kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/net/bluetooth/msft.c

1206 lines
30 KiB
Raw Permalink Normal View History

Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Replace zero-length array with flexible-array member There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-31 08:25:42 -05:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Replace zero-length array with flexible-array member There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-31 08:25:42 -05:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: use flexible-array member instead of zero-length array Fix the following coccicheck warning: net/bluetooth/msft.c:37:6-13: WARNING use flexible-array member instead net/bluetooth/msft.c:42:6-10: WARNING use flexible-array member instead net/bluetooth/msft.c:52:6-10: WARNING use flexible-array member instead Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-04-10 10:19:35 +08:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: use flexible-array member instead of zero-length array Fix the following coccicheck warning: net/bluetooth/msft.c:37:6-13: WARNING use flexible-array member instead net/bluetooth/msft.c:42:6-10: WARNING use flexible-array member instead net/bluetooth/msft.c:52:6-10: WARNING use flexible-array member instead Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-04-10 10:19:35 +08:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: use flexible-array member instead of zero-length array Fix the following coccicheck warning: net/bluetooth/msft.c:37:6-13: WARNING use flexible-array member instead net/bluetooth/msft.c:42:6-10: WARNING use flexible-array member instead net/bluetooth/msft.c:52:6-10: WARNING use flexible-array member instead Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-04-10 10:19:35 +08:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: advmon offload MSFT remove monitor Implements the monitor removal functionality for advertising monitor offloading to MSFT controllers. Supply handle = 0 to remove all monitors. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:13 +08:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL The __hci_cmd_sync() function doesn't return NULL. Checking for NULL doesn't make the code safer, it just confuses people. When a function returns both error pointers and NULL then generally the NULL is a kind of success case. For example, maybe we look up an item then errors mean we ran out of memory but NULL means the item is not found. Or if we request a feature, then error pointers mean that there was an error but NULL means that the feature has been deliberately turned off. In this code it's different. The NULL is handled as if there is a bug in __hci_cmd_sync() where it accidentally returns NULL instead of a proper error code. This was done consistently until commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") which deleted the work around for the potential future bug and treated NULL as success. Predicting potential future bugs is complicated, but we should just fix them instead of working around them. Instead of debating whether NULL is failure or success, let's just say it's currently impossible and delete the dead code. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-05 14:19:23 +03:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_features() only checks that the response covers the fixed part of struct msft_rp_read_supported_features, which is 11 bytes: if (skb->len < sizeof(*rp)) { bt_dev_err(hdev, "MSFT supported features length mismatch"); goto failed; } evt_prefix[] is a flexible array member and rp->evt_prefix_len is an unvalidated u8 taken straight out of that response, so msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len, GFP_KERNEL); copies up to 255 bytes from a reply that may have carried none of them. What is copied is data the controller never sent, and it is then used to match incoming vendor events in msft_vendor_evt(). This is not an out-of-bounds access. An skb data allocation always has at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the payload, which is more than the 255 byte maximum, so the read stays inside the allocation and KASAN does not report it. It is still a read of bytes the host was never given, with the length fully controlled by the controller. Reject a response that is too short for the prefix it declares. Verified with an emulated controller over /dev/vhci on a KASAN kernel, with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk and btrtl do unconditionally. A reply of exactly 11 bytes declaring evt_prefix_len = 255 reaches kmemdup and copies 255 bytes ("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since the reply ends at the fixed part, all 255 come from past the end of the response. No KASAN report is produced, as expected from the allocation slack described above. With this patch the response is rejected with "MSFT event prefix length mismatch" and msft->evt_prefix is left unset. Fixes: 145373cb1b1f ("Bluetooth: Add framework for Microsoft vendor extension") Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2026-08-07 01:25:54 +00:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Allow Microsoft extension to indicate curve validation Some controllers don't support the Simple Pairing Options feature that can indicate the support for P-192 and P-256 public key validation. However they might support the Microsoft vendor extension that can indicate the validiation capability as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-04-06 21:55:56 +02:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: mgmt: Add MGMT Adv Monitor Device Found/Lost events This patch introduces two new MGMT events for notifying the bluetoothd whenever the controller starts/stops monitoring a device. Test performed: - Verified by logs that the MSFT Monitor Device is received from the controller and the bluetoothd is notified whenever the controller starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:26 -08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: mgmt: Add MGMT Adv Monitor Device Found/Lost events This patch introduces two new MGMT events for notifying the bluetoothd whenever the controller starts/stops monitoring a device. Test performed: - Verified by logs that the MSFT Monitor Device is received from the controller and the bluetoothd is notified whenever the controller starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:26 -08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 Fixes: a2a4dedf88ab ("Bluetooth: advmon offload MSFT add monitor") Assisted-by: Codex:gpt-5.5 Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2026-06-24 00:13:28 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL The __hci_cmd_sync() function doesn't return NULL. Checking for NULL doesn't make the code safer, it just confuses people. When a function returns both error pointers and NULL then generally the NULL is a kind of success case. For example, maybe we look up an item then errors mean we ran out of memory but NULL means the item is not found. Or if we request a feature, then error pointers mean that there was an error but NULL means that the feature has been deliberately turned off. In this code it's different. The NULL is handled as if there is a bug in __hci_cmd_sync() where it accidentally returns NULL instead of a proper error code. This was done consistently until commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") which deleted the work around for the potential future bug and treated NULL as success. Predicting potential future bugs is complicated, but we should just fix them instead of working around them. Instead of debating whether NULL is failure or success, let's just say it's currently impossible and delete the dead code. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-05 14:19:23 +03:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: Clear tracked devices on resume Clear already tracked devices on system resume. Once the monitors are reregistered after resume, matched devices in range will be found again. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-12 02:08:58 -08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL The __hci_cmd_sync() function doesn't return NULL. Checking for NULL doesn't make the code safer, it just confuses people. When a function returns both error pointers and NULL then generally the NULL is a kind of success case. For example, maybe we look up an item then errors mean we ran out of memory but NULL means the item is not found. Or if we request a feature, then error pointers mean that there was an error but NULL means that the feature has been deliberately turned off. In this code it's different. The NULL is handled as if there is a bug in __hci_cmd_sync() where it accidentally returns NULL instead of a proper error code. This was done consistently until commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") which deleted the work around for the potential future bug and treated NULL as success. Predicting potential future bugs is complicated, but we should just fix them instead of working around them. Instead of debating whether NULL is failure or success, let's just say it's currently impossible and delete the dead code. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-05 14:19:23 +03:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL The __hci_cmd_sync() function doesn't return NULL. Checking for NULL doesn't make the code safer, it just confuses people. When a function returns both error pointers and NULL then generally the NULL is a kind of success case. For example, maybe we look up an item then errors mean we ran out of memory but NULL means the item is not found. Or if we request a feature, then error pointers mean that there was an error but NULL means that the feature has been deliberately turned off. In this code it's different. The NULL is handled as if there is a bug in __hci_cmd_sync() where it accidentally returns NULL instead of a proper error code. This was done consistently until commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") which deleted the work around for the potential future bug and treated NULL as success. Predicting potential future bugs is complicated, but we should just fix them instead of working around them. Instead of debating whether NULL is failure or success, let's just say it's currently impossible and delete the dead code. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-05 14:19:23 +03:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: Fix null pointer deref on unexpected status event __hci_cmd_sync returns NULL if the controller responds with a status event. This is unexpected for the commands sent here, but on occurrence leads to null pointer dereferences and thus must be handled. Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22 13:53:07 +02:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: msft: Clear tracked devices on resume Clear already tracked devices on system resume. Once the monitors are reregistered after resume, matched devices in range will be found again. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-12 02:08:58 -08:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: advmon offload MSFT handle controller reset When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:14 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: advmon offload MSFT handle controller reset When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:14 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: advmon offload MSFT handle controller reset When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:14 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: advmon offload MSFT handle controller reset When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:14 +08:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: mgmt: Add MGMT Adv Monitor Device Found/Lost events This patch introduces two new MGMT events for notifying the bluetoothd whenever the controller starts/stops monitoring a device. Test performed: - Verified by logs that the MSFT Monitor Device is received from the controller and the bluetoothd is notified whenever the controller starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:26 -08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL The __hci_cmd_sync() function doesn't return NULL. Checking for NULL doesn't make the code safer, it just confuses people. When a function returns both error pointers and NULL then generally the NULL is a kind of success case. For example, maybe we look up an item then errors mean we ran out of memory but NULL means the item is not found. Or if we request a feature, then error pointers mean that there was an error but NULL means that the feature has been deliberately turned off. In this code it's different. The NULL is handled as if there is a bug in __hci_cmd_sync() where it accidentally returns NULL instead of a proper error code. This was done consistently until commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") which deleted the work around for the potential future bug and treated NULL as success. Predicting potential future bugs is complicated, but we should just fix them instead of working around them. Instead of debating whether NULL is failure or success, let's just say it's currently impossible and delete the dead code. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-05 14:19:23 +03:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL The __hci_cmd_sync() function doesn't return NULL. Checking for NULL doesn't make the code safer, it just confuses people. When a function returns both error pointers and NULL then generally the NULL is a kind of success case. For example, maybe we look up an item then errors mean we ran out of memory but NULL means the item is not found. Or if we request a feature, then error pointers mean that there was an error but NULL means that the feature has been deliberately turned off. In this code it's different. The NULL is handled as if there is a bug in __hci_cmd_sync() where it accidentally returns NULL instead of a proper error code. This was done consistently until commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") which deleted the work around for the potential future bug and treated NULL as success. Predicting potential future bugs is complicated, but we should just fix them instead of working around them. Instead of debating whether NULL is failure or success, let's just say it's currently impossible and delete the dead code. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-05 14:19:23 +03:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: hci_core: Fix race condition during device registration In hci_register_dev(), the power_on work item is queued to hdev->req_workqueue before initializing hdev->adv_monitors_idr and registering the MSFT extension via msft_register(). For devices marked with quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on the device. When the power_on work item runs concurrently on another CPU, hci_power_on() detects that the device is unconfigured and immediately invokes hci_dev_do_close(), which calls msft_do_close(). Concurrently, msft_register() allocates the msft structure and exposes it to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If msft_do_close() executes while hdev->msft_data is already assigned but the mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates on an uninitialized mutex, triggering a DEBUG_LOCKS warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common kernel/locking/mutex.c:625 [inline] WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550 kernel/locking/mutex.c:821 ... Call Trace: <TASK> msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693 hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522 hci_dev_do_close net/bluetooth/hci_core.c:499 [inline] hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0x92d/0xe10 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Fix this by moving the queue_work() call in hci_register_dev() to after idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device structures and extensions are fully initialized before asynchronous tasks can access them. Additionally, assign hdev->msft_data in msft_register() only after mutex_init(&msft->filter_lock) has completed. Fixes: 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") Assisted-by: Gemini:gemini-3.7-flash Gemini:gemini-3.1-pro-preview syzbot Reported-by: syzbot+14ce1b05b7d5a989abbe@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=14ce1b05b7d5a989abbe Link: https://syzkaller.appspot.com/ai_job?id=2bc9e8aa-ca6d-43e2-be2c-fd5d9f649d7e Signed-off-by: Aleksandr Nogikh <nogikh@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2026-08-28 08:55:09 +00:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: msft: fix slab-use-after-free in msft_do_close() Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309 Fixes: bf6a4e30ffbd ("Bluetooth: disable advertisement filters during suspend") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-04-30 12:20:51 -04:00
Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-09 14:10:23 -07:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: mgmt: Add MGMT Adv Monitor Device Found/Lost events This patch introduces two new MGMT events for notifying the bluetoothd whenever the controller starts/stops monitoring a device. Test performed: - Verified by logs that the MSFT Monitor Device is received from the controller and the bluetoothd is notified whenever the controller starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:26 -08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: mgmt: Add MGMT Adv Monitor Device Found/Lost events This patch introduces two new MGMT events for notifying the bluetoothd whenever the controller starts/stops monitoring a device. Test performed: - Verified by logs that the MSFT Monitor Device is received from the controller and the bluetoothd is notified whenever the controller starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:26 -08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Fix memory leak Fix leaking buffer allocated to send MSFT_OP_LE_MONITOR_ADVERTISEMENT. Fixes: 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-02-28 10:56:49 -05:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Fix memory leak Fix leaking buffer allocated to send MSFT_OP_LE_MONITOR_ADVERTISEMENT. Fixes: 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-02-28 10:56:49 -05:00
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL The __hci_cmd_sync() function doesn't return NULL. Checking for NULL doesn't make the code safer, it just confuses people. When a function returns both error pointers and NULL then generally the NULL is a kind of success case. For example, maybe we look up an item then errors mean we ran out of memory but NULL means the item is not found. Or if we request a feature, then error pointers mean that there was an error but NULL means that the feature has been deliberately turned off. In this code it's different. The NULL is handled as if there is a bug in __hci_cmd_sync() where it accidentally returns NULL instead of a proper error code. This was done consistently until commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") which deleted the work around for the potential future bug and treated NULL as success. Predicting potential future bugs is complicated, but we should just fix them instead of working around them. Instead of debating whether NULL is failure or success, let's just say it's currently impossible and delete the dead code. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-05 14:19:23 +03:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap The 'quirks' member already ran out of bits on some platforms some time ago. Replace the integer member by a bitmap in order to have enough bits in future. Replace raw bit operations by accessor macros. Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING") Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE") Suggested-by: Pauli Virtanen <pav@iki.fi> Tested-by: Ivan Pravdin <ipravdin.official@gmail.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-14 22:27:45 +02:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: hci_event: Use of a function table to handle HCI events This change the use of switch statement to a function table which is easier to extend and can include min/max length of each HCI event. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-01 10:55:03 -08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: msft: Extended monitor tracking by address filter Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-21 18:00:31 +08:00
Bluetooth: msft: Handle MSFT Monitor Device Event Whenever the controller starts/stops monitoring a bt device, it sends MSFT Monitor Device event. Add handler to read this vendor event. Test performed: - Verified by logs that the MSFT Monitor Device event is received from the controller whenever it starts/stops monitoring a device. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-11 08:14:25 -08:00
Bluetooth: Add framework for Microsoft vendor extension Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03 21:44:01 +02:00
Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURES This adds the request handler of MGMT_OP_READ_ADV_MONITOR_FEATURES command. Since the controller-based monitoring is not yet in place, this report only the supported features but not the enabled features. The following test was performed. - Issuing btmgmt advmon-features. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-17 16:39:13 +02:00
Bluetooth: advmon offload MSFT add monitor Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:12 +08:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: Convert MSFT filter HCI cmd to hci_sync The msft_set_filter_enable() command was using the deprecated hci_request mechanism rather than hci_sync. This caused the warning error: hci0: HCI_REQ-0xfcf0 Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-24 09:56:32 -08:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: Convert MSFT filter HCI cmd to hci_sync The msft_set_filter_enable() command was using the deprecated hci_request mechanism rather than hci_sync. This caused the warning error: hci0: HCI_REQ-0xfcf0 Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-24 09:56:32 -08:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: advmon offload MSFT handle controller reset When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:14 +08:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: advmon offload MSFT handle controller reset When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:14 +08:00
Bluetooth: hci_sync: Refactor add Adv Monitor Make use of hci_cmd_sync_queue for adding an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:13 -07:00
Bluetooth: advmon offload MSFT handle controller reset When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:14 +08:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Rework hci_suspend_notifier This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 16:59:00 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: hci_sync: Refactor remove Adv Monitor Make use of hci_cmd_sync_queue for removing an advertisement monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-20 16:21:14 -07:00
Bluetooth: Fix Advertisement Monitor Suspend/Resume During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21 14:47:10 -07:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: Convert MSFT filter HCI cmd to hci_sync The msft_set_filter_enable() command was using the deprecated hci_request mechanism rather than hci_sync. This caused the warning error: hci0: HCI_REQ-0xfcf0 Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-24 09:56:32 -08:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: Convert MSFT filter HCI cmd to hci_sync The msft_set_filter_enable() command was using the deprecated hci_request mechanism rather than hci_sync. This caused the warning error: hci0: HCI_REQ-0xfcf0 Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-24 09:56:32 -08:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: Convert MSFT filter HCI cmd to hci_sync The msft_set_filter_enable() command was using the deprecated hci_request mechanism rather than hci_sync. This caused the warning error: hci0: HCI_REQ-0xfcf0 Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-24 09:56:32 -08:00
Bluetooth: advmon offload MSFT handle filter enablement Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-22 16:36:15 +08:00
Bluetooth: Allow Microsoft extension to indicate curve validation Some controllers don't support the Simple Pairing Options feature that can indicate the support for P-192 and P-256 public key validation. However they might support the Microsoft vendor extension that can indicate the validiation capability as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-04-06 21:55:56 +02:00