regulator: qcom-rpmh: readback voltage/bypass/mode set during bootup

Browse source

Currently, during regulator registration, regulator framework sends an
unnecessary `min-microvolts` request for the rpmh-regulator device. This
happens because in current design, we do not have a way to readback the
voltage settings that was set during the bootloader stage.

Fix this by using the rpmh_read() API to read the regulator voltage
settings done during boot and make it available to regulator framework
from the very first read after the bootup.

Also use this API to read the mode/bypass settings as well. This will
provide the regulator framework a sense of the initial settings done by
bootloader and thus preventing any redundant writes for any setting post
bootup incase the same setting was already applied during bootup.

Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801-b4-read-rpmh-v5-v6-3-9fcb54928523@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

...

This commit is contained in:

Kamal Wadhwa 2026-08-01 13:30:29 +05:30 • committed by Mark Brown

parent abd14bebb8

commit 09d99ff7fc

No known key found for this signature in database

GPG key ID: 24D68B725D5487D0

1 changed files with 120 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

120

drivers/regulator/qcom-rpmh-regulator.c

View file