linux

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2017-11-01 15:07:57 +01:00

vfio: Split virqfd into a separate module for vfio bus drivers An unintended consequence of commit 42ac9bd18d4f ("vfio: initialize the virqfd workqueue in VFIO generic code") is that the vfio module is renamed to vfio_core so that it can include both vfio and virqfd. That's a user visible change that may break module loading scritps and it imposes eventfd support as a dependency on the core vfio code, which it's really not. virqfd is intended to be provided as a service to vfio bus drivers, so instead of wrapping it into vfio.ko, we can make it a stand-alone module toggled by vfio bus drivers. This has the additional benefit of removing initialization and exit from the core vfio code. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2015-03-17 08:33:38 -06:00

vfio: Add an IOVA bitmap support The new facility adds a bunch of wrappers that abstract how an IOVA range is represented in a bitmap that is granulated by a given page_size. So it translates all the lifting of dealing with user pointers into its corresponding kernel addresses backing said user memory into doing finally the (non-atomic) bitmap ops to change various bits. The formula for the bitmap is: data[(iova / page_size) / 64] & (1ULL << (iova % 64)) Where 64 is the number of bits in a unsigned long (depending on arch) It introduces an IOVA iterator that uses a windowing scheme to minimize the pinning overhead, as opposed to pinning it on demand 4K at a time. Assuming a 4K kernel page and 4K requested page size, we can use a single kernel page to hold 512 page pointers, mapping 2M of bitmap, representing 64G of IOVA space. An example usage of these helpers for a given @base_iova, @page_size, @length and __user @data: bitmap = iova_bitmap_alloc(base_iova, page_size, length, data); if (IS_ERR(bitmap)) return -ENOMEM; ret = iova_bitmap_for_each(bitmap, arg, dirty_reporter_fn); iova_bitmap_free(bitmap); Each iteration of the @dirty_reporter_fn is called with a unique @iova and @length argument, indicating the current range available through the iova_bitmap. The @dirty_reporter_fn uses iova_bitmap_set() to mark dirty areas (@iova_length) within that provided range, as following: iova_bitmap_set(bitmap, iova, iova_length); The facility is intended to be used for user bitmaps representing dirtied IOVAs by IOMMU (via IOMMUFD) and PCI Devices (via vfio-pci). Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20220908183448.195262-5-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2022-09-08 21:34:42 +03:00

vfio: Move iova_bitmap into iommufd Both VFIO and IOMMUFD will need iova bitmap for storing dirties and walking the user bitmaps, so move to the common dependency into IOMMUFD. In doing so, create the symbol IOMMUFD_DRIVER which designates the builtin code that will be used by drivers when selected. Today this means MLX5_VFIO_PCI and PDS_VFIO_PCI. IOMMU drivers will do the same (in future patches) when supporting dirty tracking and select IOMMUFD_DRIVER accordingly. Given that the symbol maybe be disabled, add header definitions in iova_bitmap.h for when IOMMUFD_DRIVER=n Link: https://lore.kernel.org/r/20231024135109.73787-3-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

2023-10-24 14:50:53 +01:00

vfio: Add cdev for vfio_device This adds cdev support for vfio_device. It allows the user to directly open a vfio device w/o using the legacy container/group interface, as a prerequisite for supporting new iommu features like nested translation and etc. The device fd opened in this manner doesn't have the capability to access the device as the fops open() doesn't open the device until the successful VFIO_DEVICE_BIND_IOMMUFD ioctl which will be added in a later patch. With this patch, devices registered to vfio core would have both the legacy group and the new device interfaces created. - group interface : /dev/vfio/$groupID - device interface: /dev/vfio/devices/vfioX - normal device ("X" is a unique number across vfio devices) For a given device, the user can identify the matching vfioX by searching the vfio-dev folder under the sysfs path of the device. Take PCI device (0000:6a:01.0) as an example, /sys/bus/pci/devices/0000\:6a\:01.0/vfio-dev/vfioX implies the matching vfioX under /dev/vfio/devices/, and vfio-dev/vfioX/dev contains the major:minor number of the matching /dev/vfio/devices/vfioX. The user can get device fd by opening the /dev/vfio/devices/vfioX. The vfio_device cdev logic in this patch: *) __vfio_register_dev() path ends up doing cdev_device_add() for each vfio_device if VFIO_DEVICE_CDEV configured. *) vfio_unregister_group_dev() path does cdev_device_del(); cdev interface does not support noiommu devices, so VFIO only creates the legacy group interface for the physical devices that do not have IOMMU. noiommu users should use the legacy group interface. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-19-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2023-07-18 06:55:43 -07:00

vfio: Compile vfio_group infrastructure optionally vfio_group is not needed for vfio device cdev, so with vfio device cdev introduced, the vfio_group infrastructures can be compiled out if only cdev is needed. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-26-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2023-07-18 06:55:50 -07:00

vfio-iommufd: Support iommufd for physical VFIO devices This creates the iommufd_device for the physical VFIO drivers. These are all the drivers that are calling vfio_register_group_dev() and expect the type1 code to setup a real iommu_domain against their parent struct device. The design gives the driver a choice in how it gets connected to iommufd by providing bind_iommufd/unbind_iommufd/attach_ioas callbacks to implement as required. The core code provides three default callbacks for physical mode using a real iommu_domain. This is suitable for drivers using vfio_register_group_dev() Link: https://lore.kernel.org/r/6-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Yi Liu <yi.l.liu@intel.com> Tested-by: Lixiao Yang <lixiao.yang@intel.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yu He <yu.he@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

2022-11-29 16:31:51 -04:00

vfio: Make vfio_container optionally compiled Add a kconfig CONFIG_VFIO_CONTAINER that controls compiling the container code. If 'n' then only iommufd will provide the container service. All the support for vfio iommu drivers, including type1, will not be built. This allows a compilation check that no inappropriate dependencies between the device/group and container have been created. Link: https://lore.kernel.org/r/9-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Yi Liu <yi.l.liu@intel.com> Tested-by: Lixiao Yang <lixiao.yang@intel.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yu He <yu.he@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

2022-11-29 16:31:54 -04:00

vfio: Fold vfio_virqfd.ko into vfio.ko This is only 1.8k, putting it in its own module is not really necessary. The kconfig infrastructure is still there to completely remove it for systems that are trying for small footprint. Put it in the main vfio.ko module now that kbuild can support multiple .c files. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/5-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2022-12-05 11:29:20 -04:00

vfio/migration: Add debugfs to live migration driver There are multiple devices, software and operational steps involved in the process of live migration. An error occurred on any node may cause the live migration operation to fail. This complex process makes it very difficult to locate and analyze the cause when the function fails. In order to quickly locate the cause of the problem when the live migration fails, I added a set of debugfs to the vfio live migration driver. +-------------------------------------------+ | | | | | QEMU | | | | | +---+----------------------------+----------+ | ^ | ^ | | | | | | | | v | v | +---------+--+ +---------+--+ |src vfio_dev| |dst vfio_dev| +--+---------+ +--+---------+ | ^ | ^ | | | | v | | | +-----------+----+ +-----------+----+ |src dev debugfs | |dst dev debugfs | +----------------+ +----------------+ The entire debugfs directory will be based on the definition of the CONFIG_DEBUG_FS macro. If this macro is not enabled, the interfaces in vfio.h will be empty definitions, and the creation and initialization of the debugfs directory will not be executed. vfio | +---<dev_name1> | +---migration | +--state | +---<dev_name2> +---migration +--state debugfs will create a public root directory "vfio" file. then create a dev_name() file for each live migration device. First, create a unified state acquisition file of "migration" in this device directory. Then, create a public live migration state lookup file "state". Signed-off-by: Longfang Liu <liulongfang@huawei.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/r/20231106072225.28577-2-liulongfang@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2023-11-06 15:22:23 +08:00

vfio: Add an IOVA bitmap support The new facility adds a bunch of wrappers that abstract how an IOVA range is represented in a bitmap that is granulated by a given page_size. So it translates all the lifting of dealing with user pointers into its corresponding kernel addresses backing said user memory into doing finally the (non-atomic) bitmap ops to change various bits. The formula for the bitmap is: data[(iova / page_size) / 64] & (1ULL << (iova % 64)) Where 64 is the number of bits in a unsigned long (depending on arch) It introduces an IOVA iterator that uses a windowing scheme to minimize the pinning overhead, as opposed to pinning it on demand 4K at a time. Assuming a 4K kernel page and 4K requested page size, we can use a single kernel page to hold 512 page pointers, mapping 2M of bitmap, representing 64G of IOVA space. An example usage of these helpers for a given @base_iova, @page_size, @length and __user @data: bitmap = iova_bitmap_alloc(base_iova, page_size, length, data); if (IS_ERR(bitmap)) return -ENOMEM; ret = iova_bitmap_for_each(bitmap, arg, dirty_reporter_fn); iova_bitmap_free(bitmap); Each iteration of the @dirty_reporter_fn is called with a unique @iova and @length argument, indicating the current range available through the iova_bitmap. The @dirty_reporter_fn uses iova_bitmap_set() to mark dirty areas (@iova_length) within that provided range, as following: iova_bitmap_set(bitmap, iova, iova_length); The facility is intended to be used for user bitmaps representing dirtied IOVAs by IOMMU (via IOMMUFD) and PCI Devices (via vfio-pci). Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20220908183448.195262-5-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2022-09-08 21:34:42 +03:00

vfio: Type1 IOMMU implementation This VFIO IOMMU backend is designed primarily for AMD-Vi and Intel VT-d hardware, but is potentially usable by anything supporting similar mapping functionality. We arbitrarily call this a Type1 backend for lack of a better name. This backend has no IOVA or host memory mapping restrictions for the user and is optimized for relatively static mappings. Mapped areas are pinned into system memory. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2012-07-31 08:16:23 -06:00

powerpc/vfio: Implement IOMMU driver for VFIO VFIO implements platform independent stuff such as a PCI driver, BAR access (via read/write on a file descriptor or direct mapping when possible) and IRQ signaling. The platform dependent part includes IOMMU initialization and handling. This implements an IOMMU driver for VFIO which does mapping/unmapping pages for the guest IO and provides information about DMA window (required by a POWER guest). Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

2013-05-21 13:33:10 +10:00

vfio/pci: Cleanup Kconfig It should be possible to select vfio-pci variant drivers without building vfio-pci itself, which implies each variant driver should select vfio-pci-core. Fix the top level vfio Makefile to traverse pci based on vfio-pci-core rather than vfio-pci. Mark MMAP and INTX options depending on vfio-pci-core to cleanup resulting config if core is not enabled. Push all PCI related vfio options to a sub-menu and make descriptions consistent. Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20230614193948.477036-2-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2023-06-14 13:39:46 -06:00

vfio/platform: Cleanup Kconfig Like vfio-pci, there's also a base module here where vfio-amba depends on vfio-platform, when really it only needs vfio-platform-base. Create a sub-menu for platform drivers and a nested menu for reset drivers. Cleanup Makefile to make use of new CONFIG_VFIO_PLATFORM_BASE for building the shared modules and traversing reset modules. Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20230614193948.477036-3-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2023-06-14 13:39:47 -06:00

2016-11-17 02:16:13 +05:30

vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2020-10-05 20:36:45 +03:00

vfio/cdx: add support for CDX bus vfio-cdx driver enables IOCTLs for user space to query MMIO regions for CDX devices and mmap them. This change also adds support for reset of CDX devices. With VFIO enabled on CDX devices, user-space applications can also exercise DMA securely via IOMMU on these devices. This change adds the VFIO CDX driver and enables the following ioctls for CDX devices: - VFIO_DEVICE_GET_INFO: - VFIO_DEVICE_GET_REGION_INFO - VFIO_DEVICE_RESET Signed-off-by: Nipun Gupta <nipun.gupta@amd.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com> Link: https://lore.kernel.org/r/20230531124557.11009-1-nipun.gupta@amd.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

2023-05-31 18:15:57 +05:30

18 lines 632 B Raw Permalink Normal View History

18 lines

632 B

Raw Permalink Normal View History