kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/include/net/erspan.h

321 lines
9 KiB
Raw Permalink Normal View History

gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
erspan: Add type I version 0 support. The Type I ERSPAN frame format is based on the barebones IP + GRE(4-byte) encapsulation on top of the raw mirrored frame. Both type I and II use 0x88BE as protocol type. Unlike type II and III, no sequence number or key is required. To creat a type I erspan tunnel device: $ ip link add dev erspan11 type erspan \ local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 0 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:05:06 -07:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
erspan: Add type I version 0 support. The Type I ERSPAN frame format is based on the barebones IP + GRE(4-byte) encapsulation on top of the raw mirrored frame. Both type I and II use 0x88BE as protocol type. Unlike type II and III, no sequence number or key is required. To creat a type I erspan tunnel device: $ ip link add dev erspan11 type erspan \ local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 0 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:05:06 -07:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
net: add missing includes and forward declarations under net/ This patch adds missing includes to headers under include/net. All these problems are currently masked by the existing users including the missing dependency before the broken header. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20 16:57:58 -07:00
net: erspan: create erspan metadata uapi header The patch adds a new uapi header file, erspan.h, and moves the 'struct erspan_metadata' from internal erspan.h to it. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 13:20:10 -08:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
net: erspan: use bitfield instead of mask and offset Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 13:20:09 -08:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
net: Correct spelling in headers Correct spelling in Networking headers. As reported by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822-net-spell-v1-12-3a98971ce2d2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22 13:57:33 +01:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
net: erspan: use bitfield instead of mask and offset Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 13:20:09 -08:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00
net: erspan: use bitfield instead of mask and offset Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 13:20:09 -08:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
erspan: Add type I version 0 support. The Type I ERSPAN frame format is based on the barebones IP + GRE(4-byte) encapsulation on top of the raw mirrored frame. Both type I and II use 0x88BE as protocol type. Unlike type II and III, no sequence number or key is required. To creat a type I erspan tunnel device: $ ip link add dev erspan11 type erspan \ local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 0 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:05:06 -07:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
ip_gre: Refector the erpsan tunnel code. Move two erspan functions to header file, erspan.h, so ipv6 erspan implementation can use it. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 11:51:27 -08:00
net: erspan: use bitfield instead of mask and offset Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 13:20:09 -08:00
ip_gre: Refector the erpsan tunnel code. Move two erspan functions to header file, erspan.h, so ipv6 erspan implementation can use it. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 11:51:27 -08:00
net: erspan: fix use-after-free When building the erspan header for either v1 or v2, the eth_hdr() does not point to the right inner packet's eth_hdr, causing kasan report use-after-free and slab-out-of-bouds read. The patch fixes the following syzkaller issues: [1] BUG: KASAN: slab-out-of-bounds in erspan_xmit+0x22d4/0x2430 net/ipv4/ip_gre.c:735 [2] BUG: KASAN: slab-out-of-bounds in erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698 [3] BUG: KASAN: use-after-free in erspan_xmit+0x22d4/0x2430 net/ipv4/ip_gre.c:735 [4] BUG: KASAN: use-after-free in erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698 [2] CPU: 0 PID: 3654 Comm: syzkaller377964 Not tainted 4.15.0-rc9+ #185 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:440 erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698 erspan_xmit+0x3b8/0x13b0 net/ipv4/ip_gre.c:740 __netdev_start_xmit include/linux/netdevice.h:4042 [inline] netdev_start_xmit include/linux/netdevice.h:4051 [inline] packet_direct_xmit+0x315/0x6b0 net/packet/af_packet.c:266 packet_snd net/packet/af_packet.c:2943 [inline] packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2968 sock_sendmsg_nosec net/socket.c:638 [inline] sock_sendmsg+0xca/0x110 net/socket.c:648 SYSC_sendto+0x361/0x5c0 net/socket.c:1729 SyS_sendto+0x40/0x50 net/socket.c:1697 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x54/0x63 arch/x86/entry/entry_64_compat.S:129 RIP: 0023:0xf7fcfc79 RSP: 002b:00000000ffc6976c EFLAGS: 00000286 ORIG_RAX: 0000000000000171 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000020011000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020008000 RBP: 000000000000001c R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Reported-by: syzbot+9723f2d288e49b492cf0@syzkaller.appspotmail.com Reported-by: syzbot+f0ddeb2b032a8e1d9098@syzkaller.appspotmail.com Reported-by: syzbot+f14b3703cd8d7670203f@syzkaller.appspotmail.com Reported-by: syzbot+eefa384efad8d7997f20@syzkaller.appspotmail.com Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 17:01:29 -08:00
ip_gre: Refector the erpsan tunnel code. Move two erspan functions to header file, erspan.h, so ipv6 erspan implementation can use it. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 11:51:27 -08:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
ip_gre: Refector the erpsan tunnel code. Move two erspan functions to header file, erspan.h, so ipv6 erspan implementation can use it. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 11:51:27 -08:00
net: erspan: fix metadata extraction Commit d350a823020e ("net: erspan: create erspan metadata uapi header") moves the erspan 'version' in front of the 'struct erspan_md2' for later extensibility reason. This breaks the existing erspan metadata extraction code because the erspan_md2 then has a 4-byte offset to between the erspan_metadata and erspan_base_hdr. This patch fixes it. Fixes: 1a66a836da63 ("gre: add collect_md mode to ERSPAN tunnel") Fixes: ef7baf5e083c ("ip6_gre: add ip6 erspan collect_md mode") Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-05 13:35:34 -08:00
ip_gre: Refector the erpsan tunnel code. Move two erspan functions to header file, erspan.h, so ipv6 erspan implementation can use it. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 11:51:27 -08:00
net: Correct spelling in headers Correct spelling in Networking headers. As reported by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822-net-spell-v1-12-3a98971ce2d2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22 13:57:33 +01:00
ip_gre: Refector the erpsan tunnel code. Move two erspan functions to header file, erspan.h, so ipv6 erspan implementation can use it. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 11:51:27 -08:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
ip_gre: Refector the erpsan tunnel code. Move two erspan functions to header file, erspan.h, so ipv6 erspan implementation can use it. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 11:51:27 -08:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
net: erspan: use bitfield instead of mask and offset Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 13:20:09 -08:00
net: erspan: refactor existing erspan code The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:55 -08:00
net: erspan: fix metadata extraction Commit d350a823020e ("net: erspan: create erspan metadata uapi header") moves the erspan 'version' in front of the 'struct erspan_md2' for later extensibility reason. This breaks the existing erspan metadata extraction code because the erspan_md2 then has a 4-byte offset to between the erspan_metadata and erspan_base_hdr. This patch fixes it. Fixes: 1a66a836da63 ("gre: add collect_md mode to ERSPAN tunnel") Fixes: ef7baf5e083c ("ip6_gre: add ip6 erspan collect_md mode") Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-05 13:35:34 -08:00
ip_gre: Refector the erpsan tunnel code. Move two erspan functions to header file, erspan.h, so ipv6 erspan implementation can use it. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 11:51:27 -08:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
erspan: set bso bit based on mirrored packet's len Before the patch, the erspan BSO bit (Bad/Short/Oversized) is not handled. BSO has 4 possible values: 00 --> Good frame with no error, or unknown integrity 11 --> Payload is a Bad Frame with CRC or Alignment Error 01 --> Payload is a Short Frame 10 --> Payload is an Oversized Frame Based the short/oversized definitions in RFC1757, the patch sets the bso bit based on the mirrored packet's size. Reported-by: Xiaoyan Jin <xiaoyanj@vmware.com> Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18 19:41:01 -07:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
net: erspan: use bitfield instead of mask and offset Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 13:20:09 -08:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
net: erspan: fix use-after-free When building the erspan header for either v1 or v2, the eth_hdr() does not point to the right inner packet's eth_hdr, causing kasan report use-after-free and slab-out-of-bouds read. The patch fixes the following syzkaller issues: [1] BUG: KASAN: slab-out-of-bounds in erspan_xmit+0x22d4/0x2430 net/ipv4/ip_gre.c:735 [2] BUG: KASAN: slab-out-of-bounds in erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698 [3] BUG: KASAN: use-after-free in erspan_xmit+0x22d4/0x2430 net/ipv4/ip_gre.c:735 [4] BUG: KASAN: use-after-free in erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698 [2] CPU: 0 PID: 3654 Comm: syzkaller377964 Not tainted 4.15.0-rc9+ #185 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:440 erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698 erspan_xmit+0x3b8/0x13b0 net/ipv4/ip_gre.c:740 __netdev_start_xmit include/linux/netdevice.h:4042 [inline] netdev_start_xmit include/linux/netdevice.h:4051 [inline] packet_direct_xmit+0x315/0x6b0 net/packet/af_packet.c:266 packet_snd net/packet/af_packet.c:2943 [inline] packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2968 sock_sendmsg_nosec net/socket.c:638 [inline] sock_sendmsg+0xca/0x110 net/socket.c:648 SYSC_sendto+0x361/0x5c0 net/socket.c:1729 SyS_sendto+0x40/0x50 net/socket.c:1697 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x54/0x63 arch/x86/entry/entry_64_compat.S:129 RIP: 0023:0xf7fcfc79 RSP: 002b:00000000ffc6976c EFLAGS: 00000286 ORIG_RAX: 0000000000000171 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000020011000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020008000 RBP: 000000000000001c R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Reported-by: syzbot+9723f2d288e49b492cf0@syzkaller.appspotmail.com Reported-by: syzbot+f0ddeb2b032a8e1d9098@syzkaller.appspotmail.com Reported-by: syzbot+f14b3703cd8d7670203f@syzkaller.appspotmail.com Reported-by: syzbot+eefa384efad8d7997f20@syzkaller.appspotmail.com Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 17:01:29 -08:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
net: erspan: fix metadata extraction Commit d350a823020e ("net: erspan: create erspan metadata uapi header") moves the erspan 'version' in front of the 'struct erspan_md2' for later extensibility reason. This breaks the existing erspan metadata extraction code because the erspan_md2 then has a 4-byte offset to between the erspan_metadata and erspan_base_hdr. This patch fixes it. Fixes: 1a66a836da63 ("gre: add collect_md mode to ERSPAN tunnel") Fixes: ef7baf5e083c ("ip6_gre: add ip6 erspan collect_md mode") Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-05 13:35:34 -08:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
erspan: set bso bit based on mirrored packet's len Before the patch, the erspan BSO bit (Bad/Short/Oversized) is not handled. BSO has 4 possible values: 00 --> Good frame with no error, or unknown integrity 11 --> Payload is a Bad Frame with CRC or Alignment Error 01 --> Payload is a Short Frame 10 --> Payload is an Oversized Frame Based the short/oversized definitions in RFC1757, the patch sets the bso bit based on the mirrored packet's size. Reported-by: Xiaoyan Jin <xiaoyanj@vmware.com> Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18 19:41:01 -07:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
net: erspan: use bitfield instead of mask and offset Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 13:20:09 -08:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
net: erspan: fix metadata extraction Commit d350a823020e ("net: erspan: create erspan metadata uapi header") moves the erspan 'version' in front of the 'struct erspan_md2' for later extensibility reason. This breaks the existing erspan metadata extraction code because the erspan_md2 then has a 4-byte offset to between the erspan_metadata and erspan_base_hdr. This patch fixes it. Fixes: 1a66a836da63 ("gre: add collect_md mode to ERSPAN tunnel") Fixes: ef7baf5e083c ("ip6_gre: add ip6 erspan collect_md mode") Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-05 13:35:34 -08:00
net: erspan: introduce erspan v2 for ip_gre The patch adds support for erspan version 2. Not all features are supported in this patch. The SGT (security group tag), GRA (timestamp granularity), FT (frame type) are set to fixed value. Only hardware ID and direction are configurable. Optional subheader is also not supported. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13 16:38:56 -08:00
gre: introduce native tunnel support for ERSPAN The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 09:40:28 -07:00