arm64: dts: ls1043a: update USB nodes status to match board config

Browse source

ls1043a-rdb and ls1043a-qds board’s default HW config (such as
pin mux selection) would not enable some USB controllers’
data path, which causing over-current detected on those
controllers. This will hit the case of ‘xhci driver prevent bus suspend
if a root hub port detected over-current condition’, causing system
failed to be suspended. So disable them in device tree to resolve this
issue.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

...

This commit is contained in:

Ran Wang 2020-07-07 15:40:31 +08:00 • committed by Shawn Guo

parent 6386156eb2

commit 1069a0bbf9

3 changed files with 15 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

4

arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

View file

8

arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts

View file

3

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

View file