arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches

Browse source

There are different switches available on both the RZ/G3S SMARC Module and
RZ SMARC Carrier II boards. These switches are used to route different SoC
signals to different parts available on board.

These switches are described in device trees through macros. These macros
are set accordingly such that the resulted compiled dtb to describe the
on-board switches states.

The SCIF1 depends on the state of the SW_CONFIG3 and SW_OPT_MUX4 switches.
SCIF1 can be enabled through a device tree overlay. To manage all switches
in a unified state and allow users to configure the output device tree, add
a file that contains all switch definitions and states.

Commit prepares the code to enable SCIF1 on the RZ/G3S overlay.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250120130936.1080069-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

...

This commit is contained in:

Claudiu Beznea 2025-01-20 15:09:34 +02:00 • committed by Geert Uytterhoeven

parent 2f9f69188e

commit 02760e35b5

2 changed files with 33 additions and 19 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

20

arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi

View file

32

arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h

View file