current sector. It may return unexpected data when using random IV or return unexpected integrity related error. Fix the problem by tracking tag_offset in per-IO convert_context. Therefore, when the crypt/decrypt procedure continues in a kworker, it could use the next tag_offset saved in convert_context. Fixes: 8abec36d1274 ("dm crypt: do not wait for backlogged crypto request completion in softirq") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:51 +08:00
dm crypt: add completion for async dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:09 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix endianness annotations around org_sector_of_dmreq The sector used here is a little endian value, so use the right type for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-04 18:33:34 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: add missing empty lines Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-01 23:42:29 +01:00
dm crypt: fix endianness annotations around org_sector_of_dmreq The sector used here is a little endian value, so use the right type for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-04 18:33:34 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: add missing empty lines Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-01 23:42:29 +01:00
dm crypt: correct 'foo*' to 'foo *' Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-31 19:47:36 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
block: Convert drivers to immutable biovecs Now that we've got a mechanism for immutable biovecs - bi_iter.bi_bvec_done - we need to convert drivers to use primitives that respect it instead of using the bvec array directly. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: NeilBrown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com
2013-10-11 15:45:43 -07:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix endianness annotations around org_sector_of_dmreq The sector used here is a little endian value, so use the right type for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-04 18:33:34 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: allow unaligned bv_offset When slub_debug is enabled kmalloc returns unaligned memory. XFS uses this unaligned memory for its buffers (if an unaligned buffer crosses a page, XFS frees it and allocates a full page instead - see the function xfs_buf_allocate_memory). dm-crypt checks if bv_offset is aligned on page size and these checks fail with slub_debug and XFS. Fix this bug by removing the bv_offset checks. Switch to checking if bv_len is aligned instead of bv_offset (this check should be sufficient to prevent overruns if a bio with too small bv_len is received). Fixes: 8f0009a22517 ("dm crypt: optionally support larger encryption sector size") Cc: stable@vger.kernel.org # v4.12+ Reported-by: Bruno Prémont <bonbons@sysophe.eu> Tested-by: Bruno Prémont <bonbons@sysophe.eu> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-07 10:35:57 -05:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: rename struct convert_context sector field Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: print device name in integrity error message This message should better identify the DM device with the integrity failure. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-15 16:22:30 +02:00
dm crypt: log aead integrity violations to audit subsystem Since dm-crypt target can be stacked on dm-integrity targets to provide authenticated encryption, integrity violations are recognized here during aead computation. We use the dm-audit submodule to signal those events to user space, too. The construction and destruction of crypt device mappings are also logged as audit events. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-09-04 11:59:30 +02:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm crypt: print device name in integrity error message This message should better identify the DM device with the integrity failure. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-15 16:22:30 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix endianness annotations around org_sector_of_dmreq The sector used here is a little endian value, so use the right type for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-04 18:33:34 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: allow unaligned bv_offset When slub_debug is enabled kmalloc returns unaligned memory. XFS uses this unaligned memory for its buffers (if an unaligned buffer crosses a page, XFS frees it and allocates a full page instead - see the function xfs_buf_allocate_memory). dm-crypt checks if bv_offset is aligned on page size and these checks fail with slub_debug and XFS. Fix this bug by removing the bv_offset checks. Switch to checking if bv_len is aligned instead of bv_offset (this check should be sufficient to prevent overruns if a bio with too small bv_len is received). Fixes: 8f0009a22517 ("dm crypt: optionally support larger encryption sector size") Cc: stable@vger.kernel.org # v4.12+ Reported-by: Bruno Prémont <bonbons@sysophe.eu> Tested-by: Bruno Prémont <bonbons@sysophe.eu> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-07 10:35:57 -05:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: Use skcipher and ahash This patch replaces uses of ablkcipher with skcipher, and the long obsolete hash interface with ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-24 21:16:36 +08:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: Use skcipher and ahash This patch replaces uses of ablkcipher with skcipher, and the long obsolete hash interface with ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-24 21:16:36 +08:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm: Remove completion function scaffolding This patch removes the temporary scaffolding now that the comletion function signature has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-06 18:22:34 +08:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add comments to better describe crypto processing logic A crypto driver can process requests synchronously or asynchronously and can use an internal driver queue to backlog requests. Add some comments to clarify internal logic and completion return codes. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-15 17:00:25 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock There's a XFS on dm-crypt deadlock, recursing back to itself due to the crypto subsystems use of GFP_KERNEL, reported here: https://bugzilla.kernel.org/show_bug.cgi?id=200835 * dm-crypt calls crypt_convert in xts mode * init_crypt from xts.c calls kmalloc(GFP_KERNEL) * kmalloc(GFP_KERNEL) recurses into the XFS filesystem, the filesystem tries to submit some bios and wait for them, causing a deadlock Fix this by updating both the DM crypt and integrity targets to no longer use the CRYPTO_TFM_REQ_MAY_SLEEP flag, which will change the crypto allocations from GFP_KERNEL to GFP_ATOMIC, therefore they can't recurse into a filesystem. A GFP_ATOMIC allocation can fail, but init_crypt() in xts.c handles the allocation failure gracefully - it will fall back to preallocated buffer if the allocation fails. The crypto API maintainer says that the crypto API only needs to allocate memory when dealing with unaligned buffers and therefore turning CRYPTO_TFM_REQ_MAY_SLEEP off is safe (see this discussion: https://www.redhat.com/archives/dm-devel/2018-August/msg00195.html ) Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-05 09:17:45 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix copy and paste bug in crypt_alloc_req_aead In commit d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq") code was incorrectly copy and pasted from crypt_alloc_req_skcipher()'s crypto request allocation code to crypt_alloc_req_aead(). It is OK from runtime perspective as both simple encryption request pointer and AEAD request pointer are part of a union, but may confuse code reviewers. Fixes: d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-19 20:40:15 +00:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock There's a XFS on dm-crypt deadlock, recursing back to itself due to the crypto subsystems use of GFP_KERNEL, reported here: https://bugzilla.kernel.org/show_bug.cgi?id=200835 * dm-crypt calls crypt_convert in xts mode * init_crypt from xts.c calls kmalloc(GFP_KERNEL) * kmalloc(GFP_KERNEL) recurses into the XFS filesystem, the filesystem tries to submit some bios and wait for them, causing a deadlock Fix this by updating both the DM crypt and integrity targets to no longer use the CRYPTO_TFM_REQ_MAY_SLEEP flag, which will change the crypto allocations from GFP_KERNEL to GFP_ATOMIC, therefore they can't recurse into a filesystem. A GFP_ATOMIC allocation can fail, but init_crypt() in xts.c handles the allocation failure gracefully - it will fall back to preallocated buffer if the allocation fails. The crypto API maintainer says that the crypto API only needs to allocate memory when dealing with unaligned buffers and therefore turning CRYPTO_TFM_REQ_MAY_SLEEP off is safe (see this discussion: https://www.redhat.com/archives/dm-devel/2018-August/msg00195.html ) Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-05 09:17:45 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: use per-bio data Change dm-crypt so that it uses auxiliary data allocated with the bio. Dm-crypt requires two allocations per request - struct dm_crypt_io and struct ablkcipher_request (with other data appended to it). It previously only used mempool allocations. Some requests may require more dm_crypt_ios and ablkcipher_requests, however most requests need just one of each of these two structures to complete. This patch changes it so that the first dm_crypt_io and ablkcipher_request are allocated with the bio (using target per_bio_data_size option). If the request needs additional values, they are allocated from the mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-28 15:51:55 -04:00
dm crypt: Use skcipher and ahash This patch replaces uses of ablkcipher with skcipher, and the long obsolete hash interface with ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-24 21:16:36 +08:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm crypt: use per-bio data Change dm-crypt so that it uses auxiliary data allocated with the bio. Dm-crypt requires two allocations per request - struct dm_crypt_io and struct ablkcipher_request (with other data appended to it). It previously only used mempool allocations. Some requests may require more dm_crypt_ios and ablkcipher_requests, however most requests need just one of each of these two structures to complete. This patch changes it so that the first dm_crypt_io and ablkcipher_request are allocated with the bio (using target per_bio_data_size option). If the request needs additional values, they are allocated from the mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-28 15:51:55 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
dm crypt: tidy ctx pending Move the initialisation of ctx->pending into one place, at the start of crypt_convert(). Introduce crypt_finished to indicate whether or not the encryption is finished, for use in a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
block: Convert drivers to immutable biovecs Now that we've got a mechanism for immutable biovecs - bi_iter.bi_bvec_done - we need to convert drivers to use primitives that respect it instead of using the bvec array directly. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: NeilBrown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com
2013-10-11 15:45:43 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:48 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm-crypt: track tag_offset in convert_context dm-crypt uses tag_offset to index the integrity metadata for each crypt sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE, dm-crypt will try to continue the crypt/decrypt procedure in a kworker. However, it resets tag_offset as zero instead of using the tag_offset related with current sector. It may return unexpected data when using random IV or return unexpected integrity related error. Fix the problem by tracking tag_offset in per-IO convert_context. Therefore, when the crypt/decrypt procedure continues in a kworker, it could use the next tag_offset saved in convert_context. Fixes: 8abec36d1274 ("dm crypt: do not wait for backlogged crypto request completion in softirq") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:51 +08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: track tag_offset in convert_context dm-crypt uses tag_offset to index the integrity metadata for each crypt sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE, dm-crypt will try to continue the crypt/decrypt procedure in a kworker. However, it resets tag_offset as zero instead of using the tag_offset related with current sector. It may return unexpected data when using random IV or return unexpected integrity related error. Fix the problem by tracking tag_offset in per-IO convert_context. Therefore, when the crypt/decrypt procedure continues in a kworker, it could use the next tag_offset saved in convert_context. Fixes: 8abec36d1274 ("dm crypt: do not wait for backlogged crypto request completion in softirq") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:51 +08:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add comments to better describe crypto processing logic A crypto driver can process requests synchronously or asynchronously and can use an internal driver queue to backlog requests. Add some comments to clarify internal logic and completion return codes. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-15 17:00:25 +02:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
dm-crypt: track tag_offset in convert_context dm-crypt uses tag_offset to index the integrity metadata for each crypt sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE, dm-crypt will try to continue the crypt/decrypt procedure in a kworker. However, it resets tag_offset as zero instead of using the tag_offset related with current sector. It may return unexpected data when using random IV or return unexpected integrity related error. Fix the problem by tracking tag_offset in per-IO convert_context. Therefore, when the crypt/decrypt procedure continues in a kworker, it could use the next tag_offset saved in convert_context. Fixes: 8abec36d1274 ("dm crypt: do not wait for backlogged crypto request completion in softirq") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:51 +08:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
tree-wide: use reinit_completion instead of INIT_COMPLETION Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14 14:32:02 -08:00
treewide: Use fallthrough pseudo-keyword Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
dm crypt: add comments to better describe crypto processing logic A crypto driver can process requests synchronously or asynchronously and can use an internal driver queue to backlog requests. Add some comments to clarify internal logic and completion return codes. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-15 17:00:25 +02:00
Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY" This reverts Linux 4.1-rc1 commit 0618764cb25f6fa9fb31152995de42a8a0496475. The problem which that commit attempts to fix actually lies in the Freescale CAAM crypto driver not dm-crypt. dm-crypt uses CRYPTO_TFM_REQ_MAY_BACKLOG. This means the the crypto driver should internally backlog requests which arrive when the queue is full and process them later. Until the crypto hw's queue becomes full, the driver returns -EINPROGRESS. When the crypto hw's queue if full, the driver returns -EBUSY, and if CRYPTO_TFM_REQ_MAY_BACKLOG is set, is expected to backlog the request and process it when the hardware has queue space. At the point when the driver takes the request from the backlog and starts processing it, it calls the completion function with a status of -EINPROGRESS. The completion function is called (for a second time, in the case of backlogged requests) with a status/err of 0 when a request is done. Crypto drivers for hardware without hardware queueing use the helpers, crypto_init_queue(), crypto_enqueue_request(), crypto_dequeue_request() and crypto_get_backlog() helpers to implement this behaviour correctly, while others implement this behaviour without these helpers (ccp, for example). dm-crypt (before the patch that needs reverting) uses this API correctly. It queues up as many requests as the hw queues will allow (i.e. as long as it gets back -EINPROGRESS from the request function). Then, when it sees at least one backlogged request (gets -EBUSY), it waits till that backlogged request is handled (completion gets called with -EINPROGRESS), and then continues. The references to af_alg_wait_for_completion() and af_alg_complete() in that commit's commit message are irrelevant because those functions only handle one request at a time, unlink dm-crypt. The problem is that the Freescale CAAM driver, which that commit describes as having being tested with, fails to implement the backlogging behaviour correctly. In cam_jr_enqueue(), if the hardware queue is full, it simply returns -EBUSY without backlogging the request. What the observed deadlock was is not described in the commit message but it is obviously the wait_for_completion() in crypto_convert() where dm-crypto would wait for the completion being called with -EINPROGRESS in the case of backlogged requests. This completion will never be completed due to the bug in the CAAM driver. Commit 0618764cb25 incorrectly made dm-crypt wait for every request, even when the driver/hardware queues are not full, which means that dm-crypt will never see -EBUSY. This means that that commit will cause a performance regression on all crypto drivers which implement the API correctly. Revert it. Correct backlog handling should be implemented in the CAAM driver instead. Cc'ing stable purely because commit 0618764cb25 did. If for some reason a stable@ kernel did pick up commit 0618764cb25 it should get reverted. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Reviewed-by: Horia Geanta <horia.geanta@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-05 15:15:56 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: track tag_offset in convert_context dm-crypt uses tag_offset to index the integrity metadata for each crypt sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE, dm-crypt will try to continue the crypt/decrypt procedure in a kworker. However, it resets tag_offset as zero instead of using the tag_offset related with current sector. It may return unexpected data when using random IV or return unexpected integrity related error. Fix the problem by tracking tag_offset in per-IO convert_context. Therefore, when the crypt/decrypt procedure continues in a kworker, it could use the next tag_offset saved in convert_context. Fixes: 8abec36d1274 ("dm crypt: do not wait for backlogged crypto request completion in softirq") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:51 +08:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add comments to better describe crypto processing logic A crypto driver can process requests synchronously or asynchronously and can use an internal driver queue to backlog requests. Add some comments to clarify internal logic and completion return codes. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-15 17:00:25 +02:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm-crypt: track tag_offset in convert_context dm-crypt uses tag_offset to index the integrity metadata for each crypt sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE, dm-crypt will try to continue the crypt/decrypt procedure in a kworker. However, it resets tag_offset as zero instead of using the tag_offset related with current sector. It may return unexpected data when using random IV or return unexpected integrity related error. Fix the problem by tracking tag_offset in per-IO convert_context. Therefore, when the crypt/decrypt procedure continues in a kworker, it could use the next tag_offset saved in convert_context. Fixes: 8abec36d1274 ("dm crypt: do not wait for backlogged crypto request completion in softirq") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:51 +08:00
dm crypt: add flags to optionally bypass kcryptd workqueues This is a follow up to [1] that detailed latency problems associated with dm-crypt's use of workqueues when processing IO. Current dm-crypt implementation creates a significant IO performance overhead (at least on small IO block sizes) for both latency and throughput. We suspect offloading IO request processing into workqueues and async threads is more harmful these days with the modern fast storage. I also did some digging into the dm-crypt git history and much of this async processing is not needed anymore, because the reasons it was added are mostly gone from the kernel. More details can be found in [2] (see "Git archeology" section). This change adds DM_CRYPT_NO_READ_WORKQUEUE and DM_CRYPT_NO_WRITE_WORKQUEUE flags for read and write BIOs, which direct dm-crypt to not offload crypto operations into kcryptd workqueues. In addition, writes are not buffered to be sorted in the dm-crypt red-black tree, but dispatched immediately. For cases, where crypto operations cannot happen (hard interrupt context, for example the read path of some NVME drivers), we offload the work to a tasklet rather than a workqueue. These flags only ensure no async BIO processing in the dm-crypt module. It is worth noting that some Crypto API implementations may offload encryption into their own workqueues, which are independent of the dm-crypt and its configuration. However upon enabling these new flags dm-crypt will instruct Crypto API not to backlog crypto requests. To give an idea of the performance gains for certain workloads, consider the script, and results when tested against various devices, detailed here: https://www.redhat.com/archives/dm-devel/2020-July/msg00138.html [1]: https://www.spinics.net/lists/dm-crypt/msg07516.html [2]: https://blog.cloudflare.com/speeding-up-linux-disk-encryption/ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-06 18:37:31 +01:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: don't allocate pages for a partial request Change crypt_alloc_buffer so that it only ever allocates pages for a full request. This is a prerequisite for the commit "dm crypt: offload writes to thread". This change simplifies the dm-crypt code at the expense of reduced throughput in low memory conditions (where allocation for a partial request is most useful). Note: the next commit ("dm crypt: avoid deadlock in mempools") is needed to fix a theoretical deadlock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:52 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm-crypt: stop constraining max_segment_size to PAGE_SIZE This change effectively reverts commit 586b286b110e ("dm crypt: constrain crypt device's max_segment_size to PAGE_SIZE") and relies on block core's late bio-splitting to ensure that dm-crypt's encryption bios are split accordingly if they exceed the underlying device's limits (e.g. max_segment_size). Commit 586b286b110e was applied as a 4.3 fix for the benefit of stable@ kernels 4.0+ just after block core's late bio-splitting was introduced in 4.3 with commit 54efd50bfd873 ("block: make generic_make_request handle arbitrarily sized bios"). Given block core's late bio-splitting it is past time that dm-crypt make use of it. Also, given the recent need to revert meaningful progress that was attempted during the 6.9 merge window (see commit bff4b74625fe Revert "dm: use queue_limits_set") this change allows DM core to safely make use of queue_limits_set() without risk of breaking dm-crypt on NVMe. Though it should be noted this commit isn't a prereq for reinstating DM core's use of queue_limits_set() because blk_validate_limits() was made less strict with commit b561ea56a264 ("block: allow device to have both virt_boundary_mask and max segment size"). Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-11 15:08:05 -04:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has changed the definition of MAX_ORDER to be inclusive. This has caused issues with code that was not yet upstream and depended on the previous definition. To draw attention to the altered meaning of the define, rename MAX_ORDER to MAX_PAGE_ORDER. Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-28 17:47:04 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 16:28:21 -08:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
block: pass a block_device and opf to bio_alloc_bioset Pass the block_device and operation that we plan to use this bio for to bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Also move the gfp_mask argument after the nr_vecs argument for a much more logical calling convention matching what most of the kernel does. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:11:03 +01:00
dm-crypt: remove clone_init Just open code it next to the bio allocations, which saves a few lines of code, prepares for future changes and allows to remove the duplicate bi_opf assignment for the bio_clone_fast case in kcryptd_io_read. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220124091107.642561-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:10:54 +01:00
dm crypt: Fix IO priority lost when queuing write bios Since dm-crypt queues writes to a different kernel thread (workqueue), the bios will dispatch from tasks with different io_context->ioprio settings and blkcg than the submitting task, thus giving incorrect ioprio to the io scheduler. Get the original IO priority setting via struct dm_crypt_io::base_bio and set this priority in the bio for write. Link: https://lore.kernel.org/dm-devel/alpine.LRH.2.11.1612141049250.13402@mail.ewheeler.net Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-24 13:35:56 +08:00
dm-crypt: fully initialize clone->bi_iter in crypt_alloc_buffer() Both kcryptd_io_read() and kcryptd_crypt_write_convert() will invoke crypt_alloc_buffer() to allocate a new bio. Both of these two callers initialize bi_iter.bi_sector for the new bio separatedly after crypt_alloc_buffer() returns. However, kcryptd_crypt_write_convert() will copy the bi_iter of the new bio into ctx.iter_out or ctx.iter_in. Although it doesn't incur any harm now, it is better to fully initialize bi_iter before it is used. Therefore, initialize bi_iter.bi_sector in crypt_alloc_buffer() instead. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:47 +08:00
[PATCH] dm crypt: use private biosets In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:40 -07:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
dm crypt: account large pages in cc->n_allocated_pages The commit 5054e778fcd9c ("dm crypt: allocate compound pages if possible") changed dm-crypt to use compound pages to improve performance. Unfortunately, there was an oversight: the allocation of compound pages was not accounted at all. Normal pages are accounted in a percpu counter cc->n_allocated_pages and dm-crypt is limited to allocate at most 2% of memory. Because compound pages were not accounted at all, dm-crypt could allocate memory over the 2% limit. Fix this by adding the accounting of compound pages, so that memory consumption of dm-crypt is properly limited. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 5054e778fcd9c ("dm crypt: allocate compound pages if possible") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-10-31 19:12:54 +01:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
dm crypt: account large pages in cc->n_allocated_pages The commit 5054e778fcd9c ("dm crypt: allocate compound pages if possible") changed dm-crypt to use compound pages to improve performance. Unfortunately, there was an oversight: the allocation of compound pages was not accounted at all. Normal pages are accounted in a percpu counter cc->n_allocated_pages and dm-crypt is limited to allocate at most 2% of memory. Because compound pages were not accounted at all, dm-crypt could allocate memory over the 2% limit. Fix this by adding the accounting of compound pages, so that memory consumption of dm-crypt is properly limited. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 5054e778fcd9c ("dm crypt: allocate compound pages if possible") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-10-31 19:12:54 +01:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
dm crypt: account large pages in cc->n_allocated_pages The commit 5054e778fcd9c ("dm crypt: allocate compound pages if possible") changed dm-crypt to use compound pages to improve performance. Unfortunately, there was an oversight: the allocation of compound pages was not accounted at all. Normal pages are accounted in a percpu counter cc->n_allocated_pages and dm-crypt is limited to allocate at most 2% of memory. Because compound pages were not accounted at all, dm-crypt could allocate memory over the 2% limit. Fix this by adding the accounting of compound pages, so that memory consumption of dm-crypt is properly limited. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 5054e778fcd9c ("dm crypt: allocate compound pages if possible") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-10-31 19:12:54 +01:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 16:28:21 -08:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: bio_alloc can't fail if it is allowed to sleep Remove handling of NULL returns from sleeping bio_alloc calls given that those can't fail. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220124091107.642561-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:10:53 +01:00
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 16:28:21 -08:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Fix memory leak in dm-crypt dm-crypt used the ->bi_size member in the bio endio handling to free the appropriate pages, but it frees all of it from both call paths. With the ->bi_end_io() changes, ->bi_size was always 0 since we don't do partial completes. This caused dm-crypt to leak memory. Fix this by removing the size argument from crypt_free_buffer_pages(). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 13:48:46 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
dm crypt: account large pages in cc->n_allocated_pages The commit 5054e778fcd9c ("dm crypt: allocate compound pages if possible") changed dm-crypt to use compound pages to improve performance. Unfortunately, there was an oversight: the allocation of compound pages was not accounted at all. Normal pages are accounted in a percpu counter cc->n_allocated_pages and dm-crypt is limited to allocate at most 2% of memory. Because compound pages were not accounted at all, dm-crypt could allocate memory over the 2% limit. Fix this by adding the accounting of compound pages, so that memory consumption of dm-crypt is properly limited. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 5054e778fcd9c ("dm crypt: allocate compound pages if possible") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-10-31 19:12:54 +01:00
dm-crypt: use folio_nr_pages() instead of shift operation folio_nr_pages() is a faster helper function to get the number of pages when NR_PAGES_IN_LARGE_FOLIO is enabled. Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-10-04 00:19:12 -03:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
dm crypt: account large pages in cc->n_allocated_pages The commit 5054e778fcd9c ("dm crypt: allocate compound pages if possible") changed dm-crypt to use compound pages to improve performance. Unfortunately, there was an oversight: the allocation of compound pages was not accounted at all. Normal pages are accounted in a percpu counter cc->n_allocated_pages and dm-crypt is limited to allocate at most 2% of memory. Because compound pages were not accounted at all, dm-crypt could allocate memory over the 2% limit. Fix this by adding the accounting of compound pages, so that memory consumption of dm-crypt is properly limited. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 5054e778fcd9c ("dm crypt: allocate compound pages if possible") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-10-31 19:12:54 +01:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
dm crypt: account large pages in cc->n_allocated_pages The commit 5054e778fcd9c ("dm crypt: allocate compound pages if possible") changed dm-crypt to use compound pages to improve performance. Unfortunately, there was an oversight: the allocation of compound pages was not accounted at all. Normal pages are accounted in a percpu counter cc->n_allocated_pages and dm-crypt is limited to allocate at most 2% of memory. Because compound pages were not accounted at all, dm-crypt could allocate memory over the 2% limit. Fix this by adding the accounting of compound pages, so that memory consumption of dm-crypt is properly limited. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 5054e778fcd9c ("dm crypt: allocate compound pages if possible") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-10-31 19:12:54 +01:00
dm crypt: allocate compound pages if possible It was reported that allocating pages for the write buffer in dm-crypt causes measurable overhead [1]. Change dm-crypt to allocate compound pages if they are available. If not, fall back to the mempool. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053284.html Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-01 09:19:17 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: use per-bio data Change dm-crypt so that it uses auxiliary data allocated with the bio. Dm-crypt requires two allocations per request - struct dm_crypt_io and struct ablkcipher_request (with other data appended to it). It previously only used mempool allocations. Some requests may require more dm_crypt_ios and ablkcipher_requests, however most requests need just one of each of these two structures to complete. This patch changes it so that the first dm_crypt_io and ablkcipher_request are allocated with the bio (using target per_bio_data_size option). If the request needs additional values, they are allocated from the mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-28 15:51:55 -04:00
dm crypt: tidy crypt alloc Factor out crypt io allocation code. Later patches will call it from another place. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:03 +01:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: tidy crypt alloc Factor out crypt io allocation code. Later patches will call it from another place. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:03 +01:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: tidy crypt alloc Factor out crypt io allocation code. Later patches will call it from another place. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:03 +01:00
dm crypt: tidy inc pending Move io pending to one place. No functional change, usefull to simplify debugging. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:02 +01:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: tidy inc pending Move io pending to one place. No functional change, usefull to simplify debugging. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:02 +01:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: wait for endio to complete before destruction The following oops has been reported when dm-crypt runs over a loop device. ... [ 70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000) ... [ 70.381058] Call Trace: [ 70.381058] [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt] [ 70.381058] [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt] [ 70.381058] [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod] [ 70.381058] [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod] [ 70.381058] [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<c02bad86>] ? loop_thread+0x380/0x3b7 [ 70.381058] [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165 [ 70.381058] [<c013754f>] ? autoremove_wake_function+0x0/0x33 [ 70.381058] [<c02baa06>] ? loop_thread+0x0/0x3b7 When a table is being replaced, it waits for I/O to complete before destroying the mempool, but the endio function doesn't call mempool_free() until after completing the bio. Fix it by swapping the order of those two operations. The same problem occurs in dm.c with md referenced after dec_pending. Again, we swap the order. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:36 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: wait for endio to complete before destruction The following oops has been reported when dm-crypt runs over a loop device. ... [ 70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000) ... [ 70.381058] Call Trace: [ 70.381058] [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt] [ 70.381058] [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt] [ 70.381058] [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod] [ 70.381058] [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod] [ 70.381058] [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<c02bad86>] ? loop_thread+0x380/0x3b7 [ 70.381058] [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165 [ 70.381058] [<c013754f>] ? autoremove_wake_function+0x0/0x33 [ 70.381058] [<c02baa06>] ? loop_thread+0x0/0x3b7 When a table is being replaced, it waits for I/O to complete before destroying the mempool, but the endio function doesn't call mempool_free() until after completing the bio. Fix it by swapping the order of those two operations. The same problem occurs in dm.c with md referenced after dec_pending. Again, we swap the order. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:36 +00:00
dm-crypt: fix a tiny race condition in crypt_dec_pending crypt_dec_pending reads io->error before calling atomic_dec_and_test. Another context, for example crypt_endio called from an interrupt, may set io->error and drop its reference between the read and the decrement. crypt_dec_pending then drops the last reference and completes the bio with the stale status - so a read that failed and was never decrypted, or a write that failed, is reported as successful. The read was placed before the decrement by commit b35f8caa0890 ("dm crypt: wait for endio to complete before destruction"), because that commit freed dm_crypt_io before calling bio_endio. This is no longer the case, dm_crypt_io lives in the per-bio data now. Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is fully ordered, so no additional barrier is needed. Fixes: b35f8caa0890 ("dm crypt: wait for endio to complete before destruction") Cc: stable@vger.kernel.org Reviewed-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev> Signed-off-by: Ben Cressey <ben@cressey.dev> Assisted-by: Claude:unspecified Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-08-26 00:25:33 +00:00
dm crypt: do not call bio_endio() from the dm-crypt tasklet Sometimes, when dm-crypt executes decryption in a tasklet, we may get "BUG: KASAN: use-after-free in tasklet_action_common.constprop..." with a kasan-enabled kernel. When the decryption fully completes in the tasklet, dm-crypt will call bio_endio(), which in turn will call clone_endio() from dm.c core code. That function frees the resources associated with the bio, including per bio private structures. For dm-crypt it will free the current struct dm_crypt_io, which contains our tasklet object, causing use-after-free, when the tasklet is being dequeued by the kernel. To avoid this, do not call bio_endio() from the current tasklet context, but delay its execution to the dm-crypt IO workqueue. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: <stable@vger.kernel.org> # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-09 15:17:06 +00:00
dm crypt: avoid accessing uninitialized tasklet When neither "no_read_workqueue" nor "no_write_workqueue" are enabled, tasklet_trylock() in crypt_dec_pending() may still return false due to an uninitialized state, and dm-crypt will unnecessarily do io completion in io_queue workqueue instead of current context. Fix this by adding an 'in_tasklet' flag to dm_crypt_io struct and initialize it to false in crypt_io_init(). Set this flag to true in kcryptd_queue_crypt() before calling tasklet_schedule(). If set crypt_dec_pending() will punt io completion to a workqueue. This also nicely avoids the tasklet_trylock/unlock hack when tasklets aren't in use. Fixes: 8e14f610159d ("dm crypt: do not call bio_endio() from the dm-crypt tasklet") Cc: stable@vger.kernel.org Reported-by: Hou Tao <houtao1@huawei.com> Suggested-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-03-08 14:39:54 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: move io to workqueue This patch is designed to help dm-crypt comply with the new constraints imposed by the following patch in -mm: md-dm-reduce-stack-usage-with-stacked-block-devices.patch Under low memory the existing implementation relies upon waiting for I/O submitted recursively to generic_make_request() completing before the original generic_make_request() call can return. This patch moves the I/O submission to a workqueue so the original generic_make_request() can return immediately. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:39 -07:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm: use kmem_cache macro Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 17:26:32 +01:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Drop 'size' argument from bio_endio and bi_end_io As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-27 12:47:43 +02:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
Fix memory leak in dm-crypt dm-crypt used the ->bi_size member in the bio endio handling to free the appropriate pages, but it frees all of it from both call paths. With the ->bi_end_io() changes, ->bi_size was always 0 since we don't do partial completes. This caused dm-crypt to leak memory. Fix this by removing the size argument from crypt_free_buffer_pages(). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 13:48:46 +02:00
dm crypt: tidy crypt_endio Simplify crypt_endio function. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:46 +00:00
block: don't access bio->bi_error after bio_put() Commit 4246a0b6 ("block: add a bi_error field to struct bio") has added a few dereferences of 'bio' after a call to bio_put(). This causes use-after-frees such as: [521120.719695] BUG: KASan: use after free in dio_bio_complete+0x2b3/0x320 at addr ffff880f36b38714 [521120.720638] Read of size 4 by task mount.ocfs2/9644 [521120.721212] ============================================================================= [521120.722056] BUG kmalloc-256 (Not tainted): kasan: bad access detected [521120.722968] ----------------------------------------------------------------------------- [521120.722968] [521120.723915] Disabling lock debugging due to kernel taint [521120.724539] INFO: Slab 0xffffea003cdace00 objects=32 used=25 fp=0xffff880f36b38600 flags=0x46fffff80004080 [521120.726037] INFO: Object 0xffff880f36b38700 @offset=1792 fp=0xffff880f36b38800 [521120.726037] [521120.726974] Bytes b4 ffff880f36b386f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.727898] Object ffff880f36b38700: 00 88 b3 36 0f 88 ff ff 00 00 d8 de 0b 88 ff ff ...6............ [521120.728822] Object ffff880f36b38710: 02 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.729705] Object ffff880f36b38720: 01 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 ................ [521120.730623] Object ffff880f36b38730: 00 00 00 00 00 00 00 00 01 00 00 00 00 02 00 00 ................ [521120.731621] Object ffff880f36b38740: 00 02 00 00 01 00 00 00 d0 f7 87 ad ff ff ff ff ................ [521120.732776] Object ffff880f36b38750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.733640] Object ffff880f36b38760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.734508] Object ffff880f36b38770: 01 00 03 00 01 00 00 00 88 87 b3 36 0f 88 ff ff ...........6.... [521120.735385] Object ffff880f36b38780: 00 73 22 ad 02 88 ff ff 40 13 e0 3c 00 ea ff ff .s".....@..<.... [521120.736667] Object ffff880f36b38790: 00 02 00 00 00 04 00 00 00 00 00 00 00 00 00 00 ................ [521120.737596] Object ffff880f36b387a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.738524] Object ffff880f36b387b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.739388] Object ffff880f36b387c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.740277] Object ffff880f36b387d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.741187] Object ffff880f36b387e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.742233] Object ffff880f36b387f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.743229] CPU: 41 PID: 9644 Comm: mount.ocfs2 Tainted: G B 4.2.0-rc6-next-20150810-sasha-00039-gf909086 #2420 [521120.744274] ffff880f36b38000 ffff880d89c8f638 ffffffffb6e9ba8a ffff880101c0e5c0 [521120.745025] ffff880d89c8f668 ffffffffad76a313 ffff880101c0e5c0 ffffea003cdace00 [521120.745908] ffff880f36b38700 ffff880f36b38798 ffff880d89c8f690 ffffffffad772854 [521120.747063] Call Trace: [521120.747520] dump_stack (lib/dump_stack.c:52) [521120.748053] print_trailer (mm/slub.c:653) [521120.748582] object_err (mm/slub.c:660) [521120.749079] kasan_report_error (include/linux/kasan.h:20 mm/kasan/report.c:152 mm/kasan/report.c:194) [521120.750834] __asan_report_load4_noabort (mm/kasan/report.c:250) [521120.753580] dio_bio_complete (fs/direct-io.c:478) [521120.755752] do_blockdev_direct_IO (fs/direct-io.c:494 fs/direct-io.c:1291) [521120.759765] __blockdev_direct_IO (fs/direct-io.c:1322) [521120.761658] blkdev_direct_IO (fs/block_dev.c:162) [521120.762993] generic_file_read_iter (mm/filemap.c:1738) [521120.767405] blkdev_read_iter (fs/block_dev.c:1649) [521120.768556] __vfs_read (fs/read_write.c:423 fs/read_write.c:434) [521120.772126] vfs_read (fs/read_write.c:454) [521120.773118] SyS_pread64 (fs/read_write.c:607 fs/read_write.c:594) [521120.776062] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:186) [521120.777375] Memory state around the buggy address: [521120.778118] ffff880f36b38600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.779211] ffff880f36b38680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.780315] >ffff880f36b38700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.781465] ^ [521120.782083] ffff880f36b38780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.783717] ffff880f36b38800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [521120.784818] ================================================================== This patch fixes a few of those places that I caught while auditing the patch, but the original patch should be audited further for more occurences of this issue since I'm not too familiar with the code. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-10 19:05:18 -04:00
dm crypt: tidy crypt_endio Simplify crypt_endio function. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:46 +00:00
Drop 'size' argument from bio_endio and bi_end_io As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-27 12:47:43 +02:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
block: don't access bio->bi_error after bio_put() Commit 4246a0b6 ("block: add a bi_error field to struct bio") has added a few dereferences of 'bio' after a call to bio_put(). This causes use-after-frees such as: [521120.719695] BUG: KASan: use after free in dio_bio_complete+0x2b3/0x320 at addr ffff880f36b38714 [521120.720638] Read of size 4 by task mount.ocfs2/9644 [521120.721212] ============================================================================= [521120.722056] BUG kmalloc-256 (Not tainted): kasan: bad access detected [521120.722968] ----------------------------------------------------------------------------- [521120.722968] [521120.723915] Disabling lock debugging due to kernel taint [521120.724539] INFO: Slab 0xffffea003cdace00 objects=32 used=25 fp=0xffff880f36b38600 flags=0x46fffff80004080 [521120.726037] INFO: Object 0xffff880f36b38700 @offset=1792 fp=0xffff880f36b38800 [521120.726037] [521120.726974] Bytes b4 ffff880f36b386f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.727898] Object ffff880f36b38700: 00 88 b3 36 0f 88 ff ff 00 00 d8 de 0b 88 ff ff ...6............ [521120.728822] Object ffff880f36b38710: 02 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.729705] Object ffff880f36b38720: 01 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 ................ [521120.730623] Object ffff880f36b38730: 00 00 00 00 00 00 00 00 01 00 00 00 00 02 00 00 ................ [521120.731621] Object ffff880f36b38740: 00 02 00 00 01 00 00 00 d0 f7 87 ad ff ff ff ff ................ [521120.732776] Object ffff880f36b38750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.733640] Object ffff880f36b38760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.734508] Object ffff880f36b38770: 01 00 03 00 01 00 00 00 88 87 b3 36 0f 88 ff ff ...........6.... [521120.735385] Object ffff880f36b38780: 00 73 22 ad 02 88 ff ff 40 13 e0 3c 00 ea ff ff .s".....@..<.... [521120.736667] Object ffff880f36b38790: 00 02 00 00 00 04 00 00 00 00 00 00 00 00 00 00 ................ [521120.737596] Object ffff880f36b387a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.738524] Object ffff880f36b387b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.739388] Object ffff880f36b387c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.740277] Object ffff880f36b387d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.741187] Object ffff880f36b387e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.742233] Object ffff880f36b387f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.743229] CPU: 41 PID: 9644 Comm: mount.ocfs2 Tainted: G B 4.2.0-rc6-next-20150810-sasha-00039-gf909086 #2420 [521120.744274] ffff880f36b38000 ffff880d89c8f638 ffffffffb6e9ba8a ffff880101c0e5c0 [521120.745025] ffff880d89c8f668 ffffffffad76a313 ffff880101c0e5c0 ffffea003cdace00 [521120.745908] ffff880f36b38700 ffff880f36b38798 ffff880d89c8f690 ffffffffad772854 [521120.747063] Call Trace: [521120.747520] dump_stack (lib/dump_stack.c:52) [521120.748053] print_trailer (mm/slub.c:653) [521120.748582] object_err (mm/slub.c:660) [521120.749079] kasan_report_error (include/linux/kasan.h:20 mm/kasan/report.c:152 mm/kasan/report.c:194) [521120.750834] __asan_report_load4_noabort (mm/kasan/report.c:250) [521120.753580] dio_bio_complete (fs/direct-io.c:478) [521120.755752] do_blockdev_direct_IO (fs/direct-io.c:494 fs/direct-io.c:1291) [521120.759765] __blockdev_direct_IO (fs/direct-io.c:1322) [521120.761658] blkdev_direct_IO (fs/block_dev.c:162) [521120.762993] generic_file_read_iter (mm/filemap.c:1738) [521120.767405] blkdev_read_iter (fs/block_dev.c:1649) [521120.768556] __vfs_read (fs/read_write.c:423 fs/read_write.c:434) [521120.772126] vfs_read (fs/read_write.c:454) [521120.773118] SyS_pread64 (fs/read_write.c:607 fs/read_write.c:594) [521120.776062] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:186) [521120.777375] Memory state around the buggy address: [521120.778118] ffff880f36b38600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.779211] ffff880f36b38680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.780315] >ffff880f36b38700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.781465] ^ [521120.782083] ffff880f36b38780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.783717] ffff880f36b38800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [521120.784818] ================================================================== This patch fixes a few of those places that I caught while auditing the patch, but the original patch should be audited further for more occurences of this issue since I'm not too familiar with the code. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-10 19:05:18 -04:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: use dm_submit_bio_remap Care was taken to support kcryptd_io_read being called from crypt_map or workqueue. Use of an intermediate CRYPT_MAP_READ_GFP gfp_t (defined as GFP_NOWAIT) should protect from maintenance burden if that flag were to change for some reason. Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-02-17 23:40:35 -05:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
block: pass a block_device to bio_clone_fast Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 17:01:09 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
block: pass a block_device to bio_clone_fast Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 17:01:09 +01:00
block: remove per-queue plugging Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm-crypt: fully initialize clone->bi_iter in crypt_alloc_buffer() Both kcryptd_io_read() and kcryptd_crypt_write_convert() will invoke crypt_alloc_buffer() to allocate a new bio. Both of these two callers initialize bi_iter.bi_sector for the new bio separatedly after crypt_alloc_buffer() returns. However, kcryptd_crypt_write_convert() will copy the bi_iter of the new bio into ctx.iter_out or ctx.iter_in. Although it doesn't incur any harm now, it is better to fully initialize bi_iter before it is used. Therefore, initialize bi_iter.bi_sector in crypt_alloc_buffer() instead. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:47 +08:00
dm-crypt: remove clone_init Just open code it next to the bio allocations, which saves a few lines of code, prepares for future changes and allows to remove the duplicate bi_opf assignment for the bio_clone_fast case in kcryptd_io_read. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220124091107.642561-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24 10:10:54 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: simplify dm_sumbit_bio_remap interface Remove the from_wq argument from dm_sumbit_bio_remap(). Eliminates the need for dm_sumbit_bio_remap() callers to know whether they are calling for a workqueue or from the original dm_submit_bio(). Add map_task to dm_io struct, record the map_task in alloc_io and clear it after all target ->map() calls have completed. Update dm_sumbit_bio_remap to check if 'current' matches io->map_task rather than rely on passed 'from_rq' argument. This change really simplifies the chore of porting each DM target to using dm_sumbit_bio_remap() because there is no longer the risk of programming error by not completely knowing all the different contexts a particular method that calls dm_sumbit_bio_remap() might be used in. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-03-10 11:45:58 -05:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm: simplify dm_sumbit_bio_remap interface Remove the from_wq argument from dm_sumbit_bio_remap(). Eliminates the need for dm_sumbit_bio_remap() callers to know whether they are calling for a workqueue or from the original dm_submit_bio(). Add map_task to dm_io struct, record the map_task in alloc_io and clear it after all target ->map() calls have completed. Update dm_sumbit_bio_remap to check if 'current' matches io->map_task rather than rely on passed 'from_rq' argument. This change really simplifies the chore of porting each DM target to using dm_sumbit_bio_remap() because there is no longer the risk of programming error by not completely knowing all the different contexts a particular method that calls dm_sumbit_bio_remap() might be used in. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-03-10 11:45:58 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: use wake_up_process() instead of a wait queue This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-11 12:10:51 -04:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: fix crash on exit As the documentation for kthread_stop() says, "if threadfn() may call do_exit() itself, the caller must ensure task_struct can't go away". dm-crypt does not ensure this and therefore crashes when crypt_dtr() calls kthread_stop(). The crash is trivially reproducible by adding a delay before the call to kthread_stop() and just opening and closing a dm-crypt device. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 533 Comm: cryptsetup Not tainted 4.8.0-rc7+ #7 task: ffff88003bd0df40 task.stack: ffff8800375b4000 RIP: 0010: kthread_stop+0x52/0x300 Call Trace: crypt_dtr+0x77/0x120 dm_table_destroy+0x6f/0x120 __dm_destroy+0x130/0x250 dm_destroy+0x13/0x20 dev_remove+0xe6/0x120 ? dev_suspend+0x250/0x250 ctl_ioctl+0x1fc/0x530 ? __lock_acquire+0x24f/0x1b10 dm_ctl_ioctl+0x13/0x20 do_vfs_ioctl+0x91/0x6a0 ? ____fput+0xe/0x10 ? entry_SYSCALL_64_fastpath+0x5/0xbd ? trace_hardirqs_on_caller+0x151/0x1e0 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1f/0xbd This problem was introduced by bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit"). Looking at the description of that patch (excerpted below), it seems like the problem it addresses can be solved by just using set_current_state instead of __set_current_state, since we obviously need the memory barrier. | dm crypt: fix a possible hang due to race condition on exit | | A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE), | __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop(). | It is possible that the processor reorders memory accesses so that | kthread_should_stop() is executed before __set_current_state(). If | such reordering happens, there is a possible race on thread | termination: [...] So this patch just reverts the aforementioned patch and changes the __set_current_state(TASK_INTERRUPTIBLE) to set_current_state(...). This fixes the crash and should also fix the potential hang. Fixes: bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit") Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-09-21 16:22:29 +02:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: use wake_up_process() instead of a wait queue This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-11 12:10:51 -04:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: fix crash on exit As the documentation for kthread_stop() says, "if threadfn() may call do_exit() itself, the caller must ensure task_struct can't go away". dm-crypt does not ensure this and therefore crashes when crypt_dtr() calls kthread_stop(). The crash is trivially reproducible by adding a delay before the call to kthread_stop() and just opening and closing a dm-crypt device. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 533 Comm: cryptsetup Not tainted 4.8.0-rc7+ #7 task: ffff88003bd0df40 task.stack: ffff8800375b4000 RIP: 0010: kthread_stop+0x52/0x300 Call Trace: crypt_dtr+0x77/0x120 dm_table_destroy+0x6f/0x120 __dm_destroy+0x130/0x250 dm_destroy+0x13/0x20 dev_remove+0xe6/0x120 ? dev_suspend+0x250/0x250 ctl_ioctl+0x1fc/0x530 ? __lock_acquire+0x24f/0x1b10 dm_ctl_ioctl+0x13/0x20 do_vfs_ioctl+0x91/0x6a0 ? ____fput+0xe/0x10 ? entry_SYSCALL_64_fastpath+0x5/0xbd ? trace_hardirqs_on_caller+0x151/0x1e0 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1f/0xbd This problem was introduced by bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit"). Looking at the description of that patch (excerpted below), it seems like the problem it addresses can be solved by just using set_current_state instead of __set_current_state, since we obviously need the memory barrier. | dm crypt: fix a possible hang due to race condition on exit | | A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE), | __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop(). | It is possible that the processor reorders memory accesses so that | kthread_should_stop() is executed before __set_current_state(). If | such reordering happens, there is a possible race on thread | termination: [...] So this patch just reverts the aforementioned patch and changes the __set_current_state(TASK_INTERRUPTIBLE) to set_current_state(...). This fixes the crash and should also fix the potential hang. Fixes: bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit") Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-09-21 16:22:29 +02:00
sched/core: Remove set_task_state() This is a nasty interface and setting the state of a foreign task must not be done. As of the following commit: be628be0956 ("bcache: Make gc wakeup sane, remove set_task_state()") ... everyone in the kernel calls set_task_state() with current, allowing the helper to be removed. However, as the comment indicates, it is still around for those archs where computing current is more expensive than using a pointer, at least in theory. An important arch that is affected is arm64, however this has been addressed now [1] and performance is up to par making no difference with either calls. Of all the callers, if any, it's the locking bits that would care most about this -- ie: we end up passing a tsk pointer to a lot of the lock slowpath, and setting ->state on that. The following numbers are based on two tests: a custom ad-hoc microbenchmark that just measures latencies (for ~65 million calls) between get_task_state() vs get_current_state(). Secondly for a higher overview, an unlink microbenchmark was used, which pounds on a single file with open, close,unlink combos with increasing thread counts (up to 4x ncpus). While the workload is quite unrealistic, it does contend a lot on the inode mutex or now rwsem. [1] https://lkml.kernel.org/r/1483468021-8237-1-git-send-email-mark.rutland@arm.com == 1. x86-64 == Avg runtime set_task_state(): 601 msecs Avg runtime set_current_state(): 552 msecs vanilla dirty Hmean unlink1-processes-2 36089.26 ( 0.00%) 38977.33 ( 8.00%) Hmean unlink1-processes-5 28555.01 ( 0.00%) 29832.55 ( 4.28%) Hmean unlink1-processes-8 37323.75 ( 0.00%) 44974.57 ( 20.50%) Hmean unlink1-processes-12 43571.88 ( 0.00%) 44283.01 ( 1.63%) Hmean unlink1-processes-21 34431.52 ( 0.00%) 38284.45 ( 11.19%) Hmean unlink1-processes-30 34813.26 ( 0.00%) 37975.17 ( 9.08%) Hmean unlink1-processes-48 37048.90 ( 0.00%) 39862.78 ( 7.59%) Hmean unlink1-processes-79 35630.01 ( 0.00%) 36855.30 ( 3.44%) Hmean unlink1-processes-110 36115.85 ( 0.00%) 39843.91 ( 10.32%) Hmean unlink1-processes-141 32546.96 ( 0.00%) 35418.52 ( 8.82%) Hmean unlink1-processes-172 34674.79 ( 0.00%) 36899.21 ( 6.42%) Hmean unlink1-processes-203 37303.11 ( 0.00%) 36393.04 ( -2.44%) Hmean unlink1-processes-224 35712.13 ( 0.00%) 36685.96 ( 2.73%) == 2. ppc64le == Avg runtime set_task_state(): 938 msecs Avg runtime set_current_state: 940 msecs vanilla dirty Hmean unlink1-processes-2 19269.19 ( 0.00%) 30704.50 ( 59.35%) Hmean unlink1-processes-5 20106.15 ( 0.00%) 21804.15 ( 8.45%) Hmean unlink1-processes-8 17496.97 ( 0.00%) 17243.28 ( -1.45%) Hmean unlink1-processes-12 14224.15 ( 0.00%) 17240.21 ( 21.20%) Hmean unlink1-processes-21 14155.66 ( 0.00%) 15681.23 ( 10.78%) Hmean unlink1-processes-30 14450.70 ( 0.00%) 15995.83 ( 10.69%) Hmean unlink1-processes-48 16945.57 ( 0.00%) 16370.42 ( -3.39%) Hmean unlink1-processes-79 15788.39 ( 0.00%) 14639.27 ( -7.28%) Hmean unlink1-processes-110 14268.48 ( 0.00%) 14377.40 ( 0.76%) Hmean unlink1-processes-141 14023.65 ( 0.00%) 16271.69 ( 16.03%) Hmean unlink1-processes-172 13417.62 ( 0.00%) 16067.55 ( 19.75%) Hmean unlink1-processes-203 15293.08 ( 0.00%) 15440.40 ( 0.96%) Hmean unlink1-processes-234 13719.32 ( 0.00%) 16190.74 ( 18.01%) Hmean unlink1-processes-265 16400.97 ( 0.00%) 16115.22 ( -1.74%) Hmean unlink1-processes-296 14388.60 ( 0.00%) 16216.13 ( 12.70%) Hmean unlink1-processes-320 15771.85 ( 0.00%) 15905.96 ( 0.85%) x86-64 (known to be fast for get_current()/this_cpu_read_stable() caching) and ppc64 (with paca) show similar improvements in the unlink microbenches. The small delta for ppc64 (2ms), does not represent the gains on the unlink runs. In the case of x86, there was a decent amount of variation in the latency runs, but always within a 20 to 50ms increase), ppc was more constant. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: mark.rutland@arm.com Link: http://lkml.kernel.org/r/1483479794-14013-5-git-send-email-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-03 13:43:14 -08:00
dm crypt: fix crash on exit As the documentation for kthread_stop() says, "if threadfn() may call do_exit() itself, the caller must ensure task_struct can't go away". dm-crypt does not ensure this and therefore crashes when crypt_dtr() calls kthread_stop(). The crash is trivially reproducible by adding a delay before the call to kthread_stop() and just opening and closing a dm-crypt device. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 533 Comm: cryptsetup Not tainted 4.8.0-rc7+ #7 task: ffff88003bd0df40 task.stack: ffff8800375b4000 RIP: 0010: kthread_stop+0x52/0x300 Call Trace: crypt_dtr+0x77/0x120 dm_table_destroy+0x6f/0x120 __dm_destroy+0x130/0x250 dm_destroy+0x13/0x20 dev_remove+0xe6/0x120 ? dev_suspend+0x250/0x250 ctl_ioctl+0x1fc/0x530 ? __lock_acquire+0x24f/0x1b10 dm_ctl_ioctl+0x13/0x20 do_vfs_ioctl+0x91/0x6a0 ? ____fput+0xe/0x10 ? entry_SYSCALL_64_fastpath+0x5/0xbd ? trace_hardirqs_on_caller+0x151/0x1e0 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1f/0xbd This problem was introduced by bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit"). Looking at the description of that patch (excerpted below), it seems like the problem it addresses can be solved by just using set_current_state instead of __set_current_state, since we obviously need the memory barrier. | dm crypt: fix a possible hang due to race condition on exit | | A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE), | __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop(). | It is possible that the processor reorders memory accesses so that | kthread_should_stop() is executed before __set_current_state(). If | such reordering happens, there is a possible race on thread | termination: [...] So this patch just reverts the aforementioned patch and changes the __set_current_state(TASK_INTERRUPTIBLE) to set_current_state(...). This fixes the crash and should also fix the potential hang. Fixes: bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit") Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-09-21 16:22:29 +02:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: use wake_up_process() instead of a wait queue This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-11 12:10:51 -04:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: use wake_up_process() instead of a wait queue This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-11 12:10:51 -04:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: add cond_resched() to dmcrypt_write() The loop in dmcrypt_write may be running for unbounded amount of time, thus we need cond_resched() in it. This commit fixes the following warning: [ 3391.153255][ C12] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [dmcrypt_write/2:2897] ... [ 3391.387210][ C12] Call trace: [ 3391.390338][ C12] blk_attempt_bio_merge.part.6+0x38/0x158 [ 3391.395970][ C12] blk_attempt_plug_merge+0xc0/0x1b0 [ 3391.401085][ C12] blk_mq_submit_bio+0x398/0x550 [ 3391.405856][ C12] submit_bio_noacct+0x308/0x380 [ 3391.410630][ C12] dmcrypt_write+0x1e4/0x208 [dm_crypt] [ 3391.416005][ C12] kthread+0x130/0x138 [ 3391.419911][ C12] ret_from_fork+0x10/0x18 Reported-by: yangerkun <yangerkun@huawei.com> Fixes: dc2676210c42 ("dm crypt: offload writes to thread") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-03-06 11:17:58 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: move dec_pending on error into write_io_submit Make kcryptd_crypt_write_io_submit() responsible for decrementing the pending count after an error. Also fixes a bug in the async path that forgot to decrement it. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:06 +01:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
block: Convert drivers to immutable biovecs Now that we've got a mechanism for immutable biovecs - bi_iter.bi_bvec_done - we need to convert drivers to use primitives that respect it instead of using the bvec array directly. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: NeilBrown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com
2013-10-11 15:45:43 -07:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: add flags to optionally bypass kcryptd workqueues This is a follow up to [1] that detailed latency problems associated with dm-crypt's use of workqueues when processing IO. Current dm-crypt implementation creates a significant IO performance overhead (at least on small IO block sizes) for both latency and throughput. We suspect offloading IO request processing into workqueues and async threads is more harmful these days with the modern fast storage. I also did some digging into the dm-crypt git history and much of this async processing is not needed anymore, because the reasons it was added are mostly gone from the kernel. More details can be found in [2] (see "Git archeology" section). This change adds DM_CRYPT_NO_READ_WORKQUEUE and DM_CRYPT_NO_WRITE_WORKQUEUE flags for read and write BIOs, which direct dm-crypt to not offload crypto operations into kcryptd workqueues. In addition, writes are not buffered to be sorted in the dm-crypt red-black tree, but dispatched immediately. For cases, where crypto operations cannot happen (hard interrupt context, for example the read path of some NVME drivers), we offload the work to a tasklet rather than a workqueue. These flags only ensure no async BIO processing in the dm-crypt module. It is worth noting that some Crypto API implementations may offload encryption into their own workqueues, which are independent of the dm-crypt and its configuration. However upon enabling these new flags dm-crypt will instruct Crypto API not to backlog crypto requests. To give an idea of the performance gains for certain workloads, consider the script, and results when tested against various devices, detailed here: https://www.redhat.com/archives/dm-devel/2020-July/msg00138.html [1]: https://www.spinics.net/lists/dm-crypt/msg07516.html [2]: https://blog.cloudflare.com/speeding-up-linux-disk-encryption/ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-06 18:37:31 +01:00
dm: simplify dm_sumbit_bio_remap interface Remove the from_wq argument from dm_sumbit_bio_remap(). Eliminates the need for dm_sumbit_bio_remap() callers to know whether they are calling for a workqueue or from the original dm_submit_bio(). Add map_task to dm_io struct, record the map_task in alloc_io and clear it after all target ->map() calls have completed. Update dm_sumbit_bio_remap to check if 'current' matches io->map_task rather than rely on passed 'from_rq' argument. This change really simplifies the chore of porting each DM target to using dm_sumbit_bio_remap() because there is no longer the risk of programming error by not completely knowing all the different contexts a particular method that calls dm_sumbit_bio_remap() might be used in. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-03-10 11:45:58 -05:00
dm crypt: add 'submit_from_crypt_cpus' option Make it possible to disable offloading writes by setting the optional 'submit_from_crypt_cpus' table argument. There are some situations where offloading write bios from the encryption threads to a single thread degrades performance significantly. The default is to offload write bios to the same thread because it benefits CFQ to have writes submitted using the same IO context. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:08 -05:00
dm crypt: use wake_up_process() instead of a wait queue This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-11 12:10:51 -04:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: use wake_up_process() instead of a wait queue This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-11 12:10:51 -04:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
dm-crypt: set atomic as false when calling crypt_convert() in kworker Both kcryptd_crypt_write_continue() and kcryptd_crypt_read_continue() are running in the kworker context, it is OK to call cond_resched(), Therefore, set atomic as false when invoking crypt_convert() under kworker context. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:46 +08:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
dm-crypt: don't update io->sector after kcryptd_crypt_write_io_submit() The updates of io->sector are the leftovers when dm-crypt allocated pages for partial write request. However, since commit cf2f1abfbd0db ("dm crypt: don't allocate pages for a partial request"), there is no partial request anymore. After the introduction of write request rb-tree, the updates of io->sectors may interfere the insertion procedure, because ->sectors of these write requests which have already been added in the rb-tree may be changed during the insertion of new write request. Fix it by removing these buggy updates of io->sectors. Considering these updates only effect the write request rb-tree, the commit which introduces the write request rb-tree is used as the fix tag. Fixes: b3c5fd305249 ("dm crypt: sort writes") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:49 +08:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
dm crypt: tidy write loop pending Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:04 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: tidy ctx pending Move the initialisation of ctx->pending into one place, at the start of crypt_convert(). Introduce crypt_finished to indicate whether or not the encryption is finished, for use in a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: tidy write loop pending Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:04 +01:00
dm-crypt: don't update io->sector after kcryptd_crypt_write_io_submit() The updates of io->sector are the leftovers when dm-crypt allocated pages for partial write request. However, since commit cf2f1abfbd0db ("dm crypt: don't allocate pages for a partial request"), there is no partial request anymore. After the introduction of write request rb-tree, the updates of io->sectors may interfere the insertion procedure, because ->sectors of these write requests which have already been added in the rb-tree may be changed during the insertion of new write request. Fix it by removing these buggy updates of io->sectors. Considering these updates only effect the write request rb-tree, the commit which introduces the write request rb-tree is used as the fix tag. Fixes: b3c5fd305249 ("dm crypt: sort writes") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:49 +08:00
dm crypt: tidy write loop pending Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:04 +01:00
dm crypt: don't allocate pages for a partial request Change crypt_alloc_buffer so that it only ever allocates pages for a full request. This is a prerequisite for the commit "dm crypt: offload writes to thread". This change simplifies the dm-crypt code at the expense of reduced throughput in low memory conditions (where allocation for a partial request is most useful). Note: the next commit ("dm crypt: avoid deadlock in mempools") is needed to fix a theoretical deadlock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:52 -05:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: don't allocate pages for a partial request Change crypt_alloc_buffer so that it only ever allocates pages for a full request. This is a prerequisite for the commit "dm crypt: offload writes to thread". This change simplifies the dm-crypt code at the expense of reduced throughput in low memory conditions (where allocation for a partial request is most useful). Note: the next commit ("dm crypt: avoid deadlock in mempools") is needed to fix a theoretical deadlock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:52 -05:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: tidy io ref counting Make io reference counting more obvious. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:02 +00:00
dm crypt: don't allocate pages for a partial request Change crypt_alloc_buffer so that it only ever allocates pages for a full request. This is a prerequisite for the commit "dm crypt: offload writes to thread". This change simplifies the dm-crypt code at the expense of reduced throughput in low memory conditions (where allocation for a partial request is most useful). Note: the next commit ("dm crypt: avoid deadlock in mempools") is needed to fix a theoretical deadlock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:52 -05:00
dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:30:10 +01:00
dm crypt: don't allocate pages for a partial request Change crypt_alloc_buffer so that it only ever allocates pages for a full request. This is a prerequisite for the commit "dm crypt: offload writes to thread". This change simplifies the dm-crypt code at the expense of reduced throughput in low memory conditions (where allocation for a partial request is most useful). Note: the next commit ("dm crypt: avoid deadlock in mempools") is needed to fix a theoretical deadlock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:52 -05:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: don't allocate pages for a partial request Change crypt_alloc_buffer so that it only ever allocates pages for a full request. This is a prerequisite for the commit "dm crypt: offload writes to thread". This change simplifies the dm-crypt code at the expense of reduced throughput in low memory conditions (where allocation for a partial request is most useful). Note: the next commit ("dm crypt: avoid deadlock in mempools") is needed to fix a theoretical deadlock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:52 -05:00
dm-crypt: don't update io->sector after kcryptd_crypt_write_io_submit() The updates of io->sector are the leftovers when dm-crypt allocated pages for partial write request. However, since commit cf2f1abfbd0db ("dm crypt: don't allocate pages for a partial request"), there is no partial request anymore. After the introduction of write request rb-tree, the updates of io->sectors may interfere the insertion procedure, because ->sectors of these write requests which have already been added in the rb-tree may be changed during the insertion of new write request. Fix it by removing these buggy updates of io->sectors. Considering these updates only effect the write request rb-tree, the commit which introduces the write request rb-tree is used as the fix tag. Fixes: b3c5fd305249 ("dm crypt: sort writes") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:49 +08:00
dm crypt: don't allocate pages for a partial request Change crypt_alloc_buffer so that it only ever allocates pages for a full request. This is a prerequisite for the commit "dm crypt: offload writes to thread". This change simplifies the dm-crypt code at the expense of reduced throughput in low memory conditions (where allocation for a partial request is most useful). Note: the next commit ("dm crypt: avoid deadlock in mempools") is needed to fix a theoretical deadlock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:52 -05:00
dm crypt: tidy io ref counting Make io reference counting more obvious. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:02 +00:00
dm crypt: introduce crypt_write_io_loop Introduce crypt_write_io_loop(). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:59 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
dm-crypt: set atomic as false when calling crypt_convert() in kworker Both kcryptd_crypt_write_continue() and kcryptd_crypt_read_continue() are running in the kworker context, it is OK to call cond_resched(), Therefore, set atomic as false when invoking crypt_convert() under kworker context. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-20 16:29:46 +08:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: tidy inc pending Move io pending to one place. No functional change, usefull to simplify debugging. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:02 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm crypt: do not wait for backlogged crypto request completion in softirq Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04 14:59:47 +00:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm: Remove completion function scaffolding This patch removes the temporary scaffolding now that the comletion function signature has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-06 18:22:34 +08:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm: Remove completion function scaffolding This patch removes the temporary scaffolding now that the comletion function signature has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-06 18:22:34 +08:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: add comments to better describe crypto processing logic A crypto driver can process requests synchronously or asynchronously and can use an internal driver queue to backlog requests. Add some comments to clarify internal logic and completion return codes. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-15 17:00:25 +02:00
Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY" This reverts Linux 4.1-rc1 commit 0618764cb25f6fa9fb31152995de42a8a0496475. The problem which that commit attempts to fix actually lies in the Freescale CAAM crypto driver not dm-crypt. dm-crypt uses CRYPTO_TFM_REQ_MAY_BACKLOG. This means the the crypto driver should internally backlog requests which arrive when the queue is full and process them later. Until the crypto hw's queue becomes full, the driver returns -EINPROGRESS. When the crypto hw's queue if full, the driver returns -EBUSY, and if CRYPTO_TFM_REQ_MAY_BACKLOG is set, is expected to backlog the request and process it when the hardware has queue space. At the point when the driver takes the request from the backlog and starts processing it, it calls the completion function with a status of -EINPROGRESS. The completion function is called (for a second time, in the case of backlogged requests) with a status/err of 0 when a request is done. Crypto drivers for hardware without hardware queueing use the helpers, crypto_init_queue(), crypto_enqueue_request(), crypto_dequeue_request() and crypto_get_backlog() helpers to implement this behaviour correctly, while others implement this behaviour without these helpers (ccp, for example). dm-crypt (before the patch that needs reverting) uses this API correctly. It queues up as many requests as the hw queues will allow (i.e. as long as it gets back -EINPROGRESS from the request function). Then, when it sees at least one backlogged request (gets -EBUSY), it waits till that backlogged request is handled (completion gets called with -EINPROGRESS), and then continues. The references to af_alg_wait_for_completion() and af_alg_complete() in that commit's commit message are irrelevant because those functions only handle one request at a time, unlink dm-crypt. The problem is that the Freescale CAAM driver, which that commit describes as having being tested with, fails to implement the backlogging behaviour correctly. In cam_jr_enqueue(), if the hardware queue is full, it simply returns -EBUSY without backlogging the request. What the observed deadlock was is not described in the commit message but it is obviously the wait_for_completion() in crypto_convert() where dm-crypto would wait for the completion being called with -EINPROGRESS in the case of backlogged requests. This completion will never be completed due to the bug in the CAAM driver. Commit 0618764cb25 incorrectly made dm-crypt wait for every request, even when the driver/hardware queues are not full, which means that dm-crypt will never see -EBUSY. This means that that commit will cause a performance regression on all crypto drivers which implement the API correctly. Revert it. Correct backlog handling should be implemented in the CAAM driver instead. Cc'ing stable purely because commit 0618764cb25 did. If for some reason a stable@ kernel did pick up commit 0618764cb25 it should get reverted. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Reviewed-by: Horia Geanta <horia.geanta@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-05 15:15:56 +02:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY" This reverts Linux 4.1-rc1 commit 0618764cb25f6fa9fb31152995de42a8a0496475. The problem which that commit attempts to fix actually lies in the Freescale CAAM crypto driver not dm-crypt. dm-crypt uses CRYPTO_TFM_REQ_MAY_BACKLOG. This means the the crypto driver should internally backlog requests which arrive when the queue is full and process them later. Until the crypto hw's queue becomes full, the driver returns -EINPROGRESS. When the crypto hw's queue if full, the driver returns -EBUSY, and if CRYPTO_TFM_REQ_MAY_BACKLOG is set, is expected to backlog the request and process it when the hardware has queue space. At the point when the driver takes the request from the backlog and starts processing it, it calls the completion function with a status of -EINPROGRESS. The completion function is called (for a second time, in the case of backlogged requests) with a status/err of 0 when a request is done. Crypto drivers for hardware without hardware queueing use the helpers, crypto_init_queue(), crypto_enqueue_request(), crypto_dequeue_request() and crypto_get_backlog() helpers to implement this behaviour correctly, while others implement this behaviour without these helpers (ccp, for example). dm-crypt (before the patch that needs reverting) uses this API correctly. It queues up as many requests as the hw queues will allow (i.e. as long as it gets back -EINPROGRESS from the request function). Then, when it sees at least one backlogged request (gets -EBUSY), it waits till that backlogged request is handled (completion gets called with -EINPROGRESS), and then continues. The references to af_alg_wait_for_completion() and af_alg_complete() in that commit's commit message are irrelevant because those functions only handle one request at a time, unlink dm-crypt. The problem is that the Freescale CAAM driver, which that commit describes as having being tested with, fails to implement the backlogging behaviour correctly. In cam_jr_enqueue(), if the hardware queue is full, it simply returns -EBUSY without backlogging the request. What the observed deadlock was is not described in the commit message but it is obviously the wait_for_completion() in crypto_convert() where dm-crypto would wait for the completion being called with -EINPROGRESS in the case of backlogged requests. This completion will never be completed due to the bug in the CAAM driver. Commit 0618764cb25 incorrectly made dm-crypt wait for every request, even when the driver/hardware queues are not full, which means that dm-crypt will never see -EBUSY. This means that that commit will cause a performance regression on all crypto drivers which implement the API correctly. Revert it. Correct backlog handling should be implemented in the CAAM driver instead. Cc'ing stable purely because commit 0618764cb25 did. If for some reason a stable@ kernel did pick up commit 0618764cb25 it should get reverted. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Reviewed-by: Horia Geanta <horia.geanta@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-05 15:15:56 +02:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm-crypt: Make crypt_iv_operations::post return void Since all implementations of crypt_iv_operations::post now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-29 13:49:52 -07:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: log aead integrity violations to audit subsystem Since dm-crypt target can be stacked on dm-integrity targets to provide authenticated encryption, integrity violations are recognized here during aead computation. We use the dm-audit submodule to signal those events to user space, too. The construction and destruction of crypt device mappings are also logged as audit events. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-09-04 11:59:30 +02:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: use per-bio data Change dm-crypt so that it uses auxiliary data allocated with the bio. Dm-crypt requires two allocations per request - struct dm_crypt_io and struct ablkcipher_request (with other data appended to it). It previously only used mempool allocations. Some requests may require more dm_crypt_ios and ablkcipher_requests, however most requests need just one of each of these two structures to complete. This patch changes it so that the first dm_crypt_io and ablkcipher_request are allocated with the bio (using target per_bio_data_size option). If the request needs additional values, they are allocated from the mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-28 15:51:55 -04:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY" This reverts Linux 4.1-rc1 commit 0618764cb25f6fa9fb31152995de42a8a0496475. The problem which that commit attempts to fix actually lies in the Freescale CAAM crypto driver not dm-crypt. dm-crypt uses CRYPTO_TFM_REQ_MAY_BACKLOG. This means the the crypto driver should internally backlog requests which arrive when the queue is full and process them later. Until the crypto hw's queue becomes full, the driver returns -EINPROGRESS. When the crypto hw's queue if full, the driver returns -EBUSY, and if CRYPTO_TFM_REQ_MAY_BACKLOG is set, is expected to backlog the request and process it when the hardware has queue space. At the point when the driver takes the request from the backlog and starts processing it, it calls the completion function with a status of -EINPROGRESS. The completion function is called (for a second time, in the case of backlogged requests) with a status/err of 0 when a request is done. Crypto drivers for hardware without hardware queueing use the helpers, crypto_init_queue(), crypto_enqueue_request(), crypto_dequeue_request() and crypto_get_backlog() helpers to implement this behaviour correctly, while others implement this behaviour without these helpers (ccp, for example). dm-crypt (before the patch that needs reverting) uses this API correctly. It queues up as many requests as the hw queues will allow (i.e. as long as it gets back -EINPROGRESS from the request function). Then, when it sees at least one backlogged request (gets -EBUSY), it waits till that backlogged request is handled (completion gets called with -EINPROGRESS), and then continues. The references to af_alg_wait_for_completion() and af_alg_complete() in that commit's commit message are irrelevant because those functions only handle one request at a time, unlink dm-crypt. The problem is that the Freescale CAAM driver, which that commit describes as having being tested with, fails to implement the backlogging behaviour correctly. In cam_jr_enqueue(), if the hardware queue is full, it simply returns -EBUSY without backlogging the request. What the observed deadlock was is not described in the commit message but it is obviously the wait_for_completion() in crypto_convert() where dm-crypto would wait for the completion being called with -EINPROGRESS in the case of backlogged requests. This completion will never be completed due to the bug in the CAAM driver. Commit 0618764cb25 incorrectly made dm-crypt wait for every request, even when the driver/hardware queues are not full, which means that dm-crypt will never see -EBUSY. This means that that commit will cause a performance regression on all crypto drivers which implement the API correctly. Revert it. Correct backlog handling should be implemented in the CAAM driver instead. Cc'ing stable purely because commit 0618764cb25 did. If for some reason a stable@ kernel did pick up commit 0618764cb25 it should get reverted. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Reviewed-by: Horia Geanta <horia.geanta@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-05 15:15:56 +02:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: add flags to optionally bypass kcryptd workqueues This is a follow up to [1] that detailed latency problems associated with dm-crypt's use of workqueues when processing IO. Current dm-crypt implementation creates a significant IO performance overhead (at least on small IO block sizes) for both latency and throughput. We suspect offloading IO request processing into workqueues and async threads is more harmful these days with the modern fast storage. I also did some digging into the dm-crypt git history and much of this async processing is not needed anymore, because the reasons it was added are mostly gone from the kernel. More details can be found in [2] (see "Git archeology" section). This change adds DM_CRYPT_NO_READ_WORKQUEUE and DM_CRYPT_NO_WRITE_WORKQUEUE flags for read and write BIOs, which direct dm-crypt to not offload crypto operations into kcryptd workqueues. In addition, writes are not buffered to be sorted in the dm-crypt red-black tree, but dispatched immediately. For cases, where crypto operations cannot happen (hard interrupt context, for example the read path of some NVME drivers), we offload the work to a tasklet rather than a workqueue. These flags only ensure no async BIO processing in the dm-crypt module. It is worth noting that some Crypto API implementations may offload encryption into their own workqueues, which are independent of the dm-crypt and its configuration. However upon enabling these new flags dm-crypt will instruct Crypto API not to backlog crypto requests. To give an idea of the performance gains for certain workloads, consider the script, and results when tested against various devices, detailed here: https://www.redhat.com/archives/dm-devel/2020-July/msg00138.html [1]: https://www.spinics.net/lists/dm-crypt/msg07516.html [2]: https://blog.cloudflare.com/speeding-up-linux-disk-encryption/ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-06 18:37:31 +01:00
dm crypt: defer decryption to a tasklet if interrupts disabled On some specific hardware on early boot we occasionally get: [ 1193.920255][ T0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 1193.936616][ T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69 [ 1193.953233][ T0] no locks held by swapper/69/0. [ 1193.965871][ T0] irq event stamp: 575062 [ 1193.977724][ T0] hardirqs last enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0 [ 1194.002762][ T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80 [ 1194.029035][ T0] softirqs last enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.054227][ T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.079389][ T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1 [ 1194.104103][ T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020 [ 1194.119591][ T0] Call Trace: [ 1194.130233][ T0] dump_stack+0x9a/0xcc [ 1194.141617][ T0] ___might_sleep.cold+0x180/0x1b0 [ 1194.153825][ T0] mempool_alloc+0x16b/0x300 [ 1194.165313][ T0] ? remove_element+0x160/0x160 [ 1194.176961][ T0] ? blk_mq_end_request+0x4b/0x490 [ 1194.188778][ T0] crypt_convert+0x27f6/0x45f0 [dm_crypt] [ 1194.201024][ T0] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1194.212906][ T0] ? module_assert_mutex_or_preempt+0x3e/0x70 [ 1194.225318][ T0] ? __module_address.part.0+0x1b/0x3a0 [ 1194.237212][ T0] ? is_kernel_percpu_address+0x5b/0x190 [ 1194.249238][ T0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt] [ 1194.261593][ T0] ? is_module_address+0x25/0x40 [ 1194.272905][ T0] ? static_obj+0x8a/0xc0 [ 1194.283582][ T0] ? lockdep_init_map_waits+0x26a/0x700 [ 1194.295570][ T0] ? __raw_spin_lock_init+0x39/0x110 [ 1194.307330][ T0] kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt] [ 1194.320496][ T0] ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt] [ 1194.333203][ T0] blk_update_request+0x6d7/0x1500 [ 1194.344841][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.356831][ T0] blk_mq_end_request+0x4b/0x490 [ 1194.367994][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.379693][ T0] flush_smp_call_function_queue+0x24b/0x560 [ 1194.391847][ T0] flush_smp_call_function_from_idle+0x59/0x80 [ 1194.403969][ T0] do_idle+0x287/0x450 [ 1194.413891][ T0] ? arch_cpu_idle_exit+0x40/0x40 [ 1194.424716][ T0] ? lockdep_hardirqs_on_prepare+0x286/0x3f0 [ 1194.436399][ T0] ? _raw_spin_unlock_irqrestore+0x39/0x40 [ 1194.447759][ T0] cpu_startup_entry+0x19/0x20 [ 1194.458038][ T0] secondary_startup_64_no_verify+0xb0/0xbb IO completion can be queued to a different CPU by the block subsystem as a "call single function/data". The CPU may run these routines from the idle task, but it does so with interrupts disabled. It is not a good idea to do decryption with irqs disabled even in an idle task context, so just defer it to a tasklet (as is done with requests from hard irqs). Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-13 19:17:17 +00:00
dm crypt: use in_hardirq() instead of deprecated in_irq() Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-08-14 09:09:09 +08:00
dm crypt: defer decryption to a tasklet if interrupts disabled On some specific hardware on early boot we occasionally get: [ 1193.920255][ T0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 1193.936616][ T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69 [ 1193.953233][ T0] no locks held by swapper/69/0. [ 1193.965871][ T0] irq event stamp: 575062 [ 1193.977724][ T0] hardirqs last enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0 [ 1194.002762][ T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80 [ 1194.029035][ T0] softirqs last enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.054227][ T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.079389][ T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1 [ 1194.104103][ T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020 [ 1194.119591][ T0] Call Trace: [ 1194.130233][ T0] dump_stack+0x9a/0xcc [ 1194.141617][ T0] ___might_sleep.cold+0x180/0x1b0 [ 1194.153825][ T0] mempool_alloc+0x16b/0x300 [ 1194.165313][ T0] ? remove_element+0x160/0x160 [ 1194.176961][ T0] ? blk_mq_end_request+0x4b/0x490 [ 1194.188778][ T0] crypt_convert+0x27f6/0x45f0 [dm_crypt] [ 1194.201024][ T0] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1194.212906][ T0] ? module_assert_mutex_or_preempt+0x3e/0x70 [ 1194.225318][ T0] ? __module_address.part.0+0x1b/0x3a0 [ 1194.237212][ T0] ? is_kernel_percpu_address+0x5b/0x190 [ 1194.249238][ T0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt] [ 1194.261593][ T0] ? is_module_address+0x25/0x40 [ 1194.272905][ T0] ? static_obj+0x8a/0xc0 [ 1194.283582][ T0] ? lockdep_init_map_waits+0x26a/0x700 [ 1194.295570][ T0] ? __raw_spin_lock_init+0x39/0x110 [ 1194.307330][ T0] kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt] [ 1194.320496][ T0] ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt] [ 1194.333203][ T0] blk_update_request+0x6d7/0x1500 [ 1194.344841][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.356831][ T0] blk_mq_end_request+0x4b/0x490 [ 1194.367994][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.379693][ T0] flush_smp_call_function_queue+0x24b/0x560 [ 1194.391847][ T0] flush_smp_call_function_from_idle+0x59/0x80 [ 1194.403969][ T0] do_idle+0x287/0x450 [ 1194.413891][ T0] ? arch_cpu_idle_exit+0x40/0x40 [ 1194.424716][ T0] ? lockdep_hardirqs_on_prepare+0x286/0x3f0 [ 1194.436399][ T0] ? _raw_spin_unlock_irqrestore+0x39/0x40 [ 1194.447759][ T0] cpu_startup_entry+0x19/0x20 [ 1194.458038][ T0] secondary_startup_64_no_verify+0xb0/0xbb IO completion can be queued to a different CPU by the block subsystem as a "call single function/data". The CPU may run these routines from the idle task, but it does so with interrupts disabled. It is not a good idea to do decryption with irqs disabled even in an idle task context, so just defer it to a tasklet (as is done with requests from hard irqs). Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-13 19:17:17 +00:00
dm-crypt: Convert from tasklet to BH workqueue The only generic interface to execute asynchronously in the BH context is tasklet; however, it's marked deprecated and has some design flaws. To replace tasklets, BH workqueue support was recently added. A BH workqueue behaves similarly to regular workqueues except that the queued work items are executed in the BH context. This commit converts dm-crypt from tasklet to BH workqueue. It backfills tasklet code that was removed with commit 0a9bab391e33 ("dm-crypt, dm-verity: disable tasklets") and tweaks to use BH workqueue. Like a regular workqueue, a BH workqueue allows freeing the currently executing work item. Converting from tasklet to BH workqueue removes the need for deferring bio_endio() again to a work item, which was buggy anyway. I tested this lightly with "--perf-no_read_workqueue --perf-no_write_workqueue" + some code modifications, but would really -appreciate if someone who knows the code base better could take a look. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/82b964f0-c2c8-a2c6-5b1f-f3145dc2c8e5@redhat.com [snitzer: rebase ontop of commit 0a9bab391e33 reduced this commit's changes] Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-29 23:11:54 -10:00
dm-crypt, dm-verity: disable tasklets Tasklets have an inherent problem with memory corruption. The function tasklet_action_common calls tasklet_trylock, then it calls the tasklet callback and then it calls tasklet_unlock. If the tasklet callback frees the structure that contains the tasklet or if it calls some code that may free it, tasklet_unlock will write into free memory. The commits 8e14f610159d and d9a02e016aaf try to fix it for dm-crypt, but it is not a sufficient fix and the data corruption can still happen [1]. There is no fix for dm-verity and dm-verity will write into free memory with every tasklet-processed bio. There will be atomic workqueues implemented in the kernel 6.9 [2]. They will have better interface and they will not suffer from the memory corruption problem. But we need something that stops the memory corruption now and that can be backported to the stable kernels. So, I'm proposing this commit that disables tasklets in both dm-crypt and dm-verity. This commit doesn't remove the tasklet support, because the tasklet code will be reused when atomic workqueues will be implemented. [1] https://lore.kernel.org/all/d390d7ee-f142-44d3-822a-87949e14608b@suse.de/T/ [2] https://lore.kernel.org/lkml/20240130091300.2968534-1-tj@kernel.org/ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: 39d42fa96ba1b ("dm crypt: add flags to optionally bypass kcryptd workqueues") Fixes: 5721d4e5a9cdb ("dm verity: Add optional "try_verify_in_tasklet" feature") Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-31 21:57:27 +01:00
dm crypt: add flags to optionally bypass kcryptd workqueues This is a follow up to [1] that detailed latency problems associated with dm-crypt's use of workqueues when processing IO. Current dm-crypt implementation creates a significant IO performance overhead (at least on small IO block sizes) for both latency and throughput. We suspect offloading IO request processing into workqueues and async threads is more harmful these days with the modern fast storage. I also did some digging into the dm-crypt git history and much of this async processing is not needed anymore, because the reasons it was added are mostly gone from the kernel. More details can be found in [2] (see "Git archeology" section). This change adds DM_CRYPT_NO_READ_WORKQUEUE and DM_CRYPT_NO_WRITE_WORKQUEUE flags for read and write BIOs, which direct dm-crypt to not offload crypto operations into kcryptd workqueues. In addition, writes are not buffered to be sorted in the dm-crypt red-black tree, but dispatched immediately. For cases, where crypto operations cannot happen (hard interrupt context, for example the read path of some NVME drivers), we offload the work to a tasklet rather than a workqueue. These flags only ensure no async BIO processing in the dm-crypt module. It is worth noting that some Crypto API implementations may offload encryption into their own workqueues, which are independent of the dm-crypt and its configuration. However upon enabling these new flags dm-crypt will instruct Crypto API not to backlog crypto requests. To give an idea of the performance gains for certain workloads, consider the script, and results when tested against various devices, detailed here: https://www.redhat.com/archives/dm-devel/2020-July/msg00138.html [1]: https://www.spinics.net/lists/dm-crypt/msg07516.html [2]: https://blog.cloudflare.com/speeding-up-linux-disk-encryption/ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-06 18:37:31 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
treewide: Replace kmalloc with kmalloc_obj for non-scalar types This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-20 23:49:23 -08:00
Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 23:46:04 -08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY set. These drivers allocate memory and thus they are unsuitable for block I/O processing. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-09 23:20:42 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: log the encryption algorithm implementation Log the encryption algorithm's driver name when a dm-crypt target is created. This will help people determine whether the expected implementation is being used. In some cases we've seen people do benchmarks and reject using encryption for performance reasons, when in fact they used a much slower implementation than was possible on the hardware. It can make an enormous difference; e.g., AES-XTS on ARM can be over 10x faster with the crypto extensions than without. It can also be useful to know if an implementation using an external crypto accelerator is being used instead of a software implementation. Example message: [ 29.307629] device-mapper: crypt: xts(aes) using implementation "xts-aes-ce" We've already found the similar message in fs/crypto/keyinfo.c to be very useful. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-05 20:53:00 -08:00
dm crypt: move detailed message into debug level The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance. Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device). Cc: stable@vger.kernel.org Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-15 16:23:43 +02:00
dm crypt: log the encryption algorithm implementation Log the encryption algorithm's driver name when a dm-crypt target is created. This will help people determine whether the expected implementation is being used. In some cases we've seen people do benchmarks and reject using encryption for performance reasons, when in fact they used a much slower implementation than was possible on the hardware. It can make an enormous difference; e.g., AES-XTS on ARM can be over 10x faster with the crypto extensions than without. It can also be useful to know if an implementation using an external crypto accelerator is being used instead of a software implementation. Example message: [ 29.307629] device-mapper: crypt: xts(aes) using implementation "xts-aes-ce" We've already found the similar message in fs/crypto/keyinfo.c to be very useful. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-05 20:53:00 -08:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY set. These drivers allocate memory and thus they are unsuitable for block I/O processing. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-09 23:20:42 -07:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: move detailed message into debug level The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance. Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device). Cc: stable@vger.kernel.org Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-15 16:23:43 +02:00
dm crypt: log the encryption algorithm implementation Log the encryption algorithm's driver name when a dm-crypt target is created. This will help people determine whether the expected implementation is being used. In some cases we've seen people do benchmarks and reject using encryption for performance reasons, when in fact they used a much slower implementation than was possible on the hardware. It can make an enormous difference; e.g., AES-XTS on ARM can be over 10x faster with the crypto extensions than without. It can also be useful to know if an implementation using an external crypto accelerator is being used instead of a software implementation. Example message: [ 29.307629] device-mapper: crypt: xts(aes) using implementation "xts-aes-ce" We've already found the similar message in fs/crypto/keyinfo.c to be very useful. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-05 20:53:00 -08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: rename crypt_setkey_allcpus to crypt_setkey In the past, dm-crypt used per-cpu crypto context. This has been removed in the kernel 3.15 and the crypto context is shared between all cpus. This patch renames the function crypt_setkey_allcpus to crypt_setkey, because there is really no activity that is done for all cpus. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-25 07:12:54 -04:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: fix crash by adding missing check for auth key size If dm-crypt uses authenticated mode with separate MAC, there are two concatenated part of the key structure - key(s) for encryption and authentication key. Add a missing check for authenticated key length. If this key length is smaller than actually provided key, dm-crypt now properly fails instead of crashing. Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # 4.12+ Reported-by: Salah Coronya <salahx@yahoo.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-03 22:48:59 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix crash by adding missing check for auth key size If dm-crypt uses authenticated mode with separate MAC, there are two concatenated part of the key structure - key(s) for encryption and authentication key. Add a missing check for authenticated key length. If this key length is smaller than actually provided key, dm-crypt now properly fails instead of crashing. Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # 4.12+ Reported-by: Salah Coronya <salahx@yahoo.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-03 22:48:59 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: reject key strings containing whitespace chars Unfortunately key_string may theoretically contain whitespace even after it's processed by dm_split_args(). The reason for this is DM core supports escaping of almost all chars including any whitespace. If userspace passes a key to the kernel in format ":32:logon:my_prefix:my\ key" dm-crypt will look up key "my_prefix:my key" in kernel keyring service. So far everything's fine. Unfortunately if userspace later calls DM_TABLE_STATUS ioctl, it will not receive back expected ":32:logon:my_prefix:my\ key" but the unescaped version instead. Also userpace (most notably cryptsetup) is not ready to parse single target argument containing (even escaped) whitespace chars and any whitespace is simply taken as delimiter of another argument. This effect is mitigated by the fact libdevmapper curently performs double escaping of '\' char. Any user input in format "x\ x" is transformed into "x\\ x" before being passed to the kernel. Nonetheless dm-crypt may be used without libdevmapper. Therefore the near-term solution to this is to reject any key string containing whitespace. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-01 18:20:52 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: support using trusted keys Commit 27f5411a718c ("dm crypt: support using encrypted keys") extended dm-crypt to allow use of "encrypted" keys along with "user" and "logon". Along the same lines, teach dm-crypt to support "trusted" keys as well. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-22 09:43:21 +01:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: reject key strings containing whitespace chars Unfortunately key_string may theoretically contain whitespace even after it's processed by dm_split_args(). The reason for this is DM core supports escaping of almost all chars including any whitespace. If userspace passes a key to the kernel in format ":32:logon:my_prefix:my\ key" dm-crypt will look up key "my_prefix:my key" in kernel keyring service. So far everything's fine. Unfortunately if userspace later calls DM_TABLE_STATUS ioctl, it will not receive back expected ":32:logon:my_prefix:my\ key" but the unescaped version instead. Also userpace (most notably cryptsetup) is not ready to parse single target argument containing (even escaped) whitespace chars and any whitespace is simply taken as delimiter of another argument. This effect is mitigated by the fact libdevmapper curently performs double escaping of '\' char. Any user input in format "x\ x" is transformed into "x\\ x" before being passed to the kernel. Nonetheless dm-crypt may be used without libdevmapper. Therefore the near-term solution to this is to reject any key string containing whitespace. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-01 18:20:52 +01:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: Slightly simplify crypt_set_keyring_key() Use strchr() instead of strpbrk() when there is only 1 element in the set of characters to look for. This potentially saves a few cycles, but gcc does already account for optimizing this pattern thanks to it's fold_builtin_strpbrk(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-28 16:43:00 +01:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: replaced #if defined with IS_ENABLED IS_ENABLED(CONFIG_ENCRYPTED_KEYS) is true whether the option is built-in or a module, so use it instead of #if defined checking for each separately. The other #if was to avoid a static function defined, but unused warning. As we now always build the callsite when the function is defined, we can remove that first #if guard. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-22 09:43:20 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: support using trusted keys Commit 27f5411a718c ("dm crypt: support using encrypted keys") extended dm-crypt to allow use of "encrypted" keys along with "user" and "logon". Along the same lines, teach dm-crypt to support "trusted" keys as well. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-22 09:43:21 +01:00
dm: address indent/space issues Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 23:31:55 +01:00
dm crypt: support using trusted keys Commit 27f5411a718c ("dm crypt: support using encrypted keys") extended dm-crypt to allow use of "encrypted" keys along with "user" and "logon". Along the same lines, teach dm-crypt to support "trusted" keys as well. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-22 09:43:21 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm-crypt: Use common error handling code in crypt_set_keyring_key() Add a jump target so that a bit of exception handling can be better reused at the end of this function implementation. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-09-18 15:34:45 +02:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: replace RCU read-side section with rwsem The lockdep splat below hints at a bug in RCU usage in dm-crypt that was introduced with commit c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service"). The kernel keyring function user_key_payload() is in fact a wrapper for rcu_dereference_protected() which must not be called with only rcu_read_lock() section mark. Unfortunately the kernel keyring subsystem doesn't currently provide an interface that allows the use of an RCU read-side section. So for now we must drop RCU in favour of rwsem until a proper function is made available in the kernel keyring subsystem. =============================== [ INFO: suspicious RCU usage. ] 4.10.0-rc5 #2 Not tainted ------------------------------- ./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by cryptsetup/6464: #0: (&md->type_lock){+.+.+.}, at: [<ffffffffa02472a2>] dm_lock_md_type+0x12/0x20 [dm_mod] #1: (rcu_read_lock){......}, at: [<ffffffffa02822f8>] crypt_set_key+0x1d8/0x4b0 [dm_crypt] stack backtrace: CPU: 1 PID: 6464 Comm: cryptsetup Not tainted 4.10.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Call Trace: dump_stack+0x67/0x92 lockdep_rcu_suspicious+0xc5/0x100 crypt_set_key+0x351/0x4b0 [dm_crypt] ? crypt_set_key+0x1d8/0x4b0 [dm_crypt] crypt_ctr+0x341/0xa53 [dm_crypt] dm_table_add_target+0x147/0x330 [dm_mod] table_load+0x111/0x350 [dm_mod] ? retrieve_status+0x1c0/0x1c0 [dm_mod] ctl_ioctl+0x1f5/0x510 [dm_mod] dm_ctl_ioctl+0xe/0x20 [dm_mod] do_vfs_ioctl+0x8e/0x690 ? ____fput+0x9/0x10 ? task_work_run+0x7e/0xa0 ? trace_hardirqs_on_caller+0x122/0x1b0 SyS_ioctl+0x3c/0x70 entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7f392c9a4ec7 RSP: 002b:00007ffef6383378 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffef63830a0 RCX: 00007f392c9a4ec7 RDX: 000000000124fcc0 RSI: 00000000c138fd09 RDI: 0000000000000005 RBP: 00007ffef6383090 R08: 00000000ffffffff R09: 00000000012482b0 R10: 2a28205d34383336 R11: 0000000000000246 R12: 00007f392d803a08 R13: 00007ffef63831e0 R14: 0000000000000000 R15: 00007f392d803a0b Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service") Reported-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-31 15:47:11 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm-crypt: Use up_read() together with key_put() only once in crypt_set_keyring_key() The combination of the calls “up_read(&key->sem)” and “key_put(key)” was immediately used after a return code check for a set_key() call in this function implementation. Thus use such a function call pair only once instead directly before the check. This issue was transformed by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-09-18 15:05:29 +02:00
dm-crypt: Use common error handling code in crypt_set_keyring_key() Add a jump target so that a bit of exception handling can be better reused at the end of this function implementation. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-09-18 15:34:45 +02:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm-crypt: Use common error handling code in crypt_set_keyring_key() Add a jump target so that a bit of exception handling can be better reused at the end of this function implementation. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-09-18 15:34:45 +02:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm-crypt: Use common error handling code in crypt_set_keyring_key() Add a jump target so that a bit of exception handling can be better reused at the end of this function implementation. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-09-18 15:34:45 +02:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm-crypt: Use common error handling code in crypt_set_keyring_key() Add a jump target so that a bit of exception handling can be better reused at the end of this function implementation. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-09-18 15:34:45 +02:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS Explicitly convert unsigned int in the right of the conditional expression to int to match the left side operand and the return type, fixing the following compiler warning: drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned type in conditional expression [-Wsign-compare] Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service") Signed-off-by: Aashish Sharma <shraash@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-02-11 12:15:38 +00:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: support using encrypted keys Allow one to use "encrypted" in addition to "user" and "logon" key types for device encryption. Signed-off-by: Dmitry Baryshkov <dmitry_baryshkov@mentor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-04-20 16:46:59 +03:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
dm crypt: set key size early Simplify key size verification (hexadecimal string) and set key size early in constructor. (Patch required by later changes.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:49 +00:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: mark key as invalid until properly loaded In crypt_set_key(), if a failure occurs while replacing the old key (e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag set. Otherwise, the crypto layer would have an invalid key that still has DM_CRYPT_KEY_VALID flag set. Cc: stable@vger.kernel.org Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-02 15:02:08 +01:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06 23:18:13 -07:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: replace custom implementation of hex2bin() There is no need to have a duplication of the generic library, i.e. hex2bin(). Replace the open coded variant. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27 16:52:04 +03:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: rename crypt_setkey_allcpus to crypt_setkey In the past, dm-crypt used per-cpu crypto context. This has been removed in the kernel 3.15 and the crypto context is shared between all cpus. This patch renames the function crypt_setkey_allcpus to crypt_setkey, because there is really no activity that is done for all cpus. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-25 07:12:54 -04:00
dm crypt: mark key as invalid until properly loaded In crypt_set_key(), if a failure occurs while replacing the old key (e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag set. Otherwise, the crypto layer would have an invalid key that still has DM_CRYPT_KEY_VALID flag set. Cc: stable@vger.kernel.org Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-02 15:02:08 +01:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: rewrite (wipe) key in crypto layer using random data The message "key wipe" used to wipe real key stored in crypto layer by rewriting it with zeroes. Since commit 28856a9 ("crypto: xts - consolidate sanity check for keys") this no longer works in FIPS mode for XTS. While running in FIPS mode the crypto key part has to differ from the tweak key. Fixes: 28856a9 ("crypto: xts - consolidate sanity check for keys") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24 14:21:53 +02:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: rewrite (wipe) key in crypto layer using random data The message "key wipe" used to wipe real key stored in crypto layer by rewriting it with zeroes. Since commit 28856a9 ("crypto: xts - consolidate sanity check for keys") this no longer works in FIPS mode for XTS. While running in FIPS mode the crypto key part has to differ from the tweak key. Fixes: 28856a9 ("crypto: xts - consolidate sanity check for keys") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24 14:21:53 +02:00
dm crypt: wipe private IV struct after key invalid flag is set If a private IV wipe function fails, the code does not set the key invalid flag. To fix this, move code to after the flag is set to prevent the device from resuming in an inconsistent state. Also, this allows using of a randomized key in private wipe function (to be used in a following commit). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:12 +02:00
dm-crypt: Make crypt_iv_operations::wipe return void Since all implementations of crypt_iv_operations::wipe now return 0, change the return type to void. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-21 16:06:51 -07:00
dm crypt: wipe private IV struct after key invalid flag is set If a private IV wipe function fails, the code does not set the key invalid flag. To fix this, move code to after the flag is set to prevent the device from resuming in an inconsistent state. Also, this allows using of a randomized key in private wipe function (to be used in a following commit). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:12 +02:00
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06 23:18:13 -07:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: rewrite (wipe) key in crypto layer using random data The message "key wipe" used to wipe real key stored in crypto layer by rewriting it with zeroes. Since commit 28856a9 ("crypto: xts - consolidate sanity check for keys") this no longer works in FIPS mode for XTS. While running in FIPS mode the crypto key part has to differ from the tweak key. Fixes: 28856a9 ("crypto: xts - consolidate sanity check for keys") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24 14:21:53 +02:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: rewrite (wipe) key in crypto layer using random data The message "key wipe" used to wipe real key stored in crypto layer by rewriting it with zeroes. Since commit 28856a9 ("crypto: xts - consolidate sanity check for keys") this no longer works in FIPS mode for XTS. While running in FIPS mode the crypto key part has to differ from the tweak key. Fixes: 28856a9 ("crypto: xts - consolidate sanity check for keys") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24 14:21:53 +02:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
mm: convert totalram_pages and totalhigh_pages variables to atomic totalram_pages and totalhigh_pages are made static inline function. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Suggested-by: Michal Hocko <mhocko@suse.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 00:34:29 -08:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc() On systems with many cores using dm-crypt, heavy spinlock contention in percpu_counter_compare() can be observed when the page allocation limit for a given device is reached or close to be reached. This is due to percpu_counter_compare() taking a spinlock to compute an exact result on potentially many CPUs at the same time. Switch to non-exact comparison of allocated and allowed pages by using the value returned by percpu_counter_read_positive() to avoid taking the percpu_counter spinlock. This may over/under estimate the actual number of allocated pages by at most (batch-1) * num_online_cpus(). Currently, batch is bounded by 32. The system on which this issue was first observed has 256 CPUs and 512GB of RAM. With a 4k page size, this change may over/under estimate by 31MB. With ~10G (2%) allowed dm-crypt allocations, this seems an acceptable error. Certainly preferred over running into the spinlock contention. This behavior was reproduced on an EC2 c5.24xlarge instance with 96 CPUs and 192GB RAM as follows, but can be provoked on systems with less CPUs as well. * Disable swap * Tune vm settings to promote regular writeback $ echo 50 > /proc/sys/vm/dirty_expire_centisecs $ echo 25 > /proc/sys/vm/dirty_writeback_centisecs $ echo $((128 * 1024 * 1024)) > /proc/sys/vm/dirty_background_bytes * Create 8 dmcrypt devices based on files on a tmpfs * Create and mount an ext4 filesystem on each crypt devices * Run stress-ng --hdd 8 within one of above filesystems Total %system usage collected from sysstat goes to ~35%. Write throughput on the underlying loop device is ~2GB/s. perf profiling an individual kworker kcryptd thread shows the following profile, indicating spinlock contention in percpu_counter_compare(): 99.98% 0.00% kworker/u193:46 [kernel.kallsyms] [k] ret_from_fork | --ret_from_fork kthread worker_thread | --99.92%--process_one_work | |--80.52%--kcryptd_crypt | | | |--62.58%--mempool_alloc | | | | | --62.24%--crypt_page_alloc | | | | | --61.51%--__percpu_counter_compare | | | | | --61.34%--__percpu_counter_sum | | | | | |--58.68%--_raw_spin_lock_irqsave | | | | | | | --58.30%--native_queued_spin_lock_slowpath | | | | | --0.69%--cpumask_next | | | | | --0.51%--_find_next_bit | | | |--10.61%--crypt_convert | | | | | |--6.05%--xts_crypt ... After applying this patch and running the same test, %system usage is lowered to ~7% and write throughput on the loop device increases to ~2.7GB/s. perf report shows mempool_alloc() as ~8% rather than ~62% in the profile and not hitting the percpu_counter() spinlock anymore. |--8.15%--mempool_alloc | | | |--3.93%--crypt_page_alloc | | | | | --3.75%--__alloc_pages | | | | | --3.62%--get_page_from_freelist | | | | | --3.22%--rmqueue_bulk | | | | | --2.59%--_raw_spin_lock | | | | | --2.57%--native_queued_spin_lock_slowpath | | | --3.05%--_raw_spin_lock_irqsave | | | --2.49%--native_queued_spin_lock_slowpath Suggested-by: DJ Gregor <dj@corelight.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Arne Welzel <arne.welzel@corelight.com> Fixes: 5059353df86e ("dm crypt: limit the number of allocated pages") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-08-14 00:40:38 +02:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: fix crash on exit As the documentation for kthread_stop() says, "if threadfn() may call do_exit() itself, the caller must ensure task_struct can't go away". dm-crypt does not ensure this and therefore crashes when crypt_dtr() calls kthread_stop(). The crash is trivially reproducible by adding a delay before the call to kthread_stop() and just opening and closing a dm-crypt device. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 533 Comm: cryptsetup Not tainted 4.8.0-rc7+ #7 task: ffff88003bd0df40 task.stack: ffff8800375b4000 RIP: 0010: kthread_stop+0x52/0x300 Call Trace: crypt_dtr+0x77/0x120 dm_table_destroy+0x6f/0x120 __dm_destroy+0x130/0x250 dm_destroy+0x13/0x20 dev_remove+0xe6/0x120 ? dev_suspend+0x250/0x250 ctl_ioctl+0x1fc/0x530 ? __lock_acquire+0x24f/0x1b10 dm_ctl_ioctl+0x13/0x20 do_vfs_ioctl+0x91/0x6a0 ? ____fput+0xe/0x10 ? entry_SYSCALL_64_fastpath+0x5/0xbd ? trace_hardirqs_on_caller+0x151/0x1e0 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1f/0xbd This problem was introduced by bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit"). Looking at the description of that patch (excerpted below), it seems like the problem it addresses can be solved by just using set_current_state instead of __set_current_state, since we obviously need the memory barrier. | dm crypt: fix a possible hang due to race condition on exit | | A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE), | __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop(). | It is possible that the processor reorders memory accesses so that | kthread_should_stop() is executed before __set_current_state(). If | such reordering happens, there is a possible race on thread | termination: [...] So this patch just reverts the aforementioned patch and changes the __set_current_state(TASK_INTERRUPTIBLE) to set_current_state(...). This fixes the crash and should also fix the potential hang. Fixes: bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit") Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-09-21 16:22:29 +02:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm-crypt: fix warning in shutdown path The counter for the number of allocated pages includes pages in the mempool's reserve, so checking that the number of allocated pages is 0 needs to happen after we exit the mempool. Fixes: 6f1c819c219f ("dm: convert to bioset_init()/mempool_init()") Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mike Snitzer <snitzer@redhat.com> Fixed to always just use percpu_counter_sum() Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-02 13:45:04 -04:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06 23:18:13 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm: backfill missing calls to mutex_destroy() Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-05 21:17:20 -05:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06 23:18:13 -07:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
dm crypt: log aead integrity violations to audit subsystem Since dm-crypt target can be stacked on dm-integrity targets to provide authenticated encryption, integrity violations are recognized here during aead computation. We use the dm-audit submodule to signal those events to user space, too. The construction and destruction of crypt device mappings are also logged as audit events. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-09-04 11:59:30 +02:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: factor IV constructor out to separate function No functional change. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:39 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: factor IV constructor out to separate function No functional change. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:39 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm crypt: add big-endian variant of plain64 IV The big-endian IV (plain64be) is needed to map images from extracted disks that are used in some external (on-chip FDE) disk encryption drives, e.g.: data recovery from external USB/SATA drives that support "internal" encryption. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-06 09:07:01 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: add null iv Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:55 -07:00
dm crypt: implement eboiv - encrypted byte-offset initialization vector This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:14 +02:00
dm crypt: Implement Elephant diffuser for Bitlocker compatibility Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-03 09:20:22 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: factor IV constructor out to separate function No functional change. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:39 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: factor IV constructor out to separate function No functional change. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:39 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: factor IV constructor out to separate function No functional change. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:39 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: replace open-coded kmemdup_nul kzalloc() followed by strncpy() on an expected NUL-terminated string is just kmemdup_nul(). Let's simplify this code (while also dropping a deprecated strncpy() call [1]). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-09-25 06:35:54 +00:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY set. These drivers allocate memory and thus they are unsuitable for block I/O processing. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-09 23:20:42 -07:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm-crypt: Allow to specify the integrity key size as option For the MAC based integrity operation, the integrity key size (i.e. key_mac_size) is currently set to the digest size of the used digest. For wrapped key HMAC algorithms, the key size is independent of the cryptographic key size. So there is no known size of the mac key in such cases. The desired key size can optionally be specified as argument when the dm-crypt device is configured via 'integrity_key_size:%u'. If no integrity_key_size argument is specified, the mac key size is still set to the digest size, as before. Increase version number to 1.28.0 so that support for the new argument can be detected by user space (i.e. cryptsetup). Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-08-16 13:21:33 +02:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: switch to ESSIV crypto API template Replace the explicit ESSIV handling in the dm-crypt driver with calls into the crypto API, which now possesses the capability to perform this processing within the crypto subsystem. Note that we reorder the AEAD cipher_api string parsing with the TFM instantiation: this is needed because cipher_api is mangled by the ESSIV handling, and throws off the parsing of "authenc(" otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-19 17:17:37 +03:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: fix parsing of extended IV arguments The dm-crypt cipher specification in a mapping table is defined as: cipher[:keycount]-chainmode-ivmode[:ivopts] or (new crypt API format): capi:cipher_api_spec-ivmode[:ivopts] For ESSIV, the parameter includes hash specification, for example: aes-cbc-essiv:sha256 The implementation expected that additional IV option to never include another dash '-' character. But, with SHA3, there are names like sha3-256; so the mapping table parser fails: dmsetup create test --table "0 8 crypt aes-cbc-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" or (new crypt API format) dmsetup create test --table "0 8 crypt capi:cbc(aes)-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" device-mapper: crypt: Ignoring unexpected additional cipher options device-mapper: table: 253:0: crypt: Error creating IV device-mapper: ioctl: error adding target to table Fix the dm-crypt constructor to ignore additional dash in IV options and also remove a bogus warning (that is ignored anyway). Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-09 11:57:14 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: switch to ESSIV crypto API template Replace the explicit ESSIV handling in the dm-crypt driver with calls into the crypto API, which now possesses the capability to perform this processing within the crypto subsystem. Note that we reorder the AEAD cipher_api string parsing with the TFM instantiation: this is needed because cipher_api is mangled by the ESSIV handling, and throws off the parsing of "authenc(" otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-19 17:17:37 +03:00
dm crypt: fix crypt_ctr_cipher_new return value on invalid AEAD cipher If the user specifies invalid AEAD cipher, dm-crypt should return the error returned from crypt_ctr_auth_spec, not -ENOMEM. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-05-24 05:35:29 -04:00
dm crypt: switch to ESSIV crypto API template Replace the explicit ESSIV handling in the dm-crypt driver with calls into the crypto API, which now possesses the capability to perform this processing within the crypto subsystem. Note that we reorder the AEAD cipher_api string parsing with the TFM instantiation: this is needed because cipher_api is mangled by the ESSIV handling, and throws off the parsing of "authenc(" otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-19 17:17:37 +03:00
dm-crypt: reject the lmk IV mode with AEAD ciphers A "capi:" table line that pairs an AEAD cipher with the lmk IV mode, for example "capi:gcm(aes)-lmk" with the integrity:28:aead option, causes an oops when it is loaded. lmk sets tfms_count to 64, but crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey reads past the end of the tfms_aead array and calls crypto_aead_setkey on the values it finds there. lmk exists for compatibility with Loop-AES, which uses CBC, so refuse it with an AEAD cipher rather than allocate 64 AEAD transforms. The check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because the IV constructor runs after crypt_set_key. Note that this is not a security bug because the memory corruption can only be triggered by root. Fixes: 33d2f09fcb35 ("dm crypt: introduce new format of cipher with "capi:" prefix") Cc: stable@vger.kernel.org Signed-off-by: Ben Cressey <ben@cressey.dev> Assisted-by: LLM Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-09-15 00:39:10 +00:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm-crypt: reject the lmk IV mode with AEAD ciphers A "capi:" table line that pairs an AEAD cipher with the lmk IV mode, for example "capi:gcm(aes)-lmk" with the integrity:28:aead option, causes an oops when it is loaded. lmk sets tfms_count to 64, but crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey reads past the end of the tfms_aead array and calls crypto_aead_setkey on the values it finds there. lmk exists for compatibility with Loop-AES, which uses CBC, so refuse it with an AEAD cipher rather than allocate 64 AEAD transforms. The check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because the IV constructor runs after crypt_set_key. Note that this is not a security bug because the memory corruption can only be triggered by root. Fixes: 33d2f09fcb35 ("dm crypt: introduce new format of cipher with "capi:" prefix") Cc: stable@vger.kernel.org Signed-off-by: Ben Cressey <ben@cressey.dev> Assisted-by: LLM Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-09-15 00:39:10 +00:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: switch to ESSIV crypto API template Replace the explicit ESSIV handling in the dm-crypt driver with calls into the crypto API, which now possesses the capability to perform this processing within the crypto subsystem. Note that we reorder the AEAD cipher_api string parsing with the TFM instantiation: this is needed because cipher_api is mangled by the ESSIV handling, and throws off the parsing of "authenc(" otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-19 17:17:37 +03:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: switch to ESSIV crypto API template Replace the explicit ESSIV handling in the dm-crypt driver with calls into the crypto API, which now possesses the capability to perform this processing within the crypto subsystem. Note that we reorder the AEAD cipher_api string parsing with the TFM instantiation: this is needed because cipher_api is mangled by the ESSIV handling, and throws off the parsing of "authenc(" otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-19 17:17:37 +03:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: switch to ESSIV crypto API template Replace the explicit ESSIV handling in the dm-crypt driver with calls into the crypto API, which now possesses the capability to perform this processing within the crypto subsystem. Note that we reorder the AEAD cipher_api string parsing with the TFM instantiation: this is needed because cipher_api is mangled by the ESSIV handling, and throws off the parsing of "authenc(" otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-19 17:17:37 +03:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm: reject trailing characters in sccanf input Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm: reject trailing characters in sccanf input Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix parsing of extended IV arguments The dm-crypt cipher specification in a mapping table is defined as: cipher[:keycount]-chainmode-ivmode[:ivopts] or (new crypt API format): capi:cipher_api_spec-ivmode[:ivopts] For ESSIV, the parameter includes hash specification, for example: aes-cbc-essiv:sha256 The implementation expected that additional IV option to never include another dash '-' character. But, with SHA3, there are names like sha3-256; so the mapping table parser fails: dmsetup create test --table "0 8 crypt aes-cbc-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" or (new crypt API format) dmsetup create test --table "0 8 crypt capi:cbc(aes)-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" device-mapper: crypt: Ignoring unexpected additional cipher options device-mapper: table: 253:0: crypt: Error creating IV device-mapper: ioctl: error adding target to table Fix the dm-crypt constructor to ignore additional dash in IV options and also remove a bogus warning (that is ignored anyway). Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-09 11:57:14 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:52 +00:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: switch to ESSIV crypto API template Replace the explicit ESSIV handling in the dm-crypt driver with calls into the crypto API, which now possesses the capability to perform this processing within the crypto subsystem. Note that we reorder the AEAD cipher_api string parsing with the TFM instantiation: this is needed because cipher_api is mangled by the ESSIV handling, and throws off the parsing of "authenc(" otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-19 17:17:37 +03:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
[BLOCK] dm-crypt: Use block ciphers where applicable This patch converts dm-crypt to use the new block cipher type where applicable. It also changes simple cipher operations to use the new encrypt_one/decrypt_one interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 20:29:17 +10:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix memory leak in crypt_ctr_cipher_old() Fix memory leak of cipher_api. Fixes: 33d2f09fcb35 (dm crypt: introduce new format of cipher with "capi:" prefix) Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-27 20:28:57 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: factor IV constructor out to separate function No functional change. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:39 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: wipe kernel key copy after IV initialization Loading key via kernel keyring service erases the internal key copy immediately after we pass it in crypto layer. This is wrong because IV is initialized later and we use wrong key for the initialization (instead of real key there's just zeroed block). The bug may cause data corruption if key is loaded via kernel keyring service first and later same crypt device is reactivated using exactly same key in hexbyte representation, or vice versa. The bug (and fix) affects only ciphers using following IVs: essiv, lmk and tcw. Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service") Cc: stable@vger.kernel.org # 4.10+ Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-12 16:30:32 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: constify argument arrays The arrays of 'struct dm_arg' are never modified by the device-mapper core, so constify them so that they are placed in .rodata. (Exception: the args array in dm-raid cannot be constified because it is allocated on the stack and modified.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-22 11:32:45 -07:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add flags to optionally bypass kcryptd workqueues This is a follow up to [1] that detailed latency problems associated with dm-crypt's use of workqueues when processing IO. Current dm-crypt implementation creates a significant IO performance overhead (at least on small IO block sizes) for both latency and throughput. We suspect offloading IO request processing into workqueues and async threads is more harmful these days with the modern fast storage. I also did some digging into the dm-crypt git history and much of this async processing is not needed anymore, because the reasons it was added are mostly gone from the kernel. More details can be found in [2] (see "Git archeology" section). This change adds DM_CRYPT_NO_READ_WORKQUEUE and DM_CRYPT_NO_WRITE_WORKQUEUE flags for read and write BIOs, which direct dm-crypt to not offload crypto operations into kcryptd workqueues. In addition, writes are not buffered to be sorted in the dm-crypt red-black tree, but dispatched immediately. For cases, where crypto operations cannot happen (hard interrupt context, for example the read path of some NVME drivers), we offload the work to a tasklet rather than a workqueue. These flags only ensure no async BIO processing in the dm-crypt module. It is worth noting that some Crypto API implementations may offload encryption into their own workqueues, which are independent of the dm-crypt and its configuration. However upon enabling these new flags dm-crypt will instruct Crypto API not to backlog crypto requests. To give an idea of the performance gains for certain workloads, consider the script, and results when tested against various devices, detailed here: https://www.redhat.com/archives/dm-devel/2020-July/msg00138.html [1]: https://www.spinics.net/lists/dm-crypt/msg07516.html [2]: https://blog.cloudflare.com/speeding-up-linux-disk-encryption/ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-06 18:37:31 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: recheck the integrity tag after a failure If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array. This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported. [1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-02-19 21:31:11 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: Allow to specify the integrity key size as option For the MAC based integrity operation, the integrity key size (i.e. key_mac_size) is currently set to the digest size of the used digest. For wrapped key HMAC algorithms, the key size is independent of the cryptographic key size. So there is no known size of the mac key in such cases. The desired key size can optionally be specified as argument when the dm-crypt device is configured via 'integrity_key_size:%u'. If no integrity_key_size argument is specified, the mac key size is still set to the digest size, as before. Increase version number to 1.28.0 so that support for the new argument can be detected by user space (i.e. cryptsetup). Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-08-16 13:21:33 +02:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: reject sector_size feature if device length is not aligned to it If a crypt mapping uses optional sector_size feature, additional restrictions to mapped device segment size must be applied in constructor, otherwise the device activation will fail later. Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-13 15:45:56 +02:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm: Introduce dm_report_zones() To simplify the implementation of the report_zones operation of a zoned target, introduce the function dm_report_zones() to set a target mapping start sector in struct dm_report_zones_args and call blkdev_report_zones(). This new function is exported and the report zones callback function dm_report_zones_cb() is not. dm-linear, dm-flakey and dm-crypt are modified to use dm_report_zones(). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 06:24:57 +09:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type definition of various targets. Suggested-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-02-10 17:38:30 -05:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: make workqueue names device-specific Make cpu-usage debugging easier by naming workqueues per device. Example ps output: root 413 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd_io/253:0] root 414 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd/253:0] root 415 0.0 0.0 0 0 ? S paź02 1:10 [dmcrypt_write/253:0] root 465 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd_io/253:2] root 466 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd/253:2] root 467 0.0 0.0 0 0 ? S paź02 2:06 [dmcrypt_write/253:2] root 15359 0.2 0.0 0 0 ? I< 19:43 0:25 [kworker/u17:8-kcryptd/253:0] root 16563 0.2 0.0 0 0 ? I< 20:10 0:18 [kworker/u17:0-kcryptd/253:2] root 23205 0.1 0.0 0 0 ? I< 21:21 0:04 [kworker/u17:4-kcryptd/253:0] root 13383 0.1 0.0 0 0 ? I< 21:32 0:02 [kworker/u17:2-kcryptd/253:2] root 2610 0.1 0.0 0 0 ? I< 21:42 0:01 [kworker/u17:12-kcryptd/253:2] root 20124 0.1 0.0 0 0 ? I< 21:56 0:01 [kworker/u17:1-kcryptd/253:2] Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-09 22:13:43 +02:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: reject trailing characters in sccanf input Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Convert 'alloc_flex' family to use the new default GFP_KERNEL argument This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 17:06:51 -08:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: set key size early Simplify key size verification (hexadecimal string) and set key size early in constructor. (Patch required by later changes.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:49 +00:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: limit the number of allocated pages dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-13 22:45:08 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix access beyond the end of allocated space The DM crypt target accesses memory beyond allocated space resulting in a crash on 32 bit x86 systems. This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm crypt: use async crypto"). However, this bug was masked by the fact that kmalloc rounds the size up to the next power of two. This bug wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio data"). By switching to using per-bio data there was no longer any padding beyond the end of a dm-crypt allocated memory block. To minimize allocation overhead dm-crypt puts several structures into one block allocated with kmalloc. The block holds struct ablkcipher_request, cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))), struct dm_crypt_request and an initialization vector. The variable dmreq_start is set to offset of struct dm_crypt_request within this memory block. dm-crypt allocates the block with this size: cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size. When accessing the initialization vector, dm-crypt uses the function iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq + 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1). dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request structure. However, when dm-crypt accesses the initialization vector, it takes a pointer to the end of dm_crypt_request, aligns it, and then uses it as the initialization vector. If the end of dm_crypt_request is not aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the alignment causes the initialization vector to point beyond the allocated space. Fix this bug by calculating the variable iv_size_padding and adding it to the allocated size. Also correct the alignment of dm_crypt_request. struct dm_crypt_request is specific to dm-crypt (it isn't used by the crypto subsystem at all), so it is aligned on __alignof__(struct dm_crypt_request). Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is aligned as if the block was allocated with kmalloc. Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-28 11:09:31 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix access beyond the end of allocated space The DM crypt target accesses memory beyond allocated space resulting in a crash on 32 bit x86 systems. This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm crypt: use async crypto"). However, this bug was masked by the fact that kmalloc rounds the size up to the next power of two. This bug wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio data"). By switching to using per-bio data there was no longer any padding beyond the end of a dm-crypt allocated memory block. To minimize allocation overhead dm-crypt puts several structures into one block allocated with kmalloc. The block holds struct ablkcipher_request, cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))), struct dm_crypt_request and an initialization vector. The variable dmreq_start is set to offset of struct dm_crypt_request within this memory block. dm-crypt allocates the block with this size: cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size. When accessing the initialization vector, dm-crypt uses the function iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq + 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1). dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request structure. However, when dm-crypt accesses the initialization vector, it takes a pointer to the end of dm_crypt_request, aligns it, and then uses it as the initialization vector. If the end of dm_crypt_request is not aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the alignment causes the initialization vector to point beyond the allocated space. Fix this bug by calculating the variable iv_size_padding and adding it to the allocated size. Also correct the alignment of dm_crypt_request. struct dm_crypt_request is specific to dm-crypt (it isn't used by the crypto subsystem at all), so it is aligned on __alignof__(struct dm_crypt_request). Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is aligned as if the block was allocated with kmalloc. Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-28 11:09:31 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix access beyond the end of allocated space The DM crypt target accesses memory beyond allocated space resulting in a crash on 32 bit x86 systems. This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm crypt: use async crypto"). However, this bug was masked by the fact that kmalloc rounds the size up to the next power of two. This bug wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio data"). By switching to using per-bio data there was no longer any padding beyond the end of a dm-crypt allocated memory block. To minimize allocation overhead dm-crypt puts several structures into one block allocated with kmalloc. The block holds struct ablkcipher_request, cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))), struct dm_crypt_request and an initialization vector. The variable dmreq_start is set to offset of struct dm_crypt_request within this memory block. dm-crypt allocates the block with this size: cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size. When accessing the initialization vector, dm-crypt uses the function iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq + 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1). dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request structure. However, when dm-crypt accesses the initialization vector, it takes a pointer to the end of dm_crypt_request, aligns it, and then uses it as the initialization vector. If the end of dm_crypt_request is not aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the alignment causes the initialization vector to point beyond the allocated space. Fix this bug by calculating the variable iv_size_padding and adding it to the allocated size. Also correct the alignment of dm_crypt_request. struct dm_crypt_request is specific to dm-crypt (it isn't used by the crypto subsystem at all), so it is aligned on __alignof__(struct dm_crypt_request). Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is aligned as if the block was allocated with kmalloc. Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-28 11:09:31 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: fix access beyond the end of allocated space The DM crypt target accesses memory beyond allocated space resulting in a crash on 32 bit x86 systems. This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm crypt: use async crypto"). However, this bug was masked by the fact that kmalloc rounds the size up to the next power of two. This bug wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio data"). By switching to using per-bio data there was no longer any padding beyond the end of a dm-crypt allocated memory block. To minimize allocation overhead dm-crypt puts several structures into one block allocated with kmalloc. The block holds struct ablkcipher_request, cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))), struct dm_crypt_request and an initialization vector. The variable dmreq_start is set to offset of struct dm_crypt_request within this memory block. dm-crypt allocates the block with this size: cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size. When accessing the initialization vector, dm-crypt uses the function iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq + 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1). dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request structure. However, when dm-crypt accesses the initialization vector, it takes a pointer to the end of dm_crypt_request, aligns it, and then uses it as the initialization vector. If the end of dm_crypt_request is not aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the alignment causes the initialization vector to point beyond the allocated space. Fix this bug by calculating the variable iv_size_padding and adding it to the allocated size. Also correct the alignment of dm_crypt_request. struct dm_crypt_request is specific to dm-crypt (it isn't used by the crypto subsystem at all), so it is aligned on __alignof__(struct dm_crypt_request). Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is aligned as if the block was allocated with kmalloc. Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-28 11:09:31 -04:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm: rename target's per_bio_data_size to per_io_data_size Request-based DM will also make use of per_bio_data_size. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-01-31 13:28:26 -05:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-10-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:31:53 +01:00
dm crypt: use per-bio data Change dm-crypt so that it uses auxiliary data allocated with the bio. Dm-crypt requires two allocations per request - struct dm_crypt_io and struct ablkcipher_request (with other data appended to it). It previously only used mempool allocations. Some requests may require more dm_crypt_ios and ablkcipher_requests, however most requests need just one of each of these two structures to complete. This patch changes it so that the first dm_crypt_io and ablkcipher_request are allocated with the bio (using target per_bio_data_size option). If the request needs additional values, they are allocated from the mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-28 15:51:55 -04:00
block: rename BIO_MAX_PAGES to BIO_MAX_VECS Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop confusing users of the bio API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-11 12:01:37 +01:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
[PATCH] dm crypt: use private biosets In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:40 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
[PATCH] dm crypt: use private biosets In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:40 -07:00
dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. To avoid such a scenario we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if that fails, we fallback to a blocking allocations with a mutex. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:24:41 -05:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: remove SECTOR_FORMAT We don't know what type sector_t has. Sometimes it's unsigned long, sometimes it's unsigned long long. For example on ppc64 it's unsigned long with CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n. The way to handle all of this is to always use unsigned long long and to always typecast the sector_t when printing it. Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:17:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: do not override error code returned from dm_get_device() Some of the device mapper targets override the error code returned by dm_get_device() and return either -EINVAL or -ENXIO. There is nothing gained by this override. It is better to propagate the returned error code unchanged to caller. This work was motivated by hitting an issue where the underlying device was busy but -EINVAL was being returned. After this change we get -EBUSY instead and it is easier to figure out the problem. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-07-31 09:20:36 -04:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm: do not override error code returned from dm_get_device() Some of the device mapper targets override the error code returned by dm_get_device() and return either -EINVAL or -ENXIO. There is nothing gained by this override. It is better to propagate the returned error code unchanged to caller. This work was motivated by hitting an issue where the underlying device was busy but -EINVAL was being returned. After this change we get -EBUSY instead and it is easier to figure out the problem. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-07-31 09:20:36 -04:00
dm: Check for device sector overflow if CONFIG_LBDAF is not set Reference to a device in device-mapper table contains offset in sectors. If the sector_t is 32bit integer (CONFIG_LBDAF is not set), then several device-mapper targets can overflow this offset and validity check is then performed on a wrong offset and a wrong table is activated. See for example (on 32bit without CONFIG_LBDAF) this overflow: # dmsetup create test --table "0 2048 linear /dev/sdg 4294967297" # dmsetup table test 0 2048 linear 8:96 1 This patch adds explicit check for overflow if the offset is sector_t type. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-11-07 22:24:55 +01:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: remove SECTOR_FORMAT We don't know what type sector_t has. Sometimes it's unsigned long, sometimes it's unsigned long long. For example on ppc64 it's unsigned long with CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n. The way to handle all of this is to always use unsigned long long and to always typecast the sector_t when printing it. Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:17:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: Fix zoned block device support Zone append BIOs (REQ_OP_ZONE_APPEND) always specify the start sector of the zone to be written instead of the actual sector location to write. The write location is determined by the device and returned to the host upon completion of the operation. This interface, while simple and efficient for writing into sequential zones of a zoned block device, is incompatible with the use of sector values to calculate a cypher block IV. All data written in a zone end up using the same IV values corresponding to the first sectors of the zone, but read operation will specify any sector within the zone resulting in an IV mismatch between encryption and decryption. To solve this problem, report to DM core that zone append operations are not supported. This result in the zone append operations being emulated using regular write operations. Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 06:25:01 +09:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: Fix zoned block device support Zone append BIOs (REQ_OP_ZONE_APPEND) always specify the start sector of the zone to be written instead of the actual sector location to write. The write location is determined by the device and returned to the host upon completion of the operation. This interface, while simple and efficient for writing into sequential zones of a zoned block device, is incompatible with the use of sector values to calculate a cypher block IV. All data written in a zone end up using the same IV values corresponding to the first sectors of the zone, but read operation will specify any sector within the zone resulting in an IV mismatch between encryption and decryption. To solve this problem, report to DM core that zone append operations are not supported. This result in the zone append operations being emulated using regular write operations. Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 06:25:01 +09:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: fix large block integrity support Previously, dm-crypt could use blocks composed of multiple 512b sectors but it created integrity profile for each 512b sector (it padded it with zeroes). Fix dm-crypt so that the integrity profile is sent for each block not each sector. The user must use the same block size in the DM crypt and integrity targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-18 16:51:54 -04:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm: add WQ_PERCPU to alloc_workqueue users This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") The refactoring is going to alter the default behavior of alloc_workqueue() to be unbound by default. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. For more details see the Link tag below. In order to keep alloc_workqueue() behavior identical, explicitly request WQ_PERCPU. Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/ Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-01-13 12:03:02 +01:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm: add WQ_PERCPU to alloc_workqueue users This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") The refactoring is going to alter the default behavior of alloc_workqueue() to be unbound by default. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. For more details see the Link tag below. In order to keep alloc_workqueue() behavior identical, explicitly request WQ_PERCPU. Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/ Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-01-13 12:03:02 +01:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue Fix crypt_queue's use of WQ_UNBOUND to _not_ use WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND. Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-12 10:58:05 -04:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue Fix crypt_queue's use of WQ_UNBOUND to _not_ use WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND. Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-12 10:58:05 -04:00
dm-crypt: export sysfs of all workqueues Once there is a heavy IO load, so many encrypt/decrypt work will occupy all of the cpu, which may lead to the poor performance for other service. So the improved visibility and controls over dm-crypt workqueues, as was offered with commit a2b8b2d97567 ("dm crypt: export sysfs of kcryptd workqueue"), seems necessary. By exporting dm-crypt's workqueues in sysfs, the entry like cpumask/max_active and so on can help us to limit the CPU usage for encrypt/decrypt work. However, commit a2b8b2d97567 did not consider that DM table reload will call .ctr before .dtr, so the reload for dm-crypt failed because the same sysfs name was present. This was the original need for commit 48b0777cd93d ("Revert "dm crypt: export sysfs of kcryptd workqueue""). Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt workqueues, but make the workqueue names include a unique id (via ida) to allow both old and new sysfs entries to coexist. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-07-11 14:11:29 +08:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: use per device singlethread workqueues Use a separate single-threaded workqueue for each crypt device instead of one global workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:57 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: use per device singlethread workqueues Use a separate single-threaded workqueue for each crypt device instead of one global workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:57 +01:00
dm crypt: use wake_up_process() instead of a wait queue This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-11 12:10:51 -04:00
dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:41 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: Make use of the helper macro kthread_run() Replace kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-21 16:39:01 +08:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm: rename request variables to bios Use 'bio' in the name of variables and functions that deal with bios rather than 'request' to avoid confusion with the normal block layer use of 'request'. No functional changes. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:47 +00:00
dm: fix deadlock when swapping to encrypted device The system would deadlock when swapping to a dm-crypt device. The reason is that for each incoming write bio, dm-crypt allocates memory that holds encrypted data. These excessive allocations exhaust all the memory and the result is either deadlock or OOM trigger. This patch limits the number of in-flight swap bios, so that the memory consumed by dm-crypt is limited. The limit is enforced if the target set the "limit_swap_bios" variable and if the bio has REQ_SWAP set. Non-swap bios are not affected becuase taking the semaphore would cause performance degradation. This is similar to request-based drivers - they will also block when the number of requests is over the limit. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-02-10 15:26:23 -05:00
dm crypt: use dm_submit_bio_remap Care was taken to support kcryptd_io_read being called from crypt_map or workqueue. Use of an intermediate CRYPT_MAP_READ_GFP gfp_t (defined as GFP_NOWAIT) should protect from maintenance burden if that flag were to change for some reason. Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-02-17 23:40:35 -05:00
dm crypt: always disable discard_zeroes_data If optional discard support in dm-crypt is enabled, discards requests bypass the crypt queue and blocks of the underlying device are discarded. For the read path, discarded blocks are handled the same as normal ciphertext blocks, thus decrypted. So if the underlying device announces discarded regions return zeroes, dm-crypt must disable this flag because after decryption there is just random noise instead of zeroes. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-09-25 23:26:21 +01:00
dm crypt: log aead integrity violations to audit subsystem Since dm-crypt target can be stacked on dm-integrity targets to provide authenticated encryption, integrity violations are recognized here during aead computation. We use the dm-audit submodule to signal those events to user space, too. The construction and destruction of crypt device mappings are also logged as audit events. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-09-04 11:59:30 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: log aead integrity violations to audit subsystem Since dm-crypt target can be stacked on dm-integrity targets to provide authenticated encryption, integrity violations are recognized here during aead computation. We use the dm-audit submodule to signal those events to user space, too. The construction and destruction of crypt device mappings are also logged as audit events. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-09-04 11:59:30 +02:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: remove map_info This patch removes map_info from bio-based device mapper targets. map_info is still used for request-based targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:41 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: use kmem_cache macro Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 17:26:32 +01:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm-crypt: limit the size of encryption requests There was a performance regression reported where dm-crypt would perform worse on new kernels than on old kernels. The reason is that the old kernels split the bios to NVMe request size (that is usually 65536 or 131072 bytes) and the new kernels pass the big bios through dm-crypt and split them underneath. If a big 1MiB bio is passed to dm-crypt, dm-crypt processes it on a single core without parallelization and this is what causes the performance degradation. This commit introduces new tunable variables /sys/module/dm_crypt/parameters/max_read_size and /sys/module/dm_crypt/parameters/max_write_size that specify the maximum bio size for dm-crypt. Bios larger than this value are split, so that they can be encrypted in parallel by multiple cores. If these variables are '0', a default 131072 is used. Splitting bios may cause performance regressions in other workloads - if this happens, the user should increase the value in max_read_size and max_write_size variables. max_read_size: 128k 2399MiB/s 256k 2368MiB/s 512k 1986MiB/s 1024 1790MiB/s max_write_size: 128k 1712MiB/s 256k 1651MiB/s 512k 1537MiB/s 1024k 1332MiB/s Note that if you run dm-crypt inside a virtual machine, you may need to do "echo numa >/sys/module/workqueue/parameters/default_affinity_scope" to improve performance. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com>
2024-07-03 15:00:29 +02:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
dm crypt: support flush Flush support for dm-crypt target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:23 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:25 -05:00
dm: use bio op accessors Separate the op from the rq_flag_bits and have dm set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:04 -05:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
block: rename bio bi_rw to bi_opf Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-05 15:35:16 -06:00
block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:25 -05:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
dm crypt: support flush Flush support for dm-crypt target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix error with too large bios When dm-crypt processes writes, it allocates a new bio in crypt_alloc_buffer(). The bio is allocated from a bio set and it can have at most BIO_MAX_PAGES vector entries, however the incoming bio can be larger (e.g. if it was allocated by bcache). If the incoming bio is larger, bio_alloc_bioset() fails and an error is returned. To avoid the error, we test for a too large bio in the function crypt_map() and use dm_accept_partial_bio() to split the bio. dm_accept_partial_bio() trims the current bio to the desired size and asks DM core to send another bio with the rest of the data. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.16+
2016-08-30 16:38:42 -04:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
dm crypt: fix error with too large bios When dm-crypt processes writes, it allocates a new bio in crypt_alloc_buffer(). The bio is allocated from a bio set and it can have at most BIO_MAX_PAGES vector entries, however the incoming bio can be larger (e.g. if it was allocated by bcache). If the incoming bio is larger, bio_alloc_bioset() fails and an error is returned. To avoid the error, we test for a too large bio in the function crypt_map() and use dm_accept_partial_bio() to split the bio. dm_accept_partial_bio() trims the current bio to the desired size and asks DM core to send another bio with the rest of the data. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.16+
2016-08-30 16:38:42 -04:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
dm-crypt: limit the size of encryption requests There was a performance regression reported where dm-crypt would perform worse on new kernels than on old kernels. The reason is that the old kernels split the bios to NVMe request size (that is usually 65536 or 131072 bytes) and the new kernels pass the big bios through dm-crypt and split them underneath. If a big 1MiB bio is passed to dm-crypt, dm-crypt processes it on a single core without parallelization and this is what causes the performance degradation. This commit introduces new tunable variables /sys/module/dm_crypt/parameters/max_read_size and /sys/module/dm_crypt/parameters/max_write_size that specify the maximum bio size for dm-crypt. Bios larger than this value are split, so that they can be encrypted in parallel by multiple cores. If these variables are '0', a default 131072 is used. Splitting bios may cause performance regressions in other workloads - if this happens, the user should increase the value in max_read_size and max_write_size variables. max_read_size: 128k 2399MiB/s 256k 2368MiB/s 512k 1986MiB/s 1024 1790MiB/s max_write_size: 128k 1712MiB/s 256k 1651MiB/s 512k 1537MiB/s 1024k 1332MiB/s Note that if you run dm-crypt inside a virtual machine, you may need to do "echo numa >/sys/module/workqueue/parameters/default_affinity_scope" to improve performance. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com>
2024-07-03 15:00:29 +02:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
dm crypt: fix error with too large bios When dm-crypt processes writes, it allocates a new bio in crypt_alloc_buffer(). The bio is allocated from a bio set and it can have at most BIO_MAX_PAGES vector entries, however the incoming bio can be larger (e.g. if it was allocated by bcache). If the incoming bio is larger, bio_alloc_bioset() fails and an error is returned. To avoid the error, we test for a too large bio in the function crypt_map() and use dm_accept_partial_bio() to split the bio. dm_accept_partial_bio() trims the current bio to the desired size and asks DM core to send another bio with the rest of the data. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.16+
2016-08-30 16:38:42 -04:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm: don't return errnos from ->map Instead use the special DM_MAPIO_KILL return value to return -EIO just like we do for the request based path. Note that dm-log-writes returned -ENOMEM in a few places, which now becomes -EIO instead. No consumer treats -ENOMEM special so this shouldn't be an issue (and it should use a mempool to start with to make guaranteed progress). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:02 +02:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm: don't return errnos from ->map Instead use the special DM_MAPIO_KILL return value to return -EIO just like we do for the request based path. Note that dm-log-writes returned -ENOMEM in a few places, which now becomes -EIO instead. No consumer treats -ENOMEM special so this shouldn't be an issue (and it should use a mempool to start with to make guaranteed progress). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:02 +02:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm crypt: use per-bio data Change dm-crypt so that it uses auxiliary data allocated with the bio. Dm-crypt requires two allocations per request - struct dm_crypt_io and struct ablkcipher_request (with other data appended to it). It previously only used mempool allocations. Some requests may require more dm_crypt_ios and ablkcipher_requests, however most requests need just one of each of these two structures to complete. This patch changes it so that the first dm_crypt_io and ablkcipher_request are allocated with the bio (using target per_bio_data_size option). If the request needs additional values, they are allocated from the mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-28 15:51:55 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: avoid assignment in if conditions Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-01 21:17:44 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm: convert to bioset_init()/mempool_init() Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-20 18:25:53 -04:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: introduce new format of cipher with "capi:" prefix For the new authenticated encryption we have to support generic composed modes (combination of encryption algorithm and authenticator) because this is how the kernel crypto API accesses such algorithms. To simplify the interface, we accept an algorithm directly in crypto API format. The new format is recognised by the "capi:" prefix. The dmcrypt internal IV specification is the same as for the old format. The crypto API cipher specifications format is: capi:cipher_api_spec-ivmode[:ivopts] Examples: capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256) capi:xts(aes)-plain64 (equivalent to old aes-xts-plain64) Examples of authenticated modes: capi:gcm(aes)-random capi:authenc(hmac(sha256),xts(aes))-random capi:rfc7539(chacha20,poly1305)-random Authenticated modes can only be configured using the new cipher format. Note that this format allows user to specify arbitrary combinations that can be insecure. (Policy decision is done in cryptsetup userspace.) Authenticated encryption algorithms can be of two types, either native modes (like GCM) that performs both encryption and authentication internally, or composed modes where user can compose AEAD with separate specification of encryption algorithm and authenticator. For composed mode with HMAC (length-preserving encryption mode like an XTS and HMAC as an authenticator) we have to calculate HMAC digest size (the separate authentication key is the same size as the HMAC digest). Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get HMAC algorithm and retrieve digest size from it. Also, for HMAC composed mode we need to parse the crypto API string to get the cipher mode nested in the specification. For native AEAD mode (like GCM), we can use crypto_tfm_alg_name() API to get the cipher specification. Because the HMAC composed mode is not processed the same as the native AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and "hmac" specification for the table integrity argument is removed. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:40 +01:00
dm crypt: add cryptographic data integrity protection (authenticated encryption) Allow the use of per-sector metadata, provided by the dm-integrity module, for integrity protection and persistently stored per-sector Initialization Vector (IV). The underlying device must support the "DM-DIF-EXT-TAG" dm-integrity profile. The per-bio integrity metadata is allocated by dm-crypt for every bio. Example of low-level mapping table for various types of use: DEV=/dev/sdb SIZE=417792 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key SIZE_INT=389952 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)" # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space) SIZE_INT=393024 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:28:aead" # Random IV only for XTS mode (no integrity protection but provides atomic random sector change) SIZE_INT=401272 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 0 /dev/mapper/x 0 1 integrity:16:none" # Random IV with XTS + HMAC integrity protection SIZE_INT=377656 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0" dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \ 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \ 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \ 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)" Both AEAD and HMAC protection authenticates not only data but also sector metadata. HMAC protection is implemented through autenc wrapper (so it is processed the same way as an authenticated mode). In HMAC mode there are two keys (concatenated in dm-crypt mapping table). First is the encryption key and the second is the key for authentication (HMAC). (It is userspace decision if these keys are independent or somehow derived.) The sector request for AEAD/HMAC authenticated encryption looks like this: |----- AAD -------|------ DATA -------|-- AUTH TAG --| | (authenticated) | (auth+encryption) | | | sector_LE | IV | sector in/out | tag in/out | For writes, the integrity fields are calculated during AEAD encryption of every sector and stored in bio integrity fields and sent to underlying dm-integrity target for storage. For reads, the integrity metadata is verified during AEAD decryption of every sector (they are filled in by dm-integrity, but the integrity fields are pre-allocated in dm-crypt). There is also an experimental support in cryptsetup utility for more friendly configuration (part of LUKS2 format). Because the integrity fields are not valid on initial creation, the device must be "formatted". This can be done by direct-io writes to the device (e.g. dd in direct-io mode). For now, there is available trivial tool to do this, see: https://github.com/mbroz/dm_int_tools Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Vashek Matyas <matyas@fi.muni.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-04 20:23:54 +01:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: use dm_submit_bio_remap Care was taken to support kcryptd_io_read being called from crypt_map or workqueue. Use of an intermediate CRYPT_MAP_READ_GFP gfp_t (defined as GFP_NOWAIT) should protect from maintenance burden if that flag were to change for some reason. Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-02-17 23:40:35 -05:00
dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:25:59 -05:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: map and endio symbolic return codes Update existing targets to use the new symbols for return values from target map and end_io functions. There is no effect on behaviour. Test results: Done build test without errors. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:41:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: make printing of the key constant-time The device mapper dm-crypt target is using scnprintf("%02x", cc->key[i]) to report the current key to userspace. However, this is not a constant-time operation and it may leak information about the key via timing, via cache access patterns or via the branch predictor. Change dm-crypt's key printing to use "%c" instead of "%02x". Also introduce hex2asc() that carefully avoids any branching or memory accesses when converting a number in the range 0 ... 15 to an ascii character. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-25 08:53:29 -04:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: make printing of the key constant-time The device mapper dm-crypt target is using scnprintf("%02x", cc->key[i]) to report the current key to userspace. However, this is not a constant-time operation and it may leak information about the key via timing, via cache access patterns or via the branch predictor. Change dm-crypt's key printing to use "%c" instead of "%02x". Also introduce hex2asc() that carefully avoids any branching or memory accesses when converting a number in the range 0 ... 15 to an ascii character. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-25 08:53:29 -04:00
dm: fix truncated status strings Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:44 +00:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
dm crypt: use unbound workqueue for request processing Use unbound workqueue by default so that work is automatically balanced between available CPUs. The original behavior of encrypting using the same cpu that IO was submitted on can still be enabled by setting the optional 'same_cpu_crypt' table argument. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:09 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:52 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: make printing of the key constant-time The device mapper dm-crypt target is using scnprintf("%02x", cc->key[i]) to report the current key to userspace. However, this is not a constant-time operation and it may leak information about the key via timing, via cache access patterns or via the branch predictor. Change dm-crypt's key printing to use "%c" instead of "%02x". Also introduce hex2asc() that carefully avoids any branching or memory accesses when converting a number in the range 0 ... 15 to an ascii character. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-25 08:53:29 -04:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm: fix truncated status strings Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: remove SECTOR_FORMAT We don't know what type sector_t has. Sometimes it's unsigned long, sometimes it's unsigned long long. For example on ppc64 it's unsigned long with CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n. The way to handle all of this is to always use unsigned long long and to always typecast the sector_t when printing it. Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:17:48 -08:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: use unbound workqueue for request processing Use unbound workqueue by default so that work is automatically balanced between available CPUs. The original behavior of encrypting using the same cpu that IO was submitted on can still be enabled by setting the optional 'same_cpu_crypt' table argument. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:09 -05:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm crypt: add 'submit_from_crypt_cpus' option Make it possible to disable offloading writes by setting the optional 'submit_from_crypt_cpus' table argument. There are some situations where offloading write bios from the encryption threads to a single thread degrades performance significantly. The default is to offload write bios to the same thread because it benefits CFQ to have writes submitted using the same IO context. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:08 -05:00
dm crypt: add flags to optionally bypass kcryptd workqueues This is a follow up to [1] that detailed latency problems associated with dm-crypt's use of workqueues when processing IO. Current dm-crypt implementation creates a significant IO performance overhead (at least on small IO block sizes) for both latency and throughput. We suspect offloading IO request processing into workqueues and async threads is more harmful these days with the modern fast storage. I also did some digging into the dm-crypt git history and much of this async processing is not needed anymore, because the reasons it was added are mostly gone from the kernel. More details can be found in [2] (see "Git archeology" section). This change adds DM_CRYPT_NO_READ_WORKQUEUE and DM_CRYPT_NO_WRITE_WORKQUEUE flags for read and write BIOs, which direct dm-crypt to not offload crypto operations into kcryptd workqueues. In addition, writes are not buffered to be sorted in the dm-crypt red-black tree, but dispatched immediately. For cases, where crypto operations cannot happen (hard interrupt context, for example the read path of some NVME drivers), we offload the work to a tasklet rather than a workqueue. These flags only ensure no async BIO processing in the dm-crypt module. It is worth noting that some Crypto API implementations may offload encryption into their own workqueues, which are independent of the dm-crypt and its configuration. However upon enabling these new flags dm-crypt will instruct Crypto API not to backlog crypto requests. To give an idea of the performance gains for certain workloads, consider the script, and results when tested against various devices, detailed here: https://www.redhat.com/archives/dm-devel/2020-July/msg00138.html [1]: https://www.spinics.net/lists/dm-crypt/msg07516.html [2]: https://blog.cloudflare.com/speeding-up-linux-disk-encryption/ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-06 18:37:31 +01:00
dm-crypt: Allow to specify the integrity key size as option For the MAC based integrity operation, the integrity key size (i.e. key_mac_size) is currently set to the digest size of the used digest. For wrapped key HMAC algorithms, the key size is independent of the cryptographic key size. So there is no known size of the mac key in such cases. The desired key size can optionally be specified as argument when the dm-crypt device is configured via 'integrity_key_size:%u'. If no integrity_key_size argument is specified, the mac key size is still set to the digest size, as before. Increase version number to 1.28.0 so that support for the new argument can be detected by user space (i.e. cryptsetup). Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-08-16 13:21:33 +02:00
dm crypt: use shifts instead of sector_div sector_div is very slow, so we introduce a variable sector_shift and use shift instead of sector_div. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-23 10:23:14 -04:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm-crypt: Allow to specify the integrity key size as option For the MAC based integrity operation, the integrity key size (i.e. key_mac_size) is currently set to the digest size of the used digest. For wrapped key HMAC algorithms, the key size is independent of the cryptographic key size. So there is no known size of the mac key in such cases. The desired key size can optionally be specified as argument when the dm-crypt device is configured via 'integrity_key_size:%u'. If no integrity_key_size argument is specified, the mac key size is still set to the digest size, as before. Increase version number to 1.28.0 so that support for the new argument can be detected by user space (i.e. cryptsetup). Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-08-16 13:21:33 +02:00
dm crypt: use unbound workqueue for request processing Use unbound workqueue by default so that work is automatically balanced between available CPUs. The original behavior of encrypting using the same cpu that IO was submitted on can still be enabled by setting the optional 'same_cpu_crypt' table argument. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:09 -05:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm crypt: add 'submit_from_crypt_cpus' option Make it possible to disable offloading writes by setting the optional 'submit_from_crypt_cpus' table argument. There are some situations where offloading write bios from the encryption threads to a single thread degrades performance significantly. The default is to offload write bios to the same thread because it benefits CFQ to have writes submitted using the same IO context. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:27:08 -05:00
dm crypt: add flags to optionally bypass kcryptd workqueues This is a follow up to [1] that detailed latency problems associated with dm-crypt's use of workqueues when processing IO. Current dm-crypt implementation creates a significant IO performance overhead (at least on small IO block sizes) for both latency and throughput. We suspect offloading IO request processing into workqueues and async threads is more harmful these days with the modern fast storage. I also did some digging into the dm-crypt git history and much of this async processing is not needed anymore, because the reasons it was added are mostly gone from the kernel. More details can be found in [2] (see "Git archeology" section). This change adds DM_CRYPT_NO_READ_WORKQUEUE and DM_CRYPT_NO_WRITE_WORKQUEUE flags for read and write BIOs, which direct dm-crypt to not offload crypto operations into kcryptd workqueues. In addition, writes are not buffered to be sorted in the dm-crypt red-black tree, but dispatched immediately. For cases, where crypto operations cannot happen (hard interrupt context, for example the read path of some NVME drivers), we offload the work to a tasklet rather than a workqueue. These flags only ensure no async BIO processing in the dm-crypt module. It is worth noting that some Crypto API implementations may offload encryption into their own workqueues, which are independent of the dm-crypt and its configuration. However upon enabling these new flags dm-crypt will instruct Crypto API not to backlog crypto requests. To give an idea of the performance gains for certain workloads, consider the script, and results when tested against various devices, detailed here: https://www.redhat.com/archives/dm-devel/2020-July/msg00138.html [1]: https://www.spinics.net/lists/dm-crypt/msg07516.html [2]: https://blog.cloudflare.com/speeding-up-linux-disk-encryption/ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-06 18:37:31 +01:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm-crypt: Allow to specify the integrity key size as option For the MAC based integrity operation, the integrity key size (i.e. key_mac_size) is currently set to the digest size of the used digest. For wrapped key HMAC algorithms, the key size is independent of the cryptographic key size. So there is no known size of the mac key in such cases. The desired key size can optionally be specified as argument when the dm-crypt device is configured via 'integrity_key_size:%u'. If no integrity_key_size argument is specified, the mac key size is still set to the digest size, as before. Increase version number to 1.28.0 so that support for the new argument can be detected by user space (i.e. cryptsetup). Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-08-16 13:21:33 +02:00
dm crypt: use unbound workqueue for request processing Use unbound workqueue by default so that work is automatically balanced between available CPUs. The original behavior of encrypting using the same cpu that IO was submitted on can still be enabled by setting the optional 'same_cpu_crypt' table argument. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-13 08:23:09 -05:00
dm: update target status functions to support IMA measurement For device mapper targets to take advantage of IMA's measurement capabilities, the status functions for the individual targets need to be updated to handle the status_type_t case for value STATUSTYPE_IMA. Update status functions for the following target types, to log their respective attributes to be measured using IMA. 01. cache 02. crypt 03. integrity 04. linear 05. mirror 06. multipath 07. raid 08. snapshot 09. striped 10. verity For rest of the targets, handle the STATUSTYPE_IMA case by setting the measurement buffer to NULL. For IMA to measure the data on a given system, the IMA policy on the system needs to be updated to have the following line, and the system needs to be restarted for the measurements to take effect. /etc/ima/ima-policy measure func=CRITICAL_DATA label=device-mapper template=ima-buf The measurements will be reflected in the IMA logs, which are located at: /sys/kernel/security/integrity/ima/ascii_runtime_measurements /sys/kernel/security/integrity/ima/binary_runtime_measurements These IMA logs can later be consumed by various attestation clients running on the system, and send them to external services for attesting the system. The DM target data measured by IMA subsystem can alternatively be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with DM_TABLE_STATUS_CMD. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-12 17:49:03 -07:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm: update target status functions to support IMA measurement For device mapper targets to take advantage of IMA's measurement capabilities, the status functions for the individual targets need to be updated to handle the status_type_t case for value STATUSTYPE_IMA. Update status functions for the following target types, to log their respective attributes to be measured using IMA. 01. cache 02. crypt 03. integrity 04. linear 05. mirror 06. multipath 07. raid 08. snapshot 09. striped 10. verity For rest of the targets, handle the STATUSTYPE_IMA case by setting the measurement buffer to NULL. For IMA to measure the data on a given system, the IMA policy on the system needs to be updated to have the following line, and the system needs to be restarted for the measurements to take effect. /etc/ima/ima-policy measure func=CRITICAL_DATA label=device-mapper template=ima-buf The measurements will be reflected in the IMA logs, which are located at: /sys/kernel/security/integrity/ima/ascii_runtime_measurements /sys/kernel/security/integrity/ima/binary_runtime_measurements These IMA logs can later be consumed by various attestation clients running on the system, and send them to external services for attesting the system. The DM target data measured by IMA subsystem can alternatively be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with DM_TABLE_STATUS_CMD. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-12 17:49:03 -07:00
dm-crypt: add the optional "high_priority" flag When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was reported that dm-crypt performs badly when the system is loaded[1]. Because of reports of audio skipping, dm-crypt stopped using WQ_HIGHPRI with commit f612b2132db5 (Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"). But it has since been determined that WQ_HIGHPRI provides improved performance (with reduced latency) for highend systems with much more resources than those laptop/desktop users which suffered from the use of WQ_HIGHPRI. As such, add an option "high_priority" that allows the use of WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to nice level MIN_NICE (-20). This commit makes it optional, so that normal users won't be harmed by it. [1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-04-08 21:36:56 +02:00
dm: update target status functions to support IMA measurement For device mapper targets to take advantage of IMA's measurement capabilities, the status functions for the individual targets need to be updated to handle the status_type_t case for value STATUSTYPE_IMA. Update status functions for the following target types, to log their respective attributes to be measured using IMA. 01. cache 02. crypt 03. integrity 04. linear 05. mirror 06. multipath 07. raid 08. snapshot 09. striped 10. verity For rest of the targets, handle the STATUSTYPE_IMA case by setting the measurement buffer to NULL. For IMA to measure the data on a given system, the IMA policy on the system needs to be updated to have the following line, and the system needs to be restarted for the measurements to take effect. /etc/ima/ima-policy measure func=CRITICAL_DATA label=device-mapper template=ima-buf The measurements will be reflected in the IMA logs, which are located at: /sys/kernel/security/integrity/ima/ascii_runtime_measurements /sys/kernel/security/integrity/ima/binary_runtime_measurements These IMA logs can later be consumed by various attestation clients running on the system, and send them to external services for attesting the system. The DM target data measured by IMA subsystem can alternatively be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with DM_TABLE_STATUS_CMD. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-12 17:49:03 -07:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm: update target status functions to support IMA measurement For device mapper targets to take advantage of IMA's measurement capabilities, the status functions for the individual targets need to be updated to handle the status_type_t case for value STATUSTYPE_IMA. Update status functions for the following target types, to log their respective attributes to be measured using IMA. 01. cache 02. crypt 03. integrity 04. linear 05. mirror 06. multipath 07. raid 08. snapshot 09. striped 10. verity For rest of the targets, handle the STATUSTYPE_IMA case by setting the measurement buffer to NULL. For IMA to measure the data on a given system, the IMA policy on the system needs to be updated to have the following line, and the system needs to be restarted for the measurements to take effect. /etc/ima/ima-policy measure func=CRITICAL_DATA label=device-mapper template=ima-buf The measurements will be reflected in the IMA logs, which are located at: /sys/kernel/security/integrity/ima/ascii_runtime_measurements /sys/kernel/security/integrity/ima/binary_runtime_measurements These IMA logs can later be consumed by various attestation clients running on the system, and send them to external services for attesting the system. The DM target data measured by IMA subsystem can alternatively be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with DM_TABLE_STATUS_CMD. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-12 17:49:03 -07:00
dm-crypt: support for per-sector NVMe metadata Support per-sector NVMe metadata in dm-crypt. This commit changes dm-crypt, so that it can use NVMe metadata to store authentication information. We can put dm-crypt directly on the top of NVMe device, without using dm-integrity. This commit improves write throughput twice, becase the will be no writes to the dm-integrity journal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-08 22:06:58 +02:00
dm: update target status functions to support IMA measurement For device mapper targets to take advantage of IMA's measurement capabilities, the status functions for the individual targets need to be updated to handle the status_type_t case for value STATUSTYPE_IMA. Update status functions for the following target types, to log their respective attributes to be measured using IMA. 01. cache 02. crypt 03. integrity 04. linear 05. mirror 06. multipath 07. raid 08. snapshot 09. striped 10. verity For rest of the targets, handle the STATUSTYPE_IMA case by setting the measurement buffer to NULL. For IMA to measure the data on a given system, the IMA policy on the system needs to be updated to have the following line, and the system needs to be restarted for the measurements to take effect. /etc/ima/ima-policy measure func=CRITICAL_DATA label=device-mapper template=ima-buf The measurements will be reflected in the IMA logs, which are located at: /sys/kernel/security/integrity/ima/ascii_runtime_measurements /sys/kernel/security/integrity/ima/binary_runtime_measurements These IMA logs can later be consumed by various attestation clients running on the system, and send them to external services for attesting the system. The DM target data measured by IMA subsystem can alternatively be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with DM_TABLE_STATUS_CMD. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-12 17:49:03 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm: change "unsigned" to "unsigned int" Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-01-25 21:14:58 +01:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm table: share target argument parsing functions Move multipath target argument parsing code into dm-table so other targets can share it. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:04 +01:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm table: share target argument parsing functions Move multipath target argument parsing code into dm-table so other targets can share it. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:04 +01:00
dm crypt: add ability to use keys from the kernel key retention service The kernel key service is a generic way to store keys for the use of other subsystems. Currently there is no way to use kernel keys in dm-crypt. This patch aims to fix that. Instead of key userspace may pass a key description with preceding ':'. So message that constructs encryption mapping now looks like this: <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>] where <key_string> is in format: <key_size>:<key_type>:<key_description> Currently we only support two elementary key types: 'user' and 'logon'. Keys may be loaded in dm-crypt either via <key_string> or using classical method and pass the key in hex representation directly. dm-crypt device initialised with a key passed in hex representation may be replaced with key passed in key_string format and vice versa. (Based on original work by Andrey Ryabinin) Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 15:58:51 +01:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
dm crypt: wipe kernel key copy after IV initialization Loading key via kernel keyring service erases the internal key copy immediately after we pass it in crypto layer. This is wrong because IV is initialized later and we use wrong key for the initialization (instead of real key there's just zeroed block). The bug may cause data corruption if key is loaded via kernel keyring service first and later same crypt device is reactivated using exactly same key in hexbyte representation, or vice versa. The bug (and fix) affects only ciphers using following IVs: essiv, lmk and tcw. Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service") Cc: stable@vger.kernel.org # 4.10+ Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-12 16:30:32 +01:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
dm crypt: wipe private IV struct after key invalid flag is set If a private IV wipe function fails, the code does not set the key invalid flag. To fix this, move code to after the flag is set to prevent the device from resuming in an inconsistent state. Also, this allows using of a randomized key in private wipe function (to be used in a following commit). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09 15:22:12 +02:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm target:s introduce iterate devices fn Add .iterate_devices to 'struct target_type' to allow a function to be called for all devices in a DM target. Implemented it for all targets except those in dm-snap.c (origin and snapshot). (The raid1 version number jumps to 1.12 because we originally reserved 1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors' instead.) Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: martin.petersen@oracle.com
2009-06-22 10:12:33 +01:00
dm table: pass correct dev area size to device_area_is_valid Incorrect device area lengths are being passed to device_area_is_valid(). The regression appeared in 2.6.31-rc1 through commit 754c5fc7ebb417b23601a6222a6005cc2e7f2913. With the dm-stripe target, the size of the target (ti->len) was used instead of the stripe_width (ti->len/#stripes). An example of a consequent incorrect error message is: device-mapper: table: 254:0: sdb too small for target Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-07-23 20:30:42 +01:00
dm target:s introduce iterate devices fn Add .iterate_devices to 'struct target_type' to allow a function to be called for all devices in a DM target. Implemented it for all targets except those in dm-snap.c (origin and snapshot). (The raid1 version number jumps to 1.12 because we originally reserved 1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors' instead.) Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: martin.petersen@oracle.com
2009-06-22 10:12:33 +01:00
dm crypt: constrain crypt device's max_segment_size to PAGE_SIZE Setting the dm-crypt device's max_segment_size to PAGE_SIZE is an unfortunate constraint that is required to avoid the potential for exceeding dm-crypt's underlying device's max_segments limits -- due to crypt_alloc_buffer() possibly allocating pages for the encryption bio that are not as physically contiguous as the original bio. It is interesting to note that this problem was already fixed back in 2007 via commit 91e106259 ("dm crypt: use bio_add_page"). But Linux 4.0 commit cf2f1abfb ("dm crypt: don't allocate pages for a partial request") regressed dm-crypt back to _not_ using bio_add_page(). But given dm-crypt's cpu parallelization changes all depend on commit cf2f1abfb's abandoning of the more complex io fragments processing that dm-crypt previously had we cannot easily go back to using bio_add_page(). So all said the cleanest way to resolve this issue is to fix dm-crypt to properly constrain the original bios entering dm-crypt so the encryption bios that dm-crypt generates from the original bios are always compatible with the underlying device's max_segments queue limits. It should be noted that technically Linux 4.3 does _not_ need this fix because of the block core's new late bio-splitting capability. But, it is reasoned, there is little to be gained by having the block core split the encrypted bio that is composed of PAGE_SIZE segments. That said, in the future we may revert this change. Fixes: cf2f1abfb ("dm crypt: don't allocate pages for a partial request") Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=104421 Suggested-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.0+
2015-09-09 21:34:51 -04:00
dm crypt: optionally support larger encryption sector size Add optional "sector_size" parameter that specifies encryption sector size (atomic unit of block device encryption). Parameter can be in range 512 - 4096 bytes and must be power of two. For compatibility reasons, the maximal IO must fit into the page limit, so the limit is set to the minimal page size possible (4096 bytes). NOTE: this device cannot yet be handled by cryptsetup if this parameter is set. IV for the sector is calculated from the 512 bytes sector offset unless the iv_large_sectors option is used. Test script using dmsetup: DEV="/dev/sdb" DEV_SIZE=$(blockdev --getsz $DEV) KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac" BLOCK_SIZE=4096 # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE" # dmsetup table --showkeys test_crypt Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16 15:39:44 +01:00
dm: provide helper to set stacked limits There are multiple device mappers that set up their stacking limits exactly the same for the logical, physical and minimum IO queue limits. Provide a helper for it. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-03-25 12:36:08 -07:00
dm-crypt: provide dma_alignment limit in io_hints This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Link: https://lore.kernel.org/linux-block/20221101001558.648ee024@xps.demsh.org/ Fixes: b1a000d3b8ec5 ("block: relax direct io memory alignment") Reportred-by: Eric Biggers <ebiggers@kernel.org> Reported-by: Dmitrii Tcvetkov <me@demsh.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-3-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-10 10:44:58 -08:00
dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices. Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-25 18:33:26 +09:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
dm crypt: constrain crypt device's max_segment_size to PAGE_SIZE Setting the dm-crypt device's max_segment_size to PAGE_SIZE is an unfortunate constraint that is required to avoid the potential for exceeding dm-crypt's underlying device's max_segments limits -- due to crypt_alloc_buffer() possibly allocating pages for the encryption bio that are not as physically contiguous as the original bio. It is interesting to note that this problem was already fixed back in 2007 via commit 91e106259 ("dm crypt: use bio_add_page"). But Linux 4.0 commit cf2f1abfb ("dm crypt: don't allocate pages for a partial request") regressed dm-crypt back to _not_ using bio_add_page(). But given dm-crypt's cpu parallelization changes all depend on commit cf2f1abfb's abandoning of the more complex io fragments processing that dm-crypt previously had we cannot easily go back to using bio_add_page(). So all said the cleanest way to resolve this issue is to fix dm-crypt to properly constrain the original bios entering dm-crypt so the encryption bios that dm-crypt generates from the original bios are always compatible with the underlying device's max_segments queue limits. It should be noted that technically Linux 4.3 does _not_ need this fix because of the block core's new late bio-splitting capability. But, it is reasoned, there is little to be gained by having the block core split the encrypted bio that is composed of PAGE_SIZE segments. That said, in the future we may revert this change. Fixes: cf2f1abfb ("dm crypt: don't allocate pages for a partial request") Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=104421 Suggested-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.0+
2015-09-09 21:34:51 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm-crypt: enable DM_TARGET_ATOMIC_WRITES Allow handling of bios with REQ_ATOMIC flag set. Don't split these bios and fail them if they overrun the hard limit "BIO_MAX_VECS << PAGE_SHIFT". In order to simplify the code, this commit joins the logic that avoids splitting emulated zone append bios with the logic that avoids splitting atomic write bios. Signed-off-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: John Garry <john.g.garry@oracle.com>
2025-11-05 16:02:36 +01:00
dm crypt: Enable zoned block device support Enable support for zoned block devices. This is done by: 1) implementing the target report_zones method. 2) adding the DM_TARGET_ZONED_HM flag to the target features. 3) setting DM_CRYPT_NO_WRITE_WORKQUEUE flag to avoid IO processing via workqueue. 4) Introducing inline write encryption completion to preserve write ordering. The last point is implemented by introducing the internal flag DM_CRYPT_WRITE_INLINE. When set, kcryptd_crypt_write_convert() always waits inline for the completion of a write request encryption if the request is not already completed once crypt_convert() returns. Completion of write request encryption is signaled using the restart completion by kcryptd_async_done(). This mechanism allows using ciphers that have an asynchronous implementation, isolating dm-crypt from any potential request completion reordering for these ciphers. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08 18:28:08 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm target:s introduce iterate devices fn Add .iterate_devices to 'struct target_type' to allow a function to be called for all devices in a DM target. Implemented it for all targets except those in dm-snap.c (origin and snapshot). (The raid1 version number jumps to 1.12 because we originally reserved 1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors' instead.) Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: martin.petersen@oracle.com
2009-06-22 10:12:33 +01:00
dm crypt: constrain crypt device's max_segment_size to PAGE_SIZE Setting the dm-crypt device's max_segment_size to PAGE_SIZE is an unfortunate constraint that is required to avoid the potential for exceeding dm-crypt's underlying device's max_segments limits -- due to crypt_alloc_buffer() possibly allocating pages for the encryption bio that are not as physically contiguous as the original bio. It is interesting to note that this problem was already fixed back in 2007 via commit 91e106259 ("dm crypt: use bio_add_page"). But Linux 4.0 commit cf2f1abfb ("dm crypt: don't allocate pages for a partial request") regressed dm-crypt back to _not_ using bio_add_page(). But given dm-crypt's cpu parallelization changes all depend on commit cf2f1abfb's abandoning of the more complex io fragments processing that dm-crypt previously had we cannot easily go back to using bio_add_page(). So all said the cleanest way to resolve this issue is to fix dm-crypt to properly constrain the original bios entering dm-crypt so the encryption bios that dm-crypt generates from the original bios are always compatible with the underlying device's max_segments queue limits. It should be noted that technically Linux 4.3 does _not_ need this fix because of the block core's new late bio-splitting capability. But, it is reasoned, there is little to be gained by having the block core split the encrypted bio that is composed of PAGE_SIZE segments. That said, in the future we may revert this change. Fixes: cf2f1abfb ("dm crypt: don't allocate pages for a partial request") Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=104421 Suggested-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.0+
2015-09-09 21:34:51 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: add helper macro for simple DM target module init and exit Eliminate duplicate boilerplate code for simple modules that contain a single DM target driver without any additional setup code. Add a new module_dm() macro, which replaces the module_init() and module_exit() with template functions that call dm_register_target() and dm_unregister_target() respectively. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-04-10 00:43:37 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt, dm zero: update author name following legal name change Signed-off-by: Jana Saout <jana@saout.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-06-24 14:27:04 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00