kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/net/rfkill/rfkill-gpio.c

220 lines
5.2 KiB
Raw Permalink Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 15:51:31 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: Do not load on Lenovo Yoga Tab 3 Pro YT3-X90 The Lenovo Yoga Tab 3 Pro YT3-X90 has a non functional "BCM4752" ACPI device, which uses GPIO resources which are actually necessary / used for the sound (codec, speaker amplifier) on the Lenovo Yoga Tab 3 Pro. If the rfkill-gpio driver loads before the sound drivers do the sound drivers fail to load because the GPIOs are already claimed. Add a DMI based deny list with the Lenovo Yoga Tab 3 Pro on there and make rfkill_gpio_probe() exit with -ENODEV for devices on the DMI based deny list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20240825131916.6388-1-hdegoede@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-25 15:19:16 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill-gpio: Add explicit include for of.h With linux/acpi.h no longer implicitly including of.h, add an explicit include of of.h to fix the following error: net/rfkill/rfkill-gpio.c:181:21: error: implicit declaration of function 'of_match_ptr' is invalid in C99 [-Werror,-Wimplicit-function-declaration] Acked-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-05 15:27:17 -05:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: add ACPI support Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:43 +03:00
net: rfkill: gpio: convert to descriptor-based GPIO interface Convert to the safer gpiod_* family of API functions. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 12:05:46 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: prepare for DT and ACPI support This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:42 +03:00
net: rfkill: gpio: convert to descriptor-based GPIO interface Convert to the safer gpiod_* family of API functions. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 12:05:46 +02:00
net: rfkill: gpio: prepare for DT and ACPI support This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:42 +03:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: Add check for clk_enable() Add check for the return value of clk_enable() to catch the potential error. Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver") Signed-off-by: Mingwei Zheng <zmw12306@gmail.com> Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Link: https://patch.msgid.link/20241108195341.1853080-1-zmw12306@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-08 14:53:41 -05:00
rfkill-gpio: Use gpio cansleep version If gpio controller requires waiting for read and write GPIO values, then we have to use the gpio cansleep api. Fix the rfkill_gpio_set_power which calls only the nonsleep version (causing kernel warning). There is no problem to use the cansleep version here because we are not in IRQ handler or similar context (cf rfkill_set_block). Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-07 11:38:11 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: Fix clock status Clock is disabled when the device is blocked. So, clock_enabled is the logical negation of "blocked". Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16 14:53:58 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: Add default GPIO driver mappings for ACPI The driver uses devm_gpiod_get_index(..., index) so that the index refers directly to the GpioIo resource under the ACPI device. The problem with this is that if the ordering changes we get wrong GPIOs. With ACPI 5.1 _DSD we can now use names instead to reference GPIOs analogous to Device Tree. However, we still have systems out there that do not provide _DSD at all. These systems must be supported as well. Luckily we now have acpi_dev_add_driver_gpios() that can be used to provide mappings for systems where _DSD is not provided and still take advantage of _DSD if it exists. This patch changes the driver to create default GPIO mappings if we are running on ACPI system. While there we can drop the indices completely and use devm_gpiod_get() with name instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-27 12:15:14 +02:00
net: rfkill: gpio: add ACPI support Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:43 +03:00
net: rfkill: gpio: Switch to devm_acpi_dev_add_driver_gpios() Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify error path and fix potentially wrong assingment if ->probe() fails. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-10 22:10:34 +03:00
net: rfkill: gpio: add ACPI support Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:43 +03:00
net: rfkill: gpio: Do not load on Lenovo Yoga Tab 3 Pro YT3-X90 The Lenovo Yoga Tab 3 Pro YT3-X90 has a non functional "BCM4752" ACPI device, which uses GPIO resources which are actually necessary / used for the sound (codec, speaker amplifier) on the Lenovo Yoga Tab 3 Pro. If the rfkill-gpio driver loads before the sound drivers do the sound drivers fail to load because the GPIOs are already claimed. Add a DMI based deny list with the Lenovo Yoga Tab 3 Pro on there and make rfkill_gpio_probe() exit with -ENODEV for devices on the DMI based deny list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20240825131916.6388-1-hdegoede@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-25 15:19:16 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: prepare for DT and ACPI support This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:42 +03:00
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to a potential crash. rfkill_find_type() does accept a NULL pointer, fix the potential crash by initializing type_name to NULL. Note likely sofar this has not been caught because: 1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device 2. The stack happened to contain NULL where type_name is stored Fixes: 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-13 13:35:15 +02:00
net: rfkill: gpio: add DT support Allow probing rfkill-gpio via device tree. This hooks up the already existing support that was started in commit 262c91ee5e52 ("net: rfkill: gpio: prepare for DT and ACPI support") via the "rfkill-gpio" compatible, with the "name" and "type" properties renamed to "label" and "radio-type", respectively, in the device tree case. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20230102-rfkill-gpio-dt-v2-2-d1b83758c16d@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-02 18:29:34 +01:00
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to a potential crash. rfkill_find_type() does accept a NULL pointer, fix the potential crash by initializing type_name to NULL. Note likely sofar this has not been caught because: 1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device 2. The stack happened to contain NULL where type_name is stored Fixes: 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-13 13:35:15 +02:00
net: rfkill: gpio: convert to descriptor-based GPIO interface Convert to the safer gpiod_* family of API functions. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 12:05:46 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: Do not load on Lenovo Yoga Tab 3 Pro YT3-X90 The Lenovo Yoga Tab 3 Pro YT3-X90 has a non functional "BCM4752" ACPI device, which uses GPIO resources which are actually necessary / used for the sound (codec, speaker amplifier) on the Lenovo Yoga Tab 3 Pro. If the rfkill-gpio driver loads before the sound drivers do the sound drivers fail to load because the GPIOs are already claimed. Add a DMI based deny list with the Lenovo Yoga Tab 3 Pro on there and make rfkill_gpio_probe() exit with -ENODEV for devices on the DMI based deny list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20240825131916.6388-1-hdegoede@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-25 15:19:16 +02:00
net: rfkill: gpio: convert to resource managed allocation And remove now unneeded resource freeing. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:39 +03:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: add DT support Allow probing rfkill-gpio via device tree. This hooks up the already existing support that was started in commit 262c91ee5e52 ("net: rfkill: gpio: prepare for DT and ACPI support") via the "rfkill-gpio" compatible, with the "name" and "type" properties renamed to "label" and "radio-type", respectively, in the device tree case. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20230102-rfkill-gpio-dt-v2-2-d1b83758c16d@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-02 18:29:34 +01:00
net: rfkill: gpio: get the name and type from device property This prepares the driver for removal of platform data. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-25 12:03:47 +03:00
net: rfkill: gpio: add ACPI support Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:43 +03:00
net: rfkill: gpio: prepare for DT and ACPI support This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:42 +03:00
net: rfkill: gpio: remove unused and obsolete platform parameters After upgrading to descriptor based gpios, the gpio numbers are not used anymore. The power_clk_name and the platform specific setup and close hooks are not used by anybody, and we should not encourage use of such things, so removing them. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-01 17:02:53 +03:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: prevent value glitch during probe When either reset- or shutdown-gpio have are initially deasserted, e.g. after a reboot - or when the hardware does not include pull-down, there will be a short toggle of both IOs to logical 0 and back to 1. It seems that the rfkill default is unblocked, so the driver should not glitch to output low during probe. It can lead e.g. to unexpected lte modem reconnect: [1] root@localhost:~# dmesg | grep "usb 2-1" [ 2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 21.215278] usb 2-1: USB disconnect, device number 2 [ 28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd The glitch has been discovered on an arm64 board, now that device-tree support for the rfkill-gpio driver has finally appeared :). Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to GPIOD_ASIS to avoid any glitches. The rfkill driver will set the intended value during rfkill_sync_work. Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver") Signed-off-by: Josua Mayer <josua@solid-run.com> Link: https://lore.kernel.org/r/20231004163928.14609-1-josua@solid-run.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-04 18:39:28 +02:00
net: rfkill: gpio: make better use of gpiod API Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Furthermore there is devm_gpiod_get_optional which is designed to get optional gpios. Simplify driver accordingly. Note this makes error checking more strict because only -ENOENT is ignored when searching for the GPIOs which is good. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-28 11:46:12 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: make better use of gpiod API Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Furthermore there is devm_gpiod_get_optional which is designed to get optional gpios. Simplify driver accordingly. Note this makes error checking more strict because only -ENOENT is ignored when searching for the GPIOs which is good. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-28 11:46:12 +02:00
net: rfkill: gpio: prevent value glitch during probe When either reset- or shutdown-gpio have are initially deasserted, e.g. after a reboot - or when the hardware does not include pull-down, there will be a short toggle of both IOs to logical 0 and back to 1. It seems that the rfkill default is unblocked, so the driver should not glitch to output low during probe. It can lead e.g. to unexpected lte modem reconnect: [1] root@localhost:~# dmesg | grep "usb 2-1" [ 2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 21.215278] usb 2-1: USB disconnect, device number 2 [ 28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd The glitch has been discovered on an arm64 board, now that device-tree support for the rfkill-gpio driver has finally appeared :). Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to GPIOD_ASIS to avoid any glitches. The rfkill driver will set the intended value during rfkill_sync_work. Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver") Signed-off-by: Josua Mayer <josua@solid-run.com> Link: https://lore.kernel.org/r/20231004163928.14609-1-josua@solid-run.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-04 18:39:28 +02:00
net: rfkill: gpio: make better use of gpiod API Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Furthermore there is devm_gpiod_get_optional which is designed to get optional gpios. Simplify driver accordingly. Note this makes error checking more strict because only -ENOENT is ignored when searching for the GPIOs which is good. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-28 11:46:12 +02:00
net: rfkill: gpio: convert to descriptor-based GPIO interface Convert to the safer gpiod_* family of API functions. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 12:05:46 +02:00
net: rfkill: gpio: get the name and type from device property This prepares the driver for removal of platform data. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-25 12:03:47 +03:00
net: rfkill: gpio: convert to descriptor-based GPIO interface Convert to the safer gpiod_* family of API functions. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 12:05:46 +02:00
net: rfkill: gpio: set GPIO direction Fix the undefined usage of the GPIO consumer API after retrieving the GPIO description with GPIO_ASIS. The API documentation mentions that GPIO_ASIS won't set a GPIO direction and requires the user to set a direction before using the GPIO. This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer able to enabled/disable a device, presumably because the GPIO controller was never configured for the output direction. Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe") Cc: stable@vger.kernel.org Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-07 08:58:36 +01:00
net: rfkill: gpio: prepare for DT and ACPI support This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:42 +03:00
net: rfkill: gpio: convert to resource managed allocation And remove now unneeded resource freeing. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:39 +03:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: allow booting in blocked state By default, rfkill state is unblocked and this behavior is not configurable. Add support for booting in blocked state based on the presence of a devicetree property. Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com> Link: https://patch.msgid.link/20250116084702.3473176-2-catalin.popescu@leica-geosystems.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-16 09:47:02 +01:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
rfkill: gpio: fix memory leak in probe error path Make sure to free the rfkill device in case registration fails during probe. Fixes: 5e7ca3937fbe ("net: rfkill: gpio: convert to resource managed allocation") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-04-26 09:31:52 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: prepare for DT and ACPI support This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:42 +03:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
rfkill: gpio: fix memory leak in probe error path Make sure to free the rfkill device in case registration fails during probe. Fixes: 5e7ca3937fbe ("net: rfkill: gpio: convert to resource managed allocation") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-04-26 09:31:52 +02:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: Convert to platform remove callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/20240306183538.88777-2-u.kleine-koenig@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-06 19:35:38 +01:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: add ACPI IDs for a Broadcom bluetooth chip This adds ACPI IDs for Broadcom bluetooth chip BCM43241 used on various Baytrail based boards such as Lenovo Miix 2 and Asus Transformer Book T100TA. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-01 17:02:55 +03:00
net: rfkill: gpio: add ACPI support Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:43 +03:00
net: rfkill: gpio: add ACPI ID for GPS module on Lenovo Miix2 On Lenovo Miix 2 8", BCM4752 is renamed LNV4752. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-01 17:02:54 +03:00
net: rfkill: gpio: add ACPI support Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:43 +03:00
net: rfkill: gpio: Enable module auto-loading for ACPI based switches For the ACPI based switches the MODULE_DEVICE_TABLE is missing to export the entries for module auto-loading. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-12 21:49:28 +02:00
net: rfkill: gpio: add ACPI IDs for a Broadcom bluetooth chip This adds ACPI IDs for Broadcom bluetooth chip BCM43241 used on various Baytrail based boards such as Lenovo Miix 2 and Asus Transformer Book T100TA. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-01 17:02:55 +03:00
net: rfkill: gpio: add ACPI support Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:43 +03:00
net: rfkill: gpio: add DT support Allow probing rfkill-gpio via device tree. This hooks up the already existing support that was started in commit 262c91ee5e52 ("net: rfkill: gpio: prepare for DT and ACPI support") via the "rfkill-gpio" compatible, with the "name" and "type" properties renamed to "label" and "radio-type", respectively, in the device tree case. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20230102-rfkill-gpio-dt-v2-2-d1b83758c16d@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-02 18:29:34 +01:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
Get rid of 'remove_new' relic from platform driver struct The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-01 15:12:43 -08:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: gpio: prepare for DT and ACPI support This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:42 +03:00
net: rfkill: gpio: add ACPI support Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16 13:53:43 +03:00
net: rfkill: gpio: add DT support Allow probing rfkill-gpio via device tree. This hooks up the already existing support that was started in commit 262c91ee5e52 ("net: rfkill: gpio: prepare for DT and ACPI support") via the "rfkill-gpio" compatible, with the "name" and "type" properties renamed to "label" and "radio-type", respectively, in the device tree case. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20230102-rfkill-gpio-dt-v2-2-d1b83758c16d@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-02 18:29:34 +01:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00
net: rfkill: convert net/rfkill/* to use module_platform_driver() This patch converts the drivers in net/rfkill/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: "David S. Miller" <davem@davemloft.net> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Antonio Ospite <ospite@studenti.unina.it> Cc: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28 17:15:04 +08:00
net: rfkill: add generic gpio rfkill driver This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:41:48 -07:00