ARM: dts: stm32: fix stusb1600 pinctrl used on stm32mp157c-dk

Browse source

A pinctrl handle is used to setup a pull-up on the stusb1600 IRQ pin (that
is open drain).
When in ANALOG state, no pull-up can be applied in the GPIO HW controller,
still the setting is done into the register. The pull-up is effective
currently, only when the GPIO IRQ is requested. The correct setting is to
use directly the GPIO, instead of ANALOG state.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

...

This commit is contained in:

Fabrice Gasnier 2021-11-26 12:33:40 +01:00 • committed by Alexandre Torgue

parent 28f645fc94

commit 1149ccc5e8

1 changed files with 1 additions and 1 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

2

arch/arm/boot/dts/stm32mp15-pinctrl.dtsi

View file