diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
index 8b3ed73feb6e..46ce0722f98f 100644
--- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 
 #include "monaco.dtsi"
@@ -172,6 +173,26 @@
 	};
 };
 
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	fan_controller: fan-controller@2f {
+		compatible = "microchip,emc2305";
+		reg = <0x2f>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#pwm-cells = <3>;
+
+		fan: fan@0 {
+			reg = <0x0>;
+			pwms = <&fan_controller 26000 PWM_POLARITY_INVERTED 1>;
+			#cooling-cells = <2>;
+		};
+	};
+};
+
 &ethernet0 {
 	phy-mode = "2500base-x";
 	phy-handle = <&hsgmii_phy0>;
@@ -425,6 +446,27 @@
 	reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
 };
 
+&thermal_zones {
+	cpuss-0-0-thermal {
+		polling-delay = <2000>;
+
+		trips {
+			cpuss0_active: cpuss-active {
+				temperature = <32000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map-active {
+				trip = <&cpuss0_active>;
+				cooling-device = <&fan 0 THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
 &tlmm {
 	pcie0_default_state: pcie0-default-state {
 		wake-pins {