net: phy: air_en8811h: move LED GPIO configuration to config_init

Browse source

The LED GPIO pins (GPIO3/4/5, mapped to LED2/LED1/LED0) are only ever
configured as outputs once, in .probe(). But .config_init() restarts
the MD32 MCU via en8811h_restart_mcu() on every call after the first
(priv->mcu_needs_restart), and that restart resets buckpbus-mapped MCU
state, including EN8811H_GPIO_OUTPUT. As a result the LED GPIOs fall
back to inputs after the first event that re-triggers .config_init()
(link renegotiation, ifdown/ifup, resume), and the PHY's LEDs stop
reflecting link/activity state even though they worked right after
probe.

Move the GPIO-as-output configuration from .probe() to the end of
.config_init(), so it is reapplied every time the MCU may have been
restarted.

Fixes: 71e7943011 ("net: phy: air_en8811h: Add the Airoha EN8811H PHY driver")
Suggested-by: Mikhail Zhilkin <csharper2005@gmail.com>
Signed-off-by: Vitaliy Sochnev <sochnev.v.74@gmail.com>
Link: https://patch.msgid.link/20260823130638.1166453-2-sochnev.v.74@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

...

This commit is contained in:

Vitaliy Sochnev 2026-08-23 14:06:36 +01:00 • committed by Paolo Abeni

parent 00eeab0c64

commit 03b4702fc5

1 changed files with 11 additions and 7 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

18

drivers/net/phy/air_en8811h.c

View file