rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-17 12:55:22 -03:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
2026-08-05 23:28:35 +02:00
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
|
|
|
|
|
2025-07-17 12:55:23 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-05 23:28:35 +02:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
rust: io: add copying methods
One feature that was lost from the old `dma_read!` and `dma_write!` when
moving to `io_read!` and `io_write!` was the ability to read/write a large
structs. However, the semantics was unclear to begin with, as there was no
guarantee about their atomicity even for structs that were small enough to
fit in u32. Re-introduce the capability in the form of copying methods.
dma_read!(foo, bar) -> io_project!(foo, bar).copy_read()
dma_write!(foo, bar, baz) -> io_project!(foo, bar).copy_write(baz)
Model these semantics after memcpy so user has clear expectation of lack of
atomicity. As an additional benefit of this change, this now works for MMIO
as well by mapping them to `memcpy_{from,to}io`.
For slices which is DST so the `copy_read` and `copy_write` API above can't
work, add `copy_from_slice` and `copy_to_slice` to copy from/to normal
memory.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260706-io_projection-v6-19-72cd5d055d54@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2026-07-06 13:44:32 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
rust: add `io::{Io, IoRaw}` base types
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19 18:04:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-17 12:55:22 -03:00
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
2025-07-17 12:55:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-17 12:55:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
|
|
|
|
|
2025-07-17 12:55:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-17 12:55:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-17 12:55:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-02 19:37:43 +00:00
|
|
|
|
|
|
|
|
|
2025-07-17 12:55:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
