Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge drm-next for the reworked device register/unregistering.
Chris Wilson needs that to be able to land his i915 load/unload
demidlayering.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This commit is contained in:
Daniel Vetter 2016-06-24 08:29:45 +02:00
commit 10bb667223
134 changed files with 10229 additions and 4869 deletions

File diff suppressed because it is too large Load diff

1 Owner Module/Drivers Group Property Name Type Property Values Object attached Description/Restrictions
2 DRM Generic “rotation” BITMASK { 0, "rotate-0" }, { 1, "rotate-90" }, { 2, "rotate-180" }, { 3, "rotate-270" }, { 4, "reflect-x" }, { 5, "reflect-y" } CRTC, Plane rotate-(degrees) rotates the image by the specified amount in degrees in counter clockwise direction. reflect-x and reflect-y reflects the image along the specified axis prior to rotation
3 “scaling mode” ENUM { "None", "Full", "Center", "Full aspect" } Connector Supported by: amdgpu, gma500, i915, nouveau and radeon.
4 Connector “EDID” BLOB | IMMUTABLE 0 Connector Contains id of edid blob ptr object.
5 “DPMS” ENUM { “On”, “Standby”, “Suspend”, “Off” } Connector Contains DPMS operation mode value.
6 “PATH” BLOB | IMMUTABLE 0 Connector Contains topology path to a connector.
7 “TILE” BLOB | IMMUTABLE 0 Connector Contains tiling information for a connector.
8 “CRTC_ID” OBJECT DRM_MODE_OBJECT_CRTC Connector CRTC that connector is attached to (atomic)
9 Plane “type” ENUM | IMMUTABLE { "Overlay", "Primary", "Cursor" } Plane Plane type
10 “SRC_X” RANGE Min=0, Max=UINT_MAX Plane Scanout source x coordinate in 16.16 fixed point (atomic)
11 “SRC_Y” RANGE Min=0, Max=UINT_MAX Plane Scanout source y coordinate in 16.16 fixed point (atomic)
12 “SRC_W” RANGE Min=0, Max=UINT_MAX Plane Scanout source width in 16.16 fixed point (atomic)
13 “SRC_H” RANGE Min=0, Max=UINT_MAX Plane Scanout source height in 16.16 fixed point (atomic)
14 “CRTC_X” SIGNED_RANGE Min=INT_MIN, Max=INT_MAX Plane Scanout CRTC (destination) x coordinate (atomic)
15 “CRTC_Y” SIGNED_RANGE Min=INT_MIN, Max=INT_MAX Plane Scanout CRTC (destination) y coordinate (atomic)
16 “CRTC_W” RANGE Min=0, Max=UINT_MAX Plane Scanout CRTC (destination) width (atomic)
17 “CRTC_H” RANGE Min=0, Max=UINT_MAX Plane Scanout CRTC (destination) height (atomic)
18 “FB_ID” OBJECT DRM_MODE_OBJECT_FB Plane Scanout framebuffer (atomic)
19 “CRTC_ID” OBJECT DRM_MODE_OBJECT_CRTC Plane CRTC that plane is attached to (atomic)
20 DVI-I “subconnector” ENUM { “Unknown”, “DVI-D”, “DVI-A” } Connector TBD
21 “select subconnector” ENUM { “Automatic”, “DVI-D”, “DVI-A” } Connector TBD
22 TV “subconnector” ENUM { "Unknown", "Composite", "SVIDEO", "Component", "SCART" } Connector TBD
23 “select subconnector” ENUM { "Automatic", "Composite", "SVIDEO", "Component", "SCART" } Connector TBD
24 “mode” ENUM { "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc. Connector TBD
25 “left margin” RANGE Min=0, Max=100 Connector TBD
26 “right margin” RANGE Min=0, Max=100 Connector TBD
27 “top margin” RANGE Min=0, Max=100 Connector TBD
28 “bottom margin” RANGE Min=0, Max=100 Connector TBD
29 “brightness” RANGE Min=0, Max=100 Connector TBD
30 “contrast” RANGE Min=0, Max=100 Connector TBD
31 “flicker reduction” RANGE Min=0, Max=100 Connector TBD
32 “overscan” RANGE Min=0, Max=100 Connector TBD
33 “saturation” RANGE Min=0, Max=100 Connector TBD
34 “hue” RANGE Min=0, Max=100 Connector TBD
35 Virtual GPU “suggested X” RANGE Min=0, Max=0xffffffff Connector property to suggest an X offset for a connector
36 “suggested Y” RANGE Min=0, Max=0xffffffff Connector property to suggest an Y offset for a connector
37 Optional "aspect ratio" ENUM { "None", "4:3", "16:9" } Connector TDB
38 “dirty” ENUM | IMMUTABLE { "Off", "On", "Annotate" } Connector TBD
39 “DEGAMMA_LUT” BLOB 0 CRTC DRM property to set the degamma lookup table (LUT) mapping pixel data from the framebuffer before it is given to the transformation matrix. The data is an interpreted as an array of struct drm_color_lut elements. Hardware might choose not to use the full precision of the LUT elements nor use all the elements of the LUT (for example the hardware might choose to interpolate between LUT[0] and LUT[4]).
40 “DEGAMMA_LUT_SIZE” RANGE | IMMUTABLE Min=0, Max=UINT_MAX CRTC DRM property to gives the size of the lookup table to be set on the DEGAMMA_LUT property (the size depends on the underlying hardware).
41 “CTM” BLOB 0 CRTC DRM property to set the current transformation matrix (CTM) apply to pixel data after the lookup through the degamma LUT and before the lookup through the gamma LUT. The data is an interpreted as a struct drm_color_ctm.
42 “GAMMA_LUT” BLOB 0 CRTC DRM property to set the gamma lookup table (LUT) mapping pixel data after to the transformation matrix to data sent to the connector. The data is an interpreted as an array of struct drm_color_lut elements. Hardware might choose not to use the full precision of the LUT elements nor use all the elements of the LUT (for example the hardware might choose to interpolate between LUT[0] and LUT[4]).
43 “GAMMA_LUT_SIZE” RANGE | IMMUTABLE Min=0, Max=UINT_MAX CRTC DRM property to gives the size of the lookup table to be set on the GAMMA_LUT property (the size depends on the underlying hardware).
44 i915 Generic "Broadcast RGB" ENUM { "Automatic", "Full", "Limited 16:235" } Connector When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normaly in the range 0..1.0 are remapped to the range 16/255..235/255.
45 “audio” ENUM { "force-dvi", "off", "auto", "on" } Connector TBD
46 SDVO-TV “mode” ENUM { "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc. Connector TBD
47 "left_margin" RANGE Min=0, Max= SDVO dependent Connector TBD
48 "right_margin" RANGE Min=0, Max= SDVO dependent Connector TBD
49 "top_margin" RANGE Min=0, Max= SDVO dependent Connector TBD
50 "bottom_margin" RANGE Min=0, Max= SDVO dependent Connector TBD
51 “hpos” RANGE Min=0, Max= SDVO dependent Connector TBD
52 “vpos” RANGE Min=0, Max= SDVO dependent Connector TBD
53 “contrast” RANGE Min=0, Max= SDVO dependent Connector TBD
54 “saturation” RANGE Min=0, Max= SDVO dependent Connector TBD
55 “hue” RANGE Min=0, Max= SDVO dependent Connector TBD
56 “sharpness” RANGE Min=0, Max= SDVO dependent Connector TBD
57 “flicker_filter” RANGE Min=0, Max= SDVO dependent Connector TBD
58 “flicker_filter_adaptive” RANGE Min=0, Max= SDVO dependent Connector TBD
59 “flicker_filter_2d” RANGE Min=0, Max= SDVO dependent Connector TBD
60 “tv_chroma_filter” RANGE Min=0, Max= SDVO dependent Connector TBD
61 “tv_luma_filter” RANGE Min=0, Max= SDVO dependent Connector TBD
62 “dot_crawl” RANGE Min=0, Max=1 Connector TBD
63 SDVO-TV/LVDS “brightness” RANGE Min=0, Max= SDVO dependent Connector TBD
64 CDV gma-500 Generic "Broadcast RGB" ENUM { “Full”, “Limited 16:235” } Connector TBD
65 "Broadcast RGB" ENUM { “off”, “auto”, “on” } Connector TBD
66 Poulsbo Generic “backlight” RANGE Min=0, Max=100 Connector TBD
67 SDVO-TV “mode” ENUM { "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc. Connector TBD
68 "left_margin" RANGE Min=0, Max= SDVO dependent Connector TBD
69 "right_margin" RANGE Min=0, Max= SDVO dependent Connector TBD
70 "top_margin" RANGE Min=0, Max= SDVO dependent Connector TBD
71 "bottom_margin" RANGE Min=0, Max= SDVO dependent Connector TBD
72 “hpos” RANGE Min=0, Max= SDVO dependent Connector TBD
73 “vpos” RANGE Min=0, Max= SDVO dependent Connector TBD
74 “contrast” RANGE Min=0, Max= SDVO dependent Connector TBD
75 “saturation” RANGE Min=0, Max= SDVO dependent Connector TBD
76 “hue” RANGE Min=0, Max= SDVO dependent Connector TBD
77 “sharpness” RANGE Min=0, Max= SDVO dependent Connector TBD
78 “flicker_filter” RANGE Min=0, Max= SDVO dependent Connector TBD
79 “flicker_filter_adaptive” RANGE Min=0, Max= SDVO dependent Connector TBD
80 “flicker_filter_2d” RANGE Min=0, Max= SDVO dependent Connector TBD
81 “tv_chroma_filter” RANGE Min=0, Max= SDVO dependent Connector TBD
82 “tv_luma_filter” RANGE Min=0, Max= SDVO dependent Connector TBD
83 “dot_crawl” RANGE Min=0, Max=1 Connector TBD
84 SDVO-TV/LVDS “brightness” RANGE Min=0, Max= SDVO dependent Connector TBD
85 armada CRTC "CSC_YUV" ENUM { "Auto" , "CCIR601", "CCIR709" } CRTC TBD
86 "CSC_RGB" ENUM { "Auto", "Computer system", "Studio" } CRTC TBD
87 Overlay "colorkey" RANGE Min=0, Max=0xffffff Plane TBD
88 "colorkey_min" RANGE Min=0, Max=0xffffff Plane TBD
89 "colorkey_max" RANGE Min=0, Max=0xffffff Plane TBD
90 "colorkey_val" RANGE Min=0, Max=0xffffff Plane TBD
91 "colorkey_alpha" RANGE Min=0, Max=0xffffff Plane TBD
92 "colorkey_mode" ENUM { "disabled", "Y component", "U component" , "V component", "RGB", “R component", "G component", "B component" } Plane TBD
93 "brightness" RANGE Min=0, Max=256 + 255 Plane TBD
94 "contrast" RANGE Min=0, Max=0x7fff Plane TBD
95 "saturation" RANGE Min=0, Max=0x7fff Plane TBD
96 exynos CRTC “mode” ENUM { "normal", "blank" } CRTC TBD
97 Overlay “zpos” RANGE Min=0, Max=MAX_PLANE-1 Plane TBD
98 i2c/ch7006_drv Generic “scale” RANGE Min=0, Max=2 Connector TBD
99 TV “mode” ENUM { "PAL", "PAL-M","PAL-N"}, ”PAL-Nc" , "PAL-60", "NTSC-M", "NTSC-J" } Connector TBD
100 nouveau NV10 Overlay "colorkey" RANGE Min=0, Max=0x01ffffff Plane TBD
101 “contrast” RANGE Min=0, Max=8192-1 Plane TBD
102 “brightness” RANGE Min=0, Max=1024 Plane TBD
103 “hue” RANGE Min=0, Max=359 Plane TBD
104 “saturation” RANGE Min=0, Max=8192-1 Plane TBD
105 “iturbt_709” RANGE Min=0, Max=1 Plane TBD
106 Nv04 Overlay “colorkey” RANGE Min=0, Max=0x01ffffff Plane TBD
107 “brightness” RANGE Min=0, Max=1024 Plane TBD
108 Display “dithering mode” ENUM { "auto", "off", "on" } Connector TBD
109 “dithering depth” ENUM { "auto", "off", "on", "static 2x2", "dynamic 2x2", "temporal" } Connector TBD
110 “underscan” ENUM { "auto", "6 bpc", "8 bpc" } Connector TBD
111 “underscan hborder” RANGE Min=0, Max=128 Connector TBD
112 “underscan vborder” RANGE Min=0, Max=128 Connector TBD
113 “vibrant hue” RANGE Min=0, Max=180 Connector TBD
114 “color vibrance” RANGE Min=0, Max=200 Connector TBD
115 omap Generic “zorder” RANGE Min=0, Max=3 CRTC, Plane TBD
116 qxl Generic “hotplug_mode_update" RANGE Min=0, Max=1 Connector TBD
117 radeon DVI-I “coherent” RANGE Min=0, Max=1 Connector TBD
118 DAC enable load detect “load detection” RANGE Min=0, Max=1 Connector TBD
119 TV Standard "tv standard" ENUM { "ntsc", "pal", "pal-m", "pal-60", "ntsc-j" , "scart-pal", "pal-cn", "secam" } Connector TBD
120 legacy TMDS PLL detect "tmds_pll" ENUM { "driver", "bios" } - TBD
121 Underscan "underscan" ENUM { "off", "on", "auto" } Connector TBD
122 "underscan hborder" RANGE Min=0, Max=128 Connector TBD
123 "underscan vborder" RANGE Min=0, Max=128 Connector TBD
124 Audio “audio” ENUM { "off", "on", "auto" } Connector TBD
125 FMT Dithering “dither” ENUM { "off", "on" } Connector TBD
126 rcar-du Generic "alpha" RANGE Min=0, Max=255 Plane TBD
127 "colorkey" RANGE Min=0, Max=0x01ffffff Plane TBD
128 "zpos" RANGE Min=1, Max=7 Plane TBD

Some files were not shown because too many files have changed in this diff Show more