ARM: dts: renesas: armadillo800eva: Enable SDHI1

Browse source

The Armadillo-800EVA board provides an SD card slot and an AWL13 SDIO
interface connected to the SDHI1 controller.  Routing between these two
interfaces is controlled by a mechanical DIP switch and a set of
multiplexers.

To support this, add:
  - A fixed 3.3V regulator for SDHI1 power, controlled by PORT16 (G2),
  - SDHI1 pinmux groups for data, control, and card detection,
  - A gpio-hog for PORT6 (J5) to control the SDHI1/AWLAN multiplexer.

PORT176 (N21) is already configured as output-high in this DTS (via
lcd0-mux-hog), routing the SDSLOT2_ENABLE signal to PORT6.  Since the
hardware includes an external 10k pull-up resistor (R94) on this line,
PORT6 is configured as an input to allow the physical DIP switch to
determine the routing without SoC interference.

Both configurations have been verified:
  - SD card (CON8): detected as mmcblk1, high-speed SDHC,
  - SDIO (CON14): detected as mmc1, high-speed SDIO.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260224074532.60046-1-phucduc.bui@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

...

This commit is contained in:

bui duc phuc 2026-02-24 14:45:32 +07:00 • committed by Geert Uytterhoeven

parent b2eaf45e12

commit 057c0944e0

1 changed files with 31 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

31

arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts

View file