linux/fs/ceph/locks.c

528 lines
14 KiB

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
ceph: convert inode flags to named bit positions and atomic bitops Define named bit-position constants for all CEPH_I_* inode flags and derive the bitmask values from them. This gives every flag a named _BIT constant usable with the test_bit/set_bit/clear_bit family. The intentionally unused bit position 1 is documented inline. Convert all flag modifications to use atomic bitops (set_bit, clear_bit, test_and_clear_bit). The previous code mixed lockless atomic ops on some flags (ERROR_WRITE, ODIRECT) with non-atomic read-modify-write (|= / &= ~) on other flags sharing the same unsigned long. A concurrent non-atomic RMW can clobber an adjacent lockless atomic update -- for example, a lockless clear_bit(ERROR_WRITE) could be silently resurrected by a concurrent ci->i_ceph_flags |= CEPH_I_FLUSH under the spinlock. Using atomic bitops for all modifications eliminates this class of race entirely. Flags whose only users are now the _BIT form (ERROR_WRITE, ASYNC_CHECK_CAPS) have their old mask defines removed to document that callers must use the _BIT constant with the set_bit/test_bit family. ERROR_FILELOCK and SHUTDOWN retain their mask defines because they are still used via bitmask tests in lockless readers (ceph_inode_is_shutdown, reconnect_caps_cb). The direct assignment in ceph_finish_async_create() is converted from i_ceph_flags = CEPH_I_ASYNC_CREATE to set_bit(). This inode is I_NEW at this point -- still invisible to other threads and guaranteed to have zero flags from alloc_inode -- so either form is safe, but set_bit() keeps the conversion uniform. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 08:05:30 +00:00
ceph: add client reset state machine and session teardown Add the client-side reset state machine, request gating, and manual session teardown implementation. Manual reset is an operator-triggered escape hatch for client/MDS stalemates in which caps, locks, or unsafe metadata state stop making forward progress. The reset blocks new metadata work, attempts a bounded best-effort drain of dirty client state while sessions are still alive, and finally asks the MDS to close sessions before tearing local session state down directly. The reset state machine tracks four phases: IDLE -> QUIESCING -> DRAINING -> TEARDOWN -> IDLE. QUIESCING is set synchronously by schedule_reset() before the workqueue item is dispatched, so that new metadata requests and file-lock acquisitions are gated immediately -- even before the work function begins running. All non-IDLE phases block callers on blocked_wq, preventing races with session teardown. The drain phase flushes mdlog state, dirty caps, and pending cap releases for a bounded interval. State that still cannot make progress within that interval is discarded during teardown, which is the point of the reset: break the stalemate and allow fresh sessions to rebuild clean state. The session teardown follows the established check_new_map() forced-close pattern: unregister sessions under mdsc->mutex, then clean up caps and requests under s->s_mutex. Reconnect is not attempted because the MDS only accepts reconnects during its own RECONNECT phase after restart, not from an active client. Blocked callers are released when reset completes and observe the final result via -EAGAIN (reset failed) or 0 (success). Internal work-function errors such as -ENOMEM are not propagated to unrelated callers like open() or flock(); the detailed error remains in debugfs and tracepoints. The work function checks st->shutdown before each phase transition (DRAINING, TEARDOWN) so that a concurrent ceph_mdsc_destroy() is not overwritten. If destroy already took ownership, the work function releases session references and returns without touching the state. The timeout calculation for blocked-request waiters uses max_t() to prevent jiffies underflow when the deadline has already passed. The close-grace sleep before teardown is a best-effort nudge to let queued REQUEST_CLOSE messages egress; it is not a correctness requirement since the MDS still has session_autoclose as a fallback. The destroy path marks reset as failed and wakes blocked waiters before cancel_work_sync() so unmount does not stall. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 09:11:59 +00:00
ceph: convert inode flags to named bit positions and atomic bitops Define named bit-position constants for all CEPH_I_* inode flags and derive the bitmask values from them. This gives every flag a named _BIT constant usable with the test_bit/set_bit/clear_bit family. The intentionally unused bit position 1 is documented inline. Convert all flag modifications to use atomic bitops (set_bit, clear_bit, test_and_clear_bit). The previous code mixed lockless atomic ops on some flags (ERROR_WRITE, ODIRECT) with non-atomic read-modify-write (|= / &= ~) on other flags sharing the same unsigned long. A concurrent non-atomic RMW can clobber an adjacent lockless atomic update -- for example, a lockless clear_bit(ERROR_WRITE) could be silently resurrected by a concurrent ci->i_ceph_flags |= CEPH_I_FLUSH under the spinlock. Using atomic bitops for all modifications eliminates this class of race entirely. Flags whose only users are now the _BIT form (ERROR_WRITE, ASYNC_CHECK_CAPS) have their old mask defines removed to document that callers must use the _BIT constant with the set_bit/test_bit family. ERROR_FILELOCK and SHUTDOWN retain their mask defines because they are still used via bitmask tests in lockless readers (ceph_inode_is_shutdown, reconnect_caps_cb). The direct assignment in ceph_finish_async_create() is converted from i_ceph_flags = CEPH_I_ASYNC_CREATE to set_bit(). This inode is I_NEW at this point -- still invisible to other threads and guaranteed to have zero flags from alloc_inode -- so either form is safe, but set_bit() keeps the conversion uniform. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 08:05:30 +00:00
ceph: convert inode flags to named bit positions and atomic bitops Define named bit-position constants for all CEPH_I_* inode flags and derive the bitmask values from them. This gives every flag a named _BIT constant usable with the test_bit/set_bit/clear_bit family. The intentionally unused bit position 1 is documented inline. Convert all flag modifications to use atomic bitops (set_bit, clear_bit, test_and_clear_bit). The previous code mixed lockless atomic ops on some flags (ERROR_WRITE, ODIRECT) with non-atomic read-modify-write (|= / &= ~) on other flags sharing the same unsigned long. A concurrent non-atomic RMW can clobber an adjacent lockless atomic update -- for example, a lockless clear_bit(ERROR_WRITE) could be silently resurrected by a concurrent ci->i_ceph_flags |= CEPH_I_FLUSH under the spinlock. Using atomic bitops for all modifications eliminates this class of race entirely. Flags whose only users are now the _BIT form (ERROR_WRITE, ASYNC_CHECK_CAPS) have their old mask defines removed to document that callers must use the _BIT constant with the set_bit/test_bit family. ERROR_FILELOCK and SHUTDOWN retain their mask defines because they are still used via bitmask tests in lockless readers (ceph_inode_is_shutdown, reconnect_caps_cb). The direct assignment in ceph_finish_async_create() is converted from i_ceph_flags = CEPH_I_ASYNC_CREATE to set_bit(). This inode is I_NEW at this point -- still invisible to other threads and guaranteed to have zero flags from alloc_inode -- so either form is safe, but set_bit() keeps the conversion uniform. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 08:05:30 +00:00
ceph: add client reset state machine and session teardown Add the client-side reset state machine, request gating, and manual session teardown implementation. Manual reset is an operator-triggered escape hatch for client/MDS stalemates in which caps, locks, or unsafe metadata state stop making forward progress. The reset blocks new metadata work, attempts a bounded best-effort drain of dirty client state while sessions are still alive, and finally asks the MDS to close sessions before tearing local session state down directly. The reset state machine tracks four phases: IDLE -> QUIESCING -> DRAINING -> TEARDOWN -> IDLE. QUIESCING is set synchronously by schedule_reset() before the workqueue item is dispatched, so that new metadata requests and file-lock acquisitions are gated immediately -- even before the work function begins running. All non-IDLE phases block callers on blocked_wq, preventing races with session teardown. The drain phase flushes mdlog state, dirty caps, and pending cap releases for a bounded interval. State that still cannot make progress within that interval is discarded during teardown, which is the point of the reset: break the stalemate and allow fresh sessions to rebuild clean state. The session teardown follows the established check_new_map() forced-close pattern: unregister sessions under mdsc->mutex, then clean up caps and requests under s->s_mutex. Reconnect is not attempted because the MDS only accepts reconnects during its own RECONNECT phase after restart, not from an active client. Blocked callers are released when reset completes and observe the final result via -EAGAIN (reset failed) or 0 (success). Internal work-function errors such as -ENOMEM are not propagated to unrelated callers like open() or flock(); the detailed error remains in debugfs and tracepoints. The work function checks st->shutdown before each phase transition (DRAINING, TEARDOWN) so that a concurrent ceph_mdsc_destroy() is not overwritten. If destroy already took ownership, the work function releases session references and returns without touching the state. The timeout calculation for blocked-request waiters uses max_t() to prevent jiffies underflow when the deadline has already passed. The close-grace sleep before teardown is a best-effort nudge to let queued REQUEST_CLOSE messages egress; it is not a correctness requirement since the MDS still has session_autoclose as a fallback. The destroy path marks reset as failed and wakes blocked waiters before cancel_work_sync() so unmount does not stall. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 09:11:59 +00:00
ceph: add client reset state machine and session teardown Add the client-side reset state machine, request gating, and manual session teardown implementation. Manual reset is an operator-triggered escape hatch for client/MDS stalemates in which caps, locks, or unsafe metadata state stop making forward progress. The reset blocks new metadata work, attempts a bounded best-effort drain of dirty client state while sessions are still alive, and finally asks the MDS to close sessions before tearing local session state down directly. The reset state machine tracks four phases: IDLE -> QUIESCING -> DRAINING -> TEARDOWN -> IDLE. QUIESCING is set synchronously by schedule_reset() before the workqueue item is dispatched, so that new metadata requests and file-lock acquisitions are gated immediately -- even before the work function begins running. All non-IDLE phases block callers on blocked_wq, preventing races with session teardown. The drain phase flushes mdlog state, dirty caps, and pending cap releases for a bounded interval. State that still cannot make progress within that interval is discarded during teardown, which is the point of the reset: break the stalemate and allow fresh sessions to rebuild clean state. The session teardown follows the established check_new_map() forced-close pattern: unregister sessions under mdsc->mutex, then clean up caps and requests under s->s_mutex. Reconnect is not attempted because the MDS only accepts reconnects during its own RECONNECT phase after restart, not from an active client. Blocked callers are released when reset completes and observe the final result via -EAGAIN (reset failed) or 0 (success). Internal work-function errors such as -ENOMEM are not propagated to unrelated callers like open() or flock(); the detailed error remains in debugfs and tracepoints. The work function checks st->shutdown before each phase transition (DRAINING, TEARDOWN) so that a concurrent ceph_mdsc_destroy() is not overwritten. If destroy already took ownership, the work function releases session references and returns without touching the state. The timeout calculation for blocked-request waiters uses max_t() to prevent jiffies underflow when the deadline has already passed. The close-grace sleep before teardown is a best-effort nudge to let queued REQUEST_CLOSE messages egress; it is not a correctness requirement since the MDS still has session_autoclose as a fallback. The destroy path marks reset as failed and wakes blocked waiters before cancel_work_sync() so unmount does not stall. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 09:11:59 +00:00
ceph: convert inode flags to named bit positions and atomic bitops Define named bit-position constants for all CEPH_I_* inode flags and derive the bitmask values from them. This gives every flag a named _BIT constant usable with the test_bit/set_bit/clear_bit family. The intentionally unused bit position 1 is documented inline. Convert all flag modifications to use atomic bitops (set_bit, clear_bit, test_and_clear_bit). The previous code mixed lockless atomic ops on some flags (ERROR_WRITE, ODIRECT) with non-atomic read-modify-write (|= / &= ~) on other flags sharing the same unsigned long. A concurrent non-atomic RMW can clobber an adjacent lockless atomic update -- for example, a lockless clear_bit(ERROR_WRITE) could be silently resurrected by a concurrent ci->i_ceph_flags |= CEPH_I_FLUSH under the spinlock. Using atomic bitops for all modifications eliminates this class of race entirely. Flags whose only users are now the _BIT form (ERROR_WRITE, ASYNC_CHECK_CAPS) have their old mask defines removed to document that callers must use the _BIT constant with the set_bit/test_bit family. ERROR_FILELOCK and SHUTDOWN retain their mask defines because they are still used via bitmask tests in lockless readers (ceph_inode_is_shutdown, reconnect_caps_cb). The direct assignment in ceph_finish_async_create() is converted from i_ceph_flags = CEPH_I_ASYNC_CREATE to set_bit(). This inode is I_NEW at this point -- still invisible to other threads and guaranteed to have zero flags from alloc_inode -- so either form is safe, but set_bit() keeps the conversion uniform. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 08:05:30 +00:00
ceph: convert inode flags to named bit positions and atomic bitops Define named bit-position constants for all CEPH_I_* inode flags and derive the bitmask values from them. This gives every flag a named _BIT constant usable with the test_bit/set_bit/clear_bit family. The intentionally unused bit position 1 is documented inline. Convert all flag modifications to use atomic bitops (set_bit, clear_bit, test_and_clear_bit). The previous code mixed lockless atomic ops on some flags (ERROR_WRITE, ODIRECT) with non-atomic read-modify-write (|= / &= ~) on other flags sharing the same unsigned long. A concurrent non-atomic RMW can clobber an adjacent lockless atomic update -- for example, a lockless clear_bit(ERROR_WRITE) could be silently resurrected by a concurrent ci->i_ceph_flags |= CEPH_I_FLUSH under the spinlock. Using atomic bitops for all modifications eliminates this class of race entirely. Flags whose only users are now the _BIT form (ERROR_WRITE, ASYNC_CHECK_CAPS) have their old mask defines removed to document that callers must use the _BIT constant with the set_bit/test_bit family. ERROR_FILELOCK and SHUTDOWN retain their mask defines because they are still used via bitmask tests in lockless readers (ceph_inode_is_shutdown, reconnect_caps_cb). The direct assignment in ceph_finish_async_create() is converted from i_ceph_flags = CEPH_I_ASYNC_CREATE to set_bit(). This inode is I_NEW at this point -- still invisible to other threads and guaranteed to have zero flags from alloc_inode -- so either form is safe, but set_bit() keeps the conversion uniform. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 08:05:30 +00:00
ceph: add client reset state machine and session teardown Add the client-side reset state machine, request gating, and manual session teardown implementation. Manual reset is an operator-triggered escape hatch for client/MDS stalemates in which caps, locks, or unsafe metadata state stop making forward progress. The reset blocks new metadata work, attempts a bounded best-effort drain of dirty client state while sessions are still alive, and finally asks the MDS to close sessions before tearing local session state down directly. The reset state machine tracks four phases: IDLE -> QUIESCING -> DRAINING -> TEARDOWN -> IDLE. QUIESCING is set synchronously by schedule_reset() before the workqueue item is dispatched, so that new metadata requests and file-lock acquisitions are gated immediately -- even before the work function begins running. All non-IDLE phases block callers on blocked_wq, preventing races with session teardown. The drain phase flushes mdlog state, dirty caps, and pending cap releases for a bounded interval. State that still cannot make progress within that interval is discarded during teardown, which is the point of the reset: break the stalemate and allow fresh sessions to rebuild clean state. The session teardown follows the established check_new_map() forced-close pattern: unregister sessions under mdsc->mutex, then clean up caps and requests under s->s_mutex. Reconnect is not attempted because the MDS only accepts reconnects during its own RECONNECT phase after restart, not from an active client. Blocked callers are released when reset completes and observe the final result via -EAGAIN (reset failed) or 0 (success). Internal work-function errors such as -ENOMEM are not propagated to unrelated callers like open() or flock(); the detailed error remains in debugfs and tracepoints. The work function checks st->shutdown before each phase transition (DRAINING, TEARDOWN) so that a concurrent ceph_mdsc_destroy() is not overwritten. If destroy already took ownership, the work function releases session references and returns without touching the state. The timeout calculation for blocked-request waiters uses max_t() to prevent jiffies underflow when the deadline has already passed. The close-grace sleep before teardown is a best-effort nudge to let queued REQUEST_CLOSE messages egress; it is not a correctness requirement since the MDS still has session_autoclose as a fallback. The destroy path marks reset as failed and wakes blocked waiters before cancel_work_sync() so unmount does not stall. Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2026-05-07 09:11:59 +00:00
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-15 13:03:35 -05:00
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-15 13:03:35 -05:00
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-15 13:03:35 -05:00
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-15 13:03:35 -05:00
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-15 13:03:35 -05:00
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-15 13:03:35 -05:00
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-15 13:03:35 -05:00
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-15 13:03:35 -05:00